summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-26update/trees: reset xtree/tree_depend before buildLeah Rowe
in some cases, the build system was needlessly, and sometimes erroneously, creating crossgcc symlinks, which then caused an issue, namely: in lbmk release builds, dell e6400 is build before fam15h boards, and it sets xtree, but fam15h_rdimm doesn't, and later this would cause fam15h_rdimm boards to use xtree="default" (because they don't set xtree), causing the newer toolchain to be used on coreboot 4.11. this patch fixes the issue. quite a simple problem, actually. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25update config/git/docs to latest revsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25dell/e6*30: use generic PS2K/PS2M EISAID stringsLeah Rowe
CONFIG_PS2M_EISAID. this is a a string used for the identifier on the mouse, in ACPI. CONFIG_PS2K_EISAID this is used for the keyboard. IASL comes back with this build error: dsdt.asl 1884: Name(_HID, EISAID("DLLK0534")) Error 6045 - ^ EISAID string must be of the form "UUUXXXX" (3 uppercase, 4 hex digits) (DLLK0534) Change DLLK0534 back to PNP0303 and change DLL0534 back to PNP0F13. These are generic identifiers for PS/2 keyboard and mouse. Any generic driver will work with the onboard mouse/keyboard on these machines. They do not need to be changed. These are the default values anyway. Just leave them explicitly defined to the default values, for now; if these options are not set, coreboot will default to these values. This shouldn't break anything for the users. I've reported this to Nicholas Chin, author of those patches. Libreboot imported the new versions of E6430/E6530 board patches in the coreboot revision update, but the new (technically correct) values broke IASL, so I've decided to use the old values for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25update coreboot/dell to same rev as defaultLeah Rowe
re-use the same patches, and drop the same patches. this tree uses hell's special ddr2 fix, which we apply for the dell latitude e6400. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25coreboot/default: update coreboot to January 2024Leah Rowe
Base revision changed to: commit b6cbfa977f63d57d5d6b9e9f7c1cef30162f575a Author: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Date: Fri Jan 5 16:48:17 2024 +0800 mb/google/dedede/var/metaknight:Add fw_config probe for multi codec and amplifier Of note: Several out-of-tree ports have been adjusted to use the new SPD config style, where it is defined in devicetree. I manually updated the E6530 patch myself, based on the update that Nicholas did on E6430 (Nicholas will later update the E6530 patch himself, and I'll re-merge the patch). Several upstream patches now exist in this revision, that we were able to remove from lbmk. The heap size patch was reverted upstream, as we did, but see: https://review.coreboot.org/c/coreboot/+/80023 https://review.coreboot.org/c/coreboot/+/79525 Although we still disable the TSEG Stage Cache, ivy/sandy/haswell should be reliable on S3 now (leaving TSEG Stage Cache disabled, for now, anyway). Also included in upstream now: commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94 Author: Bill Xie <persmule@hardenedlinux.org> Date: Sat Oct 7 01:32:51 2023 +0800 drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume Further patches from upstream: commit 432e92688eca0e85cbaebca3232f65936b305a98 Author: Bill Xie <persmule@hardenedlinux.org> Date: Fri Nov 3 12:34:01 2023 +0800 drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum This should fix S3 on GM45 thinkpads. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-23script/vendor/inject: remove erroneous checkLeah Rowe
the boarddir variable is only set *after* detect_board is run, and is in fact checked after that. this check, removed by this patch, is too early and causes lbmk to exit with error states. this patch fixes the error. the error was that lbmk was then searching for a file that is at an empty path. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21fam15h boards: define xtreeLeah Rowe
these should be using the rdimm tree for crossgcc, so define it explicitly. the build system creates a symlink too, but it's still best that we use it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21coreboot/fam15h_udimm: define xtreeLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21don't download projects on release archivesLeah Rowe
the changelog file is only present in releases, so use the presence of this file for the test. someone who wants to fetch projects within a release archive can simply use the git repo, or delete the file. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21update/release: generate changelogsLeah Rowe
use the git log, as follows: git log --graph --pretty=format:'%Cred%h%Creset %s %Creset' --abbrev-commit this creates a nice, uniform list of changes. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21fix amd mainboard configsLeah Rowe
