summaryrefslogtreecommitdiff
path: root/config/grub
diff options
context:
space:
mode:
authorLeah Rowe <leah@libreboot.org>2024-06-12 00:58:22 +0100
committerLeah Rowe <leah@libreboot.org>2024-06-12 00:58:22 +0100
commit0b37653ab908093a108cfe3cbcb4e8d378428d26 (patch)
tree4fd3b33c728b8c8aed5b6b3df7867c02b8887b71 /config/grub
parent1952db55540606b2fb00ddd4be9e358dbc99ef8b (diff)
grub: only enable nvme if needed on a board
remove nvme support from the "default" grub tree now there are three trees: * default: no xhci or nvme patches * nvme: contains nvme support * xhci: contains xhci and nvme support this is in case a bug like lbmk issue #216 ever occurs again, as referenced before during lbmk audit 5 there is no indication that the nvme patch causes any issues, but after previous experience i want to be sure Signed-off-by: Leah Rowe <leah@libreboot.org>
Diffstat (limited to 'config/grub')
-rw-r--r--config/grub/default/config/payload20
-rw-r--r--config/grub/nvme/config/payload289
-rw-r--r--config/grub/nvme/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch90
-rw-r--r--config/grub/nvme/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch25
-rw-r--r--config/grub/nvme/patches/0002-luks2/0003-Add-CC0-license.patch42
-rw-r--r--config/grub/nvme/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch39
-rw-r--r--config/grub/nvme/patches/0002-luks2/0005-Add-Argon2-algorithm.patch2611
-rw-r--r--config/grub/nvme/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch58
-rw-r--r--config/grub/nvme/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch83
-rw-r--r--config/grub/nvme/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch26
-rw-r--r--config/grub/nvme/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch107
-rw-r--r--config/grub/nvme/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch38
-rw-r--r--config/grub/nvme/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch102
-rw-r--r--config/grub/nvme/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch34
-rw-r--r--config/grub/nvme/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch31
-rw-r--r--config/grub/nvme/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch (renamed from config/grub/default/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch)0
-rw-r--r--config/grub/nvme/target.cfg5
17 files changed, 3581 insertions, 19 deletions
diff --git a/config/grub/default/config/payload b/config/grub/default/config/payload
index f81d5930..a405ae25 100644
--- a/config/grub/default/config/payload
+++ b/config/grub/default/config/payload
@@ -54,7 +54,7 @@ if [ -f (cbfsdisk)/timeout.cfg ]; then
else
set timeout=5
fi
-set grub_scan_disk="nvme ahci ata"
+set grub_scan_disk="ahci ata"
if [ -f (cbfsdisk)/scan.cfg ]; then
source (cbfsdisk)/scan.cfg
fi
@@ -87,17 +87,11 @@ function search_grub {
for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
if [ "${1}" != "nvme" ]; then
try_user_config "(${1}${i},${part})"
- else
- # TODO: do we care about other namesapces
- try_user_config "(nvme${i}n1,${part})"
fi
done
if [ "${1}" != "nvme" ]; then
# raw devices e.g. (ahci0) instead of (ahci0,1)
try_user_config "(${1}${i})"
- else
- # TODO: do we care about other namesapces
- try_user_config "(nvme${i}n1)"
fi
done
echo # Insert newline
@@ -123,17 +117,11 @@ function search_isolinux {
for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
if [ "${1}" != "nvme" ]; then
try_isolinux_config "(${1}${i},${part})"
- else
- # TODO: see above
- try_isolinux_config "(nvme${i}n1,${part})"
fi
done
if [ "${1}" != "nvme" ]; then
# raw devices e.g. (usb0) instead of (usb0,1)
try_isolinux_config "(${1}${i})"
- else
- # TODO: do we care about other namesapces
- try_isolinux_config "(nvme${i}n1)"
fi
done
echo # Insert newline
@@ -175,9 +163,6 @@ menuentry 'Load Operating System (incl. fully encrypted disks) [o]' --hotkey='o
bootdev="${bootdev} (ahci${i},${part})"
elif [ "${grub_disk}" = "ata" ]; then
bootdev="${bootdev} (ata${i},${part})"
- elif [ "${grub_disk}" = "nvme" ]; then
- # TODO: do we care about other namesapces
- bootdev="${bootdev} (nvme${i}n1,${part})"
fi
done
done
@@ -214,9 +199,6 @@ menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on AHCI [a]' --hotkey='a'
menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE [d]' --hotkey='d' {
search_bootcfg ata
}
-menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe [e]' --hotkey='e' {
- search_bootcfg nvme
-}
if [ -f (cbfsdisk)/grub.cfg ]; then
menuentry 'Load configuration (grub.cfg) in CBFS [t]' --hotkey='t' {
set root='(cbfsdisk)'
diff --git a/config/grub/nvme/config/payload b/config/grub/nvme/config/payload
new file mode 100644
index 00000000..f81d5930
--- /dev/null
+++ b/config/grub/nvme/config/payload
@@ -0,0 +1,289 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+# Copyright (C) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org>
+# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org>
+
+set prefix=(memdisk)/boot/grub
+
+insmod at_keyboard
+insmod usb_keyboard
+insmod nativedisk
+insmod ehci
+insmod ohci
+insmod uhci
+insmod usb
+insmod usbms
+insmod regexp
+
+terminal_input --append at_keyboard
+terminal_input --append usb_keyboard
+terminal_output --append cbmemc
+
+# User interface overrides wherever "keystatus" is supported
+# Keep SHIFT key pressed before powering on to disable graphics
+if keystatus --shift; then
+ terminal_output --append vga_text
+else
+ gfxpayload=keep
+ terminal_output --append gfxterm
+
+ if [ -f (cbfsdisk)/background.png ]; then
+ insmod png
+ background_image (cbfsdisk)/background.png
+ elif [ -f (cbfsdisk)/background.jpg ]; then
+ insmod jpeg
+ background_image (cbfsdisk)/background.jpg
+ fi
+fi
+
+# Keep CTRL pressed to enable default serial terminal (COM1 or the like)
+if keystatus --ctrl; then
+ serial
+ terminal_input --append serial
+ terminal_output --append serial
+fi
+
+# Keep ALT pressed to enable spkmodem
+if keystatus --alt; then
+ terminal_output --append spkmodem
+fi
+
+
+set default="0"
+if [ -f (cbfsdisk)/timeout.cfg ]; then
+ source (cbfsdisk)/timeout.cfg
+else
+ set timeout=5
+fi
+set grub_scan_disk="nvme ahci ata"
+if [ -f (cbfsdisk)/scan.cfg ]; then
+ source (cbfsdisk)/scan.cfg
+fi
+
+if [ -f (cbfsdisk)/keymap.gkb ]; then
+ keymap (cbfsdisk)/keymap.gkb
+fi
+
+function really_try_user_config {
+ set root="${1}"
+
+ if [ -f /"${2}"/grub.cfg ]; then
+ unset superusers
+ configfile /"${2}"/grub.cfg
+ fi
+}
+
+function try_user_config {
+ # The @/... entries are for cases where the BTRFS filesystem is being used
+ for dir in grub boot/grub @/grub @/boot/grub grub2 boot/grub2 @/grub2 @/boot/grub2 boot @/boot; do
+ really_try_user_config "${1}" "${dir}"
+ done
+ for dir in ubuntu debian redhat; do
+ really_try_user_config "${1}" "EFI/${dir}"
+ done
+}
+function search_grub {
+ echo -n "Attempting to load grub.cfg from '${1}' devices"
+ for i in 0 1 2 3 4 5 6 7 8; do
+ for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+ if [ "${1}" != "nvme" ]; then
+ try_user_config "(${1}${i},${part})"
+ else
+ # TODO: do we care about other namesapces
+ try_user_config "(nvme${i}n1,${part})"
+ fi
+ done
+ if [ "${1}" != "nvme" ]; then
+ # raw devices e.g. (ahci0) instead of (ahci0,1)
+ try_user_config "(${1}${i})"
+ else
+ # TODO: do we care about other namesapces
+ try_user_config "(nvme${i}n1)"
+ fi
+ done
+ echo # Insert newline
+}
+
+function try_isolinux_config {
+ set root="${1}"
+ for dir in '' /boot /EFI /@ /@/boot; do
+ if [ -f "${dir}"/isolinux/isolinux.cfg ]; then
+ syslinux_configfile -i "${dir}"/isolinux/isolinux.cfg
+ elif [ -f "${dir}"/syslinux/syslinux.cfg ]; then
+ syslinux_configfile -s "${dir}"/syslinux/syslinux.cfg
+ elif [ -f "${dir}"/syslinux/extlinux.conf ]; then
+ syslinux_configfile -s "${dir}"/syslinux/extlinux.conf
+ elif [ -f "${dir}"/extlinux/extlinux.conf ]; then
+ syslinux_configfile -s "${dir}"/extlinux/extlinux.conf
+ fi
+ done
+}
+function search_isolinux {
+ echo "\nAttempting to parse iso/sys/extlinux config from '${1}' devices"
+ for i in 0 1 2 3 4 5 6 7 8; do
+ for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+ if [ "${1}" != "nvme" ]; then
+ try_isolinux_config "(${1}${i},${part})"
+ else
+ # TODO: see above
+ try_isolinux_config "(nvme${i}n1,${part})"
+ fi
+ done
+ if [ "${1}" != "nvme" ]; then
+ # raw devices e.g. (usb0) instead of (usb0,1)
+ try_isolinux_config "(${1}${i})"
+ else
+ # TODO: do we care about other namesapces
+ try_isolinux_config "(nvme${i}n1)"
+ fi
+ done
+ echo # Insert newline
+}
+function try_bootcfg {
+ try_user_config "${1}"
+ try_isolinux_config "${1}"
+}
+function search_bootcfg {
+ search_grub "${1}"
+ search_isolinux "${1}"
+}
+menuentry 'Load Operating System (incl. fully encrypted disks) [o]' --hotkey='o' {
+
+ for grub_disk in ${grub_scan_disk}; do
+ search_bootcfg ${grub_disk}
+ done
+
+ # grub device enumeration is very slow, so checks are hardcoded
+
+ # TODO: add more strings, based on what distros set up when
+ # the user select auto-partitioning on those installers
+ lvmvol="lvm/grubcrypt-bootvol lvm/grubcrypt-rootvol"
+
+ raidvol="md/0 md/1 md/2 md/3 md/4 md/5 md/6 md/7 md/8 md/9"
+
+ # in practise, doing multiple redundant checks is perfectly fast and
+ # TODO: optimize grub itself, and use */? here for everything
+
+ for vol in ${lvmvol} ${raidvol} ; do
+ try_bootcfg "${vol}"
+ done
+
+ unset bootdev
+ for grub_disk in ${grub_scan_disk}; do
+ for i in 0 1 2 3 4 5 6 7 8; do
+ for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+ if [ "${grub_disk}" = "ahci" ]; then
+ bootdev="${bootdev} (ahci${i},${part})"
+ elif [ "${grub_disk}" = "ata" ]; then
+ bootdev="${bootdev} (ata${i},${part})"
+ elif [ "${grub_disk}" = "nvme" ]; then
+ # TODO: do we care about other namesapces
+ bootdev="${bootdev} (nvme${i}n1,${part})"
+ fi
+ done
+ done
+ done
+
+ set pager=0
+ echo -n "Attempting to unlock encrypted volumes"
+ for dev in ${bootdev} ${lvmvol} ${raidvol}; do
+ if cryptomount "${dev}" ; then break ; fi
+ done
+ set pager=1
+ echo
+
+ # after cryptomount, lvm volumes might be available
+ for vol in ${lvmvol}; do
+ try_bootcfg "${vol}"
+ done
+
+ search_bootcfg crypto
+
+ for vol in lvm/* ; do
+ try_bootcfg "${vol}"
+ done
+
+ true # Prevent pager requiring to accept each line instead of whole screen
+}
+
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on USB [s]' --hotkey='s' {
+ search_bootcfg usb
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on AHCI [a]' --hotkey='a' {
+ search_bootcfg ahci
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE [d]' --hotkey='d' {
+ search_bootcfg ata
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe [e]' --hotkey='e' {
+ search_bootcfg nvme
+}
+if [ -f (cbfsdisk)/grub.cfg ]; then
+menuentry 'Load configuration (grub.cfg) in CBFS [t]' --hotkey='t' {
+ set root='(cbfsdisk)'
+ if [ -f /grub.cfg ]; then
+ configfile /grub.cfg
+ fi
+}
+fi
+if [ -f (cbfsdisk)/grubtest.cfg ]; then
+menuentry 'Load test configuration (grubtest.cfg) inside of CBFS [t]' --hotkey='t' {
+ set root='(cbfsdisk)'
+ if [ -f /grubtest.cfg ]; then
+ configfile /grubtest.cfg
+ fi
+}
+fi
+if [ -f (cbfsdisk)/seabios.elf ]; then
+menuentry 'Load SeaBIOS (payload) [b]' --hotkey='b' {
+ set root='cbfsdisk'
+ chainloader /seabios.elf
+}
+fi
+if [ -f (cbfsdisk)/img/grub2 ]; then
+menuentry 'Return to SeaBIOS [b]' --hotkey='b' {
+ set root='cbfsdisk'
+ chainloader /fallback/payload
+}
+fi
+menuentry 'Poweroff [p]' --hotkey='p' {
+ halt
+}
+menuentry 'Reboot [r]' --hotkey='r' {
+ reboot
+}
+if [ -f (cbfsdisk)/img/memtest ]; then
+menuentry 'Load MemTest86+ [m]' --hotkey='m' {
+ set root='cbfsdisk'
+ chainloader /img/memtest
+}
+fi
+
+submenu 'Other [z]' --hotkey='z' {
+ menuentry 'Enable default serial terminal [s]' --hotkey='s' {
+ serial
+ terminal_input --append serial
+ terminal_output --append serial
+ }
+
+ menuentry 'Disable default serial terminal' {
+ terminal_input --remove serial
+ terminal_output --remove serial
+ }
+
+ menuentry 'Enable gfxterm' {
+ terminal_output --append gfxterm
+ terminal_output --remove vga_text
+ }
+ menuentry 'Disable gfxterm [g]' --hotkey='g' {
+ terminal_output --remove gfxterm
+ terminal_output --append vga_text
+ }
+
+ menuentry 'Enable spkmodem [a]' --hotkey='a' {
+ terminal_output --append spkmodem
+ }
+
+ menuentry 'Disable spkmodem [z]' --hotkey='z' {
+ terminal_output --remove spkmodem
+ }
+}
diff --git a/config/grub/nvme/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch b/config/grub/nvme/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch
new file mode 100644
index 00000000..183f5a91
--- /dev/null
+++ b/config/grub/nvme/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch
@@ -0,0 +1,90 @@
+From ce13539fe2103abbd991814d995e06cf96e485f7 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 31 Oct 2021 03:47:05 +0000
+Subject: [PATCH 1/3] mitigate grub's missing characters for borders/arrow
+ characters
+
+This cleans up the display on the main screen in GRUB.
+
+Just don't draw a border, at all.
