summaryrefslogtreecommitdiff
path: root/config/coreboot/haswell/patches/0011-haswell-NRI-Add-RcvEn-training.patch
diff options
context:
space:
mode:
Diffstat (limited to 'config/coreboot/haswell/patches/0011-haswell-NRI-Add-RcvEn-training.patch')
-rw-r--r--config/coreboot/haswell/patches/0011-haswell-NRI-Add-RcvEn-training.patch708
1 files changed, 0 insertions, 708 deletions
diff --git a/config/coreboot/haswell/patches/0011-haswell-NRI-Add-RcvEn-training.patch b/config/coreboot/haswell/patches/0011-haswell-NRI-Add-RcvEn-training.patch
deleted file mode 100644
index 4815be9a..00000000
--- a/config/coreboot/haswell/patches/0011-haswell-NRI-Add-RcvEn-training.patch
+++ /dev/null
@@ -1,708 +0,0 @@
-From 4254a9ff03658d7a6f1a4e32cfe4c65dbfc072f8 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Sun, 8 May 2022 00:05:41 +0200
-Subject: [PATCH 11/20] haswell NRI: Add RcvEn training
-
-Implement the RcvEn (Receive Enable) calibration procedure.
-
-Change-Id: Ifbfa520f3e0486c56d0988ce67af2ddb9cf29888
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk | 1 +
- .../haswell/native_raminit/raminit_main.c | 1 +
- .../haswell/native_raminit/raminit_native.h | 14 +
- .../haswell/native_raminit/reg_structs.h | 13 +
- .../native_raminit/train_receive_enable.c | 561 ++++++++++++++++++
- .../intel/haswell/registers/mchbar.h | 3 +
- 6 files changed, 593 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/train_receive_enable.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index ebe9e9b762..e2fbfb4211 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -16,3 +16,4 @@ romstage-y += setup_wdb.c
- romstage-y += spd_bitmunching.c
- romstage-y += testing_io.c
- romstage-y += timings_refresh.c
-+romstage-y += train_receive_enable.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 5e4674957d..7d444659c3 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = {
- { configure_memory_map, true, "MEMMAP", },
- { do_jedec_init, true, "JEDECINIT", },
- { pre_training, true, "PRETRAIN", },
-+ { train_receive_enable, true, "RCVET", },
- };
-
- /* Return a generic stepping value to make stepping checks simpler */
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 906b3143b9..b4e8c7de5a 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -42,6 +42,9 @@
- #define NUM_WDB_CL_MUX_SEEDS 3
- #define NUM_CADB_MUX_SEEDS 3
-
-+/* Specified in PI ticks. 64 PI ticks == 1 qclk */
-+#define tDQSCK_DRIFT 64
-+
- /* ZQ calibration types */
- enum {
- ZQ_INIT, /* DDR3: ZQCL with tZQinit, LPDDR3: ZQ Init with tZQinit */
-@@ -188,6 +191,7 @@ enum raminit_status {
- RAMINIT_STATUS_MPLL_INIT_FAILURE,
- RAMINIT_STATUS_POLL_TIMEOUT,
- RAMINIT_STATUS_REUT_ERROR,
-+ RAMINIT_STATUS_RCVEN_FAILURE,
- RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
- };
-
-@@ -270,6 +274,10 @@ struct sysinfo {
-
- union ddr_data_vref_adjust_reg dimm_vref;
-
-+ uint8_t io_latency[NUM_CHANNELS][NUM_SLOTRANKS];
-+ uint8_t rt_latency[NUM_CHANNELS][NUM_SLOTRANKS];
-+ uint32_t rt_io_comp[NUM_CHANNELS];
-+
- uint32_t data_offset_train[NUM_CHANNELS][NUM_LANES];
- uint32_t data_offset_comp[NUM_CHANNELS][NUM_LANES];
-
-@@ -344,6 +352,11 @@ static inline void clear_data_offset_train_all(struct sysinfo *ctrl)
