diff options
Diffstat (limited to 'config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch')
| -rw-r--r-- | config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch b/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch new file mode 100644 index 00000000..3a580662 --- /dev/null +++ b/config/coreboot/default/patches/0022-mb-dell-Add-Latitude-E5520-Sandy-Bridge.patch @@ -0,0 +1,442 @@ +From a7e2fde426280a944916c341586361f3ac9fa9a8 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin <nic.c3.14@gmail.com> +Date: Wed, 7 Feb 2024 10:23:38 -0700 +Subject: [PATCH 22/65] mb/dell: Add Latitude E5520 (Sandy Bridge) + +Mainboard is Krug 15". I do not physically have this system; someone +with physical access to one sent me the output of autoport which I then +modified to produce this port. I was also sent the VBT binary, which was +obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version +A14 of the vendor firmware. + +This was originally tested and found to be working as a standalone +board port in Libreboot, but this variant based port in upstream +coreboot has not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134 +Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e5520/data.vbt | Bin 0 -> 6144 bytes + .../variants/e5520/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e5520/gpio.c | 195 ++++++++++++++++++ + .../variants/e5520/hda_verb.c | 32 +++ + .../variants/e5520/overridetree.cb | 39 ++++ + 7 files changed, 292 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 72bdc96c0a..4e94a7ef80 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + ++config BOARD_DELL_LATITUDE_E5520 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_6144 ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E6420 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_10240 +@@ -55,6 +60,7 @@ config MAINBOARD_DIR + default "dell/snb_ivb_latitude" + + config MAINBOARD_PART_NUMBER ++ default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 + default "Latitude E5530" if BOARD_DELL_LATITUDE_E5530 +@@ -68,6 +74,7 @@ config USBDEBUG_HCD_INDEX + default 2 + + config VARIANT_DIR ++ default "e5520" if BOARD_DELL_LATITUDE_E5520 + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 + default "e5530" if BOARD_DELL_LATITUDE_E5530 +@@ -77,7 +84,8 @@ config VARIANT_DIR + config VGA_BIOS_ID + default "8086,0116" if BOARD_DELL_LATITUDE_E6520 + default "8086,0166" if BOARD_DELL_LATITUDE_E5530 +- default "8086,0126" if BOARD_DELL_LATITUDE_E6420 ++ default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ ++ || BOARD_DELL_LATITUDE_E5520 + default "8086,0166" if BOARD_DELL_LATITUDE_E6430 \ + || BOARD_DELL_LATITUDE_E6530 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index c7665ac263..7976691f21 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -1,5 +1,8 @@ + ## SPDX-License-Identifier: GPL-2.0-only + ++config BOARD_DELL_LATITUDE_E5520 ++ bool "Latitude E5520" ++ + config BOARD_DELL_LATITUDE_E6420 + bool "Latitude E6420" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..b511e75262e37fa123d674e9a7b21a8dfe427729 +GIT binary patch +literal 6144 +zcmeHKZ){Ul6hE);wSBvNZ|mL$bmQOM2BTvXUI!}^N9ejTij1vnu+)Wx6<c9(Y_%K6 +zzOV-@f<ehpWB5RHBpMBgG7}RuMuM2=l*E{6G$wq&gqTQ3#E2RZsOP@dvW*rP7>Fjj +z&F`Lj?>YC}bI(2Z+}C+6zKyiGrosQXuW7A+&1%<rN+Y1ck(}dLrx)Ma#^x>lnvFGE +zeD#gB>*#Tq4&j^|7Xcz1r^pp*)g#T}u1Me3ct>Pgls5Qi3!6e2W0%`a-Ic|3efWuR +zXJ@#}wJyGMTXTcY<%@TBKh@(3hP$Gjv}E}rx-%9D_eLXhYe!c&-VyDg-Cdo1>Biji +zNNsnlFW#|jdoOj?mZ43m>cVO%UE9@*E7x|%V~c4`XD4l9GCi~@+7pfMibfX8L?!^I +zc~Rg1I5SxH1DAEZ0{jA41jrJBh#-l;b6^%g7QrThRe)&%tQH_!ggOD7A_PRRgGuI0 +z0zi=n#rCB66d-sO$M~^6wgeb$2fH1|0R`v}xUiWCU`4SF;Dyh&j|mK&6WJWJ&Pq9I +zVgmFQfh+)vE}(KWwHA|Oh3fSkss|;2E(2i}s1?gRRV%8!K7U={vHD=s#+Fd)W^M1j +z{R4$??VSvEWpgT=vCM&1-U$bI6CB~IV3Z$$Vv7o!EDnev4j~R(MHsazZ~^fLLKGF4 +zEfQFOa3dZ?1Q1P#&4?!vyAk^k&m&$z3?WV+-b0*1j37o4=MX<3E+eiYge(Ht2umAW +zOPDmU>UL{flI9u|@JtVvfp#o8ek?VfVV9YP5(%pnZX~{PKq4WoWGmV8t$=Ri@{zLQ +zNYYt4<$0Ry&qIoG;7s-t333)Nu8opN{NG!)&!I@eO(cVx8vBVEBvotJ7%yNl$7iQ_ +zI=xk30+V$ff`F6<wRoF(TK%j9nsr#H23umU%)_7jNOl%*FPU567qbg;4gtp711nj2 +z#+kHw`v4|5cA+`UMIvAl;slnH1nl0v=xH<al>1}ljxDE1dcda^&!do|r^eJkI?aC- +zEQMSfm?