| Age | Commit message (Collapse) | Author |
|---|
|
we currently distinguish, by virtue of logic, multi-
and single-tree projects. this introduces a lot of
complexity, so the following patch has removed this
distinction. all single-tree projects are now multi
tree, but with only one tree.
other design changes:
config/git removed. rev/tree now handled with mkhelper
and target configs. this allows per-tree remote handling,
so we could (for example) add the mrchromebox coreboot
fork easily, for specific chromebook models.
config/project is now config/module/project. this
cleans up the main config/ directory.
cfgname variable: .config no longer hardcoded when
doing configs in projects. it is configurable with
this variable. if unset, the previous .cfg is used
noconfig variable: set this in target/mkhelper
configs, and config/module/project/tree/config/ is
unused; instead, make is called without config copying.
a "noconfig" placeholder is used. this enables cleaner
usage of previously single-tree projects in the new
multi-tree-only structure.
cfgvars: variables reinitialised in project config are
cleaned more reliably. in particular, several variables
e.g. autogenargs were not being reset between projects,
although the autogenargs variable is currently unused.
general cleanup has been conducted across the build
system, as part of this redesign. several parts of the
build system more over-engineered as a result of the
previous design, and the new design enabled a severe
reduction in sloccount (75 lines reduced in lbmk).
yes, this change *adds features* but there are fewer
lines of code than before. this is the best kind of
change. way better than the 3-line-diff. yes.
rev= and tree= are set more centrally in configs. the
mkhelper config can be used to set url/url_bkup, but
individual trees can override them.
configs have been cleaned up, with several variables
now much more heavily centralised. config/git/ was
used before to first download the bare repository, and
then the real clone was made with patches. this allows
git repositories to be cached for future re-builds.
with config/git/ gone, the download logic for projects
is more centrally implemented. a separate call to ./mk -f
is no longer performed, and in fact ./mk -f never needs
to be used anymore as a result. ./mk -f now is basically
the same thing as -b, just without any action performed.
this change will allow rapid expansion of the libreboot
project. i want to add hundreds of chromebooks to the
project, using mrchromebox, but the previous design did
not permit this. this change means that i can easily have
unlimited upstreams per project. coreboot will, in some
follow-up changes, have the following upstreams:
coreboot/default: coreboot.org
coreboot/fam15h: 15h.org fork
coreboot/chromebook: mrchromebox fork
this can now be done freely without massive changes to
the build system. under the previous design, i worked on
a now-abandoned patch to do N remotes per project, reading
repo links from a file. this meant that i'd have coreboot.org
first (main and backup), then mrchromebox. this meant that
lbmk would failover through to mrchromebox, wasting time
for the user.
this new design is much cleaner, and will enable the
project to be maintained much more easily.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
and add a line break where it is used
now it is essentially a macro of sorts, used in
terms of syntax, to mean the same as:
if [ "$dry" != ":" ]; do
thing
fi
in this case, we say:
$if_not_dry_build \
thing
yes. macros in sh are a thing.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Instead of calling fe_, prefix x_ as indicated.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
sh macros ftw
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove it from mkhelper files, because rom.sh doesn't
initialise any variables globally, except one that
never changes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Many users report bugs, so I'm reverting lbmk back to only
supporting the rp2040 dongles for the time being. The
documentation will be updated to reflect this.
Pico2 support will be re-added at a later date, once more
testing has been done, and fixes made if necessary.
|
|
instead of running pwd all the time, run it once in lib.sh,
and export PWD.
for lbmk-specific use of PWD, use xbmkpwd, which contains
the value of PWD as was set by the pwd utility in lib.sh.
many parts of lbmk rely on pwd, and it *must* be correct.
this change adds basic error handling, since pwd can in
fact return errors in some cases.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
PWD could be anything, if the user manually exported
it before running lbmk.
always run pwd instead, to get the real string.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We were previously not handling picotool at all, and
pico-sdk would download picotool itself, at build time.
This means that the source archive, if created, would
not contain picotool. While not strictly required, for
complete corresponding source, since it's a toolchain
and not the actual pico-serprog firmware, it is my policy
that releases must include full corresponding source code,
when it is feasible to do so.
I must say, I intensely dislike cmake, with such burning
passion; I am thoroughly displeased by how hacky this is,
but it works and now nothing is in my way for a Libreboot
20241206 rev8 release!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Previously serprog_rp2040, but we now also support
the RP2530 boards.
Therefore, serprog_pico is a nice generic name. The
directory on release archives will now be serprog_pico
instead of serprog_rp2040; it will contain serprog images
for both RP2040 and RP2530 devices.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
move the coreboot-specific includes into mkhelper.cfg
for that project.
on some projects, we need variables from mkhelper.cfg
to be global, so I was including serprog and coreboot
mkhelper.cfg files in this script.
instead, set a new variable "mkhelpercfg" pointing to
the config file. if it doesn't exist, create and then
point to a temporary (empty) mkhelper.cfg file.
the rom.sh include has been moved to coreboot mkhelper.cfg
The only remaining project-specific logic, in this trees
script, is now the coreboot crossgcc handling, but this
needs to be there as it's also used to build U-Boot.
The way this now works, certain includes are done twice.
For example, include/rom.sh will be included once globally,
outside of main(), and then again in configure_project().
This means that certain functions will be defined twice.
I'm uncertain if shell has anything equivalent to an ifdef
guard as in C, but we actually want this here anyway, and
it shouldn't cause any problems. It's a bit of a hack, but
otherwise results in much cleaner code.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
stub it from the trees script. the way it works now,
there is less code in the build system.
./build roms
this is no longer a thing
./build roms serprog
this is also no longer a thing. instead, do:
./update trees -b coreboot targetnamehere
./update trees -b pico-serprog
./update trees -b stm32-vserprog
the old commands still works, which causes the new
commands to run
coreboot roms now appear in elf/, not bin/, as before,
but those images now contain payloads.
NOTE: to contradict the above: ./build roms is no
longer a thing, in that it's now deprecated, but
backward compatibility is present for now. it will
be removed in a future release.
./build roms list also still works! it will do:
./update trees -b coreboot list
also:
./update trees -b grub list
this is now possible too
if a target "list" is provided, for multi-tree sources,
the targets are shown.
there is another difference: seagrub roms are now seagrub_,
instead of seabios_withgrub.
seabios-only roms are no longer provided, where grub is also
enabled; only seagrub is used. the user can easily remove
the bootorder file, if they want seabios to not try grub first.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