- memset(ctrl->data_offset_train, 0, sizeof(ctrl->data_offset_train));
- }
-
-+static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint8_t byte)
-+{
-+ return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte));
-+}
-+
- /* Number of ticks to wait in units of 69.841279 ns (citation needed) */
- static inline void tick_delay(const uint32_t delay)
- {
-@@ -399,6 +412,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl);
- enum raminit_status configure_mc(struct sysinfo *ctrl);
- enum raminit_status configure_memory_map(struct sysinfo *ctrl);
- enum raminit_status do_jedec_init(struct sysinfo *ctrl);
-+enum raminit_status train_receive_enable(struct sysinfo *ctrl);
-
- void configure_timings(struct sysinfo *ctrl);
- void configure_refresh(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/reg_structs.h b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-index b943259b91..b099f4bb82 100644
---- a/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-+++ b/src/northbridge/intel/haswell/native_raminit/reg_structs.h
-@@ -297,6 +297,19 @@ union ddr_scram_misc_control_reg {
- uint32_t raw;
- };
-
-+union sc_io_latency_reg {
-+ struct __packed {
-+ uint32_t iolat_rank0 : 4; // Bits 3:0
-+ uint32_t iolat_rank1 : 4; // Bits 7:4
-+ uint32_t iolat_rank2 : 4; // Bits 11:8
-+ uint32_t iolat_rank3 : 4; // Bits 15:12
-+ uint32_t rt_iocomp : 6; // Bits 21:16
-+ uint32_t : 9; // Bits 30:22
-+ uint32_t dis_rt_clk_gate : 1; // Bits 31:31
-+ };
-+ uint32_t raw;
-+};
-+
- union mcscheds_cbit_reg {
- struct __packed {
- uint32_t dis_opp_cas : 1; // Bits 0:0
-diff --git a/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c
-new file mode 100644
-index 0000000000..576c6bc21e
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/train_receive_enable.c
-@@ -0,0 +1,561 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <console/console.h>
-+#include <northbridge/intel/haswell/haswell.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+#include "ranges.h"
-+
-+#define RCVEN_PLOT RAM_DEBUG
-+
-+static enum raminit_status change_rcven_timing(struct sysinfo *ctrl, const uint8_t channel)
-+{
-+ int16_t max_rcven = -4096;
-+ int16_t min_rcven = 4096;
-+ int16_t max_rcven_rank[NUM_SLOTRANKS];
-+ int16_t min_rcven_rank[NUM_SLOTRANKS];
-+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+ max_rcven_rank[rank] = max_rcven;
-+ min_rcven_rank[rank] = min_rcven;
-+ }
-+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ int16_t new_rcven = ctrl->rcven[channel][rank][byte];
-+ new_rcven -= ctrl->io_latency[channel][rank] * 64;
-+ if (max_rcven_rank[rank] < new_rcven)
-+ max_rcven_rank[rank] = new_rcven;
-+
-+ if (min_rcven_rank[rank] > new_rcven)
-+ min_rcven_rank[rank] = new_rcven;
-+ }
-+ if (max_rcven < max_rcven_rank[rank])
-+ max_rcven = max_rcven_rank[rank];
-+
-+ if (min_rcven > min_rcven_rank[rank])
-+ min_rcven = min_rcven_rank[rank];
-+ }
-+
-+ /*
-+ * Determine how far we are from the ideal center point for RcvEn timing.
-+ * (PiIdeal - AveRcvEn) / 64 is the ideal number of cycles we should have
-+ * for IO latency. command training will reduce this by 64, so plan for
-+ * that now in the ideal value. Round to closest integer.
