diff options
| author | Leah Rowe <leah@libreboot.org> | 2024-06-01 23:01:30 +0100 |
|---|---|---|
| committer | Leah Rowe <leah@libreboot.org> | 2024-06-02 19:58:50 +0100 |
| commit | 429e91f90894d30bc2c6e165d6f2a743c61b76f3 (patch) | |
| tree | 67b347fab1b896ab95c38303b5e124eab16ece62 | |
| parent | 9daf7f05f14c74189daa820eae0127641c4d11d4 (diff) | |
make GRUB multi-tree and re-add xhci patches
Re-add xHCI only on haswell and broadwell machines, where
they are needed. Otherwise, keep the same GRUB code.
The xHCI patches were removed because they caused issues
on Sandybridge-based Dell Latitude laptops. See:
https://codeberg.org/libreboot/lbmk/issues/216
The issue was not reported elsewhere, including on the
Haswell/Broadwell hardware where they are needed, but the
build system could only build one version of GRUB.
The older machines do not need xHCI patches, because they
either do not have xHCI patches, or work (in GRUB) because
they're in EHCI mode when running the payload.
So, the problem is that we need the xHCI patches for GRUB
on Haswell/Broadwell hardware, but the patches break
Sandybridge hardware, and we only had the one build of GRUB.
To mitigate this problem, the build system now supports
building multiple revisions of GRUB, with different patches,
and each given coreboot target can say which GRUB tree to use
by setting this in target.cfg:
grubtree="xhci"
In the above example, the "xhci" tree would be used. Some
generic GRUB config has been moved to config/data/grub/
and config/grub/ now looks like config/coreboot/ - also,
the grub.cfg file (named "payload" in each tree) is copied
to the GRUB source tree as ".config", then added to GRUB's
memdisk in the same way, as grub.cfg.
Several other design changes had to be made because of this:
* grub.cfg in memdisk no longer automatically jumps to one
in CBFS, but now shows a menuentry for it if available
* Certain commands in script/trees are disabled for GRUB,
such as *config make commands.
* gnulib is now defined in config/submodule/grub/, instead
of config/git/grub - and this mitigates an existing bug
where downloading gnulib first would make grub no longer
possible to download in lbmk.
The coreboot option CONFIG_FINALIZE_USB_ROUTE_XHCI has been
re-enabled on: Dell OptiPlex 9020 MT, Dell OptiPlex 9020 SFF,
Lenovo ThinkPad T440p and Lenovo ThinkPad W541 - now USB should
work again in GRUB.
The GRUB payload has been re-enabled on HP EliteBook 820 G2.
This change will enable per-board GRUB optimisation in the
future. For example, we hardcode what partitions and LVMs
GRUB scans because * is slow on ICH7-based machines, due
to GRUB's design. On other machines, * is reasonably fast,
for automatically enumerating the list of devices for boot.
Use of * (and other wildcards) could enable our GRUB payload
to automatically boot more distros, with minimal fuss. This
can be done at a later date, in subsequent revisions.
Signed-off-by: Leah Rowe <leah@libreboot.org>
86 files changed, 8431 insertions, 756 deletions
diff --git a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb index 7afbe427..509e784e 100644 --- a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_corebootfb @@ -288,7 +288,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode index 3609c5a8..428bed87 100644 --- a/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/dell9020mt_nri_12mb/config/libgfxinit_txtmode @@ -286,7 +286,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020mt_nri_12mb/target.cfg b/config/coreboot/dell9020mt_nri_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/dell9020mt_nri_12mb/target.cfg +++ b/config/coreboot/dell9020mt_nri_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb index e2c82603..ac1d9f16 100644 --- a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_corebootfb @@ -288,7 +288,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode index 4fe0c52c..179af9cc 100644 --- a/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/dell9020sff_nri_12mb/config/libgfxinit_txtmode @@ -286,7 +286,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/dell9020sff_nri_12mb/target.cfg b/config/coreboot/dell9020sff_nri_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/dell9020sff_nri_12mb/target.cfg +++ b/config/coreboot/dell9020sff_nri_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/hp820g2_12mb/target.cfg b/config/coreboot/hp820g2_12mb/target.cfg index c54e8748..ada696cf 100644 --- a/config/coreboot/hp820g2_12mb/target.cfg +++ b/config/coreboot/hp820g2_12mb/target.cfg @@ -1,6 +1,8 @@ tree="default" xarch="i386-elf" payload_seabios="y" +payload_seabios_withgrub="y" payload_memtest="y" release="n" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb index ab3c464b..dd614202 100644 --- a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_corebootfb @@ -325,7 +325,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode index b6a9afd1..a0dce901 100644 --- a/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/t440plibremrc_12mb/config/libgfxinit_txtmode @@ -323,7 +323,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/t440plibremrc_12mb/target.cfg b/config/coreboot/t440plibremrc_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/t440plibremrc_12mb/target.cfg +++ b/config/coreboot/t440plibremrc_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/coreboot/w541_12mb/config/libgfxinit_corebootfb b/config/coreboot/w541_12mb/config/libgfxinit_corebootfb index 7db59d7b..ae155585 100644 --- a/config/coreboot/w541_12mb/config/libgfxinit_corebootfb +++ b/config/coreboot/w541_12mb/config/libgfxinit_corebootfb @@ -325,7 +325,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/w541_12mb/config/libgfxinit_txtmode b/config/coreboot/w541_12mb/config/libgfxinit_txtmode index a4a33d25..9a891434 100644 --- a/config/coreboot/w541_12mb/config/libgfxinit_txtmode +++ b/config/coreboot/w541_12mb/config/libgfxinit_txtmode @@ -323,7 +323,7 @@ CONFIG_USE_NATIVE_RAMINIT=y # CONFIG_PCIEXP_HOTPLUG is not set CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y CONFIG_SOUTHBRIDGE_INTEL_LYNXPOINT=y -# CONFIG_FINALIZE_USB_ROUTE_XHCI is not set +CONFIG_FINALIZE_USB_ROUTE_XHCI=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RESET=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_RTC=y CONFIG_SOUTHBRIDGE_INTEL_COMMON_PMCLIB=y diff --git a/config/coreboot/w541_12mb/target.cfg b/config/coreboot/w541_12mb/target.cfg index 813ed915..b513e2b5 100644 --- a/config/coreboot/w541_12mb/target.cfg +++ b/config/coreboot/w541_12mb/target.cfg @@ -4,3 +4,4 @@ payload_seabios="y" payload_seabios_withgrub="y" payload_memtest="y" grub_scan_disk="nvme ahci" +grubtree="xhci" diff --git a/config/data/grub/background/COPYING b/config/data/grub/background/COPYING new file mode 100644 index 00000000..ba07806d --- /dev/null +++ b/config/data/grub/background/COPYING @@ -0,0 +1,4 @@ +The deer logo for Libreboot is copyright 2014 Marcus Moeller and released under +CC-0 1.0: https://creativecommons.org/publicdomain/zero/1.0/legalcode +The grey backgrounds with it were made by Leah Rowe in 2016, also CC-0 1.0; the +same applies to the purple version which was made in 2023. diff --git a/config/grub/background/background1024x768.png b/config/data/grub/background/background1024x768.png Binary files differindex 181909db..181909db 100644 --- a/config/grub/background/background1024x768.png +++ b/config/data/grub/background/background1024x768.png diff --git a/config/grub/background/background1280x800.png b/config/data/grub/background/background1280x800.png Binary files differindex f563ea63..f563ea63 100644 --- a/config/grub/background/background1280x800.png +++ b/config/data/grub/background/background1280x800.png diff --git a/config/grub/bootorder b/config/data/grub/bootorder index b33e1295..b33e1295 100644 --- a/config/grub/bootorder +++ b/config/data/grub/bootorder diff --git a/config/grub/keymap/colemak.gkb b/config/data/grub/keymap/colemak.gkb Binary files differindex d357816b..d357816b 100644 --- a/config/grub/keymap/colemak.gkb +++ b/config/data/grub/keymap/colemak.gkb diff --git a/config/grub/keymap/deqwertz.gkb b/config/data/grub/keymap/deqwertz.gkb Binary files differindex 4928d026..4928d026 100644 --- a/config/grub/keymap/deqwertz.gkb +++ b/config/data/grub/keymap/deqwertz.gkb diff --git a/config/grub/keymap/esqwerty.gkb b/config/data/grub/keymap/esqwerty.gkb Binary files differindex 6ce76330..6ce76330 100644 --- a/config/grub/keymap/esqwerty.gkb +++ b/config/data/grub/keymap/esqwerty.gkb diff --git a/config/grub/keymap/frazerty.gkb b/config/data/grub/keymap/frazerty.gkb Binary files differindex f8455154..f8455154 100644 --- a/config/grub/keymap/frazerty.gkb +++ b/config/data/grub/keymap/frazerty.gkb diff --git a/config/grub/keymap/frdvbepo.gkb b/config/data/grub/keymap/frdvbepo.gkb Binary files differindex 20702607..20702607 100644 --- a/config/grub/keymap/frdvbepo.gkb +++ b/config/data/grub/keymap/frdvbepo.gkb diff --git a/config/grub/keymap/itqwerty.gkb b/config/data/grub/keymap/itqwerty.gkb Binary files differindex db10a54c..db10a54c 100644 --- a/config/grub/keymap/itqwerty.gkb +++ b/config/data/grub/keymap/itqwerty.gkb diff --git