| Age | Commit message (Collapse) | Author |
|---|
|
instead, make it a helper function, defined in target.cfg
this means that we can also do the same with other projects
in the future, and it is expected that we will have to.
these helper functions are used in cases where we want
additional actions to be performed.
actually, the helper could be anything. for example, you
could write:
mkhelper="./build foo bar"
and it would do that (at the point of execution, PWD
is the root directory of the build system)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
don't hardcode the check based on whether the current
project is grub. instead, define "btype" in target.cfg
if unset, we assume kconfig and permit kconfig commands
e.g. make menuconfig, make silentoldconfig, etc
this is to avoid the deadliest of sins:
project-specific hacks
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is bloat, because it's something the user can already
do at runtime configuration anyway.
set it to a reasonable default of 8 seconds instead of 5,
and don't honour the timeout variable in target.cfg.
this will be documented in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the background is only a few kb. the whole rationale
before was to limit the space used in memdisk, but this
decision was made when the background was much bigger;
it has since been optimised greatly, and the grub modules
were heavily reduce, so it should be safe.
grub's memdisk breaks when you add too much data to it.
as part of simplifying the rest of lbmk, this change removes
some more bloat from the rest of lbmk. handling this in the
memdisk is much simpler than handling it with cbfstool.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove nvme support from the "default" grub tree
now there are three trees:
* default: no xhci or nvme patches
* nvme: contains nvme support
* xhci: contains xhci and nvme support
this is in case a bug like lbmk issue #216 ever occurs
again, as referenced before during lbmk audit 5
there is no indication that the nvme patch causes any
issues, but after previous experience i want to be sure
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
certain code checks for build.list, to skip it, for
example in items()
we already use config/data/grub to store grub config data
that applied to all trees
create these directories too:
config/data/coreboot
config/data/u-boot
config/data/seabios
move the respective build.list files in here, and also
to config/data/grub
now multi-tree projects contain, per directory, just the
target.cfg file and the patches directory. this is much
cleaner, because some of the logic can be simplified more
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Re-add xHCI only on haswell and broadwell machines, where
they are needed. Otherwise, keep the same GRUB code.
The xHCI patches were removed because they caused issues
on Sandybridge-based Dell Latitude laptops. See:
https://codeberg.org/libreboot/lbmk/issues/216
The issue was not reported elsewhere, including on the
Haswell/Broadwell hardware where they are needed, but the
build system could only build one version of GRUB.
The older machines do not need xHCI patches, because they
either do not have xHCI patches, or work (in GRUB) because
they're in EHCI mode when running the payload.
So, the problem is that we need the xHCI patches for GRUB
on Haswell/Broadwell hardware, but the patches break
Sandybridge hardware, and we only had the one build of GRUB.
To mitigate this problem, the build system now supports
building multiple revisions of GRUB, with different patches,
and each given coreboot target can say which GRUB tree to use
by setting this in target.cfg:
grubtree="xhci"
In the above example, the "xhci" tree would be used. Some
generic GRUB config has been moved to config/data/grub/
and config/grub/ now looks like config/coreboot/ - also,
the grub.cfg file (named "payload" in each tree) is copied
to the GRUB source tree as ".config", then added to GRUB's
memdisk in the same way, as grub.cfg.
Several other design changes had to be made because of this:
* grub.cfg in memdisk no longer automatically jumps to one
in CBFS, but now shows a menuentry for it if available
* Certain commands in script/trees are disabled for GRUB,
such as *config make commands.
* gnulib is now defined in config/submodule/grub/, instead
of config/git/grub - and this mitigates an existing bug
where downloading gnulib first would make grub no longer
possible to download in lbmk.
The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been
re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF,
Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should
work again in GRUB.
The GRUB payload has been re-enabled on HP EliteBook 820 G2.
This change will enable per-board GRUB optimisation in the
future. For example, we hardcode what partitions and LVMs
GRUB scans because * is slow on ICH7-based machines, due
to GRUB's design. On other machines, * is reasonably fast,
for automatically enumerating the list of devices for boot.
Use of * (and other wildcards) could enable our GRUB payload
to automatically boot more distros, with minimal fuss. This
can be done at a later date, in subsequent revisions.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
very unlikely to exist. in fact, should i remove it?
