diff options
86 files changed, 8431 insertions, 756 deletions
diff --git a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb index 7afbe427..509e784e 100644 --- a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb @@ -288,7 +288,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode index 3609c5a8..428bed87 100644 --- a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode @@ -286,7 +286,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020mt_nri_12mb/target.cfg b/config/coreboot/dell9020mt_nri_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/dell9020mt_nri_12mb/target.cfg +++ b/config/coreboot/dell9020mt_nri_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb index e2c82603..ac1d9f16 100644 --- a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb @@ -288,7 +288,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode index 4fe0c52c..179af9cc 100644 --- a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode @@ -286,7 +286,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020sff_nri_12mb/target.cfg b/config/coreboot/dell9020sff_nri_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/dell9020sff_nri_12mb/target.cfg +++ b/config/coreboot/dell9020sff_nri_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/hp820g2_12mb/target.cfg b/config/coreboot/hp820g2_12mb/target.cfg index c54e8748..ada696cf 100644 --- a/config/coreboot/hp820g2_12mb/target.cfg +++ b/config/coreboot/hp820g2_12mb/target.cfg @@ -1,6 +1,8 @@ tree="default" xarch="i386-elf" payload_seabios="y" +payload_seabios_withgrub="y" payload_memtest="y" release="n" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb index ab3c464b..dd614202 100644 --- a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb @@ -325,7 +325,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode index b6a9afd1..a0dce901 100644 --- a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode @@ -323,7 +323,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/t440plibremrc_12mb/target.cfg b/config/coreboot/t440plibremrc_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/t440plibremrc_12mb/target.cfg +++ b/config/coreboot/t440plibremrc_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/w541_12mb/config/libgfxinit_corebootfb b/config/coreboot/w541_12mb/config/libgfxinit_corebootfb index 7db59d7b..ae155585 100644 --- a/config/coreboot/w541_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/w541_12mb/config/libgfxinit_corebootfb @@ -325,7 +325,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/w541_12mb/config/libgfxinit_txtmode b/config/coreboot/w541_12mb/config/libgfxinit_txtmode index a4a33d25..9a891434 100644 --- a/config/coreboot/w541_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/w541_12mb/config/libgfxinit_txtmode @@ -323,7 +323,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/w541_12mb/target.cfg b/config/coreboot/w541_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/w541_12mb/target.cfg +++ b/config/coreboot/w541_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/data/grub/background/COPYING b/config/data/grub/background/COPYING new file mode 100644 index 00000000..ba07806d --- /dev/null +++ b/config/data/grub/background/COPYING @@ -0,0 +1,4 @@ +The deer logo for Libreboot is copyright 2014 Marcus Moeller and released under +CC-0 1.0: https://creativecommons.org/publicdomain/zero/1.0/legalcode +The grey backgrounds with it were made by Leah Rowe in 2016, also CC-0 1.0; the +same applies to the purple version which was made in 2023. diff --git a/config/grub/background/background1024x768.png b/config/data/grub/background/background1024x768.png Binary files differindex 181909db..181909db 100644 --- a/config/grub/background/background1024x768.png +++ b/config/data/grub/background/background1024x768.png diff --git a/config/grub/background/background1280x800.png b/config/data/grub/background/background1280x800.png Binary files differindex f563ea63..f563ea63 100644 --- a/config/grub/background/background1280x800.png +++ b/config/data/grub/background/background1280x800.png diff --git a/config/grub/bootorder b/config/data/grub/bootorder index b33e1295..b33e1295 100644 --- a/config/grub/bootorder +++ b/config/data/grub/bootorder diff --git a/config/grub/keymap/colemak.gkb b/config/data/grub/keymap/colemak.gkb Binary files differindex d357816b..d357816b 100644 --- a/config/grub/keymap/colemak.gkb +++ b/config/data/grub/keymap/colemak.gkb diff --git a/config/grub/keymap/deqwertz.gkb b/config/data/grub/keymap/deqwertz.gkb Binary files differindex 4928d026..4928d026 100644 --- a/config/grub/keymap/deqwertz.gkb +++ b/config/data/grub/keymap/deqwertz.gkb diff --git a/config/grub/keymap/esqwerty.gkb b/config/data/grub/keymap/esqwerty.gkb Binary files differindex 6ce76330..6ce76330 100644 --- a/config/grub/keymap/esqwerty.gkb +++ b/config/data/grub/keymap/esqwerty.gkb diff --git a/config/grub/keymap/frazerty.gkb b/config/data/grub/keymap/frazerty.gkb Binary files differindex f8455154..f8455154 100644 --- a/config/grub/keymap/frazerty.gkb +++ b/config/data/grub/keymap/frazerty.gkb diff --git a/config/grub/keymap/frdvbepo.gkb b/config/data/grub/keymap/frdvbepo.gkb Binary files differindex 20702607..20702607 100644 --- a/config/grub/keymap/frdvbepo.gkb +++ b/config/data/grub/keymap/frdvbepo.gkb diff --git a/config/grub/keymap/itqwerty.gkb b/config/data/grub/keymap/itqwerty.gkb Binary files differindex db10a54c..db10a54c 100644 --- a/config/grub/keymap/itqwerty.gkb +++ b/config/data/grub/keymap/itqwerty.gkb diff --git a/config/grub/keymap/ptqwerty.gkb b/config/data/grub/keymap/ptqwerty.gkb Binary files differindex 5d9b453e..5d9b453e 100644 --- a/config/grub/keymap/ptqwerty.gkb +++ b/config/data/grub/keymap/ptqwerty.gkb diff --git a/config/grub/keymap/svenska.gkb b/config/data/grub/keymap/svenska.gkb Binary files differindex 75ca762d..75ca762d 100644 --- a/config/grub/keymap/svenska.gkb +++ b/config/data/grub/keymap/svenska.gkb diff --git a/config/grub/keymap/trqwerty.gkb b/config/data/grub/keymap/trqwerty.gkb Binary files differindex 452100d5..452100d5 100644 --- a/config/grub/keymap/trqwerty.gkb +++ b/config/data/grub/keymap/trqwerty.gkb diff --git a/config/grub/keymap/ukdvorak.gkb b/config/data/grub/keymap/ukdvorak.gkb Binary files differindex 76b9e380..76b9e380 100644 --- a/config/grub/keymap/ukdvorak.gkb +++ b/config/data/grub/keymap/ukdvorak.gkb diff --git a/config/grub/keymap/ukqwerty.gkb b/config/data/grub/keymap/ukqwerty.gkb Binary files differindex 5f513d85..5f513d85 100644 --- a/config/grub/keymap/ukqwerty.gkb +++ b/config/data/grub/keymap/ukqwerty.gkb diff --git a/config/grub/keymap/usdvorak.gkb b/config/data/grub/keymap/usdvorak.gkb Binary files differindex ef88232c..ef88232c 100644 --- a/config/grub/keymap/usdvorak.gkb +++ b/config/data/grub/keymap/usdvorak.gkb diff --git a/config/grub/keymap/usqwerty.gkb b/config/data/grub/keymap/usqwerty.gkb Binary files differindex 0ea130f2..0ea130f2 100644 --- a/config/grub/keymap/usqwerty.gkb +++ b/config/data/grub/keymap/usqwerty.gkb diff --git a/config/grub/modules.list b/config/data/grub/module/default index 381451b9..503c61c8 100644..100755 --- a/config/grub/modules.list +++ b/config/data/grub/module/default @@ -9,7 +9,6 @@ usbserial_pl2303 \ usbserial_usbdebug \ video_colors \ " - # Modules (and always loaded) grub_modules=" \ acpi \ diff --git a/config/data/grub/module/xhci b/config/data/grub/module/xhci new file mode 100755 index 00000000..8bf80bfe --- /dev/null +++ b/config/data/grub/module/xhci @@ -0,0 +1,157 @@ +# Install modules (installed, but not automatically loaded) +grub_install_modules=" \ +hexdump \ +newc \ +odc \ +usbserial_common \ +usbserial_ftdi \ +usbserial_pl2303 \ +usbserial_usbdebug \ +video_colors \ +" +# Modules (and always loaded) +grub_modules=" \ +acpi \ +ahci \ +at_keyboard \ +all_video \ +ata \ +bitmap \ +bitmap_scale \ +boot \ +bsd \ +btrfs \ +cat \ +cbfs \ +cbls \ +cbmemc \ +cbtime \ +chain \ +configfile \ +cpio \ +cpio_be \ +crc64 \ +crypto \ +cryptodisk \ +diskfilter \ +echo \ +xhci \ +ehci \ +eval \ +exfat \ +elf \ +ext2 \ +fat \ +f2fs \ +gcry_arcfour \ +gcry_blowfish \ +gcry_camellia \ +gcry_cast5 \ +gcry_crc \ +gcry_des \ +gcry_dsa \ +gcry_idea \ +gcry_md4 \ +gcry_md5 \ +gcry_rfc2268 \ +gcry_rijndael \ +gcry_rmd160 \ +gcry_rsa \ +gcry_seed \ +gcry_serpent \ +gcry_sha1 \ +gcry_sha256 \ +gcry_sha512 \ +gcry_tiger \ +gcry_twofish \ +gcry_whirlpool \ +geli \ +gfxmenu \ +gfxterm_background \ +gfxterm_menu \ +gzio \ +hashsum \ +halt \ +help \ +iorw \ +iso9660 \ +jpeg \ +json \ +keylayouts \ +keystatus \ +linux \ +linux16 \ +loadenv \ +loopback \ +ls \ +lsacpi \ +lsmmap \ +lspci \ +luks \ +luks2 \ +argon2 \ +lvm \ +lzopio \ +mdraid09 \ +mdraid09_be \ +mdraid1x \ +memdisk \ +memrw \ +minicmd \ +mmap \ +multiboot \ +multiboot2 \ +nativedisk \ +normal \ +ntfs \ +nvme \ +ohci \ +part_bsd \ +part_dfly \ +part_gpt \ +part_msdos \ +password \ +password_pbkdf2 \ +pata \ +pbkdf2 \ +pcidump \ +pgp \ +play \ +png \ +procfs \ +raid5rec \ +raid6rec \ +read \ +reboot \ +regexp \ +romfs \ +scsi \ +search \ +search_fs_file \ +search_fs_uuid \ +search_label \ +serial \ +syslinuxcfg \ +setjmp \ +setpci \ +spkmodem \ +squash4 \ +sleep \ +tar \ +test \ +true \ +uhci \ +udf \ +ufs1 \ +ufs1_be \ +ufs2 \ +usb \ +usb_keyboard \ +usbms \ +xfs \ +xzio \ +zfs \ +zfscrypt \ +zfsinfo \ +zstd \ +" diff --git a/config/git/grub b/config/git/grub index b52fa0fb..21634cd6 100644 --- a/config/git/grub +++ b/config/git/grub @@ -1,14 +1,6 @@ {grub}{ - rev: 8719cc2040368d43ab2de0b6e1b850b2c9cfc5b7 - loc: grub + rev: HEAD + loc: grub/grub url: git://git.savannah.gnu.org/grub.git bkup_url: https://codeberg.org/libreboot/grub - depend: gnulib -} - -{gnulib}{ - rev: 9f48fb992a3d7e96610c4ce8be969cff2d61a01b - loc: grub/gnulib - url: git://git.sv.gnu.org/gnulib - bkup_url: https://codeberg.org/libreboot/gnulib } diff --git a/config/grub/background/COPYING b/config/grub/background/COPYING deleted file mode 100644 index 9a5f81c6..00000000 --- a/config/grub/background/COPYING +++ /dev/null @@ -1,3 +0,0 @@ -The deer logo for Libreboot is copyright 2014 Marcus Moeller and released under -CC-0: https://creativecommons.org/publicdomain/zero/1.0/legalcode -The grey backgrounds with it were made by Leah Rowe in 2016, also CC-0 diff --git a/config/grub/build.list b/config/grub/build.list new file mode 100644 index 00000000..5b891e5a --- /dev/null +++ b/config/grub/build.list @@ -0,0 +1 @@ +grub.elf diff --git a/config/grub/config/AUTHORS b/config/grub/config/AUTHORS deleted file mode 100644 index 542739ce..00000000 --- a/config/grub/config/AUTHORS +++ /dev/null @@ -1,2 +0,0 @@ -Copyright (C) 2014, 2015, 2016, 2020, 2021, 2023 Leah Rowe <leah@libreboot.org> -Copyright (C) 2015 Klemens Nanni <contact@autoboot.org> diff --git a/config/grub/config/COPYING b/config/grub/config/COPYING deleted file mode 100644 index f74bc54d..00000000 --- a/config/grub/config/COPYING +++ /dev/null @@ -1,695 +0,0 @@ -# GRUB configuration files under resources/grub/config/ - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -# See AUTHORS for copyright holder information. - -# Full terms of GPLv3 below, taken from https://www.gnu.org/licenses/licenses.html -________________________________________________________________________ - - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - <program> Copyright (C) <year> <name of author> - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -<http://www.gnu.org/licenses/>. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/config/grub/config/grub_memdisk.cfg b/config/grub/config/grub_memdisk.cfg deleted file mode 100644 index 18d5d535..00000000 --- a/config/grub/config/grub_memdisk.cfg +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-3.0-or-later - -set prefix=(memdisk)/boot/grub - -if [ -f (cbfsdisk)/grub.cfg ]; then - source (cbfsdisk)/grub.cfg -else - source (memdisk)/boot/grub/grub_default.cfg -fi diff --git a/config/grub/config/grub.cfg b/config/grub/default/config/payload index 7adee869..f81d5930 100644 --- a/config/grub/config/grub.cfg +++ b/config/grub/default/config/payload @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-3.0-or-later +# Copyright (C) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> +# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org> set prefix=(memdisk)/boot/grub @@ -215,6 +217,14 @@ menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE [d]' --hotkey= menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe [e]' --hotkey='e' { search_bootcfg nvme } +if [ -f (cbfsdisk)/grub.cfg ]; then +menuentry 'Load configuration (grub.cfg) in CBFS [t]' --hotkey='t' { + set root='(cbfsdisk)' + if [ -f /grub.cfg ]; then + configfile /grub.cfg + fi +} +fi if [ -f (cbfsdisk)/grubtest.cfg ]; then menuentry 'Load test configuration (grubtest.cfg) inside of CBFS [t]' --hotkey='t' { set root='(cbfsdisk)' diff --git a/config/grub/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch b/config/grub/default/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch index 183f5a91..183f5a91 100644 --- a/config/grub/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch +++ b/config/grub/default/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch diff --git a/config/grub/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch b/config/grub/default/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch index 6ff97979..6ff97979 100644 --- a/config/grub/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch +++ b/config/grub/default/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch diff --git a/config/grub/patches/0002-luks2/0003-Add-CC0-license.patch b/config/grub/default/patches/0002-luks2/0003-Add-CC0-license.patch index dc9060c3..dc9060c3 100644 --- a/config/grub/patches/0002-luks2/0003-Add-CC0-license.patch +++ b/config/grub/default/patches/0002-luks2/0003-Add-CC0-license.patch diff --git a/config/grub/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch b/config/grub/default/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch index be875e67..be875e67 100644 --- a/config/grub/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch +++ b/config/grub/default/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch diff --git a/config/grub/patches/0002-luks2/0005-Add-Argon2-algorithm.patch b/config/grub/default/patches/0002-luks2/0005-Add-Argon2-algorithm.patch index 1c6b4f04..1c6b4f04 100644 --- a/config/grub/patches/0002-luks2/0005-Add-Argon2-algorithm.patch +++ b/config/grub/default/patches/0002-luks2/0005-Add-Argon2-algorithm.patch diff --git a/config/grub/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch b/config/grub/default/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch index 5d56bd61..5d56bd61 100644 --- a/config/grub/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch +++ b/config/grub/default/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch diff --git a/config/grub/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch b/config/grub/default/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch index f2e26fd4..f2e26fd4 100644 --- a/config/grub/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch +++ b/config/grub/default/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch diff --git a/config/grub/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch b/config/grub/default/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch index dc65b7a6..dc65b7a6 100644 --- a/config/grub/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch +++ b/config/grub/default/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch diff --git a/config/grub/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch b/config/grub/default/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch index 21e8630b..21e8630b 100644 --- a/config/grub/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch +++ b/config/grub/default/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch diff --git a/config/grub/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch b/config/grub/default/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch index fbef86a4..fbef86a4 100644 --- a/config/grub/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch +++ b/config/grub/default/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch diff --git a/config/grub/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch b/config/grub/default/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch index 25091d16..25091d16 100644 --- a/config/grub/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch +++ b/config/grub/default/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch diff --git a/config/grub/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch b/config/grub/default/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch index f4cf939e..f4cf939e 100644 --- a/config/grub/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch +++ b/config/grub/default/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch diff --git a/config/grub/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch b/config/grub/default/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch index 25221c9c..25221c9c 100644 --- a/config/grub/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch +++ b/config/grub/default/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch diff --git a/config/grub/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch b/config/grub/default/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch index 4345ebae..4345ebae 100644 --- a/config/grub/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch +++ b/config/grub/default/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch diff --git a/config/grub/default/target.cfg b/config/grub/default/target.cfg new file mode 100644 index 00000000..fa5735e9 --- /dev/null +++ b/config/grub/default/target.cfg @@ -0,0 +1,5 @@ +tree="default" +rev="8719cc2040368d43ab2de0b6e1b850b2c9cfc5b7" +bootstrapargs="--gnulib-srcdir=gnulib/ --no-git" +autoconfargs="--with-platform=coreboot --disable-werror" +makeargs="FS_PAYLOAD_MODULES=\"\"" diff --git a/config/grub/xhci/config/payload b/config/grub/xhci/config/payload new file mode 100644 index 00000000..0e16ecb6 --- /dev/null +++ b/config/grub/xhci/config/payload @@ -0,0 +1,290 @@ +# SPDX-License-Identifier: GPL-3.0-or-later +# Copyright (C) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> +# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org> + +set prefix=(memdisk)/boot/grub + +insmod at_keyboard +insmod usb_keyboard +insmod nativedisk +insmod xhci +insmod ehci +insmod ohci +insmod uhci +insmod usb +insmod usbms +insmod regexp + +terminal_input --append at_keyboard +terminal_input --append usb_keyboard +terminal_output --append cbmemc + +# User interface overrides wherever "keystatus" is supported +# Keep SHIFT key pressed before powering on to disable graphics +if keystatus --shift; then + terminal_output --append vga_text +else + gfxpayload=keep + terminal_output --append gfxterm + + if [ -f (cbfsdisk)/background.png ]; then + insmod png + background_image (cbfsdisk)/background.png + elif [ -f (cbfsdisk)/background.jpg ]; then + insmod jpeg + background_image (cbfsdisk)/background.jpg + fi +fi + +# Keep CTRL pressed to enable default serial terminal (COM1 or the like) +if keystatus --ctrl; then + serial + terminal_input --append serial + terminal_output --append serial +fi + +# Keep ALT pressed to enable spkmodem +if keystatus --alt; then + terminal_output --append spkmodem +fi + + +set default="0" +if [ -f (cbfsdisk)/timeout.cfg ]; then + source (cbfsdisk)/timeout.cfg +else + set timeout=5 +fi +set grub_scan_disk="nvme ahci ata" +if [ -f (cbfsdisk)/scan.cfg ]; then + source (cbfsdisk)/scan.cfg +fi + +if [ -f (cbfsdisk)/keymap.gkb ]; then + keymap (cbfsdisk)/keymap.gkb +fi + +function really_try_user_config { + set root="${1}" + + if [ -f /"${2}"/grub.cfg ]; then + unset superusers + configfile /"${2}"/grub.cfg + fi +} + +function try_user_config { + # The @/... entries are for cases where the BTRFS filesystem is being used + for dir in grub boot/grub @/grub @/boot/grub grub2 boot/grub2 @/grub2 @/boot/grub2 boot @/boot; do + really_try_user_config "${1}" "${dir}" + done + for dir in ubuntu debian redhat; do + really_try_user_config "${1}" "EFI/${dir}" + done +} +function search_grub { + echo -n "Attempting to load grub.cfg from '${1}' devices" + for i in 0 1 2 3 4 5 6 7 8; do + for part in 1 2 3 4 5 6 7 8 9 10 11 12; do + if [ "${1}" != "nvme" ]; then + try_user_config "(${1}${i},${part})" + else + # TODO: do we care about other namesapces + try_user_config "(nvme${i}n1,${part})" + fi + done + if [ "${1}" != "nvme" ]; then + # raw devices e.g. (ahci0) instead of (ahci0,1) + try_user_config "(${1}${i})" + else + # TODO: do we care about other namesapces + try_user_config "(nvme${i}n1)" + fi + done + echo # Insert newline +} + +function try_isolinux_config { + set root="${1}" + for dir in '' /boot /EFI /@ /@/boot; do + if [ -f "${dir}"/isolinux/isolinux.cfg ]; then + syslinux_configfile -i "${dir}"/isolinux/isolinux.cfg + elif [ -f "${dir}"/syslinux/syslinux.cfg ]; then + syslinux_configfile -s "${dir}"/syslinux/syslinux.cfg + elif [ -f "${dir}"/syslinux/extlinux.conf ]; then + syslinux_configfile -s "${dir}"/syslinux/extlinux.conf + elif [ -f "${dir}"/extlinux/extlinux.conf ]; then + syslinux_configfile -s "${dir}"/extlinux/extlinux.conf + fi + done +} +function search_isolinux { + echo "\nAttempting to parse iso/sys/extlinux config from '${1}' devices" + for i in 0 1 2 3 4 5 6 7 8; do + for part in 1 2 3 4 5 6 7 8 9 10 11 12; do + if [ "${1}" != "nvme" ]; then + try_isolinux_config "(${1}${i},${part})" + else + # TODO: see above + try_isolinux_config "(nvme${i}n1,${part})" + fi + done + if [ "${1}" != "nvme" ]; then + # raw devices e.g. (usb0) instead of (usb0,1) + try_isolinux_config "(${1}${i})" + else + # TODO: do we care about other namesapces + try_isolinux_config "(nvme${i}n1)" + fi + done + echo # Insert newline +} +function try_bootcfg { + try_user_config "${1}" + try_isolinux_config "${1}" +} +function search_bootcfg { + search_grub "${1}" + search_isolinux "${1}" +} +menuentry 'Load Operating System (incl. fully encrypted disks) [o]' --hotkey='o' { + + for grub_disk in ${grub_scan_disk}; do + search_bootcfg ${grub_disk} + done + + # grub device enumeration is very slow, so checks are hardcoded + + # TODO: add more strings, based on what distros set up when + # the user select auto-partitioning on those installers + lvmvol="lvm/grubcrypt-bootvol lvm/grubcrypt-rootvol" + + raidvol="md/0 md/1 md/2 md/3 md/4 md/5 md/6 md/7 md/8 md/9" + + # in practise, doing multiple redundant checks is perfectly fast and + # TODO: optimize grub itself, and use */? here for everything + + for vol in ${lvmvol} ${raidvol} ; do + try_bootcfg "${vol}" + done + + unset bootdev + for grub_disk in ${grub_scan_disk}; do + for i in 0 1 2 3 4 5 6 7 8; do + for part in 1 2 3 4 5 6 7 8 9 10 11 12; do + if [ "${grub_disk}" = "ahci" ]; then + bootdev="${bootdev} (ahci${i},${part})" + elif [ "${grub_disk}" = "ata" ]; then + bootdev="${bootdev} (ata${i},${part})" + elif [ "${grub_disk}" = "nvme" ]; then + # TODO: do we care about other namesapces + bootdev="${bootdev} (nvme${i}n1,${part})" + fi + done + done + done + + set pager=0 + echo -n "Attempting to unlock encrypted volumes" + for dev in ${bootdev} ${lvmvol} ${raidvol}; do + if cryptomount "${dev}" ; then break ; fi + done + set pager=1 + echo + + # after cryptomount, lvm volumes might be available + for vol in ${lvmvol}; do + try_bootcfg "${vol}" + done + + search_bootcfg crypto + + for vol in lvm/* ; do + try_bootcfg "${vol}" + done + + true # Prevent pager requiring to accept each line instead of whole screen +} + +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on USB [s]' --hotkey='s' { + search_bootcfg usb +} +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on AHCI [a]' --hotkey='a' { + search_bootcfg ahci +} +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE [d]' --hotkey='d' { + search_bootcfg ata +} +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe [e]' --hotkey='e' { + search_bootcfg nvme +} +if [ -f (cbfsdisk)/grub.cfg ]; then +menuentry 'Load configuration (grub.cfg) in CBFS [t]' --hotkey='t' { + set root='(cbfsdisk)' + if [ -f /grub.cfg ]; then + configfile /grub.cfg + fi +} +fi +if [ -f (cbfsdisk)/grubtest.cfg ]; then +menuentry 'Load test configuration (grubtest.cfg) in CBFS [t]' --hotkey='t' { + set root='(cbfsdisk)' + if [ -f /grubtest.cfg ]; then + configfile /grubtest.cfg + fi +} +fi +if [ -f (cbfsdisk)/seabios.elf ]; then +menuentry 'Load SeaBIOS (payload) [b]' --hotkey='b' { + set root='cbfsdisk' + chainloader /seabios.elf +} +fi +if [ -f (cbfsdisk)/img/grub2 ]; then +menuentry 'Return to SeaBIOS [b]' --hotkey='b' { + set root='cbfsdisk' + chainloader /fallback/payload +} +fi +menuentry 'Poweroff [p]' --hotkey='p' { + halt +} +menuentry 'Reboot [r]' --hotkey='r' { + reboot +} +if [ -f (cbfsdisk)/img/memtest ]; then +menuentry 'Load MemTest86+ [m]' --hotkey='m' { + set root='cbfsdisk' + chainloader /img/memtest +} +fi + +submenu 'Other [z]' --hotkey='z' { + menuentry 'Enable default serial terminal [s]' --hotkey='s' { + serial + terminal_input --append serial + terminal_output --append serial + } + + menuentry 'Disable default serial terminal' { + terminal_input --remove serial + terminal_output --remove serial + } + + menuentry 'Enable gfxterm' { + terminal_output --append gfxterm + terminal_output --remove vga_text + } + menuentry 'Disable gfxterm [g]' --hotkey='g' { + terminal_output --remove gfxterm + terminal_output --append vga_text + } + + menuentry 'Enable spkmodem [a]' --hotkey='a' { + terminal_output --append spkmodem + } + + menuentry 'Disable spkmodem [z]' --hotkey='z' { + terminal_output --remove spkmodem + } +} diff --git a/config/grub/xhci/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch b/config/grub/xhci/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch new file mode 100644 index 00000000..183f5a91 --- /dev/null +++ b/config/grub/xhci/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch @@ -0,0 +1,90 @@ +From ce13539fe2103abbd991814d995e06cf96e485f7 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 31 Oct 2021 03:47:05 +0000 +Subject: [PATCH 1/3] mitigate grub's missing characters for borders/arrow + characters + +This cleans up the display on the main screen in GRUB. + +Just don't draw a border, at all. +--- + grub-core/normal/menu_text.c | 49 ++---------------------------------- + 1 file changed, 2 insertions(+), 47 deletions(-) + +diff --git a/grub-core/normal/menu_text.c b/grub-core/normal/menu_text.c +index b1321eb26..e76094dfd 100644 +--- a/grub-core/normal/menu_text.c ++++ b/grub-core/normal/menu_text.c +@@ -108,47 +108,6 @@ grub_print_message_indented (const char *msg, int margin_left, int margin_right, + grub_print_message_indented_real (msg, margin_left, margin_right, term, 0); + } + +-static void +-draw_border (struct grub_term_output *term, const struct grub_term_screen_geometry *geo) +-{ +- int i; +- +- grub_term_setcolorstate (term, GRUB_TERM_COLOR_NORMAL); +- +- grub_term_gotoxy (term, (struct grub_term_coordinate) { geo->first_entry_x - 1, +- geo->first_entry_y - 1 }); +- grub_putcode (GRUB_UNICODE_CORNER_UL, term); +- for (i = 0; i < geo->entry_width + 1; i++) +- grub_putcode (GRUB_UNICODE_HLINE, term); +- grub_putcode (GRUB_UNICODE_CORNER_UR, term); +- +- for (i = 0; i < geo->num_entries; i++) +- { +- grub_term_gotoxy (term, (struct grub_term_coordinate) { geo->first_entry_x - 1, +- geo->first_entry_y + i }); +- grub_putcode (GRUB_UNICODE_VLINE, term); +- grub_term_gotoxy (term, +- (struct grub_term_coordinate) { geo->first_entry_x + geo->entry_width + 1, +- geo->first_entry_y + i }); +- grub_putcode (GRUB_UNICODE_VLINE, term); +- } +- +- grub_term_gotoxy (term, +- (struct grub_term_coordinate) { geo->first_entry_x - 1, +- geo->first_entry_y - 1 + geo->num_entries + 1 }); +- grub_putcode (GRUB_UNICODE_CORNER_LL, term); +- for (i = 0; i < geo->entry_width + 1; i++) +- grub_putcode (GRUB_UNICODE_HLINE, term); +- grub_putcode (GRUB_UNICODE_CORNER_LR, term); +- +- grub_term_setcolorstate (term, GRUB_TERM_COLOR_NORMAL); +- +- grub_term_gotoxy (term, +- (struct grub_term_coordinate) { geo->first_entry_x - 1, +- (geo->first_entry_y - 1 + geo->num_entries +- + GRUB_TERM_MARGIN + 1) }); +-} +- + static int + print_message (int nested, int edit, struct grub_term_output *term, int dry_run) + { +@@ -167,10 +126,8 @@ command-line or ESC to discard edits and return to the GRUB menu."), + { + char *msg_translated; + +- msg_translated = grub_xasprintf (_("Use the %C and %C keys to select which " +- "entry is highlighted."), +- GRUB_UNICODE_UPARROW, +- GRUB_UNICODE_DOWNARROW); ++ msg_translated = grub_xasprintf (_("Use the arrow keys to select which " ++ "entry is highlighted.")); + if (!msg_translated) + return 0; + ret += grub_print_message_indented_real (msg_translated, STANDARD_MARGIN, +@@ -410,8 +367,6 @@ grub_menu_init_page (int nested, int edit, + + grub_term_normal_color = grub_color_menu_normal; + grub_term_highlight_color = grub_color_menu_highlight; +- if (geo->border) +- draw_border (term, geo); + grub_term_normal_color = old_color_normal; + grub_term_highlight_color = old_color_highlight; + geo->timeout_y = geo->first_entry_y + geo->num_entries +-- +2.25.1 + diff --git a/config/grub/xhci/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch b/config/grub/xhci/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch new file mode 100644 index 00000000..6ff97979 --- /dev/null +++ b/config/grub/xhci/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch @@ -0,0 +1,25 @@ +From 70f9e72c3ff6381fe3519612de3b649c0cf26b9a Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sat, 19 Nov 2022 16:30:24 +0000 +Subject: [PATCH 2/3] say the name libreboot, in the grub menu + +--- + grub-core/normal/main.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/grub-core/normal/main.c b/grub-core/normal/main.c +index bd4431000..31308e16a 100644 +--- a/grub-core/normal/main.c ++++ b/grub-core/normal/main.c +@@ -209,7 +209,7 @@ grub_normal_init_page (struct grub_term_output *term, + + grub_term_cls (term); + +- msg_formatted = grub_xasprintf (_("GNU GRUB version %s"), PACKAGE_VERSION); ++ msg_formatted = grub_xasprintf (_("Libreboot 20240504 release, based on coreboot. https://libreboot.org/")); + if (!msg_formatted) + return; + +-- +2.25.1 + diff --git a/config/grub/xhci/patches/0002-luks2/0003-Add-CC0-license.patch b/config/grub/xhci/patches/0002-luks2/0003-Add-CC0-license.patch new file mode 100644 index 00000000..dc9060c3 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0003-Add-CC0-license.patch @@ -0,0 +1,42 @@ +From de6e7cc62522ce1be21bd2f06e7c15cd234b5426 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 1/6] Add CC0 license + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + grub-core/kern/dl.c | 3 ++- + util/grub-module-verifierXX.c | 3 ++- + 2 files changed, 4 insertions(+), 2 deletions(-) + +diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c +index 0bf40caa6..4011e2d15 100644 +--- a/grub-core/kern/dl.c ++++ b/grub-core/kern/dl.c +@@ -470,7 +470,8 @@ grub_dl_check_license (grub_dl_t mod, Elf_Ehdr *e) + + if (grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3") == 0 + || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3+") == 0 +- || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0) ++ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0 ++ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=CC0") == 0) + return GRUB_ERR_NONE; + + return grub_error (GRUB_ERR_BAD_MODULE, +diff --git a/util/grub-module-verifierXX.c b/util/grub-module-verifierXX.c +index a42c20bd1..7157a30aa 100644 +--- a/util/grub-module-verifierXX.c ++++ b/util/grub-module-verifierXX.c +@@ -236,7 +236,8 @@ check_license (const char * const filename, + Elf_Shdr *s = find_section (arch, e, ".module_license", module_size); + if (s && (strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3") == 0 + || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3+") == 0 +- || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0)) ++ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0 ++ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=CC0") == 0)) + return; + grub_util_error ("%s: incompatible license", filename); + } +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch b/config/grub/xhci/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch new file mode 100644 index 00000000..be875e67 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch @@ -0,0 +1,39 @@ +From 9edaaffac91d593a439e44bac3b6f5558f5a8245 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 2/6] Define GRUB_UINT32_MAX + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + include/grub/types.h | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/include/grub/types.h b/include/grub/types.h +index 0d96006fe..a13f3a60b 100644 +--- a/include/grub/types.h ++++ b/include/grub/types.h +@@ -156,6 +156,7 @@ typedef grub_int32_t grub_ssize_t; + #define GRUB_SHRT_MAX 0x7fff + #define GRUB_SHRT_MIN (-GRUB_SHRT_MAX - 1) + #define GRUB_UINT_MAX 4294967295U ++#define GRUB_UINT32_MAX 4294967295U + #define GRUB_INT_MAX 0x7fffffff + #define GRUB_INT_MIN (-GRUB_INT_MAX - 1) + #define GRUB_INT32_MAX 2147483647 +@@ -177,6 +178,13 @@ typedef grub_int32_t grub_ssize_t; + #define GRUB_TYPE_U_MAX(type) ((unsigned long long)((typeof (type))(~0))) + #define GRUB_TYPE_U_MIN(type) 0ULL + ++# define GRUB_UINT32_C(x) x ## U ++# if GRUB_ULONG_MAX >> 31 >> 31 >> 1 == 1 ++# define GRUB_UINT64_C(x) x##UL ++# elif 1 ++# define GRUB_UINT64_C(x) x##ULL ++# endif ++ + typedef grub_uint64_t grub_properly_aligned_t; + + #define GRUB_PROPERLY_ALIGNED_ARRAY(name, size) grub_properly_aligned_t name[((size) + sizeof (grub_properly_aligned_t) - 1) / sizeof (grub_properly_aligned_t)] +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0005-Add-Argon2-algorithm.patch b/config/grub/xhci/patches/0002-luks2/0005-Add-Argon2-algorithm.patch new file mode 100644 index 00000000..1c6b4f04 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0005-Add-Argon2-algorithm.patch @@ -0,0 +1,2611 @@ +From 5b63da5c4267933f573ca37ce39a073098c443ba Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 3/6] Add Argon2 algorithm + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + docs/grub-dev.texi | 64 +++ + grub-core/Makefile.core.def | 8 + + grub-core/lib/argon2/LICENSE | 314 +++++++++++ + grub-core/lib/argon2/argon2.c | 232 ++++++++ + grub-core/lib/argon2/argon2.h | 264 +++++++++ + grub-core/lib/argon2/blake2/blake2-impl.h | 151 ++++++ + grub-core/lib/argon2/blake2/blake2.h | 89 +++ + grub-core/lib/argon2/blake2/blake2b.c | 388 ++++++++++++++ + .../lib/argon2/blake2/blamka-round-ref.h | 56 ++ + grub-core/lib/argon2/core.c | 506 ++++++++++++++++++ + grub-core/lib/argon2/core.h | 228 ++++++++ + grub-core/lib/argon2/ref.c | 190 +++++++ + 12 files changed, 2490 insertions(+) + create mode 100644 grub-core/lib/argon2/LICENSE + create mode 100644 grub-core/lib/argon2/argon2.c + create mode 100644 grub-core/lib/argon2/argon2.h + create mode 100644 grub-core/lib/argon2/blake2/blake2-impl.h + create mode 100644 grub-core/lib/argon2/blake2/blake2.h + create mode 100644 grub-core/lib/argon2/blake2/blake2b.c + create mode 100644 grub-core/lib/argon2/blake2/blamka-round-ref.h + create mode 100644 grub-core/lib/argon2/core.c + create mode 100644 grub-core/lib/argon2/core.h + create mode 100644 grub-core/lib/argon2/ref.c + +diff --git a/docs/grub-dev.texi b/docs/grub-dev.texi +index a695b02f0..313335a53 100644 +--- a/docs/grub-dev.texi ++++ b/docs/grub-dev.texi +@@ -503,11 +503,75 @@ GRUB includes some code from other projects, and it is sometimes necessary + to update it. + + @menu ++* Argon2:: + * Gnulib:: + * jsmn:: + * minilzo:: + @end menu + ++@node Argon2 ++@section Argon2 ++ ++Argon2 is a key derivation function used by LUKS2 in order to derive encryption ++keys from a user-provided password. GRUB imports the official reference ++implementation of Argon2 from @url{https://github.com/P-H-C/phc-winner-argon2}. ++In order to make the library usable for GRUB, we need to perform various ++conversions. This is mainly due to the fact that the imported code makes use of ++types and functions defined in the C standard library, which isn't available. ++Furthermore, using the POSIX wrapper library is not possible as the code needs ++to be part of the kernel. ++ ++Updating the code can thus be performed like following: ++ ++@example ++$ git clone https://github.com/P-H-C/phc-winner-argon2 argon2 ++$ cp argon2/include/argon2.h argon2/src/@{argon2.c,core.c,core.h,ref.c@} \ ++ grub-core/lib/argon2/ ++$ cp argon2/src/blake2/@{blake2-impl.h,blake2.h,blake2b.c,blamka-round-ref.h@} \ ++ grub-core/lib/argon2/blake2/ ++$ sed -e 's/UINT32_C/GRUB_UINT32_C/g' \ ++ -e 's/UINT64_C/GRUB_UINT64_C/g' \ ++ -e 's/UINT32_MAX/GRUB_UINT32_MAX/g' \ ++ -e 's/CHAR_BIT/GRUB_CHAR_BIT/g' \ ++ -e 's/UINT_MAX/GRUB_UINT_MAX/g' \ ++ -e 's/uintptr_t/grub_addr_t/g' \ ++ -e 's/size_t/grub_size_t/g' \ ++ -e 's/uint32_t/grub_uint32_t/g' \ ++ -e 's/uint64_t/grub_uint64_t/g' \ ++ -e 's/uint8_t/grub_uint8_t/g' \ ++ -e 's/memset/grub_memset/g' \ ++ -e 's/memcpy/grub_memcpy/g' \ ++ -e 's/malloc/grub_malloc/g' \ ++ -e 's/free/grub_free/g' \ ++ -e 's/#elif _MSC_VER/#elif defined(_MSC_VER)/' \ ++ grub-core/lib/argon2/@{*,blake2/*@}.