a/config/grub/keymap/ptqwerty.gkb b/config/data/grub/keymap/ptqwerty.gkb Binary files differindex 5d9b453e..5d9b453e 100644 --- a/config/grub/keymap/ptqwerty.gkb +++ b/config/data/grub/keymap/ptqwerty.gkb diff --git a/config/grub/keymap/svenska.gkb b/config/data/grub/keymap/svenska.gkb Binary files differindex 75ca762d..75ca762d 100644 --- a/config/grub/keymap/svenska.gkb +++ b/config/data/grub/keymap/svenska.gkb diff --git a/config/grub/keymap/trqwerty.gkb b/config/data/grub/keymap/trqwerty.gkb Binary files differindex 452100d5..452100d5 100644 --- a/config/grub/keymap/trqwerty.gkb +++ b/config/data/grub/keymap/trqwerty.gkb diff --git a/config/grub/keymap/ukdvorak.gkb b/config/data/grub/keymap/ukdvorak.gkb Binary files differindex 76b9e380..76b9e380 100644 --- a/config/grub/keymap/ukdvorak.gkb +++ b/config/data/grub/keymap/ukdvorak.gkb diff --git a/config/grub/keymap/ukqwerty.gkb b/config/data/grub/keymap/ukqwerty.gkb Binary files differindex 5f513d85..5f513d85 100644 --- a/config/grub/keymap/ukqwerty.gkb +++ b/config/data/grub/keymap/ukqwerty.gkb diff --git a/config/grub/keymap/usdvorak.gkb b/config/data/grub/keymap/usdvorak.gkb Binary files differindex ef88232c..ef88232c 100644 --- a/config/grub/keymap/usdvorak.gkb +++ b/config/data/grub/keymap/usdvorak.gkb diff --git a/config/grub/keymap/usqwerty.gkb b/config/data/grub/keymap/usqwerty.gkb Binary files differindex 0ea130f2..0ea130f2 100644 --- a/config/grub/keymap/usqwerty.gkb +++ b/config/data/grub/keymap/usqwerty.gkb diff --git a/config/grub/modules.list b/config/data/grub/module/default index 381451b9..503c61c8 100644..100755 --- a/config/grub/modules.list +++ b/config/data/grub/module/default @@ -9,7 +9,6 @@ usbserial_pl2303 \ usbserial_usbdebug \ video_colors \ " - # Modules (and always loaded) grub_modules=" \ acpi \ diff --git a/config/data/grub/module/xhci b/config/data/grub/module/xhci new file mode 100755 index 00000000..8bf80bfe --- /dev/null +++ b/config/data/grub/module/xhci @@ -0,0 +1,157 @@ +# Install modules (installed, but not automatically loaded) +grub_install_modules=" \ +hexdump \ +newc \ +odc \ +usbserial_common \ +usbserial_ftdi \ +usbserial_pl2303 \ +usbserial_usbdebug \ +video_colors \ +" +# Modules (and always loaded) +grub_modules=" \ +acpi \ +ahci \ +at_keyboard \ +all_video \ +ata \ +bitmap \ +bitmap_scale \ +boot \ +bsd \ +btrfs \ +cat \ +cbfs \ +cbls \ +cbmemc \ +cbtime \ +chain \ +configfile \ +cpio \ +cpio_be \ +crc64 \ +crypto \ +cryptodisk \ +diskfilter \ +echo \ +xhci \ +ehci \ +eval \ +exfat \ +elf \ +ext2 \ +fat \ +f2fs \ +gcry_arcfour \ +gcry_blowfish \ +gcry_camellia \ +gcry_cast5 \ +gcry_crc \ +gcry_des \ +gcry_dsa \ +gcry_idea \ +gcry_md4 \ +gcry_md5 \ +gcry_rfc2268 \ +gcry_rijndael \ +gcry_rmd160 \ +gcry_rsa \ +gcry_seed \ +gcry_serpent \ +gcry_sha1 \ +gcry_sha256 \ +gcry_sha512 \ +gcry_tiger \ +gcry_twofish \ +gcry_whirlpool \ +geli \ +gfxmenu \ +gfxterm_background \ +gfxterm_menu \ +gzio \ +hashsum \ +halt \ +help \ +iorw \ +iso9660 \ +jpeg \ +json \ +keylayouts \ +keystatus \ +linux \ +linux16 \ +loadenv \ +loopback \ +ls \ +lsacpi \ +lsmmap \ +lspci \ +luks \ +luks2 \ +argon2 \ +lvm \ +lzopio \ +mdraid09 \ +mdraid09_be \ +mdraid1x \ +memdisk \ +memrw \ +minicmd \ +mmap \ +multiboot \ +multiboot2 \ +nativedisk \ +normal \ +ntfs \ +nvme \ +ohci \ +part_bsd \ +part_dfly \ +part_gpt \ +part_msdos \ +password \ +password_pbkdf2 \ +pata \ +pbkdf2 \ +pcidump \ +pgp \ +play \ +png \ +procfs \ +raid5rec \ +raid6rec \ +read \ +reboot \ +regexp \ +romfs \ +scsi \ +search \ +search_fs_file \ +search_fs_uuid \ +search_label \ +serial \ +syslinuxcfg \ +setjmp \ +setpci \ +spkmodem \ +squash4 \ +sleep \ +tar \ +test \ +true \ +uhci \ +udf \ +ufs1 \ +ufs1_be \ +ufs2 \ +usb \ +usb_keyboard \ +usbms \ +xfs \ +xzio \ +zfs \ +zfscrypt \ +zfsinfo \ +zstd \ +" diff --git a/config/git/grub b/config/git/grub index b52fa0fb..21634cd6 100644 --- a/config/git/grub +++ b/config/git/grub @@ -1,14 +1,6 @@ {grub}{ - rev: 8719cc2040368d43ab2de0b6e1b850b2c9cfc5b7 - loc: grub + rev: HEAD + loc: grub/grub url: git://git.savannah.gnu.org/grub.git bkup_url: https://codeberg.org/libreboot/grub - depend: gnulib -} - -{gnulib}{ - rev: 9f48fb992a3d7e96610c4ce8be969cff2d61a01b - loc: grub/gnulib - url: git://git.sv.gnu.org/gnulib - bkup_url: https://codeberg.org/libreboot/gnulib } diff --git a/config/grub/background/COPYING b/config/grub/background/COPYING deleted file mode 100644 index 9a5f81c6..00000000 --- a/config/grub/background/COPYING +++ /dev/null @@ -1,3 +0,0 @@ -The deer logo for Libreboot is copyright 2014 Marcus Moeller and released under -CC-0: https://creativecommons.org/publicdomain/zero/1.0/legalcode -The grey backgrounds with it were made by Leah Rowe in 2016, also CC-0 diff --git a/config/grub/build.list b/config/grub/build.list new file mode 100644 index 00000000..5b891e5a --- /dev/null +++ b/config/grub/build.list @@ -0,0 +1 @@ +grub.elf diff --git a/config/grub/config/AUTHORS b/config/grub/config/AUTHORS deleted file mode 100644 index 542739ce..00000000 --- a/config/grub/config/AUTHORS +++ /dev/null @@ -1,2 +0,0 @@ -Copyright (C) 2014, 2015, 2016, 2020, 2021, 2023 Leah Rowe <leah@libreboot.org> -Copyright (C) 2015 Klemens Nanni <contact@autoboot.org> diff --git a/config/grub/config/COPYING b/config/grub/config/COPYING deleted file mode 100644 index f74bc54d..00000000 --- a/config/grub/config/COPYING +++ /dev/null @@ -1,695 +0,0 @@ -# GRUB configuration files under resources/grub/config/ - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -# See AUTHORS for copyright holder information. - -# Full terms of GPLv3 below, taken from https://www.gnu.org/licenses/licenses.html -________________________________________________________________________ - - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - <program> Copyright (C) <year> <name of author> - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -<http://www.gnu.org/licenses/>. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/config/grub/config/grub_memdisk.cfg b/config/grub/config/grub_memdisk.cfg deleted file mode 100644 index 18d5d535..00000000 --- a/config/grub/config/grub_memdisk.cfg +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-3.0-or-later - -set prefix=(memdisk)/boot/grub - -if [ -f (cbfsdisk)/grub.cfg ]; then - source (cbfsdisk)/grub.cfg -else - source (memdisk)/boot/grub/grub_default.cfg -fi diff --git a/config/grub/config/grub.cfg b/config/grub/default/config/payload index 7adee869..f81d5930 100644 --- a/config/grub/config/grub.cfg +++ b/config/grub/default/config/payload @@ -1,4 +1,6 @@ # SPDX-License-Identifier: GPL-3.0-or-later +# Copyright (C) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> +# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org> set prefix=(memdisk)/boot/grub @@ -215,6 +217,14 @@ menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE [d]' --hotkey= menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe [e]' --hotkey='e' { search_bootcfg nvme } +if [ -f (cbfsdisk)/grub.cfg ]; then +menuentry 'Load configuration (grub.cfg) in CBFS [t]' --hotkey='t' { + set root='(cbfsdisk)' + if [ -f /grub.cfg ]; then + configfile /grub.cfg + fi +} +fi if [ -f (cbfsdisk)/grubtest.cfg ]; then menuentry 'Load test configuration (grubtest.cfg) inside of CBFS [t]' --hotkey='t' { set root='(cbfsdisk)' diff --git a/config/grub/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch b/config/grub/default/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch index 183f5a91..183f5a91 100644 --- a/config/grub/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch +++ b/config/grub/default/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch diff --git a/config/grub/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch b/config/grub/default/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch index 6ff97979..6ff97979 100644 --- a/config/grub/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch +++ b/config/grub/default/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch diff --git a/config/grub/patches/0002-luks2/0003-Add-CC0-license.patch b/config/grub/default/patches/0002-luks2/0003-Add-CC0-license.patch index dc9060c3..dc9060c3 100644 --- a/config/grub/patches/0002-luks2/0003-Add-CC0-license.patch +++ b/config/grub/default/patches/0002-luks2/0003-Add-CC0-license.patch diff --git a/config/grub/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch b/config/grub/default/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch index be875e67..be875e67 100644 --- a/config/grub/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch +++ b/config/grub/default/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch diff --git a/config/grub/patches/0002-luks2/0005-Add-Argon2-algorithm.patch b/config/grub/default/patches/0002-luks2/0005-Add-Argon2-algorithm.patch index 1c6b4f04..1c6b4f04 100644 --- a/config/grub/patches/0002-luks2/0005-Add-Argon2-algorithm.patch +++ b/config/grub/default/patches/0002-luks2/0005-Add-Argon2-algorithm.patch diff --git a/config/grub/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch b/config/grub/default/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch index 5d56bd61..5d56bd61 100644 --- a/config/grub/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch +++ b/config/grub/default/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch diff --git a/config/grub/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch b/config/grub/default/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch index f2e26fd4..f2e26fd4 100644 --- a/config/grub/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch +++ b/config/grub/default/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch diff --git a/config/grub/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch b/config/grub/default/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch index dc65b7a6..dc65b7a6 100644 --- a/config/grub/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch +++ b/config/grub/default/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch diff --git a/config/grub/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch b/config/grub/default/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch index 21e8630b..21e8630b 100644 --- a/config/grub/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch +++ b/config/grub/default/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch diff --git a/config/grub/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch b/config/grub/default/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch index fbef86a4..fbef86a4 100644 --- a/config/grub/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch +++ b/config/grub/default/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch diff --git a/config/grub/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch b/config/grub/default/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch index 25091d16..25091d16 100644 --- a/config/grub/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch +++ b/config/grub/default/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch diff --git a/config/grub/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch b/config/grub/default/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch index f4cf939e..f4cf939e 100644 --- a/config/grub/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch +++ b/config/grub/default/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch diff --git a/config/grub/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch b/config/grub/default/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch index 25221c9c..25221c9c 100644 --- a/config/grub/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch +++ b/config/grub/default/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch diff --git a/config/grub/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch b/config/grub/default/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch index 4345ebae..4345ebae 100644 --- a/config/grub/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch +++ b/config/grub/default/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch diff --git a/config/grub/default/target.cfg b/config/grub/default/target.cfg new file mode 100644 index 00000000..fa5735e9 --- /dev/null +++ b/config/grub/default/target.cfg @@ -0,0 +1,5 @@ +tree="default" +rev="8719cc2040368d43ab2de0b6e1b850b2c9cfc5b7" +bootstrapargs="--gnulib-srcdir=gnulib/ --no-git" +autoconfargs="--with-platform=coreboot --disable-werror" +makeargs="FS_PAYLOAD_MODULES=\"\"" diff --git a/config/grub/xhci/config/payload b/config/grub/xhci/config/payload new file mode 100644 index 00000000..0e16ecb6 --- /dev/null +++ b/config/grub/xhci/config/payload @@ -0,0 +1,290 @@ +# SPDX-License-Identifier: GPL-3.0-or-later +# Copyright (C) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> +# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org> + +set prefix=(memdisk)/boot/grub + +insmod at_keyboard +insmod usb_keyboard +insmod nativedisk +insmod xhci +insmod ehci +insmod ohci +insmod uhci +insmod usb +insmod usbms +insmod regexp + +terminal_input --append at_keyboard +terminal_input --append usb_keyboard +terminal_output --append cbmemc + +# User interface overrides wherever "keystatus" is supported +# Keep SHIFT key pressed before powering on to disable graphics +if keystatus --shift; then + terminal_output --append vga_text +else + gfxpayload=keep + terminal_output --append gfxterm + + if [ -f (cbfsdisk)/background.png ]; then + insmod png + background_image (cbfsdisk)/background.png + elif [ -f (cbfsdisk)/background.jpg ]; then + insmod jpeg + background_image (cbfsdisk)/background.jpg + fi +fi + +# Keep CTRL pressed to enable default serial terminal (COM1 or the like) +if keystatus --ctrl; then + serial + terminal_input --append serial + terminal_output --append serial +fi + +# Keep ALT pressed to enable spkmodem +if keystatus --alt; then + terminal_output --append spkmodem +fi + + +set default="0" +if [ -f (cbfsdisk)/timeout.cfg ]; then + source (cbfsdisk)/timeout.cfg +else + set timeout=5 +fi +set grub_scan_disk="nvme ahci ata" +if [ -f (cbfsdisk)/scan.cfg ]; then + source (cbfsdisk)/scan.cfg +fi + +if [ -f (cbfsdisk)/keymap.gkb ]; then + keymap (cbfsdisk)/keymap.gkb +fi + +function really_try_user_config { + set root="${1}" + + if [ -f /"${2}"/grub.cfg ]; then + unset superusers + configfile /"${2}"/grub.cfg + fi +} + +function try_user_config { + # The @/... entries are for cases where the BTRFS filesystem is being used + for dir in grub boot/grub @/grub @/boot/grub grub2 boot/grub2 @/grub2 @/boot/grub2 boot @/boot; do + really_try_user_config "${1}" "${dir}" + done + for dir in ubuntu debian redhat; do + really_try_user_config "${1}" "EFI/${dir}" + done +} +function search_grub { + echo -n "Attempting to load grub.cfg from '${1}' devices" + for i in 0 1 2 3 4 5 6 7 8; do + for part in 1 2 3 4 5 6 7 8 9 10 11 12; do + if [ "${1}" != "nvme" ]; then + try_user_config "(${1}${i},${part})" + else + # TODO: do we care about other namesapces + try_user_config "(nvme${i}n1,${part})" + fi + done + if [ "${1}" != "nvme" ]; then + # raw devices e.g. (ahci0) instead of (ahci0,1) + try_user_config "(${1}${i})" + else + # TODO: do we care about other namesapces + try_user_config "(nvme${i}n1)" + fi + done + echo # Insert newline +} + +function try_isolinux_config { + set root="${1}" + for dir in '' /boot /EFI /@ /@/boot; do + if [ -f "${dir}"/isolinux/isolinux.cfg ]; then + syslinux_configfile -i "${dir}"/isolinux/isolinux.cfg + elif [ -f "${dir}"/syslinux/syslinux.cfg ]; then + syslinux_configfile -s "${dir}"/syslinux/syslinux.cfg + elif [ -f "${dir}"/syslinux/extlinux.conf ]; then + syslinux_configfile -s "${dir}"/syslinux/extlinux.conf + elif [ -f "${dir}"/extlinux/extlinux.conf ]; then + syslinux_configfile -s "${dir}"/extlinux/extlinux.conf + fi + done +} +function search_isolinux { + echo "\nAttempting to parse iso/sys/extlinux config from '${1}' devices" + for i in 0 1 2 3 4 5 6 7 8; do + for part in 1 2 3 4 5 6 7 8 9 10 11 12; do + if [ "${1}" != "nvme" ]; then + try_isolinux_config "(${1}${i},${part})" + else + # TODO: see above + try_isolinux_config "(nvme${i}n1,${part})" + fi + done + if [ "${1}" != "nvme" ]; then + # raw devices e.g. (usb0) instead of (usb0,1) + try_isolinux_config "(${1}${i})" + else + # TODO: do we care about other namesapces + try_isolinux_config "(nvme${i}n1)" + fi + done + echo # Insert newline +} +function try_bootcfg { + try_user_config "${1}" + try_isolinux_config "${1}" +} +function search_bootcfg { + search_grub "${1}" + search_isolinux "${1}" +} +menuentry 'Load Operating System (incl. fully encrypted disks) [o]' --hotkey='o' { + + for grub_disk in ${grub_scan_disk}; do + search_bootcfg ${grub_disk} + done + + # grub device enumeration is very slow, so checks are hardcoded + + # TODO: add more strings, based on what distros set up when + # the user select auto-partitioning on those installers + lvmvol="lvm/grubcrypt-bootvol lvm/grubcrypt-rootvol" + + raidvol="md/0 md/1 md/2 md/3 md/4 md/5 md/6 md/7 md/8 md/9" + + # in practise, doing multiple redundant checks is perfectly fast and + # TODO: optimize grub itself, and use */? here for everything + + for vol in ${lvmvol} ${raidvol} ; do + try_bootcfg "${vol}" + done + + unset bootdev + for grub_disk in ${grub_scan_disk}; do + for i in 0 1 2 3 4 5 6 7 8; do + for part in 1 2 3 4 5 6 7 8 9 10 11 12; do + if [ "${grub_disk}" = "ahci" ]; then + bootdev="${bootdev} (ahci${i},${part})" + elif [ "${grub_disk}" = "ata" ]; then + bootdev="${bootdev} (ata${i},${part})" + elif [ "${grub_disk}" = "nvme" ]; then + # TODO: do we care about other namesapces + bootdev="${bootdev} (nvme${i}n1,${part})" + fi + done + done + done + + set pager=0 + echo -n "Attempting to unlock encrypted volumes" + for dev in ${bootdev} ${lvmvol} ${raidvol}; do + if cryptomount "${dev}" ; then break ; fi + done + set pager=1 + echo + + # after cryptomount, lvm volumes might be available + for vol in ${lvmvol}; do + try_bootcfg "${vol}" + done + + search_bootcfg crypto + + for vol in lvm/* ; do + try_bootcfg "${vol}" + done + + true # Prevent pager requiring to accept each line instead of whole screen +} + +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on USB [s]' --hotkey='s' { + search_bootcfg