-+ */
-+ const int16_t rre_pi_ideal = 256 + 64;
-+ const int16_t pi_reserve = 64;
-+ const int16_t rcven_center = (max_rcven + min_rcven) / 2;
-+ const int8_t iolat_target = DIV_ROUND_CLOSEST(rre_pi_ideal - rcven_center, 64);
-+
-+ int8_t io_g_offset = 0;
-+ int8_t io_lat[NUM_SLOTRANKS] = { 0 };
-+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ io_lat[rank] = iolat_target;
-+
-+ /* Check for RcvEn underflow/overflow */
-+ const int16_t rcven_lower = 64 * io_lat[rank] + min_rcven_rank[rank];
-+ if (rcven_lower < pi_reserve)
-+ io_lat[rank] += DIV_ROUND_UP(pi_reserve - rcven_lower, 64);
-+
-+ const int16_t rcven_upper = 64 * io_lat[rank] + max_rcven_rank[rank];
-+ if (rcven_upper > 511 - pi_reserve)
-+ io_lat[rank] -= DIV_ROUND_UP(rcven_upper - (511 - pi_reserve), 64);
-+
-+ /* Check for IO latency over/underflow */
-+ if (io_lat[rank] - io_g_offset > 14)
-+ io_g_offset = io_lat[rank] - 14;
-+
-+ if (io_lat[rank] - io_g_offset < 1)
-+ io_g_offset = io_lat[rank] - 1;
-+
-+ const int8_t cycle_offset = io_lat[rank] - ctrl->io_latency[channel][rank];
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ ctrl->rcven[channel][rank][byte] += 64 * cycle_offset;
-+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+ }
-+ }
-+
-+ /* Calculate new IO comp latency */
-+ union sc_io_latency_reg sc_io_lat = {
-+ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)),
-+ };
-+
-+ /* Check if we are underflowing or overflowing this field */
-+ if (io_g_offset < 0 && sc_io_lat.rt_iocomp < -io_g_offset) {
-+ printk(BIOS_ERR, "%s: IO COMP underflow\n", __func__);
-+ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset);
-+ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp);
-+ return RAMINIT_STATUS_RCVEN_FAILURE;
-+ }
-+ if (io_g_offset > 0 && io_g_offset > 0x3f - sc_io_lat.rt_iocomp) {
-+ printk(BIOS_ERR, "%s: IO COMP overflow\n", __func__);
-+ printk(BIOS_ERR, "io_g_offset: %d\n", io_g_offset);
-+ printk(BIOS_ERR, "rt_iocomp: %u\n", sc_io_lat.rt_iocomp);
-+ return RAMINIT_STATUS_RCVEN_FAILURE;
-+ }
-+ sc_io_lat.rt_iocomp += io_g_offset;
-+ ctrl->rt_io_comp[channel] = sc_io_lat.rt_iocomp;
-+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+ if (ctrl->rankmap[channel] & BIT(rank))
-+ ctrl->io_latency[channel][rank] = io_lat[rank] - io_g_offset;
-+
-+ const uint8_t shift = rank * 4;
-+ sc_io_lat.raw &= ~(0xf << shift);
-+ sc_io_lat.raw |= ctrl->io_latency[channel][rank] << shift;
-+ }
-+ mchbar_write32(SC_IO_LATENCY_ch(channel), sc_io_lat.raw);
-+ return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+#define RL_START (256 + 24)
-+#define RL_STOP (384 + 24)
-+#define RL_STEP 8
-+
-+#define RE_NUM_SAMPLES 6
-+
-+static enum raminit_status verify_high_region(const int32_t center, const int32_t lwidth)
-+{
-+ if (center > RL_STOP) {
-+ /* Check if center of high was found where it should be */
-+ printk(BIOS_ERR, "RcvEn: Center of high (%d) higher than expected\n", center);
-+ return RAMINIT_STATUS_RCVEN_FAILURE;
-+ }
-+ if (lwidth <= 32) {
-+ /* Check if width is large enough */
-+ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too small\n", lwidth);
-+ return RAMINIT_STATUS_RCVEN_FAILURE;
-+ }
-+ if (lwidth >= 96) {