<w*Unzumkj_w5>VYL6W4=aCiy4rk%xq~5LV?bi|GL2$G7li<%c7yd;6T34 +zQBN5huZ3~6`ChGkpb$Bg5ITb#2iK-qs|1`=sl6Dhn(Lj&8Agt?S{sTDmmtRj7Jm_1 +zFnt{w&FdFkWS3bl>OeL?eO+*i{)9G!cSI-InGt|U0eEYmRCOHm7|I;#LO8ksRIeJ# +zGe+jTwPg4C4TYuN(9zULV3k+hI$YuPo=%N8oZ#u_4S!3Xelt6N0BmuC`hCNeg+&97 +z6*!>)uHvr%2004GZv?!_-y&|TRmil=9D%Q`1aXBsnD^gov3*UZI34&1_vn(B=T4kZ +z_A>ClXVIBNaS^hd&^DrU6VgZMYeadMkdFxcktn|ra-Gl;n^I{bt86rCQ=YMry*B!$ +zP5ID9KDE)GZOY#^VwPyRq^y+48j0?ZlzxdkC()CV@`*&wO7vGr;qjA3rb}gIwM-gi +zx>HsT$mEDj-<OpyWb%zn|B@A3Hkp<!FT5;hrt_SZiy?*wDaIu{h>%Ir=@rh7)SR;b +zAEWQGv_X1)wq0y5Ha0c~&psIsln<Hiu3;#Lf;%*eI<@?p8cfMJV(IYi8q$NA#iS8` +z_~|4t4b^wtMSAeFST^F8-Tm<zu8D&j^8=&I4;I}Im>aeSK~X8*^Z9SE44_`P#KIUL +zf6^N2f>5HCPWM3N+f0MyWOV^kz~!-wVc4MRXOY>4Jsxd1RyBKEMzNf{RKhesKFdbq +zJ(*d<l2Y#n?E?~iBA39P?~Pr2d#}5=#Sfl-VGzGUF$4U2KcqCIVlwkC(&7PQk_X!a +z8}3Jgq-&U*Co|h1>l)ZQGyW_x->i#;FvQ*=Nv&nG0N5@D@jjv_Q}K}6MP?1A6`JGe +zDwj9pN+x;T4>`I9e5x(uqdK#OGB31ikk@Xv=dxLb4fx(;ktX@rOb~M~?dYQQYiPia +z8r;jUQ?sd2@3||-cb2Eb%JFYfxHsONoaJ^eqoKN{<g9?-%`7oWz+aJS0tEc!^d@hD +z1-I{%hr!Y?0uVZpUbl__37xn@jkD6Z>3SATgBQlEoN7&ZV9Eni9+>jLln16fFy(=V +H=7E0zE^L4Z + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c +new file mode 100644 +index 0000000000..ff83db095b +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/early_init.c +@@ -0,0 +1,14 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include <bootblock_common.h> ++#include <device/pci_ops.h> ++#include <ec/dell/mec5035/mec5035.h> ++#include <southbridge/intel/bd82x6x/pch.h> ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c +new file mode 100644 +index 0000000000..f76b93d9f0 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/gpio.c +@@ -0,0 +1,195 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include <southbridge/intel/common/gpio.h> ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_NATIVE, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_GPIO, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_NATIVE, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio12 = GPIO_DIR_OUTPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio12 = GPIO_LEVEL_HIGH, ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_NATIVE, ++ .gpio46 = GPIO_MODE_GPIO, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_NATIVE, ++ .gpio50 = GPIO_MODE_GPIO, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_GPIO, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_GPIO, ++ .gpio56 = GPIO_MODE_GPIO, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_OUTPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio46 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio50 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_OUTPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio53 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio55 = GPIO_DIR_OUTPUT, ++ .gpio56 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_LOW, ++ .gpio37 = GPIO_LEVEL_LOW, ++ .gpio46 = GPIO_LEVEL_HIGH, ++ .gpio50 = GPIO_LEVEL_HIGH, ++ .gpio51 = GPIO_LEVEL_LOW, ++ .gpio55 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_NATIVE, ++ .gpio69 = GPIO_MODE_NATIVE, ++ .gpio70 = GPIO_MODE_NATIVE, ++ .gpio71 = GPIO_MODE_NATIVE, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_GPIO, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio74 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c +new file mode 100644 +index 0000000000..1373975352 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include <device/azalia_device.h> ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x1028049a, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x1028049a), ++ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0xd5a301a0), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0x400000f0), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb +new file mode 100644 +index 0000000000..479d1b696e +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5520/overridetree.cb +@@ -0,0 +1,39 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x049a inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00000218" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 1, 6 }, ++ { 1, 1, 7 }, ++ }" ++ ++ device ref gbe off end ++ device ref pcie_rp4 off end ++ device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.5 + |