+---
+ grub-core/normal/menu_text.c | 49 ++----------------------------------
+ 1 file changed, 2 insertions(+), 47 deletions(-)
+
+diff --git a/grub-core/normal/menu_text.c b/grub-core/normal/menu_text.c
+index b1321eb26..e76094dfd 100644
+--- a/grub-core/normal/menu_text.c
++++ b/grub-core/normal/menu_text.c
+@@ -108,47 +108,6 @@ grub_print_message_indented (const char *msg, int margin_left, int margin_right,
+ grub_print_message_indented_real (msg, margin_left, margin_right, term, 0);
+ }
+
+-static void
+-draw_border (struct grub_term_output *term, const struct grub_term_screen_geometry *geo)
+-{
+- int i;
+-
+- grub_term_setcolorstate (term, GRUB_TERM_COLOR_NORMAL);
+-
+- grub_term_gotoxy (term, (struct grub_term_coordinate) { geo->first_entry_x - 1,
+- geo->first_entry_y - 1 });
+- grub_putcode (GRUB_UNICODE_CORNER_UL, term);
+- for (i = 0; i < geo->entry_width + 1; i++)
+- grub_putcode (GRUB_UNICODE_HLINE, term);
+- grub_putcode (GRUB_UNICODE_CORNER_UR, term);
+-
+- for (i = 0; i < geo->num_entries; i++)
+- {
+- grub_term_gotoxy (term, (struct grub_term_coordinate) { geo->first_entry_x - 1,
+- geo->first_entry_y + i });
+- grub_putcode (GRUB_UNICODE_VLINE, term);
+- grub_term_gotoxy (term,
+- (struct grub_term_coordinate) { geo->first_entry_x + geo->entry_width + 1,
+- geo->first_entry_y + i });
+- grub_putcode (GRUB_UNICODE_VLINE, term);
+- }
+-
+- grub_term_gotoxy (term,
+- (struct grub_term_coordinate) { geo->first_entry_x - 1,
+- geo->first_entry_y - 1 + geo->num_entries + 1 });
+- grub_putcode (GRUB_UNICODE_CORNER_LL, term);
+- for (i = 0; i < geo->entry_width + 1; i++)
+- grub_putcode (GRUB_UNICODE_HLINE, term);
+- grub_putcode (GRUB_UNICODE_CORNER_LR, term);
+-
+- grub_term_setcolorstate (term, GRUB_TERM_COLOR_NORMAL);
+-
+- grub_term_gotoxy (term,
+- (struct grub_term_coordinate) { geo->first_entry_x - 1,
+- (geo->first_entry_y - 1 + geo->num_entries
+- + GRUB_TERM_MARGIN + 1) });
+-}
+-
+ static int
+ print_message (int nested, int edit, struct grub_term_output *term, int dry_run)
+ {
+@@ -167,10 +126,8 @@ command-line or ESC to discard edits and return to the GRUB menu."),
+ {
+ char *msg_translated;
+
+- msg_translated = grub_xasprintf (_("Use the %C and %C keys to select which "
+- "entry is highlighted."),
+- GRUB_UNICODE_UPARROW,
+- GRUB_UNICODE_DOWNARROW);
++ msg_translated = grub_xasprintf (_("Use the arrow keys to select which "
++ "entry is highlighted."));
+ if (!msg_translated)
+ return 0;
+ ret += grub_print_message_indented_real (msg_translated, STANDARD_MARGIN,
+@@ -410,8 +367,6 @@ grub_menu_init_page (int nested, int edit,
+
+ grub_term_normal_color = grub_color_menu_normal;
+ grub_term_highlight_color = grub_color_menu_highlight;
+- if (geo->border)
+- draw_border (term, geo);
+ grub_term_normal_color = old_color_normal;
+ grub_term_highlight_color = old_color_highlight;
+ geo->timeout_y = geo->first_entry_y + geo->num_entries
+--
+2.25.1
+
diff --git a/config/grub/nvme/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch b/config/grub/nvme/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch
new file mode 100644
index 00000000..6ff97979
--- /dev/null
+++ b/config/grub/nvme/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch
@@ -0,0 +1,25 @@
+From 70f9e72c3ff6381fe3519612de3b649c0cf26b9a Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sat, 19 Nov 2022 16:30:24 +0000
+Subject: [PATCH 2/3] say the name libreboot, in the grub menu
+
+---
+ grub-core/normal/main.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/grub-core/normal/main.c b/grub-core/normal/main.c
+index bd4431000..31308e16a 100644
+--- a/grub-core/normal/main.c
++++ b/grub-core/normal/main.c
+@@ -209,7 +209,7 @@ grub_normal_init_page (struct grub_term_output *term,
+
+ grub_term_cls (term);
+
+- msg_formatted = grub_xasprintf (_("GNU GRUB version %s"), PACKAGE_VERSION);
++ msg_formatted = grub_xasprintf (_("Libreboot 20240504 release, based on coreboot. https://libreboot.org/"));
+ if (!msg_formatted)
+ return;
+
+--
+2.25.1
+
diff --git a/config/grub/nvme/patches/0002-luks2/0003-Add-CC0-license.patch b/config/grub/nvme/patches/0002-luks2/0003-Add-CC0-license.patch
new file mode 100644
index 00000000..dc9060c3
--- /dev/null
+++ b/config/grub/nvme/patches/0002-luks2/0003-Add-CC0-license.patch
@@ -0,0 +1,42 @@
+From de6e7cc62522ce1be21bd2f06e7c15cd234b5426 Mon Sep 17 00:00:00 2001
+From: Ax333l <main@axelen.xyz>
+Date: Thu, 17 Aug 2023 00:00:00 +0000
+Subject: [PATCH 1/6] Add CC0 license
+
+Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
+---
+ grub-core/kern/dl.c | 3 ++-
+ util/grub-module-verifierXX.c | 3 ++-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c
+index 0bf40caa6..4011e2d15 100644
+--- a/grub-core/kern/dl.c
++++ b/grub-core/kern/dl.c
+@@ -470,7 +470,8 @@ grub_dl_check_license (grub_dl_t mod, Elf_Ehdr *e)
+
+ if (grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3") == 0
+ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3+") == 0
+- || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0)
++ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0
++ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=CC0") == 0)
+ return GRUB_ERR_NONE;
+
+ return grub_error (GRUB_ERR_BAD_MODULE,
+diff --git a/util/grub-module-verifierXX.c b/util/grub-module-verifierXX.c
+index a42c20bd1..7157a30aa 100644
+--- a/util/grub-module-verifierXX.c
++++ b/util/grub-module-verifierXX.c
+@@ -236,7 +236,8 @@ check_license (const char * const filename,
+ Elf_Shdr *s = find_section (arch, e, ".module_license", module_size);
+ if (s && (strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3") == 0
+ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3+") == 0
+- || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0))
++ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0
++ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=CC0") == 0))
+ return;
+ grub_util_error ("%s: incompatible license", filename);
+ }
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch b/config/grub/nvme/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch
new file mode 100644
index 00000000..be875e67
--- /dev/null
+++ b/config/grub/nvme/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch
@@ -0,0 +1,39 @@
+From 9edaaffac91d593a439e44bac3b6f5558f5a8245 Mon Sep 17 00:00:00 2001
+From: Ax333l <main@axelen.xyz>
+Date: Thu, 17 Aug 2023 00:00:00 +0000
+Subject: [PATCH 2/6] Define GRUB_UINT32_MAX
+
+Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
+---
+ include/grub/types.h | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/include/grub/types.h b/include/grub/types.h
+index 0d96006fe..a13f3a60b 100644
+--- a/include/grub/types.h
++++ b/include/grub/types.h
+@@ -156,6 +156,7 @@ typedef grub_int32_t grub_ssize_t;
+ #define GRUB_SHRT_MAX 0x7fff
+ #define GRUB_SHRT_MIN (-GRUB_SHRT_MAX - 1)
+ #define GRUB_UINT_MAX 4294967295U
++#define GRUB_UINT32_MAX 4294967295U
+ #define GRUB_INT_MAX 0x7fffffff
+ #define GRUB_INT_MIN (-GRUB_INT_MAX - 1)
+ #define GRUB_INT32_MAX 2147483647
+@@ -177,6 +178,13 @@ typedef grub_int32_t grub_ssize_t;
+ #define GRUB_TYPE_U_MAX(type) ((unsigned long long)((typeof (type))(~0)))
+ #define GRUB_TYPE_U_MIN(type) 0ULL
+
++# define GRUB_UINT32_C(x) x ## U
++# if GRUB_ULONG_MAX >> 31 >> 31 >> 1 == 1
++# define GRUB_UINT64_C(x) x##UL
++# elif 1
++# define GRUB_UINT64_C(x) x##ULL
++# endif
++
+ typedef grub_uint64_t grub_properly_aligned_t;
+
+ #define GRUB_PROPERLY_ALIGNED_ARRAY(name, size) grub_properly_aligned_t name[((size) + sizeof (grub_properly_aligned_t) - 1) / sizeof (grub_properly_aligned_t)]
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0002-luks2/0005-Add-Argon2-algorithm.patch b/config/grub/nvme/patches/0002-luks2/0005-Add-Argon2-algorithm.patch
new file mode 100644
index 00000000..1c6b4f04
--- /dev/null
+++ b/config/grub/nvme/patches/0002-luks2/0005-Add-Argon2-algorithm.patch
@@ -0,0 +1,2611 @@
+From 5b63da5c4267933f573ca37ce39a073098c443ba Mon Sep 17 00:00:00 2001
+From: Ax333l <main@axelen.xyz>
+Date: Thu, 17 Aug 2023 00:00:00 +0000
+Subject: [PATCH 3/6] Add Argon2 algorithm
+
+Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
+---
+ docs/grub-dev.texi | 64 +++
+ grub-core/Makefile.core.def | 8 +
+ grub-core/lib/argon2/LICENSE | 314 +++++++++++
+ grub-core/lib/argon2/argon2.c | 232 ++++++++
+ grub-core/lib/argon2/argon2.h | 264 +++++++++
+ grub-core/lib/argon2/blake2/blake2-impl.h | 151 ++++++
+ grub-core/lib/argon2/blake2/blake2.h | 89 +++
+ grub-core/lib/argon2/blake2/blake2b.c | 388 ++++++++++++++
+ .../lib/argon2/blake2/blamka-round-ref.h | 56 ++
+ grub-core/lib/argon2/core.c | 506 ++++++++++++++++++
+ grub-core/lib/argon2/core.h | 228 ++++++++
+ grub-core/lib/argon2/ref.c | 190 +++++++
+ 12 files changed, 2490 insertions(+)
+ create mode 100644 grub-core/lib/argon2/LICENSE
+ create mode 100644 grub-core/lib/argon2/argon2.c
+ create mode 100644 grub-core/lib/argon2/argon2.h
+ create mode 100644 grub-core/lib/argon2/blake2/blake2-impl.h
+ create mode 100644 grub-core/lib/argon2/blake2/blake2.h
+ create mode 100644 grub-core/lib/argon2/blake2/blake2b.c
+ create mode 100644 grub-core/lib/argon2/blake2/blamka-round-ref.h
+ create mode 100644 grub-core/lib/argon2/core.c
+ create mode 100644 grub-core/lib/argon2/core.h
+ create mode 100644 grub-core/lib/argon2/ref.c
+
+diff --git a/docs/grub-dev.texi b/docs/grub-dev.texi
+index a695b02f0..313335a53 100644
+--- a/docs/grub-dev.texi
++++ b/docs/grub-dev.texi
+@@ -503,11 +503,75 @@ GRUB includes some code from other projects, and it is sometimes necessary
+ to update it.
+
+ @menu
++* Argon2::
+ * Gnulib::
+ * jsmn::
+ * minilzo::
+ @end menu
+
++@node Argon2
++@section Argon2
++
++Argon2 is a key derivation function used by LUKS2 in order to derive encryption
++keys from a user-provided password. GRUB imports the official reference
++implementation of Argon2 from @url{https://github.com/P-H-C/phc-winner-argon2}.
++In order to make the library usable for GRUB, we need to perform various
++conversions. This is mainly due to the fact that the imported code makes use of
++types and functions defined in the C standard library, which isn't available.
++Furthermore, using the POSIX wrapper library is not possible as the code needs
++to be part of the kernel.
++
++Updating the code can thus be performed like following:
++
++@example
++$ git clone https://github.com/P-H-C/phc-winner-argon2 argon2
++$ cp argon2/include/argon2.h argon2/src/@{argon2.c,core.c,core.h,ref.c@} \
++ grub-core/lib/argon2/
++$ cp argon2/src/blake2/@{blake2-impl.h,blake2.h,blake2b.c,blamka-round-ref.h@} \
++ grub-core/lib/argon2/blake2/
++$ sed -e 's/UINT32_C/GRUB_UINT32_C/g' \
++ -e 's/UINT64_C/GRUB_UINT64_C/g' \
++ -e 's/UINT32_MAX/GRUB_UINT32_MAX/g' \
++ -e 's/CHAR_BIT/GRUB_CHAR_BIT/g' \
++ -e 's/UINT_MAX/GRUB_UINT_MAX/g' \
++ -e 's/uintptr_t/grub_addr_t/g' \
++ -e 's/size_t/grub_size_t/g' \
++ -e 's/uint32_t/grub_uint32_t/g' \
++ -e 's/uint64_t/grub_uint64_t/g' \
++ -e 's/uint8_t/grub_uint8_t/g' \
++ -e 's/memset/grub_memset/g' \
++ -e 's/memcpy/grub_memcpy/g' \
++ -e 's/malloc/grub_malloc/g' \
++ -e 's/free/grub_free/g' \
++ -e 's/#elif _MSC_VER/#elif defined(_MSC_VER)/' \
++ grub-core/lib/argon2/@{*,blake2/*@}.@{c,h@} -i
++@end example
++
++Afterwards, you need to perform the following manual steps:
++
++@enumerate
++@item Remove all includes of standard library headers, "encoding.h" and
++ "thread.h".
++@item Add includes <grub/mm.h> and <grub/misc.h> to "argon2.h".
++@item Add include <grub/dl.h> and module license declaration to "argon2.c".
++@item Remove the following declarations and functions from "argon2.h" and
++ "argon2.c": argon2_type2string, argon2i_hash_encoded, argon2i_hash_raw,
++ argon2d_hash_encoded, argon2d_hash_raw, argon2id_hash_encoded,
++ argon2id_hash_raw, argon2_compare, argon2_verify, argon2i_verify,
++ argon2d_verify, argon2id_verify, argon2d_ctx, argon2i_ctx, argon2id_ctx,
++ argon2_verify_ctx, argon2d_verify_ctx, argon2i_verify_ctx,
++ argon2id_verify_ctx, argon2_encodedlen.
++@item Move the declaration of `clear_internal_memory()` in "blake2-impl.h" to
++ "blake2b.c".
++@item Remove code guarded by the ARGON2_NO_THREADS macro.
++@item Remove parameters `encoded` and `encodedlen` from `argon2_hash` and remove
++ the encoding block in that function.
++@item Remove parameter verifications in `validate_inputs()` for
++ ARGON2_MIN_PWD_LENGTH, ARGON2_MIN_SECRET, ARGON2_MIN_AD_LENGTH and
++ ARGON2_MAX_MEMORY to fix compiler warnings.
++@item Mark the function argon2_ctx as static.
++@end enumerate
++
+ @node Gnulib
+ @section Gnulib
+
+diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def
+index d2cf29584..4a06789e5 100644
+--- a/grub-core/Makefile.core.def
++++ b/grub-core/Makefile.core.def
+@@ -1215,6 +1215,14 @@ module = {
+ common = lib/json/json.c;
+ };
+
++module = {
++ name = argon2;
++ common = lib/argon2/argon2.c;
++ common = lib/argon2/core.c;
++ common = lib/argon2/ref.c;
++ common = lib/argon2/blake2/blake2b.c;
++};
++
+ module = {
+ name = afsplitter;
+ common = disk/AFSplitter.c;
+diff --git a/grub-core/lib/argon2/LICENSE b/grub-core/lib/argon2/LICENSE
+new file mode 100644
+index 000000000..97aae2925
+--- /dev/null
++++ b/grub-core/lib/argon2/LICENSE
+@@ -0,0 +1,314 @@
++Argon2 reference source code package - reference C implementations
++
++Copyright 2015
++Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++
++You may use this work under the terms of a Creative Commons CC0 1.0
++License/Waiver or the Apache Public License 2.0, at your option. The terms of
++these licenses can be found at:
++
++- CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++- Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++
++The terms of the licenses are reproduced below.
++
++--------------------------------------------------------------------------------
++
++Creative Commons Legal Code
++
++CC0 1.0 Universal
++
++ CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE
++ LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN
++ ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS
++ INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
++ REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS
++ PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM
++ THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED
++ HEREUNDER.
++
++Statement of Purpose
++
++The laws of most jurisdictions throughout the world automatically confer
++exclusive Copyright and Related Rights (defined below) upon the creator
++and subsequent owner(s) (each and all, an "owner") of an original work of
++authorship and/or a database (each, a "Work").
++
++Certain owners wish to permanently relinquish those rights to a Work for
++the purpose of contributing to a commons of creative, cultural and
++scientific works ("Commons") that the public can reliably and without fear
++of later claims of infringement build upon, modify, incorporate in other
++works, reuse and redistribute as freely as possible in any form whatsoever
++and for any purposes, including without limitation commercial purposes.
++These owners may contribute to the Commons to promote the ideal of a free
++culture and the further production of creative, cultural and scientific
++works, or to gain reputation or greater distribution for their Work in
++part through the use and efforts of others.
++
++For these and/or other purposes and motivations, and without any
++expectation of additional consideration or compensation, the person
++associating CC0 with a Work (the "Affirmer"), to the extent that he or she
++is an owner of Copyright and Related Rights in the Work, voluntarily
++elects to apply CC0 to the Work and publicly distribute the Work under its
++terms, with knowledge of his or her Copyright and Related Rights in the
++Work and the meaning and intended legal effect of CC0 on those rights.
++
++1. Copyright and Related Rights. A Work made available under CC0 may be
++protected by copyright and related or neighboring rights ("Copyright and
++Related Rights"). Copyright and Related Rights include, but are not
++limited to, the following:
++
++ i. the right to reproduce, adapt, distribute, perform, display,
++ communicate, and translate a Work;
++ ii. moral rights retained by the original author(s) and/or performer(s);
++iii. publicity and privacy rights pertaining to a person's image or
++ likeness depicted in a Work;
++ iv. rights protecting against unfair competition in regards to a Work,
++ subject to the limitations in paragraph 4(a), below;
++ v. rights protecting the extraction, dissemination, use and reuse of data
++ in a Work;
++ vi. database rights (such as those arising under Directive 96/9/EC of the
++ European Parliament and of the Council of 11 March 1996 on the legal
++ protection of databases, and under any national implementation
++ thereof, including any amended or successor version of such
++ directive); and
++vii. other similar, equivalent or corresponding rights throughout the
++ world based on applicable law or treaty, and any national
++ implementations thereof.
++
++2. Waiver. To the greatest extent permitted by, but not in contravention
++of, applicable law, Affirmer hereby overtly, fully, permanently,
++irrevocably and unconditionally waives, abandons, and surrenders all of
++Affirmer's Copyright and Related Rights and associated claims and causes
++of action, whether now known or unknown (including existing as well as
++future claims and causes of action), in the Work (i) in all territories
++worldwide, (ii) for the maximum duration provided by applicable law or
++treaty (including future time extensions), (iii) in any current or future
++medium and for any number of copies, and (iv) for any purpose whatsoever,
++including without limitation commercial, advertising or promotional
++purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each
++member of the public at large and to the detriment of Affirmer's heirs and
++successors, fully intending that such Waiver shall not be subject to
++revocation, rescission, cancellation, termination, or any other legal or
++equitable action to disrupt the quiet enjoyment of the Work by the public
++as contemplated by Affirmer's express Statement of Purpose.
++
++3. Public License Fallback. Should any part of the Waiver for any reason
++be judged legally invalid or ineffective under applicable law, then the
++Waiver shall be preserved to the maximum extent permitted taking into
++account Affirmer's express Statement of Purpose. In addition, to the
++extent the Waiver is so judged Affirmer hereby grants to each affected
++person a royalty-free, non transferable, non sublicensable, non exclusive,
++irrevocable and unconditional license to exercise Affirmer's Copyright and
++Related Rights in the Work (i) in all territories worldwide, (ii) for the
++maximum duration provided by applicable law or treaty (including future
++time extensions), (iii) in any current or future medium and for any number
++of copies, and (iv) for any purpose whatsoever, including without
++limitation commercial, advertising or promotional purposes (the
++"License"). The License shall be deemed effective as of the date CC0 was
++applied by Affirmer to the Work. Should any part of the License for any
++reason be judged legally invalid or ineffective under applicable law, such
++partial invalidity or ineffectiveness shall not invalidate the remainder
++of the License, and in such case Affirmer hereby affirms that he or she
++will not (i) exercise any of his or her remaining Copyright and Related
++Rights in the Work or (ii) assert any associated claims and causes of
++action with respect to the Work, in either case contrary to Affirmer's
++express Statement of Purpose.