-+ /* Since we're calibrating a phase, a too large region is a problem */
-+ printk(BIOS_ERR, "RcvEn: Width of high region (%d) too large\n", lwidth);
-+ return RAMINIT_STATUS_RCVEN_FAILURE;
-+ }
-+ return RAMINIT_STATUS_SUCCESS;
-+}
-+
-+static void program_io_latency(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank)
-+{
-+ const uint8_t shift = rank * 4;
-+ const uint8_t iolat = ctrl->io_latency[channel][rank];
-+ mchbar_clrsetbits32(SC_IO_LATENCY_ch(channel), 0xf << shift, iolat << shift);
-+}
-+
-+static void program_rl_delays(struct sysinfo *ctrl, const uint8_t rank, const uint16_t rl_delay)
-+{
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+ update_rxt(ctrl, channel, rank, byte, RXT_RCVEN, rl_delay);
-+ }
-+}
-+
-+static bool sample_dqs(const uint8_t channel, const uint8_t byte)
-+{
-+ return (get_data_train_feedback(channel, byte) & 0x1ff) >= BIT(RE_NUM_SAMPLES - 1);
-+}
-+
-+enum raminit_status train_receive_enable(struct sysinfo *ctrl)
-+{
-+ const struct reut_box reut_addr = {
-+ .col = {
-+ .start = 0,
-+ .stop = 1023,
-+ .inc_rate = 0,
-+ .inc_val = 1,
-+ },
-+ };
-+ const struct wdb_pat wdb_pattern = {
-+ .start_ptr = 0,
-+ .stop_ptr = 9,
-+ .inc_rate = 32,
-+ .dq_pattern = BASIC_VA,
-+ };
-+
-+ const uint16_t bytemask = BIT(ctrl->lanes) - 1;
-+ const uint8_t fine_step = 1;
-+
-+ const uint8_t rt_delta = is_hsw_ult() ? 4 : 2;
-+ const uint8_t rt_io_comp = 21 + rt_delta;
-+ const uint8_t rt_latency = 16 + rt_delta;
-+ setup_io_test(
-+ ctrl,
-+ ctrl->chanmap,
-+ PAT_RD,
-+ 2,
-+ RE_NUM_SAMPLES + 1,
-+ &reut_addr,
-+ 0,
-+ &wdb_pattern,
-+ 0,
-+ 8);
-+
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!does_ch_exist(ctrl, channel))
-+ continue;
-+
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ union ddr_data_control_2_reg data_control_2 = {
-+ .raw = ctrl->dq_control_2[channel][byte],
-+ };
-+ data_control_2.force_rx_on = 1;
-+ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw);
-+ }
-+ union ddr_data_control_0_reg data_control_0 = {
-+ .raw = ctrl->dq_control_0[channel],
-+ };
-+ if (ctrl->lpddr) {
-+ /**
-+ * W/A for b4618574 - @todo: remove for HSW ULT C0
-+ * Can't have force_odt_on together with leaker, disable LPDDR
-+ * mode during this training step. lpddr_mode is restored
-+ * at the end of this function from the host structure.
-+ */
-+ data_control_0.lpddr_mode = 0;
-+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+ }
-+ data_control_0.force_odt_on = 1;
-+ data_control_0.rl_training_mode = 1;
-+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+ mchbar_write32(SC_IO_LATENCY_ch(channel), (union sc_io_latency_reg) {
-+ .rt_iocomp = rt_io_comp,
-+ }.raw);
-+ }
-+ enum raminit_status status = RAMINIT_STATUS_SUCCESS;
-+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+ if (!does_rank_exist(ctrl, rank))
-+ continue;
-+
-+ /*
-+ * Set initial roundtrip latency values. Assume -4 QCLK for worst board
-+ * layout. This is calculated as HW_ROUNDT_LAT_DEFAULT_VALUE plus:
-+ *
-+ * DDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + N-mode value * 2
-+ * LPDDR3: Default + (2 * tAA) + 4 QCLK + PI_CLK + tDQSCK_max
-+ *
-+ * N-mode is 3 during training mode. Both channels use the same timings.