usb +} +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on AHCI [a]' --hotkey='a' { + search_bootcfg ahci +} +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE [d]' --hotkey='d' { + search_bootcfg ata +} +menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe [e]' --hotkey='e' { + search_bootcfg nvme +} +if [ -f (cbfsdisk)/grub.cfg ]; then +menuentry 'Load configuration (grub.cfg) in CBFS [t]' --hotkey='t' { + set root='(cbfsdisk)' + if [ -f /grub.cfg ]; then + configfile /grub.cfg + fi +} +fi +if [ -f (cbfsdisk)/grubtest.cfg ]; then +menuentry 'Load test configuration (grubtest.cfg) in CBFS [t]' --hotkey='t' { + set root='(cbfsdisk)' + if [ -f /grubtest.cfg ]; then + configfile /grubtest.cfg + fi +} +fi +if [ -f (cbfsdisk)/seabios.elf ]; then +menuentry 'Load SeaBIOS (payload) [b]' --hotkey='b' { + set root='cbfsdisk' + chainloader /seabios.elf +} +fi +if [ -f (cbfsdisk)/img/grub2 ]; then +menuentry 'Return to SeaBIOS [b]' --hotkey='b' { + set root='cbfsdisk' + chainloader /fallback/payload +} +fi +menuentry 'Poweroff [p]' --hotkey='p' { + halt +} +menuentry 'Reboot [r]' --hotkey='r' { + reboot +} +if [ -f (cbfsdisk)/img/memtest ]; then +menuentry 'Load MemTest86+ [m]' --hotkey='m' { + set root='cbfsdisk' + chainloader /img/memtest +} +fi + +submenu 'Other [z]' --hotkey='z' { + menuentry 'Enable default serial terminal [s]' --hotkey='s' { + serial + terminal_input --append serial + terminal_output --append serial + } + + menuentry 'Disable default serial terminal' { + terminal_input --remove serial + terminal_output --remove serial + } + + menuentry 'Enable gfxterm' { + terminal_output --append gfxterm + terminal_output --remove vga_text + } + menuentry 'Disable gfxterm [g]' --hotkey='g' { + terminal_output --remove gfxterm + terminal_output --append vga_text + } + + menuentry 'Enable spkmodem [a]' --hotkey='a' { + terminal_output --append spkmodem + } + + menuentry 'Disable spkmodem [z]' --hotkey='z' { + terminal_output --remove spkmodem + } +} diff --git a/config/grub/xhci/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch b/config/grub/xhci/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch new file mode 100644 index 00000000..183f5a91 --- /dev/null +++ b/config/grub/xhci/patches/0001-borderfix/0001-mitigate-grub-s-missing-characters-for-borders-arrow.patch @@ -0,0 +1,90 @@ +From ce13539fe2103abbd991814d995e06cf96e485f7 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 31 Oct 2021 03:47:05 +0000 +Subject: [PATCH 1/3] mitigate grub's missing characters for borders/arrow + characters + +This cleans up the display on the main screen in GRUB. + +Just don't draw a border, at all. +--- + grub-core/normal/menu_text.c | 49 ++---------------------------------- + 1 file changed, 2 insertions(+), 47 deletions(-) + +diff --git a/grub-core/normal/menu_text.c b/grub-core/normal/menu_text.c +index b1321eb26..e76094dfd 100644 +--- a/grub-core/normal/menu_text.c ++++ b/grub-core/normal/menu_text.c +@@ -108,47 +108,6 @@ grub_print_message_indented (const char *msg, int margin_left, int margin_right, + grub_print_message_indented_real (msg, margin_left, margin_right, term, 0); + } + +-static void +-draw_border (struct grub_term_output *term, const struct grub_term_screen_geometry *geo) +-{ +- int i; +- +- grub_term_setcolorstate (term, GRUB_TERM_COLOR_NORMAL); +- +- grub_term_gotoxy (term, (struct grub_term_coordinate) { geo->first_entry_x - 1, +- geo->first_entry_y - 1 }); +- grub_putcode (GRUB_UNICODE_CORNER_UL, term); +- for (i = 0; i < geo->entry_width + 1; i++) +- grub_putcode (GRUB_UNICODE_HLINE, term); +- grub_putcode (GRUB_UNICODE_CORNER_UR, term); +- +- for (i = 0; i < geo->num_entries; i++) +- { +- grub_term_gotoxy (term, (struct grub_term_coordinate) { geo->first_entry_x - 1, +- geo->first_entry_y + i }); +- grub_putcode (GRUB_UNICODE_VLINE, term); +- grub_term_gotoxy (term, +- (struct grub_term_coordinate) { geo->first_entry_x + geo->entry_width + 1, +- geo->first_entry_y + i }); +- grub_putcode (GRUB_UNICODE_VLINE, term); +- } +- +- grub_term_gotoxy (term, +- (struct grub_term_coordinate) { geo->first_entry_x - 1, +- geo->first_entry_y - 1 + geo->num_entries + 1 }); +- grub_putcode (GRUB_UNICODE_CORNER_LL, term); +- for (i = 0; i < geo->entry_width + 1; i++) +- grub_putcode (GRUB_UNICODE_HLINE, term); +- grub_putcode (GRUB_UNICODE_CORNER_LR, term); +- +- grub_term_setcolorstate (term, GRUB_TERM_COLOR_NORMAL); +- +- grub_term_gotoxy (term, +- (struct grub_term_coordinate) { geo->first_entry_x - 1, +- (geo->first_entry_y - 1 + geo->num_entries +- + GRUB_TERM_MARGIN + 1) }); +-} +- + static int + print_message (int nested, int edit, struct grub_term_output *term, int dry_run) + { +@@ -167,10 +126,8 @@ command-line or ESC to discard edits and return to the GRUB menu."), + { + char *msg_translated; + +- msg_translated = grub_xasprintf (_("Use the %C and %C keys to select which " +- "entry is highlighted."), +- GRUB_UNICODE_UPARROW, +- GRUB_UNICODE_DOWNARROW); ++ msg_translated = grub_xasprintf (_("Use the arrow keys to select which " ++ "entry is highlighted.")); + if (!msg_translated) + return 0; + ret += grub_print_message_indented_real (msg_translated, STANDARD_MARGIN, +@@ -410,8 +367,6 @@ grub_menu_init_page (int nested, int edit, + + grub_term_normal_color = grub_color_menu_normal; + grub_term_highlight_color = grub_color_menu_highlight; +- if (geo->border) +- draw_border (term, geo); + grub_term_normal_color = old_color_normal; + grub_term_highlight_color = old_color_highlight; + geo->timeout_y = geo->first_entry_y + geo->num_entries +-- +2.25.1 + diff --git a/config/grub/xhci/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch b/config/grub/xhci/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch new file mode 100644 index 00000000..6ff97979 --- /dev/null +++ b/config/grub/xhci/patches/0001-borderfix/0002-say-the-name-libreboot-in-the-grub-menu.patch @@ -0,0 +1,25 @@ +From 70f9e72c3ff6381fe3519612de3b649c0cf26b9a Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sat, 19 Nov 2022 16:30:24 +0000 +Subject: [PATCH 2/3] say the name libreboot, in the grub menu + +--- + grub-core/normal/main.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/grub-core/normal/main.c b/grub-core/normal/main.c +index bd4431000..31308e16a 100644 +--- a/grub-core/normal/main.c ++++ b/grub-core/normal/main.c +@@ -209,7 +209,7 @@ grub_normal_init_page (struct grub_term_output *term, + + grub_term_cls (term); + +- msg_formatted = grub_xasprintf (_("GNU GRUB version %s"), PACKAGE_VERSION); ++ msg_formatted = grub_xasprintf (_("Libreboot 20240504 release, based on coreboot. https://libreboot.org/")); + if (!msg_formatted) + return; + +-- +2.25.1 + diff --git a/config/grub/xhci/patches/0002-luks2/0003-Add-CC0-license.patch b/config/grub/xhci/patches/0002-luks2/0003-Add-CC0-license.patch new file mode 100644 index 00000000..dc9060c3 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0003-Add-CC0-license.patch @@ -0,0 +1,42 @@ +From de6e7cc62522ce1be21bd2f06e7c15cd234b5426 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 1/6] Add CC0 license + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + grub-core/kern/dl.c | 3 ++- + util/grub-module-verifierXX.c | 3 ++- + 2 files changed, 4 insertions(+), 2 deletions(-) + +diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c +index 0bf40caa6..4011e2d15 100644 +--- a/grub-core/kern/dl.c ++++ b/grub-core/kern/dl.c +@@ -470,7 +470,8 @@ grub_dl_check_license (grub_dl_t mod, Elf_Ehdr *e) + + if (grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3") == 0 + || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv3+") == 0 +- || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0) ++ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=GPLv2+") == 0 ++ || grub_strcmp ((char *) e + s->sh_offset, "LICENSE=CC0") == 0) + return GRUB_ERR_NONE; + + return grub_error (GRUB_ERR_BAD_MODULE, +diff --git a/util/grub-module-verifierXX.c b/util/grub-module-verifierXX.c +index a42c20bd1..7157a30aa 100644 +--- a/util/grub-module-verifierXX.c ++++ b/util/grub-module-verifierXX.c +@@ -236,7 +236,8 @@ check_license (const char * const filename, + Elf_Shdr *s = find_section (arch, e, ".module_license", module_size); + if (s && (strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3") == 0 + || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv3+") == 0 +- || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0)) ++ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=GPLv2+") == 0 ++ || strcmp ((char *) e + grub_target_to_host(s->sh_offset), "LICENSE=CC0") == 0)) + return; + grub_util_error ("%s: incompatible license", filename); + } +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch b/config/grub/xhci/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch new file mode 100644 index 00000000..be875e67 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0004-Define-GRUB_UINT32_MAX.patch @@ -0,0 +1,39 @@ +From 9edaaffac91d593a439e44bac3b6f5558f5a8245 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 2/6] Define GRUB_UINT32_MAX + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + include/grub/types.h | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/include/grub/types.h b/include/grub/types.h +index 0d96006fe..a13f3a60b 100644 +--- a/include/grub/types.h ++++ b/include/grub/types.h +@@ -156,6 +156,7 @@ typedef grub_int32_t grub_ssize_t; + #define GRUB_SHRT_MAX 0x7fff + #define GRUB_SHRT_MIN (-GRUB_SHRT_MAX - 1) + #define GRUB_UINT_MAX 4294967295U ++#define GRUB_UINT32_MAX 4294967295U + #define GRUB_INT_MAX 0x7fffffff + #define GRUB_INT_MIN (-GRUB_INT_MAX - 1) + #define GRUB_INT32_MAX 2147483647 +@@ -177,6 +178,13 @@ typedef grub_int32_t grub_ssize_t; + #define GRUB_TYPE_U_MAX(type) ((unsigned long long)((typeof (type))(~0))) + #define GRUB_TYPE_U_MIN(type) 0ULL + ++# define GRUB_UINT32_C(x) x ## U ++# if GRUB_ULONG_MAX >> 31 >> 31 >> 1 == 1 ++# define GRUB_UINT64_C(x) x##UL ++# elif 1 ++# define GRUB_UINT64_C(x) x##ULL ++# endif ++ + typedef grub_uint64_t grub_properly_aligned_t; + + #define GRUB_PROPERLY_ALIGNED_ARRAY(name, size) grub_properly_aligned_t name[((size) + sizeof (grub_properly_aligned_t) - 1) / sizeof (grub_properly_aligned_t)] +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0005-Add-Argon2-algorithm.patch b/config/grub/xhci/patches/0002-luks2/0005-Add-Argon2-algorithm.patch new file mode 100644 index 00000000..1c6b4f04 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0005-Add-Argon2-algorithm.patch @@ -0,0 +1,2611 @@ +From 5b63da5c4267933f573ca37ce39a073098c443ba Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 3/6] Add Argon2 algorithm + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + docs/grub-dev.texi | 64 +++ + grub-core/Makefile.core.def | 8 + + grub-core/lib/argon2/LICENSE | 314 +++++++++++ + grub-core/lib/argon2/argon2.c | 232 ++++++++ + grub-core/lib/argon2/argon2.h | 264 +++++++++ + grub-core/lib/argon2/blake2/blake2-impl.h | 151 ++++++ + grub-core/lib/argon2/blake2/blake2.h | 89 +++ + grub-core/lib/argon2/blake2/blake2b.c | 388 ++++++++++++++ + .../lib/argon2/blake2/blamka-round-ref.h | 56 ++ + grub-core/lib/argon2/core.c | 506 ++++++++++++++++++ + grub-core/lib/argon2/core.h | 228 ++++++++ + grub-core/lib/argon2/ref.c | 190 +++++++ + 12 files changed, 2490 insertions(+) + create mode 100644 grub-core/lib/argon2/LICENSE + create mode 100644 grub-core/lib/argon2/argon2.c + create mode 100644 grub-core/lib/argon2/argon2.h + create mode 100644 grub-core/lib/argon2/blake2/blake2-impl.h + create mode 100644 grub-core/lib/argon2/blake2/blake2.h + create mode 100644 grub-core/lib/argon2/blake2/blake2b.c + create mode 100644 grub-core/lib/argon2/blake2/blamka-round-ref.h + create mode 100644 grub-core/lib/argon2/core.c + create mode 100644 grub-core/lib/argon2/core.h + create mode 100644 grub-core/lib/argon2/ref.c + +diff --git a/docs/grub-dev.texi b/docs/grub-dev.texi +index a695b02f0..313335a53 100644 +--- a/docs/grub-dev.texi ++++ b/docs/grub-dev.texi +@@ -503,11 +503,75 @@ GRUB includes some code from other projects, and it is sometimes necessary + to update it. + + @menu ++* Argon2:: + * Gnulib:: + * jsmn:: + * minilzo:: + @end menu + ++@node Argon2 ++@section Argon2 ++ ++Argon2 is a key derivation function used by LUKS2 in order to derive encryption ++keys from a user-provided password. GRUB imports the official reference ++implementation of Argon2 from @url{https://github.com/P-H-C/phc-winner-argon2}. ++In order to make the library usable for GRUB, we need to perform various ++conversions. This is mainly due to the fact that the imported code makes use of ++types and functions defined in the C standard library, which isn't available. ++Furthermore, using the POSIX wrapper library is not possible as the code needs ++to be part of the kernel. ++ ++Updating the code can thus be performed like following: ++ ++@example ++$ git clone https://github.com/P-H-C/phc-winner-argon2 argon2 ++$ cp argon2/include/argon2.h argon2/src/@{argon2.c,core.c,core.h,ref.c@} \ ++ grub-core/lib/argon2/ ++$ cp argon2/src/blake2/@{blake2-impl.h,blake2.h,blake2b.c,blamka-round-ref.h@} \ ++ grub-core/lib/argon2/blake2/ ++$ sed -e 's/UINT32_C/GRUB_UINT32_C/g' \ ++ -e 's/UINT64_C/GRUB_UINT64_C/g' \ ++ -e 's/UINT32_MAX/GRUB_UINT32_MAX/g' \ ++ -e 's/CHAR_BIT/GRUB_CHAR_BIT/g' \ ++ -e 's/UINT_MAX/GRUB_UINT_MAX/g' \ ++ -e 's/uintptr_t/grub_addr_t/g' \ ++ -e 's/size_t/grub_size_t/g' \ ++ -e 's/uint32_t/grub_uint32_t/g' \ ++ -e 's/uint64_t/grub_uint64_t/g' \ ++ -e 's/uint8_t/grub_uint8_t/g' \ ++ -e 's/memset/grub_memset/g' \ ++ -e 's/memcpy/grub_memcpy/g' \ ++ -e 's/malloc/grub_malloc/g' \ ++ -e 's/free/grub_free/g' \ ++ -e 's/#elif _MSC_VER/#elif defined(_MSC_VER)/' \ ++ grub-core/lib/argon2/@{*,blake2/*@}.@{c,h@} -i ++@end example ++ ++Afterwards, you need to perform the following manual steps: ++ ++@enumerate ++@item Remove all includes of standard library headers, "encoding.h" and ++ "thread.h". ++@item Add includes <grub/mm.h> and <grub/misc.h> to "argon2.h". ++@item Add include <grub/dl.h> and module license declaration to "argon2.c". ++@item Remove the following declarations and functions from "argon2.h" and ++ "argon2.c": argon2_type2string, argon2i_hash_encoded, argon2i_hash_raw, ++ argon2d_hash_encoded, argon2d_hash_raw, argon2id_hash_encoded, ++ argon2id_hash_raw, argon2_compare, argon2_verify, argon2i_verify, ++ argon2d_verify, argon2id_verify, argon2d_ctx, argon2i_ctx, argon2id_ctx, ++ argon2_verify_ctx, argon2d_verify_ctx, argon2i_verify_ctx, ++ argon2id_verify_ctx, argon2_encodedlen. ++@item Move the declaration of `clear_internal_memory()` in "blake2-impl.h" to ++ "blake2b.c". ++@item Remove code guarded by the ARGON2_NO_THREADS macro. ++@item Remove parameters `encoded` and `encodedlen` from `argon2_hash` and remove ++ the encoding block in that function. ++@item Remove parameter verifications in `validate_inputs()` for ++ ARGON2_MIN_PWD_LENGTH, ARGON2_MIN_SECRET, ARGON2_MIN_AD_LENGTH and ++ ARGON2_MAX_MEMORY to fix compiler warnings. ++@item Mark the function argon2_ctx as static. ++@end enumerate ++ + @node Gnulib + @section Gnulib + +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index d2cf29584..4a06789e5 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -1215,6 +1215,14 @@ module = { + common = lib/json/json.c; + }; + ++module = { ++ name = argon2; ++ common = lib/argon2/argon2.c; ++ common = lib/argon2/core.c; ++ common = lib/argon2/ref.c; ++ common = lib/argon2/blake2/blake2b.c; ++}; ++ + module = { + name = afsplitter; + common = disk/AFSplitter.c; +diff --git a/grub-core/lib/argon2/LICENSE b/grub-core/lib/argon2/LICENSE +new file mode 100644 +index 000000000..97aae2925 +--- /dev/null ++++ b/grub-core/lib/argon2/LICENSE +@@ -0,0 +1,314 @@ ++Argon2 reference source code package - reference C implementations ++ ++Copyright 2015 ++Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ ++You may use this work under the terms of a Creative Commons CC0 1.0 ++License/Waiver or the Apache Public License 2.0, at your option. The terms of ++these licenses can be found at: ++ ++- CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++- Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ ++The terms of the licenses are reproduced below. ++ ++-------------------------------------------------------------------------------- ++ ++Creative Commons Legal Code ++ ++CC0 1.0 Universal ++ ++ CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE ++ LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN ++ ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS ++ INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES ++ REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS ++ PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM ++ THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED ++ HEREUNDER. ++ ++Statement of Purpose ++ ++The laws of most jurisdictions throughout the world automatically confer ++exclusive Copyright and Related Rights (defined below) upon the creator ++and subsequent owner(s) (each and all, an "owner") of an original work of ++authorship and/or a database (each, a "Work"). ++ ++Certain owners wish to permanently relinquish those rights to a Work for ++the purpose of contributing to a commons of creative, cultural and ++scientific works ("Commons") that the public can reliably and without fear ++of later claims of infringement build upon, modify, incorporate in other ++works, reuse and redistribute as freely as possible in any form whatsoever ++and for any purposes, including without limitation commercial purposes. ++These owners may contribute to the Commons to promote the ideal of a free ++culture and the further production of creative, cultural and scientific ++works, or to gain reputation or greater distribution for their Work in ++part through the use and efforts of others. ++ ++For these and/or other purposes and motivations, and without any ++expectation of additional consideration or compensation, the person ++associating CC0 with a Work (the "Affirmer"), to the extent that he or she ++is an owner of Copyright and Related Rights in the Work, voluntarily ++elects to apply CC0 to the Work and publicly distribute the Work under its ++terms, with knowledge of his or her Copyright and Related