diff options
Diffstat (limited to 'script/roms')
| -rwxr-xr-x | script/roms | 475 |
1 files changed, 0 insertions, 475 deletions
diff --git a/script/roms b/script/roms deleted file mode 100755 index ac3d28ef..00000000 --- a/script/roms +++ /dev/null @@ -1,475 +0,0 @@ -#!/usr/bin/env sh -# SPDX-License-Identifier: GPL-3.0-or-later -# SPDX-FileCopyrightText: 2014-2016,2020,2021,2023,2024 Leah Rowe <leah@libreboot.org> -# SPDX-FileCopyrightText: 2021,2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> -# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com> -# SPDX-FileCopyrightText: 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com> -# SPDX-FileCopyrightText: 2023 Riku Viitanen <riku.viitanen@protonmail.com> - -set -u -e - -. "include/option.sh" - -seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin" -grub_background="background1280x800.png" -grubelf="elf/grub/grub.elf" -cfgsdir="config/coreboot" -pico_src_dir="src/pico-serprog" -pico_sdk_dir="src/pico-sdk" -stm32_src_dir="src/stm32-vserprog" - -# Disable all payloads by default. -# target.cfg files have to specifically enable [a] payload(s) -pv="payload_grub payload_grub_withseabios payload_seabios payload_memtest t" -pv="${pv} payload_seabios_withgrub payload_seabios_grubonly payload_uboot memtest_bin" -v="romdir cbrom initmode displaymode cbcfg targetdir tree keymaps release" -v="${v} grub_timeout ubdir board grub_scan_disk uboot_config" -eval "$(setvars "n" ${pv} serprog)" -eval "$(setvars "" ${v} boards _displaymode _payload _keyboard all targets \ - serprog_boards_dir)" - -main() -{ - while [ $# -gt 0 ]; do - case ${1} in - list) - x_ items config/coreboot - return 0 ;; - serprog) - serprog="y" - shift 1; break ;; - -d) _displaymode="${2}" ;; - -p) _payload="${2}" ;; - -k) _keyboard="${2}" ;; - *) - [ "${1}" = "all" ] && all="y" - boards="${1} ${boards}" - shift && continue ;; - esac - shift 2 - done - - if [ "$serprog" = "y" ]; then - handle_serprog $@ - return 0 - else - [ "${all}" != "y" ] || boards=$(items config/coreboot) || \ - $err "Cannot generate list of boards for building" - for x in ${boards}; do - handle_coreboot_target "$x" - done - fi - - bstr="directories" - [ "$lbmk_release" = "y" ] && bstr="tarballs" - - [ -z "${targets}" ] && $err "No ROM images were compiled" - printf "\nROM images available in these %s:\n" "$bstr" - eval "printf \"${targets}\"" - printf "^^ ROM images available in these %s.\n\n" "$bstr" - - [ "$lbmk_release" = "y" ] && \ - printf "Always run the inject command on release images!\n" - printf "DO NOT flash images from elf/ - please use bin/ instead.\n" -} - -handle_serprog() -{ - [ -z "${1+x}" ] && $err "bad command. Check $projectname docs." - [ "$1" != "rp2040" ] && [ "$1" != "stm32" ] && $err "bad command" - if [ "${1}" = "rp2040" ]; then - serprog_boards_dir=${pico_sdk_dir}/src/boards/include/boards - [ -d "$pico_src_dir" ] || x_ ./update trees -f "pico-serprog" - elif [ "${1}" = "stm32" ]; then - serprog_boards_dir=${stm32_src_dir}/boards - [ -d "$stm32_src_dir" ] || x_ ./update trees -f "stm32-vserprog" - fi - x_ mkdir -p "bin/serprog_${1}" - - if [ $# -gt 1 ] && [ "${2}" = "list" ]; then - print_serprog_boards ${serprog_boards_dir} - return 0 - elif [ $# -gt 1 ]; then - build_${1}_rom "${2}" - else - printf "Building all serprog targets\n" - list_serprog_boards "${serprog_boards_dir}" | \ - while read -r board; do - build_${1}_rom "${board}" - done - fi - - [ "$lbmk_release" = "y" ] && mktar_release "bin/serprog_$1"; return 0 -} - -build_rp2040_rom() -{ - board=${1} - printf "Building pico-serprog for %s\n" "${board}" - x_ cmake -DPICO_BOARD="$board" -DPICO_SDK_PATH="$pico_sdk_dir" \ - -B "${pico_src_dir}/build" "${pico_src_dir}" - x_ cmake --build "${pico_src_dir}/build" - x_ mv ${pico_src_dir}/build/pico_serprog.uf2 \ - bin/serprog_rp2040/serprog_${board}.uf2 - printf "output to bin/serprog_rp2040/serprog_%s.uf2\n" "$board" -} - -build_stm32_rom() -{ - board=${1} - printf "Building stm32-vserprog for %s\n" "${board}" - x_ make -C $stm32_src_dir libopencm3-just-make BOARD=$board - x_ make -C ${stm32_src_dir} BOARD=${board} - x_ mv ${stm32_src_dir}/stm32-vserprog.hex \ - bin/serprog_stm32/serprog_${board}.hex - printf "output to bin/serprog_stm32/serprog_%s.hex\n" "$board" -} - -print_serprog_boards() -{ - printf "Available boards:\n" - list_serprog_boards "${1}" -} - -list_serprog_boards() -{ - basename -a -s .h "${1}/"*.h || $err "list_boards $1: can't list boards" -} - -handle_coreboot_target() -{ - eval "$(setvars "n" ${pv}) $(setvars "" ${v})" - grub_background="background1280x800.png" - board="$1" - - configure_target - [ "$board" = "$tree" ] && return 0 - if [ "$lbmk_release" = "y" ] && [ "$release" = "n" ]; then - printf "Target '%s' disabled for release.\n" "$board" - return 0 - fi - - build_payloads - build_target_mainboard - - [ -d "bin/${board}" ] || return 0 - [ "$lbmk_release" = "y" ] || targets="* bin/${board}\n${targets}" - [ "$lbmk_release" = "y" ] || return 0 - - targets="* bin/${relname}_$board.tar.xz\n$targets" - mktar_release "bin/$board" -} - -configure_target() -{ - targetdir="${cfgsdir}/${board}" - [ -f "${targetdir}/target.cfg" ] || \ - $err "Missing target.cfg for target: ${board}" - - # Override the above defaults using target.cfg - . "${targetdir}/target.cfg" - - [ -z "${grub_scan_disk}" ] && grub_scan_disk="both" - [ "$grub_scan_disk" != "both" ] && [ "$grub_scan_disk" != "ata" ] \ - && [ "${grub_scan_disk}" != "ahci" ] && \ - grub_scan_disk="both" - - [ -z "$tree" ] && $err "$board: tree not defined" - - [ "${payload_memtest}" != "y" ] && payload_memtest="n" - [ "${payload_grub_withseabios}" = "y" ] && payload_grub="y" - [ "${payload_grub_withseabios}" = "y" ] && \ - eval "$(setvars "y" payload_seabios payload_seabios_withgrub)" - [ "$payload_seabios_withgrub" = "y" ] && payload_seabios="y" - [ "$payload_seabios_grubonly" = "y" ] && payload_seabios="y" - [ "$payload_seabios_grubonly" = "y" ] && payload_seabios_withgrub="y" - - # The reverse logic must not be applied. If SeaBIOS-with-GRUB works, - # that doesn't mean GRUB-withSeaBIOS will. For example, the board - # might have a graphics card whose vga rom coreboot doesn't execute - [ "$payload_grub" != "y" ] && [ "$payload_seabios" != "y" ] && \ - [ "${payload_uboot}" != "y" ] && \ - for configfile in "${targetdir}/config/"*; do - [ -e "${configfile}" ] || continue - $err "target '${board}' defines no payload" - done - - [ "$payload_uboot" != "n" ] && [ "$payload_uboot" != "y" ] && \ - payload_uboot="n" - [ "$payload_uboot" = "y" ] && [ -z "$uboot_config" ] && \ - uboot_config="default" - - # Override all payload directives with cmdline args - [ -z "${_payload}" ] && return 0 - printf "setting payload to: %s\n" "${_payload}" - eval "$(setvars "n" payload_grub payload_memtest payload_seabios \ - payload_seabios_withgrub payload_uboot payload_grub_withseabios \ - payload_seabios_grubonly)" - eval "payload_${_payload}=y" -} - -build_payloads() -{ - romdir="bin/${board}" - cbdir="src/coreboot/${board}" - [ "${board}" = "${tree}" ] || cbdir="src/coreboot/${tree}" - cbfstool="cbutils/${tree}/cbfstool" - cbrom="${cbdir}/build/coreboot.rom" - - [ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree - - memtest_bin="memtest86plus/build64/memtest.bin" - [ "${payload_memtest}" != "y" ] || [ -f "src/${memtest_bin}" ] || \ - x_ ./update trees -b memtest86plus - - [ "$payload_seabios" = "y" ] && x_ ./update trees -b seabios - if [ "$payload_grub" = "y" ] || [ "$payload_seabios_withgrub" = "y" ] \ - || [ "$payload_seabios_grubonly" = "y" ]; then build_grub_payload - fi - [ "${payload_uboot}" = "y" ] && build_uboot_payload; return 0 -} - -build_grub_payload() -{ - x_ mkdir -p elf/grub - - for keymapfile in config/grub/keymap/*.gkb; do - [ -f "${keymapfile}" ] || continue - - keymaps="${keymaps} ${keymapfile}" - done - [ -z "$_keyboard" ] || [ -f "$grubcfgsdir/keymap/$_keyboard.gkb" ] || \ - $err "build_grub_payload: $_keyboard layout not defined" - [ -n "$_keyboard" ] && keymaps="${grubcfgsdir}/keymap/${_keyboard}.gkb" - [ -f "$grubelf" ] && return 0 - [ -f "src/grub/grub-mkstandalone" ] || x_ ./update trees -b grub - - ./src/grub/grub-mkstandalone \ - --grub-mkimage="src/grub/grub-mkimage" \ - -O i386-coreboot \ - -o "elf/grub/grub.elf" \ - -d "src/grub/grub-core/" \ - --fonts= --themes= --locales= \ - --modules="${grub_modules}" \ - --install-modules="${grub_install_modules}" \ - "/boot/grub/grub.cfg=${grubcfgsdir}/config/grub_memdisk.cfg" \ - "/boot/grub/grub_default.cfg=${grubcfgsdir}/config/grub.cfg" || \ - $err "could not generate grub.elf" -} - -build_uboot_payload() -{ - x_ ./update trees -b u-boot ${board} - ubdir="elf/u-boot/${board}/${uboot_config}" - ubootelf="${ubdir}/u-boot.elf" - [ ! -f "${ubootelf}" ] && [ -f "${ubdir}/u-boot" ] && \ - ubootelf="${ubdir}/u-boot" - [ -f "${ubootelf}" ] && return 0 - $err "Can't find u-boot build for board, $board"; -} - -build_target_mainboard() -{ - x_ rm -Rf "${romdir}" - - for x in "normal" "vgarom" "libgfxinit"; do - initmode="${x}" - hmode="vesafb" - [ "${initmode}" = "vgarom" ] || hmode="corebootfb" - modes="${hmode} txtmode" - [ -z "${_displaymode}" ] || modes="${_displaymode}" - for y in ${modes}; do - displaymode="${y}" - [ "${initmode}" = "normal" ] && \ - [ "$displaymode" != "txtmode" ] && continue - cbcfg="${targetdir}/config/${initmode}_${displaymode}" - [ "${initmode}" = "normal" ] && cbcfg="${cbcfg%_*}" - build_roms "${cbcfg}" - x_ rm -f "$cbrom" - done - done -} - -# Main ROM building function. This calls all other functions below -build_roms() -{ - cbcfg="${1}" - if [ ! -f "${cbcfg}" ]; then - printf "'%s' does not exist. Skipping build for %s %s %s\n" \ - "$cbcfg" "$board" "$displaymode" "$initmode" 1>&2 - return 0 - fi - - x_ ./update trees -b coreboot ${board} - - _cbrom="elf/coreboot_nopayload_DO_NOT_FLASH" - _cbrom="${_cbrom}/${board}/${initmode}_${displaymode}" - [ "${initmode}" = "normal" ] && \ - _cbrom="${_cbrom%"_${displaymode}"}" - _cbrom="${_cbrom}/coreboot.rom" - cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - x_ cp "${_cbrom}" "${cbrom}" - - [ "${payload_memtest}" != "y" ] || \ - x_ "${cbfstool}" "${cbrom}" add-payload \ - -f "src/${memtest_bin}" -n img/memtest -c lzma - [ "${payload_seabios}" = "y" ] && build_seabios_roms - [ "$payload_grub" != "y" ] || x_ build_grub_roms "$cbrom" "grub" - [ "${payload_uboot}" = "y" ] || return 0 - x_ cp "${_cbrom}" "${cbrom}" - build_uboot_roms -} - -build_seabios_roms() -{ - if [ "${payload_seabios_withgrub}" = "y" ]; then - t=$(mktemp -t coreboot_rom.XXXXXXXXXX) - x_ cp "${cbrom}" "${t}" - x_ build_grub_roms "${t}" "seabios_withgrub" - else - t=$(mkSeabiosRom "${cbrom}" "fallback/payload") || \ - $err "build_seabios_roms: cannot build tmprom" - newrom="${romdir}/seabios_${board}_${initmode}_${displaymode}" - [ "${initmode}" = "normal" ] && newrom="${romdir}/seabios" \ - && newrom="${newrom}_${board}_${initmode}" - x_ moverom "${t}" "${newrom}.rom" - fi - x_ rm -f "${t}" -} - -# Make separate ROM images with GRUB payload, for each supported keymap -build_grub_roms() -{ - tmprom="${1}" - payload1="${2}" # allow values: grub, seabios, seabios_withgrub - - grub_cbfs="fallback/payload" - if [ "$payload1" = "grub" ] && [ "$payload_grub_withseabios" = "y" ] - then - _tmpmvrom=$(mkSeabiosRom "$tmprom" "seabios.elf") || \ - $err "build_grub_roms 1 $board: can't build tmprom" - x_ mv "$_tmpmvrom" "$tmprom" - elif [ "$payload1" != "grub" ] && [ "$payload_seabios_withgrub" = "y" ] - then - grub_cbfs="img/grub2" - _tmpmvrom=$(mkSeabiosRom "$tmprom" fallback/payload) || \ - $err "build_grub_roms 2 $board: can't build tmprom" - x_ mv "$_tmpmvrom" "$tmprom" - fi - - # we only need insert grub.elf once, for each coreboot config: - x_ "${cbfstool}" "${tmprom}" add-payload -f "${grubelf}" \ - -n ${grub_cbfs} -c lzma - - # we only need insert background.png once, for each coreboot config: - if [ "${displaymode}" = "vesafb" ] || \ - [ "${displaymode}" = "corebootfb" ]; then - backgroundfile="config/grub/background/${grub_background}" - "${cbfstool}" "${tmprom}" add -f ${backgroundfile} \ - -n background.png -t raw || \ - $err "insert background, ${backgroundfile}" - fi - - tmpcfg=$(mktemp -t coreboot_rom.XXXXXXXXXX) - printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" >"$tmpcfg" \ - || $err "set grub_scandisk, $grub_scan_disk, $tmpcfg" - [ "${grub_scan_disk}" = "both" ] || \ - x_ "$cbfstool" "$tmprom" add -f "$tmpcfg" -n scan.cfg -t raw - printf "set