++
++4. Limitations and Disclaimers.
++
++ a. No trademark or patent rights held by Affirmer are waived, abandoned,
++ surrendered, licensed or otherwise affected by this document.
++ b. Affirmer offers the Work as-is and makes no representations or
++ warranties of any kind concerning the Work, express, implied,
++ statutory or otherwise, including without limitation warranties of
++ title, merchantability, fitness for a particular purpose, non
++ infringement, or the absence of latent or other defects, accuracy, or
++ the present or absence of errors, whether or not discoverable, all to
++ the greatest extent permissible under applicable law.
++ c. Affirmer disclaims responsibility for clearing rights of other persons
++ that may apply to the Work or any use thereof, including without
++ limitation any person's Copyright and Related Rights in the Work.
++ Further, Affirmer disclaims responsibility for obtaining any necessary
++ consents, permissions or other rights required for any use of the
++ Work.
++ d. Affirmer understands and acknowledges that Creative Commons is not a
++ party to this document and has no duty or obligation with respect to
++ this CC0 or use of the Work.
++
++--------------------------------------------------------------------------------
++
++ Apache License
++ Version 2.0, January 2004
++ http://www.apache.org/licenses/
++
++ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
++
++ 1. Definitions.
++
++ "License" shall mean the terms and conditions for use, reproduction,
++ and distribution as defined by Sections 1 through 9 of this document.
++
++ "Licensor" shall mean the copyright owner or entity authorized by
++ the copyright owner that is granting the License.
++
++ "Legal Entity" shall mean the union of the acting entity and all
++ other entities that control, are controlled by, or are under common
++ control with that entity. For the purposes of this definition,
++ "control" means (i) the power, direct or indirect, to cause the
++ direction or management of such entity, whether by contract or
++ otherwise, or (ii) ownership of fifty percent (50%) or more of the
++ outstanding shares, or (iii) beneficial ownership of such entity.
++
++ "You" (or "Your") shall mean an individual or Legal Entity
++ exercising permissions granted by this License.
++
++ "Source" form shall mean the preferred form for making modifications,
++ including but not limited to software source code, documentation
++ source, and configuration files.
++
++ "Object" form shall mean any form resulting from mechanical
++ transformation or translation of a Source form, including but
++ not limited to compiled object code, generated documentation,
++ and conversions to other media types.
++
++ "Work" shall mean the work of authorship, whether in Source or
++ Object form, made available under the License, as indicated by a
++ copyright notice that is included in or attached to the work
++ (an example is provided in the Appendix below).
++
++ "Derivative Works" shall mean any work, whether in Source or Object
++ form, that is based on (or derived from) the Work and for which the
++ editorial revisions, annotations, elaborations, or other modifications
++ represent, as a whole, an original work of authorship. For the purposes
++ of this License, Derivative Works shall not include works that remain
++ separable from, or merely link (or bind by name) to the interfaces of,
++ the Work and Derivative Works thereof.
++
++ "Contribution" shall mean any work of authorship, including
++ the original version of the Work and any modifications or additions
++ to that Work or Derivative Works thereof, that is intentionally
++ submitted to Licensor for inclusion in the Work by the copyright owner
++ or by an individual or Legal Entity authorized to submit on behalf of
++ the copyright owner. For the purposes of this definition, "submitted"
++ means any form of electronic, verbal, or written communication sent
++ to the Licensor or its representatives, including but not limited to
++ communication on electronic mailing lists, source code control systems,
++ and issue tracking systems that are managed by, or on behalf of, the
++ Licensor for the purpose of discussing and improving the Work, but
++ excluding communication that is conspicuously marked or otherwise
++ designated in writing by the copyright owner as "Not a Contribution."
++
++ "Contributor" shall mean Licensor and any individual or Legal Entity
++ on behalf of whom a Contribution has been received by Licensor and
++ subsequently incorporated within the Work.
++
++ 2. Grant of Copyright License. Subject to the terms and conditions of
++ this License, each Contributor hereby grants to You a perpetual,
++ worldwide, non-exclusive, no-charge, royalty-free, irrevocable
++ copyright license to reproduce, prepare Derivative Works of,
++ publicly display, publicly perform, sublicense, and distribute the
++ Work and such Derivative Works in Source or Object form.
++
++ 3. Grant of Patent License. Subject to the terms and conditions of
++ this License, each Contributor hereby grants to You a perpetual,
++ worldwide, non-exclusive, no-charge, royalty-free, irrevocable
++ (except as stated in this section) patent license to make, have made,
++ use, offer to sell, sell, import, and otherwise transfer the Work,
++ where such license applies only to those patent claims licensable
++ by such Contributor that are necessarily infringed by their
++ Contribution(s) alone or by combination of their Contribution(s)
++ with the Work to which such Contribution(s) was submitted. If You
++ institute patent litigation against any entity (including a
++ cross-claim or counterclaim in a lawsuit) alleging that the Work
++ or a Contribution incorporated within the Work constitutes direct
++ or contributory patent infringement, then any patent licenses
++ granted to You under this License for that Work shall terminate
++ as of the date such litigation is filed.
++
++ 4. Redistribution. You may reproduce and distribute copies of the
++ Work or Derivative Works thereof in any medium, with or without
++ modifications, and in Source or Object form, provided that You
++ meet the following conditions:
++
++ (a) You must give any other recipients of the Work or
++ Derivative Works a copy of this License; and
++
++ (b) You must cause any modified files to carry prominent notices
++ stating that You changed the files; and
++
++ (c) You must retain, in the Source form of any Derivative Works
++ that You distribute, all copyright, patent, trademark, and
++ attribution notices from the Source form of the Work,
++ excluding those notices that do not pertain to any part of
++ the Derivative Works; and
++
++ (d) If the Work includes a "NOTICE" text file as part of its
++ distribution, then any Derivative Works that You distribute must
++ include a readable copy of the attribution notices contained
++ within such NOTICE file, excluding those notices that do not
++ pertain to any part of the Derivative Works, in at least one
++ of the following places: within a NOTICE text file distributed
++ as part of the Derivative Works; within the Source form or
++ documentation, if provided along with the Derivative Works; or,
++ within a display generated by the Derivative Works, if and
++ wherever such third-party notices normally appear. The contents
++ of the NOTICE file are for informational purposes only and
++ do not modify the License. You may add Your own attribution
++ notices within Derivative Works that You distribute, alongside
++ or as an addendum to the NOTICE text from the Work, provided
++ that such additional attribution notices cannot be construed
++ as modifying the License.
++
++ You may add Your own copyright statement to Your modifications and
++ may provide additional or different license terms and conditions
++ for use, reproduction, or distribution of Your modifications, or
++ for any such Derivative Works as a whole, provided Your use,
++ reproduction, and distribution of the Work otherwise complies with
++ the conditions stated in this License.
++
++ 5. Submission of Contributions. Unless You explicitly state otherwise,
++ any Contribution intentionally submitted for inclusion in the Work
++ by You to the Licensor shall be under the terms and conditions of
++ this License, without any additional terms or conditions.
++ Notwithstanding the above, nothing herein shall supersede or modify
++ the terms of any separate license agreement you may have executed
++ with Licensor regarding such Contributions.
++
++ 6. Trademarks. This License does not grant permission to use the trade
++ names, trademarks, service marks, or product names of the Licensor,
++ except as required for reasonable and customary use in describing the
++ origin of the Work and reproducing the content of the NOTICE file.
++
++ 7. Disclaimer of Warranty. Unless required by applicable law or
++ agreed to in writing, Licensor provides the Work (and each
++ Contributor provides its Contributions) on an "AS IS" BASIS,
++ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
++ implied, including, without limitation, any warranties or conditions
++ of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
++ PARTICULAR PURPOSE. You are solely responsible for determining the
++ appropriateness of using or redistributing the Work and assume any
++ risks associated with Your exercise of permissions under this License.
++
++ 8. Limitation of Liability. In no event and under no legal theory,
++ whether in tort (including negligence), contract, or otherwise,
++ unless required by applicable law (such as deliberate and grossly
++ negligent acts) or agreed to in writing, shall any Contributor be
++ liable to You for damages, including any direct, indirect, special,
++ incidental, or consequential damages of any character arising as a
++ result of this License or out of the use or inability to use the
++ Work (including but not limited to damages for loss of goodwill,
++ work stoppage, computer failure or malfunction, or any and all
++ other commercial damages or losses), even if such Contributor
++ has been advised of the possibility of such damages.
++
++ 9. Accepting Warranty or Additional Liability. While redistributing
++ the Work or Derivative Works thereof, You may choose to offer,
++ and charge a fee for, acceptance of support, warranty, indemnity,
++ or other liability obligations and/or rights consistent with this
++ License. However, in accepting such obligations, You may act only
++ on Your own behalf and on Your sole responsibility, not on behalf
++ of any other Contributor, and only if You agree to indemnify,
++ defend, and hold each Contributor harmless for any liability
++ incurred by, or claims asserted against, such Contributor by reason
++ of your accepting any such warranty or additional liability.
+diff --git a/grub-core/lib/argon2/argon2.c b/grub-core/lib/argon2/argon2.c
+new file mode 100644
+index 000000000..49532fe80
+--- /dev/null
++++ b/grub-core/lib/argon2/argon2.c
+@@ -0,0 +1,232 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#include <grub/dl.h>
++
++#include "argon2.h"
++#include "core.h"
++
++GRUB_MOD_LICENSE ("CC0");
++
++static int argon2_ctx(argon2_context *context, argon2_type type) {
++ /* 1. Validate all inputs */
++ int result = validate_inputs(context);
++ grub_uint32_t memory_blocks, segment_length;
++ argon2_instance_t instance;
++
++ if (ARGON2_OK != result) {
++ return result;
++ }
++
++ if (Argon2_d != type && Argon2_i != type && Argon2_id != type) {
++ return ARGON2_INCORRECT_TYPE;
++ }
++
++ /* 2. Align memory size */
++ /* Minimum memory_blocks = 8L blocks, where L is the number of lanes */
++ memory_blocks = context->m_cost;
++
++ if (memory_blocks < 2 * ARGON2_SYNC_POINTS * context->lanes) {
++ memory_blocks = 2 * ARGON2_SYNC_POINTS * context->lanes;
++ }
++
++ segment_length = memory_blocks / (context->lanes * ARGON2_SYNC_POINTS);
++ /* Ensure that all segments have equal length */
++ memory_blocks = segment_length * (context->lanes * ARGON2_SYNC_POINTS);
++
++ instance.version = context->version;
++ instance.memory = NULL;
++ instance.passes = context->t_cost;
++ instance.memory_blocks = memory_blocks;
++ instance.segment_length = segment_length;
++ instance.lane_length = segment_length * ARGON2_SYNC_POINTS;
++ instance.lanes = context->lanes;
++ instance.threads = context->threads;
++ instance.type = type;
++
++ if (instance.threads > instance.lanes) {
++ instance.threads = instance.lanes;
++ }
++
++ /* 3. Initialization: Hashing inputs, allocating memory, filling first
++ * blocks
++ */
++ result = initialize(&instance, context);
++
++ if (ARGON2_OK != result) {
++ return result;
++ }
++
++ /* 4. Filling memory */
++ result = fill_memory_blocks(&instance);
++
++ if (ARGON2_OK != result) {
++ return result;
++ }
++ /* 5. Finalization */
++ finalize(context, &instance);
++
++ return ARGON2_OK;
++}
++
++int argon2_hash(const grub_uint32_t t_cost, const grub_uint32_t m_cost,
++ const grub_uint32_t parallelism, const void *pwd,
++ const grub_size_t pwdlen, const void *salt, const grub_size_t saltlen,
++ void *hash, const grub_size_t hashlen, argon2_type type,
++ const grub_uint32_t version){
++
++ argon2_context context;
++ int result;
++ grub_uint8_t *out;
++
++ if (pwdlen > ARGON2_MAX_PWD_LENGTH) {
++ return ARGON2_PWD_TOO_LONG;
++ }
++
++ if (saltlen > ARGON2_MAX_SALT_LENGTH) {
++ return ARGON2_SALT_TOO_LONG;
++ }
++
++ if (hashlen > ARGON2_MAX_OUTLEN) {
++ return ARGON2_OUTPUT_TOO_LONG;
++ }
++
++ if (hashlen < ARGON2_MIN_OUTLEN) {
++ return ARGON2_OUTPUT_TOO_SHORT;
++ }
++
++ out = grub_malloc(hashlen);
++ if (!out) {
++ return ARGON2_MEMORY_ALLOCATION_ERROR;
++ }
++
++ context.out = (grub_uint8_t *)out;
++ context.outlen = (grub_uint32_t)hashlen;
++ context.pwd = CONST_CAST(grub_uint8_t *)pwd;
++ context.pwdlen = (grub_uint32_t)pwdlen;
++ context.salt = CONST_CAST(grub_uint8_t *)salt;
++ context.saltlen = (grub_uint32_t)saltlen;
++ context.secret = NULL;
++ context.secretlen = 0;
++ context.ad = NULL;
++ context.adlen = 0;
++ context.t_cost = t_cost;
++ context.m_cost = m_cost;
++ context.lanes = parallelism;
++ context.threads = parallelism;
++ context.allocate_cbk = NULL;
++ context.grub_free_cbk = NULL;
++ context.flags = ARGON2_DEFAULT_FLAGS;
++ context.version = version;
++
++ result = argon2_ctx(&context, type);
++
++ if (result != ARGON2_OK) {
++ clear_internal_memory(out, hashlen);
++ grub_free(out);
++ return result;
++ }
++
++ /* if raw hash requested, write it */
++ if (hash) {
++ grub_memcpy(hash, out, hashlen);
++ }
++
++ clear_internal_memory(out, hashlen);
++ grub_free(out);
++
++ return ARGON2_OK;
++}
++
++const char *argon2_error_message(int error_code) {
++ switch (error_code) {
++ case ARGON2_OK:
++ return "OK";
++ case ARGON2_OUTPUT_PTR_NULL:
++ return "Output pointer is NULL";
++ case ARGON2_OUTPUT_TOO_SHORT:
++ return "Output is too short";
++ case ARGON2_OUTPUT_TOO_LONG:
++ return "Output is too long";
++ case ARGON2_PWD_TOO_SHORT:
++ return "Password is too short";
++ case ARGON2_PWD_TOO_LONG:
++ return "Password is too long";
++ case ARGON2_SALT_TOO_SHORT:
++ return "Salt is too short";
++ case ARGON2_SALT_TOO_LONG:
++ return "Salt is too long";
++ case ARGON2_AD_TOO_SHORT:
++ return "Associated data is too short";
++ case ARGON2_AD_TOO_LONG:
++ return "Associated data is too long";
++ case ARGON2_SECRET_TOO_SHORT:
++ return "Secret is too short";
++ case ARGON2_SECRET_TOO_LONG:
++ return "Secret is too long";
++ case ARGON2_TIME_TOO_SMALL:
++ return "Time cost is too small";
++ case ARGON2_TIME_TOO_LARGE:
++ return "Time cost is too large";
++ case ARGON2_MEMORY_TOO_LITTLE:
++ return "Memory cost is too small";
++ case ARGON2_MEMORY_TOO_MUCH:
++ return "Memory cost is too large";
++ case ARGON2_LANES_TOO_FEW:
++ return "Too few lanes";
++ case ARGON2_LANES_TOO_MANY:
++ return "Too many lanes";
++ case ARGON2_PWD_PTR_MISMATCH:
++ return "Password pointer is NULL, but password length is not 0";
++ case ARGON2_SALT_PTR_MISMATCH:
++ return "Salt pointer is NULL, but salt length is not 0";
++ case ARGON2_SECRET_PTR_MISMATCH:
++ return "Secret pointer is NULL, but secret length is not 0";
++ case ARGON2_AD_PTR_MISMATCH:
++ return "Associated data pointer is NULL, but ad length is not 0";
++ case ARGON2_MEMORY_ALLOCATION_ERROR:
++ return "Memory allocation error";
++ case ARGON2_FREE_MEMORY_CBK_NULL:
++ return "The grub_free memory callback is NULL";
++ case ARGON2_ALLOCATE_MEMORY_CBK_NULL:
++ return "The allocate memory callback is NULL";
++ case ARGON2_INCORRECT_PARAMETER:
++ return "Argon2_Context context is NULL";
++ case ARGON2_INCORRECT_TYPE:
++ return "There is no such version of Argon2";
++ case ARGON2_OUT_PTR_MISMATCH:
++ return "Output pointer mismatch";
++ case ARGON2_THREADS_TOO_FEW:
++ return "Not enough threads";
++ case ARGON2_THREADS_TOO_MANY:
++ return "Too many threads";
++ case ARGON2_MISSING_ARGS:
++ return "Missing arguments";
++ case ARGON2_ENCODING_FAIL:
++ return "Encoding failed";
++ case ARGON2_DECODING_FAIL:
++ return "Decoding failed";
++ case ARGON2_THREAD_FAIL:
++ return "Threading failure";
++ case ARGON2_DECODING_LENGTH_FAIL:
++ return "Some of encoded parameters are too long or too short";
++ case ARGON2_VERIFY_MISMATCH:
++ return "The password does not match the supplied hash";
++ default:
++ return "Unknown error code";
++ }
++}
+diff --git a/grub-core/lib/argon2/argon2.h b/grub-core/lib/argon2/argon2.h
+new file mode 100644
+index 000000000..129f7efbd
+--- /dev/null
++++ b/grub-core/lib/argon2/argon2.h
+@@ -0,0 +1,264 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#ifndef ARGON2_H
++#define ARGON2_H
++
++#include <grub/misc.h>
++#include <grub/mm.h>
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++/* Symbols visibility control */
++#ifdef A2_VISCTL
++#define ARGON2_PUBLIC __attribute__((visibility("default")))
++#define ARGON2_LOCAL __attribute__ ((visibility ("hidden")))
++#elif defined(_MSC_VER)
++#define ARGON2_PUBLIC __declspec(dllexport)
++#define ARGON2_LOCAL
++#else
++#define ARGON2_PUBLIC
++#define ARGON2_LOCAL
++#endif
++
++/*
++ * Argon2 input parameter restrictions
++ */
++
++/* Minimum and maximum number of lanes (degree of parallelism) */
++#define ARGON2_MIN_LANES GRUB_UINT32_C(1)
++#define ARGON2_MAX_LANES GRUB_UINT32_C(0xFFFFFF)
++
++/* Minimum and maximum number of threads */
++#define ARGON2_MIN_THREADS GRUB_UINT32_C(1)
++#define ARGON2_MAX_THREADS GRUB_UINT32_C(0xFFFFFF)
++
++/* Number of synchronization points between lanes per pass */
++#define ARGON2_SYNC_POINTS GRUB_UINT32_C(4)
++
++/* Minimum and maximum digest size in bytes */
++#define ARGON2_MIN_OUTLEN GRUB_UINT32_C(4)
++#define ARGON2_MAX_OUTLEN GRUB_UINT32_C(0xFFFFFFFF)
++
++/* Minimum and maximum number of memory blocks (each of BLOCK_SIZE bytes) */
++#define ARGON2_MIN_MEMORY (2 * ARGON2_SYNC_POINTS) /* 2 blocks per slice */
++
++#define ARGON2_MIN(a, b) ((a) < (b) ? (a) : (b))
++/* Max memory size is addressing-space/2, topping at 2^32 blocks (4 TB) */
++#define ARGON2_MAX_MEMORY_BITS \
++ ARGON2_MIN(GRUB_UINT32_C(32), (sizeof(void *) * GRUB_CHAR_BIT - 10 - 1))
++#define ARGON2_MAX_MEMORY \
++ ARGON2_MIN(GRUB_UINT32_C(0xFFFFFFFF), GRUB_UINT64_C(1) << ARGON2_MAX_MEMORY_BITS)
++
++/* Minimum and maximum number of passes */
++#define ARGON2_MIN_TIME GRUB_UINT32_C(1)
++#define ARGON2_MAX_TIME GRUB_UINT32_C(0xFFFFFFFF)
++
++/* Minimum and maximum password length in bytes */
++#define ARGON2_MIN_PWD_LENGTH GRUB_UINT32_C(0)
++#define ARGON2_MAX_PWD_LENGTH GRUB_UINT32_C(0xFFFFFFFF)
++
++/* Minimum and maximum associated data length in bytes */
++#define ARGON2_MIN_AD_LENGTH GRUB_UINT32_C(0)
++#define ARGON2_MAX_AD_LENGTH GRUB_UINT32_C(0xFFFFFFFF)
++
++/* Minimum and maximum salt length in bytes */
++#define ARGON2_MIN_SALT_LENGTH GRUB_UINT32_C(8)
++#define ARGON2_MAX_SALT_LENGTH GRUB_UINT32_C(0xFFFFFFFF)
++
++/* Minimum and maximum key length in bytes */
++#define ARGON2_MIN_SECRET GRUB_UINT32_C(0)
++#define ARGON2_MAX_SECRET GRUB_UINT32_C(0xFFFFFFFF)
++
++/* Flags to determine which fields are securely wiped (default = no wipe). */
++#define ARGON2_DEFAULT_FLAGS GRUB_UINT32_C(0)
++#define ARGON2_FLAG_CLEAR_PASSWORD (GRUB_UINT32_C(1) << 0)
++#define ARGON2_FLAG_CLEAR_SECRET (GRUB_UINT32_C(1) << 1)
++
++/* Global flag to determine if we are wiping internal memory buffers. This flag
++ * is defined in core.c and defaults to 1 (wipe internal memory). */
++extern int FLAG_clear_internal_memory;
++
++/* Error codes */
++typedef enum Argon2_ErrorCodes {
++ ARGON2_OK = 0,
++
++ ARGON2_OUTPUT_PTR_NULL = -1,
++
++ ARGON2_OUTPUT_TOO_SHORT = -2,
++ ARGON2_OUTPUT_TOO_LONG = -3,
++
++ ARGON2_PWD_TOO_SHORT = -4,
++ ARGON2_PWD_TOO_LONG = -5,
++
++ ARGON2_SALT_TOO_SHORT = -6,
++ ARGON2_SALT_TOO_LONG = -7,
++
++ ARGON2_AD_TOO_SHORT = -8,
++ ARGON2_AD_TOO_LONG = -9,
++
++ ARGON2_SECRET_TOO_SHORT = -10,
++ ARGON2_SECRET_TOO_LONG = -11,
++
++ ARGON2_TIME_TOO_SMALL = -12,
++ ARGON2_TIME_TOO_LARGE = -13,
++
++ ARGON2_MEMORY_TOO_LITTLE = -14,
++ ARGON2_MEMORY_TOO_MUCH = -15,
++
++ ARGON2_LANES_TOO_FEW = -16,
++ ARGON2_LANES_TOO_MANY = -17,
++
++ ARGON2_PWD_PTR_MISMATCH = -18, /* NULL ptr with non-zero length */
++ ARGON2_SALT_PTR_MISMATCH = -19, /* NULL ptr with non-zero length */
++ ARGON2_SECRET_PTR_MISMATCH = -20, /* NULL ptr with non-zero length */
++ ARGON2_AD_PTR_MISMATCH = -21, /* NULL ptr with non-zero length */
++
++ ARGON2_MEMORY_ALLOCATION_ERROR = -22,
++
++ ARGON2_FREE_MEMORY_CBK_NULL = -23,
++ ARGON2_ALLOCATE_MEMORY_CBK_NULL = -24,
++
++ ARGON2_INCORRECT_PARAMETER = -25,
++ ARGON2_INCORRECT_TYPE = -26,
++
++ ARGON2_OUT_PTR_MISMATCH = -27,
++
++ ARGON2_THREADS_TOO_FEW = -28,
++ ARGON2_THREADS_TOO_MANY = -29,
++
++ ARGON2_MISSING_ARGS = -30,
++
++ ARGON2_ENCODING_FAIL = -31,
++
++ ARGON2_DECODING_FAIL = -32,
++
++ ARGON2_THREAD_FAIL = -33,
++
++ ARGON2_DECODING_LENGTH_FAIL = -34,
++
++ ARGON2_VERIFY_MISMATCH = -35
++} argon2_error_codes;
++
++/* Memory allocator types --- for external allocation */
++typedef int (*allocate_fptr)(grub_uint8_t **memory, grub_size_t bytes_to_allocate);
++typedef void (*deallocate_fptr)(grub_uint8_t *memory, grub_size_t bytes_to_allocate);
++
++/* Argon2 external data structures */
++
++/*
++ *****
++ * Context: structure to hold Argon2 inputs:
++ * output array and its length,
++ * password and its length,
++ * salt and its length,
++ * secret and its length,
++ * associated data and its length,
++ * number of passes, amount of used memory (in KBytes, can be rounded up a bit)
++ * number of parallel threads that will be run.
++ * All the parameters above affect the output hash value.
++ * Additionally, two function pointers can be provided to allocate and
++ * deallocate the memory (if NULL, memory will be allocated internally).
++ * Also, three flags indicate whether to erase password, secret as soon as they
++ * are pre-hashed (and thus not needed anymore), and the entire memory
++ *****
++ * Simplest situation: you have output array out[8], password is stored in
++ * pwd[32], salt is stored in salt[16], you do not have keys nor associated
++ * data. You need to spend 1 GB of RAM and you run 5 passes of Argon2d with
++ * 4 parallel lanes.
++ * You want to erase the password, but you're OK with last pass not being
++ * erased. You want to use the default memory allocator.
++ * Then you initialize:
++ Argon2_Context(out,8,pwd,32,salt,16,NULL,0,NULL,0,5,1<<20,4,4,NULL,NULL,true,false,false,false)
++ */
++typedef struct Argon2_Context {
++ grub_uint8_t *out; /* output array */
++ grub_uint32_t outlen; /* digest length */
++
++ grub_uint8_t *pwd; /* password array */
++ grub_uint32_t pwdlen; /* password length */
++
++ grub_uint8_t *salt; /* salt array */
++ grub_uint32_t saltlen; /* salt length */
++
++ grub_uint8_t *secret; /* key array */
++ grub_uint32_t secretlen; /* key length */
++
++ grub_uint8_t *ad; /* associated data array */
++ grub_uint32_t adlen; /* associated data length */
++
++ grub_uint32_t t_cost; /* number of passes */
++ grub_uint32_t m_cost; /* amount of memory requested (KB) */
++ grub_uint32_t lanes; /* number of lanes */
++ grub_uint32_t threads; /* maximum number of threads */
++
++ grub_uint32_t version; /* version number */
++
++ allocate_fptr allocate_cbk; /* pointer to memory allocator */
++ deallocate_fptr grub_free_cbk; /* pointer to memory deallocator */
++
++ grub_uint32_t flags; /* array of bool options */
++} argon2_context;
++
++/* Argon2 primitive type */
++typedef enum Argon2_type {
++ Argon2_d = 0,
++ Argon2_i = 1,
++ Argon2_id = 2
++} argon2_type;
++
++/* Version of the algorithm */
++typedef enum Argon2_version {
++ ARGON2_VERSION_10 = 0x10,
++ ARGON2_VERSION_13 = 0x13,
++ ARGON2_VERSION_NUMBER = ARGON2_VERSION_13
++} argon2_version;
++
++/**
++ * Hashes a password with Argon2, producing a raw hash at @hash
++ * @param t_cost Number of iterations
++ * @param m_cost Sets memory usage to m_cost kibibytes
++ * @param parallelism Number of threads and compute lanes
++ * @param pwd Pointer to password
++ * @param pwdlen Password size in bytes
++ * @param salt Pointer to salt
++ * @param saltlen Salt size in bytes
++ * @param hash Buffer where to write the raw hash - updated by the function
++ * @param hashlen Desired length of the hash in bytes
++ * @pre Different parallelism levels will give different results
++ * @pre Returns ARGON2_OK if successful
++ */
++ARGON2_PUBLIC int argon2_hash(const grub_uint32_t t_cost, const grub_uint32_t m_cost,
++ const grub_uint32_t parallelism, const void *pwd,
++ const grub_size_t pwdlen, const void *salt,
++ const grub_size_t saltlen, void *hash,
++ const grub_size_t hashlen, argon2_type type,
++ const grub_uint32_t version);
++
++/**
++ * Get the associated error message for given error code
++ * @return The error message associated with the given error code
++ */
++ARGON2_PUBLIC const char *argon2_error_message(int error_code);
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif
+diff --git a/grub-core/lib/argon2/blake2/blake2-impl.h b/grub-core/lib/argon2/blake2/blake2-impl.h
+new file mode 100644
+index 000000000..3a795680b
+--- /dev/null
++++ b/grub-core/lib/argon2/blake2/blake2-impl.h
+@@ -0,0 +1,151 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#ifndef PORTABLE_BLAKE2_IMPL_H
++#define PORTABLE_BLAKE2_IMPL_H
++
++#if defined(_MSC_VER)
++#define BLAKE2_INLINE __inline
++#elif defined(__GNUC__) || defined(__clang__)
++#define BLAKE2_INLINE __inline__
++#else
++#define BLAKE2_INLINE
++#endif
++
++/* Argon2 Team - Begin Code */
++/*
++ Not an exhaustive list, but should cover the majority of modern platforms
++ Additionally, the code will always be correct---this is only a performance
++ tweak.
++*/
++#if (defined(__BYTE_ORDER__) && \
++ (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)) || \
++ defined(__LITTLE_ENDIAN__) || defined(__ARMEL__) || defined(__MIPSEL__) || \
++ defined(__AARCH64EL__) || defined(__amd64__) || defined(__i386__) || \
++ defined(_M_IX86) || defined(_M_X64) || defined(_M_AMD64) || \
++ defined(_M_ARM)
++#define NATIVE_LITTLE_ENDIAN
++#endif
++/* Argon2 Team - End Code */
++
++static BLAKE2_INLINE grub_uint32_t load32(const void *src) {
++#if defined(NATIVE_LITTLE_ENDIAN)
++ grub_uint32_t w;
++ grub_memcpy(&w, src, sizeof w);
++ return w;
++#else
++ const grub_uint8_t *p = (const grub_uint8_t *)src;
++ grub_uint32_t w = *p++;
++ w |= (grub_uint32_t)(*p++) << 8;
++ w |= (grub_uint32_t)(*p++) << 16;
++ w |= (grub_uint32_t)(*p++) << 24;
++ return w;
++#endif
++}
++
++static BLAKE2_INLINE grub_uint64_t load64(const void *src) {
++#if defined(NATIVE_LITTLE_ENDIAN)
++ grub_uint64_t w;
++ grub_memcpy(&w, src, sizeof w);
++ return w;
++#else
++ const grub_uint8_t *p = (const grub_uint8_t *)src;
++ grub_uint64_t w = *p++;
++ w |= (grub_uint64_t)(*p++) << 8;
++ w |= (grub_uint64_t)(*p++) << 16;
++ w |= (grub_uint64_t)(*p++) << 24;
++ w |= (grub_uint64_t)(*p++) << 32;
++ w |= (grub_uint64_t)(*p++) << 40;
++ w |= (grub_uint64_t)(*p++) << 48;
++ w |= (grub_uint64_t)(*p++) << 56;
++ return w;
++#endif
++}
++
++static BLAKE2_INLINE void store32(void *dst, grub_uint32_t w) {
++#if defined(NATIVE_LITTLE_ENDIAN)
++ grub_memcpy(dst, &w, sizeof w);
++#else
++ grub_uint8_t *p = (grub_uint8_t *)dst;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++#endif
++}
++
++static BLAKE2_INLINE void store64(void *dst, grub_uint64_t w) {
++#if defined(NATIVE_LITTLE_ENDIAN)
++ grub_memcpy(dst, &w, sizeof w);
++#else
++ grub_uint8_t *p = (grub_uint8_t *)dst;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++#endif
++}
++
++static BLAKE2_INLINE grub_uint64_t load48(const void *src) {
++ const grub_uint8_t *p = (const grub_uint8_t *)src;
++ grub_uint64_t w = *p++;
++ w |= (grub_uint64_t)(*p++) << 8;
++ w |= (grub_uint64_t)(*p++) << 16;
++ w |= (grub_uint64_t)(*p++) << 24;
++ w |= (grub_uint64_t)(*p++) << 32;
++ w |= (grub_uint64_t)(*p++) << 40;
++ return w;
++}
++
++static BLAKE2_INLINE void store48(void *dst, grub_uint64_t w) {
++ grub_uint8_t *p = (grub_uint8_t *)dst;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++ w >>= 8;
++ *p++ = (grub_uint8_t)w;
++}
++
++static BLAKE2_INLINE grub_uint32_t rotr32(const grub_uint32_t w, const unsigned c) {
++ return (w >> c) | (w << (32 - c));
++}
++
++static BLAKE2_INLINE grub_uint64_t rotr64(const grub_uint64_t w, const unsigned c) {
++ return (w >> c) | (w << (64 - c));
++}
++
++#endif
+diff --git a/grub-core/lib/argon2/blake2/blake2.h b/grub-core/lib/argon2/blake2/blake2.h
+new file mode 100644
+index 000000000..4e8efeb22
+--- /dev/null
++++ b/grub-core/lib/argon2/blake2/blake2.h
+@@ -0,0 +1,89 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#ifndef PORTABLE_BLAKE2_H
++#define PORTABLE_BLAKE2_H
++
++#include "../argon2.h"
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++enum blake2b_constant {