-+ */
-+ /** TODO: differs for LPDDR **/
-+ const uint32_t tmp = MAX(ctrl->multiplier, 4) + 5 + 2 * ctrl->tAA;
-+ const uint32_t initial_rt_latency = MIN(rt_latency + tmp, 0x3f);
-+
-+ uint8_t chanmask = 0;
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ chanmask |= select_reut_ranks(ctrl, channel, BIT(rank));
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ ctrl->io_latency[channel][rank] = 0;
-+ mchbar_write8(SC_ROUNDT_LAT_ch(channel) + rank, initial_rt_latency);
-+ ctrl->rt_latency[channel][rank] = initial_rt_latency;
-+ }
-+
-+ printk(BIOS_DEBUG, "Rank %u\n", rank);
-+ printk(BIOS_DEBUG, "Steps 1 and 2: Find middle of high region\n");
-+ printk(RCVEN_PLOT, "Byte");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(RCVEN_PLOT, "\t");
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+ printk(RCVEN_PLOT, "%u ", byte);
-+ }
-+ printk(RCVEN_PLOT, "\nRcvEn\n");
-+ struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 };
-+ for (uint16_t rl_delay = RL_START; rl_delay < RL_STOP; rl_delay += RL_STEP) {
-+ printk(RCVEN_PLOT, " % 3d", rl_delay);
-+ program_rl_delays(ctrl, rank, rl_delay);
-+ run_io_test(ctrl, chanmask, BASIC_VA, true);
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(RCVEN_PLOT, "\t");
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ const bool high = sample_dqs(channel, byte);
-+ printk(RCVEN_PLOT, high ? ". " : "# ");
-+ phase_record_pass(
-+ &region_data[channel][byte],
-+ high,
-+ rl_delay,
-+ RL_START,
-+ RL_STEP);
-+ }
-+ }
-+ printk(RCVEN_PLOT, "\n");
-+ }
-+ printk(RCVEN_PLOT, "\n");
-+ printk(BIOS_DEBUG, "Update RcvEn timing to be in the center of high region\n");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\n",
-+ channel, rank);
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ struct phase_train_data *const curr_data =
-+ &region_data[channel][byte];
-+ phase_append_current_to_initial(curr_data, RL_START, RL_STEP);
-+ const int32_t lwidth = range_width(curr_data->largest);
-+ const int32_t center = range_center(curr_data->largest);
-+ printk(BIOS_DEBUG, " B%u: \t%d\t%d\t%d\t%d\n",
-+ byte,
-+ curr_data->largest.start,
-+ curr_data->largest.end,
-+ lwidth,
-+ center);
-+
-+ status = verify_high_region(center, lwidth);
-+ if (status) {
-+ printk(BIOS_ERR,
-+ "RcvEn problems on channel %u, byte %u\n",
-+ channel, byte);
-+ goto clean_up;
-+ }
-+ ctrl->rcven[channel][rank][byte] = center;
-+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+ }
-+ printk(BIOS_DEBUG, "\n");
-+ }
-+
-+ printk(BIOS_DEBUG, "Step 3: Quarter preamble - Walk backwards\n");
-+ printk(RCVEN_PLOT, "Byte");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(RCVEN_PLOT, "\t");
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+ printk(RCVEN_PLOT, "%u ", byte);
-+ }
-+ printk(RCVEN_PLOT, "\nIOLAT\n");
-+ bool done = false;
-+ while (!done) {
-+ run_io_test(ctrl, chanmask, BASIC_VA, true);
-+ done = true;
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(RCVEN_PLOT, " %2u\t", ctrl->io_latency[channel][rank]);
-+ uint16_t highs = 0;
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ const bool high = sample_dqs(channel, byte);
-+ printk(RCVEN_PLOT, high ? "H " : "L ");
-+ if (high)
-+ highs |= BIT(byte);
-+ }
-+ if (!highs)
-+ continue;
-+
-+ done = false;
-+
-+ /* If all bytes sample high, adjust timing globally */
-+ if (highs == bytemask && ctrl->io_latency[channel][rank] < 14) {