@{c,h@} -i ++@end example ++ ++Afterwards, you need to perform the following manual steps: ++ ++@enumerate ++@item Remove all includes of standard library headers, "encoding.h" and ++ "thread.h". ++@item Add includes <grub/mm.h> and <grub/misc.h> to "argon2.h". ++@item Add include <grub/dl.h> and module license declaration to "argon2.c". ++@item Remove the following declarations and functions from "argon2.h" and ++ "argon2.c": argon2_type2string, argon2i_hash_encoded, argon2i_hash_raw, ++ argon2d_hash_encoded, argon2d_hash_raw, argon2id_hash_encoded, ++ argon2id_hash_raw, argon2_compare, argon2_verify, argon2i_verify, ++ argon2d_verify, argon2id_verify, argon2d_ctx, argon2i_ctx, argon2id_ctx, ++ argon2_verify_ctx, argon2d_verify_ctx, argon2i_verify_ctx, ++ argon2id_verify_ctx, argon2_encodedlen. ++@item Move the declaration of `clear_internal_memory()` in "blake2-impl.h" to ++ "blake2b.c". ++@item Remove code guarded by the ARGON2_NO_THREADS macro. ++@item Remove parameters `encoded` and `encodedlen` from `argon2_hash` and remove ++ the encoding block in that function. ++@item Remove parameter verifications in `validate_inputs()` for ++ ARGON2_MIN_PWD_LENGTH, ARGON2_MIN_SECRET, ARGON2_MIN_AD_LENGTH and ++ ARGON2_MAX_MEMORY to fix compiler warnings. ++@item Mark the function argon2_ctx as static. ++@end enumerate ++ + @node Gnulib + @section Gnulib + +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index d2cf29584..4a06789e5 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -1215,6 +1215,14 @@ module = { + common = lib/json/json.c; + }; + ++module = { ++ name = argon2; ++ common = lib/argon2/argon2.c; ++ common = lib/argon2/core.c; ++ common = lib/argon2/ref.c; ++ common = lib/argon2/blake2/blake2b.c; ++}; ++ + module = { + name = afsplitter; + common = disk/AFSplitter.c; +diff --git a/grub-core/lib/argon2/LICENSE b/grub-core/lib/argon2/LICENSE +new file mode 100644 +index 000000000..97aae2925 +--- /dev/null ++++ b/grub-core/lib/argon2/LICENSE +@@ -0,0 +1,314 @@ ++Argon2 reference source code package - reference C implementations ++ ++Copyright 2015 ++Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ ++You may use this work under the terms of a Creative Commons CC0 1.0 ++License/Waiver or the Apache Public License 2.0, at your option. The terms of ++these licenses can be found at: ++ ++- CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++- Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ ++The terms of the licenses are reproduced below. ++ ++-------------------------------------------------------------------------------- ++ ++Creative Commons Legal Code ++ ++CC0 1.0 Universal ++ ++ CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE ++ LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN ++ ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS ++ INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES ++ REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS ++ PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM ++ THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED ++ HEREUNDER. ++ ++Statement of Purpose ++ ++The laws of most jurisdictions throughout the world automatically confer ++exclusive Copyright and Related Rights (defined below) upon the creator ++and subsequent owner(s) (each and all, an "owner") of an original work of ++authorship and/or a database (each, a "Work"). ++ ++Certain owners wish to permanently relinquish those rights to a Work for ++the purpose of contributing to a commons of creative, cultural and ++scientific works ("Commons") that the public can reliably and without fear ++of later claims of infringement build upon, modify, incorporate in other ++works, reuse and redistribute as freely as possible in any form whatsoever ++and for any purposes, including without limitation commercial purposes. ++These owners may contribute to the Commons to promote the ideal of a free ++culture and the further production of creative, cultural and scientific ++works, or to gain reputation or greater distribution for their Work in ++part through the use and efforts of others. ++ ++For these and/or other purposes and motivations, and without any ++expectation of additional consideration or compensation, the person ++associating CC0 with a Work (the "Affirmer"), to the extent that he or she ++is an owner of Copyright and Related Rights in the Work, voluntarily ++elects to apply CC0 to the Work and publicly distribute the Work under its ++terms, with knowledge of his or her Copyright and Related Rights in the ++Work and the meaning and intended legal effect of CC0 on those rights. ++ ++1. Copyright and Related Rights. A Work made available under CC0 may be ++protected by copyright and related or neighboring rights ("Copyright and ++Related Rights"). Copyright and Related Rights include, but are not ++limited to, the following: ++ ++ i. the right to reproduce, adapt, distribute, perform, display, ++ communicate, and translate a Work; ++ ii. moral rights retained by the original author(s) and/or performer(s); ++iii. publicity and privacy rights pertaining to a person's image or ++ likeness depicted in a Work; ++ iv. rights protecting against unfair competition in regards to a Work, ++ subject to the limitations in paragraph 4(a), below; ++ v. rights protecting the extraction, dissemination, use and reuse of data ++ in a Work; ++ vi. database rights (such as those arising under Directive 96/9/EC of the ++ European Parliament and of the Council of 11 March 1996 on the legal ++ protection of databases, and under any national implementation ++ thereof, including any amended or successor version of such ++ directive); and ++vii. other similar, equivalent or corresponding rights throughout the ++ world based on applicable law or treaty, and any national ++ implementations thereof. ++ ++2. Waiver. To the greatest extent permitted by, but not in contravention ++of, applicable law, Affirmer hereby overtly, fully, permanently, ++irrevocably and unconditionally waives, abandons, and surrenders all of ++Affirmer's Copyright and Related Rights and associated claims and causes ++of action, whether now known or unknown (including existing as well as ++future claims and causes of action), in the Work (i) in all territories ++worldwide, (ii) for the maximum duration provided by applicable law or ++treaty (including future time extensions), (iii) in any current or future ++medium and for any number of copies, and (iv) for any purpose whatsoever, ++including without limitation commercial, advertising or promotional ++purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each ++member of the public at large and to the detriment of Affirmer's heirs and ++successors, fully intending that such Waiver shall not be subject to ++revocation, rescission, cancellation, termination, or any other legal or ++equitable action to disrupt the quiet enjoyment of the Work by the public ++as contemplated by Affirmer's express Statement of Purpose. ++ ++3. Public License Fallback. Should any part of the Waiver for any reason ++be judged legally invalid or ineffective under applicable law, then the ++Waiver shall be preserved to the maximum extent permitted taking into ++account Affirmer's express Statement of Purpose. In addition, to the ++extent the Waiver is so judged Affirmer hereby grants to each affected ++person a royalty-free, non transferable, non sublicensable, non exclusive, ++irrevocable and unconditional license to exercise Affirmer's Copyright and ++Related Rights in the Work (i) in all territories worldwide, (ii) for the ++maximum duration provided by applicable law or treaty (including future ++time extensions), (iii) in any current or future medium and for any number ++of copies, and (iv) for any purpose whatsoever, including without ++limitation commercial, advertising or promotional purposes (the ++"License"). The License shall be deemed effective as of the date CC0 was ++applied by Affirmer to the Work. Should any part of the License for any ++reason be judged legally invalid or ineffective under applicable law, such ++partial invalidity or ineffectiveness shall not invalidate the remainder ++of the License, and in such case Affirmer hereby affirms that he or she ++will not (i) exercise any of his or her remaining Copyright and Related ++Rights in the Work or (ii) assert any associated claims and causes of ++action with respect to the Work, in either case contrary to Affirmer's ++express Statement of Purpose. ++ ++4. Limitations and Disclaimers. ++ ++ a. No trademark or patent rights held by Affirmer are waived, abandoned, ++ surrendered, licensed or otherwise affected by this document. ++ b. Affirmer offers the Work as-is and makes no representations or ++ warranties of any kind concerning the Work, express, implied, ++ statutory or otherwise, including without limitation warranties of ++ title, merchantability, fitness for a particular purpose, non ++ infringement, or the absence of latent or other defects, accuracy, or ++ the present or absence of errors, whether or not discoverable, all to ++ the greatest extent permissible under applicable law. ++ c. Affirmer disclaims responsibility for clearing rights of other persons ++ that may apply to the Work or any use thereof, including without ++ limitation any person's Copyright and Related Rights in the Work. ++ Further, Affirmer disclaims responsibility for obtaining any necessary ++ consents, permissions or other rights required for any use of the ++ Work. ++ d. Affirmer understands and acknowledges that Creative Commons is not a ++ party to this document and has no duty or obligation with respect to ++ this CC0 or use of the Work. ++ ++-------------------------------------------------------------------------------- ++ ++ Apache License ++ Version 2.0, January 2004 ++ http://www.apache.org/licenses/ ++ ++ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION ++ ++ 1. Definitions. ++ ++ "License" shall mean the terms and conditions for use, reproduction, ++ and distribution as defined by Sections 1 through 9 of this document. ++ ++ "Licensor" shall mean the copyright owner or entity authorized by ++ the copyright owner that is granting the License. ++ ++ "Legal Entity" shall mean the union of the acting entity and all ++ other entities that control, are controlled by, or are under common ++ control with that entity. For the purposes of this definition, ++ "control" means (i) the power, direct or indirect, to cause the ++ direction or management of such entity, whether by contract or ++ otherwise, or (ii) ownership of fifty percent (50%) or more of the ++ outstanding shares, or (iii) beneficial ownership of such entity. ++ ++ "You" (or "Your") shall mean an individual or Legal Entity ++ exercising permissions granted by this License. ++ ++ "Source" form shall mean the preferred form for making modifications, ++ including but not limited to software source code, documentation ++ source, and configuration files. ++ ++ "Object" form shall mean any form resulting from mechanical ++ transformation or translation of a Source form, including but ++ not limited to compiled object code, generated documentation, ++ and conversions to other media types. ++ ++ "Work" shall mean the work of authorship, whether in Source or ++ Object form, made available under the License, as indicated by a ++ copyright notice that is included in or attached to the work ++ (an example is provided in the Appendix below). ++ ++ "Derivative Works" shall mean any work, whether in Source or Object ++ form, that is based on (or derived from) the Work and for which the ++ editorial revisions, annotations, elaborations, or other modifications ++ represent, as a whole, an original work of authorship. For the purposes ++ of this License, Derivative Works shall not include works that remain ++ separable from, or merely link (or bind by name) to the interfaces of, ++ the Work and Derivative Works thereof. ++ ++ "Contribution" shall mean any work of authorship, including ++ the original version of the Work and any modifications or additions ++ to that Work or Derivative Works thereof, that is intentionally ++ submitted to Licensor for inclusion in the Work by the copyright owner ++ or by an individual or Legal Entity authorized to submit on behalf of ++ the copyright owner. For the purposes of this definition, "submitted" ++ means any form of electronic, verbal, or written communication sent ++ to the Licensor or its representatives, including but not limited to ++ communication on electronic mailing lists, source code control systems, ++ and issue tracking systems that are managed by, or on behalf of, the ++ Licensor for the purpose of discussing and improving the Work, but ++ excluding communication that is conspicuously marked or otherwise ++ designated in writing by the copyright owner as "Not a Contribution." ++ ++ "Contributor" shall mean Licensor and any individual or Legal Entity ++ on behalf of whom a Contribution has been received by Licensor and ++ subsequently incorporated within the Work. ++ ++ 2. Grant of Copyright License. Subject to the terms and conditions of ++ this License, each Contributor hereby grants to You a perpetual, ++ worldwide, non-exclusive, no-charge, royalty-free, irrevocable ++ copyright license to reproduce, prepare Derivative Works of, ++ publicly display, publicly perform, sublicense, and distribute the ++ Work and such Derivative Works in Source or Object form. ++ ++ 3. Grant of Patent License. Subject to the terms and conditions of ++ this License, each Contributor hereby grants to You a perpetual, ++ worldwide, non-exclusive, no-charge, royalty-free, irrevocable ++ (except as stated in this section) patent license to make, have made, ++ use, offer to sell, sell, import, and otherwise transfer the Work, ++ where such license applies only to those patent claims licensable ++ by such Contributor that are necessarily infringed by their ++ Contribution(s) alone or by combination of their Contribution(s) ++ with the Work to which such Contribution(s) was submitted. If You ++ institute patent litigation against any entity (including a ++ cross-claim or counterclaim in a lawsuit) alleging that the Work ++ or a Contribution incorporated within the Work constitutes direct ++ or contributory patent infringement, then any patent licenses ++ granted to You under this License for that Work shall terminate ++ as of the date such litigation is filed. ++ ++ 4. Redistribution. You may reproduce and distribute copies of the ++ Work or Derivative Works thereof in any medium, with or without ++ modifications, and in Source or Object form, provided that You ++ meet the following conditions: ++ ++ (a) You must give any other recipients of the Work or ++ Derivative Works a copy of this License; and ++ ++ (b) You must cause any modified files to carry prominent notices ++ stating that You changed the files; and ++ ++ (c) You must retain, in the Source form of any Derivative Works ++ that You distribute, all copyright, patent, trademark, and ++ attribution notices from the Source form of the Work, ++ excluding those notices that do not pertain to any part of ++ the Derivative Works; and ++ ++ (d) If the Work includes a "NOTICE" text file as part of its ++ distribution, then any Derivative Works that You distribute must ++ include a readable copy of the attribution notices contained ++ within such NOTICE file, excluding those notices that do not ++ pertain to any part of the Derivative Works, in at least one ++ of the following places: within a NOTICE text file distributed ++ as part of the Derivative Works; within the Source form or ++ documentation, if provided along with the Derivative Works; or, ++ within a display generated by the Derivative Works, if and ++ wherever such third-party notices normally appear. The contents ++ of the NOTICE file are for informational purposes only and ++ do not modify the License. You may add Your own attribution ++ notices within Derivative Works that You distribute, alongside ++ or as an addendum to the NOTICE text from the Work, provided ++ that such additional attribution notices cannot be construed ++ as modifying the License. ++ ++ You may add Your own copyright statement to Your modifications and ++ may provide additional or different license terms and conditions ++ for use, reproduction, or distribution of Your modifications, or ++ for any such Derivative Works as a whole, provided Your use, ++ reproduction, and distribution of the Work otherwise complies with ++ the conditions stated in this License. ++ ++ 5. Submission of Contributions. Unless You explicitly state otherwise, ++ any Contribution intentionally submitted for inclusion in the Work ++ by You to the Licensor shall be under the terms and conditions of ++ this License, without any additional terms or conditions. ++ Notwithstanding the above, nothing herein shall supersede or modify ++ the terms of any separate license agreement you may have executed ++ with Licensor regarding such Contributions. ++ ++ 6. Trademarks. This License does not grant permission to use the trade ++ names, trademarks, service marks, or product names of the Licensor, ++ except as required for reasonable and customary use in describing the ++ origin of the Work and reproducing the content of the NOTICE file. ++ ++ 7. Disclaimer of Warranty. Unless required by applicable law or ++ agreed to in writing, Licensor provides the Work (and each ++ Contributor provides its Contributions) on an "AS IS" BASIS, ++ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or ++ implied, including, without limitation, any warranties or conditions ++ of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A ++ PARTICULAR PURPOSE. You are solely responsible for determining the ++ appropriateness of using or redistributing the Work and assume any ++ risks associated with Your exercise of permissions under this License. ++ ++ 8. Limitation of Liability. In no event and under no legal theory, ++ whether in tort (including negligence), contract, or otherwise, ++ unless required by applicable law (such as deliberate and grossly ++ negligent acts) or agreed to in writing, shall any Contributor be ++ liable to You for damages, including any direct, indirect, special, ++ incidental, or consequential damages of any character arising as a ++ result of this License or out of the use or inability to use the ++ Work (including but not limited to damages for loss of goodwill, ++ work stoppage, computer failure or malfunction, or any and all ++ other commercial damages or losses), even if such Contributor ++ has been advised of the possibility of such damages. ++ ++ 9. Accepting Warranty or Additional Liability. While redistributing ++ the Work or Derivative Works thereof, You may choose to offer, ++ and charge a fee for, acceptance of support, warranty, indemnity, ++ or other liability obligations and/or rights consistent with this ++ License. However, in accepting such obligations, You may act only ++ on Your own behalf and on Your sole responsibility, not on behalf ++ of any other Contributor, and only if You agree to indemnify, ++ defend, and hold each Contributor harmless for any liability ++ incurred by, or claims asserted against, such Contributor by reason ++ of your accepting any such warranty or additional liability. +diff --git a/grub-core/lib/argon2/argon2.c b/grub-core/lib/argon2/argon2.c +new file mode 100644 +index 000000000..49532fe80 +--- /dev/null ++++ b/grub-core/lib/argon2/argon2.c +@@ -0,0 +1,232 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#include <grub/dl.h> ++ ++#include "argon2.h" ++#include "core.h" ++ ++GRUB_MOD_LICENSE ("CC0"); ++ ++static int argon2_ctx(argon2_context *context, argon2_type type) { ++ /* 1. Validate all inputs */ ++ int result = validate_inputs(context); ++ grub_uint32_t memory_blocks, segment_length; ++ argon2_instance_t instance; ++ ++ if (ARGON2_OK != result) { ++ return result; ++ } ++ ++ if (Argon2_d != type && Argon2_i != type && Argon2_id != type) { ++ return ARGON2_INCORRECT_TYPE; ++ } ++ ++ /* 2. Align memory size */ ++ /* Minimum memory_blocks = 8L blocks, where L is the number of lanes */ ++ memory_blocks = context->m_cost; ++ ++ if (memory_blocks < 2 * ARGON2_SYNC_POINTS * context->lanes) { ++ memory_blocks = 2 * ARGON2_SYNC_POINTS * context->lanes; ++ } ++ ++ segment_length = memory_blocks / (context->lanes * ARGON2_SYNC_POINTS); ++ /* Ensure that all segments have equal length */ ++ memory_blocks = segment_length * (context->lanes * ARGON2_SYNC_POINTS); ++ ++ instance.version = context->version; ++ instance.memory = NULL; ++ instance.passes = context->t_cost; ++ instance.memory_blocks = memory_blocks; ++ instance.segment_length = segment_length; ++ instance.lane_length = segment_length * ARGON2_SYNC_POINTS; ++ instance.lanes = context->lanes; ++ instance.threads = context->threads; ++ instance.type = type; ++ ++ if (instance.threads > instance.lanes) { ++ instance.threads = instance.lanes; ++ } ++ ++ /* 3. Initialization: Hashing inputs, allocating memory, filling first ++ * blocks ++ */ ++ result = initialize(&instance, context); ++ ++ if (ARGON2_OK != result) { ++ return result; ++ } ++ ++ /* 4. Filling memory */ ++ result = fill_memory_blocks(&instance); ++ ++ if (ARGON2_OK != result) { ++ return result; ++ } ++ /* 5. Finalization */ ++ finalize(context, &instance); ++ ++ return ARGON2_OK; ++} ++ ++int argon2_hash(const grub_uint32_t t_cost, const grub_uint32_t m_cost, ++ const grub_uint32_t parallelism, const void *pwd, ++ const grub_size_t pwdlen, const void *salt, const grub_size_t saltlen, ++ void *hash, const grub_size_t hashlen, argon2_type type, ++ const grub_uint32_t version){ ++ ++ argon2_context context; ++ int result; ++ grub_uint8_t *out; ++ ++ if (pwdlen > ARGON2_MAX_PWD_LENGTH) { ++ return ARGON2_PWD_TOO_LONG; ++ } ++ ++ if (saltlen > ARGON2_MAX_SALT_LENGTH) { ++ return ARGON2_SALT_TOO_LONG; ++ } ++ ++ if (hashlen > ARGON2_MAX_OUTLEN) { ++ return ARGON2_OUTPUT_TOO_LONG; ++ } ++ ++ if (hashlen < ARGON2_MIN_OUTLEN) { ++ return ARGON2_OUTPUT_TOO_SHORT; ++ } ++ ++ out = grub_malloc(hashlen); ++ if (!out) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ context.out = (grub_uint8_t *)out; ++ context.outlen = (grub_uint32_t)hashlen; ++ context.pwd = CONST_CAST(grub_uint8_t *)pwd; ++ context.pwdlen = (grub_uint32_t)pwdlen; ++ context.salt = CONST_CAST(grub_uint8_t *)salt; ++ context.saltlen = (grub_uint32_t)saltlen; ++ context.secret = NULL; ++ context.secretlen = 0; ++ context.ad = NULL; ++ context.adlen = 0; ++ context.t_cost = t_cost; ++ context.m_cost = m_cost; ++ context.lanes = parallelism; ++ context.threads = parallelism; ++ context.allocate_cbk = NULL; ++ context.grub_free_cbk = NULL; ++ context.flags = ARGON2_DEFAULT_FLAGS; ++ context.version = version; ++ ++ result = argon2_ctx(&context, type); ++ ++ if (result != ARGON2_OK) { ++ clear_internal_memory(out, hashlen); ++ grub_free(out); ++ return result; ++ } ++ ++ /* if raw hash requested, write it */ ++ if (hash) { ++ grub_memcpy(hash, out, hashlen); ++ } ++ ++ clear_internal_memory(out, hashlen); ++ grub_free(out); ++ ++ return ARGON2_OK; ++} ++ ++const char *argon2_error_message(int error_code) { ++ switch (error_code) { ++ case ARGON2_OK: ++ return "OK"; ++ case ARGON2_OUTPUT_PTR_NULL: ++ return "Output pointer is NULL"; ++ case ARGON2_OUTPUT_TOO_SHORT: ++ return "Output is too short"; ++ case ARGON2_OUTPUT_TOO_LONG: ++ return "Output is too long"; ++ case ARGON2_PWD_TOO_SHORT: ++ return "Password is too short"; ++ case ARGON2_PWD_TOO_LONG: ++ return "Password is too long"; ++ case ARGON2_SALT_TOO_SHORT: ++ return "Salt is too short"; ++ case ARGON2_SALT_TOO_LONG: ++ return "Salt is too long"; ++ case ARGON2_AD_TOO_SHORT: ++ return "Associated data is too short"; ++ case ARGON2_AD_TOO_LONG: ++ return "Associated data is too long"; ++ case ARGON2_SECRET_TOO_SHORT: ++ return "Secret is too short"; ++ case ARGON2_SECRET_TOO_LONG: ++ return "Secret is too long"; ++ case ARGON2_TIME_TOO_SMALL: ++ return "Time cost is too small"; ++ case ARGON2_TIME_TOO_LARGE: ++ return "Time cost is too large"; ++ case ARGON2_MEMORY_TOO_LITTLE: ++ return "Memory cost is too small"; ++ case ARGON2_MEMORY_TOO_MUCH: ++ return "Memory cost is too large"; ++ case ARGON2_LANES_TOO_FEW: ++ return "Too few lanes"; ++ case ARGON2_LANES_TOO_MANY: ++ return "Too many lanes"; ++ case ARGON2_PWD_PTR_MISMATCH: ++ return "Password pointer is NULL, but password length is not 0"; ++ case ARGON2_SALT_PTR_MISMATCH: ++ return "Salt pointer is NULL, but salt length is not 0"; ++ case ARGON2_SECRET_PTR_MISMATCH: ++ return "Secret pointer is NULL, but secret length is not 0"; ++ case ARGON2_AD_PTR_MISMATCH: ++ return "Associated data pointer is NULL, but ad length is not 0"; ++ case ARGON2_MEMORY_ALLOCATION_ERROR: ++ return "Memory allocation error"; ++ case ARGON2_FREE_MEMORY_CBK_NULL: ++ return "The grub_free memory callback is NULL"; ++ case ARGON2_ALLOCATE_MEMORY_CBK_NULL: ++ return "The allocate memory callback is NULL"; ++ case ARGON2_INCORRECT_PARAMETER: ++ return "Argon2_Context context is NULL"; ++ case ARGON2_INCORRECT_TYPE: ++ return "There is no such version of Argon2"; ++ case ARGON2_OUT_PTR_MISMATCH: ++ return "Output pointer mismatch"; ++ case ARGON2_THREADS_TOO_FEW: ++ return "Not enough threads"; ++ case ARGON2_THREADS_TOO_MANY: ++ return "Too many threads"; ++ case ARGON2_MISSING_ARGS: ++ return "Missing arguments"; ++ case ARGON2_ENCODING_FAIL: ++ return "Encoding failed"; ++ case ARGON2_DECODING_FAIL: ++ return "Decoding failed"; ++ case ARGON2_THREAD_FAIL: ++ return "Threading failure"; ++ case ARGON2_DECODING_LENGTH_FAIL: ++ return "Some of encoded parameters are too long or too short"; ++ case ARGON2_VERIFY_MISMATCH: ++ return "The password does not match the supplied hash"; ++ default: ++ return "Unknown error code"; ++ } ++} +diff --git a/grub-core/lib/argon2/argon2.h b/grub-core/lib/argon2/argon2.h +new file mode 100644 +index 000000000..129f7efbd +--- /dev/null ++++ b/grub-core/lib/argon2/argon2.h +@@ -0,0 +1,264 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef ARGON2_H ++#define ARGON2_H ++ ++#include <grub/misc.h> ++#include <grub/mm.h> ++ ++#if defined(__cplusplus) ++extern "C" { ++#endif ++ ++/* Symbols visibility control */ ++#ifdef A2_VISCTL ++#define ARGON2_PUBLIC __attribute__((visibility("default"))) ++#define ARGON2_LOCAL __attribute__ ((visibility ("hidden"))) ++#elif defined(_MSC_VER) ++#define ARGON2_PUBLIC __declspec(dllexport) ++#define ARGON2_LOCAL ++#else ++#define ARGON2_PUBLIC ++#define ARGON2_LOCAL ++#endif ++ ++/* ++ * Argon2 input parameter restrictions ++ */ ++ ++/* Minimum and maximum number of lanes (degree of parallelism) */ ++#define ARGON2_MIN_LANES GRUB_UINT32_C(1) ++#define ARGON2_MAX_LANES GRUB_UINT32_C(0xFFFFFF) ++ ++/* Minimum and maximum number of threads */ ++#define ARGON2_MIN_THREADS GRUB_UINT32_C(1) ++#define ARGON2_MAX_THREADS GRUB_UINT32_C(0xFFFFFF) ++ ++/* Number of synchronization points between lanes per pass */ ++#define ARGON2_SYNC_POINTS GRUB_UINT32_C(4) ++ ++/* Minimum and maximum digest size in bytes */ ++#define ARGON2_MIN_OUTLEN GRUB_UINT32_C(4) ++#define ARGON2_MAX_OUTLEN GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum number of memory blocks (each of BLOCK_SIZE bytes) */ ++#define ARGON2_MIN_MEMORY (2 * ARGON2_SYNC_POINTS) /* 2 blocks per slice */ ++ ++#define ARGON2_MIN(a, b) ((a) < (b) ? (a) : (b)) ++/* Max memory size is addressing-space/2, topping at 2^32 blocks (4 TB) */ ++#define ARGON2_MAX_MEMORY_BITS \ ++ ARGON2_MIN(GRUB_UINT32_C(32), (sizeof(void *) * GRUB_CHAR_BIT - 10 - 1)) ++#define ARGON2_MAX_MEMORY \ ++ ARGON2_MIN(GRUB_UINT32_C(0xFFFFFFFF), GRUB_UINT64_C(1) << ARGON2_MAX_MEMORY_BITS) ++ ++/* Minimum and maximum number of passes */ ++#define ARGON2_MIN_TIME GRUB_UINT32_C(1) ++#define ARGON2_MAX_TIME GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum password length in bytes */ ++#define ARGON2_MIN_PWD_LENGTH GRUB_UINT32_C(0) ++#define ARGON2_MAX_PWD_LENGTH GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum associated data length in bytes */ ++#define ARGON2_MIN_AD_LENGTH GRUB_UINT32_C(0) ++#define ARGON2_MAX_AD_LENGTH GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum salt length in bytes */ ++#define ARGON2_MIN_SALT_LENGTH GRUB_UINT32_C(8) ++#define ARGON2_MAX_SALT_LENGTH GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum key length in bytes */ ++#define ARGON2_MIN_SECRET GRUB_UINT32_C(0) ++#define ARGON2_MAX_SECRET GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Flags to determine which fields are securely wiped (default = no wipe). */ ++#define ARGON2_DEFAULT_FLAGS GRUB_UINT32_C(0) ++#define ARGON2_FLAG_CLEAR_PASSWORD (GRUB_UINT32_C(1) << 0) ++#define ARGON2_FLAG_CLEAR_SECRET (GRUB_UINT32_C(1) << 1) ++ ++/* Global flag to determine if we are wiping internal memory buffers. This flag ++ * is defined in core.c and defaults to 1 (wipe internal memory). */ ++extern int FLAG_clear_internal_memory; ++ ++/* Error codes */ ++typedef enum Argon2_ErrorCodes { ++ ARGON2_OK = 0, ++ ++ ARGON2_OUTPUT_PTR_NULL = -1, ++ ++ ARGON2_OUTPUT_TOO_SHORT = -2, ++ ARGON2_OUTPUT_TOO_LONG = -3, ++ ++ ARGON2_PWD_TOO_SHORT = -4, ++ ARGON2_PWD_TOO_LONG = -5, ++ ++ ARGON2_SALT_TOO_SHORT = -6, ++ ARGON2_SALT_TOO_LONG = -7, ++ ++ ARGON2_AD_TOO_SHORT = -8, ++ ARGON2_AD_TOO_LONG = -9, ++ ++ ARGON2_SECRET_TOO_SHORT = -10, ++ ARGON2_SECRET_TOO_LONG = -11, ++ ++ ARGON2_TIME_TOO_SMALL = -12, ++ ARGON2_TIME_TOO_LARGE = -13, ++ ++ ARGON2_MEMORY_TOO_LITTLE = -14, ++ ARGON2_MEMORY_TOO_MUCH = -15, ++ ++ ARGON2_LANES_TOO_FEW = -16, ++ ARGON2_LANES_TOO_MANY = -17, ++ ++ ARGON2_PWD_PTR_MISMATCH = -18, /* NULL ptr with non-zero length */ ++ ARGON2_SALT_PTR_MISMATCH = -19, /* NULL ptr with non-zero length */ ++ ARGON2_SECRET_PTR_MISMATCH = -20, /* NULL ptr with non-zero length */ ++ ARGON2_AD_PTR_MISMATCH = -21, /* NULL ptr with non-zero length */ ++ ++ ARGON2_MEMORY_ALLOCATION_ERROR = -22, ++ ++ ARGON2_FREE_MEMORY_CBK_NULL = -23, ++ ARGON2_ALLOCATE_MEMORY_CBK_NULL = -24, ++ ++ ARGON2_INCORRECT_PARAMETER = -25, ++ ARGON2_INCORRECT_TYPE = -26, ++ ++ ARGON2_OUT_PTR_MISMATCH = -27, ++ ++ ARGON2_THREADS_TOO_FEW = -28, ++ ARGON2_THREADS_TOO_MANY = -29, ++ ++ ARGON2_MISSING_ARGS = -30, ++ ++ ARGON2_ENCODING_FAIL = -31, ++ ++ ARGON2_DECODING_FAIL = -32, ++ ++ ARGON2_THREAD_FAIL = -33, ++ ++ ARGON2_DECODING_LENGTH_FAIL = -34, ++ ++ ARGON2_VERIFY_MISMATCH = -35 ++} argon2_error_codes; ++ ++/* Memory allocator types --- for external allocation */ ++typedef int (*allocate_fptr)(grub_uint8_t **memory, grub_size_t bytes_to_allocate); ++typedef void (*deallocate_fptr)(grub_uint8_t *memory, grub_size_t bytes_to_allocate); ++ ++/* Argon2 external data structures */ ++ ++/* ++ ***** ++ * Context: structure to hold Argon2 inputs: ++ * output array and its length, ++ * password and its length, ++ * salt and its length, ++ * secret and its length, ++ * associated data and its length, ++ * number of passes, amount of used memory (in KBytes, can be rounded up a bit) ++ * number of parallel threads that will be run. ++ * All the parameters above affect the output hash value. ++ * Additionally, two function pointers can be provided to allocate and ++ * deallocate the memory (if NULL, memory will be allocated internally). ++ * Also, three flags indicate whether to erase password, secret as soon as they ++ * are pre-hashed (and thus not needed anymore), and the entire memory ++ ***** ++ * Simplest situation: you have output array out[8], password is stored in ++ * pwd[32], salt is stored in salt[16], you do not have keys nor associated ++ * data. You need to spend 1 GB of RAM and you run 5 passes of Argon2d with ++ * 4 parallel lanes. ++ * You want to erase the password, but you're OK with last pass not being ++ * erased. You