++ BLAKE2B_BLOCKBYTES = 128,
++ BLAKE2B_OUTBYTES = 64,
++ BLAKE2B_KEYBYTES = 64,
++ BLAKE2B_SALTBYTES = 16,
++ BLAKE2B_PERSONALBYTES = 16
++};
++
++#pragma pack(push, 1)
++typedef struct __blake2b_param {
++ grub_uint8_t digest_length; /* 1 */
++ grub_uint8_t key_length; /* 2 */
++ grub_uint8_t fanout; /* 3 */
++ grub_uint8_t depth; /* 4 */
++ grub_uint32_t leaf_length; /* 8 */
++ grub_uint64_t node_offset; /* 16 */
++ grub_uint8_t node_depth; /* 17 */
++ grub_uint8_t inner_length; /* 18 */
++ grub_uint8_t reserved[14]; /* 32 */
++ grub_uint8_t salt[BLAKE2B_SALTBYTES]; /* 48 */
++ grub_uint8_t personal[BLAKE2B_PERSONALBYTES]; /* 64 */
++} blake2b_param;
++#pragma pack(pop)
++
++typedef struct __blake2b_state {
++ grub_uint64_t h[8];
++ grub_uint64_t t[2];
++ grub_uint64_t f[2];
++ grub_uint8_t buf[BLAKE2B_BLOCKBYTES];
++ unsigned buflen;
++ unsigned outlen;
++ grub_uint8_t last_node;
++} blake2b_state;
++
++/* Ensure param structs have not been wrongly padded */
++/* Poor man's static_assert */
++enum {
++ blake2_size_check_0 = 1 / !!(GRUB_CHAR_BIT == 8),
++ blake2_size_check_2 =
++ 1 / !!(sizeof(blake2b_param) == sizeof(grub_uint64_t) * GRUB_CHAR_BIT)
++};
++
++/* Streaming API */
++ARGON2_LOCAL int blake2b_init(blake2b_state *S, grub_size_t outlen);
++ARGON2_LOCAL int blake2b_init_key(blake2b_state *S, grub_size_t outlen, const void *key,
++ grub_size_t keylen);
++ARGON2_LOCAL int blake2b_init_param(blake2b_state *S, const blake2b_param *P);
++ARGON2_LOCAL int blake2b_update(blake2b_state *S, const void *in, grub_size_t inlen);
++ARGON2_LOCAL int blake2b_final(blake2b_state *S, void *out, grub_size_t outlen);
++
++/* Simple API */
++ARGON2_LOCAL int blake2b(void *out, grub_size_t outlen, const void *in, grub_size_t inlen,
++ const void *key, grub_size_t keylen);
++
++/* Argon2 Team - Begin Code */
++ARGON2_LOCAL int blake2b_long(void *out, grub_size_t outlen, const void *in, grub_size_t inlen);
++/* Argon2 Team - End Code */
++
++#if defined(__cplusplus)
++}
++#endif
++
++#endif
+diff --git a/grub-core/lib/argon2/blake2/blake2b.c b/grub-core/lib/argon2/blake2/blake2b.c
+new file mode 100644
+index 000000000..53abd7bef
+--- /dev/null
++++ b/grub-core/lib/argon2/blake2/blake2b.c
+@@ -0,0 +1,388 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#include "blake2.h"
++#include "blake2-impl.h"
++
++static const grub_uint64_t blake2b_IV[8] = {
++ GRUB_UINT64_C(0x6a09e667f3bcc908), GRUB_UINT64_C(0xbb67ae8584caa73b),
++ GRUB_UINT64_C(0x3c6ef372fe94f82b), GRUB_UINT64_C(0xa54ff53a5f1d36f1),
++ GRUB_UINT64_C(0x510e527fade682d1), GRUB_UINT64_C(0x9b05688c2b3e6c1f),
++ GRUB_UINT64_C(0x1f83d9abfb41bd6b), GRUB_UINT64_C(0x5be0cd19137e2179)};
++
++static const unsigned int blake2b_sigma[12][16] = {
++ {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15},
++ {14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3},
++ {11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4},
++ {7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8},
++ {9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13},
++ {2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9},
++ {12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11},
++ {13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10},
++ {6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5},
++ {10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0},
++ {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15},
++ {14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3},
++};
++
++void clear_internal_memory(void *v, grub_size_t n);
++
++static BLAKE2_INLINE void blake2b_set_lastnode(blake2b_state *S) {
++ S->f[1] = (grub_uint64_t)-1;
++}
++
++static BLAKE2_INLINE void blake2b_set_lastblock(blake2b_state *S) {
++ if (S->last_node) {
++ blake2b_set_lastnode(S);
++ }
++ S->f[0] = (grub_uint64_t)-1;
++}
++
++static BLAKE2_INLINE void blake2b_increment_counter(blake2b_state *S,
++ grub_uint64_t inc) {
++ S->t[0] += inc;
++ S->t[1] += (S->t[0] < inc);
++}
++
++static BLAKE2_INLINE void blake2b_invalidate_state(blake2b_state *S) {
++ clear_internal_memory(S, sizeof(*S)); /* wipe */
++ blake2b_set_lastblock(S); /* invalidate for further use */
++}
++
++static BLAKE2_INLINE void blake2b_init0(blake2b_state *S) {
++ grub_memset(S, 0, sizeof(*S));
++ grub_memcpy(S->h, blake2b_IV, sizeof(S->h));
++}
++
++int blake2b_init_param(blake2b_state *S, const blake2b_param *P) {
++ const unsigned char *p = (const unsigned char *)P;
++ unsigned int i;
++
++ if (NULL == P || NULL == S) {
++ return -1;
++ }
++
++ blake2b_init0(S);
++ /* IV XOR Parameter Block */
++ for (i = 0; i < 8; ++i) {
++ S->h[i] ^= load64(&p[i * sizeof(S->h[i])]);
++ }
++ S->outlen = P->digest_length;
++ return 0;
++}
++
++/* Sequential blake2b initialization */
++int blake2b_init(blake2b_state *S, grub_size_t outlen) {
++ blake2b_param P;
++
++ if (S == NULL) {
++ return -1;
++ }
++
++ if ((outlen == 0) || (outlen > BLAKE2B_OUTBYTES)) {
++ blake2b_invalidate_state(S);
++ return -1;
++ }
++
++ /* Setup Parameter Block for unkeyed BLAKE2 */
++ P.digest_length = (grub_uint8_t)outlen;
++ P.key_length = 0;
++ P.fanout = 1;
++ P.depth = 1;
++ P.leaf_length = 0;
++ P.node_offset = 0;
++ P.node_depth = 0;
++ P.inner_length = 0;
++ grub_memset(P.reserved, 0, sizeof(P.reserved));
++ grub_memset(P.salt, 0, sizeof(P.salt));
++ grub_memset(P.personal, 0, sizeof(P.personal));
++
++ return blake2b_init_param(S, &P);
++}
++
++int blake2b_init_key(blake2b_state *S, grub_size_t outlen, const void *key,
++ grub_size_t keylen) {
++ blake2b_param P;
++
++ if (S == NULL) {
++ return -1;
++ }
++
++ if ((outlen == 0) || (outlen > BLAKE2B_OUTBYTES)) {
++ blake2b_invalidate_state(S);
++ return -1;
++ }
++
++ if ((key == 0) || (keylen == 0) || (keylen > BLAKE2B_KEYBYTES)) {
++ blake2b_invalidate_state(S);
++ return -1;
++ }
++
++ /* Setup Parameter Block for keyed BLAKE2 */
++ P.digest_length = (grub_uint8_t)outlen;
++ P.key_length = (grub_uint8_t)keylen;
++ P.fanout = 1;
++ P.depth = 1;
++ P.leaf_length = 0;
++ P.node_offset = 0;
++ P.node_depth = 0;
++ P.inner_length = 0;
++ grub_memset(P.reserved, 0, sizeof(P.reserved));
++ grub_memset(P.salt, 0, sizeof(P.salt));
++ grub_memset(P.personal, 0, sizeof(P.personal));
++
++ if (blake2b_init_param(S, &P) < 0) {
++ blake2b_invalidate_state(S);
++ return -1;
++ }
++
++ {
++ grub_uint8_t block[BLAKE2B_BLOCKBYTES];
++ grub_memset(block, 0, BLAKE2B_BLOCKBYTES);
++ grub_memcpy(block, key, keylen);
++ blake2b_update(S, block, BLAKE2B_BLOCKBYTES);
++ /* Burn the key from stack */
++ clear_internal_memory(block, BLAKE2B_BLOCKBYTES);
++ }
++ return 0;
++}
++
++static void blake2b_compress(blake2b_state *S, const grub_uint8_t *block) {
++ grub_uint64_t m[16];
++ grub_uint64_t v[16];
++ unsigned int i, r;
++
++ for (i = 0; i < 16; ++i) {
++ m[i] = load64(block + i * sizeof(m[i]));
++ }
++
++ for (i = 0; i < 8; ++i) {
++ v[i] = S->h[i];
++ }
++
++ v[8] = blake2b_IV[0];
++ v[9] = blake2b_IV[1];
++ v[10] = blake2b_IV[2];
++ v[11] = blake2b_IV[3];
++ v[12] = blake2b_IV[4] ^ S->t[0];
++ v[13] = blake2b_IV[5] ^ S->t[1];
++ v[14] = blake2b_IV[6] ^ S->f[0];
++ v[15] = blake2b_IV[7] ^ S->f[1];
++
++#define G(r, i, a, b, c, d) \
++ do { \
++ a = a + b + m[blake2b_sigma[r][2 * i + 0]]; \
++ d = rotr64(d ^ a, 32); \
++ c = c + d; \
++ b = rotr64(b ^ c, 24); \
++ a = a + b + m[blake2b_sigma[r][2 * i + 1]]; \
++ d = rotr64(d ^ a, 16); \
++ c = c + d; \
++ b = rotr64(b ^ c, 63); \
++ } while ((void)0, 0)
++
++#define ROUND(r) \
++ do { \
++ G(r, 0, v[0], v[4], v[8], v[12]); \
++ G(r, 1, v[1], v[5], v[9], v[13]); \
++ G(r, 2, v[2], v[6], v[10], v[14]); \
++ G(r, 3, v[3], v[7], v[11], v[15]); \
++ G(r, 4, v[0], v[5], v[10], v[15]); \
++ G(r, 5, v[1], v[6], v[11], v[12]); \
++ G(r, 6, v[2], v[7], v[8], v[13]); \
++ G(r, 7, v[3], v[4], v[9], v[14]); \
++ } while ((void)0, 0)
++
++ for (r = 0; r < 12; ++r) {
++ ROUND(r);
++ }
++
++ for (i = 0; i < 8; ++i) {
++ S->h[i] = S->h[i] ^ v[i] ^ v[i + 8];
++ }
++
++#undef G
++#undef ROUND
++}
++
++int blake2b_update(blake2b_state *S, const void *in, grub_size_t inlen) {
++ const grub_uint8_t *pin = (const grub_uint8_t *)in;
++
++ if (inlen == 0) {
++ return 0;
++ }
++
++ /* Sanity check */
++ if (S == NULL || in == NULL) {
++ return -1;
++ }
++
++ /* Is this a reused state? */
++ if (S->f[0] != 0) {
++ return -1;
++ }
++
++ if (S->buflen + inlen > BLAKE2B_BLOCKBYTES) {
++ /* Complete current block */
++ grub_size_t left = S->buflen;
++ grub_size_t fill = BLAKE2B_BLOCKBYTES - left;
++ grub_memcpy(&S->buf[left], pin, fill);
++ blake2b_increment_counter(S, BLAKE2B_BLOCKBYTES);
++ blake2b_compress(S, S->buf);
++ S->buflen = 0;
++ inlen -= fill;
++ pin += fill;
++ /* Avoid buffer copies when possible */
++ while (inlen > BLAKE2B_BLOCKBYTES) {
++ blake2b_increment_counter(S, BLAKE2B_BLOCKBYTES);
++ blake2b_compress(S, pin);
++ inlen -= BLAKE2B_BLOCKBYTES;
++ pin += BLAKE2B_BLOCKBYTES;
++ }
++ }
++ grub_memcpy(&S->buf[S->buflen], pin, inlen);
++ S->buflen += (unsigned int)inlen;
++ return 0;
++}
++
++int blake2b_final(blake2b_state *S, void *out, grub_size_t outlen) {
++ grub_uint8_t buffer[BLAKE2B_OUTBYTES] = {0};
++ unsigned int i;
++
++ /* Sanity checks */
++ if (S == NULL || out == NULL || outlen < S->outlen) {
++ return -1;
++ }
++
++ /* Is this a reused state? */
++ if (S->f[0] != 0) {
++ return -1;
++ }
++
++ blake2b_increment_counter(S, S->buflen);
++ blake2b_set_lastblock(S);
++ grub_memset(&S->buf[S->buflen], 0, BLAKE2B_BLOCKBYTES - S->buflen); /* Padding */
++ blake2b_compress(S, S->buf);
++
++ for (i = 0; i < 8; ++i) { /* Output full hash to temp buffer */
++ store64(buffer + sizeof(S->h[i]) * i, S->h[i]);
++ }
++
++ grub_memcpy(out, buffer, S->outlen);
++ clear_internal_memory(buffer, sizeof(buffer));
++ clear_internal_memory(S->buf, sizeof(S->buf));
++ clear_internal_memory(S->h, sizeof(S->h));
++ return 0;
++}
++
++int blake2b(void *out, grub_size_t outlen, const void *in, grub_size_t inlen,
++ const void *key, grub_size_t keylen) {
++ blake2b_state S;
++ int ret = -1;
++
++ /* Verify parameters */
++ if (NULL == in && inlen > 0) {
++ goto fail;
++ }
++
++ if (NULL == out || outlen == 0 || outlen > BLAKE2B_OUTBYTES) {
++ goto fail;
++ }
++
++ if ((NULL == key && keylen > 0) || keylen > BLAKE2B_KEYBYTES) {
++ goto fail;
++ }
++
++ if (keylen > 0) {
++ if (blake2b_init_key(&S, outlen, key, keylen) < 0) {
++ goto fail;
++ }
++ } else {
++ if (blake2b_init(&S, outlen) < 0) {
++ goto fail;
++ }
++ }
++
++ if (blake2b_update(&S, in, inlen) < 0) {
++ goto fail;
++ }
++ ret = blake2b_final(&S, out, outlen);
++
++fail:
++ clear_internal_memory(&S, sizeof(S));
++ return ret;
++}
++
++/* Argon2 Team - Begin Code */
++int blake2b_long(void *pout, grub_size_t outlen, const void *in, grub_size_t inlen) {
++ grub_uint8_t *out = (grub_uint8_t *)pout;
++ blake2b_state blake_state;
++ grub_uint8_t outlen_bytes[sizeof(grub_uint32_t)] = {0};
++ int ret = -1;
++
++ if (outlen > GRUB_UINT32_MAX) {
++ goto fail;
++ }
++
++ /* Ensure little-endian byte order! */
++ store32(outlen_bytes, (grub_uint32_t)outlen);
++
++#define TRY(statement) \
++ do { \
++ ret = statement; \
++ if (ret < 0) { \
++ goto fail; \
++ } \
++ } while ((void)0, 0)
++
++ if (outlen <= BLAKE2B_OUTBYTES) {
++ TRY(blake2b_init(&blake_state, outlen));
++ TRY(blake2b_update(&blake_state, outlen_bytes, sizeof(outlen_bytes)));
++ TRY(blake2b_update(&blake_state, in, inlen));
++ TRY(blake2b_final(&blake_state, out, outlen));
++ } else {
++ grub_uint32_t toproduce;
++ grub_uint8_t out_buffer[BLAKE2B_OUTBYTES];
++ grub_uint8_t in_buffer[BLAKE2B_OUTBYTES];
++ TRY(blake2b_init(&blake_state, BLAKE2B_OUTBYTES));
++ TRY(blake2b_update(&blake_state, outlen_bytes, sizeof(outlen_bytes)));
++ TRY(blake2b_update(&blake_state, in, inlen));
++ TRY(blake2b_final(&blake_state, out_buffer, BLAKE2B_OUTBYTES));
++ grub_memcpy(out, out_buffer, BLAKE2B_OUTBYTES / 2);
++ out += BLAKE2B_OUTBYTES / 2;
++ toproduce = (grub_uint32_t)outlen - BLAKE2B_OUTBYTES / 2;
++
++ while (toproduce > BLAKE2B_OUTBYTES) {
++ grub_memcpy(in_buffer, out_buffer, BLAKE2B_OUTBYTES);
++ TRY(blake2b(out_buffer, BLAKE2B_OUTBYTES, in_buffer,
++ BLAKE2B_OUTBYTES, NULL, 0));
++ grub_memcpy(out, out_buffer, BLAKE2B_OUTBYTES / 2);
++ out += BLAKE2B_OUTBYTES / 2;
++ toproduce -= BLAKE2B_OUTBYTES / 2;
++ }
++
++ grub_memcpy(in_buffer, out_buffer, BLAKE2B_OUTBYTES);
++ TRY(blake2b(out_buffer, toproduce, in_buffer, BLAKE2B_OUTBYTES, NULL,
++ 0));
++ grub_memcpy(out, out_buffer, toproduce);
++ }
++fail:
++ clear_internal_memory(&blake_state, sizeof(blake_state));
++ return ret;
++#undef TRY
++}
++/* Argon2 Team - End Code */
+diff --git a/grub-core/lib/argon2/blake2/blamka-round-ref.h b/grub-core/lib/argon2/blake2/blamka-round-ref.h
+new file mode 100644
+index 000000000..7f0071ada
+--- /dev/null
++++ b/grub-core/lib/argon2/blake2/blamka-round-ref.h
+@@ -0,0 +1,56 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#ifndef BLAKE_ROUND_MKA_H
++#define BLAKE_ROUND_MKA_H
++
++#include "blake2.h"
++#include "blake2-impl.h"
++
++/* designed by the Lyra PHC team */
++static BLAKE2_INLINE grub_uint64_t fBlaMka(grub_uint64_t x, grub_uint64_t y) {
++ const grub_uint64_t m = GRUB_UINT64_C(0xFFFFFFFF);
++ const grub_uint64_t xy = (x & m) * (y & m);
++ return x + y + 2 * xy;
++}
++
++#define G(a, b, c, d) \
++ do { \
++ a = fBlaMka(a, b); \
++ d = rotr64(d ^ a, 32); \
++ c = fBlaMka(c, d); \
++ b = rotr64(b ^ c, 24); \
++ a = fBlaMka(a, b); \
++ d = rotr64(d ^ a, 16); \
++ c = fBlaMka(c, d); \
++ b = rotr64(b ^ c, 63); \
++ } while ((void)0, 0)
++
++#define BLAKE2_ROUND_NOMSG(v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, \
++ v12, v13, v14, v15) \
++ do { \
++ G(v0, v4, v8, v12); \
++ G(v1, v5, v9, v13); \
++ G(v2, v6, v10, v14); \
++ G(v3, v7, v11, v15); \
++ G(v0, v5, v10, v15); \
++ G(v1, v6, v11, v12); \
++ G(v2, v7, v8, v13); \
++ G(v3, v4, v9, v14); \
++ } while ((void)0, 0)
++
++#endif
+diff --git a/grub-core/lib/argon2/core.c b/grub-core/lib/argon2/core.c
+new file mode 100644
+index 000000000..0fe5b74cb
+--- /dev/null
++++ b/grub-core/lib/argon2/core.c
+@@ -0,0 +1,506 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++/*For memory wiping*/
++#ifdef _MSC_VER
++#include <windows.h>
++#include <winbase.h> /* For SecureZeroMemory */
++#endif
++#if defined __STDC_LIB_EXT1__
++#define __STDC_WANT_LIB_EXT1__ 1
++#endif
++#define VC_GE_2005(version) (version >= 1400)
++
++#include "core.h"
++#include "blake2/blake2.h"
++#include "blake2/blake2-impl.h"
++
++#ifdef GENKAT
++#include "genkat.h"
++#endif
++
++#if defined(__clang__)
++#if __has_attribute(optnone)
++#define NOT_OPTIMIZED __attribute__((optnone))
++#endif
++#elif defined(__GNUC__)
++#define GCC_VERSION \
++ (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
++#if GCC_VERSION >= 40400
++#define NOT_OPTIMIZED __attribute__((optimize("O0")))
++#endif
++#endif
++#ifndef NOT_OPTIMIZED
++#define NOT_OPTIMIZED
++#endif
++
++/***************Instance and Position constructors**********/