-+ ctrl->io_latency[channel][rank] += 2;
-+ ctrl->io_latency[channel][rank] %= 16;
-+ program_io_latency(ctrl, channel, rank);
-+ continue;
-+ }
-+
-+ /* Otherwise, adjust individual bytes */
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ if (!(highs & BIT(byte)))
-+ continue;
-+
-+ if (ctrl->rcven[channel][rank][byte] < 128) {
-+ printk(BIOS_ERR,
-+ "RcvEn underflow: walking backwards\n");
-+ printk(BIOS_ERR,
-+ "For channel %u, rank %u, byte %u\n",
-+ channel, rank, byte);
-+ status = RAMINIT_STATUS_RCVEN_FAILURE;
-+ goto clean_up;
-+ }
-+ ctrl->rcven[channel][rank][byte] -= 128;
-+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+ }
-+ }
-+ printk(RCVEN_PLOT, "\n");
-+ }
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(BIOS_DEBUG, "\nC%u: Preamble\n", channel);
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ printk(BIOS_DEBUG,
-+ " B%u: %u\n", byte, ctrl->rcven[channel][rank][byte]);
-+ }
-+ }
-+ printk(BIOS_DEBUG, "\n");
-+
-+ printk(BIOS_DEBUG, "Step 4: Add 1 qclk\n");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ ctrl->rcven[channel][rank][byte] += 64;
-+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+ }
-+ }
-+ printk(BIOS_DEBUG, "\n");
-+
-+ printk(BIOS_DEBUG, "Step 5: Walk forward to find rising edge\n");
-+ printk(RCVEN_PLOT, "Byte");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(RCVEN_PLOT, "\t");
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+ printk(RCVEN_PLOT, "%u ", byte);
-+ }
-+ printk(RCVEN_PLOT, "\n inc\n");
-+ uint16_t ch_result[NUM_CHANNELS] = { 0 };
-+ uint8_t inc_preamble[NUM_CHANNELS][NUM_LANES] = { 0 };
-+ for (uint8_t inc = 0; inc < 64; inc += fine_step) {
-+ printk(RCVEN_PLOT, " %2u\t", inc);
-+ run_io_test(ctrl, chanmask, BASIC_VA, true);
-+ done = true;
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ if (ch_result[channel] & BIT(byte)) {
-+ /* Skip bytes that are already done */
-+ printk(RCVEN_PLOT, ". ");
-+ continue;
-+ }
-+ const bool pass = sample_dqs(channel, byte);
-+ printk(RCVEN_PLOT, pass ? ". " : "# ");
-+ if (pass) {
-+ ch_result[channel] |= BIT(byte);
-+ continue;
-+ }
-+ ctrl->rcven[channel][rank][byte] += fine_step;
-+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+ inc_preamble[channel][byte] = inc;
-+ }
-+ printk(RCVEN_PLOT, "\t");
-+ if (ch_result[channel] != bytemask)
-+ done = false;
-+ }
-+ printk(RCVEN_PLOT, "\n");
-+ if (done)
-+ break;
-+ }
-+ printk(BIOS_DEBUG, "\n");
-+ if (!done) {
-+ printk(BIOS_ERR, "Error: Preamble edge not found for all bytes\n");
-+ printk(BIOS_ERR, "The final RcvEn results are as follows:\n");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(BIOS_ERR, "Channel %u Rank %u: preamble\n",
-+ channel, rank);
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ printk(BIOS_ERR, " Byte %u: %u%s\n", byte,
-+ ctrl->rcven[channel][rank][byte],
-+ (ch_result[channel] ^ bytemask) & BIT(byte)
-+ ? ""
-+ : " *** Check this byte! ***");
-+ }
-+ }
-+ status = RAMINIT_STATUS_RCVEN_FAILURE;
-+ goto clean_up;
-+ }
-+
-+ printk(BIOS_DEBUG, "Step 6: center on preamble and clean up rank\n");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ printk(BIOS_DEBUG, "C%u: Preamble increment\n", channel);
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ /*
-+ * For Traditional, pull in RcvEn by 64. For ULT, take the DQS
-+ * drift into account to the specified guardband: tDQSCK_DRIFT.