want to use the default memory allocator. ++ * Then you initialize: ++ Argon2_Context(out,8,pwd,32,salt,16,NULL,0,NULL,0,5,1<<20,4,4,NULL,NULL,true,false,false,false) ++ */ ++typedef struct Argon2_Context { ++ grub_uint8_t *out; /* output array */ ++ grub_uint32_t outlen; /* digest length */ ++ ++ grub_uint8_t *pwd; /* password array */ ++ grub_uint32_t pwdlen; /* password length */ ++ ++ grub_uint8_t *salt; /* salt array */ ++ grub_uint32_t saltlen; /* salt length */ ++ ++ grub_uint8_t *secret; /* key array */ ++ grub_uint32_t secretlen; /* key length */ ++ ++ grub_uint8_t *ad; /* associated data array */ ++ grub_uint32_t adlen; /* associated data length */ ++ ++ grub_uint32_t t_cost; /* number of passes */ ++ grub_uint32_t m_cost; /* amount of memory requested (KB) */ ++ grub_uint32_t lanes; /* number of lanes */ ++ grub_uint32_t threads; /* maximum number of threads */ ++ ++ grub_uint32_t version; /* version number */ ++ ++ allocate_fptr allocate_cbk; /* pointer to memory allocator */ ++ deallocate_fptr grub_free_cbk; /* pointer to memory deallocator */ ++ ++ grub_uint32_t flags; /* array of bool options */ ++} argon2_context; ++ ++/* Argon2 primitive type */ ++typedef enum Argon2_type { ++ Argon2_d = 0, ++ Argon2_i = 1, ++ Argon2_id = 2 ++} argon2_type; ++ ++/* Version of the algorithm */ ++typedef enum Argon2_version { ++ ARGON2_VERSION_10 = 0x10, ++ ARGON2_VERSION_13 = 0x13, ++ ARGON2_VERSION_NUMBER = ARGON2_VERSION_13 ++} argon2_version; ++ ++/** ++ * Hashes a password with Argon2, producing a raw hash at @hash ++ * @param t_cost Number of iterations ++ * @param m_cost Sets memory usage to m_cost kibibytes ++ * @param parallelism Number of threads and compute lanes ++ * @param pwd Pointer to password ++ * @param pwdlen Password size in bytes ++ * @param salt Pointer to salt ++ * @param saltlen Salt size in bytes ++ * @param hash Buffer where to write the raw hash - updated by the function ++ * @param hashlen Desired length of the hash in bytes ++ * @pre Different parallelism levels will give different results ++ * @pre Returns ARGON2_OK if successful ++ */ ++ARGON2_PUBLIC int argon2_hash(const grub_uint32_t t_cost, const grub_uint32_t m_cost, ++ const grub_uint32_t parallelism, const void *pwd, ++ const grub_size_t pwdlen, const void *salt, ++ const grub_size_t saltlen, void *hash, ++ const grub_size_t hashlen, argon2_type type, ++ const grub_uint32_t version); ++ ++/** ++ * Get the associated error message for given error code ++ * @return The error message associated with the given error code ++ */ ++ARGON2_PUBLIC const char *argon2_error_message(int error_code); ++ ++#if defined(__cplusplus) ++} ++#endif ++ ++#endif +diff --git a/grub-core/lib/argon2/blake2/blake2-impl.h b/grub-core/lib/argon2/blake2/blake2-impl.h +new file mode 100644 +index 000000000..3a795680b +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blake2-impl.h +@@ -0,0 +1,151 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef PORTABLE_BLAKE2_IMPL_H ++#define PORTABLE_BLAKE2_IMPL_H ++ ++#if defined(_MSC_VER) ++#define BLAKE2_INLINE __inline ++#elif defined(__GNUC__) || defined(__clang__) ++#define BLAKE2_INLINE __inline__ ++#else ++#define BLAKE2_INLINE ++#endif ++ ++/* Argon2 Team - Begin Code */ ++/* ++ Not an exhaustive list, but should cover the majority of modern platforms ++ Additionally, the code will always be correct---this is only a performance ++ tweak. ++*/ ++#if (defined(__BYTE_ORDER__) && \ ++ (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)) || \ ++ defined(__LITTLE_ENDIAN__) || defined(__ARMEL__) || defined(__MIPSEL__) || \ ++ defined(__AARCH64EL__) || defined(__amd64__) || defined(__i386__) || \ ++ defined(_M_IX86) || defined(_M_X64) || defined(_M_AMD64) || \ ++ defined(_M_ARM) ++#define NATIVE_LITTLE_ENDIAN ++#endif ++/* Argon2 Team - End Code */ ++ ++static BLAKE2_INLINE grub_uint32_t load32(const void *src) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_uint32_t w; ++ grub_memcpy(&w, src, sizeof w); ++ return w; ++#else ++ const grub_uint8_t *p = (const grub_uint8_t *)src; ++ grub_uint32_t w = *p++; ++ w |= (grub_uint32_t)(*p++) << 8; ++ w |= (grub_uint32_t)(*p++) << 16; ++ w |= (grub_uint32_t)(*p++) << 24; ++ return w; ++#endif ++} ++ ++static BLAKE2_INLINE grub_uint64_t load64(const void *src) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_uint64_t w; ++ grub_memcpy(&w, src, sizeof w); ++ return w; ++#else ++ const grub_uint8_t *p = (const grub_uint8_t *)src; ++ grub_uint64_t w = *p++; ++ w |= (grub_uint64_t)(*p++) << 8; ++ w |= (grub_uint64_t)(*p++) << 16; ++ w |= (grub_uint64_t)(*p++) << 24; ++ w |= (grub_uint64_t)(*p++) << 32; ++ w |= (grub_uint64_t)(*p++) << 40; ++ w |= (grub_uint64_t)(*p++) << 48; ++ w |= (grub_uint64_t)(*p++) << 56; ++ return w; ++#endif ++} ++ ++static BLAKE2_INLINE void store32(void *dst, grub_uint32_t w) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_memcpy(dst, &w, sizeof w); ++#else ++ grub_uint8_t *p = (grub_uint8_t *)dst; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++#endif ++} ++ ++static BLAKE2_INLINE void store64(void *dst, grub_uint64_t w) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_memcpy(dst, &w, sizeof w); ++#else ++ grub_uint8_t *p = (grub_uint8_t *)dst; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++#endif ++} ++ ++static BLAKE2_INLINE grub_uint64_t load48(const void *src) { ++ const grub_uint8_t *p = (const grub_uint8_t *)src; ++ grub_uint64_t w = *p++; ++ w |= (grub_uint64_t)(*p++) << 8; ++ w |= (grub_uint64_t)(*p++) << 16; ++ w |= (grub_uint64_t)(*p++) << 24; ++ w |= (grub_uint64_t)(*p++) << 32; ++ w |= (grub_uint64_t)(*p++) << 40; ++ return w; ++} ++ ++static BLAKE2_INLINE void store48(void *dst, grub_uint64_t w) { ++ grub_uint8_t *p = (grub_uint8_t *)dst; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++} ++ ++static BLAKE2_INLINE grub_uint32_t rotr32(const grub_uint32_t w, const unsigned c) { ++ return (w >> c) | (w << (32 - c)); ++} ++ ++static BLAKE2_INLINE grub_uint64_t rotr64(const grub_uint64_t w, const unsigned c) { ++ return (w >> c) | (w << (64 - c)); ++} ++ ++#endif +diff --git a/grub-core/lib/argon2/blake2/blake2.h b/grub-core/lib/argon2/blake2/blake2.h +new file mode 100644 +index 000000000..4e8efeb22 +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blake2.h +@@ -0,0 +1,89 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef PORTABLE_BLAKE2_H ++#define PORTABLE_BLAKE2_H ++ ++#include "../argon2.h" ++ ++#if defined(__cplusplus) ++extern "C" { ++#endif ++ ++enum blake2b_constant { ++ BLAKE2B_BLOCKBYTES = 128, ++ BLAKE2B_OUTBYTES = 64, ++ BLAKE2B_KEYBYTES = 64, ++ BLAKE2B_SALTBYTES = 16, ++ BLAKE2B_PERSONALBYTES = 16 ++}; ++ ++#pragma pack(push, 1) ++typedef struct __blake2b_param { ++ grub_uint8_t digest_length; /* 1 */ ++ grub_uint8_t key_length; /* 2 */ ++ grub_uint8_t fanout; /* 3 */ ++ grub_uint8_t depth; /* 4 */ ++ grub_uint32_t leaf_length; /* 8 */ ++ grub_uint64_t node_offset; /* 16 */ ++ grub_uint8_t node_depth; /* 17 */ ++ grub_uint8_t inner_length; /* 18 */ ++ grub_uint8_t reserved[14]; /* 32 */ ++ grub_uint8_t salt[BLAKE2B_SALTBYTES]; /* 48 */ ++ grub_uint8_t personal[BLAKE2B_PERSONALBYTES]; /* 64 */ ++} blake2b_param; ++#pragma pack(pop) ++ ++typedef struct __blake2b_state { ++ grub_uint64_t h[8]; ++ grub_uint64_t t[2]; ++ grub_uint64_t f[2]; ++ grub_uint8_t buf[BLAKE2B_BLOCKBYTES]; ++ unsigned buflen; ++ unsigned outlen; ++ grub_uint8_t last_node; ++} blake2b_state; ++ ++/* Ensure param structs have not been wrongly padded */ ++/* Poor man's static_assert */ ++enum { ++ blake2_size_check_0 = 1 / !!(GRUB_CHAR_BIT == 8), ++ blake2_size_check_2 = ++ 1 / !!(sizeof(blake2b_param) == sizeof(grub_uint64_t) * GRUB_CHAR_BIT) ++}; ++ ++/* Streaming API */ ++ARGON2_LOCAL int blake2b_init(blake2b_state *S, grub_size_t outlen); ++ARGON2_LOCAL int blake2b_init_key(blake2b_state *S, grub_size_t outlen, const void *key, ++ grub_size_t keylen); ++ARGON2_LOCAL int blake2b_init_param(blake2b_state *S, const blake2b_param *P); ++ARGON2_LOCAL int blake2b_update(blake2b_state *S, const void *in, grub_size_t inlen); ++ARGON2_LOCAL int blake2b_final(blake2b_state *S, void *out, grub_size_t outlen); ++ ++/* Simple API */ ++ARGON2_LOCAL int blake2b(void *out, grub_size_t outlen, const void *in, grub_size_t inlen, ++ const void *key, grub_size_t keylen); ++ ++/* Argon2 Team - Begin Code */ ++ARGON2_LOCAL int blake2b_long(void *out, grub_size_t outlen, const void *in, grub_size_t inlen); ++/* Argon2 Team - End Code */ ++ ++#if defined(__cplusplus) ++} ++#endif ++ ++#endif +diff --git a/grub-core/lib/argon2/blake2/blake2b.c b/grub-core/lib/argon2/blake2/blake2b.c +new file mode 100644 +index 000000000..53abd7bef +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blake2b.c +@@ -0,0 +1,388 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#include "blake2.h" ++#include "blake2-impl.h" ++ ++static const grub_uint64_t blake2b_IV[8] = { ++ GRUB_UINT64_C(0x6a09e667f3bcc908), GRUB_UINT64_C(0xbb67ae8584caa73b), ++ GRUB_UINT64_C(0x3c6ef372fe94f82b), GRUB_UINT64_C(0xa54ff53a5f1d36f1), ++ GRUB_UINT64_C(0x510e527fade682d1), GRUB_UINT64_C(0x9b05688c2b3e6c1f), ++ GRUB_UINT64_C(0x1f83d9abfb41bd6b), GRUB_UINT64_C(0x5be0cd19137e2179)}; ++ ++static const unsigned int blake2b_sigma[12][16] = { ++ {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, ++ {14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3}, ++ {11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4}, ++ {7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8}, ++ {9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13}, ++ {2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9}, ++ {12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11}, ++ {13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10}, ++ {6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5}, ++ {10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0}, ++ {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, ++ {14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3}, ++}; ++ ++void clear_internal_memory(void *v, grub_size_t n); ++ ++static BLAKE2_INLINE void blake2b_set_lastnode(blake2b_state *S) { ++ S->f[1] = (grub_uint64_t)-1; ++} ++ ++static BLAKE2_INLINE void blake2b_set_lastblock(blake2b_state *S) { ++ if (S->last_node) { ++ blake2b_set_lastnode(S); ++ } ++ S->f[0] = (grub_uint64_t)-1; ++} ++ ++static BLAKE2_INLINE void blake2b_increment_counter(blake2b_state *S, ++ grub_uint64_t inc) { ++ S->t[0] += inc; ++ S->t[1] += (S->t[0] < inc); ++} ++ ++static BLAKE2_INLINE void blake2b_invalidate_state(blake2b_state *S) { ++ clear_internal_memory(S, sizeof(*S)); /* wipe */ ++ blake2b_set_lastblock(S); /* invalidate for further use */ ++} ++ ++static BLAKE2_INLINE void blake2b_init0(blake2b_state *S) { ++ grub_memset(S, 0, sizeof(*S)); ++ grub_memcpy(S->h, blake2b_IV, sizeof(S->h)); ++} ++ ++int blake2b_init_param(blake2b_state *S, const blake2b_param *P) { ++ const unsigned char *p = (const unsigned char *)P; ++ unsigned int i; ++ ++ if (NULL == P || NULL == S) { ++ return -1; ++ } ++ ++ blake2b_init0(S); ++ /* IV XOR Parameter Block */ ++ for (i = 0; i < 8; ++i) { ++ S->h[i] ^= load64(&p[i * sizeof(S->h[i])]); ++ } ++ S->outlen = P->digest_length; ++ return 0; ++} ++ ++/* Sequential blake2b initialization */ ++int blake2b_init(blake2b_state *S, grub_size_t outlen) { ++ blake2b_param P; ++ ++ if (S == NULL) { ++ return -1; ++ } ++ ++ if ((outlen == 0) || (outlen > BLAKE2B_OUTBYTES)) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ /* Setup Parameter Block for unkeyed BLAKE2 */ ++ P.digest_length = (grub_uint8_t)outlen; ++ P.key_length = 0; ++ P.fanout = 1; ++ P.depth = 1; ++ P.leaf_length = 0; ++ P.node_offset = 0; ++ P.node_depth = 0; ++ P.inner_length = 0; ++ grub_memset(P.reserved, 0, sizeof(P.reserved)); ++ grub_memset(P.salt, 0, sizeof(P.salt)); ++ grub_memset(P.personal, 0, sizeof(P.personal)); ++ ++ return blake2b_init_param(S, &P); ++} ++ ++int blake2b_init_key(blake2b_state *S, grub_size_t outlen, const void *key, ++ grub_size_t keylen) { ++ blake2b_param P; ++ ++ if (S == NULL) { ++ return -1; ++ } ++ ++ if ((outlen == 0) || (outlen > BLAKE2B_OUTBYTES)) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ if ((key == 0) || (keylen == 0) || (keylen > BLAKE2B_KEYBYTES)) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ /* Setup Parameter Block for keyed BLAKE2 */ ++ P.digest_length = (grub_uint8_t)outlen; ++ P.key_length = (grub_uint8_t)keylen; ++ P.fanout = 1; ++ P.depth = 1; ++ P.leaf_length = 0; ++ P.node_offset = 0; ++ P.node_depth = 0; ++ P.inner_length = 0; ++ grub_memset(P.reserved, 0, sizeof(P.reserved)); ++ grub_memset(P.salt, 0, sizeof(P.salt)); ++ grub_memset(P.personal, 0, sizeof(P.personal)); ++ ++ if (blake2b_init_param(S, &P) < 0) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ { ++ grub_uint8_t block[BLAKE2B_BLOCKBYTES]; ++ grub_memset(block, 0, BLAKE2B_BLOCKBYTES); ++ grub_memcpy(block, key, keylen); ++ blake2b_update(S, block, BLAKE2B_BLOCKBYTES); ++ /* Burn the key from stack */ ++ clear_internal_memory(block, BLAKE2B_BLOCKBYTES); ++ } ++ return 0; ++} ++ ++static void blake2b_compress(blake2b_state *S, const grub_uint8_t *block) { ++ grub_uint64_t m[16]; ++ grub_uint64_t v[16]; ++ unsigned int i, r; ++ ++ for (i = 0; i < 16; ++i) { ++ m[i] = load64(block + i * sizeof(m[i])); ++ } ++ ++ for (i = 0; i < 8; ++i) { ++ v[i] = S->h[i]; ++ } ++ ++ v[8] = blake2b_IV[0]; ++ v[9] = blake2b_IV[1]; ++ v[10] = blake2b_IV[2]; ++ v[11] = blake2b_IV[3]; ++ v[12] = blake2b_IV[4] ^ S->t[0]; ++ v[13] = blake2b_IV[5] ^ S->t[1]; ++ v[14] = blake2b_IV[6] ^ S->f[0]; ++ v[15] = blake2b_IV[7] ^ S->f[1]; ++ ++#define G(r, i, a, b, c, d) \ ++ do { \ ++ a = a + b + m[blake2b_sigma[r][2 * i + 0]]; \ ++ d = rotr64(d ^ a, 32); \ ++ c = c + d; \ ++ b = rotr64(b ^ c, 24); \ ++ a = a + b + m[blake2b_sigma[r][2 * i + 1]]; \ ++ d = rotr64(d ^ a, 16); \ ++ c = c + d; \ ++ b = rotr64(b ^ c, 63); \ ++ } while ((void)0, 0) ++ ++#define ROUND(r) \ ++ do { \ ++ G(r, 0, v[0], v[4], v[8], v[12]); \ ++ G(r, 1, v[1], v[5], v[9], v[13]); \ ++ G(r, 2, v[2], v[6], v[10], v[14]); \ ++ G(r, 3, v[3], v[7], v[11], v[15]); \ ++ G(r, 4, v[0], v[5], v[10], v[15]); \ ++ G(r, 5, v[1], v[6], v[11], v[12]); \ ++ G(r, 6, v[2], v[7], v[8], v[13]); \ ++ G(r, 7, v[3], v[4], v[9], v[14]); \ ++ } while ((void)0, 0) ++ ++ for (r = 0; r < 12; ++r) { ++ ROUND(r); ++ } ++ ++ for (i = 0; i < 8; ++i) { ++ S->h[i] = S->h[i] ^ v[i] ^ v[i + 8]; ++ } ++ ++#undef G ++#undef ROUND ++} ++ ++int blake2b_update(blake2b_state *S, const void *in, grub_size_t inlen) { ++ const grub_uint8_t *pin = (const grub_uint8_t *)in; ++ ++ if (inlen == 0) { ++ return 0; ++ } ++ ++ /* Sanity check */ ++ if (S == NULL || in == NULL) { ++ return -1; ++ } ++ ++ /* Is this a reused state? */ ++ if (S->f[0] != 0) { ++ return -1; ++ } ++ ++ if (S->buflen + inlen > BLAKE2B_BLOCKBYTES) { ++ /* Complete current block */ ++ grub_size_t left = S->buflen; ++ grub_size_t fill = BLAKE2B_BLOCKBYTES - left; ++ grub_memcpy(&S->buf[left], pin, fill); ++ blake2b_increment_counter(S, BLAKE2B_BLOCKBYTES); ++ blake2b_compress(S, S->buf); ++ S->buflen = 0; ++ inlen -= fill; ++ pin += fill; ++ /* Avoid buffer copies when possible */ ++ while (inlen > BLAKE2B_BLOCKBYTES) { ++ blake2b_increment_counter(S, BLAKE2B_BLOCKBYTES); ++ blake2b_compress(S, pin); ++ inlen -= BLAKE2B_BLOCKBYTES; ++ pin += BLAKE2B_BLOCKBYTES; ++ } ++ } ++ grub_memcpy(&S->buf[S->buflen], pin, inlen); ++ S->buflen += (unsigned int)inlen; ++ return 0; ++} ++ ++int blake2b_final(blake2b_state *S, void *out, grub_size_t outlen) { ++ grub_uint8_t buffer[BLAKE2B_OUTBYTES] = {0}; ++ unsigned int i; ++ ++ /* Sanity checks */ ++ if (S == NULL || out == NULL || outlen < S->outlen) { ++ return -1; ++ } ++ ++ /* Is this a reused state? */ ++ if (S->f[0] != 0) { ++ return -1; ++ } ++ ++ blake2b_increment_counter(S, S->buflen); ++ blake2b_set_lastblock(S); ++ grub_memset(&S->buf[S->buflen], 0, BLAKE2B_BLOCKBYTES - S->buflen); /* Padding */ ++ blake2b_compress(S, S->buf); ++ ++ for (i = 0; i < 8; ++i) { /* Output full hash to temp buffer */ ++ store64(buffer + sizeof(S->h[i]) * i, S->h[i]); ++ } ++ ++ grub_memcpy(out, buffer, S->outlen); ++ clear_internal_memory(buffer, sizeof(buffer)); ++ clear_internal_memory(S->buf, sizeof(S->buf)); ++ clear_internal_memory(S->h, sizeof(S->h)); ++ return 0; ++} ++ ++int blake2b(void *out, grub_size_t outlen, const void *in, grub_size_t inlen, ++ const void *key, grub_size_t keylen) { ++ blake2b_state S; ++ int ret = -1; ++ ++ /* Verify parameters */ ++ if (NULL == in && inlen > 0) { ++ goto fail; ++ } ++ ++ if (NULL == out || outlen == 0 || outlen > BLAKE2B_OUTBYTES) { ++ goto fail; ++ } ++ ++ if ((NULL == key && keylen > 0) || keylen > BLAKE2B_KEYBYTES) { ++ goto fail; ++ } ++ ++ if (keylen > 0) { ++ if (blake2b_init_key(&S, outlen, key, keylen) < 0) { ++ goto fail; ++ } ++ } else { ++ if (blake2b_init(&S, outlen) < 0) { ++ goto fail; ++ } ++ } ++ ++ if (blake2b_update(&S, in, inlen) < 0) { ++ goto fail; ++ } ++ ret = blake2b_final(&S, out, outlen); ++ ++fail: ++ clear_internal_memory(&S, sizeof(S)); ++ return ret; ++} ++ ++/* Argon2 Team - Begin Code */ ++int blake2b_long(void *pout, grub_size_t outlen, const void *in, grub_size_t inlen) { ++ grub_uint8_t *out = (grub_uint8_t *)pout; ++ blake2b_state blake_state; ++ grub_uint8_t outlen_bytes[sizeof(grub_uint32_t)] = {0}; ++ int ret = -1; ++ ++ if (outlen > GRUB_UINT32_MAX) { ++ goto fail; ++ } ++ ++ /* Ensure little-endian byte order! */ ++ store32(outlen_bytes, (grub_uint32_t)outlen); ++ ++#define TRY(statement) \ ++ do { \ ++ ret = statement; \ ++ if (ret < 0) { \ ++ goto fail; \ ++ } \ ++ } while ((void)0, 0) ++ ++ if (outlen <= BLAKE2B_OUTBYTES) { ++ TRY(blake2b_init(&blake_state, outlen)); ++ TRY(blake2b_update(&blake_state, outlen_bytes, sizeof(outlen_bytes))); ++ TRY(blake2b_update(&blake_state, in, inlen)); ++ TRY(blake2b_final(&blake_state, out, outlen)); ++ } else { ++ grub_uint32_t toproduce; ++ grub_uint8_t out_buffer[BLAKE2B_OUTBYTES]; ++ grub_uint8_t in_buffer[BLAKE2B_OUTBYTES]; ++ TRY(blake2b_init(&blake_state, BLAKE2B_OUTBYTES)); ++ TRY(blake2b_update(&blake_state, outlen_bytes, sizeof(outlen_bytes))); ++ TRY(blake2b_update(&blake_state, in, inlen)); ++ TRY(blake2b_final(&blake_state, out_buffer, BLAKE2B_OUTBYTES)); ++ grub_memcpy(out, out_buffer, BLAKE2B_OUTBYTES / 2); ++ out += BLAKE2B_OUTBYTES / 2; ++ toproduce = (grub_uint32_t)outlen - BLAKE2B_OUTBYTES / 2; ++ ++ while (toproduce > BLAKE2B_OUTBYTES) { ++ grub_memcpy(in_buffer, out_buffer, BLAKE2B_OUTBYTES); ++ TRY(blake2b(out_buffer, BLAKE2B_OUTBYTES, in_buffer, ++ BLAKE2B_OUTBYTES, NULL, 0)); ++ grub_memcpy(out, out_buffer, BLAKE2B_OUTBYTES / 2); ++ out += BLAKE2B_OUTBYTES / 2; ++ toproduce -= BLAKE2B_OUTBYTES / 2; ++ } ++ ++ grub_memcpy(in_buffer, out_buffer, BLAKE2B_OUTBYTES); ++ TRY(blake2b(out_buffer, toproduce, in_buffer, BLAKE2B_OUTBYTES, NULL, ++ 0)); ++ grub_memcpy(out, out_buffer, toproduce); ++ } ++fail: ++ clear_internal_memory(&blake_state, sizeof(blake_state)); ++ return ret; ++#undef TRY ++} ++/* Argon2 Team - End Code */ +diff --git a/grub-core/lib/argon2/blake2/blamka-round-ref.h b/grub-core/lib/argon2/blake2/blamka-round-ref.h +new file mode 100644 +index 000000000..7f0071ada +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blamka-round-ref.h +@@ -0,0 +1,56 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef BLAKE_ROUND_MKA_H ++#define BLAKE_ROUND_MKA_H ++ ++#include "blake2.h" ++#include "blake2-impl.h" ++ ++/* designed by the Lyra PHC team */ ++static BLAKE2_INLINE grub_uint64_t fBlaMka(grub_uint64_t x, grub_uint64_t y) { ++ const grub_uint64_t m = GRUB_UINT64_C(0xFFFFFFFF); ++ const grub_uint64_t xy = (x & m) * (y & m); ++ return x + y + 2 * xy; ++} ++ ++#define G(a, b, c, d) \ ++ do { \ ++ a = fBlaMka(a, b); \ ++ d = rotr64(d ^ a, 32); \ ++ c = fBlaMka(c, d); \ ++ b = rotr64(b ^ c, 24); \ ++ a = fBlaMka(a, b); \ ++ d = rotr64(d ^ a, 16); \ ++ c = fBlaMka(c, d); \ ++ b = rotr64(b ^ c, 63); \ ++ } while ((void)0, 0) ++ ++#define BLAKE2_ROUND_NOMSG(v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, \ ++ v12, v13, v14, v15) \ ++ do { \ ++ G(v0, v4, v8, v12); \ ++ G(v1, v5, v9, v13); \ ++ G(v2, v6, v10, v14); \ ++ G(v3, v7, v11, v15); \ ++ G(v0, v5, v10, v15); \ ++ G(v1, v6, v11, v12); \ ++ G(v2, v7, v8, v13); \ ++ G(v3, v4, v9, v14); \ ++ } while ((void)0, 0) ++ ++#endif +diff --git a/grub-core/lib/argon2/core.c b/grub-core/lib/argon2/core.c +new file mode 100644 +index 000000000..0fe5b74cb +--- /dev/null ++++ b/grub-core/lib/argon2/core.c +@@ -0,0 +1,506 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++/*For memory wiping*/ ++#ifdef _MSC_VER ++#include <windows.h> ++#include <winbase.h> /* For SecureZeroMemory */ ++#endif ++#if defined __STDC_LIB_EXT1__ ++#define __STDC_WANT_LIB_EXT1__ 1 ++#endif ++#define VC_GE_2005(version) (version >= 1400) ++ ++#include "core.h" ++#include "blake2/blake2.h" ++#include "blake2/blake2-impl.h" ++ ++#ifdef GENKAT ++#include "genkat.h" ++#endif ++ ++#if defined(__clang__) ++#if __has_attribute(optnone) ++#define NOT_OPTIMIZED __attribute__((optnone)) ++#endif ++#elif defined(__GNUC__) ++#define GCC_VERSION \ ++ (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) ++#if GCC_VERSION >= 40400 ++#define NOT_OPTIMIZED __attribute__((optimize("O0"))) ++#endif ++#endif ++#ifndef NOT_OPTIMIZED ++#define NOT_OPTIMIZED ++#endif ++ ++/***************Instance and Position constructors**********/ ++void init_block_value(block *b, grub_uint8_t in) { grub_memset(b->v, in, sizeof(b->v)); } ++ ++void copy_block(block *dst, const block *src) { ++ grub_memcpy(dst->v, src->v, sizeof(grub_uint64_t) * ARGON2_QWORDS_IN_BLOCK); ++} ++ ++void xor_block(block *dst, const block *src) { ++ int i; ++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) { ++ dst->v[i] ^= src->v[i]; ++ } ++} ++ ++static void load_block(block *dst, const void *input) { ++ unsigned i; ++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) { ++ dst->v[i] = load64((const grub_uint8_t *)input + i * sizeof(dst->v[i])); ++ } ++} ++ ++static void store_block(void *output, const block *src) { ++ unsigned i; ++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) { ++ store64((grub_uint8_t *)output + i * sizeof(src->v[i]), src->v[i]); ++ } ++} ++ ++/***************Memory functions*****************/ ++ ++int allocate_memory(const argon2_context *context, grub_uint8_t **memory, ++ grub_size_t num, grub_size_t size) { ++ grub_size_t memory_size = num*size; ++ if (memory == NULL) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ /* 1. Check for multiplication overflow */ ++ if (size != 0 && memory_size / size != num) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ /* 2. Try to allocate with appropriate allocator */ ++ if (context->allocate_cbk) { ++ (context->allocate_cbk)(memory, memory_size); ++ } else { ++ *memory = grub_malloc(memory_size); ++ } ++ ++ if (*memory == NULL) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ return ARGON2_OK; ++} ++ ++void grub_free_memory(const argon2_context *context, grub_uint8_t *memory, ++ grub_size_t num, grub_size_t size) { ++ grub_size_t memory_size = num*size; ++ clear_internal_memory(memory, memory_size); ++ if (context->grub_free_cbk) { ++ (context->grub_free_cbk)(memory, memory_size); ++ } else { ++ grub_free(memory); ++ } ++} ++ ++void NOT_OPTIMIZED secure_wipe_memory(void *v, grub_size_t n) { ++ static void *(*const volatile grub_memset_sec)(void *, int, grub_size_t) = &grub_memset; ++ grub_memset_sec(v, 0, n); ++} ++ ++/* Memory clear flag defaults to true. */ ++int FLAG_clear_internal_memory = 1; ++void clear_internal_memory(void *v, grub_size_t n) { ++ if (FLAG_clear_internal_memory && v) { ++ secure_wipe_memory(v, n); ++ } ++} ++ ++void finalize(const argon2_context *context, argon2_instance_t *instance) { ++ if (context != NULL && instance != NULL) { ++ block blockhash; ++ grub_uint32_t l; ++ ++ copy_block(&blockhash, instance->memory + instance->lane_length - 1); ++ ++ /* XOR the last blocks */ ++ for (l = 1; l < instance->lanes; ++l) { ++ grub_uint32_t last_block_in_lane = ++ l * instance->lane_length + (instance->lane_length - 1); ++ xor_block(&blockhash, instance->memory + last_block_in_lane); ++ } ++ ++ /* Hash the result */ ++ { ++ grub_uint8_t blockhash_bytes[ARGON2_BLOCK_SIZE]; ++ store_block(blockhash_bytes, &blockhash); ++ blake2b_long(context->out, context->outlen, blockhash_bytes, ++ ARGON2_BLOCK_SIZE); ++ /* clear blockhash and blockhash_bytes */ ++ clear_internal_memory(blockhash.v, ARGON2_BLOCK_SIZE); ++ clear_internal_memory(blockhash_bytes, ARGON2_BLOCK_SIZE); ++ } ++ ++#ifdef GENKAT ++ print_tag(context->out, context->outlen); ++#endif ++ ++ grub_free_memory(context, (grub_uint8_t *)instance->memory, ++ instance->memory_blocks, sizeof(block)); ++ } ++} ++ ++grub_uint32_t index_alpha(const argon2_instance_t *instance, ++ const argon2_position_t *position, grub_uint32_t pseudo_rand, ++ int same_lane) { ++ /* ++ * Pass 0: ++ * This lane : all already finished segments plus already constructed ++ * blocks in this segment ++ * Other lanes : all already finished segments ++ * Pass 1+: ++ * This lane : (SYNC_POINTS - 1) last segments plus already constructed ++ * blocks in this segment ++ * Other lanes : (SYNC_POINTS - 1) last segments ++ */ ++ grub_uint32_t reference_area_size; ++ grub_uint64_t relative_position; ++ grub_uint64_t start_position, absolute_position; ++ ++ if (0 == position->pass) { ++ /* First pass */ ++ if (0 == position->slice) { ++ /* First slice */ ++ reference_area_size = ++ position->index - 1; /* all but the previous */ ++ } else { ++ if (same_lane) { ++ /* The same lane => add current segment */ ++ reference_area_size = ++ position->slice * instance->segment_length + ++ position->index - 1; ++ } else { ++ reference_area_size = ++ position->slice * instance->segment_length + ++ ((position->index == 0) ? (-1) : 0); ++ } ++ } ++ } else { ++ /* Second pass */ ++ if (same_lane) { ++ reference_area_size = instance->lane_length - ++ instance->segment_length + position->index - ++ 1; ++ } else { ++ reference_area_size = instance->lane_length - ++ instance->segment_length + ++ ((position->index == 0) ? (-1) : 0); ++ } ++ } ++ ++ /* 1.2.4. Mapping pseudo_rand to 0..<reference_area_size-1> and produce ++ * relative position */ ++ relative_position = pseudo_rand; ++ relative_position = relative_position * relative_position >> 32; ++ relative_position = reference_area_size - 1 - ++ (reference_area_size * relative_position >> 32); ++ ++ /* 1.2.5 Computing starting position */ ++ start_position = 0; ++ ++ if (0 != position->pass) { ++ start_position = (position->slice == ARGON2_SYNC_POINTS - 1) ++ ? 0 ++ : (position->slice + 1) * instance->segment_length; ++ } ++ ++ /* 1.2.6. Computing absolute position */ ++ grub_divmod64 (start_position + relative_position, instance->lane_length, ++ &absolute_position); /* absolute position */ ++ return absolute_position; ++} ++ ++/* Single-threaded version for p=1 case */ ++static int fill_memory_blocks_st(argon2_instance_t *instance) { ++ grub_uint32_t r, s, l; ++ ++ for (r = 0; r < instance->passes; ++r) { ++ for (s = 0; s < ARGON2_SYNC_POINTS; ++s) { ++ for (l = 0; l < instance->lanes; ++l) { ++ argon2_position_t position = {r, l, (grub_uint8_t)s, 0}; ++ fill_segment(instance, position); ++ } ++ } ++#ifdef GENKAT ++ internal_kat(instance, r); /* Print all memory blocks */ ++#endif ++ } ++ return ARGON2_OK; ++} ++ ++int fill_memory_blocks(argon2_instance_t *instance) { ++ if (instance == NULL || instance->lanes == 0) { ++ return ARGON2_INCORRECT_PARAMETER; ++ } ++ return fill_memory_blocks_st(instance); ++} ++ ++int validate_inputs(const argon2_context *context) { ++ if (NULL == context) { ++ return ARGON2_INCORRECT_PARAMETER; ++ } ++ ++ if (NULL == context->out) { ++ return ARGON2_OUTPUT_PTR_NULL; ++ } ++ ++ /* Validate output length */ ++ if (ARGON2_MIN_OUTLEN > context->outlen) { ++ return ARGON2_OUTPUT_TOO_SHORT; ++ } ++ ++ if (ARGON2_MAX_OUTLEN < context->outlen) { ++ return ARGON2_OUTPUT_TOO_LONG; ++ } ++ ++ /* Validate password (required param) */ ++ if (NULL == context->pwd) { ++ if (0 != context->pwdlen) { ++ return ARGON2_PWD_PTR_MISMATCH; ++ } ++ } ++ ++ if (ARGON2_MAX_PWD_LENGTH < context->pwdlen) { ++ return ARGON2_PWD_TOO_LONG; ++ } ++ ++ /* Validate salt (required param) */ ++ if (NULL == context->salt) { ++ if (0 != context->saltlen) { ++ return ARGON2_SALT_PTR_MISMATCH; ++ } ++ } ++ ++ if (ARGON2_MIN_SALT_LENGTH > context->saltlen) { ++ return ARGON2_SALT_TOO_SHORT; ++ } ++ ++ if (ARGON2_MAX_SALT_LENGTH < context->saltlen) { ++ return ARGON2_SALT_TOO_LONG; ++ } ++ ++ /* Validate secret (optional param) */ ++ if (NULL == context->secret) { ++ if (0 != context->secretlen) { ++ return ARGON2_SECRET_PTR_MISMATCH; ++ } ++ } else { ++ if (ARGON2_MAX_SECRET < context->secretlen) { ++ return ARGON2_SECRET_TOO_LONG; ++ } ++ } ++ ++ /* Validate associated data (optional param) */ ++ if (NULL == context->ad) { ++ if (0 != context->adlen) { ++ return ARGON2_AD_PTR_MISMATCH; ++ } ++ } else { ++ if (ARGON2_MAX_AD_LENGTH < context->adlen) { ++ return ARGON2_AD_TOO_LONG; ++ } ++ } ++ ++ /* Validate memory cost */ ++ if (ARGON2_MIN_MEMORY > context->m_cost) { ++ return ARGON2_MEMORY_TOO_LITTLE; ++ } ++ ++ if (context->m_cost < 8 * context->lanes) { ++ return ARGON2_MEMORY_TOO_LITTLE; ++ } ++ ++ /* Validate time cost */ ++ if (ARGON2_MIN_TIME > context->t_cost) { ++ return ARGON2_TIME_TOO_SMALL; ++ } ++ ++ if (ARGON2_MAX_TIME < context->t_cost) { ++ return ARGON2_TIME_TOO_LARGE; ++ } ++ ++ /* Validate lanes */ ++ if (ARGON2_MIN_LANES > context->lanes) { ++ return ARGON2_LANES_TOO_FEW; ++ } ++ ++ if (ARGON2_MAX_LANES < context->lanes) { ++ return ARGON2_LANES_TOO_MANY; ++ } ++ ++ /* Validate threads */ ++ if (ARGON2_MIN_THREADS > context->threads) { ++ return ARGON2_THREADS_TOO_FEW; ++ } ++ ++ if (ARGON2_MAX_THREADS < context->threads) { ++ return ARGON2_THREADS_TOO_MANY; ++ } ++ ++ if (NULL != context->allocate_cbk && NULL == context->grub_free_cbk) { ++ return ARGON2_FREE_MEMORY_CBK_NULL; ++ } ++ ++ if (NULL == context->allocate_cbk && NULL != context->grub_free_cbk) { ++ return ARGON2_ALLOCATE_MEMORY_CBK_NULL; ++ } ++ ++ return ARGON2_OK; ++} ++ ++void fill_first_blocks(grub_uint8_t *blockhash, const argon2_instance_t *instance) { ++ grub_uint32_t l; ++ /* Make the first and second block in each lane as G(H0||0||i) or ++ G(H0||1||i) */ ++ grub_uint8_t blockhash_bytes[ARGON2_BLOCK_SIZE]; ++ for (l = 0; l < instance->lanes; ++l) { ++ ++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, 0); ++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH + 4, l); ++ blake2b_long(blockhash_bytes, ARGON2_BLOCK_SIZE, blockhash, ++ ARGON2_PREHASH_SEED_LENGTH); ++ load_block(&instance->memory[l * instance->lane_length + 0], ++ blockhash_bytes); ++ ++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, 1); ++ blake2b_long(blockhash_bytes, ARGON2_BLOCK_SIZE, blockhash, ++ ARGON2_PREHASH_SEED_LENGTH); ++ load_block(&instance->memory[l * instance->lane_length + 1], ++ blockhash_bytes); ++ } ++ clear_internal_memory(blockhash_bytes, ARGON2_BLOCK_SIZE); ++} ++ ++void initial_hash(grub_uint8_t *blockhash, argon2_context *context, ++ argon2_type type) { ++ blake2b_state BlakeHash; ++ grub_uint8_t value[sizeof(grub_uint32_t)]; ++ ++ if (NULL == context || NULL == blockhash) { ++ return; ++ } ++ ++ blake2b_init(&BlakeHash, ARGON2_PREHASH_DIGEST_LENGTH); ++ ++ store32(&value, context->lanes); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->outlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->m_cost); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->t_cost); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->version); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, (grub_uint32_t)type); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->pwdlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->pwd != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->pwd, ++ context->pwdlen); ++ ++ if (context->flags & ARGON2_FLAG_CLEAR_PASSWORD) { ++ secure_wipe_memory(context->pwd, context->pwdlen); ++ context->pwdlen = 0; ++ } ++ } ++ ++ store32(&value, context->saltlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->salt != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->salt, ++ context->saltlen); ++ } ++ ++ store32(&value, context->secretlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->secret != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->secret, ++ context->secretlen); ++ ++ if (context->flags & ARGON2_FLAG_CLEAR_SECRET) { ++ secure_wipe_memory(context->secret, context->secretlen); ++ context->secretlen = 0; ++ } ++ } ++ ++ store32(&value, context->adlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->ad != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->ad, ++ context->adlen); ++ } ++ ++ blake2b_final(&BlakeHash, blockhash, ARGON2_PREHASH_DIGEST_LENGTH); ++} ++ ++int initialize(argon2_instance_t *instance, argon2_context *context) { ++ grub_uint8_t blockhash[ARGON2_PREHASH_SEED_LENGTH]; ++ int result = ARGON2_OK; ++ ++ if (instance == NULL || context == NULL) ++ return ARGON2_INCORRECT_PARAMETER; ++ instance->context_ptr = context; ++ ++ /* 1. Memory allocation */ ++ result = allocate_memory(context, (grub_uint8_t **)&(instance->memory), ++ instance->memory_blocks, sizeof(block)); ++ if (result != ARGON2_OK) { ++ return result; ++ } ++ ++ /* 2. Initial hashing */ ++ /* H_0 + 8 extra bytes to produce the first blocks */ ++ /* grub_uint8_t blockhash[ARGON2_PREHASH_SEED_LENGTH]; */ ++ /* Hashing all inputs */ ++ initial_hash(blockhash, context, instance->type); ++ /* Zeroing 8 extra bytes */ ++ clear_internal_memory(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, ++ ARGON2_PREHASH_SEED_LENGTH - ++ ARGON2_PREHASH_DIGEST_LENGTH); ++ ++#ifdef GENKAT ++ initial_kat(blockhash, context, instance->type); ++#endif ++ ++ /* 3. Creating first blocks, we always have at least two blocks in a slice ++ */ ++ fill_first_blocks(blockhash, instance); ++ /* Clearing the hash */ ++ clear_internal_memory(blockhash, ARGON2_PREHASH_SEED_LENGTH); ++ ++ return ARGON2_OK; ++} +diff --git a/grub-core/lib/argon2/core.h b/grub-core/lib/argon2/core.h +new file mode 100644 +index 000000000..bbcd56998 +--- /dev/null ++++ b/grub-core/lib/argon2/core.h +@@ -0,0 +1,228 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef ARGON2_CORE_H ++#define ARGON2_CORE_H ++ ++#include "argon2.h" ++ ++#define CONST_CAST(x) (x)(grub_addr_t) ++ ++/**********************Argon2 internal constants*******************************/ ++ ++enum argon2_core_constants { ++ /* Memory block size in bytes */ ++ ARGON2_BLOCK_SIZE = 1024, ++ ARGON2_QWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 8, ++ ARGON2_OWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 16, ++ ARGON2_HWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 32, ++ ARGON2_512BIT_WORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 64, ++ ++ /* Number of pseudo-random values generated by one call to Blake in Argon2i ++ to ++ generate reference block positions */ ++ ARGON2_ADDRESSES_IN_BLOCK = 128, ++ ++ /* Pre-hashing digest length and its extension*/ ++ ARGON2_PREHASH_DIGEST_LENGTH = 64, ++ ARGON2_PREHASH_SEED_LENGTH = 72 ++}; ++ ++/*************************Argon2 internal data types***********************/ ++ ++/* ++ * Structure for the (1KB) memory block implemented as 128 64-bit words. ++ * Memory blocks can be copied, XORed. Internal words can be accessed by [] (no ++ * bounds checking). ++ */ ++typedef struct block_ { grub_uint64_t v[ARGON2_QWORDS_IN_BLOCK]; } block; ++ ++/*****************Functions that work with the block******************/ ++ ++/* Initialize each byte of the block with @in */ ++void init_block_value(block *b, grub_uint8_t in); ++ ++/* Copy block @src to block @dst */ ++void copy_block(block *dst, const block *src); ++ ++/* XOR @src onto @dst bytewise */ ++void xor_block(block *dst, const block *src); ++ ++/* ++ * Argon2 instance: memory pointer, number of passes, amount of memory, type, ++ * and derived values. ++ * Used to evaluate the number and location of blocks to construct in each ++ * thread ++ */ ++typedef struct Argon2_instance_t { ++ block *memory; /* Memory pointer */ ++ grub_uint32_t version; ++ grub_uint32_t passes; /* Number of passes */ ++ grub_uint32_t memory_blocks; /* Number of blocks in memory */ ++ grub_uint32_t segment_length; ++ grub_uint32_t lane_length; ++ grub_uint32_t lanes; ++ grub_uint32_t threads; ++ argon2_type type; ++ int print_internals; /* whether to print the memory blocks */ ++ argon2_context *context_ptr; /* points back to original context */ ++} argon2_instance_t; ++ ++/* ++ * Argon2 position: where we construct the block right now. Used to distribute ++ * work between threads. ++ */ ++typedef struct Argon2_position_t { ++ grub_uint32_t pass; ++ grub_uint32_t lane; ++ grub_uint8_t slice; ++ grub_uint32_t index; ++} argon2_position_t; ++ ++/*Struct that holds the inputs for thread handling FillSegment*/ ++typedef struct Argon2_thread_data { ++ argon2_instance_t *instance_ptr; ++ argon2_position_t pos; ++} argon2_thread_data; ++ ++/*************************Argon2 core functions********************************/ ++ ++/* Allocates memory to the given pointer, uses the appropriate allocator as ++ * specified in the context. Total allocated memory is num*size. ++ * @param context argon2_context which specifies the allocator ++ * @param memory pointer to the pointer to the memory ++ * @param size the size in bytes for each element to be allocated ++ * @param num the number of elements to be allocated ++ * @return ARGON2_OK if @memory is a valid pointer and memory is allocated ++ */ ++int allocate_memory(const argon2_context *context, grub_uint8_t **memory, ++ grub_size_t num, grub_size_t size); ++ ++/* ++ * Frees memory at the given pointer, uses the appropriate deallocator as ++ * specified in the context. Also cleans the memory using clear_internal_memory. ++ * @param context argon2_context which specifies the deallocator ++ * @param memory pointer to buffer to be grub_freed ++ * @param size the size in bytes for each element to be deallocated ++ * @param num the number of elements to be deallocated ++ */ ++void grub_free_memory(const argon2_context *context, grub_uint8_t *memory, ++ grub_size_t num, grub_size_t size); ++ ++/* Function that securely cleans the memory. This ignores any flags set ++ * regarding clearing memory. Usually one just calls clear_internal_memory. ++ * @param mem Pointer to the memory ++ * @param s Memory size in bytes ++ */ ++void secure_wipe_memory(void *v, grub_size_t n); ++ ++/* Function that securely clears the memory if FLAG_clear_internal_memory is ++ * set. If the flag isn't set, this function does nothing. ++ * @param mem Pointer to the memory ++ * @param s Memory size in bytes ++ */ ++void clear_internal_memory(void *v, grub_size_t n); ++ ++/* ++ * Computes absolute position of reference block in the lane following a skewed ++ * distribution and using a pseudo-random value as input ++ * @param instance Pointer to the current instance ++ * @param position Pointer to the current position ++ * @param pseudo_rand 32-bit pseudo-random value used to determine the position ++ * @param same_lane Indicates if the block will be taken from the current lane. ++ * If so we can reference the current segment ++ * @pre All pointers must be valid ++ */ ++grub_uint32_t index_alpha(const argon2_instance_t *instance, ++ const argon2_position_t *position, grub_uint32_t pseudo_rand, ++ int same_lane); ++ ++/* ++ * Function that validates all inputs against predefined restrictions and return ++ * an error code ++ * @param context Pointer to current Argon2 context ++ * @return ARGON2_OK if everything is all right, otherwise one of error codes ++ * (all defined in <argon2.h> ++ */ ++int validate_inputs(const argon2_context *context); ++ ++/* ++ * Hashes all the inputs into @a blockhash[PREHASH_DIGEST_LENGTH], clears ++ * password and secret if needed ++ * @param context Pointer to the Argon2 internal structure containing memory ++ * pointer, and parameters for time and space requirements. ++ * @param blockhash Buffer for pre-hashing digest ++ * @param type Argon2 type ++ * @pre @a blockhash must have at least @a PREHASH_DIGEST_LENGTH bytes ++ * allocated ++ */ ++void initial_hash(grub_uint8_t *blockhash, argon2_context *context, ++ argon2_type type); ++ ++/* ++ * Function creates first 2 blocks per lane ++ * @param instance Pointer to the current instance ++ * @param blockhash Pointer to the pre-hashing digest ++ * @pre blockhash must point to @a PREHASH_SEED_LENGTH allocated values ++ */ ++void fill_first_blocks(grub_uint8_t *blockhash, const argon2_instance_t *instance); ++ ++/* ++ * Function allocates memory, hashes the inputs with Blake, and creates first ++ * two blocks. Returns the pointer to the main memory with 2 blocks per lane ++ * initialized ++ * @param context Pointer to the Argon2 internal structure containing memory ++ * pointer, and parameters for time and space requirements. ++ * @param instance Current Argon2 instance ++ * @return Zero if successful, -1 if memory failed to allocate. @context->state ++ * will be modified if successful. ++ */ ++int initialize(argon2_instance_t *instance, argon2_context *context); ++ ++/* ++ * XORing the last block of each lane, hashing it, making the tag. Deallocates ++ * the memory. ++ * @param context Pointer to current Argon2 context (use only the out parameters ++ * from it) ++ * @param instance Pointer to current instance of Argon2 ++ * @pre instance->state must point to necessary amount of memory ++ * @pre context->out must point to outlen bytes of memory ++ * @pre if context->grub_free_cbk is not NULL, it should point to a function that ++ * deallocates memory ++ */ ++void finalize(const argon2_context *context, argon2_instance_t *instance); ++ ++/* ++ * Function that fills the segment using previous segments also from other ++ * threads ++ * @param context current context ++ * @param instance Pointer to the current instance ++ * @param position Current position ++ * @pre all block pointers must be valid ++ */ ++void fill_segment(const argon2_instance_t *instance, ++ argon2_position_t position); ++ ++/* ++ * Function that fills the entire memory t_cost times based on the first two ++ * blocks in each lane ++ * @param instance Pointer to the current instance ++ * @return ARGON2_OK if successful, @context->state ++ */ ++int fill_memory_blocks(argon2_instance_t *instance); ++ ++#endif +diff --git a/grub-core/lib/argon2/ref.c b/grub-core/lib/argon2/ref.c +new file mode 100644 +index 000000000..c933df80d +--- /dev/null ++++ b/grub-core/lib/argon2/ref.c +@@ -0,0 +1,190 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#include "argon2.h" ++#include "core.h" ++ ++#include "blake2/blamka-round-ref.h" ++#include "blake2/blake2-impl.h" ++#include "blake2/blake2.h" ++ ++ ++/* ++ * Function fills a new memory block and optionally XORs the old block over the new one. ++ * @next_block must be initialized. ++ * @param prev_block Pointer to the previous block ++ * @param ref_block Pointer to the reference block ++ * @param next_block Pointer to the block to be constructed ++ * @param with_xor Whether to XOR into the new block (1) or just overwrite (0) ++ * @pre all block pointers must be valid ++ */ ++static void fill_block(const block *prev_block, const block *ref_block, ++ block *next_block, int with_xor) { ++ block blockR, block_tmp; ++ unsigned i; ++ ++ copy_block(&blockR, ref_block); ++ xor_block(&blockR, prev_block); ++ copy_block(&block_tmp, &blockR); ++ /* Now blockR = ref_block + prev_block and block_tmp = ref_block + prev_block */ ++ if (with_xor) { ++ /* Saving the next block contents for XOR over: */ ++ xor_block(&block_tmp, next_block); ++ /* Now blockR = ref_block + prev_block and ++ block_tmp = ref_block + prev_block + next_block */ ++ } ++ ++ /* Apply Blake2 on columns of 64-bit words: (0,1,...,15) , then ++ (16,17,..31)... finally (112,113,...127) */ ++ for (i = 0; i < 8; ++i) { ++ BLAKE2_ROUND_NOMSG( ++ blockR.v[16 * i], blockR.v[16 * i + 1], blockR.v[16 * i + 2], ++ blockR.v[16 * i + 3], blockR.v[16 * i + 4], blockR.v[16 * i + 5], ++ blockR.v[16 * i + 6], blockR.v[16 * i + 7], blockR.v[16 * i + 8], ++ blockR.v[16 * i + 9], blockR.v[16 * i + 10], blockR.v[16 * i + 11], ++ blockR.v[16 * i + 12], blockR.v[16 * i + 13], blockR.v[16 * i + 14], ++ blockR.v[16 * i + 15]); ++ } ++ ++ /* Apply Blake2 on rows of 64-bit words: (0,1,16,17,...112,113), then ++ (2,3,18,19,...,114,115).. finally (14,15,30,31,...,126,127) */ ++ for (i = 0; i < 8; i++) { ++ BLAKE2_ROUND_NOMSG( ++ blockR.v[2 * i], blockR.v[2 * i + 1], blockR.v[2 * i + 16], ++ blockR.v[2 * i + 17], blockR.v[2 * i + 32], blockR.v[2 * i + 33], ++ blockR.v[2 * i + 48], blockR.v[2 * i + 49], blockR.v[2 * i + 64], ++ blockR.v[2 * i + 65], blockR.v[2 * i + 80], blockR.v[2 * i + 81], ++ blockR.v[2 * i + 96], blockR.v[2 * i + 97], blockR.v[2 * i + 112], ++ blockR.v[2 * i + 113]); ++ } ++ ++ copy_block(next_block, &block_tmp); ++ xor_block(next_block, &blockR); ++} ++ ++static void next_addresses(block *address_block, block *input_block, ++ const block *zero_block) { ++ input_block->v[6]++; ++ fill_block(zero_block, input_block, address_block, 0); ++ fill_block(zero_block, address_block, address_block, 0); ++} ++ ++void fill_segment(const argon2_instance_t *instance, ++ argon2_position_t position) { ++ block *ref_block = NULL, *curr_block = NULL; ++ block address_block, input_block, zero_block; ++ grub_uint64_t pseudo_rand, ref_index, ref_lane; ++ grub_uint32_t prev_offset, curr_offset; ++ grub_uint32_t starting_index; ++ grub_uint32_t i; ++ int data_independent_addressing; ++ ++ if (instance == NULL) { ++ return; ++ } ++ ++ data_independent_addressing = ++ (instance->type == Argon2_i) || ++ (instance->type == Argon2_id && (position.pass == 0) && ++ (position.slice < ARGON2_SYNC_POINTS / 2)); ++ ++ if (data_independent_addressing) { ++ init_block_value(&zero_block, 0); ++ init_block_value(&input_block, 0); ++ ++ input_block.v[0] = position.pass; ++ input_block.v[1] = position.lane; ++ input_block.v[2] = position.slice; ++ input_block.v[3] = instance->memory_blocks; ++ input_block.v[4] = instance->passes; ++ input_block.v[5] = instance->type; ++ } ++ ++ starting_index = 0; ++ ++ if ((0 == position.pass) && (0 == position.slice)) { ++ starting_index = 2; /* we have already generated the first two blocks */ ++ ++ /* Don't forget to generate the first block of addresses: */ ++ if (data_independent_addressing) { ++ next_addresses(&address_block, &input_block, &zero_block); ++ } ++ } ++ ++ /* Offset of the current block */ ++ curr_offset = position.lane * instance->lane_length + ++ position.slice * instance->segment_length + starting_index; ++ ++ if (0 == curr_offset % instance->lane_length) { ++ /* Last block in this lane */ ++ prev_offset = curr_offset + instance->lane_length - 1; ++ } else { ++ /* Previous block */ ++ prev_offset = curr_offset - 1; ++ } ++ ++ for (i = starting_index; i < instance->segment_length; ++ ++i, ++curr_offset, ++prev_offset) { ++ /*1.1 Rotating prev_offset if needed */ ++ if (curr_offset % instance->lane_length == 1) { ++ prev_offset = curr_offset - 1; ++ } ++ ++ /* 1.2 Computing the index of the reference block */ ++ /* 1.2.1 Taking pseudo-random value from the previous block */ ++ if (data_independent_addressing) { ++ if (i % ARGON2_ADDRESSES_IN_BLOCK == 0) { ++ next_addresses(&address_block, &input_block, &zero_block); ++ } ++ pseudo_rand = address_block.v[i % ARGON2_ADDRESSES_IN_BLOCK]; ++ } else { ++ pseudo_rand = instance->memory[prev_offset].v[0]; ++ } ++ ++ /* 1.2.2 Computing the lane of the reference block */ ++ grub_divmod64 (pseudo_rand >> 32, instance->lanes, &ref_lane); ++ ++ if ((position.pass == 0) && (position.slice == 0)) { ++ /* Can not reference other lanes yet */ ++ ref_lane = position.lane; ++ } ++ ++ /* 1.2.3 Computing the number of possible reference block within the ++ * lane. ++ */ ++ position.index = i; ++ ref_index = index_alpha(instance, &position, pseudo_rand & 0xFFFFFFFF, ++ ref_lane == position.lane); ++ ++ /* 2 Creating a new block */ ++ ref_block = ++ instance->memory + instance->lane_length * ref_lane + ref_index; ++ curr_block = instance->memory + curr_offset; ++ if (ARGON2_VERSION_10 == instance->version) { ++ /* version 1.2.1 and earlier: overwrite, not XOR */ ++ fill_block(instance->memory + prev_offset, ref_block, curr_block, 0); ++ } else { ++ if(0 == position.pass) { ++ fill_block(instance->memory + prev_offset, ref_block, ++ curr_block, 0); ++ } else { ++ fill_block(instance->memory + prev_offset, ref_block, ++ curr_block, 1); ++ } ++ } ++ } ++} +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch b/config/grub/xhci/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch new file mode 100644 index 00000000..5d56bd61 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch @@ -0,0 +1,58 @@ +From 0044d32121bf52c4547c6b3c78f12d7305f57e6b Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 4/6] Error on missing Argon2id parameters + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + grub-core/disk/luks2.c | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c +index d5106402f..bc818ea69 100644 +--- a/grub-core/disk/luks2.c ++++ b/grub-core/disk/luks2.c +@@ -38,6 +38,7 @@ GRUB_MOD_LICENSE ("GPLv3+"); + enum grub_luks2_kdf_type + { + LUKS2_KDF_TYPE_ARGON2I, ++ LUKS2_KDF_TYPE_ARGON2ID, + LUKS2_KDF_TYPE_PBKDF2 + }; + typedef enum grub_luks2_kdf_type grub_luks2_kdf_type_t; +@@ -90,7 +91,7 @@ struct grub_luks2_keyslot + grub_int64_t time; + grub_int64_t memory; + grub_int64_t cpus; +- } argon2i; ++ } argon2; + struct + { + const char *hash; +@@ -160,10 +161,11 @@ luks2_parse_keyslot (grub_luks2_keyslot_t *out, const grub_json_t *keyslot) + return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing or invalid KDF"); + else if (!grub_strcmp (type, "argon2i") || !grub_strcmp (type, "argon2id")) + { +- out->kdf.type = LUKS2_KDF_TYPE_ARGON2I; +- if (grub_json_getint64 (&out->kdf.u.argon2i.time, &kdf, "time") || +- grub_json_getint64 (&out->kdf.u.argon2i.memory, &kdf, "memory") || +- grub_json_getint64 (&out->kdf.u.argon2i.cpus, &kdf, "cpus")) ++ out->kdf.type = !grub_strcmp (type, "argon2i") ++ ? LUKS2_KDF_TYPE_ARGON2I : LUKS2_KDF_TYPE_ARGON2ID; ++ if (grub_json_getint64 (&out->kdf.u.argon2.time, &kdf, "time") || ++ grub_json_getint64 (&out->kdf.u.argon2.memory, &kdf, "memory") || ++ grub_json_getint64 (&out->kdf.u.argon2.cpus, &kdf, "cpus")) + return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing Argon2i parameters"); + } + else if (!grub_strcmp (type, "pbkdf2")) +@@ -459,6 +461,7 @@ luks2_decrypt_key (grub_uint8_t *out_key, + switch (k->kdf.type) + { + case LUKS2_KDF_TYPE_ARGON2I: ++ case LUKS2_KDF_TYPE_ARGON2ID: + ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported"); + goto err; + case LUKS2_KDF_TYPE_PBKDF2: +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch b/config/grub/xhci/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch new file mode 100644 index 00000000..f2e26fd4 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch @@ -0,0 +1,83 @@ +From 0a21695c55f76f1c958bb633481d55b3168562f7 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 5/6] Compile with Argon2id support + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + Makefile.util.def | 6 +++++- + grub-core/Makefile.core.def | 2 +- + grub-core/disk/luks2.c | 13 +++++++++++-- + 3 files changed, 17 insertions(+), 4 deletions(-) + +diff --git a/Makefile.util.def b/Makefile.util.def +index 1e9a13d3e..a167825c3 100644 +--- a/Makefile.util.def ++++ b/Makefile.util.def +@@ -3,7 +3,7 @@ AutoGen definitions Makefile.tpl; + library = { + name = libgrubkern.a; + cflags = '$(CFLAGS_GNULIB)'; +- cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json'; ++ cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json -I$(srcdir)/grub-core/lib/argon2'; + + common = util/misc.c; + common = grub-core/kern/command.c; +@@ -36,6 +36,10 @@ library = { + common = grub-core/kern/misc.c; + common = grub-core/kern/partition.c; + common = grub-core/lib/crypto.c; ++ common = grub-core/lib/argon2/argon2.c; ++ common = grub-core/lib/argon2/core.c; ++ common = grub-core/lib/argon2/ref.c; ++ common = grub-core/lib/argon2/blake2/blake2b.c; + common = grub-core/lib/json/json.c; + common = grub-core/disk/luks.c; + common = grub-core/disk/luks2.c; +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index 4a06789e5..e939dcc99 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -1238,7 +1238,7 @@ module = { + common = disk/luks2.c; + common = lib/gnulib/base64.c; + cflags = '$(CFLAGS_POSIX) $(CFLAGS_GNULIB)'; +- cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json'; ++ cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json -I$(srcdir)/lib/argon2'; + }; + + module = { +diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c +index bc818ea69..5b9eaa599 100644 +--- a/grub-core/disk/luks2.c ++++ b/grub-core/disk/luks2.c +@@ -27,6 +27,7 @@ + #include <grub/partition.h> + #include <grub/i18n.h> + ++#include <argon2.h> + #include <base64.h> + #include <json.h> + +@@ -462,8 +463,16 @@ luks2_decrypt_key (grub_uint8_t *out_key, + { + case LUKS2_KDF_TYPE_ARGON2I: + case LUKS2_KDF_TYPE_ARGON2ID: +- ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported"); +- goto err; ++ ret = argon2_hash (k->kdf.u.argon2.time, k->kdf.u.argon2.memory, k->kdf.u.argon2.cpus, ++ passphrase, passphraselen, salt, saltlen, area_key, k->area.key_size, ++ k->kdf.type == LUKS2_KDF_TYPE_ARGON2I ? Argon2_i : Argon2_id, ++ ARGON2_VERSION_NUMBER); ++ if (ret) ++ { ++ grub_dprintf ("luks2", "Argon2 failed: %s\n", argon2_error_message (ret)); ++ goto err; ++ } ++ break; + case LUKS2_KDF_TYPE_PBKDF2: + hash = grub_crypto_lookup_md_by_name (k->kdf.u.pbkdf2.hash); + if (!hash) +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch b/config/grub/xhci/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch new file mode 100644 index 00000000..dc65b7a6 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch @@ -0,0 +1,26 @@ +From 6c9a6625c0dc038d1bdbdc13665f40e269e86496 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 6/6] Make grub-install work with Argon2 + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + util/grub-install.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/util/grub-install.c b/util/grub-install.c +index 1ad04db36..a8a3330b8 100644 +--- a/util/grub-install.c ++++ b/util/grub-install.c +@@ -448,6 +448,8 @@ probe_mods (grub_disk_t disk) + { + grub_util_cryptodisk_get_abstraction (disk, + push_cryptodisk_module, NULL); ++ /* HACK: always push argon2 */ ++ grub_install_push_module ("argon2"); + have_abstractions = 1; + have_cryptodisk = 1; + } +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch b/config/grub/xhci/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch new file mode 100644 index 00000000..21e8630b --- /dev/null +++ b/config/grub/xhci/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch @@ -0,0 +1,107 @@ +From 96c0bbe5d406b616360a7fce7cee67d7692c0d6d Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Mon, 30 Oct 2023 22:19:21 +0000 +Subject: [PATCH 1/1] at_keyboard coreboot: force scancodes2+translate + +Scan code set 2 with translation should be assumed in +every case, as the default starting position. + +However, GRUB is trying to detect and use other modes +such as set 2 without translation, or set 1 without +translation from set 2; it also detects no-mode and +assumes mode 1, on really old keyboards. + +The current behaviour has been retained, for everything +except GRUB_MACHINE_COREBOOT; for the latter, scan code +set 2 with translation is hardcoded, and forced in code. + +This is required to make keyboard initialisation work on +the MEC5035 EC used by the Dell Latitude E6400, when +running GRUB as a coreboot payload on that laptop. The +EC reports scancode set 2 with translation when probed, +but actually only outputs scancode set 1. + +Since GRUB is attempting to use it without translation, +and since the machine reports set 2 with translation, +but only ever outputs set 1 scancodes, this results in +wrong keypresses for every key. + +This fix fixed that, by forcing set 2 with translation, +treating it as set 1, but only on coreboot. This is the +same behaviour used in GNU+Linux systems and SeaBIOS. +With this change, GRUB keyboard initialisation now works +just fine on those machines. + +This has *also* been tested on other coreboot machines +running GRUB; several HP EliteBooks, ThinkPads and +Dell Precision T1650. All seems to work just fine. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/term/at_keyboard.c | 20 ++++++++++++++++++-- + 1 file changed, 18 insertions(+), 2 deletions(-) + +diff --git a/grub-core/term/at_keyboard.c b/grub-core/term/at_keyboard.c +index f8a129eb7..8207225c2 100644 +--- a/grub-core/term/at_keyboard.c ++++ b/grub-core/term/at_keyboard.c +@@ -138,6 +138,7 @@ write_mode (int mode) + return (i != GRUB_AT_TRIES); + } + ++#if !defined (GRUB_MACHINE_COREBOOT) + static int + query_mode (void) + { +@@ -161,10 +162,12 @@ query_mode (void) + return 3; + return 0; + } ++#endif + + static void + set_scancodes (void) + { ++#if !defined (GRUB_MACHINE_COREBOOT) + /* You must have visited computer museum. Keyboard without scancode set + knowledge. Assume XT. */ + if (!grub_keyboard_orig_set) +@@ -173,20 +176,33 @@ set_scancodes (void) + ps2_state.current_set = 1; + return; + } ++#endif + + #if !USE_SCANCODE_SET + ps2_state.current_set = 1; + return; +-#else ++#endif + ++#if defined (GRUB_MACHINE_COREBOOT) ++ /* enable translation */ ++ grub_keyboard_controller_write (grub_keyboard_controller_orig ++ & ~KEYBOARD_AT_DISABLE); ++#else ++ /* if not coreboot, disable translation and try mode 2 first, before 1 */ + grub_keyboard_controller_write (grub_keyboard_controller_orig + & ~KEYBOARD_AT_TRANSLATE + & ~KEYBOARD_AT_DISABLE); ++#endif + + keyboard_controller_wait_until_ready (); + grub_outb (KEYBOARD_COMMAND_ENABLE, KEYBOARD_REG_DATA); +- + write_mode (2); ++ ++#if defined (GRUB_MACHINE_COREBOOT) ++ /* mode 2 with translation, so make grub treat as set 1 */ ++ ps2_state.current_set = 1; ++#else ++ /* if not coreboot, translation isn't set; test 2 and fall back to 1 */ + ps2_state.current_set = query_mode (); + grub_dprintf ("atkeyb", "returned set %d\n", ps2_state.current_set); + if (ps2_state.current_set == 2) +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch b/config/grub/xhci/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch new file mode 100644 index 00000000..fbef86a4 --- /dev/null +++ b/config/grub/xhci/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch @@ -0,0 +1,38 @@ +From 0a6abeb40ac4284fbff6ef5958989d561b6290a7 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Tue, 31 Oct 2023 10:33:28 +0000 +Subject: [PATCH 1/1] keylayouts: don't print "Unknown key" message + +on keyboards with stuck keys, this results in GRUB just +spewing it repeatedly, preventing use of GRUB. + +in such cases, it's still possible to use the keyboard, +and we should let the user at least boot. + +it often appears when people plug in faulty usb keyboards, +but can appear for laptop keyboards too; one of my e6400 +has stuck keys. + +with this patch, grub should be a bit more reliable in +terms of user experience, when the keyboard is faulty. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/commands/keylayouts.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/grub-core/commands/keylayouts.c b/grub-core/commands/keylayouts.c +index aa3ba34f2..445fa0601 100644 +--- a/grub-core/commands/keylayouts.c ++++ b/grub-core/commands/keylayouts.c +@@ -174,7 +174,6 @@ grub_term_map_key (grub_keyboard_key_t code, int status) + key = map_key_core (code, status, &alt_gr_consumed); + + if (key == 0 || key == GRUB_TERM_SHIFT) { +- grub_printf ("Unknown key 0x%x detected\n", code); + return GRUB_TERM_NO_KEY; + } + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch b/config/grub/xhci/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch new file mode 100644 index 00000000..25091d16 --- /dev/null +++ b/config/grub/xhci/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch @@ -0,0 +1,102 @@ +From 9e7a651a0f15f2e9dec65a77765c3c4fd97b4165 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 5 Nov 2023 16:14:58 +0000 +Subject: [PATCH 1/1] don't print missing prefix errors on the screen + +we do actually set the prefix. this patch modifies +grub to still set grub_errno and return accordingly, +so the behaviour is otherwise identical, but it will +no longer print a warning message on the screen. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/commands/keylayouts.c | 2 +- + grub-core/commands/loadenv.c | 2 +- + grub-core/commands/nativedisk.c | 2 +- + grub-core/efiemu/main.c | 3 +-- + grub-core/font/font.c | 2 +- + grub-core/kern/dl.c | 2 +- + 6 files changed, 6 insertions(+), 7 deletions(-) + +diff --git a/grub-core/commands/keylayouts.c b/grub-core/commands/keylayouts.c +index 445fa0601..00bcf7025 100644 +--- a/grub-core/commands/keylayouts.c ++++ b/grub-core/commands/keylayouts.c +@@ -211,7 +211,7 @@ grub_cmd_keymap (struct grub_command *cmd __attribute__ ((unused)), + { + const char *prefix = grub_env_get ("prefix"); + if (!prefix) +- return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("variable `%s' isn't set"), "prefix"); ++ return (grub_errno = GRUB_ERR_BAD_ARGUMENT); + filename = grub_xasprintf ("%s/layouts/%s.gkb", prefix, argv[0]); + if (!filename) + return grub_errno; +diff --git a/grub-core/commands/loadenv.c b/grub-core/commands/loadenv.c +index 166445849..699b39bfa 100644 +--- a/grub-core/commands/loadenv.c ++++ b/grub-core/commands/loadenv.c +@@ -58,7 +58,7 @@ open_envblk_file (char *filename, + prefix = grub_env_get ("prefix"); + if (! prefix) + { +- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ grub_errno = GRUB_ERR_FILE_NOT_FOUND; + return 0; + } + +diff --git a/grub-core/commands/nativedisk.c b/grub-core/commands/nativedisk.c +index 580c8d3b0..6806bff9c 100644 +--- a/grub-core/commands/nativedisk.c ++++ b/grub-core/commands/nativedisk.c +@@ -186,7 +186,7 @@ grub_cmd_nativedisk (grub_command_t cmd __attribute__ ((unused)), + prefix = grub_env_get ("prefix"); + + if (! prefix) +- return grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ return (grub_errno = GRUB_ERR_FILE_NOT_FOUND); + + if (prefix) + path_prefix = (prefix[0] == '(') ? grub_strchr (prefix, ')') : NULL; +diff --git a/grub-core/efiemu/main.c b/grub-core/efiemu/main.c +index e7037f4ed..e5d4dbff1 100644 +--- a/grub-core/efiemu/main.c ++++ b/grub-core/efiemu/main.c +@@ -231,8 +231,7 @@ grub_efiemu_autocore (void) + prefix = grub_env_get ("prefix"); + + if (! prefix) +- return grub_error (GRUB_ERR_FILE_NOT_FOUND, +- N_("variable `%s' isn't set"), "prefix"); ++ return (grub_errno = GRUB_ERR_FILE_NOT_FOUND); + + suffix = grub_efiemu_get_default_core_name (); + +diff --git a/grub-core/font/font.c b/grub-core/font/font.c +index 18de52562..2a0fea6c8 100644 +--- a/grub-core/font/font.c ++++ b/grub-core/font/font.c +@@ -461,7 +461,7 @@ grub_font_load (const char *filename) + + if (!prefix) + { +- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ grub_errno = GRUB_ERR_FILE_NOT_FOUND; + goto fail; + } + file = try_open_from_prefix (prefix, filename); +diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c +index 4011e2d15..af3bd00d0 100644 +--- a/grub-core/kern/dl.c ++++ b/grub-core/kern/dl.c +@@ -758,7 +758,7 @@ grub_dl_load (const char *name) + return 0; + + if (! grub_dl_dir) { +- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ grub_errno = GRUB_ERR_FILE_NOT_FOUND; + return 0; + } + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch b/config/grub/xhci/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch new file mode 100644 index 00000000..f4cf939e --- /dev/null +++ b/config/grub/xhci/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch @@ -0,0 +1,34 @@ +From 6237c5762edccc1e1fa4746b1d4aa5e8d81e4883 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 5 Nov 2023 16:36:22 +0000 +Subject: [PATCH 1/1] don't print error if module not found + +still set grub_errno accordingly, and otherwise +behave the same. in libreboot, we remove a lot of +modules but then rely on loading a grub.cfg +provided by a distro; in almost all cases that works, +but also in almost all cases, that will try to load +a module we don't actually need, but then it prints +a message. this can annoy some users, so silence it. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/kern/dl.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c +index af3bd00d0..21d0cedb1 100644 +--- a/grub-core/kern/dl.c ++++ b/grub-core/kern/dl.c +@@ -486,7 +486,7 @@ grub_dl_resolve_name (grub_dl_t mod, Elf_Ehdr *e) + + s = grub_dl_find_section (e, ".modname"); + if (!s) +- return grub_error (GRUB_ERR_BAD_MODULE, "no module name found"); ++ return (grub_errno = GRUB_ERR_BAD_MODULE); + + mod->name = grub_strdup ((char *) e + s->sh_offset); + if (! mod->name) +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch b/config/grub/xhci/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch new file mode 100644 index 00000000..25221c9c --- /dev/null +++ b/config/grub/xhci/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch @@ -0,0 +1,31 @@ +From e5b7ec81421487e71bcaf8b6b5a27f3649a62753 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 5 Nov 2023 17:25:20 +0000 +Subject: [PATCH 1/1] don't print empty error messages + +this is part two of the quest to kill the prefix +error message. after i disabled prefix-related +messages, it still printed "error: ." on screen. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/kern/err.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/grub-core/kern/err.c b/grub-core/kern/err.c +index 53c734de7..7cac53983 100644 +--- a/grub-core/kern/err.c ++++ b/grub-core/kern/err.c +@@ -107,7 +107,8 @@ grub_print_error (void) + { + if (grub_errno != GRUB_ERR_NONE) + { +- grub_err_printf (_("error: %s.\n"), grub_errmsg); ++ if (grub_strlen(grub_errmsg) > 0) ++ grub_err_printf (_("error: %s.\n"), grub_errmsg); + grub_err_printed_errors++; + } + } +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0001-grub-core-bus-usb-Parse-SuperSpeed-companion-descrip.patch b/config/grub/xhci/patches/0005-xhci/0001-grub-core-bus-usb-Parse-SuperSpeed-companion-descrip.patch new file mode 100644 index 00000000..f533269f --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0001-grub-core-bus-usb-Parse-SuperSpeed-companion-descrip.patch @@ -0,0 +1,245 @@ +From 90c9011f2e0350a97e3df44b0fc6dd022e04c276 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:00:27 +0100 +Subject: [PATCH 1/8] grub-core/bus/usb: Parse SuperSpeed companion descriptors + +Parse the SS_ENDPOINT_COMPANION descriptor, which is only present on USB 3.0 +capable devices and xHCI controllers. Make the descendp an array of pointers +to the endpoint descriptor as it's no longer an continous array. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/serial/common.c | 2 +- + grub-core/bus/usb/usb.c | 44 +++++++++++++++++++------------ + grub-core/bus/usb/usbhub.c | 22 ++++++++++++---- + grub-core/commands/usbtest.c | 2 +- + grub-core/disk/usbms.c | 2 +- + grub-core/term/usb_keyboard.c | 2 +- + include/grub/usb.h | 2 +- + include/grub/usbdesc.h | 11 +++++++- + 8 files changed, 59 insertions(+), 28 deletions(-) + +diff --git a/grub-core/bus/usb/serial/common.c b/grub-core/bus/usb/serial/common.c +index e9c995a0a..fc847d66d 100644 +--- a/grub-core/bus/usb/serial/common.c ++++ b/grub-core/bus/usb/serial/common.c +@@ -72,7 +72,7 @@ grub_usbserial_attach (grub_usb_device_t usbdev, int configno, int interfno, + for (j = 0; j < interf->endpointcnt; j++) + { + struct grub_usb_desc_endp *endp; +- endp = &usbdev->config[0].interf[interfno].descendp[j]; ++ endp = usbdev->config[0].interf[interfno].descendp[j]; + + if ((endp->endp_addr & 128) && (endp->attrib & 3) == 2 + && (in_endp == GRUB_USB_SERIAL_ENDPOINT_LAST_MATCHING +diff --git a/grub-core/bus/usb/usb.c b/grub-core/bus/usb/usb.c +index 7bd49d201..e578af793 100644 +--- a/grub-core/bus/usb/usb.c ++++ b/grub-core/bus/usb/usb.c +@@ -118,7 +118,7 @@ grub_usb_device_initialize (grub_usb_device_t dev) + struct grub_usb_desc_device *descdev; + struct grub_usb_desc_config config; + grub_usb_err_t err; +- int i; ++ int i, j; + + /* First we have to read first 8 bytes only and determine + * max. size of packet */ +@@ -152,6 +152,7 @@ grub_usb_device_initialize (grub_usb_device_t dev) + int currif; + char *data; + struct grub_usb_desc *desc; ++ struct grub_usb_desc_endp *endp; + + /* First just read the first 4 bytes of the configuration + descriptor, after that it is known how many bytes really have +@@ -201,24 +202,27 @@ grub_usb_device_initialize (grub_usb_device_t dev) + = (struct grub_usb_desc_if *) &data[pos]; + pos += dev->config[i].interf[currif].descif->length; + ++ dev->config[i].interf[currif].descendp = grub_malloc ( ++ dev->config[i].interf[currif].descif->endpointcnt * ++ sizeof(struct grub_usb_desc_endp)); ++ ++ j = 0; + while (pos < config.totallen) + { + desc = (struct grub_usb_desc *)&data[pos]; +- if (desc->type == GRUB_USB_DESCRIPTOR_ENDPOINT) +- break; +- if (!desc->length) +- { +- err = GRUB_USB_ERR_BADDEVICE; +- goto fail; +- } +- pos += desc->length; +- } +- +- /* Point to the first endpoint. */ +- dev->config[i].interf[currif].descendp +- = (struct grub_usb_desc_endp *) &data[pos]; +- pos += (sizeof (struct grub_usb_desc_endp) +- * dev->config[i].interf[currif].descif->endpointcnt); ++ if (desc->type == GRUB_USB_DESCRIPTOR_ENDPOINT) { ++ endp = (struct grub_usb_desc_endp *) &data[pos]; ++ dev->config[i].interf[currif].descendp[j++] = endp; ++ pos += desc->length; ++ } else { ++ if (!desc->length) ++ { ++ err = GRUB_USB_ERR_BADDEVICE; ++ goto fail; ++ } ++ pos += desc->length; ++ } ++ } + } + } + +@@ -226,8 +230,14 @@ grub_usb_device_initialize (grub_usb_device_t dev) + + fail: + +- for (i = 0; i < GRUB_USB_MAX_CONF; i++) ++ for (i = 0; i < GRUB_USB_MAX_CONF; i++) { ++ int currif; ++ ++ for (currif = 0; currif < dev->config[i].descconf->numif; currif++) ++ grub_free (dev->config[i].interf[currif].descendp); ++ + grub_free (dev->config[i].descconf); ++ } + + return err; + } +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index f5608e330..2ae29cba1 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -82,8 +82,14 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + if (i == GRUB_USBHUB_MAX_DEVICES) + { + grub_error (GRUB_ERR_IO, "can't assign address to USB device"); +- for (i = 0; i < GRUB_USB_MAX_CONF; i++) +- grub_free (dev->config[i].descconf); ++ for (i = 0; i < GRUB_USB_MAX_CONF; i++) { ++ int currif; ++ ++ for (currif = 0; currif < dev->config[i].descconf->numif; currif++) ++ grub_free (dev->config[i].interf[currif].descendp); ++ ++ grub_free (dev->config[i].descconf); ++ } + grub_free (dev); + return NULL; + } +@@ -96,8 +102,14 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + i, 0, 0, NULL); + if (err) + { +- for (i = 0; i < GRUB_USB_MAX_CONF; i++) +- grub_free (dev->config[i].descconf); ++ for (i = 0; i < GRUB_USB_MAX_CONF; i++) { ++ int currif; ++ ++ for (currif = 0; currif < dev->config[i].descconf->numif; currif++) ++ grub_free (dev->config[i].interf[currif].descendp); ++ ++ grub_free (dev->config[i].descconf); ++ } + grub_free (dev); + return NULL; + } +@@ -176,7 +188,7 @@ grub_usb_add_hub (grub_usb_device_t dev) + i++) + { + struct grub_usb_desc_endp *endp = NULL; +- endp = &dev->config[0].interf[0].descendp[i]; ++ endp = dev->config[0].interf[0].descendp[i]; + + if ((endp->endp_addr & 128) && grub_usb_get_ep_type(endp) + == GRUB_USB_EP_INTERRUPT) +diff --git a/grub-core/commands/usbtest.c b/grub-core/commands/usbtest.c +index 2c6d93fe6..55a657635 100644 +--- a/grub-core/commands/usbtest.c ++++ b/grub-core/commands/usbtest.c +@@ -185,7 +185,7 @@ usb_iterate (grub_usb_device_t dev, void *data __attribute__ ((unused))) + for (j = 0; j < interf->endpointcnt; j++) + { + struct grub_usb_desc_endp *endp; +- endp = &dev->config[0].interf[i].descendp[j]; ++ endp = dev->config[0].interf[i].descendp[j]; + + grub_printf ("Endpoint #%d: %s, max packed size: %d, transfer type: %s, latency: %d\n", + endp->endp_addr & 15, +diff --git a/grub-core/disk/usbms.c b/grub-core/disk/usbms.c +index b81e3ad9d..b1512dc12 100644 +--- a/grub-core/disk/usbms.c ++++ b/grub-core/disk/usbms.c +@@ -184,7 +184,7 @@ grub_usbms_attach (grub_usb_device_t usbdev, int configno, int interfno) + for (j = 0; j < interf->endpointcnt; j++) + { + struct grub_usb_desc_endp *endp; +- endp = &usbdev->config[0].interf[interfno].descendp[j]; ++ endp = usbdev->config[0].interf[interfno].descendp[j]; + + if ((endp->endp_addr & 128) && (endp->attrib & 3) == 2) + /* Bulk IN endpoint. */ +diff --git a/grub-core/term/usb_keyboard.c b/grub-core/term/usb_keyboard.c +index 7322d8dff..d590979f5 100644 +--- a/grub-core/term/usb_keyboard.c ++++ b/grub-core/term/usb_keyboard.c +@@ -175,7 +175,7 @@ grub_usb_keyboard_attach (grub_usb_device_t usbdev, int configno, int interfno) + for (j = 0; j < usbdev->config[configno].interf[interfno].descif->endpointcnt; + j++) + { +- endp = &usbdev->config[configno].interf[interfno].descendp[j]; ++ endp = usbdev->config[configno].interf[interfno].descendp[j]; + + if ((endp->endp_addr & 128) && grub_usb_get_ep_type(endp) + == GRUB_USB_EP_INTERRUPT) +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 0f346af12..688c11f6d 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -153,7 +153,7 @@ struct grub_usb_interface + { + struct grub_usb_desc_if *descif; + +- struct grub_usb_desc_endp *descendp; ++ struct grub_usb_desc_endp **descendp; + + /* A driver is handling this interface. Do we need to support multiple drivers + for single interface? +diff --git a/include/grub/usbdesc.h b/include/grub/usbdesc.h +index aac5ab05a..bb2ab2e27 100644 +--- a/include/grub/usbdesc.h ++++ b/include/grub/usbdesc.h +@@ -29,7 +29,8 @@ typedef enum { + GRUB_USB_DESCRIPTOR_INTERFACE, + GRUB_USB_DESCRIPTOR_ENDPOINT, + GRUB_USB_DESCRIPTOR_DEBUG = 10, +- GRUB_USB_DESCRIPTOR_HUB = 0x29 ++ GRUB_USB_DESCRIPTOR_HUB = 0x29, ++ GRUB_USB_DESCRIPTOR_SS_ENDPOINT_COMPANION = 0x30 + } grub_usb_descriptor_t; + + struct grub_usb_desc +@@ -105,6 +106,14 @@ struct grub_usb_desc_endp + grub_uint8_t interval; + } GRUB_PACKED; + ++struct grub_usb_desc_ssep { ++ grub_uint8_t length; ++ grub_uint8_t type; ++ grub_uint8_t maxburst; ++ grub_uint8_t attrib; ++ grub_uint16_t interval; ++} GRUB_PACKED; ++ + struct grub_usb_desc_str + { + grub_uint8_t length; +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0002-usb-Add-enum-for-xHCI.patch b/config/grub/xhci/patches/0005-xhci/0002-usb-Add-enum-for-xHCI.patch new file mode 100644 index 00000000..d61da615 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0002-usb-Add-enum-for-xHCI.patch @@ -0,0 +1,29 @@ +From e111983ca5e2a52bfe2bdc5cd639b06bb2f7902d Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:47:06 +0100 +Subject: [PATCH 2/8] usb: Add enum for xHCI + +Will be used in future patches. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + include/grub/usb.h | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 688c11f6d..ea6ee8c2c 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -51,7 +51,8 @@ typedef enum + GRUB_USB_SPEED_NONE, + GRUB_USB_SPEED_LOW, + GRUB_USB_SPEED_FULL, +- GRUB_USB_SPEED_HIGH ++ GRUB_USB_SPEED_HIGH, ++ GRUB_USB_SPEED_SUPER + } grub_usb_speed_t; + + typedef int (*grub_usb_iterate_hook_t) (grub_usb_device_t dev, void *data); +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0003-usbtrans-Set-default-maximum-packet-size.patch b/config/grub/xhci/patches/0005-xhci/0003-usbtrans-Set-default-maximum-packet-size.patch new file mode 100644 index 00000000..70e73ca2 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0003-usbtrans-Set-default-maximum-packet-size.patch @@ -0,0 +1,33 @@ +From 3e25c83a1d1c6e149c7e9f0660ddadb2beca2476 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:48:03 +0100 +Subject: [PATCH 3/8] usbtrans: Set default maximum packet size + +Set the maximum packet size to 512 for SuperSpeed devices. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/usbtrans.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/grub-core/bus/usb/usbtrans.c b/grub-core/bus/usb/usbtrans.c +index c5680b33a..c1080bb33 100644 +--- a/grub-core/bus/usb/usbtrans.c ++++ b/grub-core/bus/usb/usbtrans.c +@@ -128,8 +128,12 @@ grub_usb_control_msg (grub_usb_device_t dev, + setupdata_addr = grub_dma_get_phys (setupdata_chunk); + + /* Determine the maximum packet size. */ +- if (dev->descdev.maxsize0) ++ if (dev->descdev.maxsize0 && dev->speed != GRUB_USB_SPEED_SUPER) + max = dev->descdev.maxsize0; ++ else if (dev->descdev.maxsize0 && dev->speed == GRUB_USB_SPEED_SUPER) ++ max = 1UL << dev->descdev.maxsize0; ++ else if (dev->speed == GRUB_USB_SPEED_SUPER) ++ max = 512; + else + max = 64; + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0004-grub-core-bus-usb-Add-function-pointer-for-attach-de.patch b/config/grub/xhci/patches/0005-xhci/0004-grub-core-bus-usb-Add-function-pointer-for-attach-de.patch new file mode 100644 index 00000000..a090e0ea --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0004-grub-core-bus-usb-Add-function-pointer-for-attach-de.patch @@ -0,0 +1,121 @@ +From 89701aba00caa81bb566ab10da0c89264393be30 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:51:42 +0100 +Subject: [PATCH 4/8] grub-core/bus/usb: Add function pointer for attach/detach + events + +The xHCI code needs to be called for attaching or detaching a device. +Introduce two functions pointers and call it from the USB hub code. + +Will be used in future commits, currently this doesn't change any functionality. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/ehci.c | 2 ++ + grub-core/bus/usb/ohci.c | 2 ++ + grub-core/bus/usb/uhci.c | 2 ++ + grub-core/bus/usb/usbhub.c | 19 +++++++++++++++++++ + include/grub/usb.h | 4 ++++ + 5 files changed, 29 insertions(+) + +diff --git a/grub-core/bus/usb/ehci.c b/grub-core/bus/usb/ehci.c +index 9abebc6bd..953b851c0 100644 +--- a/grub-core/bus/usb/ehci.c ++++ b/grub-core/bus/usb/ehci.c +@@ -1812,6 +1812,8 @@ static struct grub_usb_controller_dev usb_controller = { + .hubports = grub_ehci_hubports, + .portstatus = grub_ehci_portstatus, + .detect_dev = grub_ehci_detect_dev, ++ .attach_dev = NULL, ++ .detach_dev = NULL, + /* estimated max. count of TDs for one bulk transfer */ + .max_bulk_tds = GRUB_EHCI_N_TD * 3 / 4 + }; +diff --git a/grub-core/bus/usb/ohci.c b/grub-core/bus/usb/ohci.c +index 5363a61f6..7a3f3e154 100644 +--- a/grub-core/bus/usb/ohci.c ++++ b/grub-core/bus/usb/ohci.c +@@ -1440,6 +1440,8 @@ static struct grub_usb_controller_dev usb_controller = + .hubports = grub_ohci_hubports, + .portstatus = grub_ohci_portstatus, + .detect_dev = grub_ohci_detect_dev, ++ .attach_dev = NULL, ++ .detach_dev = NULL, + /* estimated max. count of TDs for one bulk transfer */ + .max_bulk_tds = GRUB_OHCI_TDS * 3 / 4 + }; +diff --git a/grub-core/bus/usb/uhci.c b/grub-core/bus/usb/uhci.c +index 0fdea4c1e..03c4605b2 100644 +--- a/grub-core/bus/usb/uhci.c ++++ b/grub-core/bus/usb/uhci.c +@@ -845,6 +845,8 @@ static struct grub_usb_controller_dev usb_controller = + .hubports = grub_uhci_hubports, + .portstatus = grub_uhci_portstatus, + .detect_dev = grub_uhci_detect_dev, ++ .attach_dev = NULL, ++ .detach_dev = NULL, + /* estimated max. count of TDs for one bulk transfer */ + .max_bulk_tds = N_TD * 3 / 4 + }; +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index 2ae29cba1..8e963e84b 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -66,6 +66,15 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + dev->split_hubport = split_hubport; + dev->split_hubaddr = split_hubaddr; + ++ if (controller->dev->attach_dev) { ++ err = controller->dev->attach_dev (controller, dev); ++ if (err) ++ { ++ grub_free (dev); ++ return NULL; ++ } ++ } ++ + err = grub_usb_device_initialize (dev); + if (err) + { +@@ -405,6 +414,8 @@ static void + detach_device (grub_usb_device_t dev) + { + unsigned i; ++ grub_usb_err_t err; ++ + int k; + if (!dev) + return; +@@ -425,6 +436,14 @@ detach_device (grub_usb_device_t dev) + if (inter && inter->detach_hook) + inter->detach_hook (dev, i, k); + } ++ if (dev->controller.dev->detach_dev) { ++ err = dev->controller.dev->detach_dev (&dev->controller, dev); ++ if (err) ++ { ++ // XXX ++ } ++ } ++ + grub_usb_devs[dev->addr] = 0; + } + +diff --git a/include/grub/usb.h b/include/grub/usb.h +index ea6ee8c2c..4dd179db2 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -126,6 +126,10 @@ struct grub_usb_controller_dev + + grub_usb_speed_t (*detect_dev) (grub_usb_controller_t dev, int port, int *changed); + ++ grub_usb_err_t (*attach_dev) (grub_usb_controller_t ctrl, grub_usb_device_t dev); ++ ++ grub_usb_err_t (*detach_dev) (grub_usb_controller_t ctrl, grub_usb_device_t dev); ++ + /* Per controller flag - port reset pending, don't do another reset */ + grub_uint64_t pending_reset; + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0005-grub-core-bus-usb-usbhub-Add-new-private-fields-for-.patch b/config/grub/xhci/patches/0005-xhci/0005-grub-core-bus-usb-usbhub-Add-new-private-fields-for-.patch new file mode 100644 index 00000000..7d69c3a6 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0005-grub-core-bus-usb-usbhub-Add-new-private-fields-for-.patch @@ -0,0 +1,77 @@ +From 5e5d74a4531770258e21dedd45c33f1a9d3afa6b Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:54:40 +0100 +Subject: [PATCH 5/8] grub-core/bus/usb/usbhub: Add new private fields for xHCI + controller + +Store the root port number, the route, consisting out of the port ID +in each nibble, and a pointer to driver private data. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/usbhub.c | 11 ++++++++--- + include/grub/usb.h | 5 +++++ + 2 files changed, 13 insertions(+), 3 deletions(-) + +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index 8e963e84b..b4b3a1a61 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -49,7 +49,9 @@ static grub_usb_controller_dev_t grub_usb_list; + static grub_usb_device_t + grub_usb_hub_add_dev (grub_usb_controller_t controller, + grub_usb_speed_t speed, +- int split_hubport, int split_hubaddr) ++ int split_hubport, int split_hubaddr, ++ int root_portno, ++ grub_uint32_t route) + { + grub_usb_device_t dev; + int i; +@@ -65,6 +67,8 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + dev->speed = speed; + dev->split_hubport = split_hubport; + dev->split_hubaddr = split_hubaddr; ++ dev->root_port = root_portno; ++ dev->route = route; + + if (controller->dev->attach_dev) { + err = controller->dev->attach_dev (controller, dev); +@@ -245,7 +249,7 @@ attach_root_port (struct grub_usb_hub *hub, int portno, + and full/low speed device connected to OHCI/UHCI needs not + transaction translation - e.g. hubport and hubaddr should be + always none (zero) for any device connected to any root hub. */ +- dev = grub_usb_hub_add_dev (hub->controller, speed, 0, 0); ++ dev = grub_usb_hub_add_dev (hub->controller, speed, 0, 0, portno, 0); + hub->controller->dev->pending_reset = 0; + npending--; + if (! dev) +@@ -676,7 +680,8 @@ poll_nonroot_hub (grub_usb_device_t dev) + + /* Add the device and assign a device address to it. */ + next_dev = grub_usb_hub_add_dev (&dev->controller, speed, +- split_hubport, split_hubaddr); ++ split_hubport, split_hubaddr, dev->root_port, ++ dev->route << 4 | (i & 0xf)); + if (dev->controller.dev->pending_reset) + { + dev->controller.dev->pending_reset = 0; +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 4dd179db2..609faf7d0 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -237,6 +237,11 @@ struct grub_usb_device + int split_hubport; + + int split_hubaddr; ++ ++ /* xHCI specific information */ ++ int root_port; ++ grub_uint32_t route; ++ void *xhci_priv; + }; + + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0006-grub-core-bus-usb-Add-xhci-support.patch b/config/grub/xhci/patches/0005-xhci/0006-grub-core-bus-usb-Add-xhci-support.patch new file mode 100644 index 00000000..11df42d8 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0006-grub-core-bus-usb-Add-xhci-support.patch @@ -0,0 +1,2814 @@ +From fe3a0bce527e059e9121eb5ad2c3cc099f07a4bf Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:59:25 +0100 +Subject: [PATCH 6/8] grub-core/bus/usb: Add xhci support + +Add support for xHCI USB controllers. +The code is based on seabios implementation, but has been heavily +modified to match grubs internals. + +Changes done in version 2: +* Code cleanup +* Code style fixes +* Don't leak memory buffers +* Compile without warnings +* Add more defines +* Add more helper functions +* Don't assume a 1:1 virtual to physical mapping +* Flush cachelines after writing buffers +* Don't use hardcoded page size +* Proper scratchpad register setup +* xHCI bios ownership handoff + +Changes done in version 3: +* Fixed a race condition detecting events, which doesn't appear on + qemu based xHCI controllers +* Don't accidently disable USB3.0 devices after first command +* Support arbitrary protocol speed IDs +* Coding style cleanup + +Tested: +* Qemu system x86_64 + * virtual USB HID keyboard (usb-kbd) + * virtual USB HID mass storage (usb-storage) +* init Supermicro X11SSH-F + * iKVM HID keyboard + * USB3 HID mass storage (controller root port) + * USB HID keyboard + +TODO: + * Test on more hardware + * Test on USB3 hubs + * Support for USB 3.1 and USB 3.2 controllers + +Tested on qemu using coreboot and grub as payload: + +qemu-system-x86_64 -M q35 -bios $firmware -device qemu-xhci,id=xhci -accel kvm -m 1024M \ + -device usb-storage,drive=thumbdrive,bus=xhci.0,port=3 \ + -drive if=none,format=raw,id=thumbdrive,file=ubuntu-20.04.1-desktop-amd64.iso \ + -device usb-kbd,bus=xhci.0 + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +Signed-off-by: sylv <sylv@sylv.io> +--- + Makefile.am | 2 +- + grub-core/Makefile.core.def | 7 + + grub-core/bus/usb/xhci-pci.c | 195 +++ + grub-core/bus/usb/xhci.c | 2496 ++++++++++++++++++++++++++++++++++ + include/grub/usb.h | 4 + + 5 files changed, 2703 insertions(+), 1 deletion(-) + create mode 100644 grub-core/bus/usb/xhci-pci.c + create mode 100644 grub-core/bus/usb/xhci.c + +diff --git a/Makefile.am b/Makefile.am +index 43635d5ff..65016f856 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -434,7 +434,7 @@ if COND_i386_coreboot + FS_PAYLOAD_MODULES ?= $(shell cat grub-core/fs.lst) + default_payload.elf: grub-mkstandalone grub-mkimage FORCE + test -f $@ && rm $@ || true +- pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg ++ pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata xhci ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg + endif + + endif +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index fb6078a34..64c3806ab 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -667,6 +667,13 @@ module = { + enable = arm_coreboot; + }; + ++module = { ++ name = xhci; ++ common = bus/usb/xhci.c; ++ pci = bus/usb/xhci-pci.c; ++ enable = pci; ++}; ++ + module = { + name = pci; + common = bus/pci.c; +diff --git a/grub-core/bus/usb/xhci-pci.c b/grub-core/bus/usb/xhci-pci.c +new file mode 100644 +index 000000000..a5bd3c97d +--- /dev/null ++++ b/grub-core/bus/usb/xhci-pci.c +@@ -0,0 +1,195 @@ ++/* xhci.c - XHCI Support. */ ++/* ++ * GRUB -- GRand Unified Bootloader ++ * Copyright (C) 2020 9elements Cyber Security ++ * ++ * GRUB is free software: you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation, either version 3 of the License, or ++ * (at your option) any later version. ++ * ++ * GRUB is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with GRUB. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <grub/pci.h> ++#include <grub/cpu/pci.h> ++#include <grub/cs5536.h> ++#include <grub/misc.h> ++#include <grub/mm.h> ++#include <grub/time.h> ++#include <grub/usb.h> ++ ++#define GRUB_XHCI_PCI_SBRN_REG 0x60 ++#define GRUB_XHCI_ADDR_MEM_MASK (~0xff) ++ ++/* USBLEGSUP bits and related OS OWNED byte offset */ ++enum ++{ ++ GRUB_XHCI_BIOS_OWNED = (1 << 16), ++ GRUB_XHCI_OS_OWNED = (1 << 24) ++}; ++ ++/* PCI iteration function... */ ++static int ++grub_xhci_pci_iter (grub_pci_device_t dev, grub_pci_id_t pciid, ++ void *data __attribute__ ((unused))) ++{ ++ volatile grub_uint32_t *regs; ++ grub_uint32_t base, base_h; ++ grub_uint32_t eecp_offset; ++ grub_uint32_t usblegsup = 0; ++ grub_uint64_t maxtime; ++ grub_uint32_t interf; ++ grub_uint32_t subclass; ++ grub_uint32_t class; ++ grub_uint8_t release; ++ grub_uint32_t class_code; ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: begin\n"); ++ ++ if (pciid == GRUB_CS5536_PCIID) ++ { ++ grub_dprintf ("xhci", "CS5536 not supported\n"); ++ return 0; ++ } ++ else ++ { ++ grub_pci_address_t addr; ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS); ++ class_code = grub_pci_read (addr) >> 8; ++ interf = class_code & 0xFF; ++ subclass = (class_code >> 8) & 0xFF; ++ class = class_code >> 16; ++ ++ /* If this is not an XHCI controller, just return. */ ++ if (class != 0x0c || subclass != 0x03 || interf != 0x30) ++ return 0; ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: class OK\n"); ++ ++ /* Check Serial Bus Release Number */ ++ addr = grub_pci_make_address (dev, GRUB_XHCI_PCI_SBRN_REG); ++ release = grub_pci_read_byte (addr); ++ if (release != 0x30) ++ { ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: Wrong SBRN: %0x\n", ++ release); ++ return 0; ++ } ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: bus rev. num. OK\n"); ++ ++ /* Determine XHCI XHCC registers base address. */ ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0); ++ base = grub_pci_read (addr); ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG1); ++ base_h = grub_pci_read (addr); ++ /* Stop if registers are mapped above 4G - GRUB does not currently ++ * work with registers mapped above 4G */ ++ if (((base & GRUB_PCI_ADDR_MEM_TYPE_MASK) != GRUB_PCI_ADDR_MEM_TYPE_32) ++ && (base_h != 0)) ++ { ++ grub_dprintf ("xhci", ++ "XHCI grub_xhci_pci_iter: registers above 4G are not supported\n"); ++ return 0; ++ } ++ base &= GRUB_PCI_ADDR_MEM_MASK; ++ if (!base) ++ { ++ grub_dprintf ("xhci", ++ "XHCI: XHCI is not mapped\n"); ++ return 0; ++ } ++ ++ /* Set bus master - needed for coreboot, VMware, broken BIOSes etc. */ ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND); ++ grub_pci_write_word(addr, ++ GRUB_PCI_COMMAND_MEM_ENABLED ++ | GRUB_PCI_COMMAND_BUS_MASTER ++ | grub_pci_read_word(addr)); ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: 32-bit XHCI OK\n"); ++ } ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: iobase of XHCC: %08x\n", ++ (base & GRUB_XHCI_ADDR_MEM_MASK)); ++ ++ regs = grub_pci_device_map_range (dev, ++ (base & GRUB_XHCI_ADDR_MEM_MASK), ++ 0x100); ++ ++ /* Is there EECP ? */ ++ eecp_offset = (grub_le_to_cpu32 (regs[2]) >> 8) & 0xff; ++ ++ /* Determine and change ownership. */ ++ /* EECP offset valid in HCCPARAMS */ ++ /* Ownership can be changed via EECP only */ ++ if (pciid != GRUB_CS5536_PCIID && eecp_offset >= 0x40) ++ { ++ grub_pci_address_t pciaddr_eecp; ++ pciaddr_eecp = grub_pci_make_address (dev, eecp_offset); ++ ++ usblegsup = grub_pci_read (pciaddr_eecp); ++ if (usblegsup & GRUB_XHCI_BIOS_OWNED) ++ { ++ grub_boot_time ("Taking ownership of XHCI controller"); ++ grub_dprintf ("xhci", ++ "XHCI grub_xhci_pci_iter: XHCI owned by: BIOS\n"); ++ /* Ownership change - set OS_OWNED bit */ ++ grub_pci_write (pciaddr_eecp, usblegsup | GRUB_XHCI_OS_OWNED); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ ++ /* Wait for finish of ownership change, XHCI specification ++ * doesn't say how long it can take... */ ++ maxtime = grub_get_time_ms () + 1000; ++ while ((grub_pci_read (pciaddr_eecp) & GRUB_XHCI_BIOS_OWNED) ++ && (grub_get_time_ms () < maxtime)); ++ if (grub_pci_read (pciaddr_eecp) & GRUB_XHCI_BIOS_OWNED) ++ { ++ grub_dprintf ("xhci", ++ "XHCI grub_xhci_pci_iter: XHCI change ownership timeout"); ++ /* Change ownership in "hard way" - reset BIOS ownership */ ++ grub_pci_write (pciaddr_eecp, GRUB_XHCI_OS_OWNED); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ } ++ } ++ else if (usblegsup & GRUB_XHCI_OS_OWNED) ++ /* XXX: What to do in this case - nothing ? Can it happen ? */ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: XHCI owned by: OS\n"); ++ else ++ { ++ grub_dprintf ("xhci", ++ "XHCI grub_Xhci_pci_iter: XHCI owned by: NONE\n"); ++ /* XXX: What to do in this case ? Can it happen ? ++ * Is code below correct ? */ ++ /* Ownership change - set OS_OWNED bit */ ++ grub_pci_write (pciaddr_eecp, GRUB_XHCI_OS_OWNED); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ } ++ ++ /* Disable SMI, just to be sure. */ ++ pciaddr_eecp = grub_pci_make_address (dev, eecp_offset + 4); ++ grub_pci_write (pciaddr_eecp, 0); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ } ++ ++ grub_dprintf ("xhci", "inithw: XHCI grub_xhci_pci_iter: ownership OK\n"); ++ ++ grub_xhci_init_device (regs); ++ return 0; ++} ++ ++void ++grub_xhci_pci_scan (void) ++{ ++ grub_pci_iterate (grub_xhci_pci_iter, NULL); ++} +diff --git a/grub-core/bus/usb/xhci.c b/grub-core/bus/usb/xhci.c +new file mode 100644 +index 000000000..f4591ffb5 +--- /dev/null ++++ b/grub-core/bus/usb/xhci.c +@@ -0,0 +1,2496 @@ ++/* xhci.c - XHCI Support. */ ++/* ++ * GRUB -- GRand Unified Bootloader ++ * Copyright (C) 2020 9elements Cyber Security ++ * ++ * GRUB is free software: you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation, either version 3 of the License, or ++ * (at your option) any later version. ++ * ++ * GRUB is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with GRUB. If not, see <http://www.gnu.org/licenses/>. ++ * ++ * Big parts of this software are inspired by seabios XHCI implementation ++ * Released under LGPLv3. Credits to: ++ * ++ * Copyright (C) 2013 Gerd Hoffmann <kraxel@redhat.com> ++ * Copyright (C) 2014 Kevin O'Connor <kevin@koconnor.net> ++ */ ++ ++#include <grub/dl.h> ++#include <grub/err.h> ++#include <grub/mm.h> ++#include <grub/usb.h> ++#include <grub/usbtrans.h> ++#include <grub/misc.h> ++#include <grub/time.h> ++#include <grub/loader.h> ++#include <grub/disk.h> ++#include <grub/dma.h> ++#include <grub/cache.h> ++#include <grub/i386/cpuid.h> ++ ++GRUB_MOD_LICENSE ("GPLv3+"); ++ ++/* This simple GRUB implementation of XHCI driver */ ++/* Based on the specification ++ * "eXtensible Host Controller Interface for Universal Serial Bus" Revision 1.2 ++ */ ++ ++ ++#define xhci_get_field(data, field) \ ++ (((data) >> field##_SHIFT) & field##_MASK) ++#define XHCI_PORTSC_PLS_MASK 0xf ++#define XHCI_PORTSC_PLS_SHIFT 5 ++#define XHCI_PORTSC_SPEED_MASK 0xf ++#define XHCI_PORTSC_SPEED_SHIFT 10 ++ ++enum ++{ ++ XHCI_USB_FULLSPEED = 1, ++ XHCI_USB_LOWSPEED, ++ XHCI_USB_HIGHSPEED, ++ XHCI_USB_SUPERSPEED ++}; ++ ++/* Chapter 5.3 Host Controller Capability Registers */ ++struct grub_xhci_caps { ++ grub_uint8_t caplength; ++ grub_uint8_t reserved_01; ++ grub_uint16_t hciversion; ++ grub_uint32_t hcsparams1; ++ grub_uint32_t hcsparams2; ++ grub_uint32_t hcsparams3; ++ grub_uint32_t hccparams; ++ grub_uint32_t dboff; ++ grub_uint32_t rtsoff; ++ grub_uint32_t hccparams2; ++} GRUB_PACKED; ++ ++/* extended capabilities */ ++struct grub_xhci_xcap { ++ grub_uint32_t cap; ++ grub_uint32_t data[]; ++} GRUB_PACKED; ++ ++#define XHCI_CAP_LEGACY_SUPPORT 1 ++#define XHCI_CAP_SUPPORTED_PROTOCOL 2 ++ ++struct xhci_portmap { ++ grub_uint8_t start; ++ grub_uint8_t count; ++} GRUB_PACKED; ++ ++struct grub_xhci_op { ++ grub_uint32_t usbcmd; ++ grub_uint32_t usbsts; ++ grub_uint32_t pagesize; ++ grub_uint32_t reserved_01[2]; ++ grub_uint32_t dnctl; ++ grub_uint32_t crcr_low; ++ grub_uint32_t crcr_high; ++ grub_uint32_t reserved_02[4]; ++ grub_uint32_t dcbaap_low; ++ grub_uint32_t dcbaap_high; ++ grub_uint32_t config; ++} GRUB_PACKED; ++ ++enum ++{ ++ GRUB_XHCI_CMD_RS = (1<<0), ++ GRUB_XHCI_CMD_HCRST = (1<<1), ++ GRUB_XHCI_CMD_INTE = (1<<2), ++ GRUB_XHCI_CMD_HSEE = (1<<3), ++ GRUB_XHCI_CMD_LHCRST = (1<<7), ++ GRUB_XHCI_CMD_CSS = (1<<8), ++ GRUB_XHCI_CMD_CRS = (1<<9), ++ GRUB_XHCI_CMD_EWE = (1<<10), ++ GRUB_XHCI_CMD_EU3S = (1<<11) ++}; ++ ++enum ++{ ++ GRUB_XHCI_STS_HCH = (1<<0), ++ GRUB_XHCI_STS_HSE = (1<<2), ++ GRUB_XHCI_STS_EINT = (1<<3), ++ GRUB_XHCI_STS_PCD = (1<<4), ++ GRUB_XHCI_STS_SSS = (1<<8), ++ GRUB_XHCI_STS_RSS = (1<<9), ++ GRUB_XHCI_STS_SRE = (1<<10), ++ GRUB_XHCI_STS_CNR = (1<<11), ++ GRUB_XHCI_STS_HCE = (1<<12) ++}; ++ ++ ++/* Port Registers Offset */ ++#define GRUB_XHCI_PR_OFFSET 0x400 ++/* Interrupter Registers Offset */ ++#define GRUB_XHCI_IR_OFFSET 0x20 ++ ++/* Port Status and Control registers offsets */ ++ ++/* Chapter 6 Data Structures */ ++#define ALIGN_SPBA 64 ++#define ALIGN_DCBAA 64 ++#define ALIGN_CMD_RING_SEG 64 ++#define ALIGN_EVT_RING_SEG 64 ++#define ALIGN_EVT_RING_TABLE 64 ++#define ALIGN_TRB 16 ++#define ALIGN_INCTX 64 ++#define ALIGN_SLOTCTX 32 ++ ++#define BOUNDARY_RING 0x10000 ++ ++enum ++{ ++ GRUB_XHCI_PORTSC_CCS = (1<<0), ++ GRUB_XHCI_PORTSC_PED = (1<<1), ++ GRUB_XHCI_PORTSC_OCA = (1<<3), ++ GRUB_XHCI_PORTSC_PR = (1<<4), ++ GRUB_XHCI_PORTSC_PP = (1<<9), ++ GRUB_XHCI_PORTSC_SPEED_FULL = (1<<10), ++ GRUB_XHCI_PORTSC_SPEED_LOW = (2<<10), ++ GRUB_XHCI_PORTSC_SPEED_HIGH = (3<<10), ++ GRUB_XHCI_PORTSC_SPEED_SUPER = (4<<10), ++ GRUB_XHCI_PORTSC_LWS = (1<<16), ++ GRUB_XHCI_PORTSC_CSC = (1<<17), ++ GRUB_XHCI_PORTSC_PEC = (1<<18), ++ GRUB_XHCI_PORTSC_WRC = (1<<19), ++ GRUB_XHCI_PORTSC_OCC = (1<<20), ++ GRUB_XHCI_PORTSC_PRC = (1<<21), ++ GRUB_XHCI_PORTSC_PLC = (1<<22), ++ GRUB_XHCI_PORTSC_CEC = (1<<23), ++ GRUB_XHCI_PORTSC_CAS = (1<<24), ++ GRUB_XHCI_PORTSC_WCE = (1<<25), ++ GRUB_XHCI_PORTSC_WDE = (1<<26), ++ GRUB_XHCI_PORTSC_WOE = (1<<27), ++ GRUB_XHCI_PORTSC_DR = (1<<30), ++ GRUB_XHCI_PORTSC_WPR = (1<<31) ++}; ++ ++/* XHCI memory data structs */ ++#define GRUB_XHCI_MAX_ENDPOINTS 32 ++ ++#define GRUB_XHCI_RING_ITEMS 128 ++#define GRUB_XHCI_RING_SIZE (GRUB_XHCI_RING_ITEMS*sizeof(struct grub_xhci_trb)) ++/* ++ * xhci_ring structs are allocated with XHCI_RING_SIZE alignment, ++ * then we can get it from a trb pointer (provided by evt ring). ++ */ ++#define XHCI_RING(_trb) \ ++ ((struct grub_xhci_ring*)((grub_uint32_t)(_trb) & ~(GRUB_XHCI_RING_SIZE-1))) ++ ++/* slot context */ ++struct grub_xhci_slotctx { ++ grub_uint32_t ctx[4]; ++ grub_uint32_t reserved_01[4]; ++} GRUB_PACKED; ++ ++/* endpoint context */ ++struct grub_xhci_epctx { ++ grub_uint32_t ctx[2]; ++ grub_uint32_t deq_low; ++ grub_uint32_t deq_high; ++ grub_uint32_t length; ++ grub_uint32_t reserved_01[3]; ++} GRUB_PACKED; ++ ++/* device context array element */ ++struct grub_xhci_devlist { ++ grub_uint32_t ptr_low; ++ grub_uint32_t ptr_high; ++} GRUB_PACKED; ++ ++/* input context */ ++struct grub_xhci_inctx { ++ grub_uint32_t del; ++ grub_uint32_t add; ++ grub_uint32_t reserved_01[6]; ++} GRUB_PACKED; ++ ++/* transfer block (ring element) */ ++struct grub_xhci_trb { ++ grub_uint32_t ptr_low; ++ grub_uint32_t ptr_high; ++ grub_uint32_t status; ++ grub_uint32_t control; ++} GRUB_PACKED; ++ ++#define TRB_C (1<<0) ++#define TRB_TYPE_SHIFT 10 ++#define TRB_TYPE_MASK 0x3f ++#define TRB_TYPE(t) (((t) >> TRB_TYPE_SHIFT) & TRB_TYPE_MASK) ++ ++#define TRB_EV_ED (1<<2) ++ ++#define TRB_TR_ENT (1<<1) ++#define TRB_TR_ISP (1<<2) ++#define TRB_TR_NS (1<<3) ++#define TRB_TR_CH (1<<4) ++#define TRB_TR_IOC (1<<5) ++#define TRB_TR_IDT (1<<6) ++#define TRB_TR_TBC_SHIFT 7 ++#define TRB_TR_TBC_MASK 0x3 ++#define TRB_TR_BEI (1<<9) ++#define TRB_TR_TLBPC_SHIFT 16 ++#define TRB_TR_TLBPC_MASK 0xf ++#define TRB_TR_FRAMEID_SHIFT 20 ++#define TRB_TR_FRAMEID_MASK 0x7ff ++#define TRB_TR_SIA (1<<31) ++ ++#define TRB_TR_DIR (1<<16) ++ ++#define TRB_CR_SLOTID_SHIFT 24 ++#define TRB_CR_SLOTID_MASK 0xff ++#define TRB_CR_EPID_SHIFT 16 ++#define TRB_CR_EPID_MASK 0x1f ++ ++#define TRB_CR_BSR (1<<9) ++#define TRB_CR_DC (1<<9) ++ ++#define TRB_LK_TC (1<<1) ++ ++#define TRB_INTR_SHIFT 22 ++#define TRB_INTR_MASK 0x3ff ++#define TRB_INTR(t) (((t).status >> TRB_INTR_SHIFT) & TRB_INTR_MASK) ++ ++typedef enum TRBType { ++ TRB_RESERVED = 0, ++ TR_NORMAL, ++ TR_SETUP, ++ TR_DATA, ++ TR_STATUS, ++ TR_ISOCH, ++ TR_LINK, ++ TR_EVDATA, ++ TR_NOOP, ++ CR_ENABLE_SLOT, ++ CR_DISABLE_SLOT, ++ CR_ADDRESS_DEVICE, ++ CR_CONFIGURE_ENDPOINT, ++ CR_EVALUATE_CONTEXT, ++ CR_RESET_ENDPOINT, ++ CR_STOP_ENDPOINT, ++ CR_SET_TR_DEQUEUE, ++ CR_RESET_DEVICE, ++ CR_FORCE_EVENT, ++ CR_NEGOTIATE_BW, ++ CR_SET_LATENCY_TOLERANCE, ++ CR_GET_PORT_BANDWIDTH, ++ CR_FORCE_HEADER, ++ CR_NOOP, ++ ER_TRANSFER = 32, ++ ER_COMMAND_COMPLETE, ++ ER_PORT_STATUS_CHANGE, ++ ER_BANDWIDTH_REQUEST, ++ ER_DOORBELL, ++ ER_HOST_CONTROLLER, ++ ER_DEVICE_NOTIFICATION, ++ ER_MFINDEX_WRAP, ++} TRBType; ++ ++typedef enum TRBCCode { ++ CC_INVALID = 0, ++ CC_SUCCESS, ++ CC_DATA_BUFFER_ERROR, ++ CC_BABBLE_DETECTED, ++ CC_USB_TRANSACTION_ERROR, ++ CC_TRB_ERROR, ++ CC_STALL_ERROR, ++ CC_RESOURCE_ERROR, ++ CC_BANDWIDTH_ERROR, ++ CC_NO_SLOTS_ERROR, ++ CC_INVALID_STREAM_TYPE_ERROR, ++ CC_SLOT_NOT_ENABLED_ERROR, ++ CC_EP_NOT_ENABLED_ERROR, ++ CC_SHORT_PACKET, ++ CC_RING_UNDERRUN, ++ CC_RING_OVERRUN, ++ CC_VF_ER_FULL, ++ CC_PARAMETER_ERROR, ++ CC_BANDWIDTH_OVERRUN, ++ CC_CONTEXT_STATE_ERROR, ++ CC_NO_PING_RESPONSE_ERROR, ++ CC_EVENT_RING_FULL_ERROR, ++ CC_INCOMPATIBLE_DEVICE_ERROR, ++ CC_MISSED_SERVICE_ERROR, ++ CC_COMMAND_RING_STOPPED, ++ CC_COMMAND_ABORTED, ++ CC_STOPPED, ++ CC_STOPPED_LENGTH_INVALID, ++ CC_MAX_EXIT_LATENCY_TOO_LARGE_ERROR = 29, ++ CC_ISOCH_BUFFER_OVERRUN = 31, ++ CC_EVENT_LOST_ERROR, ++ CC_UNDEFINED_ERROR, ++ CC_INVALID_STREAM_ID_ERROR, ++ CC_SECONDARY_BANDWIDTH_ERROR, ++ CC_SPLIT_TRANSACTION_ERROR ++} TRBCCode; ++ ++enum { ++ PLS_U0 = 0, ++ PLS_U1 = 1, ++ PLS_U2 = 2, ++ PLS_U3 = 3, ++ PLS_DISABLED = 4, ++ PLS_RX_DETECT = 5, ++ PLS_INACTIVE = 6, ++ PLS_POLLING = 7, ++ PLS_RECOVERY = 8, ++ PLS_HOT_RESET = 9, ++ PLS_COMPILANCE_MODE = 10, ++ PLS_TEST_MODE = 11, ++ PLS_RESUME = 15, ++}; ++ ++/* event ring segment */ ++struct grub_xhci_er_seg { ++ grub_uint32_t ptr_low; ++ grub_uint32_t ptr_high; ++ grub_uint32_t size; ++ grub_uint32_t reserved_01; ++} GRUB_PACKED; ++ ++struct grub_xhci_ring { ++ struct grub_xhci_trb ring[GRUB_XHCI_RING_ITEMS]; ++ struct grub_xhci_trb evt; ++ grub_uint32_t eidx; ++ grub_uint32_t nidx; ++ grub_uint32_t cs; ++}; ++ ++/* port registers */ ++struct grub_xhci_pr { ++ grub_uint32_t portsc; ++ grub_uint32_t portpmsc; ++ grub_uint32_t portli; ++ grub_uint32_t reserved_01; ++} GRUB_PACKED; ++ ++/* doorbell registers */ ++struct grub_xhci_db { ++ grub_uint32_t doorbell; ++} GRUB_PACKED; ++ ++/* runtime registers */ ++struct grub_xhci_rts { ++ grub_uint32_t mfindex; ++} GRUB_PACKED; ++ ++/* interrupter registers */ ++struct grub_xhci_ir { ++ grub_uint32_t iman; ++ grub_uint32_t imod; ++ grub_uint32_t erstsz; ++ grub_uint32_t reserved_01; ++ grub_uint32_t erstba_low; ++ grub_uint32_t erstba_high; ++ grub_uint32_t erdp_low; ++ grub_uint32_t erdp_high; ++} GRUB_PACKED; ++ ++struct grub_xhci_psid { ++ grub_uint8_t id; ++ grub_uint8_t psie; ++ grub_uint16_t psim; ++ grub_uint64_t bitrate; ++ grub_usb_speed_t grub_usb_speed; ++}; ++ ++struct grub_xhci_psids { ++ grub_uint8_t major; ++ grub_uint8_t minor; ++ struct grub_xhci_psid psids[16]; ++}; ++ ++struct grub_xhci ++{ ++ grub_uint8_t shutdown; /* 1 if preparing shutdown of controller */ ++ /* xhci registers */ ++ volatile struct grub_xhci_caps *caps; /* Capability registers */ ++ volatile struct grub_xhci_op *op; /* Operational registers */ ++ volatile struct grub_xhci_pr *pr; /* Port Registers */ ++ volatile struct grub_xhci_db *db; /* doorbell */ ++ volatile struct grub_xhci_ir *ir; /* Interrupt Registers */ ++ /* devinfo */ ++ grub_uint32_t xcap; ++ grub_uint32_t ports; ++ grub_uint32_t slots; ++ grub_uint8_t flag64; ++ grub_uint16_t spb; ++ grub_uint32_t pagesize; ++ struct xhci_portmap usb2; ++ struct xhci_portmap usb3; ++ struct grub_xhci_psids *psids; ++ /* xhci data structures */ ++ struct grub_pci_dma_chunk *devs_dma; ++ volatile struct grub_xhci_devlist *devs; ++ struct grub_pci_dma_chunk *cmds_dma; ++ volatile struct grub_xhci_ring *cmds; ++ struct grub_pci_dma_chunk *evts_dma; ++ volatile struct grub_xhci_ring *evts; ++ struct grub_pci_dma_chunk *eseg_dma; ++ volatile struct grub_xhci_er_seg *eseg; ++ struct grub_pci_dma_chunk *spba_dma; ++ struct grub_pci_dma_chunk *spad_dma; ++ ++ struct grub_xhci *next; ++}; ++ ++struct grub_xhci_priv { ++ grub_uint8_t slotid; ++ grub_uint32_t max_packet; ++ struct grub_pci_dma_chunk *enpoint_trbs_dma[32]; ++ volatile struct grub_xhci_ring *enpoint_trbs[32]; ++ struct grub_pci_dma_chunk *slotctx_dma; ++}; ++ ++struct grub_xhci_port { ++ grub_uint32_t portsc; ++ grub_uint32_t portpmsc; ++ grub_uint32_t portli; ++ grub_uint32_t reserved_01; ++}; ++ ++struct grub_xhci_transfer_controller_data { ++ grub_uint32_t transfer_size; ++}; ++ ++static struct grub_xhci *xhci; ++ ++/**************************************************************** ++ * general access functions ++ ****************************************************************/ ++ ++static inline void ++grub_xhci_write32(volatile void *addr, grub_uint32_t val) { ++ *(volatile grub_uint32_t *)addr = val; ++} ++static inline void ++grub_xhci_write16(volatile void *addr, grub_uint16_t val) { ++ *(volatile grub_uint16_t *)addr = val; ++} ++static inline void ++grub_xhci_write8(void *addr, grub_uint8_t val) { ++ *(volatile grub_uint8_t *)addr = val; ++} ++ ++static inline grub_uint32_t ++grub_xhci_read32(volatile void *addr) { ++ return grub_le_to_cpu32 (*((volatile grub_uint32_t *)addr)); ++} ++ ++static inline grub_uint16_t ++grub_xhci_read16(volatile void *addr) { ++ return grub_le_to_cpu16 (*((volatile grub_uint32_t *)addr)); ++} ++static inline grub_uint8_t ++grub_xhci_read8(volatile void *addr) { ++ return (*((volatile grub_uint32_t *)addr)); ++} ++ ++static inline grub_uint32_t ++grub_xhci_port_read (struct grub_xhci *x, grub_uint32_t port) ++{ ++ return grub_xhci_read32(&x->pr[port].portsc); ++} ++ ++static inline void ++grub_xhci_port_write (struct grub_xhci *x, grub_uint32_t port, ++ grub_uint32_t and_mask, grub_uint32_t or_mask) ++{ ++ grub_uint32_t reg = grub_xhci_port_read(x, port); ++ reg &= and_mask; ++ reg |= or_mask; ++ ++ grub_xhci_write32(&x->pr[port].portsc, reg); ++} ++ ++/**************************************************************** ++ * xhci status and support functions ++ ****************************************************************/ ++ ++static grub_uint32_t xhci_get_pagesize(struct grub_xhci *x) ++{ ++ /* Chapter 5.4.3 Page Size Register (PAGESIZE) */ ++ for (grub_uint8_t i = 0; i < 16; i++) ++ { ++ if (grub_xhci_read32(&x->op->pagesize) & (1 << i)) ++ return 1 << (12 + i); ++ } ++ return 0; ++} ++ ++static grub_uint8_t xhci_is_halted(struct grub_xhci *x) ++{ ++ return !!