++void init_block_value(block *b, grub_uint8_t in) { grub_memset(b->v, in, sizeof(b->v)); }
++
++void copy_block(block *dst, const block *src) {
++ grub_memcpy(dst->v, src->v, sizeof(grub_uint64_t) * ARGON2_QWORDS_IN_BLOCK);
++}
++
++void xor_block(block *dst, const block *src) {
++ int i;
++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) {
++ dst->v[i] ^= src->v[i];
++ }
++}
++
++static void load_block(block *dst, const void *input) {
++ unsigned i;
++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) {
++ dst->v[i] = load64((const grub_uint8_t *)input + i * sizeof(dst->v[i]));
++ }
++}
++
++static void store_block(void *output, const block *src) {
++ unsigned i;
++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) {
++ store64((grub_uint8_t *)output + i * sizeof(src->v[i]), src->v[i]);
++ }
++}
++
++/***************Memory functions*****************/
++
++int allocate_memory(const argon2_context *context, grub_uint8_t **memory,
++ grub_size_t num, grub_size_t size) {
++ grub_size_t memory_size = num*size;
++ if (memory == NULL) {
++ return ARGON2_MEMORY_ALLOCATION_ERROR;
++ }
++
++ /* 1. Check for multiplication overflow */
++ if (size != 0 && memory_size / size != num) {
++ return ARGON2_MEMORY_ALLOCATION_ERROR;
++ }
++
++ /* 2. Try to allocate with appropriate allocator */
++ if (context->allocate_cbk) {
++ (context->allocate_cbk)(memory, memory_size);
++ } else {
++ *memory = grub_malloc(memory_size);
++ }
++
++ if (*memory == NULL) {
++ return ARGON2_MEMORY_ALLOCATION_ERROR;
++ }
++
++ return ARGON2_OK;
++}
++
++void grub_free_memory(const argon2_context *context, grub_uint8_t *memory,
++ grub_size_t num, grub_size_t size) {
++ grub_size_t memory_size = num*size;
++ clear_internal_memory(memory, memory_size);
++ if (context->grub_free_cbk) {
++ (context->grub_free_cbk)(memory, memory_size);
++ } else {
++ grub_free(memory);
++ }
++}
++
++void NOT_OPTIMIZED secure_wipe_memory(void *v, grub_size_t n) {
++ static void *(*const volatile grub_memset_sec)(void *, int, grub_size_t) = &grub_memset;
++ grub_memset_sec(v, 0, n);
++}
++
++/* Memory clear flag defaults to true. */
++int FLAG_clear_internal_memory = 1;
++void clear_internal_memory(void *v, grub_size_t n) {
++ if (FLAG_clear_internal_memory && v) {
++ secure_wipe_memory(v, n);
++ }
++}
++
++void finalize(const argon2_context *context, argon2_instance_t *instance) {
++ if (context != NULL && instance != NULL) {
++ block blockhash;
++ grub_uint32_t l;
++
++ copy_block(&blockhash, instance->memory + instance->lane_length - 1);
++
++ /* XOR the last blocks */
++ for (l = 1; l < instance->lanes; ++l) {
++ grub_uint32_t last_block_in_lane =
++ l * instance->lane_length + (instance->lane_length - 1);
++ xor_block(&blockhash, instance->memory + last_block_in_lane);
++ }
++
++ /* Hash the result */
++ {
++ grub_uint8_t blockhash_bytes[ARGON2_BLOCK_SIZE];
++ store_block(blockhash_bytes, &blockhash);
++ blake2b_long(context->out, context->outlen, blockhash_bytes,
++ ARGON2_BLOCK_SIZE);
++ /* clear blockhash and blockhash_bytes */
++ clear_internal_memory(blockhash.v, ARGON2_BLOCK_SIZE);
++ clear_internal_memory(blockhash_bytes, ARGON2_BLOCK_SIZE);
++ }
++
++#ifdef GENKAT
++ print_tag(context->out, context->outlen);
++#endif
++
++ grub_free_memory(context, (grub_uint8_t *)instance->memory,
++ instance->memory_blocks, sizeof(block));
++ }
++}
++
++grub_uint32_t index_alpha(const argon2_instance_t *instance,
++ const argon2_position_t *position, grub_uint32_t pseudo_rand,
++ int same_lane) {
++ /*
++ * Pass 0:
++ * This lane : all already finished segments plus already constructed
++ * blocks in this segment
++ * Other lanes : all already finished segments
++ * Pass 1+:
++ * This lane : (SYNC_POINTS - 1) last segments plus already constructed
++ * blocks in this segment
++ * Other lanes : (SYNC_POINTS - 1) last segments
++ */
++ grub_uint32_t reference_area_size;
++ grub_uint64_t relative_position;
++ grub_uint64_t start_position, absolute_position;
++
++ if (0 == position->pass) {
++ /* First pass */
++ if (0 == position->slice) {
++ /* First slice */
++ reference_area_size =
++ position->index - 1; /* all but the previous */
++ } else {
++ if (same_lane) {
++ /* The same lane => add current segment */
++ reference_area_size =
++ position->slice * instance->segment_length +
++ position->index - 1;
++ } else {
++ reference_area_size =
++ position->slice * instance->segment_length +
++ ((position->index == 0) ? (-1) : 0);
++ }
++ }
++ } else {
++ /* Second pass */
++ if (same_lane) {
++ reference_area_size = instance->lane_length -
++ instance->segment_length + position->index -
++ 1;
++ } else {
++ reference_area_size = instance->lane_length -
++ instance->segment_length +
++ ((position->index == 0) ? (-1) : 0);
++ }
++ }
++
++ /* 1.2.4. Mapping pseudo_rand to 0..<reference_area_size-1> and produce
++ * relative position */
++ relative_position = pseudo_rand;
++ relative_position = relative_position * relative_position >> 32;
++ relative_position = reference_area_size - 1 -
++ (reference_area_size * relative_position >> 32);
++
++ /* 1.2.5 Computing starting position */
++ start_position = 0;
++
++ if (0 != position->pass) {
++ start_position = (position->slice == ARGON2_SYNC_POINTS - 1)
++ ? 0
++ : (position->slice + 1) * instance->segment_length;
++ }
++
++ /* 1.2.6. Computing absolute position */
++ grub_divmod64 (start_position + relative_position, instance->lane_length,
++ &absolute_position); /* absolute position */
++ return absolute_position;
++}
++
++/* Single-threaded version for p=1 case */
++static int fill_memory_blocks_st(argon2_instance_t *instance) {
++ grub_uint32_t r, s, l;
++
++ for (r = 0; r < instance->passes; ++r) {
++ for (s = 0; s < ARGON2_SYNC_POINTS; ++s) {
++ for (l = 0; l < instance->lanes; ++l) {
++ argon2_position_t position = {r, l, (grub_uint8_t)s, 0};
++ fill_segment(instance, position);
++ }
++ }
++#ifdef GENKAT
++ internal_kat(instance, r); /* Print all memory blocks */
++#endif
++ }
++ return ARGON2_OK;
++}
++
++int fill_memory_blocks(argon2_instance_t *instance) {
++ if (instance == NULL || instance->lanes == 0) {
++ return ARGON2_INCORRECT_PARAMETER;
++ }
++ return fill_memory_blocks_st(instance);
++}
++
++int validate_inputs(const argon2_context *context) {
++ if (NULL == context) {
++ return ARGON2_INCORRECT_PARAMETER;
++ }
++
++ if (NULL == context->out) {
++ return ARGON2_OUTPUT_PTR_NULL;
++ }
++
++ /* Validate output length */
++ if (ARGON2_MIN_OUTLEN > context->outlen) {
++ return ARGON2_OUTPUT_TOO_SHORT;
++ }
++
++ if (ARGON2_MAX_OUTLEN < context->outlen) {
++ return ARGON2_OUTPUT_TOO_LONG;
++ }
++
++ /* Validate password (required param) */
++ if (NULL == context->pwd) {
++ if (0 != context->pwdlen) {
++ return ARGON2_PWD_PTR_MISMATCH;
++ }
++ }
++
++ if (ARGON2_MAX_PWD_LENGTH < context->pwdlen) {
++ return ARGON2_PWD_TOO_LONG;
++ }
++
++ /* Validate salt (required param) */
++ if (NULL == context->salt) {
++ if (0 != context->saltlen) {
++ return ARGON2_SALT_PTR_MISMATCH;
++ }
++ }
++
++ if (ARGON2_MIN_SALT_LENGTH > context->saltlen) {
++ return ARGON2_SALT_TOO_SHORT;
++ }
++
++ if (ARGON2_MAX_SALT_LENGTH < context->saltlen) {
++ return ARGON2_SALT_TOO_LONG;
++ }
++
++ /* Validate secret (optional param) */
++ if (NULL == context->secret) {
++ if (0 != context->secretlen) {
++ return ARGON2_SECRET_PTR_MISMATCH;
++ }
++ } else {
++ if (ARGON2_MAX_SECRET < context->secretlen) {
++ return ARGON2_SECRET_TOO_LONG;
++ }
++ }
++
++ /* Validate associated data (optional param) */
++ if (NULL == context->ad) {
++ if (0 != context->adlen) {
++ return ARGON2_AD_PTR_MISMATCH;
++ }
++ } else {
++ if (ARGON2_MAX_AD_LENGTH < context->adlen) {
++ return ARGON2_AD_TOO_LONG;
++ }
++ }
++
++ /* Validate memory cost */
++ if (ARGON2_MIN_MEMORY > context->m_cost) {
++ return ARGON2_MEMORY_TOO_LITTLE;
++ }
++
++ if (context->m_cost < 8 * context->lanes) {
++ return ARGON2_MEMORY_TOO_LITTLE;
++ }
++
++ /* Validate time cost */
++ if (ARGON2_MIN_TIME > context->t_cost) {
++ return ARGON2_TIME_TOO_SMALL;
++ }
++
++ if (ARGON2_MAX_TIME < context->t_cost) {
++ return ARGON2_TIME_TOO_LARGE;
++ }
++
++ /* Validate lanes */
++ if (ARGON2_MIN_LANES > context->lanes) {
++ return ARGON2_LANES_TOO_FEW;
++ }
++
++ if (ARGON2_MAX_LANES < context->lanes) {
++ return ARGON2_LANES_TOO_MANY;
++ }
++
++ /* Validate threads */
++ if (ARGON2_MIN_THREADS > context->threads) {
++ return ARGON2_THREADS_TOO_FEW;
++ }
++
++ if (ARGON2_MAX_THREADS < context->threads) {
++ return ARGON2_THREADS_TOO_MANY;
++ }
++
++ if (NULL != context->allocate_cbk && NULL == context->grub_free_cbk) {
++ return ARGON2_FREE_MEMORY_CBK_NULL;
++ }
++
++ if (NULL == context->allocate_cbk && NULL != context->grub_free_cbk) {
++ return ARGON2_ALLOCATE_MEMORY_CBK_NULL;
++ }
++
++ return ARGON2_OK;
++}
++
++void fill_first_blocks(grub_uint8_t *blockhash, const argon2_instance_t *instance) {
++ grub_uint32_t l;
++ /* Make the first and second block in each lane as G(H0||0||i) or
++ G(H0||1||i) */
++ grub_uint8_t blockhash_bytes[ARGON2_BLOCK_SIZE];
++ for (l = 0; l < instance->lanes; ++l) {
++
++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, 0);
++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH + 4, l);
++ blake2b_long(blockhash_bytes, ARGON2_BLOCK_SIZE, blockhash,
++ ARGON2_PREHASH_SEED_LENGTH);
++ load_block(&instance->memory[l * instance->lane_length + 0],
++ blockhash_bytes);
++
++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, 1);
++ blake2b_long(blockhash_bytes, ARGON2_BLOCK_SIZE, blockhash,
++ ARGON2_PREHASH_SEED_LENGTH);
++ load_block(&instance->memory[l * instance->lane_length + 1],
++ blockhash_bytes);
++ }
++ clear_internal_memory(blockhash_bytes, ARGON2_BLOCK_SIZE);
++}
++
++void initial_hash(grub_uint8_t *blockhash, argon2_context *context,
++ argon2_type type) {
++ blake2b_state BlakeHash;
++ grub_uint8_t value[sizeof(grub_uint32_t)];
++
++ if (NULL == context || NULL == blockhash) {
++ return;
++ }
++
++ blake2b_init(&BlakeHash, ARGON2_PREHASH_DIGEST_LENGTH);
++
++ store32(&value, context->lanes);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ store32(&value, context->outlen);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ store32(&value, context->m_cost);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ store32(&value, context->t_cost);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ store32(&value, context->version);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ store32(&value, (grub_uint32_t)type);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ store32(&value, context->pwdlen);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ if (context->pwd != NULL) {
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->pwd,
++ context->pwdlen);
++
++ if (context->flags & ARGON2_FLAG_CLEAR_PASSWORD) {
++ secure_wipe_memory(context->pwd, context->pwdlen);
++ context->pwdlen = 0;
++ }
++ }
++
++ store32(&value, context->saltlen);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ if (context->salt != NULL) {
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->salt,
++ context->saltlen);
++ }
++
++ store32(&value, context->secretlen);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ if (context->secret != NULL) {
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->secret,
++ context->secretlen);
++
++ if (context->flags & ARGON2_FLAG_CLEAR_SECRET) {
++ secure_wipe_memory(context->secret, context->secretlen);
++ context->secretlen = 0;
++ }
++ }
++
++ store32(&value, context->adlen);
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value));
++
++ if (context->ad != NULL) {
++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->ad,
++ context->adlen);
++ }
++
++ blake2b_final(&BlakeHash, blockhash, ARGON2_PREHASH_DIGEST_LENGTH);
++}
++
++int initialize(argon2_instance_t *instance, argon2_context *context) {
++ grub_uint8_t blockhash[ARGON2_PREHASH_SEED_LENGTH];
++ int result = ARGON2_OK;
++
++ if (instance == NULL || context == NULL)
++ return ARGON2_INCORRECT_PARAMETER;
++ instance->context_ptr = context;
++
++ /* 1. Memory allocation */
++ result = allocate_memory(context, (grub_uint8_t **)&(instance->memory),
++ instance->memory_blocks, sizeof(block));
++ if (result != ARGON2_OK) {
++ return result;
++ }
++
++ /* 2. Initial hashing */
++ /* H_0 + 8 extra bytes to produce the first blocks */
++ /* grub_uint8_t blockhash[ARGON2_PREHASH_SEED_LENGTH]; */
++ /* Hashing all inputs */
++ initial_hash(blockhash, context, instance->type);
++ /* Zeroing 8 extra bytes */
++ clear_internal_memory(blockhash + ARGON2_PREHASH_DIGEST_LENGTH,
++ ARGON2_PREHASH_SEED_LENGTH -
++ ARGON2_PREHASH_DIGEST_LENGTH);
++
++#ifdef GENKAT
++ initial_kat(blockhash, context, instance->type);
++#endif
++
++ /* 3. Creating first blocks, we always have at least two blocks in a slice
++ */
++ fill_first_blocks(blockhash, instance);
++ /* Clearing the hash */
++ clear_internal_memory(blockhash, ARGON2_PREHASH_SEED_LENGTH);
++
++ return ARGON2_OK;
++}
+diff --git a/grub-core/lib/argon2/core.h b/grub-core/lib/argon2/core.h
+new file mode 100644
+index 000000000..bbcd56998
+--- /dev/null
++++ b/grub-core/lib/argon2/core.h
+@@ -0,0 +1,228 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#ifndef ARGON2_CORE_H
++#define ARGON2_CORE_H
++
++#include "argon2.h"
++
++#define CONST_CAST(x) (x)(grub_addr_t)
++
++/**********************Argon2 internal constants*******************************/
++
++enum argon2_core_constants {
++ /* Memory block size in bytes */
++ ARGON2_BLOCK_SIZE = 1024,
++ ARGON2_QWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 8,
++ ARGON2_OWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 16,
++ ARGON2_HWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 32,
++ ARGON2_512BIT_WORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 64,
++
++ /* Number of pseudo-random values generated by one call to Blake in Argon2i
++ to
++ generate reference block positions */
++ ARGON2_ADDRESSES_IN_BLOCK = 128,
++
++ /* Pre-hashing digest length and its extension*/
++ ARGON2_PREHASH_DIGEST_LENGTH = 64,
++ ARGON2_PREHASH_SEED_LENGTH = 72
++};
++
++/*************************Argon2 internal data types***********************/
++
++/*
++ * Structure for the (1KB) memory block implemented as 128 64-bit words.
++ * Memory blocks can be copied, XORed. Internal words can be accessed by [] (no
++ * bounds checking).
++ */
++typedef struct block_ { grub_uint64_t v[ARGON2_QWORDS_IN_BLOCK]; } block;
++
++/*****************Functions that work with the block******************/
++
++/* Initialize each byte of the block with @in */
++void init_block_value(block *b, grub_uint8_t in);
++
++/* Copy block @src to block @dst */
++void copy_block(block *dst, const block *src);
++
++/* XOR @src onto @dst bytewise */
++void xor_block(block *dst, const block *src);
++
++/*
++ * Argon2 instance: memory pointer, number of passes, amount of memory, type,
++ * and derived values.