-+ */
-+ ctrl->rcven[channel][rank][byte] -= tDQSCK_DRIFT;
-+ update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+ printk(BIOS_DEBUG, " B%u: %u %u\n", byte,
-+ ctrl->rcven[channel][rank][byte],
-+ inc_preamble[channel][byte]);
-+ }
-+ printk(BIOS_DEBUG, "\n");
-+ }
-+ printk(BIOS_DEBUG, "\n");
-+ }
-+
-+clean_up:
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!does_ch_exist(ctrl, channel))
-+ continue;
-+
-+ if (ctrl->lpddr) {
-+ /**
-+ * W/A for b4618574 - @todo: remove for HSW ULT C0
-+ * Can't have force_odt_on together with leaker, disable LPDDR mode for
-+ * this training step. This write will disable force_odt_on while still
-+ * keeping LPDDR mode disabled. Second write will restore LPDDR mode.
-+ */
-+ union ddr_data_control_0_reg data_control_0 = {
-+ .raw = ctrl->dq_control_0[channel],
-+ };
-+ data_control_0.lpddr_mode = 0;
-+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+ }
-+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ mchbar_write32(DQ_CONTROL_2(channel, byte),
-+ ctrl->dq_control_2[channel][byte]);
-+ }
-+ }
-+ io_reset();
-+ if (status)
-+ return status;
-+
-+ printk(BIOS_DEBUG, "Step 7: Sync IO latency across all ranks\n");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!does_ch_exist(ctrl, channel))
-+ continue;
-+
-+ status = change_rcven_timing(ctrl, channel);
-+ if (status)
-+ return status;
-+ }
-+ printk(BIOS_DEBUG, "\nFinal Receive Enable and IO latency settings:\n");
-+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+ if (!does_ch_exist(ctrl, channel))
-+ continue;
-+
-+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+ if (!rank_in_ch(ctrl, rank, channel))
-+ continue;
-+
-+ const union sc_io_latency_reg sc_io_latency = {
-+ .raw = mchbar_read32(SC_IO_LATENCY_ch(channel)),
-+ };
-+ printk(BIOS_DEBUG, " C%u.R%u: IOLAT = %u rt_iocomp = %u\n", channel,
-+ rank, ctrl->io_latency[channel][rank], sc_io_latency.rt_iocomp);
-+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+ printk(BIOS_DEBUG, " B%u: %u\n", byte,
-+ ctrl->rcven[channel][rank][byte]);
-+ }
-+ printk(BIOS_DEBUG, "\n");
-+ }
-+ }
-+ return status;
-+}
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index a81559bb1e..9172d4f2b0 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -18,6 +18,8 @@
- #define RX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0000, ch, rank, byte)
- #define TX_TRAIN_ch_r_b(ch, rank, byte) _DDRIO_C_R_B(0x0020, ch, rank, byte)
-
-+#define DDR_DATA_TRAIN_FEEDBACK(ch, byte) _DDRIO_C_R_B(0x0054, ch, 0, byte)
-+
- #define DQ_CONTROL_2(ch, byte) _DDRIO_C_R_B(0x0064, ch, 0, byte)
- #define DQ_CONTROL_0(ch, byte) _DDRIO_C_R_B(0x0074, ch, 0, byte)
-
-@@ -100,6 +102,7 @@
- #define COMMAND_RATE_LIMIT_ch(ch) _MCMAIN_C(0x4010, ch)
- #define TC_BANK_RANK_D_ch(ch) _MCMAIN_C(0x4014, ch)
- #define SC_ROUNDT_LAT_ch(ch) _MCMAIN_C(0x4024, ch)
-+#define SC_IO_LATENCY_ch(ch) _MCMAIN_C(0x4028, ch)
-
- #define REUT_ch_PAT_WDB_CL_MUX_CFG(ch) _MCMAIN_C(0x4040, ch)
-
---
-2.39.2
-
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-01 07:35:24 +0000