in a build test, canoeboot 0.1 builds, but master doesn't, and neither does lbmk. i changed a few of them when doing the crossgcc build optimisation patches. i'm just copying the configs from there. unlike in the canoeboot version of this patch, i've re-enabled microcode updates in these lbmk configs. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21git.sh: fix bad call to ./updateLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21git.sh: support downloading dependency treesLeah Rowe
a tree can specify: tree_depend="treename" this will make the other tree be downloaded. this is used for coreboot trees, to ensure that dependency trees are downloaded, because trees can now re-use crossgcc from other trees. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21re-use crossgcc builds on the coreboot treesLeah Rowe
don't build crossgcc twice, especially if two coreboot trees use the same revision! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21allow multitree projects to define xgcc treeLeah Rowe
let them specific it, rather than falling back to coreboot/default (can also be used for coreboot boards) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21u-boot: don't define xarch in defaultLeah Rowe
it's only needed for each board Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21coreboot/*/target.cfg: don't define xarchLeah Rowe
it's defined per board Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21grub/target.cfg: move --disable-werrorLeah Rowe
i meant to push it in configure args, not bootstrap Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21coreboot/fam15h: disable -Werror on binutils 2.32Leah Rowe
work around newer build issues, on very bleeding edge distros (disable treating warnings as errors) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21grub: use --disable-werror on ./configureLeah Rowe
work around build issues on very bleeding edge distros Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-20dependencies/arch: add pandoc to dependenciesLeah Rowe
pandoc is required by the grub build system, when running autoconf at the start of the build process Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-18GRUB: insert only 1 keymap per board, in cbfsLeah Rowe
There is no need to add multiple keymap files, because GRUB can load keymaps from CBFS. The current build logic is designed to avoid building multiple GRUB binaries, which are expensive computationally because each one would then have to be compressed for each board. This patch provides the best of both worlds: less space used in flash like in the old lbmk design (1 keymap per board), but retaining the current build speeds and therefore not re-introducing the slowness of lbmk's previous GRUB build logic. The grub.cfg file has been modified, accordingly. It now only loads a keymap.gkb file from CBFS, by default. It does this, only if that file exists; if not, GRUB already defaults to US Qwerty layout anyway. ALSO: compress all keymap gkb files with xz -6 GRUB automatically decompresses files when accessed. This results in about 2KB of flash space saved in CBFS. Here is real-world data, showing the increased flash space: < fallback/payload 0x3eb80 simple elf 548821 none < keymap.cfg 0xc4bc0 raw 16 none < (empty) 0xc4c00 null 11633316 none --- > fallback/payload 0x3eb80 simple elf 546787 none > keymap.gkb 0xc43c0 raw 344 none > (empty) 0xc4540 null 11635044 none This was taken by diffing the cbfstool "print" output, both before and after. The *after* result is with this change. 11633316. In this example, 1728 bytes have been saved. Therefore, with compression taken into account, this patch saves about 1.7KB of space in CBFS. This change means that lbmk can now scale to support hundreds of keymaps, without increasing the amount of flash space used, in each given image. Since the keymap files are compressed in lbmk.git, in advance, we spend no additional time on compression at build time. The resulting change in build speed in negligible. Adding your own keymap.gkb file was already possible, for changing the keymap in libreboot images, if you didn't want to change the memdisk (and thus re-compile grub.elf). Now, this is the default behaviour, and the only way to do it. It's much more efficient. The original keymap files can be restored, by running unxz. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-17build/roms: err if -k layout doesn't existLeah Rowe
if the user defines a layout that doesn't exist, throw an error in lbmk. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-17build/roms: regression fix: uninitialised variableLeah Rowe
the "kmapdir" variable was removed in an earlier audit, but was overlooked for -k because that option was untested. rather than initialise the variable, re-use grubcfgsdir. this fix enables e.g. "-k usdvorak" to work again. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-14Merge pull request 'config/dependencies/trisquel: replaced package from ↵Leah Rowe
ttf-unifont to fonts-unifont' (#177) from goodspeed/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/177
2024-01-14config/dependencies/trisquel: replaced package from ttf-unifont to fonts-unifontWilliam Goodspeed
ttf-unifont no longer exists on trisquel aramo. --- Package: fonts-unifont Breaks: ttf-unifont (<< 1:13.0.02-1) Replaces: ttf-unifont (<< 1:13.0.02-1) --- Signed-off-by: William Goodspeed <goodspeed@anche.no>
2024-01-12REMOVE MAINBOARD: lenovo x201Leah Rowe