++ * Used to evaluate the number and location of blocks to construct in each
++ * thread
++ */
++typedef struct Argon2_instance_t {
++ block *memory; /* Memory pointer */
++ grub_uint32_t version;
++ grub_uint32_t passes; /* Number of passes */
++ grub_uint32_t memory_blocks; /* Number of blocks in memory */
++ grub_uint32_t segment_length;
++ grub_uint32_t lane_length;
++ grub_uint32_t lanes;
++ grub_uint32_t threads;
++ argon2_type type;
++ int print_internals; /* whether to print the memory blocks */
++ argon2_context *context_ptr; /* points back to original context */
++} argon2_instance_t;
++
++/*
++ * Argon2 position: where we construct the block right now. Used to distribute
++ * work between threads.
++ */
++typedef struct Argon2_position_t {
++ grub_uint32_t pass;
++ grub_uint32_t lane;
++ grub_uint8_t slice;
++ grub_uint32_t index;
++} argon2_position_t;
++
++/*Struct that holds the inputs for thread handling FillSegment*/
++typedef struct Argon2_thread_data {
++ argon2_instance_t *instance_ptr;
++ argon2_position_t pos;
++} argon2_thread_data;
++
++/*************************Argon2 core functions********************************/
++
++/* Allocates memory to the given pointer, uses the appropriate allocator as
++ * specified in the context. Total allocated memory is num*size.
++ * @param context argon2_context which specifies the allocator
++ * @param memory pointer to the pointer to the memory
++ * @param size the size in bytes for each element to be allocated
++ * @param num the number of elements to be allocated
++ * @return ARGON2_OK if @memory is a valid pointer and memory is allocated
++ */
++int allocate_memory(const argon2_context *context, grub_uint8_t **memory,
++ grub_size_t num, grub_size_t size);
++
++/*
++ * Frees memory at the given pointer, uses the appropriate deallocator as
++ * specified in the context. Also cleans the memory using clear_internal_memory.
++ * @param context argon2_context which specifies the deallocator
++ * @param memory pointer to buffer to be grub_freed
++ * @param size the size in bytes for each element to be deallocated
++ * @param num the number of elements to be deallocated
++ */
++void grub_free_memory(const argon2_context *context, grub_uint8_t *memory,
++ grub_size_t num, grub_size_t size);
++
++/* Function that securely cleans the memory. This ignores any flags set
++ * regarding clearing memory. Usually one just calls clear_internal_memory.
++ * @param mem Pointer to the memory
++ * @param s Memory size in bytes
++ */
++void secure_wipe_memory(void *v, grub_size_t n);
++
++/* Function that securely clears the memory if FLAG_clear_internal_memory is
++ * set. If the flag isn't set, this function does nothing.
++ * @param mem Pointer to the memory
++ * @param s Memory size in bytes
++ */
++void clear_internal_memory(void *v, grub_size_t n);
++
++/*
++ * Computes absolute position of reference block in the lane following a skewed
++ * distribution and using a pseudo-random value as input
++ * @param instance Pointer to the current instance
++ * @param position Pointer to the current position
++ * @param pseudo_rand 32-bit pseudo-random value used to determine the position
++ * @param same_lane Indicates if the block will be taken from the current lane.
++ * If so we can reference the current segment
++ * @pre All pointers must be valid
++ */
++grub_uint32_t index_alpha(const argon2_instance_t *instance,
++ const argon2_position_t *position, grub_uint32_t pseudo_rand,
++ int same_lane);
++
++/*
++ * Function that validates all inputs against predefined restrictions and return
++ * an error code
++ * @param context Pointer to current Argon2 context
++ * @return ARGON2_OK if everything is all right, otherwise one of error codes
++ * (all defined in <argon2.h>
++ */
++int validate_inputs(const argon2_context *context);
++
++/*
++ * Hashes all the inputs into @a blockhash[PREHASH_DIGEST_LENGTH], clears
++ * password and secret if needed
++ * @param context Pointer to the Argon2 internal structure containing memory
++ * pointer, and parameters for time and space requirements.
++ * @param blockhash Buffer for pre-hashing digest
++ * @param type Argon2 type
++ * @pre @a blockhash must have at least @a PREHASH_DIGEST_LENGTH bytes
++ * allocated
++ */
++void initial_hash(grub_uint8_t *blockhash, argon2_context *context,
++ argon2_type type);
++
++/*
++ * Function creates first 2 blocks per lane
++ * @param instance Pointer to the current instance
++ * @param blockhash Pointer to the pre-hashing digest
++ * @pre blockhash must point to @a PREHASH_SEED_LENGTH allocated values
++ */
++void fill_first_blocks(grub_uint8_t *blockhash, const argon2_instance_t *instance);
++
++/*
++ * Function allocates memory, hashes the inputs with Blake, and creates first
++ * two blocks. Returns the pointer to the main memory with 2 blocks per lane
++ * initialized
++ * @param context Pointer to the Argon2 internal structure containing memory
++ * pointer, and parameters for time and space requirements.
++ * @param instance Current Argon2 instance
++ * @return Zero if successful, -1 if memory failed to allocate. @context->state
++ * will be modified if successful.
++ */
++int initialize(argon2_instance_t *instance, argon2_context *context);
++
++/*
++ * XORing the last block of each lane, hashing it, making the tag. Deallocates
++ * the memory.
++ * @param context Pointer to current Argon2 context (use only the out parameters
++ * from it)
++ * @param instance Pointer to current instance of Argon2
++ * @pre instance->state must point to necessary amount of memory
++ * @pre context->out must point to outlen bytes of memory
++ * @pre if context->grub_free_cbk is not NULL, it should point to a function that
++ * deallocates memory
++ */
++void finalize(const argon2_context *context, argon2_instance_t *instance);
++
++/*
++ * Function that fills the segment using previous segments also from other
++ * threads
++ * @param context current context
++ * @param instance Pointer to the current instance
++ * @param position Current position
++ * @pre all block pointers must be valid
++ */
++void fill_segment(const argon2_instance_t *instance,
++ argon2_position_t position);
++
++/*
++ * Function that fills the entire memory t_cost times based on the first two
++ * blocks in each lane
++ * @param instance Pointer to the current instance
++ * @return ARGON2_OK if successful, @context->state
++ */
++int fill_memory_blocks(argon2_instance_t *instance);
++
++#endif
+diff --git a/grub-core/lib/argon2/ref.c b/grub-core/lib/argon2/ref.c
+new file mode 100644
+index 000000000..c933df80d
+--- /dev/null
++++ b/grub-core/lib/argon2/ref.c
+@@ -0,0 +1,190 @@
++/*
++ * Argon2 reference source code package - reference C implementations
++ *
++ * Copyright 2015
++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves
++ *
++ * You may use this work under the terms of a Creative Commons CC0 1.0
++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of
++ * these licenses can be found at:
++ *
++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
++ *
++ * You should have received a copy of both of these licenses along with this
++ * software. If not, they may be obtained at the above URLs.
++ */
++
++#include "argon2.h"
++#include "core.h"
++
++#include "blake2/blamka-round-ref.h"
++#include "blake2/blake2-impl.h"
++#include "blake2/blake2.h"
++
++
++/*
++ * Function fills a new memory block and optionally XORs the old block over the new one.
++ * @next_block must be initialized.
++ * @param prev_block Pointer to the previous block
++ * @param ref_block Pointer to the reference block
++ * @param next_block Pointer to the block to be constructed
++ * @param with_xor Whether to XOR into the new block (1) or just overwrite (0)
++ * @pre all block pointers must be valid
++ */
++static void fill_block(const block *prev_block, const block *ref_block,
++ block *next_block, int with_xor) {
++ block blockR, block_tmp;
++ unsigned i;
++
++ copy_block(&blockR, ref_block);
++ xor_block(&blockR, prev_block);
++ copy_block(&block_tmp, &blockR);
++ /* Now blockR = ref_block + prev_block and block_tmp = ref_block + prev_block */
++ if (with_xor) {
++ /* Saving the next block contents for XOR over: */
++ xor_block(&block_tmp, next_block);
++ /* Now blockR = ref_block + prev_block and
++ block_tmp = ref_block + prev_block + next_block */
++ }
++
++ /* Apply Blake2 on columns of 64-bit words: (0,1,...,15) , then
++ (16,17,..31)... finally (112,113,...127) */
++ for (i = 0; i < 8; ++i) {
++ BLAKE2_ROUND_NOMSG(
++ blockR.v[16 * i], blockR.v[16 * i + 1], blockR.v[16 * i + 2],
++ blockR.v[16 * i + 3], blockR.v[16 * i + 4], blockR.v[16 * i + 5],
++ blockR.v[16 * i + 6], blockR.v[16 * i + 7], blockR.v[16 * i + 8],
++ blockR.v[16 * i + 9], blockR.v[16 * i + 10], blockR.v[16 * i + 11],
++ blockR.v[16 * i + 12], blockR.v[16 * i + 13], blockR.v[16 * i + 14],
++ blockR.v[16 * i + 15]);
++ }
++
++ /* Apply Blake2 on rows of 64-bit words: (0,1,16,17,...112,113), then
++ (2,3,18,19,...,114,115).. finally (14,15,30,31,...,126,127) */
++ for (i = 0; i < 8; i++) {
++ BLAKE2_ROUND_NOMSG(
++ blockR.v[2 * i], blockR.v[2 * i + 1], blockR.v[2 * i + 16],
++ blockR.v[2 * i + 17], blockR.v[2 * i + 32], blockR.v[2 * i + 33],
++ blockR.v[2 * i + 48], blockR.v[2 * i + 49], blockR.v[2 * i + 64],
++ blockR.v[2 * i + 65], blockR.v[2 * i + 80], blockR.v[2 * i + 81],
++ blockR.v[2 * i + 96], blockR.v[2 * i + 97], blockR.v[2 * i + 112],
++ blockR.v[2 * i + 113]);
++ }
++
++ copy_block(next_block, &block_tmp);
++ xor_block(next_block, &blockR);
++}
++
++static void next_addresses(block *address_block, block *input_block,
++ const block *zero_block) {
++ input_block->v[6]++;
++ fill_block(zero_block, input_block, address_block, 0);
++ fill_block(zero_block, address_block, address_block, 0);
++}
++
++void fill_segment(const argon2_instance_t *instance,
++ argon2_position_t position) {
++ block *ref_block = NULL, *curr_block = NULL;
++ block address_block, input_block, zero_block;
++ grub_uint64_t pseudo_rand, ref_index, ref_lane;
++ grub_uint32_t prev_offset, curr_offset;
++ grub_uint32_t starting_index;
++ grub_uint32_t i;
++ int data_independent_addressing;
++
++ if (instance == NULL) {
++ return;
++ }
++
++ data_independent_addressing =
++ (instance->type == Argon2_i) ||
++ (instance->type == Argon2_id && (position.pass == 0) &&
++ (position.slice < ARGON2_SYNC_POINTS / 2));
++
++ if (data_independent_addressing) {
++ init_block_value(&zero_block, 0);
++ init_block_value(&input_block, 0);
++
++ input_block.v[0] = position.pass;
++ input_block.v[1] = position.lane;
++ input_block.v[2] = position.slice;
++ input_block.v[3] = instance->memory_blocks;
++ input_block.v[4] = instance->passes;
++ input_block.v[5] = instance->type;
++ }
++
++ starting_index = 0;
++
++ if ((0 == position.pass) && (0 == position.slice)) {
++ starting_index = 2; /* we have already generated the first two blocks */
++
++ /* Don't forget to generate the first block of addresses: */
++ if (data_independent_addressing) {
++ next_addresses(&address_block, &input_block, &zero_block);
++ }
++ }
++
++ /* Offset of the current block */
++ curr_offset = position.lane * instance->lane_length +
++ position.slice * instance->segment_length + starting_index;
++
++ if (0 == curr_offset % instance->lane_length) {
++ /* Last block in this lane */
++ prev_offset = curr_offset + instance->lane_length - 1;
++ } else {
++ /* Previous block */
++ prev_offset = curr_offset - 1;
++ }
++
++ for (i = starting_index; i < instance->segment_length;
++ ++i, ++curr_offset, ++prev_offset) {
++ /*1.1 Rotating prev_offset if needed */
++ if (curr_offset % instance->lane_length == 1) {
++ prev_offset = curr_offset - 1;
++ }
++
++ /* 1.2 Computing the index of the reference block */
++ /* 1.2.1 Taking pseudo-random value from the previous block */
++ if (data_independent_addressing) {
++ if (i % ARGON2_ADDRESSES_IN_BLOCK == 0) {
++ next_addresses(&address_block, &input_block, &zero_block);
++ }
++ pseudo_rand = address_block.v[i % ARGON2_ADDRESSES_IN_BLOCK];
++ } else {
++ pseudo_rand = instance->memory[prev_offset].v[0];
++ }
++
++ /* 1.2.2 Computing the lane of the reference block */
++ grub_divmod64 (pseudo_rand >> 32, instance->lanes, &ref_lane);
++
++ if ((position.pass == 0) && (position.slice == 0)) {
++ /* Can not reference other lanes yet */
++ ref_lane = position.lane;
++ }
++
++ /* 1.2.3 Computing the number of possible reference block within the
++ * lane.