(grub_xhci_read32(&x->op->usbsts) & 1); ++} ++ ++/* Just for debugging */ ++static void xhci_check_status(struct grub_xhci *x) ++{ ++ grub_uint32_t reg; ++ ++ reg = grub_xhci_read32(&x->op->usbsts); ++ if (reg & 1) ++ grub_dprintf("xhci", "%s: xHCI halted\n", __func__); ++ if (reg & 2) ++ grub_dprintf("xhci", "%s: Host system error detected\n", __func__); ++ if (reg & (1 << 12)) ++ grub_dprintf("xhci", "%s: Internal error detected\n", __func__); ++ reg = grub_xhci_read32(&x->op->crcr_low); ++ if (reg & (1 << 3)) ++ grub_dprintf("xhci", "%s: Command ring running\n", __func__); ++} ++ ++/* xhci_memalign_dma32 allocates DMA memory satisfying alignment and boundary ++ * requirements without wasting to much memory */ ++static struct grub_pci_dma_chunk * ++xhci_memalign_dma32(grub_size_t align, ++ grub_size_t size, ++ grub_size_t boundary) ++{ ++ struct grub_pci_dma_chunk *tmp; ++ const grub_uint32_t mask = boundary - 1; ++ grub_uint32_t start, end; ++ ++ /* Allocate some memory and check if it doesn't cross boundary */ ++ tmp = grub_memalign_dma32(align, size); ++ start = grub_dma_get_phys(tmp); ++ end = start + size - 1; ++ if ((start & mask) == (end & mask)) ++ return tmp; ++ /* Buffer isn't usable, allocate bigger one */ ++ grub_dma_free(tmp); ++ ++ return grub_memalign_dma32(boundary, size); ++} ++ ++/**************************************************************** ++ * helper functions for in context DMA buffer ++ ****************************************************************/ ++ ++static int ++grub_xhci_inctx_size(struct grub_xhci *x) ++{ ++ const grub_uint8_t cnt = GRUB_XHCI_MAX_ENDPOINTS + 1; ++ return (sizeof(struct grub_xhci_inctx) * cnt) << x->flag64; ++} ++ ++static void ++grub_xhci_inctx_sync_dma_caches(struct grub_xhci *x, struct grub_pci_dma_chunk *inctx) ++{ ++ grub_arch_sync_dma_caches(inctx, grub_xhci_inctx_size(x)); ++} ++ ++static struct grub_pci_dma_chunk * ++grub_xhci_alloc_inctx(struct grub_xhci *x, int maxepid, ++ struct grub_usb_device *dev) ++{ ++ int size = grub_xhci_inctx_size(x); ++ struct grub_pci_dma_chunk *dma = xhci_memalign_dma32(ALIGN_INCTX, size, ++ x->pagesize); ++ if (!dma) ++ return NULL; ++ ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(dma); ++ grub_memset((void *)in, 0, size); ++ ++ struct grub_xhci_slotctx *slot = (void*)&in[1 << x->flag64]; ++ slot->ctx[0] |= maxepid << 27; /* context entries */ ++ grub_dprintf("xhci", "%s: speed=%d root_port=%d\n", __func__, dev->speed, dev->root_port); ++ switch (dev->speed) { ++ case GRUB_USB_SPEED_FULL: ++ slot->ctx[0] |= XHCI_USB_FULLSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_HIGH: ++ slot->ctx[0] |= XHCI_USB_HIGHSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_LOW: ++ slot->ctx[0] |= XHCI_USB_LOWSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_SUPER: ++ slot->ctx[0] |= XHCI_USB_SUPERSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_NONE: ++ slot->ctx[0] |= 0 << 20; ++ break; ++ } ++ ++ /* Route is greater zero on devices that are connected to a non root hub */ ++ if (dev->route) ++ { ++ /* FIXME: Implement this code for non SuperSpeed hub devices */ ++ } ++ slot->ctx[0] |= dev->route; ++ slot->ctx[1] |= (dev->root_port+1) << 16; ++ ++ grub_arch_sync_dma_caches(in, size); ++ ++ return dma; ++} ++ ++/**************************************************************** ++ * xHCI event processing ++ ****************************************************************/ ++ ++/* Dequeue events on the XHCI event ring generated by the hardware */ ++static void xhci_process_events(struct grub_xhci *x) ++{ ++ volatile struct grub_xhci_ring *evts = x->evts; ++ /* XXX invalidate caches */ ++ ++ for (;;) { ++ /* check for event */ ++ grub_uint32_t nidx = grub_xhci_read32(&evts->nidx); ++ grub_uint32_t cs = grub_xhci_read32(&evts->cs); ++ volatile struct grub_xhci_trb *etrb = evts->ring + nidx; ++ grub_uint32_t control = grub_xhci_read32(&etrb->control); ++ if ((control & TRB_C) != (cs ? 1 : 0)) ++ return; ++ ++ /* process event */ ++ grub_uint32_t evt_type = TRB_TYPE(control); ++ grub_uint32_t evt_cc = (grub_xhci_read32(&etrb->status) >> 24) & 0xff; ++ ++ switch (evt_type) ++ { ++ case ER_TRANSFER: ++ case ER_COMMAND_COMPLETE: ++ { ++ struct grub_xhci_trb *rtrb = (void*)grub_xhci_read32(&etrb->ptr_low); ++ struct grub_xhci_ring *ring = XHCI_RING(rtrb); ++ volatile struct grub_xhci_trb *evt = &ring->evt; ++ grub_uint32_t eidx = rtrb - ring->ring + 1; ++ grub_dprintf("xhci", "%s: ring %p [trb %p, evt %p, type %d, eidx %d, cc %d]\n", ++ __func__, ring, rtrb, evt, evt_type, eidx, evt_cc); ++ *evt = *etrb; ++ grub_xhci_write32(&ring->eidx, eidx); ++ break; ++ } ++ case ER_PORT_STATUS_CHANGE: ++ { ++ /* Nothing to do here. grub_xhci_detect_dev will handle it */ ++ break; ++ } ++ default: ++ { ++ grub_dprintf("xhci", "%s: unknown event, type %d, cc %d\n", ++ __func__, evt_type, evt_cc); ++ break; ++ } ++ } ++ ++ /* move ring index, notify xhci */ ++ nidx++; ++ if (nidx == GRUB_XHCI_RING_ITEMS) ++ { ++ nidx = 0; ++ cs = cs ? 0 : 1; ++ grub_xhci_write32(&evts->cs, cs); ++ } ++ grub_xhci_write32(&evts->nidx, nidx); ++ volatile struct grub_xhci_ir *ir = x->ir; ++ grub_uint32_t erdp = (grub_uint32_t)(evts->ring + nidx); ++ grub_xhci_write32(&ir->erdp_low, erdp); ++ grub_xhci_write32(&ir->erdp_high, 0); ++ } ++} ++ ++/**************************************************************** ++ * TRB handling ++ ****************************************************************/ ++ ++/* Signal the hardware to process events on a TRB ring */ ++static void xhci_doorbell(struct grub_xhci *x, grub_uint32_t slotid, grub_uint32_t value) ++{ ++ xhci_check_status(x); ++ grub_dprintf("xhci", "%s: slotid %d, epid %d\n", __func__, slotid, value); ++ grub_xhci_write32(&x->db[slotid].doorbell, value); ++} ++ ++/* Check if a ring has any pending TRBs */ ++static int xhci_ring_busy(volatile struct grub_xhci_ring *ring) ++{ ++ grub_uint32_t eidx = grub_xhci_read32(&ring->eidx); ++ grub_uint32_t nidx = grub_xhci_read32(&ring->nidx); ++ ++ return (eidx != nidx); ++} ++ ++/* Returns free space in ring */ ++static int xhci_ring_free_space(volatile struct grub_xhci_ring *ring) ++{ ++ grub_uint32_t eidx = grub_xhci_read32(&ring->eidx); ++ grub_uint32_t nidx = grub_xhci_read32(&ring->nidx); ++ ++ /* nidx is never 0, so reduce ring buffer size by one */ ++ return (eidx > nidx) ? eidx-nidx ++ : (ARRAY_SIZE(ring->ring) - 1) - nidx + eidx; ++} ++ ++/* Check if a ring is full */ ++static int xhci_ring_full(volatile struct grub_xhci_ring *ring) ++{ ++ /* Might need to insert one link TRB */ ++ return xhci_ring_free_space(ring) <= 1; ++} ++ ++/* Check if a ring is almost full */ ++static int xhci_ring_almost_full(volatile struct grub_xhci_ring *ring) ++{ ++ /* Might need to insert one link TRB */ ++ return xhci_ring_free_space(ring) <= 2; ++} ++ ++/* Wait for a ring to empty (all TRBs processed by hardware) */ ++static int xhci_event_wait(struct grub_xhci *x, ++ volatile struct grub_xhci_ring *ring, ++ grub_uint32_t timeout) ++{ ++ grub_uint32_t end = grub_get_time_ms () + timeout; ++ ++ for (;;) ++ { ++ xhci_check_status(x); ++ xhci_process_events(x); ++ if (!xhci_ring_busy(ring)) ++ { ++ grub_uint32_t status = ring->evt.status; ++ return (status >> 24) & 0xff; ++ } ++ if (grub_get_time_ms () > end) ++ { ++ xhci_check_status(x); ++ grub_dprintf("xhci", "%s: Timeout waiting for event\n", __func__); ++ return -1; ++ } ++ } ++} ++ ++/* Add a TRB to the given ring, either regular or inline */ ++static void xhci_trb_fill(volatile struct grub_xhci_ring *ring, ++ grub_uint64_t ptr, grub_uint32_t xferlen, ++ grub_uint32_t flags) ++{ ++ volatile struct grub_xhci_trb *dst = &ring->ring[ring->nidx]; ++ dst->ptr_low = ptr & 0xffffffff; ++ dst->ptr_high = ptr >> 32; ++ dst->status = xferlen; ++ dst->control = flags | (ring->cs ? TRB_C : 0); ++ ++ grub_arch_sync_dma_caches(dst, sizeof(ring->ring[0])); ++} ++ ++/* ++ * Queue a TRB onto a ring. ++ * ++ * The caller must pass a pointer to the data in physical address-space or the ++ * data itself (but no more than 8 bytes) in data_or_addr. Inline data must have ++ * the flag TRB_TR_IDT set. ++ */ ++static void xhci_trb_queue(volatile struct grub_xhci_ring *ring, ++ grub_uint64_t data_or_addr, ++ grub_uint32_t xferlen, grub_uint32_t flags) ++{ ++ grub_dprintf("xhci", "%s: ring %p data %llx len %d flags 0x%x remain 0x%x\n", __func__, ++ ring, data_or_addr, xferlen & 0x1ffff, flags, xferlen >> 17); ++ ++ if (xhci_ring_full(ring)) ++ { ++ grub_dprintf("xhci", "%s: ERROR: ring %p is full, discarding TRB\n", ++ __func__, ring); ++ return; ++ } ++ ++ if (ring->nidx >= ARRAY_SIZE(ring->ring) - 1) ++ { ++ /* Reset to command buffer pointer to the first element */ ++ xhci_trb_fill(ring, (grub_addr_t)ring->ring, 0, (TR_LINK << 10) | TRB_LK_TC); ++ ring->nidx = 0; ++ ring->cs ^= 1; ++ grub_dprintf("xhci", "%s: ring %p [linked]\n", __func__, ring); ++ } ++ ++ xhci_trb_fill(ring, data_or_addr, xferlen, flags); ++ ring->nidx++; ++ grub_dprintf("xhci", "%s: ring %p [nidx %d, len %d]\n", ++ __func__, ring, ring->nidx, xferlen); ++} ++ ++/* ++ * Queue a TRB onto a ring and flush it if necessary. ++ * ++ * The caller must pass a pointer to the data in physical address-space or the ++ * data itself (but no more than 8 bytes) in data_or_addr. Inline data must have ++ * the flag TRB_TR_IDT set. ++ */ ++static int xhci_trb_queue_and_flush(struct grub_xhci *x, ++ grub_uint32_t slotid, ++ grub_uint32_t epid, ++ volatile struct grub_xhci_ring *ring, ++ grub_uint64_t data_or_addr, ++ grub_uint32_t xferlen, grub_uint32_t flags) ++{ ++ grub_uint8_t submit = 0; ++ if (xhci_ring_almost_full(ring)) ++ { ++ grub_dprintf("xhci", "%s: almost full e %d n %d\n", __func__, ring->eidx, ring->nidx); ++ flags |= TRB_TR_IOC; ++ submit = 1; ++ } ++ /* Note: xhci_trb_queue might queue on or two elements, if the end of the TRB ++ * has been reached. The caller must account for that when filling the TRB. */ ++ xhci_trb_queue(ring, data_or_addr, xferlen, flags); ++ /* Submit if less no free slot is remaining, we might need an additional ++ * one on the next call to this function. */ ++ if (submit) ++ { ++ xhci_doorbell(x, slotid, epid); ++ int rc = xhci_event_wait(x, ring, 1000); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ return rc; ++ } ++ return 0; ++} ++ ++/**************************************************************** ++ * xHCI command functions ++ ****************************************************************/ ++ ++/* Submit a command to the xHCI command TRB */ ++static int xhci_cmd_submit(struct grub_xhci *x, ++ struct grub_pci_dma_chunk *inctx_dma, ++ grub_uint32_t flags) ++{ ++ volatile struct grub_xhci_inctx *inctx; ++ /* Don't submit if halted, it will fail */ ++ if (xhci_is_halted(x)) ++ return -1; ++ ++ if (inctx_dma) ++ { ++ grub_xhci_inctx_sync_dma_caches(x, inctx_dma); ++ ++ inctx = grub_dma_get_virt(inctx_dma); ++ ++ struct grub_xhci_slotctx *slot = (void*)&inctx[1 << x->flag64]; ++ grub_uint32_t port = ((slot->ctx[1] >> 16) & 0xff) - 1; ++ grub_uint32_t portsc = grub_xhci_port_read(x, port); ++ if (!(portsc & GRUB_XHCI_PORTSC_CCS)) ++ { ++ grub_dprintf("xhci", "%s: root port %d no longer connected\n", ++ __func__, port); ++ return -1; ++ } ++ xhci_trb_queue(x->cmds, grub_dma_get_phys(inctx_dma), 0, flags); ++ } ++ else ++ { ++ xhci_trb_queue(x->cmds, 0, 0, flags); ++ } ++ ++ xhci_doorbell(x, 0, 0); ++ int rc = xhci_event_wait(x, x->cmds, 1000); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ ++ return rc; ++} ++ ++static int xhci_cmd_enable_slot(struct grub_xhci *x) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_ENABLE_SLOT << 10); ++ ++ grub_dprintf("xhci", "%s:\n", __func__); ++ int cc = xhci_cmd_submit(x, NULL, flags); ++ if (cc != CC_SUCCESS) ++ return -1; ++ grub_dprintf("xhci", "%s: %p\n", __func__, &x->cmds->evt.control); ++ grub_dprintf("xhci", "%s: %x\n", __func__, grub_xhci_read32(&x->cmds->evt.control)); ++ ++ return (grub_xhci_read32(&x->cmds->evt.control) >> 24) & 0xff; ++} ++ ++static int xhci_cmd_disable_slot(struct grub_xhci *x, grub_uint32_t slotid) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_DISABLE_SLOT << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, NULL, flags); ++} ++ ++static int xhci_cmd_stop_endpoint(struct grub_xhci *x, grub_uint32_t slotid ++ , grub_uint32_t epid ++ , grub_uint32_t suspend) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_STOP_ENDPOINT << 10); ++ flags |= (epid << 16); ++ flags |= (suspend << 23) ; ++ flags |= (slotid << 24); ++ ++ return xhci_cmd_submit(x, NULL, flags); ++} ++ ++static int xhci_cmd_reset_endpoint(struct grub_xhci *x, grub_uint32_t slotid ++ , grub_uint32_t epid ++ , grub_uint32_t preserve) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (preserve << 9); ++ flags |= (CR_RESET_ENDPOINT << 10); ++ flags |= (epid << 16); ++ flags |= (slotid << 24); ++ ++ return xhci_cmd_submit(x, NULL, flags); ++} ++ ++static int xhci_cmd_set_dequeue_pointer(struct grub_xhci *x, grub_uint32_t slotid ++ , grub_uint32_t epid ++ , grub_addr_t tr_deque_pointer) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_SET_TR_DEQUEUE << 10); ++ flags |= (epid << 16); ++ flags |= (slotid << 24); ++ ++ xhci_trb_queue(x->cmds, tr_deque_pointer, 0, flags); ++ ++ xhci_doorbell(x, 0, 0); ++ int rc = xhci_event_wait(x, x->cmds, 1000); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ ++ return rc; ++} ++ ++static int xhci_cmd_address_device(struct grub_xhci *x, grub_uint32_t slotid, ++ struct grub_pci_dma_chunk *inctx_dma) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_ADDRESS_DEVICE << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, inctx_dma, flags); ++} ++ ++static int xhci_cmd_configure_endpoint(struct grub_xhci *x, grub_uint32_t slotid, ++ struct grub_pci_dma_chunk *inctx_dma) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_CONFIGURE_ENDPOINT << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, inctx_dma, flags); ++} ++ ++static int xhci_cmd_evaluate_context(struct grub_xhci *x, grub_uint32_t slotid, ++ struct grub_pci_dma_chunk *inctx_dma) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_EVALUATE_CONTEXT << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, inctx_dma, flags); ++} ++ ++/**************************************************************** ++ * xHCI host controller initialization ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_reset (struct grub_xhci *x) ++{ ++ grub_uint32_t reg; ++ grub_uint32_t end; ++ ++ reg = grub_xhci_read32(&x->op->usbcmd); ++ if (reg & GRUB_XHCI_CMD_RS) ++ { ++ reg &= ~GRUB_XHCI_CMD_RS; ++ grub_xhci_write32(&x->op->usbcmd, reg); ++ ++ end = grub_get_time_ms () + 32; ++ while (grub_xhci_read32(&x->op->usbcmd) & GRUB_XHCI_STS_HCH) ++ { ++ if (grub_get_time_ms () > end) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ grub_millisleep(1); ++ } ++ } ++ ++ grub_dprintf("xhci", "grub_xhci_reset: resetting HC\n"); ++ grub_xhci_write32(&x->op->usbcmd, GRUB_XHCI_CMD_HCRST); ++ ++ /* Wait for device to complete reset and be enabled */ ++ end = grub_get_time_ms () + 100; ++ while (grub_xhci_read32(&x->op->usbcmd) & GRUB_XHCI_CMD_HCRST) ++ { ++ if (grub_get_time_ms () > end) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ grub_millisleep(1); ++ } ++ ++ /* Wait for device to complete reset and be enabled */ ++ end = grub_get_time_ms () + 100; ++ while (grub_xhci_read32(&x->op->usbsts) & GRUB_XHCI_STS_CNR) ++ { ++ if (grub_get_time_ms () > end) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ grub_millisleep(1); ++ } ++ ++ grub_xhci_write32(&x->op->config, x->slots); ++ grub_xhci_write32(&x->op->dcbaap_low, grub_dma_get_phys(x->devs_dma)); ++ grub_xhci_write32(&x->op->dcbaap_high, 0); ++ grub_xhci_write32(&x->op->crcr_low, grub_dma_get_phys(x->cmds_dma)| 1); ++ grub_xhci_write32(&x->op->crcr_high, 0); ++ x->cmds->cs = 1; ++ ++ grub_arch_sync_dma_caches(x->cmds, sizeof(*x->cmds)); ++ ++ x->eseg->ptr_low = grub_dma_get_phys(x->evts_dma); ++ x->eseg->ptr_high = 0; ++ x->eseg->size = GRUB_XHCI_RING_ITEMS; ++ ++ grub_arch_sync_dma_caches(x->eseg, sizeof(*x->eseg)); ++ ++ grub_xhci_write32(&x->ir->erstsz, 1); ++ grub_xhci_write32(&x->ir->erdp_low, grub_dma_get_phys(x->evts_dma)); ++ grub_xhci_write32(&x->ir->erdp_high, 0); ++ grub_xhci_write32(&x->ir->erstba_low, grub_dma_get_phys(x->eseg_dma)); ++ grub_xhci_write32(&x->ir->erstba_high, 0); ++ x->evts->cs = 1; ++ ++ grub_arch_sync_dma_caches(x->evts, sizeof(*x->eseg)); ++ ++ xhci_check_status(x); ++ ++ grub_dprintf ("xhci", "XHCI OP COMMAND: %08x\n", ++ grub_xhci_read32 (&x->op->usbcmd)); ++ grub_dprintf ("xhci", "XHCI OP STATUS: %08x\n", ++ grub_xhci_read32 (&x->op->usbsts)); ++ grub_dprintf ("xhci", "XHCI OP PAGESIZE: %08x\n", ++ grub_xhci_read32 (&x->op->pagesize)); ++ grub_dprintf ("xhci", "XHCI OP DNCTRL: %08x\n", ++ grub_xhci_read32 (&x->op->dnctl)); ++ grub_dprintf ("xhci", "XHCI OP CRCR_LOW: %08x\n", ++ grub_xhci_read32 (&x->op->crcr_low)); ++ grub_dprintf ("xhci", "XHCI OP CRCR_HIGH: %08x\n", ++ grub_xhci_read32 (&x->op->crcr_high)); ++ grub_dprintf ("xhci", "XHCI OP DCBAAP_LOW: %08x\n", ++ grub_xhci_read32 (&x->op->dcbaap_low)); ++ grub_dprintf ("xhci", "XHCI OP DCBAAP_HIGH: %08x\n", ++ grub_xhci_read32 (&x->op->dcbaap_high)); ++ grub_dprintf ("xhci", "XHCI OP CONFIG: %08x\n", ++ grub_xhci_read32 (&x->op->config)); ++ grub_dprintf ("xhci", "XHCI IR ERSTSZ: %08x\n", ++ grub_xhci_read32 (&x->ir->erstsz)); ++ grub_dprintf ("xhci", "XHCI IR ERDP: %08x\n", ++ grub_xhci_read32 (&x->ir->erdp_low)); ++ grub_dprintf ("xhci", "XHCI IR ERSTBA: %08x\n", ++ grub_xhci_read32 (&x->ir->erstba_low)); ++ ++ xhci_check_status(x); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static grub_usb_err_t ++grub_xhci_request_legacy_handoff(volatile struct grub_xhci_xcap *xcap) ++{ ++ grub_uint32_t end; ++ ++ end = grub_get_time_ms () + 10; ++ for (;;) ++ { ++ grub_uint32_t cap = grub_xhci_read32(&xcap->cap); ++ if (cap & (1 << 16)) ++ grub_xhci_write32(&xcap->cap, cap | (1 << 24)); ++ else ++ break; ++ ++ if (grub_get_time_ms () > end) ++ { ++ grub_dprintf ("xhci","ERROR: %s TIMEOUT\n", __func__); ++ return GRUB_USB_ERR_TIMEOUT; ++ } ++ grub_millisleep(1); ++ } ++ return GRUB_USB_ERR_NONE; ++} ++ ++static void ++grub_xhci_fill_default_speed_mapping(struct grub_xhci_psids *ids) ++{ ++ /* Chapter 7.2.2.1.1 "Default USB Speed ID Mapping" */ ++ ids->psids[0].id = 1; ++ ids->psids[0].psie = 2; ++ ids->psids[0].psim = 12; ++ ids->psids[1].id = 2; ++ ids->psids[1].psie = 1; ++ ids->psids[1].psim = 1500; ++ ids->psids[2].id = 3; ++ ids->psids[2].psie = 2; ++ ids->psids[2].psim = 480; ++ ids->psids[3].id = 4; ++ ids->psids[3].psie = 3; ++ ids->psids[3].psim = 5; ++ ids->psids[4].id = 5; ++ ids->psids[4].psie = 3; ++ ids->psids[4].psim = 10; ++ ids->psids[5].id = 6; ++ ids->psids[5].psie = 3; ++ ids->psids[5].psim = 10; ++ ids->psids[6].id = 7; ++ ids->psids[6].psie = 3; ++ ids->psids[6].psim = 20; ++} ++ ++static void ++grub_xhci_calc_speed_mapping(struct grub_xhci_psids *ids) ++{ ++ const grub_uint64_t mult[4] = {1ULL, 1000ULL, 1000000ULL, 1000000000ULL}; ++ ++ for (grub_uint8_t i = 0; i < 16; i++) ++ { ++ if (ids->psids[i].id == 0) ++ continue; ++ ids->psids[i].bitrate = mult[ids->psids[i].psie & 3] * (grub_uint64_t)ids->psids[i].psim; ++ if (ids->psids[i].bitrate < 12000000ULL) ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_LOW; ++ else if (ids->psids[i].bitrate < 480000000ULL) ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_FULL; ++ else if (ids->psids[i].bitrate > 1200000000ULL) ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_SUPER; ++ else ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_HIGH; ++ } ++} ++ ++ ++/* PCI iteration function... */ ++void ++grub_xhci_init_device (volatile void *regs) ++{ ++ struct grub_xhci *x; ++ grub_uint32_t hcs1, hcc, reg; ++ ++ /* Allocate memory for the controller and fill basic values. */ ++ x = grub_zalloc (sizeof (*x)); ++ if (!x) ++ { ++ grub_dprintf("xhci", "Failed to allocate memory\n"); ++ return; ++ } ++ x->caps = (volatile struct grub_xhci_caps *) regs; ++ x->op = (volatile struct grub_xhci_op *) (((grub_uint8_t *)regs) + ++ grub_xhci_read8(&x->caps->caplength)); ++ x->pr = (volatile struct grub_xhci_pr *) (((grub_uint8_t *)x->op) + ++ GRUB_XHCI_PR_OFFSET); ++ x->db = (volatile struct grub_xhci_db *) (((grub_uint8_t *)regs) + ++ grub_xhci_read32(&x->caps->dboff)); ++ x->ir = (volatile struct grub_xhci_ir *) (((grub_uint8_t *)regs) + ++ grub_xhci_read32(&x->caps->rtsoff) + GRUB_XHCI_IR_OFFSET); ++ ++ grub_dprintf ("xhci", "XHCI init: CAPLENGTH: 0x%02x\n", ++ grub_xhci_read8 (&x->caps->caplength)); ++ grub_dprintf ("xhci", "XHCI init: HCIVERSION: 0x%04x\n", ++ grub_xhci_read16 (&x->caps->hciversion)); ++ grub_dprintf ("xhci", "XHCI init: HCSPARAMS1: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams1)); ++ grub_dprintf ("xhci", "XHCI init: HCSPARAMS2: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams2)); ++ grub_dprintf ("xhci", "XHCI init: HCSPARAMS3: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams3)); ++ grub_dprintf ("xhci", "XHCI init: HCCPARAMS: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams3)); ++ grub_dprintf ("xhci", "XHCI init: DBOFF: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->dboff)); ++ grub_dprintf ("xhci", "XHCI init: RTOFF: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->rtsoff)); ++ ++ hcs1 = grub_xhci_read32(&x->caps->hcsparams1); ++ hcc = grub_xhci_read32(&x->caps->hccparams); ++ x->ports = (grub_uint32_t) ((hcs1 >> 24) & 0xff); ++ x->slots = (grub_uint32_t) (hcs1 & 0xff); ++ x->xcap = (grub_uint32_t) ((hcc >> 16) & 0xffff) * sizeof(grub_uint32_t); ++ x->flag64 = (grub_uint8_t) ((hcc & 0x04) ? 1 : 0); ++ grub_dprintf("xhci", "XHCI init: %d ports, %d slots, %d byte contexts\n" ++ , x->ports, x->slots, x->flag64 ? 64 : 32); ++ ++ x->psids = grub_zalloc (sizeof (struct grub_xhci_psids) * x->ports); ++ if (x->xcap) ++ { ++ grub_uint32_t off; ++ volatile grub_uint8_t *addr = (grub_uint8_t *) x->caps + x->xcap; ++ do ++ { ++ volatile struct grub_xhci_xcap *xcap = (void *)addr; ++ grub_uint32_t ports, name, cap = grub_xhci_read32(&xcap->cap); ++ switch (cap & 0xff) { ++ case XHCI_CAP_LEGACY_SUPPORT: ++ { ++ if (grub_xhci_request_legacy_handoff(xcap) != GRUB_USB_ERR_NONE) ++ { ++ grub_dprintf("xhci", "XHCI init: Failed to get xHCI ownership\n"); ++ goto fail; ++ } ++ break; ++ } ++ case XHCI_CAP_SUPPORTED_PROTOCOL: ++ { ++ name = grub_xhci_read32(&xcap->data[0]); ++ ports = grub_xhci_read32(&xcap->data[1]); ++ const grub_uint8_t major = (cap >> 24) & 0xff; ++ const grub_uint8_t minor = (cap >> 16) & 0xff; ++ const grub_uint8_t psic = (ports >> 28) & 0xf; ++ const grub_uint8_t count = (ports >> 8) & 0xff; ++ const grub_uint8_t start = (ports >> 0) & 0xff; ++ grub_dprintf("xhci", "XHCI init: protocol %c%c%c%c %x.%02x" ++ ", %d ports (offset %d), def %x, psic %d\n" ++ , (name >> 0) & 0xff ++ , (name >> 8) & 0xff ++ , (name >> 16) & 0xff ++ , (name >> 24) & 0xff ++ , major, minor ++ , count, start ++ , ports >> 16 ++ , psic); ++ if (name == 0x20425355 /* "USB " */) ++ { ++ if (major == 2) ++ { ++ x->usb2.start = start; ++ x->usb2.count = count; ++ } ++ else if (major == 3) ++ { ++ x->usb3.start = start; ++ x->usb3.count = count; ++ } ++ ++ for (grub_uint32_t p = start - 1; p < start + count - 1UL; p++) ++ { ++ x->psids[p].major = major; ++ x->psids[p].minor = minor; ++ grub_xhci_fill_default_speed_mapping(&x->psids[p]); ++ for (grub_uint8_t i = 0; i < psic; i++) ++ { ++ grub_uint32_t psid = grub_xhci_read32(&xcap->data[3 + i]); ++ x->psids[p].psids[i].id = (psid >> 0) & 0xf; ++ x->psids[p].psids[i].psie = (psid >> 4) & 0x3; ++ x->psids[p].psids[i].psim = (psid >> 16) & 0xfffff; ++ } ++ grub_xhci_calc_speed_mapping(&x->psids[p]); ++ } ++ } ++ ++ break; ++ } ++ default: ++ { ++ grub_dprintf("xhci", "XHCI extcap 0x%x @ %p\n", cap & 0xff, addr); ++ break; ++ } ++ } ++ off = (cap >> 8) & 0xff; ++ addr += off << 2; ++ } ++ while (off > 0); ++ } ++ ++ x->pagesize = xhci_get_pagesize(x); ++ grub_dprintf("xhci", "XHCI init: Minimum supported page size 0x%x\n", ++ x->pagesize); ++ ++ /* Chapter 6.1 Device Context Base Address Array */ ++ x->devs_dma = xhci_memalign_dma32(ALIGN_DCBAA, ++ sizeof(*x->devs) * (x->slots + 1), ++ x->pagesize); ++ if (!x->devs_dma) ++ goto fail; ++ x->devs = grub_dma_get_virt(x->devs_dma); ++ grub_memset((void *)x->devs, 0, sizeof(*x->devs) * (x->slots + 1)); ++ grub_arch_sync_dma_caches(x->devs, sizeof(*x->devs) * (x->slots + 1)); ++ grub_dprintf ("xhci", "XHCI init: device memory %p (%x)\n", ++ grub_dma_get_virt(x->devs_dma), ++ grub_dma_get_phys(x->devs_dma)); ++ ++ /* Chapter 6.5 Event Ring Segment Table */ ++ x->eseg_dma = xhci_memalign_dma32(ALIGN_EVT_RING_TABLE, sizeof(*x->eseg), 0); ++ if (!x->eseg_dma) ++ goto fail; ++ x->eseg = grub_dma_get_virt(x->eseg_dma); ++ grub_memset((void *)x->eseg, 0, sizeof(*x->eseg)); ++ grub_arch_sync_dma_caches(x->eseg, sizeof(*x->eseg)); ++ grub_dprintf ("xhci", "XHCI init: event ring table memory %p (%x)\n", ++ grub_dma_get_virt(x->eseg_dma), ++ grub_dma_get_phys(x->eseg_dma)); ++ ++ x->cmds_dma = xhci_memalign_dma32(ALIGN_CMD_RING_SEG, sizeof(*x->cmds), ++ BOUNDARY_RING); ++ if (!x->cmds_dma) ++ goto fail; ++ x->cmds = grub_dma_get_virt(x->cmds_dma); ++ grub_memset((void *)x->cmds, 0, sizeof(*x->cmds)); ++ grub_arch_sync_dma_caches(x->cmds, sizeof(*x->cmds)); ++ grub_dprintf ("xhci", "XHCI init: command ring memory %p (%x)\n", ++ grub_dma_get_virt(x->cmds_dma), ++ grub_dma_get_phys(x->cmds_dma)); ++ ++ x->evts_dma = xhci_memalign_dma32(ALIGN_EVT_RING_SEG, sizeof(*x->evts), ++ BOUNDARY_RING); ++ if (!x->evts_dma) ++ goto fail; ++ x->evts = grub_dma_get_virt(x->evts_dma); ++ grub_memset((void *)x->evts, 0, sizeof(*x->evts)); ++ grub_arch_sync_dma_caches(x->evts, sizeof(*x->evts)); ++ grub_dprintf ("xhci", "XHCI init: event ring memory %p (%x)\n", ++ grub_dma_get_virt(x->evts_dma), ++ grub_dma_get_phys(x->evts_dma)); ++ ++ /* Chapter 4.20 Scratchpad Buffers */ ++ reg = grub_xhci_read32(&x->caps->hcsparams2); ++ x->spb = (reg >> 21 & 0x1f) << 5 | reg >> 27; ++ if (x->spb) ++ { ++ volatile grub_uint64_t *spba; ++ grub_dprintf("xhci", "XHCI init: set up %d scratch pad buffers\n", ++ x->spb); ++ x->spba_dma = xhci_memalign_dma32(ALIGN_SPBA, sizeof(*spba) * x->spb, ++ x->pagesize); ++ if (!x->spba_dma) ++ goto fail; ++ ++ x->spad_dma = xhci_memalign_dma32(x->pagesize, x->pagesize * x->spb, ++ x->pagesize); ++ if (!x->spad_dma) ++ { ++ grub_dma_free(x->spba_dma); ++ goto fail; ++ } ++ ++ spba = grub_dma_get_virt(x->spba_dma); ++ for (grub_uint32_t i = 0; i < x->spb; i++) ++ spba[i] = (grub_addr_t)grub_dma_get_phys(x->spad_dma) + (i * x->pagesize); ++ grub_arch_sync_dma_caches(x->spba_dma, sizeof(*spba) * x->spb); ++ ++ x->devs[0].ptr_low = grub_dma_get_phys(x->spba_dma); ++ x->devs[0].ptr_high = 0; ++ grub_arch_sync_dma_caches(x->devs_dma, sizeof(x->devs[0])); ++ grub_dprintf ("xhci", "XHCI init: Allocated %d scratch buffers of size 0x%x\n", ++ x->spb, x->pagesize); ++ } ++ ++ grub_xhci_reset(x); ++ ++ /* Set the running bit */ ++ reg = grub_xhci_read32 (&x->op->usbcmd); ++ reg |= GRUB_XHCI_CMD_RS; ++ grub_xhci_write32 (&x->op->usbcmd, reg); ++ ++ ++ /* Link to xhci now that initialisation is successful. */ ++ x->next = xhci; ++ xhci = x; ++ ++ return; ++ ++fail: ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: FAILED!\n"); ++ if (x) ++ { ++ if (x->devs_dma) ++ grub_dma_free (x->devs_dma); ++ if (x->eseg_dma) ++ grub_dma_free (x->eseg_dma); ++ if (x->cmds_dma) ++ grub_dma_free (x->cmds_dma); ++ if (x->evts_dma) ++ grub_dma_free (x->evts_dma); ++ if (x->spad_dma) ++ grub_dma_free (x->spad_dma); ++ if (x->spba_dma) ++ grub_dma_free (x->spba_dma); ++ } ++ grub_free (x); ++ ++ return; ++} ++ ++static int ++grub_xhci_iterate (grub_usb_controller_iterate_hook_t hook, void *hook_data) ++{ ++ struct grub_xhci *x; ++ struct grub_usb_controller dev; ++ ++ for (x = xhci; x; x = x->next) ++ { ++ dev.data = x; ++ if (hook (&dev, hook_data)) ++ return 1; ++ } ++ ++ return 0; ++} ++ ++/**************************************************************** ++ * xHCI maintainance functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_update_hub_portcount (struct grub_xhci *x, ++ grub_usb_transfer_t transfer, ++ grub_uint32_t slotid) ++{ ++ struct grub_pci_dma_chunk *in_dma; ++ volatile struct grub_xhci_slotctx *hdslot; ++ grub_uint32_t epid = 0; ++ ++ if (!transfer || !transfer->dev || !transfer->dev->nports) ++ return GRUB_USB_ERR_NONE; ++ ++ hdslot = grub_dma_phys2virt(x->devs[slotid].ptr_low, x->devs_dma); ++ if ((hdslot->ctx[3] >> 27) == 3) ++ /* Already configured */ ++ return 0; ++ ++ grub_dprintf("xhci", "%s: updating hub config to %d ports\n", __func__, ++ transfer->dev->nports); ++ ++ xhci_check_status(x); ++ ++ /* Allocate input context and initialize endpoint info. */ ++ in_dma = grub_xhci_alloc_inctx(x, epid, transfer->dev); ++ if (!in_dma) ++ return GRUB_USB_ERR_INTERNAL; ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(in_dma); ++ ++ in->add = (1 << epid); ++ ++ struct grub_xhci_epctx *ep = (void*)&in[(epid+1) << x->flag64]; ++ ep->ctx[0] |= 1 << 26; ++ ep->ctx[1] |= transfer->dev->nports << 24; ++ ++ int cc = xhci_cmd_configure_endpoint(x, slotid, in_dma); ++ grub_dma_free(in_dma); ++ ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci", "%s: reconf ctl endpoint: failed (cc %d)\n", ++ __func__, cc); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static grub_usb_err_t ++grub_xhci_update_max_paket_size (struct grub_xhci *x, ++ grub_usb_transfer_t transfer, ++ grub_uint32_t slotid, ++ grub_uint32_t max_packet) ++{ ++ struct grub_pci_dma_chunk *in_dma; ++ grub_uint32_t epid = 1; ++ ++ if (!transfer || !transfer->dev || !max_packet) ++ return GRUB_USB_ERR_NONE; ++ ++ grub_dprintf("xhci", "%s: updating max packet size to 0x%x\n", __func__, ++ max_packet); ++ ++ xhci_check_status(x); ++ ++ /* Allocate input context and initialize endpoint info. */ ++ in_dma = grub_xhci_alloc_inctx(x, epid, transfer->dev); ++ if (!in_dma) ++ return GRUB_USB_ERR_INTERNAL; ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(in_dma); ++ in->add = (1 << epid); ++ ++ struct grub_xhci_epctx *ep = (void*)&in[(epid+1) << x->flag64]; ++ ep->ctx[1] |= max_packet << 16; ++ ++ int cc = xhci_cmd_evaluate_context(x, slotid, in_dma); ++ grub_dma_free(in_dma); ++ ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci", "%s: reconf ctl endpoint: failed (cc %d)\n", ++ __func__, cc); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI endpoint enablement functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_prepare_endpoint (struct grub_xhci *x, ++ struct grub_usb_device *dev, ++ grub_uint8_t endpoint, ++ grub_transfer_type_t dir, ++ grub_transaction_type_t type, ++ grub_uint32_t maxpaket, ++ struct grub_xhci_priv *priv) ++{ ++ grub_uint32_t epid; ++ struct grub_pci_dma_chunk *reqs_dma; ++ struct grub_pci_dma_chunk *in_dma; ++ volatile struct grub_xhci_ring *reqs; ++ volatile struct grub_xhci_slotctx *slotctx; ++ ++ if (!x || !priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ xhci_check_status(x); ++ ++ if (endpoint == 0) ++ { ++ epid = 1; ++ } ++ else ++ { ++ epid = (endpoint & 0x0f) * 2; ++ epid += (dir == GRUB_USB_TRANSFER_TYPE_IN) ? 