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's very unlikely that someone would use this
directory name nowadays, and i had half a mind
to remove it altogether
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in practise, the machines we support don't have
the option of including so many disks; 8 seems like
the most reasonable default. additionally, it's
unreasonable to expect *20 partitions*
this hardcoding is done to avoid using *, which is
slow in grub on some machines (the grub kernel always
re-enumerates the devices during every operation,
without caching any of it)
yet, the hardcoding is also slow; balance it a bit
better by searching fewer permutations, but not so few
that it would likely break a lot of setups
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we already supported syslinux but not grub
support grub by scanning for the most common paths,
based on the most popular distros
we don't hardcode this with * because it slows down
the boot, and in practise many distros still use the
same grub.cfg location as in BIOS systems (the EFI
one is often just a link to the BIOS one)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in the next revision, i will add ESP paths
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is a relic from the old days when we didn't
automated the grub.cfg logic as much. these days,
the grub.cfg logic is able to boot almost all distros
without any manual intervention or override.
removing these entries will speed up the boot in general
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the path "/boot/EFI" is unnecessary because the ESP
is always a FAT32 partition, so we don't need to
scan it as a subdirectory within a subdirectory.
the ESP is always mounted as its own partition,
FAT32, and EFI/ is always at the root of it
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the esp is always a fat32 partition so this makes no sensgrub.cfg: don't scan EFI on btrfs subvols
the esp is always a fat32 partition so this makes no sense
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
replace variables ahcidev/atadev/nvmedev with a single
one named bootdev
the for loop goes through grub_scan_disk, so now it is
effectively a bootorder configuration
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it has always been gpl 3 or later, but it helps to have
the license declaration within the file
there's a copying file anyway. put spdx in the config
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Previously, grub_scan_disk could set ata, ahci or "both",
which would make both be tried (ahci first). This worked
when we only dealt with ata and ahci devices, but now we
support nvme devices so the logic is inherently flawed.
Instead, use grub_scan_disk to store the boot order, e.g.:
grub_scan_disk="ahci nvme ata"
grub_scan_disk="nvme ata"
In the first example, it would make GRUB scan ahci first,
then nvme and then ata.
In the secontd example, it would make GRUB scan nvme first,
and then ata.
If "both" is set, or anything other than ahci/ata/nvme,
grub_scan_disk is now changed to "nvme ahci ata".
Actual grub_scan_disk entries in target.cfg files will now
be modified, to match each machine.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Fixes this bug:
https://codeberg.org/libreboot/lbmk/issues/216
Well, fix is the wrong word. We want xHCI ideally.
Mate is working on it as I write this. I've also:
* Disabled CONFIG_FINALIZE_USB_ROUTE_XHCI on Haswell
boards (coreboot)
* Disabled the GRUB payload on HP 820 G2 for now
We will need to re-add the xHCI patches once fixed.
If Mate/we can't fix it, I'll contact Patrick
Rudolph who originally wrote the xHCI patches.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
mkukri/lbmk:master into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/213
|
|
|
|
mkukri/lbmk:master into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/212
|
|
Tested on OptiPlex 3050 (via injecting grub2.elf into WIP coreboot
port).
|
|
Signed-off-by: samuraikid <samuraikid@noreply.codeberg.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
for enabling/disabling serial, spkmodem and gfxterm' (#203) from livio/lbmk:failsafe into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/203
|
|
livio/lbmk:livio_290424 into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/204
|
|
|
|
serial, spkmodem and gfxterm
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
see:
https://github.com/9elements/grub/commits/xhci-module-upstreaming-squash_v4/
grub only supports xhci on bios/uefi targets, but not coreboot.
some newer machines don't have ps/2 controllers, and boot in a
way where ehci isn't available at startup; the controller can't
be used by ehci code, there must be xhci support.
the code is from Patrick Rudolph working on behalf of 9elements.
the code was also sent here for review:
https://lists.gnu.org/archive/html/grub-devel/2020-12/msg00111.html
however, upstream never merged these patches. libreboot will have
to maintain these from now on. the patches have been rebased for
use with grub 2.12.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i meant to push it in configure args, not bootstrap
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
work around build issues on very bleeding edge distros
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
There is no need to add multiple keymap files, because
GRUB can load keymaps from CBFS. The current build logic
is designed to avoid building multiple GRUB binaries,
which are expensive computationally because each one
would then have to be compressed for each board.