timeout=%s\n" "${grub_timeout}" > "${tmpcfg}" || \ - $err "set timeout, ${grub_timeout}, ${tmpcfg}" - [ -z "${grub_timeout}" ] || x_ "${cbfstool}" "${tmprom}" add \ - -f "${tmpcfg}" -n timeout.cfg -t raw - x_ rm -f "${tmpcfg}" - - for keymapfile in ${keymaps}; do - [ -f "${keymapfile}" ] || continue - keymap="${keymapfile##*/}" - keymap="${keymap%.gkb}" - - tmpgrubrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - x_ cp "${tmprom}" "${tmpgrubrom}" - x_ "$cbfstool" "$tmpgrubrom" add -f "$keymapfile" \ - -n keymap.gkb -t raw - - newrom="${romdir}/${payload1}_${board}_${initmode}_" - newrom="${newrom}${displaymode}_${keymap}.rom" - [ "${initmode}" = "normal" ] && \ - newrom="${romdir}/${payload1}_${board}_" && \ - newrom="${newrom}${initmode}_${keymap}.rom" - x_ moverom "${tmpgrubrom}" "${newrom}" - if [ "${payload_seabios_grubonly}" = "y" ]; then - x_ "$cbfstool" "$tmpgrubrom" add \ - -f "config/grub/bootorder" -n bootorder -t raw - x_ moverom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom" - x_ "$cbfstool" "$tmpgrubrom" add-int -i 0 \ - -n etc/show-boot-menu - x_ moverom "$tmpgrubrom" "${newrom%.rom}_grubonly.rom" - fi - x_ rm -f "${tmpgrubrom}" - done -} - -# make a rom in /tmp/ and then print the path of that ROM -mkSeabiosRom() { - _cbrom="${1}" # rom to insert seabios in. will not be touched - # (a tmpfile will be made instead) - _seabios_cbfs_path="${2}" # e.g. fallback/payload - _seabioself="elf/seabios/default/${initmode}/bios.bin.elf" - tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX) - - x_ cp "${_cbrom}" "${tmprom}" - x_ "$cbfstool" "$tmprom" add-payload -f "$_seabioself" \ - -n "${_seabios_cbfs_path}" -c lzma - x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup - - z="2"; [ "$initmode" = "vgarom" ] && z="0" - x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec - x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum - [ "$initmode" != "libgfxinit" ] || \ - x_ "$cbfstool" "$tmprom" add -f "$seavgabiosrom" \ - -n vgaroms/seavgabios.bin -t raw - - printf "%s\n" "${tmprom}" -} - -build_uboot_roms() -{ - tmprom=$(mkUbootRom "${cbrom}" "fallback/payload") || \ - $err "build_uboot_roms $board: could not create tmprom" - newrom="${romdir}/uboot_payload_${board}_${initmode}_${displaymode}.rom" - x_ moverom "${tmprom}" "${newrom}" - x_ rm -f "${tmprom}" -} - -# make a rom in /tmp/ and then print the path of that ROM -mkUbootRom() { - _cbrom="${1}" - _uboot_cbfs_path="${2}" - - _ubdir="elf/u-boot/${board}/${uboot_config}" - _ubootelf="${_ubdir}/u-boot.elf" - [ -f "${_ubootelf}" ] || _ubootelf="${_ubdir}/u-boot" - [ -f "$_ubootelf" ] || $err "mkUbootRom: $board: cant find u-boot" - - tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX) - - x_ cp "${_cbrom}" "${tmprom}" - x_ "$cbfstool" "$tmprom" add-payload -f "$_ubootelf" \ - -n "${_uboot_cbfs_path}" -c lzma - - printf "%s\n" "${tmprom}" -} - -moverom() -{ - printf "Creating target image: %s\n" "$2" - - x_ mkdir -p "${2%/*}" - x_ cp "$1" "$2" - [ "$lbmk_release" = "y" ] || return 0 - - mksha512sum "${2}" "vendorhashes" - x_ ./vendor inject -r "${2}" -b "$board" -n nuke -} - -main $@ |