1 : 0; ++ } ++ grub_dprintf("xhci", "%s: epid %d\n", __func__, epid); ++ ++ /* Test if already prepared */ ++ if (priv->slotid > 0 && priv->enpoint_trbs[epid] != NULL) ++ return GRUB_USB_ERR_NONE; ++ ++ /* Allocate DMA buffer as endpoint cmd TRB */ ++ reqs_dma = xhci_memalign_dma32(ALIGN_TRB, sizeof(*reqs), ++ BOUNDARY_RING); ++ if (!reqs_dma) ++ return GRUB_USB_ERR_INTERNAL; ++ reqs = grub_dma_get_virt(reqs_dma); ++ grub_memset((void *)reqs, 0, sizeof(*reqs)); ++ reqs->cs = 1; ++ ++ grub_arch_sync_dma_caches(reqs, sizeof(*reqs)); ++ ++ /* Allocate input context and initialize endpoint info. */ ++ in_dma = grub_xhci_alloc_inctx(x, epid, dev); ++ if (!in_dma) ++ { ++ grub_dma_free(reqs_dma); ++ return GRUB_USB_ERR_INTERNAL; ++ } ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(in_dma); ++ in->add = 0x01 | (1 << epid); ++ ++ struct grub_xhci_epctx *ep = (void*)&in[(epid+1) << x->flag64]; ++ switch (type) ++ { ++ case GRUB_USB_TRANSACTION_TYPE_CONTROL: ++ ep->ctx[1] |= 0 << 3; ++ break; ++ case GRUB_USB_TRANSACTION_TYPE_BULK: ++ ep->ctx[1] |= 2 << 3; ++ break; ++ } ++ if (dir == GRUB_USB_TRANSFER_TYPE_IN ++ || type== GRUB_USB_TRANSACTION_TYPE_CONTROL) ++ ep->ctx[1] |= 1 << 5; ++ ep->ctx[1] |= maxpaket << 16; ++ ep->deq_low = grub_dma_get_phys(reqs_dma); ++ ep->deq_low |= 1; /* dcs */ ++ ep->length = maxpaket; ++ ++ grub_dprintf("xhci", "%s: ring %p, epid %d, max %d\n", __func__, ++ reqs, epid, maxpaket); ++ if (epid == 1 || priv->slotid == 0) { ++ /* Enable slot. */ ++ int slotid = xhci_cmd_enable_slot(x); ++ if (slotid < 0) ++ { ++ grub_dprintf("xhci", "%s: enable slot: failed\n", __func__); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ grub_dprintf("xhci", "%s: get slot %d assigned\n", __func__, slotid); ++ ++ grub_uint32_t size = (sizeof(struct grub_xhci_slotctx) * GRUB_XHCI_MAX_ENDPOINTS) << x->flag64; ++ ++ /* Allocate memory for the device specific slot context */ ++ priv->slotctx_dma = xhci_memalign_dma32(ALIGN_SLOTCTX, size, ++ x->pagesize); ++ if (!priv->slotctx_dma) ++ { ++ grub_dprintf("xhci", "%s: grub_memalign_dma32 failed\n", __func__); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_INTERNAL; ++ } ++ slotctx = grub_dma_get_virt(priv->slotctx_dma); ++ ++ grub_dprintf("xhci", "%s: enable slot: got slotid %d\n", __func__, slotid); ++ grub_memset((void *)slotctx, 0, size); ++ grub_arch_sync_dma_caches(slotctx, size); ++ ++ x->devs[slotid].ptr_low = grub_dma_get_phys(priv->slotctx_dma); ++ x->devs[slotid].ptr_high = 0; ++ grub_arch_sync_dma_caches(&x->devs[slotid], sizeof(x->devs[0])); ++ ++ /* Send set_address command. */ ++ int cc = xhci_cmd_address_device(x, slotid, in_dma); ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci","%s: address device: failed (cc %d)\n", __func__, cc); ++ cc = xhci_cmd_disable_slot(x, slotid); ++ if (cc != CC_SUCCESS) { ++ grub_dprintf("xhci", "%s: disable failed (cc %d)\n", __func__, cc); ++ } else { ++ x->devs[slotid].ptr_low = 0; ++ x->devs[slotid].ptr_high = 0; ++ grub_arch_sync_dma_caches(&x->devs[slotid], sizeof(x->devs[0])); ++ } ++ grub_dma_free(priv->slotctx_dma); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ priv->enpoint_trbs[epid] = reqs; ++ priv->enpoint_trbs_dma[epid] = reqs_dma; ++ priv->slotid = slotid; ++ priv->max_packet = 0; ++ } ++ if (epid != 1) ++ { ++ /* Send configure command. */ ++ int cc = xhci_cmd_configure_endpoint(x, priv->slotid, in_dma); ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci", "%s: configure endpoint: failed (cc %d)\n", ++ __func__, cc); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ priv->enpoint_trbs[epid] = reqs; ++ priv->enpoint_trbs_dma[epid] = reqs_dma; ++ } ++ ++ grub_dprintf("xhci", "%s: done\n", __func__); ++ grub_dma_free(in_dma); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++ ++/**************************************************************** ++ * xHCI transfer helper functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_usb_to_grub_err (unsigned char status) ++{ ++ if (status != CC_SUCCESS) ++ grub_dprintf("xhci", "%s: xfer failed (cc %d)\n", __func__, status); ++ else ++ grub_dprintf("xhci", "%s: xfer done (cc %d)\n", __func__, status); ++ ++ if (status == CC_BABBLE_DETECTED) ++ return GRUB_USB_ERR_BABBLE; ++ else if (status == CC_DATA_BUFFER_ERROR) ++ return GRUB_USB_ERR_DATA; ++ else if (status == CC_STALL_ERROR) ++ return GRUB_USB_ERR_STALL; ++ else if (status != CC_SUCCESS) ++ return GRUB_USB_ERR_NAK; ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static int ++grub_xhci_transfer_is_zlp(grub_usb_transfer_t transfer, int idx) ++{ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ grub_usb_transaction_t tr = &transfer->transactions[idx]; ++ ++ return (tr->size == 0) && ++ ((tr->pid == GRUB_USB_TRANSFER_TYPE_OUT) || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_IN)); ++} ++ ++static int ++grub_xhci_transfer_is_last(grub_usb_transfer_t transfer, int idx) ++{ ++ return (idx + 1) == transfer->transcnt; ++} ++ ++static int ++grub_xhci_transfer_is_data(grub_usb_transfer_t transfer, int idx) ++{ ++ grub_usb_transaction_t tr; ++ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ tr = &transfer->transactions[idx]; ++ if (tr->size == 0 || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_SETUP)) ++ return 0; ++ ++ /* If there's are no DATA pakets before it's a DATA paket */ ++ for (int i = idx - 1; i >= 0; i--) ++ { ++ tr = &transfer->transactions[i]; ++ if (tr->size > 0 && ++ ((tr->pid == GRUB_USB_TRANSFER_TYPE_OUT) || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_IN))) ++ return 0; ++ } ++ return 1; ++} ++ ++static int ++grub_xhci_transfer_is_in(grub_usb_transfer_t transfer, int idx) ++{ ++ grub_usb_transaction_t tr; ++ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ tr = &transfer->transactions[idx]; ++ ++ return tr->pid == GRUB_USB_TRANSFER_TYPE_IN; ++} ++ ++static int ++grub_xhci_transfer_is_normal(grub_usb_transfer_t transfer, int idx) ++{ ++ grub_usb_transaction_t tr; ++ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ tr = &transfer->transactions[idx]; ++ if (tr->size == 0 || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_SETUP)) ++ return 0; ++ ++ /* If there's at least one DATA paket before it's a normal */ ++ for (int i = idx - 1; i >= 0; i--) ++ { ++ tr = &transfer->transactions[i]; ++ if (tr->size > 0 && ++ ((tr->pid == GRUB_USB_TRANSFER_TYPE_OUT) || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_IN))) ++ return 1; ++ ++ } ++ return 0; ++} ++ ++static int ++grub_xhci_transfer_next_is_normal(grub_usb_transfer_t transfer, int idx) ++{ ++ return grub_xhci_transfer_is_normal(transfer, idx + 1); ++} ++ ++static int ++grub_xhci_transfer_next_is_in(grub_usb_transfer_t transfer, int idx) ++{ ++ return grub_xhci_transfer_is_in(transfer, idx + 1); ++} ++ ++static grub_uint8_t grub_xhci_epid_from_transfer(grub_usb_transfer_t transfer) ++{ ++ grub_uint8_t epid; ++ ++ if (transfer->endpoint == 0) { ++ epid = 1; ++ } else { ++ epid = (transfer->endpoint & 0x0f) * 2; ++ epid += (transfer->dir == GRUB_USB_TRANSFER_TYPE_IN) ? 1 : 0; ++ } ++ return epid; ++} ++ ++/**************************************************************** ++ * xHCI transfer functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_setup_transfer (grub_usb_controller_t dev, ++ grub_usb_transfer_t transfer) ++{ ++ struct grub_xhci_transfer_controller_data *cdata; ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint8_t epid; ++ grub_usb_err_t err; ++ volatile struct grub_xhci_ring *reqs; ++ int rc; ++ struct grub_xhci_priv *priv; ++ ++ xhci_check_status(x); ++ ++ if (!dev || !transfer || !transfer->dev || !transfer->dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ priv = transfer->dev->xhci_priv; ++ err = grub_xhci_prepare_endpoint(x, transfer->dev, ++ transfer->endpoint, ++ transfer->dir, ++ transfer->type, ++ transfer->max, ++ priv); ++ ++ if (err != GRUB_USB_ERR_NONE) ++ return err; ++ ++ epid = grub_xhci_epid_from_transfer(transfer); ++ ++ /* Update the max packet size once descdev.maxsize0 is valid */ ++ if (epid == 1 && ++ (priv->max_packet == 0) && ++ (transfer->dev->descdev.maxsize0 > 0)) ++ { ++ if (transfer->dev->speed == GRUB_USB_SPEED_SUPER) ++ priv->max_packet = 1UL << transfer->dev->descdev.maxsize0; ++ else ++ priv->max_packet = transfer->dev->descdev.maxsize0; ++ err = grub_xhci_update_max_paket_size(x, transfer, priv->slotid, priv->max_packet); ++ if (err != GRUB_USB_ERR_NONE) ++ { ++ grub_dprintf("xhci", "%s: Updating max paket size failed\n", __func__); ++ return err; ++ } ++ } ++ if (epid == 1 && ++ transfer->dev->descdev.class == 9 && ++ transfer->dev->nports > 0) ++ { ++ err = grub_xhci_update_hub_portcount(x, transfer, priv->slotid); ++ if (err != GRUB_USB_ERR_NONE) ++ { ++ grub_dprintf("xhci", "%s: Updating max paket size failed\n", __func__); ++ return err; ++ } ++ } ++ ++ /* Allocate private data for the transfer */ ++ cdata = grub_zalloc(sizeof(*cdata)); ++ if (!cdata) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ reqs = priv->enpoint_trbs[epid]; ++ ++ transfer->controller_data = cdata; ++ ++ /* Now queue the transfer onto the TRB */ ++ if (transfer->type == GRUB_USB_TRANSACTION_TYPE_CONTROL) ++ { ++ volatile struct grub_usb_packet_setup *setupdata; ++ setupdata = (void *)transfer->transactions[0].data; ++ grub_dprintf("xhci", "%s: CONTROLL TRANS req %d\n", __func__, setupdata->request); ++ grub_dprintf("xhci", "%s: CONTROLL TRANS length %d\n", __func__, setupdata->length); ++ ++ if (setupdata && setupdata->request == GRUB_USB_REQ_SET_ADDRESS) ++ return GRUB_USB_ERR_NONE; ++ ++ if (transfer->transcnt < 2) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ for (int i = 0; i < transfer->transcnt; i++) ++ { ++ grub_uint32_t flags = 0; ++ grub_uint64_t inline_data; ++ grub_usb_transaction_t tr = &transfer->transactions[i]; ++ ++ switch (tr->pid) ++ { ++ case GRUB_USB_TRANSFER_TYPE_SETUP: ++ { ++ grub_dprintf("xhci", "%s: SETUP PKG\n", __func__); ++ grub_dprintf("xhci", "%s: transfer->size %d\n", __func__, transfer->size); ++ grub_dprintf("xhci", "%s: tr->size %d SETUP PKG\n", __func__, tr->size); ++ ++ flags |= (TR_SETUP << 10); ++ flags |= TRB_TR_IDT; ++ ++ if (transfer->size > 0) ++ { ++ if (grub_xhci_transfer_next_is_in(transfer, i)) ++ flags |= (3 << 16); /* TRT IN */ ++ else ++ flags |= (2 << 16); /* TRT OUT */ ++ } ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_OUT: ++ { ++ grub_dprintf("xhci", "%s: OUT PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_IN: ++ { ++ grub_dprintf("xhci", "%s: IN PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ flags |= TRB_TR_DIR; ++ break; ++ } ++ } ++ ++ if (grub_xhci_transfer_is_normal(transfer, i)) ++ flags |= (TR_NORMAL << 10); ++ else if (grub_xhci_transfer_is_data(transfer, i)) ++ flags |= (TR_DATA << 10); ++ else if (grub_xhci_transfer_is_zlp(transfer, i)) ++ flags |= (TR_STATUS << 10); ++ ++ if (grub_xhci_transfer_next_is_normal(transfer, i)) ++ flags |= TRB_TR_CH; ++ ++ if (grub_xhci_transfer_is_last(transfer, i)) ++ flags |= TRB_TR_IOC; ++ ++ /* Assume the ring has enough free space for all TRBs */ ++ if (flags & TRB_TR_IDT && tr->size <= (int)sizeof(inline_data)) ++ { ++ grub_memcpy(&inline_data, (void *)tr->data, tr->size); ++ xhci_trb_queue(reqs, inline_data, tr->size, flags); ++ } ++ else ++ { ++ xhci_trb_queue(reqs, tr->data, tr->size, flags); ++ } ++ } ++ } ++ else if (transfer->type == GRUB_USB_TRANSACTION_TYPE_BULK) ++ { ++ for (int i = 0; i < transfer->transcnt; i++) ++ { ++ grub_uint32_t flags = (TR_NORMAL << 10); ++ grub_usb_transaction_t tr = &transfer->transactions[i]; ++ switch (tr->pid) ++ { ++ case GRUB_USB_TRANSFER_TYPE_OUT: ++ { ++ grub_dprintf("xhci", "%s: OUT PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_IN: ++ { ++ grub_dprintf("xhci", "%s: IN PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ flags |= TRB_TR_DIR; ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_SETUP: ++ break; ++ } ++ if (grub_xhci_transfer_is_last(transfer, i)) ++ flags |= TRB_TR_IOC; ++ ++ /* The ring might be to small, submit while adding new entries */ ++ rc = xhci_trb_queue_and_flush(x, priv->slotid, epid, ++ reqs, tr->data, tr->size, flags); ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ else if (rc > 1) ++ return grub_xhci_usb_to_grub_err(rc); ++ ++ } ++ } ++ xhci_doorbell(x, priv->slotid, epid); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static grub_usb_err_t ++grub_xhci_check_transfer (grub_usb_controller_t dev, ++ grub_usb_transfer_t transfer, grub_size_t * actual) ++{ ++ grub_uint32_t status; ++ grub_uint32_t remaining; ++ grub_uint8_t epid; ++ volatile struct grub_xhci_ring *reqs; ++ grub_usb_err_t err; ++ int rc; ++ ++ if (!dev->data || !transfer->controller_data || !transfer->dev || ++ !transfer->dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ ++ struct grub_xhci_priv *priv = transfer->dev->xhci_priv; ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ struct grub_xhci_transfer_controller_data *cdata = ++ transfer->controller_data; ++ ++ xhci_check_status(x); ++ xhci_process_events(x); ++ ++ epid = grub_xhci_epid_from_transfer(transfer); ++ ++ reqs = priv->enpoint_trbs[epid]; ++ ++ /* XXX: invalidate caches */ ++ ++ /* Get current status from event ring buffer */ ++ status = (reqs->evt.status>> 24) & 0xff; ++ remaining = reqs->evt.status & 0xffffff; ++ ++ if (status != CC_STOPPED_LENGTH_INVALID) ++ *actual = cdata->transfer_size - remaining; ++ else ++ *actual = 0; ++ ++ if (xhci_ring_busy(reqs)) ++ return GRUB_USB_ERR_WAIT; ++ ++ grub_free(cdata); ++ ++ grub_dprintf("xhci", "%s: xfer done\n", __func__); ++ ++ err = grub_xhci_usb_to_grub_err(status); ++ if (err != GRUB_USB_ERR_NONE) ++ { ++ if (status == CC_STALL_ERROR) ++ { ++ /* Clear the stall by resetting the endpoint */ ++ rc = xhci_cmd_reset_endpoint(x, priv->slotid, epid, 1); ++ ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ return GRUB_USB_ERR_STALL; ++ } ++ else if (remaining > 0) ++ { ++ return GRUB_USB_ERR_DATA; ++ } ++ } ++ ++ return err; ++} ++ ++static grub_usb_err_t ++grub_xhci_cancel_transfer (grub_usb_controller_t dev, ++ grub_usb_transfer_t transfer) ++{ ++ grub_uint8_t epid; ++ volatile struct grub_xhci_ring *reqs; ++ struct grub_pci_dma_chunk *enpoint_trbs_dma; ++ grub_addr_t deque_pointer; ++ int rc; ++ ++ if (!dev->data || !transfer->controller_data || !transfer->dev || ++ !transfer->dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ struct grub_xhci_transfer_controller_data *cdata = ++ transfer->controller_data; ++ struct grub_xhci_priv *priv = transfer->dev->xhci_priv; ++ ++ epid = grub_xhci_epid_from_transfer(transfer); ++ ++ enpoint_trbs_dma = priv->enpoint_trbs_dma[epid]; ++ reqs = priv->enpoint_trbs[epid]; ++ ++ /* Abort current command */ ++ rc = xhci_cmd_stop_endpoint(x, priv->slotid, epid, 0); ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ /* Reset state */ ++ reqs->nidx = 0; ++ reqs->eidx = 0; ++ reqs->cs = 1; ++ ++ grub_arch_sync_dma_caches(reqs, sizeof(*reqs)); ++ ++ /* Reset the dequeue pointer to the begging of the TRB */ ++ deque_pointer = grub_dma_get_phys(enpoint_trbs_dma); ++ rc = xhci_cmd_set_dequeue_pointer(x, priv->slotid, epid, deque_pointer| 1 ); ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ reqs->evt.ptr_low = 0; ++ reqs->evt.ptr_high = 0; ++ reqs->evt.control = 0; ++ reqs->evt.status = 0; ++ ++ grub_arch_sync_dma_caches(reqs, sizeof(*reqs)); ++ ++ /* Restart ring buffer processing */ ++ xhci_doorbell(x, priv->slotid, epid); ++ ++ grub_free (cdata); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI port status functions ++ ****************************************************************/ ++ ++static int ++grub_xhci_hubports (grub_usb_controller_t dev) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint32_t portinfo; ++ ++ portinfo = x->ports; ++ grub_dprintf ("xhci", "root hub ports=%d\n", portinfo); ++ return portinfo; ++} ++ ++static grub_usb_err_t ++grub_xhci_portstatus (grub_usb_controller_t dev, ++ unsigned int port, unsigned int enable) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint32_t portsc, pls; ++ grub_uint32_t end; ++ ++ portsc = grub_xhci_port_read(x, port); ++ pls = xhci_get_field(portsc, XHCI_PORTSC_PLS); ++ ++ grub_dprintf("xhci", "grub_xhci_portstatus port #%d: 0x%08x,%s%s pls %d enable %d\n", ++ port, portsc, ++ (portsc & GRUB_XHCI_PORTSC_PP) ? " powered," : "", ++ (portsc & GRUB_XHCI_PORTSC_PED) ? " enabled," : "", ++ pls, enable); ++ xhci_check_status(x); ++ ++ if ((enable && (portsc & GRUB_XHCI_PORTSC_PED)) || ++ (!enable && !(portsc & GRUB_XHCI_PORTSC_PED))) ++ return GRUB_USB_ERR_NONE; ++ ++ if (!enable) ++ { ++ /* Disable port */ ++ grub_xhci_port_write(x, port, ~0, GRUB_XHCI_PORTSC_PED); ++ return GRUB_USB_ERR_NONE; ++ } ++ ++ grub_dprintf ("xhci", "portstatus: XHCI STATUS: %08x\n", ++ grub_xhci_read32(&x->op->usbsts)); ++ grub_dprintf ("xhci", ++ "portstatus: begin, iobase=%p, port=%d, status=0x%08x\n", ++ x->caps, port, portsc); ++ ++ switch (pls) ++ { ++ case PLS_U0: ++ /* A USB3 port - controller automatically performs reset */ ++ break; ++ case PLS_POLLING: ++ /* A USB2 port - perform device reset */ ++ grub_xhci_port_write(x, port, ~GRUB_XHCI_PORTSC_PED, GRUB_XHCI_PORTSC_PR); ++ break; ++ default: ++ return GRUB_USB_ERR_NONE; ++ } ++ ++ /* Wait for device to complete reset and be enabled */ ++ end = grub_get_time_ms () + 100; ++ for (;;) ++ { ++ portsc = grub_xhci_port_read(x, port); ++ if (!(portsc & GRUB_XHCI_PORTSC_CCS)) ++ { ++ /* Device disconnected during reset */ ++ grub_dprintf ("xhci","ERROR: %s device disconnected\n", __func__); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ if (portsc & GRUB_XHCI_PORTSC_PED) ++ /* Reset complete */ ++ break; ++ if (grub_get_time_ms () > end) ++ { ++ grub_dprintf ("xhci","ERROR: %s TIMEOUT\n", __func__); ++ return GRUB_USB_ERR_TIMEOUT; ++ } ++ } ++ xhci_check_status(x); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI detect device functions ++ ****************************************************************/ ++ ++static grub_usb_speed_t ++grub_xhci_detect_dev (grub_usb_controller_t dev, int port, int *changed) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint32_t portsc, speed; ++ ++ *changed = 0; ++ grub_dprintf("xhci", "%s: dev=%p USB%d_%d port %d\n", __func__, dev, ++ x->psids[port-1].major, x->psids[port-1].minor, port); ++ ++ /* On shutdown advertise all ports as disconnected. This will trigger ++ * a gracefull detatch. */ ++ if (x->shutdown) ++ { ++ *changed = 1; ++ return GRUB_USB_SPEED_NONE; ++ } ++ ++ /* Don't advertise new devices, connecting will fail if halted */ ++ if (xhci_is_halted(x)) ++ return GRUB_USB_SPEED_NONE; ++ ++ portsc = grub_xhci_port_read(x, port); ++ speed = xhci_get_field(portsc, XHCI_PORTSC_SPEED); ++ grub_uint8_t pls = xhci_get_field(portsc, XHCI_PORTSC_PLS); ++ ++ grub_dprintf("xhci", "grub_xhci_portstatus port #%d: 0x%08x,%s%s pls %d\n", ++ port, portsc, ++ (portsc & GRUB_XHCI_PORTSC_PP) ? " powered," : "", ++ (portsc & GRUB_XHCI_PORTSC_PED) ? " enabled," : "", ++ pls); ++ ++ /* Connect Status Change bit - it detects change of connection */ ++ if (portsc & GRUB_XHCI_PORTSC_CSC) ++ { ++ *changed = 1; ++ ++ grub_xhci_port_write(x, port, ~GRUB_XHCI_PORTSC_PED, GRUB_XHCI_PORTSC_CSC); ++ } ++ ++ if (!(portsc & GRUB_XHCI_PORTSC_CCS)) ++ return GRUB_USB_SPEED_NONE; ++ ++ for (grub_uint8_t i = 0; i < 16 && x->psids[port-1].psids[i].id > 0; i++) ++ { ++ if (x->psids[port-1].psids[i].id == speed) ++ { ++ grub_dprintf("xhci", "%s: grub_usb_speed = %d\n", __func__, ++ x->psids[port-1].psids[i].grub_usb_speed ); ++ return x->psids[port-1].psids[i].grub_usb_speed; ++ } ++ } ++ ++ return GRUB_USB_SPEED_NONE; ++} ++ ++/**************************************************************** ++ * xHCI attach/detach functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_attach_dev (grub_usb_controller_t ctrl, grub_usb_device_t dev) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) ctrl->data; ++ grub_usb_err_t err; ++ grub_uint32_t max; ++ ++ grub_dprintf("xhci", "%s: dev=%p\n", __func__, dev); ++ ++ if (!dev || !x) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ dev->xhci_priv = grub_zalloc (sizeof (struct grub_xhci_priv)); ++ if (!dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ ++ switch (dev->speed) ++ { ++ case GRUB_USB_SPEED_LOW: ++ { ++ max = 8; ++ break; ++ } ++ case GRUB_USB_SPEED_FULL: ++ case GRUB_USB_SPEED_HIGH: ++ { ++ max = 64; ++ break; ++ } ++ case GRUB_USB_SPEED_SUPER: ++ { ++ max = 512; ++ break; ++ } ++ default: ++ case GRUB_USB_SPEED_NONE: ++ { ++ max = 0; ++ } ++ } ++ ++ /* Assign a slot, assign an address and configure endpoint 0 */ ++ err = grub_xhci_prepare_endpoint(x, dev, ++ 0, ++ 0, ++ GRUB_USB_TRANSACTION_TYPE_CONTROL, ++ max, ++ dev->xhci_priv); ++ ++ return err; ++} ++ ++static grub_usb_err_t ++grub_xhci_detach_dev (grub_usb_controller_t ctrl, grub_usb_device_t dev) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) ctrl->data; ++ struct grub_xhci_priv *priv; ++ int cc = CC_SUCCESS; ++ ++ grub_dprintf("xhci", "%s: dev=%p\n", __func__, dev); ++ ++ if (!dev) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ if (dev->xhci_priv) ++ { ++ priv = dev->xhci_priv; ++ /* Stop endpoints and free ring buffer */ ++ for (int i = 0; i < GRUB_XHCI_MAX_ENDPOINTS; i++) ++ { ++ if (priv->enpoint_trbs[i] != NULL) ++ { ++ cc = xhci_cmd_stop_endpoint(x, priv->slotid, i, 1); ++ if (cc != CC_SUCCESS) ++ grub_dprintf("xhci", "Failed to disable EP%d on slot %d\n", i, ++ priv->slotid); ++ ++ grub_dprintf("xhci", "grub_dma_free[%d]\n", i); ++ ++ grub_dma_free(priv->enpoint_trbs_dma[i]); ++ priv->enpoint_trbs[i] = NULL; ++ priv->enpoint_trbs_dma[i] = NULL; ++ } ++ } ++ ++ cc = xhci_cmd_disable_slot(x, priv->slotid); ++ if (cc == CC_SUCCESS) ++ { ++ if (priv->slotctx_dma) ++ grub_dma_free(priv->slotctx_dma); ++ x->devs[priv->slotid].ptr_low = 0; ++ x->devs[priv->slotid].ptr_high = 0; ++ grub_arch_sync_dma_caches(&x->devs[priv->slotid], sizeof(x->devs[0])); ++ } ++ else ++ grub_dprintf("xhci", "Failed to disable slot %d\n", priv->slotid); ++ ++ grub_free(dev->xhci_priv); ++ } ++ ++ dev->xhci_priv = NULL; ++ ++ if (cc != CC_SUCCESS) ++ return GRUB_USB_ERR_BADDEVICE; ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI terminate functions ++ ****************************************************************/ ++ ++static void ++grub_xhci_halt(struct grub_xhci *x) ++{ ++ grub_uint32_t reg; ++ ++ /* Halt the command ring */ ++ reg = grub_xhci_read32(&x->op->crcr_low); ++ grub_xhci_write32(&x->op->crcr_low, reg | 4); ++ ++ int rc = xhci_event_wait(x, x->cmds, 100); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ if (rc < 0) ++ return; ++ ++ /* Stop the controller */ ++ reg = grub_xhci_read32(&x->op->usbcmd); ++ if (reg & GRUB_XHCI_CMD_RS) ++ { ++ reg &= ~GRUB_XHCI_CMD_RS; ++ grub_xhci_write32(&x->op->usbcmd, reg); ++ } ++ ++ return; ++} ++ ++static grub_err_t ++grub_xhci_fini_hw (int noreturn __attribute__ ((unused))) ++{ ++ struct grub_xhci *x; ++ ++ /* We should disable all XHCI HW to prevent any DMA access etc. */ ++ for (x = xhci; x; x = x->next) ++ { ++ x->shutdown = 1; ++ ++ /* Gracefully detach active devices */ ++ grub_usb_poll_devices(0); ++ ++ /* Check if xHCI is halted and halt it if not */ ++ grub_xhci_halt (x); ++ ++ /* Reset xHCI */ ++ if (grub_xhci_reset (x) != GRUB_USB_ERR_NONE) ++ return GRUB_ERR_BAD_DEVICE; ++ } ++ ++ return GRUB_ERR_NONE; ++} ++ ++static struct grub_usb_controller_dev usb_controller = { ++ .name = "xhci", ++ .iterate = grub_xhci_iterate, ++ .setup_transfer = grub_xhci_setup_transfer, ++ .check_transfer = grub_xhci_check_transfer, ++ .cancel_transfer = grub_xhci_cancel_transfer, ++ .hubports = grub_xhci_hubports, ++ .portstatus = grub_xhci_portstatus, ++ .detect_dev = grub_xhci_detect_dev, ++ .attach_dev = grub_xhci_attach_dev, ++ .detach_dev = grub_xhci_detach_dev, ++ /* estimated max. count of TDs for one bulk transfer */ ++ .max_bulk_tds = GRUB_XHCI_RING_ITEMS - 3 ++}; ++ ++GRUB_MOD_INIT (xhci) ++{ ++ grub_stop_disk_firmware (); ++ ++ grub_boot_time ("Initing XHCI hardware"); ++ grub_xhci_pci_scan (); ++ grub_boot_time ("Registering XHCI driver"); ++ grub_usb_controller_dev_register (&usb_controller); ++ grub_boot_time ("XHCI driver registered"); ++} ++ ++GRUB_MOD_FINI (xhci) ++{ ++ grub_xhci_fini_hw (0); ++ grub_usb_controller_dev_unregister (&usb_controller); ++} +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 609faf7d0..eb71fa1c7 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -338,6 +338,10 @@ grub_usb_cancel_transfer (grub_usb_transfer_t trans); + void + grub_ehci_init_device (volatile void *regs); + void ++grub_xhci_init_device (volatile void *regs); ++void + grub_ehci_pci_scan (void); ++void ++grub_xhci_pci_scan (void); + + #endif /* GRUB_USB_H */ +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0007-grub-core-bus-usb-usbhub-Add-xHCI-non-root-hub-suppo.patch b/config/grub/xhci/patches/0005-xhci/0007-grub-core-bus-usb-usbhub-Add-xHCI-non-root-hub-suppo.patch new file mode 100644 index 00000000..a37bbd6b --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0007-grub-core-bus-usb-usbhub-Add-xHCI-non-root-hub-suppo.patch @@ -0,0 +1,127 @@ +From 2a2c64f6ea62337c1263a70f6ca9a9bade66b78b Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Thu, 3 Dec 2020 13:44:55 +0100 +Subject: [PATCH 7/8] grub-core/bus/usb/usbhub: Add xHCI non root hub support + +Tested on Intel PCH C246, the USB3 hub can be configured by grub. + +Issues: +* USB3 devices connected behind that hub are sometimes not detected. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/usbhub.c | 38 +++++++++++++++++++++++++++++++++----- + include/grub/usbdesc.h | 1 + + include/grub/usbtrans.h | 4 ++++ + 3 files changed, 38 insertions(+), 5 deletions(-) + +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index b4b3a1a61..e96505aa9 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -148,19 +148,32 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + return dev; + } + +- ++static grub_usb_err_t ++grub_usb_set_hub_depth(grub_usb_device_t dev, grub_uint8_t depth) ++{ ++ return grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT ++ | GRUB_USB_REQTYPE_CLASS ++ | GRUB_USB_REQTYPE_TARGET_DEV), ++ GRUB_USB_HUB_REQ_SET_HUB_DEPTH, depth, ++ 0, 0, NULL); ++} ++ + static grub_usb_err_t + grub_usb_add_hub (grub_usb_device_t dev) + { + struct grub_usb_usb_hubdesc hubdesc; + grub_usb_err_t err; ++ grub_uint16_t req; + int i; + ++ req = (dev->speed == GRUB_USB_SPEED_SUPER) ? GRUB_USB_DESCRIPTOR_SS_HUB : ++ GRUB_USB_DESCRIPTOR_HUB; ++ + err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_IN + | GRUB_USB_REQTYPE_CLASS + | GRUB_USB_REQTYPE_TARGET_DEV), +- GRUB_USB_REQ_GET_DESCRIPTOR, +- (GRUB_USB_DESCRIPTOR_HUB << 8) | 0, ++ GRUB_USB_REQ_GET_DESCRIPTOR, ++ (req << 8) | 0, + 0, sizeof (hubdesc), (char *) &hubdesc); + if (err) + return err; +@@ -183,6 +196,19 @@ grub_usb_add_hub (grub_usb_device_t dev) + return GRUB_USB_ERR_INTERNAL; + } + ++ if (dev->speed == GRUB_USB_SPEED_SUPER) ++ { ++ grub_uint8_t depth; ++ grub_uint32_t route; ++ /* Depth maximum value is 5, but root hubs doesn't count */ ++ for (depth = 0, route = dev->route; (route & 0xf) > 0; route >>= 4) ++ depth++; ++ ++ err = grub_usb_set_hub_depth(dev, depth); ++ if (err) ++ return err; ++ } ++ + /* Power on all Hub ports. */ + for (i = 1; i <= hubdesc.portcnt; i++) + { +@@ -637,7 +663,9 @@ poll_nonroot_hub (grub_usb_device_t dev) + int split_hubaddr = 0; + + /* Determine the device speed. */ +- if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED) ++ if (dev->speed == GRUB_USB_SPEED_SUPER) ++ speed = GRUB_USB_SPEED_SUPER; ++ else if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED) + speed = GRUB_USB_SPEED_LOW; + else + { +@@ -651,7 +679,7 @@ poll_nonroot_hub (grub_usb_device_t dev) + grub_millisleep (10); + + /* Find correct values for SPLIT hubport and hubaddr */ +- if (speed == GRUB_USB_SPEED_HIGH) ++ if (speed == GRUB_USB_SPEED_HIGH || speed == GRUB_USB_SPEED_SUPER) + { + /* HIGH speed device needs not transaction translation */ + split_hubport = 0; +diff --git a/include/grub/usbdesc.h b/include/grub/usbdesc.h +index bb2ab2e27..1697aa465 100644 +--- a/include/grub/usbdesc.h ++++ b/include/grub/usbdesc.h +@@ -30,6 +30,7 @@ typedef enum { + GRUB_USB_DESCRIPTOR_ENDPOINT, + GRUB_USB_DESCRIPTOR_DEBUG = 10, + GRUB_USB_DESCRIPTOR_HUB = 0x29, ++ GRUB_USB_DESCRIPTOR_SS_HUB = 0x2a, + GRUB_USB_DESCRIPTOR_SS_ENDPOINT_COMPANION = 0x30 + } grub_usb_descriptor_t; + +diff --git a/include/grub/usbtrans.h b/include/grub/usbtrans.h +index 039ebed65..d6c3f71dc 100644 +--- a/include/grub/usbtrans.h ++++ b/include/grub/usbtrans.h +@@ -110,6 +110,10 @@ enum + GRUB_USB_REQ_SET_INTERFACE = 0x0B, + GRUB_USB_REQ_SYNC_FRAME = 0x0C + }; ++enum ++ { ++ GRUB_USB_HUB_REQ_SET_HUB_DEPTH = 0x0C, ++ }; + + #define GRUB_USB_FEATURE_ENDP_HALT 0x00 + #define GRUB_USB_FEATURE_DEV_REMOTE_WU 0x01 +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0008-Fix-compilation-on-x86_64.patch b/config/grub/xhci/patches/0005-xhci/0008-Fix-compilation-on-x86_64.patch new file mode 100644 index 00000000..af79c3d0 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0008-Fix-compilation-on-x86_64.patch @@ -0,0 +1,90 @@ +From 871d768f8c5c960cb0d9761a9028b16882e1a7d3 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Wed, 24 Feb 2021 08:25:41 +0100 +Subject: [PATCH 8/8] Fix compilation on x86_64 + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/xhci.c | 24 ++++++++++++++++-------- + 1 file changed, 16 insertions(+), 8 deletions(-) + +diff --git a/grub-core/bus/usb/xhci.c b/grub-core/bus/usb/xhci.c +index f4591ffb5..3495bb919 100644 +--- a/grub-core/bus/usb/xhci.c ++++ b/grub-core/bus/usb/xhci.c +@@ -184,7 +184,7 @@ enum + * then we can get it from a trb pointer (provided by evt ring). + */ + #define XHCI_RING(_trb) \ +- ((struct grub_xhci_ring*)((grub_uint32_t)(_trb) & ~(GRUB_XHCI_RING_SIZE-1))) ++ ((struct grub_xhci_ring*)((grub_addr_t)(_trb) & ~(GRUB_XHCI_RING_SIZE-1))) + + /* slot context */ + struct grub_xhci_slotctx { +@@ -495,6 +495,14 @@ grub_xhci_read8(volatile void *addr) { + return (*((volatile grub_uint32_t *)addr)); + } + ++static inline void * ++grub_xhci_read_etrb_ptr(volatile struct grub_xhci_trb *trb) { ++ grub_uint64_t tmp; ++ tmp = (grub_uint64_t)grub_xhci_read32(&trb->ptr_low); ++ tmp |= ((grub_uint64_t)grub_xhci_read32(&trb->ptr_high)) << 32; ++ return (void *)(grub_addr_t)tmp; ++} ++ + static inline grub_uint32_t + grub_xhci_port_read (struct grub_xhci *x, grub_uint32_t port) + { +@@ -664,7 +672,7 @@ static void xhci_process_events(struct grub_xhci *x) + case ER_TRANSFER: + case ER_COMMAND_COMPLETE: + { +- struct grub_xhci_trb *rtrb = (void*)grub_xhci_read32(&etrb->ptr_low); ++ struct grub_xhci_trb *rtrb = grub_xhci_read_etrb_ptr(etrb); + struct grub_xhci_ring *ring = XHCI_RING(rtrb); + volatile struct grub_xhci_trb *evt = &ring->evt; + grub_uint32_t eidx = rtrb - ring->ring + 1; +@@ -697,9 +705,9 @@ static void xhci_process_events(struct grub_xhci *x) + } + grub_xhci_write32(&evts->nidx, nidx); + volatile struct grub_xhci_ir *ir = x->ir; +- grub_uint32_t erdp = (grub_uint32_t)(evts->ring + nidx); +- grub_xhci_write32(&ir->erdp_low, erdp); +- grub_xhci_write32(&ir->erdp_high, 0); ++ grub_uint64_t erdp = (grub_addr_t)(void *)(&evts->ring[nidx]); ++ grub_xhci_write32(&ir->erdp_low, erdp & 0xffffffff); ++ grub_xhci_write32(&ir->erdp_high, erdp >> 32); + } + } + +@@ -800,7 +808,7 @@ static void xhci_trb_queue(volatile struct grub_xhci_ring *ring, + grub_uint32_t xferlen, grub_uint32_t flags) + { + grub_dprintf("xhci", "%s: ring %p data %llx len %d flags 0x%x remain 0x%x\n", __func__, +- ring, data_or_addr, xferlen & 0x1ffff, flags, xferlen >> 17); ++ ring, (unsigned long long)data_or_addr, xferlen & 0x1ffff, flags, xferlen >> 17); + + if (xhci_ring_full(ring)) + { +@@ -1907,7 +1915,7 @@ grub_xhci_setup_transfer (grub_usb_controller_t dev, + if (transfer->type == GRUB_USB_TRANSACTION_TYPE_CONTROL) + { + volatile struct grub_usb_packet_setup *setupdata; +- setupdata = (void *)transfer->transactions[0].data; ++ setupdata = (void *)(grub_addr_t)transfer->transactions[0].data; + grub_dprintf("xhci", "%s: CONTROLL TRANS req %d\n", __func__, setupdata->request); + grub_dprintf("xhci", "%s: CONTROLL TRANS length %d\n", __func__, setupdata->length); + +@@ -1974,7 +1982,7 @@ grub_xhci_setup_transfer (grub_usb_controller_t dev, + /* Assume the ring has enough free space for all TRBs */ + if (flags & TRB_TR_IDT && tr->size <= (int)sizeof(inline_data)) + { +- grub_memcpy(&inline_data, (void *)tr->data, tr->size); ++ grub_memcpy(&inline_data, (void *)(grub_addr_t)tr->data, tr->size); + xhci_trb_queue(reqs, inline_data, tr->size, flags); + } + else +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch b/config/grub/xhci/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch new file mode 100644 index 00000000..b00611a0 --- /dev/null +++ b/config/grub/xhci/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch @@ -0,0 +1,1074 @@ +From ef9d61ae9ed490301adf9ee064a9fc1190069d81 Mon Sep 17 00:00:00 2001 +From: Mate Kukri <km@mkukri.xyz> +Date: Mon, 20 May 2024 11:43:35 +0100 +Subject: Add native NVMe driver based on SeaBIOS + +Tested to successfully boot Debian on QEMU and OptiPlex 3050. + +Signed-off-by: Mate Kukri <km@mkukri.xyz> +--- + Makefile.am | 2 +- + grub-core/Makefile.core.def | 6 + + grub-core/commands/nativedisk.c | 1 + + grub-core/disk/nvme-int.h | 208 +++++++++ + grub-core/disk/nvme.c | 781 ++++++++++++++++++++++++++++++++ + include/grub/disk.h | 1 + + 6 files changed, 998 insertions(+), 1 deletion(-) + create mode 100644 grub-core/disk/nvme-int.h + create mode 100644 grub-core/disk/nvme.c + +diff --git a/Makefile.am b/Makefile.am +index 65016f856..7bc0866ba 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -434,7 +434,7 @@ if COND_i386_coreboot + FS_PAYLOAD_MODULES ?