This patch provides the best of both worlds: less space
used in flash like in the old lbmk design (1 keymap per
board), but retaining the current build speeds and therefore
not re-introducing the slowness of lbmk's previous GRUB
build logic.
The grub.cfg file has been modified, accordingly. It now
only loads a keymap.gkb file from CBFS, by default. It does
this, only if that file exists; if not, GRUB already defaults
to US Qwerty layout anyway.
ALSO: compress all keymap gkb files with xz -6
GRUB automatically decompresses files when accessed.
This results in about 2KB of flash space saved in CBFS.
Here is real-world data, showing the increased flash space:
< fallback/payload 0x3eb80 simple elf 548821 none
< keymap.cfg 0xc4bc0 raw 16 none
< (empty) 0xc4c00 null 11633316 none
---
> fallback/payload 0x3eb80 simple elf 546787 none
> keymap.gkb 0xc43c0 raw 344 none
> (empty) 0xc4540 null 11635044 none
This was taken by diffing the cbfstool "print" output,
both before and after. The *after* result is with this change.
11633316. In this example, 1728 bytes have been saved. Therefore,
with compression taken into account, this patch saves about 1.7KB
of space in CBFS.
This change means that lbmk can now scale to support hundreds
of keymaps, without increasing the amount of flash space used,
in each given image. Since the keymap files are compressed in
lbmk.git, in advance, we spend no additional time on compression
at build time. The resulting change in build speed in negligible.
Adding your own keymap.gkb file was already possible, for changing
the keymap in libreboot images, if you didn't want to change the
memdisk (and thus re-compile grub.elf). Now, this is the default
behaviour, and the only way to do it. It's much more efficient.
The original keymap files can be restored, by running unxz.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is now used in grub, for the FS_PAYLOAD_MODULES
option in the make command
lbmk should generalise as much logic as possible. in
some parts of it, logic is hurrently hardcoded, specific
to a given project that lbmk uses, but lbmk is essentially
a source-based package manager, like what you might find
on a small linux distro, so we need to try to
be as generic as possible.
lbmk is the "build system of build systems", so it has to
work generically with as many of them as possible
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
at present, the bootstrap and configure script is only
directly executed for grub, because grub is the only
project that uses them in lbmk
however, when i start adding linuxboot support, i will
have to start building a lot of projects, some of which
make use autoconf and bootstrap scripts
e.g.
./bootstrap --foo
./configure --bar
the "bootstrap" script is often used on GNU programs,
because they like to over-engineer absolutely everything
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
there are special menuentries just for loading
configs, without handling luks, lvm and whatnot.
it's intended for users of cd/dvd drives. well,
now we support both extlinux and grub, with this patch.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
many modern distros use grub in their installer images,
so scan for grub.cfg first.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
isolinux/syslinux/extlinux config files should all work,
using the syslinux parser function in grub
the current behaviour is to only search for grub.cfg,
so extlinux users can't use the default libreboot setup.
with this change, their systems should hopefully work.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the so-called EFI System Partition (ESP) is used
on many UEFI-based setups. some users may be
migrating to libreboot, so let's support it.
on BIOS setups, it would be e.g.
/boot/syslinux/syslinux.conf
on UEFI setups, it would be e.g.
/boot/EFI/syslinux/syslinux.conf
additionally, support scanning for extlinux.conf
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the fallback code in the main menuentry is
potentially unsafe, depending on user config.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lvm/* is slow to resolve in grub, on some machines,
because grub enumeration is very slow in general.
however, many people will install distros with any
number of lvm configurations, so we should try to
support them.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This reverts commit 20389655e42e62ebf6d96dd106c91fbe74282557.
If the user actually has encryption, but has /boot unencrypted,
this will considerably slow down the boot, so the patch has
been reverted.
The patch was originally meant to favour encrypted /boot
setups, but the old behaviour also still works there.
|