++ */
++ position.index = i;
++ ref_index = index_alpha(instance, &position, pseudo_rand & 0xFFFFFFFF,
++ ref_lane == position.lane);
++
++ /* 2 Creating a new block */
++ ref_block =
++ instance->memory + instance->lane_length * ref_lane + ref_index;
++ curr_block = instance->memory + curr_offset;
++ if (ARGON2_VERSION_10 == instance->version) {
++ /* version 1.2.1 and earlier: overwrite, not XOR */
++ fill_block(instance->memory + prev_offset, ref_block, curr_block, 0);
++ } else {
++ if(0 == position.pass) {
++ fill_block(instance->memory + prev_offset, ref_block,
++ curr_block, 0);
++ } else {
++ fill_block(instance->memory + prev_offset, ref_block,
++ curr_block, 1);
++ }
++ }
++ }
++}
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch b/config/grub/nvme/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch
new file mode 100644
index 00000000..5d56bd61
--- /dev/null
+++ b/config/grub/nvme/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch
@@ -0,0 +1,58 @@
+From 0044d32121bf52c4547c6b3c78f12d7305f57e6b Mon Sep 17 00:00:00 2001
+From: Ax333l <main@axelen.xyz>
+Date: Thu, 17 Aug 2023 00:00:00 +0000
+Subject: [PATCH 4/6] Error on missing Argon2id parameters
+
+Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
+---
+ grub-core/disk/luks2.c | 13 ++++++++-----
+ 1 file changed, 8 insertions(+), 5 deletions(-)
+
+diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c
+index d5106402f..bc818ea69 100644
+--- a/grub-core/disk/luks2.c
++++ b/grub-core/disk/luks2.c
+@@ -38,6 +38,7 @@ GRUB_MOD_LICENSE ("GPLv3+");
+ enum grub_luks2_kdf_type
+ {
+ LUKS2_KDF_TYPE_ARGON2I,
++ LUKS2_KDF_TYPE_ARGON2ID,
+ LUKS2_KDF_TYPE_PBKDF2
+ };
+ typedef enum grub_luks2_kdf_type grub_luks2_kdf_type_t;
+@@ -90,7 +91,7 @@ struct grub_luks2_keyslot
+ grub_int64_t time;
+ grub_int64_t memory;
+ grub_int64_t cpus;
+- } argon2i;
++ } argon2;
+ struct
+ {
+ const char *hash;
+@@ -160,10 +161,11 @@ luks2_parse_keyslot (grub_luks2_keyslot_t *out, const grub_json_t *keyslot)
+ return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing or invalid KDF");
+ else if (!grub_strcmp (type, "argon2i") || !grub_strcmp (type, "argon2id"))
+ {
+- out->kdf.type = LUKS2_KDF_TYPE_ARGON2I;
+- if (grub_json_getint64 (&out->kdf.u.argon2i.time, &kdf, "time") ||
+- grub_json_getint64 (&out->kdf.u.argon2i.memory, &kdf, "memory") ||
+- grub_json_getint64 (&out->kdf.u.argon2i.cpus, &kdf, "cpus"))
++ out->kdf.type = !grub_strcmp (type, "argon2i")
++ ? LUKS2_KDF_TYPE_ARGON2I : LUKS2_KDF_TYPE_ARGON2ID;
++ if (grub_json_getint64 (&out->kdf.u.argon2.time, &kdf, "time") ||
++ grub_json_getint64 (&out->kdf.u.argon2.memory, &kdf, "memory") ||
++ grub_json_getint64 (&out->kdf.u.argon2.cpus, &kdf, "cpus"))
+ return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing Argon2i parameters");
+ }
+ else if (!grub_strcmp (type, "pbkdf2"))
+@@ -459,6 +461,7 @@ luks2_decrypt_key (grub_uint8_t *out_key,
+ switch (k->kdf.type)
+ {
+ case LUKS2_KDF_TYPE_ARGON2I:
++ case LUKS2_KDF_TYPE_ARGON2ID:
+ ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported");
+ goto err;
+ case LUKS2_KDF_TYPE_PBKDF2:
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch b/config/grub/nvme/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch
new file mode 100644
index 00000000..f2e26fd4
--- /dev/null
+++ b/config/grub/nvme/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch
@@ -0,0 +1,83 @@
+From 0a21695c55f76f1c958bb633481d55b3168562f7 Mon Sep 17 00:00:00 2001
+From: Ax333l <main@axelen.xyz>
+Date: Thu, 17 Aug 2023 00:00:00 +0000
+Subject: [PATCH 5/6] Compile with Argon2id support
+
+Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
+---
+ Makefile.util.def | 6 +++++-
+ grub-core/Makefile.core.def | 2 +-
+ grub-core/disk/luks2.c | 13 +++++++++++--
+ 3 files changed, 17 insertions(+), 4 deletions(-)
+
+diff --git a/Makefile.util.def b/Makefile.util.def
+index 1e9a13d3e..a167825c3 100644
+--- a/Makefile.util.def
++++ b/Makefile.util.def
+@@ -3,7 +3,7 @@ AutoGen definitions Makefile.tpl;
+ library = {
+ name = libgrubkern.a;
+ cflags = '$(CFLAGS_GNULIB)';
+- cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json';
++ cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json -I$(srcdir)/grub-core/lib/argon2';
+
+ common = util/misc.c;
+ common = grub-core/kern/command.c;
+@@ -36,6 +36,10 @@ library = {
+ common = grub-core/kern/misc.c;
+ common = grub-core/kern/partition.c;
+ common = grub-core/lib/crypto.c;
++ common = grub-core/lib/argon2/argon2.c;
++ common = grub-core/lib/argon2/core.c;
++ common = grub-core/lib/argon2/ref.c;
++ common = grub-core/lib/argon2/blake2/blake2b.c;
+ common = grub-core/lib/json/json.c;
+ common = grub-core/disk/luks.c;
+ common = grub-core/disk/luks2.c;
+diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def
+index 4a06789e5..e939dcc99 100644
+--- a/grub-core/Makefile.core.def
++++ b/grub-core/Makefile.core.def
+@@ -1238,7 +1238,7 @@ module = {
+ common = disk/luks2.c;
+ common = lib/gnulib/base64.c;
+ cflags = '$(CFLAGS_POSIX) $(CFLAGS_GNULIB)';
+- cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json';
++ cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json -I$(srcdir)/lib/argon2';
+ };
+
+ module = {
+diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c
+index bc818ea69..5b9eaa599 100644
+--- a/grub-core/disk/luks2.c
++++ b/grub-core/disk/luks2.c
+@@ -27,6 +27,7 @@
+ #include <grub/partition.h>
+ #include <grub/i18n.h>
+
++#include <argon2.h>
+ #include <base64.h>
+ #include <json.h>
+
+@@ -462,8 +463,16 @@ luks2_decrypt_key (grub_uint8_t *out_key,
+ {
+ case LUKS2_KDF_TYPE_ARGON2I:
+ case LUKS2_KDF_TYPE_ARGON2ID:
+- ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported");
+- goto err;
++ ret = argon2_hash (k->kdf.u.argon2.time, k->kdf.u.argon2.memory, k->kdf.u.argon2.cpus,
++ passphrase, passphraselen, salt, saltlen, area_key, k->area.key_size,
++ k->kdf.type == LUKS2_KDF_TYPE_ARGON2I ? Argon2_i : Argon2_id,
++ ARGON2_VERSION_NUMBER);
++ if (ret)
++ {
++ grub_dprintf ("luks2", "Argon2 failed: %s\n", argon2_error_message (ret));
++ goto err;
++ }
++ break;
+ case LUKS2_KDF_TYPE_PBKDF2:
+ hash = grub_crypto_lookup_md_by_name (k->kdf.u.pbkdf2.hash);
+ if (!hash)
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch b/config/grub/nvme/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch
new file mode 100644
index 00000000..dc65b7a6
--- /dev/null
+++ b/config/grub/nvme/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch
@@ -0,0 +1,26 @@
+From 6c9a6625c0dc038d1bdbdc13665f40e269e86496 Mon Sep 17 00:00:00 2001
+From: Ax333l <main@axelen.xyz>
+Date: Thu, 17 Aug 2023 00:00:00 +0000
+Subject: [PATCH 6/6] Make grub-install work with Argon2
+
+Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch>
+---
+ util/grub-install.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/util/grub-install.c b/util/grub-install.c
+index 1ad04db36..a8a3330b8 100644
+--- a/util/grub-install.c
++++ b/util/grub-install.c
+@@ -448,6 +448,8 @@ probe_mods (grub_disk_t disk)
+ {
+ grub_util_cryptodisk_get_abstraction (disk,
+ push_cryptodisk_module, NULL);
++ /* HACK: always push argon2 */
++ grub_install_push_module ("argon2");
+ have_abstractions = 1;
+ have_cryptodisk = 1;
+ }
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch b/config/grub/nvme/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch
new file mode 100644
index 00000000..21e8630b
--- /dev/null
+++ b/config/grub/nvme/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch
@@ -0,0 +1,107 @@
+From 96c0bbe5d406b616360a7fce7cee67d7692c0d6d Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Mon, 30 Oct 2023 22:19:21 +0000
+Subject: [PATCH 1/1] at_keyboard coreboot: force scancodes2+translate
+
+Scan code set 2 with translation should be assumed in
+every case, as the default starting position.
+
+However, GRUB is trying to detect and use other modes
+such as set 2 without translation, or set 1 without
+translation from set 2; it also detects no-mode and
+assumes mode 1, on really old keyboards.
+
+The current behaviour has been retained, for everything
+except GRUB_MACHINE_COREBOOT; for the latter, scan code
+set 2 with translation is hardcoded, and forced in code.
+
+This is required to make keyboard initialisation work on
+the MEC5035 EC used by the Dell Latitude E6400, when
+running GRUB as a coreboot payload on that laptop. The
+EC reports scancode set 2 with translation when probed,
+but actually only outputs scancode set 1.
+
+Since GRUB is attempting to use it without translation,
+and since the machine reports set 2 with translation,
+but only ever outputs set 1 scancodes, this results in
+wrong keypresses for every key.
+
+This fix fixed that, by forcing set 2 with translation,
+treating it as set 1, but only on coreboot. This is the
+same behaviour used in GNU+Linux systems and SeaBIOS.
+With this change, GRUB keyboard initialisation now works
+just fine on those machines.
+
+This has *also* been tested on other coreboot machines
+running GRUB; several HP EliteBooks, ThinkPads and
+Dell Precision T1650. All seems to work just fine.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ grub-core/term/at_keyboard.c | 20 ++++++++++++++++++--
+ 1 file changed, 18 insertions(+), 2 deletions(-)
+
+diff --git a/grub-core/term/at_keyboard.c b/grub-core/term/at_keyboard.c
+index f8a129eb7..8207225c2 100644
+--- a/grub-core/term/at_keyboard.c
++++ b/grub-core/term/at_keyboard.c
+@@ -138,6 +138,7 @@ write_mode (int mode)
+ return (i != GRUB_AT_TRIES);
+ }
+
++#if !defined (GRUB_MACHINE_COREBOOT)
+ static int
+ query_mode (void)
+ {
+@@ -161,10 +162,12 @@ query_mode (void)
+ return 3;
+ return 0;
+ }
++#endif
+
+ static void
+ set_scancodes (void)
+ {
++#if !defined (GRUB_MACHINE_COREBOOT)
+ /* You must have visited computer museum. Keyboard without scancode set
+ knowledge. Assume XT. */
+ if (!grub_keyboard_orig_set)
+@@ -173,20 +176,33 @@ set_scancodes (void)
+ ps2_state.current_set = 1;
+ return;
+ }
++#endif
+
+ #if !USE_SCANCODE_SET
+ ps2_state.current_set = 1;
+ return;
+-#else
++#endif
+
++#if defined (GRUB_MACHINE_COREBOOT)
++ /* enable translation */
++ grub_keyboard_controller_write (grub_keyboard_controller_orig
++ & ~KEYBOARD_AT_DISABLE);
++#else
++ /* if not coreboot, disable translation and try mode 2 first, before 1 */
+ grub_keyboard_controller_write (grub_keyboard_controller_orig
+ & ~KEYBOARD_AT_TRANSLATE
+ & ~KEYBOARD_AT_DISABLE);
++#endif
+
+ keyboard_controller_wait_until_ready ();
+ grub_outb (KEYBOARD_COMMAND_ENABLE, KEYBOARD_REG_DATA);
+-
+ write_mode (2);
++
++#if defined (GRUB_MACHINE_COREBOOT)
++ /* mode 2 with translation, so make grub treat as set 1 */
++ ps2_state.current_set = 1;
++#else
++ /* if not coreboot, translation isn't set; test 2 and fall back to 1 */
+ ps2_state.current_set = query_mode ();
+ grub_dprintf ("atkeyb", "returned set %d\n", ps2_state.current_set);
+ if (ps2_state.current_set == 2)
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch b/config/grub/nvme/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch
new file mode 100644
index 00000000..fbef86a4
--- /dev/null
+++ b/config/grub/nvme/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch
@@ -0,0 +1,38 @@
+From 0a6abeb40ac4284fbff6ef5958989d561b6290a7 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Tue, 31 Oct 2023 10:33:28 +0000
+Subject: [PATCH 1/1] keylayouts: don't print "Unknown key" message
+
+on keyboards with stuck keys, this results in GRUB just
+spewing it repeatedly, preventing use of GRUB.
+
+in such cases, it's still possible to use the keyboard,
+and we should let the user at least boot.
+
+it often appears when people plug in faulty usb keyboards,
+but can appear for laptop keyboards too; one of my e6400
+has stuck keys.
+
+with this patch, grub should be a bit more reliable in
+terms of user experience, when the keyboard is faulty.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ grub-core/commands/keylayouts.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/grub-core/commands/keylayouts.c b/grub-core/commands/keylayouts.c
+index aa3ba34f2..445fa0601 100644
+--- a/grub-core/commands/keylayouts.c
++++ b/grub-core/commands/keylayouts.c
+@@ -174,7 +174,6 @@ grub_term_map_key (grub_keyboard_key_t code, int status)
+ key = map_key_core (code, status, &alt_gr_consumed);
+
+ if (key == 0 || key == GRUB_TERM_SHIFT) {
+- grub_printf ("Unknown key 0x%x detected\n", code);
+ return GRUB_TERM_NO_KEY;
+ }
+
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch b/config/grub/nvme/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch
new file mode 100644
index 00000000..25091d16
--- /dev/null
+++ b/config/grub/nvme/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch
@@ -0,0 +1,102 @@
+From 9e7a651a0f15f2e9dec65a77765c3c4fd97b4165 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 5 Nov 2023 16:14:58 +0000
+Subject: [PATCH 1/1] don't print missing prefix errors on the screen
+
+we do actually set the prefix. this patch modifies
+grub to still set grub_errno and return accordingly,
+so the behaviour is otherwise identical, but it will
+no longer print a warning message on the screen.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ grub-core/commands/keylayouts.c | 2 +-
+ grub-core/commands/loadenv.c | 2 +-
+ grub-core/commands/nativedisk.c | 2 +-
+ grub-core/efiemu/main.c | 3 +--
+ grub-core/font/font.c | 2 +-
+ grub-core/kern/dl.c | 2 +-
+ 6 files changed, 6 insertions(+), 7 deletions(-)
+
+diff --git a/grub-core/commands/keylayouts.c b/grub-core/commands/keylayouts.c
+index 445fa0601..00bcf7025 100644
+--- a/grub-core/commands/keylayouts.c
++++ b/grub-core/commands/keylayouts.c
+@@ -211,7 +211,7 @@ grub_cmd_keymap (struct grub_command *cmd __attribute__ ((unused)),
+ {
+ const char *prefix = grub_env_get ("prefix");
+ if (!prefix)
+- return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("variable `%s' isn't set"), "prefix");
++ return (grub_errno = GRUB_ERR_BAD_ARGUMENT);
+ filename = grub_xasprintf ("%s/layouts/%s.gkb", prefix, argv[0]);
+ if (!filename)
+ return grub_errno;
+diff --git a/grub-core/commands/loadenv.c b/grub-core/commands/loadenv.c
+index 166445849..699b39bfa 100644
+--- a/grub-core/commands/loadenv.c
++++ b/grub-core/commands/loadenv.c
+@@ -58,7 +58,7 @@ open_envblk_file (char *filename,
+ prefix = grub_env_get ("prefix");
+ if (! prefix)
+ {
+- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix");
++ grub_errno = GRUB_ERR_FILE_NOT_FOUND;
+ return 0;
+ }
+
+diff --git a/grub-core/commands/nativedisk.c b/grub-core/commands/nativedisk.c
+index 580c8d3b0..6806bff9c 100644
+--- a/grub-core/commands/nativedisk.c
++++ b/grub-core/commands/nativedisk.c
+@@ -186,7 +186,7 @@ grub_cmd_nativedisk (grub_command_t cmd __attribute__ ((unused)),
+ prefix = grub_env_get ("prefix");
+
+ if (! prefix)
+- return grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix");
++ return (grub_errno = GRUB_ERR_FILE_NOT_FOUND);
+
+ if (prefix)
+ path_prefix = (prefix[0] == '(') ? grub_strchr (prefix, ')') : NULL;
+diff --git a/grub-core/efiemu/main.c b/grub-core/efiemu/main.c
+index e7037f4ed..e5d4dbff1 100644
+--- a/grub-core/efiemu/main.c
++++ b/grub-core/efiemu/main.c
+@@ -231,8 +231,7 @@ grub_efiemu_autocore (void)
+ prefix = grub_env_get ("prefix");
+
+ if (! prefix)
+- return grub_error (GRUB_ERR_FILE_NOT_FOUND,
+- N_("variable `%s' isn't set"), "prefix");
++ return (grub_errno = GRUB_ERR_FILE_NOT_FOUND);
+
+ suffix = grub_efiemu_get_default_core_name ();
+
+diff --git a/grub-core/font/font.c b/grub-core/font/font.c
+index 18de52562..2a0fea6c8 100644
+--- a/grub-core/font/font.c
++++ b/grub-core/font/font.c
+@@ -461,7 +461,7 @@ grub_font_load (const char *filename)
+
+ if (!prefix)
+ {
+- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix");
++ grub_errno = GRUB_ERR_FILE_NOT_FOUND;
+ goto fail;
+ }
+ file = try_open_from_prefix (prefix, filename);
+diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c
+index 4011e2d15..af3bd00d0 100644
+--- a/grub-core/kern/dl.c
++++ b/grub-core/kern/dl.c
+@@ -758,7 +758,7 @@ grub_dl_load (const char *name)
+ return 0;
+
+ if (! grub_dl_dir) {
+- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix");
++ grub_errno = GRUB_ERR_FILE_NOT_FOUND;
+ return 0;
+ }
+
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch b/config/grub/nvme/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch
new file mode 100644
index 00000000..f4cf939e
--- /dev/null
+++ b/config/grub/nvme/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch
@@ -0,0 +1,34 @@
+From 6237c5762edccc1e1fa4746b1d4aa5e8d81e4883 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 5 Nov 2023 16:36:22 +0000
+Subject: [PATCH 1/1] don't print error if module not found
+
+still set grub_errno accordingly, and otherwise
+behave the same. in libreboot, we remove a lot of
+modules but then rely on loading a grub.cfg
+provided by a distro; in almost all cases that works,
+but also in almost all cases, that will try to load
+a module we don't actually need, but then it prints
+a message. this can annoy some users, so silence it.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ grub-core/kern/dl.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c
+index af3bd00d0..21d0cedb1 100644
+--- a/grub-core/kern/dl.c
++++ b/grub-core/kern/dl.c
+@@ -486,7 +486,7 @@ grub_dl_resolve_name (grub_dl_t mod, Elf_Ehdr *e)
+
+ s = grub_dl_find_section (e, ".modname");
+ if (!s)
+- return grub_error (GRUB_ERR_BAD_MODULE, "no module name found");
++ return (grub_errno = GRUB_ERR_BAD_MODULE);
+
+ mod->name = grub_strdup ((char *) e + s->sh_offset);
+ if (! mod->name)
+--
+2.39.2
+
diff --git a/config/grub/nvme/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch b/config/grub/nvme/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch
new file mode 100644
index 00000000..25221c9c
--- /dev/null
+++ b/config/grub/nvme/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch
@@ -0,0 +1,31 @@
+From e5b7ec81421487e71bcaf8b6b5a27f3649a62753 Mon Sep 17 00:00:00 2001
+From: Leah Rowe <leah@libreboot.org>
+Date: Sun, 5 Nov 2023 17:25:20 +0000
+Subject: [PATCH 1/1] don't print empty error messages
+
+this is part two of the quest to kill the prefix
+error message. after i disabled prefix-related
+messages, it still printed "error: ." on screen.
+
+Signed-off-by: Leah Rowe <leah@libreboot.org>
+---
+ grub-core/kern/err.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/grub-core/kern/err.c b/grub-core/kern/err.c
+index 53c734de7..7cac53983 100644
+--- a/grub-core/kern/err.c
++++ b/grub-core/kern/err.c
+@@ -107,7 +107,8 @@ grub_print_error (void)
+ {
+ if (grub_errno != GRUB_ERR_NONE)
+ {
+- grub_err_printf (_("error: %s.\n"), grub_errmsg);
++ if (grub_strlen(grub_errmsg) > 0)
++ grub_err_printf (_("error: %s.\n"), grub_errmsg);
+ grub_err_printed_errors++;
+ }
+ }
+--
+2.39.2
+
diff --git a/config/grub/default/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch b/config/grub/nvme/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch
index 4345ebae..4345ebae 100644
--- a/config/grub/default/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch
+++ b/config/grub/nvme/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch
diff --git a/config/grub/nvme/target.cfg b/config/grub/nvme/target.cfg
new file mode 100644
index 00000000..a85c97f5
--- /dev/null
+++ b/config/grub/nvme/target.cfg
@@ -0,0 +1,5 @@
+tree="nvme"
+rev="8719cc2040368d43ab2de0b6e1b850b2c9cfc5b7"
+bootstrapargs="--gnulib-srcdir=gnulib/ --no-git"
+autoconfargs="--with-platform=coreboot --disable-werror"
+makeargs="FS_PAYLOAD_MODULES=\"\""