= $(shell cat grub-core/fs.lst) + default_payload.elf: grub-mkstandalone grub-mkimage FORCE + test -f $@ && rm $@ || true +- pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata xhci ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg ++ pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata nvme xhci ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg + endif + + endif +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index ea782666d..0f893369a 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -2602,3 +2602,9 @@ module = { + efi = commands/bli.c; + enable = efi; + }; ++ ++module = { ++ name = nvme; ++ common = disk/nvme.c; ++ enable = pci; ++}; +diff --git a/grub-core/commands/nativedisk.c b/grub-core/commands/nativedisk.c +index 580c8d3b0..a2c766fbd 100644 +--- a/grub-core/commands/nativedisk.c ++++ b/grub-core/commands/nativedisk.c +@@ -78,6 +78,7 @@ get_uuid (const char *name, char **uuid, int getnative) + case GRUB_DISK_DEVICE_ATA_ID: + case GRUB_DISK_DEVICE_SCSI_ID: + case GRUB_DISK_DEVICE_XEN: ++ case GRUB_DISK_DEVICE_NVME_ID: + if (getnative) + break; + /* FALLTHROUGH */ +diff --git a/grub-core/disk/nvme-int.h b/grub-core/disk/nvme-int.h +new file mode 100644 +index 000000000..1295b58aa +--- /dev/null ++++ b/grub-core/disk/nvme-int.h +@@ -0,0 +1,208 @@ ++// NVMe datastructures and constants ++// ++// Copyright 2017 Amazon.com, Inc. or its affiliates. ++// ++// This file may be distributed under the terms of the GNU LGPLv3 license. ++ ++#ifndef __NVME_INT_H ++#define __NVME_INT_H ++ ++#include <grub/types.h> ++ ++/* Data structures */ ++ ++/* The register file of a NVMe host controller. This struct follows the naming ++ scheme in the NVMe specification. */ ++struct nvme_reg { ++ grub_uint64_t cap; /* controller capabilities */ ++ grub_uint32_t vs; /* version */ ++ grub_uint32_t intms; /* interrupt mask set */ ++ grub_uint32_t intmc; /* interrupt mask clear */ ++ grub_uint32_t cc; /* controller configuration */ ++ grub_uint32_t _res0; ++ grub_uint32_t csts; /* controller status */ ++ grub_uint32_t _res1; ++ grub_uint32_t aqa; /* admin queue attributes */ ++ grub_uint64_t asq; /* admin submission queue base address */ ++ grub_uint64_t acq; /* admin completion queue base address */ ++}; ++ ++/* Submission queue entry */ ++struct nvme_sqe { ++ union { ++ grub_uint32_t dword[16]; ++ struct { ++ grub_uint32_t cdw0; /* Command DWORD 0 */ ++ grub_uint32_t nsid; /* Namespace ID */ ++ grub_uint64_t _res0; ++ grub_uint64_t mptr; /* metadata ptr */ ++ ++ grub_uint64_t dptr_prp1; ++ grub_uint64_t dptr_prp2; ++ }; ++ }; ++}; ++ ++/* Completion queue entry */ ++struct nvme_cqe { ++ union { ++ grub_uint32_t dword[4]; ++ struct { ++ grub_uint32_t cdw0; ++ grub_uint32_t _res0; ++ grub_uint16_t sq_head; ++ grub_uint16_t sq_id; ++ grub_uint16_t cid; ++ grub_uint16_t status; ++ }; ++ }; ++}; ++ ++/* The common part of every submission or completion queue. */ ++struct nvme_queue { ++ grub_uint32_t *dbl; /* doorbell */ ++ grub_uint16_t mask; /* length - 1 */ ++}; ++ ++struct nvme_cq { ++ struct nvme_queue common; ++ struct nvme_cqe *cqe; ++ ++ /* We have read upto (but not including) this entry in the queue. */ ++ grub_uint16_t head; ++ ++ /* The current phase bit the controller uses to indicate that it has written ++ a new entry. This is inverted after each wrap. */ ++ unsigned phase : 1; ++}; ++ ++struct nvme_sq { ++ struct nvme_queue common; ++ struct nvme_sqe *sqe; ++ ++ /* Corresponding completion queue. We only support a single SQ per CQ. */ ++ struct nvme_cq *cq; ++ ++ /* The last entry the controller has fetched. */ ++ grub_uint16_t head; ++ ++ /* The last value we have written to the tail doorbell. */ ++ grub_uint16_t tail; ++}; ++ ++struct nvme_ctrl { ++ grub_pci_device_t pci; ++ struct nvme_reg volatile *reg; ++ ++ grub_uint32_t ctrlnum; ++ ++ grub_uint32_t doorbell_stride; /* in bytes */ ++ ++ struct nvme_sq admin_sq; ++ struct nvme_cq admin_cq; ++ ++ grub_uint32_t ns_count; ++ ++ struct nvme_sq io_sq; ++ struct nvme_cq io_cq; ++}; ++ ++struct nvme_namespace { ++ struct nvme_namespace *next; ++ struct nvme_namespace **prev; ++ ++ char *devname; ++ ++ grub_uint32_t nsnum; ++ ++ struct nvme_ctrl *ctrl; ++ ++ grub_uint32_t ns_id; ++ ++ grub_uint64_t lba_count; /* The total amount of sectors. */ ++ ++ grub_uint32_t block_size; ++ grub_uint32_t metadata_size; ++ grub_uint32_t max_req_size; ++}; ++ ++/* Data structures for NVMe admin identify commands */ ++ ++struct nvme_identify_ctrl { ++ grub_uint16_t vid; ++ grub_uint16_t ssvid; ++ char sn[20]; ++ char mn[40]; ++ char fr[8]; ++ ++ grub_uint8_t rab; ++ grub_uint8_t ieee[3]; ++ grub_uint8_t cmic; ++ grub_uint8_t mdts; ++ ++ char _boring[516 - 78]; ++ ++ grub_uint32_t nn; /* number of namespaces */ ++}; ++ ++struct nvme_identify_ns_list { ++ grub_uint32_t ns_id[1024]; ++}; ++ ++struct nvme_lba_format { ++ grub_uint16_t ms; ++ grub_uint8_t lbads; ++ grub_uint8_t rp; ++}; ++ ++struct nvme_identify_ns { ++ grub_uint64_t nsze; ++ grub_uint64_t ncap; ++ grub_uint64_t nuse; ++ grub_uint8_t nsfeat; ++ grub_uint8_t nlbaf; ++ grub_uint8_t flbas; ++ ++ char _boring[128 - 27]; ++ ++ struct nvme_lba_format lbaf[16]; ++}; ++ ++union nvme_identify { ++ struct nvme_identify_ns ns; ++ struct nvme_identify_ctrl ctrl; ++ struct nvme_identify_ns_list ns_list; ++}; ++ ++/* NVMe constants */ ++ ++#define NVME_CAP_CSS_NVME (1ULL << 37) ++ ++#define NVME_CSTS_FATAL (1U << 1) ++#define NVME_CSTS_RDY (1U << 0) ++ ++#define NVME_CC_EN (1U << 0) ++ ++#define NVME_SQE_OPC_ADMIN_CREATE_IO_SQ 1U ++#define NVME_SQE_OPC_ADMIN_CREATE_IO_CQ 5U ++#define NVME_SQE_OPC_ADMIN_IDENTIFY 6U ++ ++#define NVME_SQE_OPC_IO_WRITE 1U ++#define NVME_SQE_OPC_IO_READ 2U ++ ++#define NVME_ADMIN_IDENTIFY_CNS_ID_NS 0U ++#define NVME_ADMIN_IDENTIFY_CNS_ID_CTRL 1U ++#define NVME_ADMIN_IDENTIFY_CNS_GET_NS_LIST 2U ++ ++#define NVME_CQE_DW3_P (1U << 16) ++ ++#define NVME_PAGE_SIZE 4096 ++#define NVME_PAGE_MASK ~(NVME_PAGE_SIZE - 1) ++ ++/* Length for the queue entries. */ ++#define NVME_SQE_SIZE_LOG 6 ++#define NVME_CQE_SIZE_LOG 4 ++ ++#endif ++ ++/* EOF */ +diff --git a/grub-core/disk/nvme.c b/grub-core/disk/nvme.c +new file mode 100644 +index 000000000..093237c70 +--- /dev/null ++++ b/grub-core/disk/nvme.c +@@ -0,0 +1,781 @@ ++// Low level NVMe disk access ++// ++// Based on SeaBIOS NVMe driver - Copyright 2017 Amazon.com, Inc. or its affiliates. ++// Port to GRUB2 done by Mate Kukri ++// ++// This file may be distributed under the terms of the GNU LGPLv3 license. ++ ++#include <grub/disk.h> ++#include <grub/dl.h> ++#include <grub/pci.h> ++#include "nvme-int.h" ++ ++GRUB_MOD_LICENSE ("GPLv3"); /* LGPLv3 in reality but it is GPLv3 compatible */ ++ ++static grub_uint32_t grub_nvme_ctrlcnt; ++static grub_uint32_t grub_nvme_nscnt; ++ ++static struct nvme_namespace *grub_nvme_namespaces; ++ ++// Page aligned "dma bounce buffer" of size NVME_PAGE_SIZE ++static void *nvme_dma_buffer; ++ ++static void * ++zalloc_page_aligned(grub_uint32_t size) ++{ ++ void *res = grub_memalign(NVME_PAGE_SIZE, size); ++ if (res) grub_memset(res, 0, size); ++ return res; ++} ++ ++static void ++nvme_init_queue_common(struct nvme_ctrl *ctrl, struct nvme_queue *q, grub_uint16_t q_idx, ++ grub_uint16_t length) ++{ ++ grub_memset(q, 0, sizeof(*q)); ++ q->dbl = (grub_uint32_t *)((char *)ctrl->reg + 0x1000 + q_idx * ctrl->doorbell_stride); ++ grub_dprintf("nvme", " q %p q_idx %u dbl %p\n", q, q_idx, q->dbl); ++ q->mask = length - 1; ++} ++ ++static int ++nvme_init_sq(struct nvme_ctrl *ctrl, struct nvme_sq *sq, grub_uint16_t q_idx, grub_uint16_t length, ++ struct nvme_cq *cq) ++{ ++ nvme_init_queue_common(ctrl, &sq->common, q_idx, length); ++ sq->sqe = zalloc_page_aligned(sizeof(*sq->sqe) * length); ++ ++ if (!sq->sqe) { ++ return -1; ++ } ++ ++ grub_dprintf("nvme", "sq %p q_idx %u sqe %p\n", sq, q_idx, sq->sqe); ++ sq->cq = cq; ++ sq->head = 0; ++ sq->tail = 0; ++ ++ return 0; ++} ++ ++static int ++nvme_init_cq(struct nvme_ctrl *ctrl, struct nvme_cq *cq, grub_uint16_t q_idx, grub_uint16_t length) ++{ ++ nvme_init_queue_common(ctrl, &cq->common, q_idx, length); ++ cq->cqe = zalloc_page_aligned(sizeof(*cq->cqe) * length); ++ if (!cq->cqe) { ++ return -1; ++ } ++ ++ cq->head = 0; ++ ++ /* All CQE phase bits are initialized to zero. This means initially we wait ++ for the host controller to set these to 1. */ ++ cq->phase = 1; ++ ++ return 0; ++} ++ ++static int ++nvme_poll_cq(struct nvme_cq *cq) ++{ ++ grub_uint32_t dw3 = *(volatile grub_uint32_t *) &cq->cqe[cq->head].dword[3]; ++ return (!!(dw3 & NVME_CQE_DW3_P) == cq->phase); ++} ++ ++static int ++nvme_is_cqe_success(struct nvme_cqe const *cqe) ++{ ++ return ((cqe->status >> 1) & 0xFF) == 0; ++} ++ ++static struct nvme_cqe ++nvme_error_cqe(void) ++{ ++ struct nvme_cqe r; ++ ++ /* 0xFF is a vendor specific status code != success. Should be okay for ++ indicating failure. */ ++ grub_memset(&r, 0xFF, sizeof(r)); ++ return r; ++} ++ ++static struct nvme_cqe ++nvme_consume_cqe(struct nvme_sq *sq) ++{ ++ struct nvme_cq *cq = sq->cq; ++ ++ if (!nvme_poll_cq(cq)) { ++ /* Cannot consume a completion queue entry, if there is none ready. */ ++ return nvme_error_cqe(); ++ } ++ ++ struct nvme_cqe *cqe = &cq->cqe[cq->head]; ++ grub_uint16_t cq_next_head = (cq->head + 1) & cq->common.mask; ++ grub_dprintf("nvme", "cq %p head %u -> %u\n", cq, cq->head, cq_next_head); ++ if (cq_next_head < cq->head) { ++ grub_dprintf("nvme", "cq %p wrap\n", cq); ++ cq->phase = ~cq->phase; ++ } ++ cq->head = cq_next_head; ++ ++ /* Update the submission queue head. */ ++ if (cqe->sq_head != sq->head) { ++ sq->head = cqe->sq_head; ++ grub_dprintf("nvme", "sq %p advanced to %u\n", sq, cqe->sq_head); ++ } ++ ++ /* Tell the controller that we consumed the completion. */ ++ *(volatile grub_uint32_t *) cq->common.dbl = cq->head; ++ ++ return *cqe; ++} ++ ++static struct nvme_cqe ++nvme_wait(struct nvme_sq *sq) ++{ ++ // static const unsigned nvme_timeout = 5000 /* ms */; ++ // grub_uint32_t to = timer_calc(nvme_timeout); ++ while (!nvme_poll_cq(sq->cq)) { ++ /* FIXME ++ yield(); ++ ++ if (timer_check(to)) { ++ warn_timeout(); ++ return nvme_error_cqe(); ++ }*/ ++ } ++ ++ return nvme_consume_cqe(sq); ++} ++ ++/* Returns the next submission queue entry (or NULL if the queue is full). It ++ also fills out Command Dword 0 and clears the rest. */ ++static struct nvme_sqe * ++nvme_get_next_sqe(struct nvme_sq *sq, grub_uint8_t opc, void *metadata, void *data, void *data2) ++{ ++ if (((sq->head + 1) & sq->common.mask) == sq->tail) { ++ grub_dprintf("nvme", "submission queue is full\n"); ++ return NULL; ++ } ++ ++ struct nvme_sqe *sqe = &sq->sqe[sq->tail]; ++ grub_dprintf("nvme", "sq %p next_sqe %u\n", sq, sq->tail); ++ ++ grub_memset(sqe, 0, sizeof(*sqe)); ++ sqe->cdw0 = opc | (sq->tail << 16 /* CID */); ++ sqe->mptr = (grub_uint32_t)metadata; ++ sqe->dptr_prp1 = (grub_uint32_t)data; ++ sqe->dptr_prp2 = (grub_uint32_t)data2; ++ ++ return sqe; ++} ++ ++/* Call this after you've filled out an sqe that you've got from nvme_get_next_sqe. */ ++static void ++nvme_commit_sqe(struct nvme_sq *sq) ++{ ++ grub_dprintf("nvme", "sq %p commit_sqe %u\n", sq, sq->tail); ++ sq->tail = (sq->tail + 1) & sq->common.mask; ++ *(volatile grub_uint32_t *) sq->common.dbl = sq->tail; ++} ++ ++/* Perform an identify command on the admin queue and return the resulting ++ buffer. This may be a NULL pointer, if something failed. This function ++ cannot be used after initialization, because it uses buffers in tmp zone. */ ++static union nvme_identify * ++nvme_admin_identify(struct nvme_ctrl *ctrl, grub_uint8_t cns, grub_uint32_t nsid) ++{ ++ union nvme_identify *identify_buf = zalloc_page_aligned(4096); ++ if (!identify_buf) ++ return NULL; ++ ++ struct nvme_sqe *cmd_identify; ++ cmd_identify = nvme_get_next_sqe(&ctrl->admin_sq, ++ NVME_SQE_OPC_ADMIN_IDENTIFY, NULL, ++ identify_buf, NULL); ++ if (!cmd_identify) ++ goto error; ++ ++ cmd_identify->nsid = nsid; ++ cmd_identify->dword[10] = cns; ++ ++ nvme_commit_sqe(&ctrl->admin_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ goto error; ++ } ++ ++ return identify_buf; ++ error: ++ grub_free(identify_buf); ++ return NULL; ++} ++ ++static struct nvme_identify_ctrl * ++nvme_admin_identify_ctrl(struct nvme_ctrl *ctrl) ++{ ++ return &nvme_admin_identify(ctrl, NVME_ADMIN_IDENTIFY_CNS_ID_CTRL, 0)->ctrl; ++} ++ ++static struct nvme_identify_ns * ++nvme_admin_identify_ns(struct nvme_ctrl *ctrl, grub_uint32_t ns_id) ++{ ++ return &nvme_admin_identify(ctrl, NVME_ADMIN_IDENTIFY_CNS_ID_NS, ++ ns_id)->ns; ++} ++ ++static void ++nvme_probe_ns(struct nvme_ctrl *ctrl, grub_uint32_t ns_idx, grub_uint8_t mdts) ++{ ++ grub_uint32_t ns_id = ns_idx + 1; ++ ++ struct nvme_identify_ns *id = nvme_admin_identify_ns(ctrl, ns_id); ++ if (!id) { ++ grub_dprintf("nvme", "NVMe couldn't identify namespace %u.\n", ns_id); ++ goto free_buffer; ++ } ++ ++ grub_uint8_t current_lba_format = id->flbas & 0xF; ++ if (current_lba_format > id->nlbaf) { ++ grub_dprintf("nvme", "NVMe NS %u: current LBA format %u is beyond what the " ++ " namespace supports (%u)?\n", ++ ns_id, current_lba_format, id->nlbaf + 1); ++ goto free_buffer; ++ } ++ ++ if (!id->nsze) { ++ grub_dprintf("nvme", "NVMe NS %u is inactive.\n", ns_id); ++ goto free_buffer; ++ } ++ ++ if (!nvme_dma_buffer) { ++ nvme_dma_buffer = zalloc_page_aligned(NVME_PAGE_SIZE); ++ if (!nvme_dma_buffer) { ++ goto free_buffer; ++ } ++ } ++ ++ struct nvme_namespace *ns = grub_malloc(sizeof(*ns)); ++ if (!ns) { ++ goto free_buffer; ++ } ++ grub_memset(ns, 0, sizeof(*ns)); ++ ns->ctrl = ctrl; ++ ns->ns_id = ns_id; ++ ns->lba_count = id->nsze; ++ ++ struct nvme_lba_format *fmt = &id->lbaf[current_lba_format]; ++ ++ ns->block_size = 1U << fmt->lbads; ++ ns->metadata_size = fmt->ms; ++ ++ if (ns->block_size > NVME_PAGE_SIZE) { ++ /* If we see devices that trigger this path, we need to increase our ++ buffer size. */ ++ grub_free(ns); ++ goto free_buffer; ++ } ++ ++ if (mdts) { ++ ns->max_req_size = ((1U << mdts) * NVME_PAGE_SIZE) / ns->block_size; ++ grub_dprintf("nvme", "NVME NS %u max request size: %d sectors\n", ++ ns_id, ns->max_req_size); ++ } else { ++ ns->max_req_size = -1U; ++ } ++ ++ ns->devname = grub_xasprintf("nvme%un%u", ctrl->ctrlnum, ns_id); ++ ns->nsnum = grub_nvme_nscnt++; ++ ++ grub_list_push (GRUB_AS_LIST_P (&grub_nvme_namespaces), GRUB_AS_LIST (ns)); ++ ++free_buffer: ++ grub_free(id); ++} ++ ++ ++/* Release memory allocated for a completion queue */ ++static void ++nvme_destroy_cq(struct nvme_cq *cq) ++{ ++ grub_free(cq->cqe); ++ cq->cqe = NULL; ++} ++ ++/* Release memory allocated for a submission queue */ ++static void ++nvme_destroy_sq(struct nvme_sq *sq) ++{ ++ grub_free(sq->sqe); ++ sq->sqe = NULL; ++} ++ ++/* Returns 0 on success. */ ++static int ++nvme_create_io_cq(struct nvme_ctrl *ctrl, struct nvme_cq *cq, grub_uint16_t q_idx) ++{ ++ int rc; ++ struct nvme_sqe *cmd_create_cq; ++ grub_uint32_t length = 1 + (ctrl->reg->cap & 0xffff); ++ if (length > NVME_PAGE_SIZE / sizeof(struct nvme_cqe)) ++ length = NVME_PAGE_SIZE / sizeof(struct nvme_cqe); ++ ++ rc = nvme_init_cq(ctrl, cq, q_idx, length); ++ if (rc) { ++ goto err; ++ } ++ ++ cmd_create_cq = nvme_get_next_sqe(&ctrl->admin_sq, ++ NVME_SQE_OPC_ADMIN_CREATE_IO_CQ, NULL, ++ cq->cqe, NULL); ++ if (!cmd_create_cq) { ++ goto err_destroy_cq; ++ } ++ ++ cmd_create_cq->dword[10] = (cq->common.mask << 16) | (q_idx >> 1); ++ cmd_create_cq->dword[11] = 1 /* physically contiguous */; ++ ++ nvme_commit_sqe(&ctrl->admin_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ grub_dprintf("nvme", "create io cq failed: %08x %08x %08x %08x\n", ++ cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); ++ ++ goto err_destroy_cq; ++ } ++ ++ return 0; ++ ++err_destroy_cq: ++ nvme_destroy_cq(cq); ++err: ++ return -1; ++} ++ ++/* Returns 0 on success. */ ++static int ++nvme_create_io_sq(struct nvme_ctrl *ctrl, struct nvme_sq *sq, grub_uint16_t q_idx, struct nvme_cq *cq) ++{ ++ int rc; ++ struct nvme_sqe *cmd_create_sq; ++ grub_uint32_t length = 1 + (ctrl->reg->cap & 0xffff); ++ if (length > NVME_PAGE_SIZE / sizeof(struct nvme_cqe)) ++ length = NVME_PAGE_SIZE / sizeof(struct nvme_cqe); ++ ++ rc = nvme_init_sq(ctrl, sq, q_idx, length, cq); ++ if (rc) { ++ goto err; ++ } ++ ++ cmd_create_sq = nvme_get_next_sqe(&ctrl->admin_sq, ++ NVME_SQE_OPC_ADMIN_CREATE_IO_SQ, NULL, ++ sq->sqe, NULL); ++ if (!cmd_create_sq) { ++ goto err_destroy_sq; ++ } ++ ++ cmd_create_sq->dword[10] = (sq->common.mask << 16) | (q_idx >> 1); ++ cmd_create_sq->dword[11] = (q_idx >> 1) << 16 | 1 /* contiguous */; ++ grub_dprintf("nvme", "sq %p create dword10 %08x dword11 %08x\n", sq, ++ cmd_create_sq->dword[10], cmd_create_sq->dword[11]); ++ ++ nvme_commit_sqe(&ctrl->admin_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ grub_dprintf("nvme", "create io sq failed: %08x %08x %08x %08x\n", ++ cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); ++ goto err_destroy_sq; ++ } ++ ++ return 0; ++ ++err_destroy_sq: ++ nvme_destroy_sq(sq); ++err: ++ return -1; ++} ++ ++/* Reads count sectors into buf. The buffer cannot cross page boundaries. */ ++static int ++nvme_io_xfer(struct nvme_namespace *ns, grub_uint64_t lba, void *prp1, void *prp2, ++ grub_uint16_t count, int write) ++{ ++ if (((grub_uint32_t)prp1 & 0x3) || ((grub_uint32_t)prp2 & 0x3)) { ++ /* Buffer is misaligned */ ++ return -1; ++ } ++ ++ struct nvme_sqe *io_read = nvme_get_next_sqe(&ns->ctrl->io_sq, ++ write ? NVME_SQE_OPC_IO_WRITE ++ : NVME_SQE_OPC_IO_READ, ++ NULL, prp1, prp2); ++ io_read->nsid = ns->ns_id; ++ io_read->dword[10] = (grub_uint32_t)lba; ++ io_read->dword[11] = (grub_uint32_t)(lba >> 32); ++ io_read->dword[12] = (1U << 31 /* limited retry */) | (count - 1); ++ ++ nvme_commit_sqe(&ns->ctrl->io_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ns->ctrl->io_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ grub_dprintf("nvme", "read io: %08x %08x %08x %08x\n", ++ cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); ++ ++ return -1; ++ } ++ ++ grub_dprintf("nvme", "ns %u %s lba %llu+%u\n", ns->ns_id, write ? "write" : "read", ++ lba, count); ++ return count; ++} ++ ++// Transfer up to one page of data using the internal dma bounce buffer ++static int ++nvme_bounce_xfer(struct nvme_namespace *ns, grub_uint64_t lba, void *buf, grub_uint16_t count, ++ int write) ++{ ++ grub_uint16_t const max_blocks = NVME_PAGE_SIZE / ns->block_size; ++ grub_uint16_t blocks = count < max_blocks ? count : max_blocks; ++ ++ if (write) ++ grub_memcpy(nvme_dma_buffer, buf, blocks * ns->block_size); ++ ++ int res = nvme_io_xfer(ns, lba, nvme_dma_buffer, NULL, blocks, write); ++ ++ if (!write && res >= 0) ++ grub_memcpy(buf, nvme_dma_buffer, res * ns->block_size); ++ ++ return res; ++} ++ ++#define NVME_MAX_PRPL_ENTRIES 15 /* Allows requests up to 64kb */ ++ ++// Transfer data using page list (if applicable) ++static int ++nvme_prpl_xfer(struct nvme_namespace *ns, grub_uint64_t lba, void *buf, grub_uint16_t count, ++ int write) ++{ ++ grub_uint32_t base = (long)buf; ++ grub_int32_t size; ++ ++ if (count > ns->max_req_size) ++ count = ns->max_req_size; ++ ++ size = count * ns->block_size; ++ /* Special case for transfers that fit into PRP1, but are unaligned */ ++ if (((size + (base & ~NVME_PAGE_MASK)) <= NVME_PAGE_SIZE)) ++ goto single; ++ ++ /* Every request has to be page aligned */ ++ if (base & ~NVME_PAGE_MASK) ++ goto bounce; ++ ++ /* Make sure a full block fits into the last chunk */ ++ if (size & (ns->block_size - 1ULL)) ++ goto bounce; ++ ++ /* Build PRP list if we need to describe more than 2 pages */ ++ if ((ns->block_size * count) > (NVME_PAGE_SIZE * 2)) { ++ grub_uint32_t prpl_len = 0; ++ grub_uint64_t *prpl = nvme_dma_buffer; ++ int first_page = 1; ++ for (; size > 0; base += NVME_PAGE_SIZE, size -= NVME_PAGE_SIZE) { ++ if (first_page) { ++ /* First page is special */ ++ first_page = 0; ++ continue; ++ } ++ if (prpl_len >= NVME_MAX_PRPL_ENTRIES) ++ goto bounce; ++ prpl[prpl_len++] = base; ++ } ++ return nvme_io_xfer(ns, lba, buf, prpl, count, write); ++ } ++ ++ /* Directly embed the 2nd page if we only need 2 pages */ ++ if ((ns->block_size * count) > NVME_PAGE_SIZE) ++ return nvme_io_xfer(ns, lba, buf, (char *) buf + NVME_PAGE_SIZE, count, write); ++ ++single: ++ /* One page is enough, don't expose anything else */ ++ return nvme_io_xfer(ns, lba, buf, NULL, count, write); ++ ++bounce: ++ /* Use bounce buffer to make transfer */ ++ return nvme_bounce_xfer(ns, lba, buf, count, write); ++} ++ ++static int ++nvme_create_io_queues(struct nvme_ctrl *ctrl) ++{ ++ if (nvme_create_io_cq(ctrl, &ctrl->io_cq, 3)) ++ goto err; ++ ++ if (nvme_create_io_sq(ctrl, &ctrl->io_sq, 2, &ctrl->io_cq)) ++ goto err_free_cq; ++ ++ return 0; ++ ++ err_free_cq: ++ nvme_destroy_cq(&ctrl->io_cq); ++ err: ++ return -1; ++} ++ ++/* Waits for CSTS.RDY to match rdy. Returns 0 on success. */ ++static int ++nvme_wait_csts_rdy(struct nvme_ctrl *ctrl, unsigned rdy) ++{ ++ // grub_uint32_t const max_to = 500 /* ms */ * ((ctrl->reg->cap >> 24) & 0xFFU); ++ // grub_uint32_t to = timer_calc(max_to); ++ grub_uint32_t csts; ++ ++ while (rdy != ((csts = ctrl->reg->csts) & NVME_CSTS_RDY)) { ++ // FIXME ++ //yield(); ++ ++ if (csts & NVME_CSTS_FATAL) { ++ grub_dprintf("nvme", "NVMe fatal error during controller shutdown\n"); ++ return -1; ++ } ++ ++ /* ++ if (timer_check(to)) { ++ warn_timeout(); ++ return -1; ++ }*/ ++ } ++ ++ return 0; ++} ++ ++/* Returns 0 on success. */ ++static int grub_nvme_controller_enable(struct nvme_ctrl *ctrl) ++{ ++ grub_pci_address_t addr; ++ int rc; ++ ++ addr = grub_pci_make_address (ctrl->pci, GRUB_PCI_REG_COMMAND); ++ grub_pci_write_word (addr, grub_pci_read_word (addr) | GRUB_PCI_COMMAND_BUS_MASTER); ++ ++ /* Turn the controller off. */ ++ ctrl->reg->cc = 0; ++ if (nvme_wait_csts_rdy(ctrl, 0)) { ++ grub_dprintf("nvme", "NVMe fatal error during controller shutdown\n"); ++ return -1; ++ } ++ ++ ctrl->doorbell_stride = 4U << ((ctrl->reg->cap >> 32) & 0xF); ++ ++ rc = nvme_init_cq(ctrl, &ctrl->admin_cq, 1, ++ NVME_PAGE_SIZE / sizeof(struct nvme_cqe)); ++ if (rc) { ++ return -1; ++ } ++ ++ rc = nvme_init_sq(ctrl, &ctrl->admin_sq, 0, ++ NVME_PAGE_SIZE / sizeof(struct nvme_sqe), &ctrl->admin_cq); ++ if (rc) { ++ goto err_destroy_admin_cq; ++ } ++ ++ ctrl->reg->aqa = ctrl->admin_cq.common.mask << 16 ++ | ctrl->admin_sq.common.mask; ++ ++ ctrl->reg->asq = (grub_uint32_t)ctrl->admin_sq.sqe; ++ ctrl->reg->acq = (grub_uint32_t)ctrl->admin_cq.cqe; ++ ++ grub_dprintf("nvme", " admin submission queue: %p\n", ctrl->admin_sq.sqe); ++ grub_dprintf("nvme", " admin completion queue: %p\n", ctrl->admin_cq.cqe); ++ ++ ctrl->reg->cc = NVME_CC_EN | (NVME_CQE_SIZE_LOG << 20) ++ | (NVME_SQE_SIZE_LOG << 16 /* IOSQES */); ++ ++ if (nvme_wait_csts_rdy(ctrl, 1)) { ++ grub_dprintf("nvme", "NVMe fatal error while enabling controller\n"); ++ goto err_destroy_admin_sq; ++ } ++ ++ /* The admin queue is set up and the controller is ready. Let's figure out ++ what namespaces we have. */ ++ ++ struct nvme_identify_ctrl *identify = nvme_admin_identify_ctrl(ctrl); ++ ++ if (!identify) { ++ grub_dprintf("nvme", "NVMe couldn't identify controller.\n"); ++ goto err_destroy_admin_sq; ++ } ++ ++ grub_dprintf("nvme", "NVMe has %u namespace%s.\n", ++ identify->nn, (identify->nn == 1) ? "" : "s"); ++ ++ ctrl->ns_count = identify->nn; ++ grub_uint8_t mdts = identify->mdts; ++ grub_free(identify); ++ ++ if ((ctrl->ns_count == 0) || nvme_create_io_queues(ctrl)) { ++ /* No point to continue, if the controller says it doesn't have ++ namespaces or we couldn't create I/O queues. */ ++ goto err_destroy_admin_sq; ++ } ++ ++ /* Give the controller a global number */ ++ ctrl->ctrlnum = grub_nvme_ctrlcnt++; ++ ++ /* Populate namespace IDs */ ++ for (grub_uint32_t ns_idx = 0; ns_idx < ctrl->ns_count; ns_idx++) { ++ nvme_probe_ns(ctrl, ns_idx, mdts); ++ } ++ ++ grub_dprintf("nvme", "NVMe initialization complete!\n"); ++ return 0; ++ ++ err_destroy_admin_sq: ++ nvme_destroy_sq(&ctrl->admin_sq); ++ err_destroy_admin_cq: ++ nvme_destroy_cq(&ctrl->admin_cq); ++ return -1; ++} ++ ++static int grub_nvme_pci_probe(grub_pci_device_t dev, grub_pci_id_t pciid __attribute__ ((unused)), void *data __attribute__ ((unused))) ++{ ++ grub_pci_address_t addr; ++ grub_uint32_t class, bar, version; ++ struct nvme_reg volatile *reg; ++ ++ class = grub_pci_read (grub_pci_make_address (dev, GRUB_PCI_REG_CLASS)); ++ if (class >> 16 != 0x0108) ++ return 0; ++ if ((class >> 8 & 0xff) != 2) { /* as of NVM 1.0e */ ++ grub_dprintf("nvme", "Found incompatble NVMe: prog-if=%02x\n", class >> 8 & 0xff); ++ return 0; ++ } ++ ++ bar = grub_pci_read (grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0)); ++ reg = grub_pci_device_map_range (dev, bar & GRUB_PCI_ADDR_MEM_MASK, sizeof (*reg)); ++ ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND); ++ grub_pci_write_word (addr, grub_pci_read_word (addr) | GRUB_PCI_COMMAND_MEM_ENABLED); ++ ++ version = reg->vs; ++ grub_dprintf("nvme", "Found NVMe controller with version %u.%u.%u.\n", version >> 16, (version >> 8) & 0xFF, version & 0xFF); ++ grub_dprintf("nvme", " Capabilities %016llx\n", reg->cap); ++ ++ if (~reg->cap & NVME_CAP_CSS_NVME) { ++ grub_dprintf("nvme", "Controller doesn't speak NVMe command set. Skipping.\n"); ++ goto err; ++ } ++ ++ struct nvme_ctrl *ctrl = grub_malloc(sizeof(*ctrl)); ++ if (!ctrl) ++ goto err; ++ ++ grub_memset(ctrl, 0, sizeof(*ctrl)); ++ ++ ctrl->reg = reg; ++ ctrl->pci = dev; ++ ++ if (grub_nvme_controller_enable(ctrl)) ++ goto err_free_ctrl; ++ ++ return 0; ++ ++ err_free_ctrl: ++ grub_free(ctrl); ++ err: ++ grub_dprintf("nvme", "Failed to enable NVMe controller.\n"); ++ return 0; ++} ++ ++static int ++grub_nvme_iterate (grub_disk_dev_iterate_hook_t hook, void *hook_data, grub_disk_pull_t pull) ++{ ++ struct nvme_namespace *ns; ++ ++ if (pull != GRUB_DISK_PULL_NONE) ++ return 0; ++ ++ FOR_LIST_ELEMENTS(ns, grub_nvme_namespaces) ++ if (hook (ns->devname, hook_data)) ++ return 1; ++ ++ return 0; ++} ++ ++static grub_err_t ++grub_nvme_open (const char *name __attribute ((unused)), grub_disk_t disk __attribute ((unused))) ++{ ++ struct nvme_namespace *ns; ++ ++ FOR_LIST_ELEMENTS(ns, grub_nvme_namespaces) ++ if (grub_strcmp (ns->devname, name) == 0) ++ break; ++ ++ if (! ns) ++ return grub_error (GRUB_ERR_UNKNOWN_DEVICE, "can't open device"); ++ ++ disk->total_sectors = ns->lba_count; ++ disk->max_agglomerate = ns->max_req_size; ++ ++ disk->id = ns->nsnum; /* global id of the namespace */ ++ ++ disk->data = ns; ++ ++ return 0; ++} ++ ++static grub_err_t ++nvme_readwrite(struct nvme_namespace *ns, grub_disk_addr_t sector, grub_size_t num_sectors, char *buf, int write) ++{ ++ for (int i = 0; i < num_sectors;) { ++ grub_uint16_t blocks_remaining = num_sectors - i; ++ char *op_buf = buf + i * ns->block_size; ++ int blocks = nvme_prpl_xfer(ns, sector + i, op_buf, blocks_remaining, write); ++ if (blocks < 0) ++ return GRUB_ERR_IO; ++ i += blocks; ++ } ++ return GRUB_ERR_NONE; ++} ++ ++static grub_err_t ++grub_nvme_read (grub_disk_t disk, grub_disk_addr_t sector, grub_size_t num_sectors, char *buf) ++{ ++ return nvme_readwrite((struct nvme_namespace *) disk->data, sector, num_sectors, buf, 0); ++} ++ ++static grub_err_t ++grub_nvme_write (grub_disk_t disk, grub_disk_addr_t sector, grub_size_t num_sectors, const char *buf) ++{ ++ return nvme_readwrite((struct nvme_namespace *) disk->data, sector, num_sectors, buf, 1); ++} ++ ++static struct grub_disk_dev grub_nvme_dev = ++ { ++ .name = "nvme", ++ .id = GRUB_DISK_DEVICE_NVME_ID, ++ .disk_iterate = grub_nvme_iterate, ++ .disk_open = grub_nvme_open, ++ .disk_read = grub_nvme_read, ++ .disk_write = grub_nvme_write, ++ .next = 0 ++ }; ++ ++GRUB_MOD_INIT(nvme) ++{ ++ grub_stop_disk_firmware (); ++ grub_pci_iterate (grub_nvme_pci_probe, NULL); ++ grub_disk_dev_register (&grub_nvme_dev); ++} ++ ++GRUB_MOD_FINI(nvme) ++{ ++ grub_disk_dev_unregister (&grub_nvme_dev); ++} +diff --git a/include/grub/disk.h b/include/grub/disk.h +index fbf23df7f..186e76f0b 100644 +--- a/include/grub/disk.h ++++ b/include/grub/disk.h +@@ -52,6 +52,7 @@ enum grub_disk_dev_id + GRUB_DISK_DEVICE_UBOOTDISK_ID, + GRUB_DISK_DEVICE_XEN, + GRUB_DISK_DEVICE_OBDISK_ID, ++ GRUB_DISK_DEVICE_NVME_ID + }; + + struct grub_disk; +-- +2.39.2 + diff --git a/config/grub/target.cfg b/config/grub/xhci/target.cfg index 2aaeb559..34ab2d24 100644 --- a/config/grub/target.cfg +++ b/config/grub/xhci/target.cfg @@ -1,3 +1,5 @@ +tree="xhci" +rev="8719cc2040368d43ab2de0b6e1b850b2c9cfc5b7" bootstrapargs="--gnulib-srcdir=gnulib/ --no-git" autoconfargs="--with-platform=coreboot --disable-werror" makeargs="FS_PAYLOAD_MODULES=\"\"" diff --git a/config/submodule/grub/default/gnulib/module.cfg b/config/submodule/grub/default/gnulib/module.cfg new file mode 100644 index 00000000..26c28561 --- /dev/null +++ b/config/submodule/grub/default/gnulib/module.cfg @@ -0,0 +1,3 @@ +subrepo="git://git.sv.gnu.org/gnulib" +subrepo_bkup="https://codeberg.org/libreboot/gnulib" +subrev="9f48fb992a3d7e96610c4ce8be969cff2d61a01b" diff --git a/config/submodule/grub/default/module.list b/config/submodule/grub/default/module.list new file mode 100644 index 00000000..0e57095c --- /dev/null +++ b/config/submodule/grub/default/module.list @@ -0,0 +1 @@ +gnulib diff --git a/config/submodule/grub/xhci/gnulib/module.cfg b/config/submodule/grub/xhci/gnulib/module.cfg new file mode 100644 index 00000000..26c28561 --- /dev/null +++ b/config/submodule/grub/xhci/gnulib/module.cfg @@ -0,0 +1,3 @@ +subrepo="git://git.sv.gnu.org/gnulib" +subrepo_bkup="https://codeberg.org/libreboot/gnulib" +subrev="9f48fb992a3d7e96610c4ce8be969cff2d61a01b" diff --git a/config/submodule/grub/xhci/module.list b/config/submodule/grub/xhci/module.list new file mode 100644 index 00000000..0e57095c --- /dev/null +++ b/config/submodule/grub/xhci/module.list @@ -0,0 +1 @@ +gnulib diff --git a/include/git.sh b/include/git.sh index e7fe28b5..ec1ecdd3 100755 --- a/include/git.sh +++ b/include/git.sh @@ -103,17 +103,17 @@ git_prep() prep_submodules() { - [ -f "$tmpgit/.gitmodules" ] || return 0 - mdir="$PWD/config/submodule/$project" [ -n "$tree" ] && mdir="$mdir/$tree" if [ -f "$mdir/module.list" ]; then cat "$mdir/module.list" > "$tmpdir/modules" || \ $err "!cp $mdir/module.list $tmpdir/modules" - else + elif [ -f "$tmpgit/.gitmodules" ]; then git -C "$tmpgit" submodule status | awk '{print $2}' > \ "$tmpdir/modules" || $err "$mdir: cannot list submodules" + else + return 0 fi while read -r msrcdir; do diff --git a/include/lib.sh b/include/lib.sh index eff55511..44ec3623 100755 --- a/include/lib.sh +++ b/include/lib.sh @@ -11,10 +11,8 @@ cbdir="src/coreboot/default" cbcfgsdir="config/coreboot" ifdtool="cbutils/default/ifdtool" cbfstool="cbutils/default/cbfstool" -grubcfgsdir="config/grub" -layoutdir="/boot/grub/layouts" -. "$grubcfgsdir/modules.list" tmpgit="$PWD/tmp/gitclone" +grubdata="config/data/grub" err="err_" err_() diff --git a/script/roms b/script/roms index 1e596192..7e5e1be6 100755 --- a/script/roms +++ b/script/roms @@ -12,7 +12,6 @@ set -u -e seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin" grub_background="background1280x800.png" -grubelf="elf/grub/grub.elf" cfgsdir="config/coreboot" picosrc="src/pico-serprog" picosdk="src/pico-sdk" @@ -23,7 +22,7 @@ stm32src="src/stm32-vserprog" pv="payload_uboot payload_grub_withseabios payload_seabios payload_memtest t" pv="$pv payload_seabios_withgrub payload_seabios_grubonly payload_grub mt86bin" v="romdir cbrom initmode displaymode cbcfg targetdir tree keymaps release" -v="$v grub_timeout ubdir board grub_scan_disk uboot_config" +v="$v grub_timeout ubdir board grub_scan_disk uboot_config grubtree grubelf" eval "$(setvars "n" $pv serprog)" eval "$(setvars "" $v boards _displaymode _payload _keyboard all targets \ serprog_boards_dir _scandisk)" @@ -172,6 +171,9 @@ configure_target() [ -z "$_grub_scan_disk" ] && _grub_scan_disk="nvme ahci ata" grub_scan_disk="${_grub_scan_disk# }" + [ -n "$grubtree" ] || grubtree="default" + grubelf="elf/grub/$grubtree/payload/grub.elf" + [ -z "$tree" ] && $err "$board: tree not defined" [ "$payload_memtest" != "y" ] && payload_memtest="n" @@ -225,24 +227,14 @@ build_payloads() build_grub_payload() { - x_ mkdir -p elf/grub - - for keymapfile in config/grub/keymap/*.gkb; do + for keymapfile in "$grubdata/keymap/"*.gkb; do [ -f "$keymapfile" ] && keymaps="$keymaps $keymapfile" done - [ -z "$_keyboard" ] || [ -f "$grubcfgsdir/keymap/$_keyboard.gkb" ] || \ + [ -z "$_keyboard" ] || [ -f "$grubdata/keymap/$_keyboard.gkb" ] || \ $err "build_grub_payload: $_keyboard layout not defined" - [ -n "$_keyboard" ] && keymaps="$grubcfgsdir/keymap/$_keyboard.gkb" - [ -f "$grubelf" ] && return 0 - [ -f "src/grub/grub-mkstandalone" ] || x_ ./update trees -b grub - - ./src/grub/grub-mkstandalone --grub-mkimage="src/grub/grub-mkimage" \ - -O i386-coreboot -o "elf/grub/grub.elf" -d "src/grub/grub-core/" \ - --fonts= --themes= --locales= --modules="$grub_modules" \ - --install-modules="$grub_install_modules" \ - "/boot/grub/grub.cfg=$grubcfgsdir/config/grub_memdisk.cfg" \ - "/boot/grub/grub_default.cfg=$grubcfgsdir/config/grub.cfg" || \ - $err "could not generate grub.elf" + [ -n "$_keyboard" ] && keymaps="$grubdata/keymap/$_keyboard.gkb" + + [ -f "$grubelf" ] || x_ ./update trees -b grub $grubtree; return 0 } build_uboot_payload() @@ -343,7 +335,7 @@ build_grub_roms() # we only need insert background.png once, for each coreboot config: if [ "$displaymode" = "vesafb" ] || \ [ "$displaymode" = "corebootfb" ]; then - backgroundfile="config/grub/background/$grub_background" + backgroundfile="$grubdata/background/$grub_background" "$cbfstool" "$tmprom" add -f "$backgroundfile" -n \ background.png -t raw || $err "!bg, $backgroundfile" fi @@ -376,7 +368,7 @@ build_grub_roms() if [ "$payload_seabios_withgrub" = "y" ] && \ [ "$payload1" != "grub" ]; then x_ "$cbfstool" "$tmpgrubrom" add \ - -f "config/grub/bootorder" -n bootorder -t raw + -f "$grubdata/bootorder" -n bootorder -t raw x_ cprom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom" if [ "$payload_seabios_grubonly" = "y" ]; then x_ "$cbfstool" "$tmpgrubrom" add-int -i 0 \ diff --git a/script/trees b/script/trees index 80037bd8..1075b220 100755 --- a/script/trees +++ b/script/trees @@ -178,9 +178,12 @@ check_config() handle_makefile() { - x_ make clean -C "$cdir" && x_ cp "$config" "$cdir/.config" - [ -n "$mode" ] || make -C "$cdir" silentoldconfig || \ - make -C "$cdir" oldconfig || : + [ "$project" = "grub" ] && [ "${mode%config}" != "$mode" ] && return 0 + + check_makefile "$cdir" && x_ make clean -C "$cdir" + x_ cp "$config" "$cdir/.config" + [ -n "$mode" ] || [ "$project" = "grub" ] || make -C "$cdir" \ + silentoldconfig || make -C "$cdir" oldconfig || : run_make_command || $err "handle_makefile $cdir: no makefile!" @@ -204,6 +207,8 @@ run_make_command() make -C "$cdir" $mode -j$threads $makeargs || $err "!mk $cdir $mode" + [ "$project" = "grub" ] && [ -z "$mode" ] && mkpayload_grub + [ "$mode" != "clean" ] && return 0 make -C "$cdir" distclean 2>/dev/null || : } @@ -232,6 +237,25 @@ check_makefile() [ -f "$1/GNUmakefile" ] || return 1; return 0 } +mkpayload_grub() +{ + [ -f "$grubdata/module/$tree" ] || $err "$tree: grub modules missing" + x_ rm -f "$cdir/grub.elf" + + eval "$(setvars "" grub_modules grub_install_modules)" + + . "$grubdata/module/$tree" || $err "$tree: !source grub modules" + + [ -z "$grub_install_modules" ] && $err "$tree: install modules unset" + [ -z "$grub_modules" ] && $err "$tree: modules unset" + + "${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \ + -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \ + --fonts= --themes= --locales= --modules="$grub_modules" \ + --install-modules="$grub_install_modules" \ + "/boot/grub/grub.cfg=${cdir}/.config" || $err "$tree: !mkgrub" +} + copy_elf() { while read -r f; do |