with neutered ME, fan control fails. while there are ways to mitigate it, many users will not, and will likely see their system overheat, which is very dangerous. this bug (failed fan control on neutered ME) only affects arrandale machines such as lenovo x201. the newer machines are not affected by this. other arrandale machines will probably not be added to libreboot because of this, or they will be subject to further testing. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-10NEW MAINBOARD: HP EliteBook 820 G2Leah Rowe
This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-06Merge pull request 'Dell-flash-unlock README updates' (#175) from ↵Leah Rowe
nic3-14159/lbmk:dell-flash-unlock-updates into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/175
2024-01-05README.md: Add Latitude E7270 as supportedNicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-01-05README.md: Add notes about iopl and AC adapter requirementNicholas Chin
In order for the EC to maintain the state of whether or not to set the flash descriptor override across a power cycle, the AC adapter must be connected, as the system leaves the voltage rail that the EC uses powered under this condition. Without this, the utility may fail, continually asking the user to power off and on. On Linux, CONFIG_X86_IOPL_IOPERM must be set for the kernel, or else the iopl call will error with "Function not implemented". Make a note of this in case a user runs into this issue. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-01-05README.md: List E6520, E5530, and M4800 as supportedNicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-01-01build/roms: tidy up payload configuration handlingLeah Rowe
the eval for loop is overkill Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01build/roms: remove unused variableLeah Rowe
the kmapdir variable is only used once, and just the string makes it obvious what this is for Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01build/roms: don't needlessly re-build grub.elfLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01build/roms: create elf/grub if non-existentLeah Rowe
i overlooked this during previous re-factoring Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.cfg: simplified revision checkingLeah Rowe
it only needs to be checked before git reset Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01fix oversight in previous commitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01build/roms: rename more functions for clarityLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01build/roms: rename payload functions for clarityLeah Rowe
they are functions that build payloads, so name them as such. don't call them "dependencies" functions Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01build/roms: simplify seabios dependency checkLeah Rowe
the update/trees script checks this binary itself, before deciding whether to recompile/compile, so we don't need to do such checks here. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01build/roms: simplify grub dependency checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01add copyright 2024 leah rowe to edited filesLeah Rowe
i forgot to add 2024 on the copyright years, for my copyright files that i edited on 1 january 2024 Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: simplify submodule handling in git_prepLeah Rowe
u-boot doesn't use submodules, so there's no point in checking for it. now we can do with just one call to the git submodule command, for simplicity also, general code cleanup in this file (minor code formatting improvements) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: further simplify git_prepLeah Rowe
the directory is checked for deletion, but it's already checked before download, to see whether it already exists. lbmk already exits with zero status if the directory exists, so the check is pointless (in this function) also, general code style/formatting cleanup Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: unify am/submodule and tree copyingLeah Rowe
do it all in a single function! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh cleanup: git am handling (remove patchfail)Leah Rowe
the patchfail variable was only needed in the old design, where git am was being handled inside a subshell, and also when we did it directly in the target directory without using a temporary directory. with the current design, we can just call err() and ditch the tmp repo Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: clean up handling of tmp_git_dirLeah Rowe
delete it once once, and delete it much sooner, right at the start of script/update/trees main() Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: fix regression: patches before submodulseLeah Rowe
there isn't really a problem right now, but a desired and implemented behavioural change was that patches are to be applied *before* updating submodules. well, the previous commit reversed this change, under certain conditions, such that submodules were applied first. this patch fixes it, so that patches are done first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: clean up git submodule/am handlingLeah Rowe
unify all of the logic, where git am and submodule is handled Signed-off-by: Leah Rowe <leah@libreboot.org>