Rights in the ++Work and the meaning and intended legal effect of CC0 on those rights. ++ ++1. Copyright and Related Rights. A Work made available under CC0 may be ++protected by copyright and related or neighboring rights ("Copyright and ++Related Rights"). Copyright and Related Rights include, but are not ++limited to, the following: ++ ++ i. the right to reproduce, adapt, distribute, perform, display, ++ communicate, and translate a Work; ++ ii. moral rights retained by the original author(s) and/or performer(s); ++iii. publicity and privacy rights pertaining to a person's image or ++ likeness depicted in a Work; ++ iv. rights protecting against unfair competition in regards to a Work, ++ subject to the limitations in paragraph 4(a), below; ++ v. rights protecting the extraction, dissemination, use and reuse of data ++ in a Work; ++ vi. database rights (such as those arising under Directive 96/9/EC of the ++ European Parliament and of the Council of 11 March 1996 on the legal ++ protection of databases, and under any national implementation ++ thereof, including any amended or successor version of such ++ directive); and ++vii. other similar, equivalent or corresponding rights throughout the ++ world based on applicable law or treaty, and any national ++ implementations thereof. ++ ++2. Waiver. To the greatest extent permitted by, but not in contravention ++of, applicable law, Affirmer hereby overtly, fully, permanently, ++irrevocably and unconditionally waives, abandons, and surrenders all of ++Affirmer's Copyright and Related Rights and associated claims and causes ++of action, whether now known or unknown (including existing as well as ++future claims and causes of action), in the Work (i) in all territories ++worldwide, (ii) for the maximum duration provided by applicable law or ++treaty (including future time extensions), (iii) in any current or future ++medium and for any number of copies, and (iv) for any purpose whatsoever, ++including without limitation commercial, advertising or promotional ++purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each ++member of the public at large and to the detriment of Affirmer's heirs and ++successors, fully intending that such Waiver shall not be subject to ++revocation, rescission, cancellation, termination, or any other legal or ++equitable action to disrupt the quiet enjoyment of the Work by the public ++as contemplated by Affirmer's express Statement of Purpose. ++ ++3. Public License Fallback. Should any part of the Waiver for any reason ++be judged legally invalid or ineffective under applicable law, then the ++Waiver shall be preserved to the maximum extent permitted taking into ++account Affirmer's express Statement of Purpose. In addition, to the ++extent the Waiver is so judged Affirmer hereby grants to each affected ++person a royalty-free, non transferable, non sublicensable, non exclusive, ++irrevocable and unconditional license to exercise Affirmer's Copyright and ++Related Rights in the Work (i) in all territories worldwide, (ii) for the ++maximum duration provided by applicable law or treaty (including future ++time extensions), (iii) in any current or future medium and for any number ++of copies, and (iv) for any purpose whatsoever, including without ++limitation commercial, advertising or promotional purposes (the ++"License"). The License shall be deemed effective as of the date CC0 was ++applied by Affirmer to the Work. Should any part of the License for any ++reason be judged legally invalid or ineffective under applicable law, such ++partial invalidity or ineffectiveness shall not invalidate the remainder ++of the License, and in such case Affirmer hereby affirms that he or she ++will not (i) exercise any of his or her remaining Copyright and Related ++Rights in the Work or (ii) assert any associated claims and causes of ++action with respect to the Work, in either case contrary to Affirmer's ++express Statement of Purpose. ++ ++4. Limitations and Disclaimers. ++ ++ a. No trademark or patent rights held by Affirmer are waived, abandoned, ++ surrendered, licensed or otherwise affected by this document. ++ b. Affirmer offers the Work as-is and makes no representations or ++ warranties of any kind concerning the Work, express, implied, ++ statutory or otherwise, including without limitation warranties of ++ title, merchantability, fitness for a particular purpose, non ++ infringement, or the absence of latent or other defects, accuracy, or ++ the present or absence of errors, whether or not discoverable, all to ++ the greatest extent permissible under applicable law. ++ c. Affirmer disclaims responsibility for clearing rights of other persons ++ that may apply to the Work or any use thereof, including without ++ limitation any person's Copyright and Related Rights in the Work. ++ Further, Affirmer disclaims responsibility for obtaining any necessary ++ consents, permissions or other rights required for any use of the ++ Work. ++ d. Affirmer understands and acknowledges that Creative Commons is not a ++ party to this document and has no duty or obligation with respect to ++ this CC0 or use of the Work. ++ ++-------------------------------------------------------------------------------- ++ ++ Apache License ++ Version 2.0, January 2004 ++ http://www.apache.org/licenses/ ++ ++ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION ++ ++ 1. Definitions. ++ ++ "License" shall mean the terms and conditions for use, reproduction, ++ and distribution as defined by Sections 1 through 9 of this document. ++ ++ "Licensor" shall mean the copyright owner or entity authorized by ++ the copyright owner that is granting the License. ++ ++ "Legal Entity" shall mean the union of the acting entity and all ++ other entities that control, are controlled by, or are under common ++ control with that entity. For the purposes of this definition, ++ "control" means (i) the power, direct or indirect, to cause the ++ direction or management of such entity, whether by contract or ++ otherwise, or (ii) ownership of fifty percent (50%) or more of the ++ outstanding shares, or (iii) beneficial ownership of such entity. ++ ++ "You" (or "Your") shall mean an individual or Legal Entity ++ exercising permissions granted by this License. ++ ++ "Source" form shall mean the preferred form for making modifications, ++ including but not limited to software source code, documentation ++ source, and configuration files. ++ ++ "Object" form shall mean any form resulting from mechanical ++ transformation or translation of a Source form, including but ++ not limited to compiled object code, generated documentation, ++ and conversions to other media types. ++ ++ "Work" shall mean the work of authorship, whether in Source or ++ Object form, made available under the License, as indicated by a ++ copyright notice that is included in or attached to the work ++ (an example is provided in the Appendix below). ++ ++ "Derivative Works" shall mean any work, whether in Source or Object ++ form, that is based on (or derived from) the Work and for which the ++ editorial revisions, annotations, elaborations, or other modifications ++ represent, as a whole, an original work of authorship. For the purposes ++ of this License, Derivative Works shall not include works that remain ++ separable from, or merely link (or bind by name) to the interfaces of, ++ the Work and Derivative Works thereof. ++ ++ "Contribution" shall mean any work of authorship, including ++ the original version of the Work and any modifications or additions ++ to that Work or Derivative Works thereof, that is intentionally ++ submitted to Licensor for inclusion in the Work by the copyright owner ++ or by an individual or Legal Entity authorized to submit on behalf of ++ the copyright owner. For the purposes of this definition, "submitted" ++ means any form of electronic, verbal, or written communication sent ++ to the Licensor or its representatives, including but not limited to ++ communication on electronic mailing lists, source code control systems, ++ and issue tracking systems that are managed by, or on behalf of, the ++ Licensor for the purpose of discussing and improving the Work, but ++ excluding communication that is conspicuously marked or otherwise ++ designated in writing by the copyright owner as "Not a Contribution." ++ ++ "Contributor" shall mean Licensor and any individual or Legal Entity ++ on behalf of whom a Contribution has been received by Licensor and ++ subsequently incorporated within the Work. ++ ++ 2. Grant of Copyright License. Subject to the terms and conditions of ++ this License, each Contributor hereby grants to You a perpetual, ++ worldwide, non-exclusive, no-charge, royalty-free, irrevocable ++ copyright license to reproduce, prepare Derivative Works of, ++ publicly display, publicly perform, sublicense, and distribute the ++ Work and such Derivative Works in Source or Object form. ++ ++ 3. Grant of Patent License. Subject to the terms and conditions of ++ this License, each Contributor hereby grants to You a perpetual, ++ worldwide, non-exclusive, no-charge, royalty-free, irrevocable ++ (except as stated in this section) patent license to make, have made, ++ use, offer to sell, sell, import, and otherwise transfer the Work, ++ where such license applies only to those patent claims licensable ++ by such Contributor that are necessarily infringed by their ++ Contribution(s) alone or by combination of their Contribution(s) ++ with the Work to which such Contribution(s) was submitted. If You ++ institute patent litigation against any entity (including a ++ cross-claim or counterclaim in a lawsuit) alleging that the Work ++ or a Contribution incorporated within the Work constitutes direct ++ or contributory patent infringement, then any patent licenses ++ granted to You under this License for that Work shall terminate ++ as of the date such litigation is filed. ++ ++ 4. Redistribution. You may reproduce and distribute copies of the ++ Work or Derivative Works thereof in any medium, with or without ++ modifications, and in Source or Object form, provided that You ++ meet the following conditions: ++ ++ (a) You must give any other recipients of the Work or ++ Derivative Works a copy of this License; and ++ ++ (b) You must cause any modified files to carry prominent notices ++ stating that You changed the files; and ++ ++ (c) You must retain, in the Source form of any Derivative Works ++ that You distribute, all copyright, patent, trademark, and ++ attribution notices from the Source form of the Work, ++ excluding those notices that do not pertain to any part of ++ the Derivative Works; and ++ ++ (d) If the Work includes a "NOTICE" text file as part of its ++ distribution, then any Derivative Works that You distribute must ++ include a readable copy of the attribution notices contained ++ within such NOTICE file, excluding those notices that do not ++ pertain to any part of the Derivative Works, in at least one ++ of the following places: within a NOTICE text file distributed ++ as part of the Derivative Works; within the Source form or ++ documentation, if provided along with the Derivative Works; or, ++ within a display generated by the Derivative Works, if and ++ wherever such third-party notices normally appear. The contents ++ of the NOTICE file are for informational purposes only and ++ do not modify the License. You may add Your own attribution ++ notices within Derivative Works that You distribute, alongside ++ or as an addendum to the NOTICE text from the Work, provided ++ that such additional attribution notices cannot be construed ++ as modifying the License. ++ ++ You may add Your own copyright statement to Your modifications and ++ may provide additional or different license terms and conditions ++ for use, reproduction, or distribution of Your modifications, or ++ for any such Derivative Works as a whole, provided Your use, ++ reproduction, and distribution of the Work otherwise complies with ++ the conditions stated in this License. ++ ++ 5. Submission of Contributions. Unless You explicitly state otherwise, ++ any Contribution intentionally submitted for inclusion in the Work ++ by You to the Licensor shall be under the terms and conditions of ++ this License, without any additional terms or conditions. ++ Notwithstanding the above, nothing herein shall supersede or modify ++ the terms of any separate license agreement you may have executed ++ with Licensor regarding such Contributions. ++ ++ 6. Trademarks. This License does not grant permission to use the trade ++ names, trademarks, service marks, or product names of the Licensor, ++ except as required for reasonable and customary use in describing the ++ origin of the Work and reproducing the content of the NOTICE file. ++ ++ 7. Disclaimer of Warranty. Unless required by applicable law or ++ agreed to in writing, Licensor provides the Work (and each ++ Contributor provides its Contributions) on an "AS IS" BASIS, ++ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or ++ implied, including, without limitation, any warranties or conditions ++ of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A ++ PARTICULAR PURPOSE. You are solely responsible for determining the ++ appropriateness of using or redistributing the Work and assume any ++ risks associated with Your exercise of permissions under this License. ++ ++ 8. Limitation of Liability. In no event and under no legal theory, ++ whether in tort (including negligence), contract, or otherwise, ++ unless required by applicable law (such as deliberate and grossly ++ negligent acts) or agreed to in writing, shall any Contributor be ++ liable to You for damages, including any direct, indirect, special, ++ incidental, or consequential damages of any character arising as a ++ result of this License or out of the use or inability to use the ++ Work (including but not limited to damages for loss of goodwill, ++ work stoppage, computer failure or malfunction, or any and all ++ other commercial damages or losses), even if such Contributor ++ has been advised of the possibility of such damages. ++ ++ 9. Accepting Warranty or Additional Liability. While redistributing ++ the Work or Derivative Works thereof, You may choose to offer, ++ and charge a fee for, acceptance of support, warranty, indemnity, ++ or other liability obligations and/or rights consistent with this ++ License. However, in accepting such obligations, You may act only ++ on Your own behalf and on Your sole responsibility, not on behalf ++ of any other Contributor, and only if You agree to indemnify, ++ defend, and hold each Contributor harmless for any liability ++ incurred by, or claims asserted against, such Contributor by reason ++ of your accepting any such warranty or additional liability. +diff --git a/grub-core/lib/argon2/argon2.c b/grub-core/lib/argon2/argon2.c +new file mode 100644 +index 000000000..49532fe80 +--- /dev/null ++++ b/grub-core/lib/argon2/argon2.c +@@ -0,0 +1,232 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#include <grub/dl.h> ++ ++#include "argon2.h" ++#include "core.h" ++ ++GRUB_MOD_LICENSE ("CC0"); ++ ++static int argon2_ctx(argon2_context *context, argon2_type type) { ++ /* 1. Validate all inputs */ ++ int result = validate_inputs(context); ++ grub_uint32_t memory_blocks, segment_length; ++ argon2_instance_t instance; ++ ++ if (ARGON2_OK != result) { ++ return result; ++ } ++ ++ if (Argon2_d != type && Argon2_i != type && Argon2_id != type) { ++ return ARGON2_INCORRECT_TYPE; ++ } ++ ++ /* 2. Align memory size */ ++ /* Minimum memory_blocks = 8L blocks, where L is the number of lanes */ ++ memory_blocks = context->m_cost; ++ ++ if (memory_blocks < 2 * ARGON2_SYNC_POINTS * context->lanes) { ++ memory_blocks = 2 * ARGON2_SYNC_POINTS * context->lanes; ++ } ++ ++ segment_length = memory_blocks / (context->lanes * ARGON2_SYNC_POINTS); ++ /* Ensure that all segments have equal length */ ++ memory_blocks = segment_length * (context->lanes * ARGON2_SYNC_POINTS); ++ ++ instance.version = context->version; ++ instance.memory = NULL; ++ instance.passes = context->t_cost; ++ instance.memory_blocks = memory_blocks; ++ instance.segment_length = segment_length; ++ instance.lane_length = segment_length * ARGON2_SYNC_POINTS; ++ instance.lanes = context->lanes; ++ instance.threads = context->threads; ++ instance.type = type; ++ ++ if (instance.threads > instance.lanes) { ++ instance.threads = instance.lanes; ++ } ++ ++ /* 3. Initialization: Hashing inputs, allocating memory, filling first ++ * blocks ++ */ ++ result = initialize(&instance, context); ++ ++ if (ARGON2_OK != result) { ++ return result; ++ } ++ ++ /* 4. Filling memory */ ++ result = fill_memory_blocks(&instance); ++ ++ if (ARGON2_OK != result) { ++ return result; ++ } ++ /* 5. Finalization */ ++ finalize(context, &instance); ++ ++ return ARGON2_OK; ++} ++ ++int argon2_hash(const grub_uint32_t t_cost, const grub_uint32_t m_cost, ++ const grub_uint32_t parallelism, const void *pwd, ++ const grub_size_t pwdlen, const void *salt, const grub_size_t saltlen, ++ void *hash, const grub_size_t hashlen, argon2_type type, ++ const grub_uint32_t version){ ++ ++ argon2_context context; ++ int result; ++ grub_uint8_t *out; ++ ++ if (pwdlen > ARGON2_MAX_PWD_LENGTH) { ++ return ARGON2_PWD_TOO_LONG; ++ } ++ ++ if (saltlen > ARGON2_MAX_SALT_LENGTH) { ++ return ARGON2_SALT_TOO_LONG; ++ } ++ ++ if (hashlen > ARGON2_MAX_OUTLEN) { ++ return ARGON2_OUTPUT_TOO_LONG; ++ } ++ ++ if (hashlen < ARGON2_MIN_OUTLEN) { ++ return ARGON2_OUTPUT_TOO_SHORT; ++ } ++ ++ out = grub_malloc(hashlen); ++ if (!out) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ context.out = (grub_uint8_t *)out; ++ context.outlen = (grub_uint32_t)hashlen; ++ context.pwd = CONST_CAST(grub_uint8_t *)pwd; ++ context.pwdlen = (grub_uint32_t)pwdlen; ++ context.salt = CONST_CAST(grub_uint8_t *)salt; ++ context.saltlen = (grub_uint32_t)saltlen; ++ context.secret = NULL; ++ context.secretlen = 0; ++ context.ad = NULL; ++ context.adlen = 0; ++ context.t_cost = t_cost; ++ context.m_cost = m_cost; ++ context.lanes = parallelism; ++ context.threads = parallelism; ++ context.allocate_cbk = NULL; ++ context.grub_free_cbk = NULL; ++ context.flags = ARGON2_DEFAULT_FLAGS; ++ context.version = version; ++ ++ result = argon2_ctx(&context, type); ++ ++ if (result != ARGON2_OK) { ++ clear_internal_memory(out, hashlen); ++ grub_free(out); ++ return result; ++ } ++ ++ /* if raw hash requested, write it */ ++ if (hash) { ++ grub_memcpy(hash, out, hashlen); ++ } ++ ++ clear_internal_memory(out, hashlen); ++ grub_free(out); ++ ++ return ARGON2_OK; ++} ++ ++const char *argon2_error_message(int error_code) { ++ switch (error_code) { ++ case ARGON2_OK: ++ return "OK"; ++ case ARGON2_OUTPUT_PTR_NULL: ++ return "Output pointer is NULL"; ++ case ARGON2_OUTPUT_TOO_SHORT: ++ return "Output is too short"; ++ case ARGON2_OUTPUT_TOO_LONG: ++ return "Output is too long"; ++ case ARGON2_PWD_TOO_SHORT: ++ return "Password is too short"; ++ case ARGON2_PWD_TOO_LONG: ++ return "Password is too long"; ++ case ARGON2_SALT_TOO_SHORT: ++ return "Salt is too short"; ++ case ARGON2_SALT_TOO_LONG: ++ return "Salt is too long"; ++ case ARGON2_AD_TOO_SHORT: ++ return "Associated data is too short"; ++ case ARGON2_AD_TOO_LONG: ++ return "Associated data is too long"; ++ case ARGON2_SECRET_TOO_SHORT: ++ return "Secret is too short"; ++ case ARGON2_SECRET_TOO_LONG: ++ return "Secret is too long"; ++ case ARGON2_TIME_TOO_SMALL: ++ return "Time cost is too small"; ++ case ARGON2_TIME_TOO_LARGE: ++ return "Time cost is too large"; ++ case ARGON2_MEMORY_TOO_LITTLE: ++ return "Memory cost is too small"; ++ case ARGON2_MEMORY_TOO_MUCH: ++ return "Memory cost is too large"; ++ case ARGON2_LANES_TOO_FEW: ++ return "Too few lanes"; ++ case ARGON2_LANES_TOO_MANY: ++ return "Too many lanes"; ++ case ARGON2_PWD_PTR_MISMATCH: ++ return "Password pointer is NULL, but password length is not 0"; ++ case ARGON2_SALT_PTR_MISMATCH: ++ return "Salt pointer is NULL, but salt length is not 0"; ++ case ARGON2_SECRET_PTR_MISMATCH: ++ return "Secret pointer is NULL, but secret length is not 0"; ++ case ARGON2_AD_PTR_MISMATCH: ++ return "Associated data pointer is NULL, but ad length is not 0"; ++ case ARGON2_MEMORY_ALLOCATION_ERROR: ++ return "Memory allocation error"; ++ case ARGON2_FREE_MEMORY_CBK_NULL: ++ return "The grub_free memory callback is NULL"; ++ case ARGON2_ALLOCATE_MEMORY_CBK_NULL: ++ return "The allocate memory callback is NULL"; ++ case ARGON2_INCORRECT_PARAMETER: ++ return "Argon2_Context context is NULL"; ++ case ARGON2_INCORRECT_TYPE: ++ return "There is no such version of Argon2"; ++ case ARGON2_OUT_PTR_MISMATCH: ++ return "Output pointer mismatch"; ++ case ARGON2_THREADS_TOO_FEW: ++ return "Not enough threads"; ++ case ARGON2_THREADS_TOO_MANY: ++ return "Too many threads"; ++ case ARGON2_MISSING_ARGS: ++ return "Missing arguments"; ++ case ARGON2_ENCODING_FAIL: ++ return "Encoding failed"; ++ case ARGON2_DECODING_FAIL: ++ return "Decoding failed"; ++ case ARGON2_THREAD_FAIL: ++ return "Threading failure"; ++ case ARGON2_DECODING_LENGTH_FAIL: ++ return "Some of encoded parameters are too long or too short"; ++ case ARGON2_VERIFY_MISMATCH: ++ return "The password does not match the supplied hash"; ++ default: ++ return "Unknown error code"; ++ } ++} +diff --git a/grub-core/lib/argon2/argon2.h b/grub-core/lib/argon2/argon2.h +new file mode 100644 +index 000000000..129f7efbd +--- /dev/null ++++ b/grub-core/lib/argon2/argon2.h +@@ -0,0 +1,264 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef ARGON2_H ++#define ARGON2_H ++ ++#include <grub/misc.h> ++#include <grub/mm.h> ++ ++#if defined(__cplusplus) ++extern "C" { ++#endif ++ ++/* Symbols visibility control */ ++#ifdef A2_VISCTL ++#define ARGON2_PUBLIC __attribute__((visibility("default"))) ++#define ARGON2_LOCAL __attribute__ ((visibility ("hidden"))) ++#elif defined(_MSC_VER) ++#define ARGON2_PUBLIC __declspec(dllexport) ++#define ARGON2_LOCAL ++#else ++#define ARGON2_PUBLIC ++#define ARGON2_LOCAL ++#endif ++ ++/* ++ * Argon2 input parameter restrictions ++ */ ++ ++/* Minimum and maximum number of lanes (degree of parallelism) */ ++#define ARGON2_MIN_LANES GRUB_UINT32_C(1) ++#define ARGON2_MAX_LANES GRUB_UINT32_C(0xFFFFFF) ++ ++/* Minimum and maximum number of threads */ ++#define ARGON2_MIN_THREADS GRUB_UINT32_C(1) ++#define ARGON2_MAX_THREADS GRUB_UINT32_C(0xFFFFFF) ++ ++/* Number of synchronization points between lanes per pass */ ++#define ARGON2_SYNC_POINTS GRUB_UINT32_C(4) ++ ++/* Minimum and maximum digest size in bytes */ ++#define ARGON2_MIN_OUTLEN GRUB_UINT32_C(4) ++#define ARGON2_MAX_OUTLEN GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum number of memory blocks (each of BLOCK_SIZE bytes) */ ++#define ARGON2_MIN_MEMORY (2 * ARGON2_SYNC_POINTS) /* 2 blocks per slice */ ++ ++#define ARGON2_MIN(a, b) ((a) < (b) ? (a) : (b)) ++/* Max memory size is addressing-space/2, topping at 2^32 blocks (4 TB) */ ++#define ARGON2_MAX_MEMORY_BITS \ ++ ARGON2_MIN(GRUB_UINT32_C(32), (sizeof(void *) * GRUB_CHAR_BIT - 10 - 1)) ++#define ARGON2_MAX_MEMORY \ ++ ARGON2_MIN(GRUB_UINT32_C(0xFFFFFFFF), GRUB_UINT64_C(1) << ARGON2_MAX_MEMORY_BITS) ++ ++/* Minimum and maximum number of passes */ ++#define ARGON2_MIN_TIME GRUB_UINT32_C(1) ++#define ARGON2_MAX_TIME GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum password length in bytes */ ++#define ARGON2_MIN_PWD_LENGTH GRUB_UINT32_C(0) ++#define ARGON2_MAX_PWD_LENGTH GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum associated data length in bytes */ ++#define ARGON2_MIN_AD_LENGTH GRUB_UINT32_C(0) ++#define ARGON2_MAX_AD_LENGTH GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum salt length in bytes */ ++#define ARGON2_MIN_SALT_LENGTH GRUB_UINT32_C(8) ++#define ARGON2_MAX_SALT_LENGTH GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Minimum and maximum key length in bytes */ ++#define ARGON2_MIN_SECRET GRUB_UINT32_C(0) ++#define ARGON2_MAX_SECRET GRUB_UINT32_C(0xFFFFFFFF) ++ ++/* Flags to determine which fields are securely wiped (default = no wipe). */ ++#define ARGON2_DEFAULT_FLAGS GRUB_UINT32_C(0) ++#define ARGON2_FLAG_CLEAR_PASSWORD (GRUB_UINT32_C(1) << 0) ++#define ARGON2_FLAG_CLEAR_SECRET (GRUB_UINT32_C(1) << 1) ++ ++/* Global flag to determine if we are wiping internal memory buffers. This flag ++ * is defined in core.c and defaults to 1 (wipe internal memory). */ ++extern int FLAG_clear_internal_memory; ++ ++/* Error codes */ ++typedef enum Argon2_ErrorCodes { ++ ARGON2_OK = 0, ++ ++ ARGON2_OUTPUT_PTR_NULL = -1, ++ ++ ARGON2_OUTPUT_TOO_SHORT = -2, ++ ARGON2_OUTPUT_TOO_LONG = -3, ++ ++ ARGON2_PWD_TOO_SHORT = -4, ++ ARGON2_PWD_TOO_LONG = -5, ++ ++ ARGON2_SALT_TOO_SHORT = -6, ++ ARGON2_SALT_TOO_LONG = -7, ++ ++ ARGON2_AD_TOO_SHORT = -8, ++ ARGON2_AD_TOO_LONG = -9, ++ ++ ARGON2_SECRET_TOO_SHORT = -10, ++ ARGON2_SECRET_TOO_LONG = -11, ++ ++ ARGON2_TIME_TOO_SMALL = -12, ++ ARGON2_TIME_TOO_LARGE = -13, ++ ++ ARGON2_MEMORY_TOO_LITTLE = -14, ++ ARGON2_MEMORY_TOO_MUCH = -15, ++ ++ ARGON2_LANES_TOO_FEW = -16, ++ ARGON2_LANES_TOO_MANY = -17, ++ ++ ARGON2_PWD_PTR_MISMATCH = -18, /* NULL ptr with non-zero length */ ++ ARGON2_SALT_PTR_MISMATCH = -19, /* NULL ptr with non-zero length */ ++ ARGON2_SECRET_PTR_MISMATCH = -20, /* NULL ptr with non-zero length */ ++ ARGON2_AD_PTR_MISMATCH = -21, /* NULL ptr with non-zero length */ ++ ++ ARGON2_MEMORY_ALLOCATION_ERROR = -22, ++ ++ ARGON2_FREE_MEMORY_CBK_NULL = -23, ++ ARGON2_ALLOCATE_MEMORY_CBK_NULL = -24, ++ ++ ARGON2_INCORRECT_PARAMETER = -25, ++ ARGON2_INCORRECT_TYPE = -26, ++ ++ ARGON2_OUT_PTR_MISMATCH = -27, ++ ++ ARGON2_THREADS_TOO_FEW = -28, ++ ARGON2_THREADS_TOO_MANY = -29, ++ ++ ARGON2_MISSING_ARGS = -30, ++ ++ ARGON2_ENCODING_FAIL = -31, ++ ++ ARGON2_DECODING_FAIL = -32, ++ ++ ARGON2_THREAD_FAIL = -33, ++ ++ ARGON2_DECODING_LENGTH_FAIL = -34, ++ ++ ARGON2_VERIFY_MISMATCH = -35 ++} argon2_error_codes; ++ ++/* Memory allocator types --- for external allocation */ ++typedef int (*allocate_fptr)(grub_uint8_t **memory, grub_size_t bytes_to_allocate); ++typedef void (*deallocate_fptr)(grub_uint8_t *memory, grub_size_t bytes_to_allocate); ++ ++/* Argon2 external data structures */ ++ ++/* ++ ***** ++ * Context: structure to hold Argon2 inputs: ++ * output array and its length, ++ * password and its length, ++ * salt and its length, ++ * secret and its length, ++ * associated data and its length, ++ * number of passes, amount of used memory (in KBytes, can be rounded up a bit) ++ * number of parallel threads that will be run. ++ * All the parameters above affect the output hash value. ++ * Additionally, two function pointers can be provided to allocate and ++ * deallocate the memory (if NULL, memory will be allocated internally). ++ * Also, three flags indicate whether to erase password, secret as soon as they ++ * are pre-hashed (and thus not needed anymore), and the entire memory ++ ***** ++ * Simplest situation: you have output array out[8], password is stored in ++ * pwd[32], salt is stored in salt[16], you do not have keys nor associated ++ * data. You need to spend 1 GB of RAM and you run 5 passes of Argon2d with ++ * 4 parallel lanes. ++ * You want to erase the password, but you're OK with last pass not being ++ * erased. You want to use the default memory allocator. ++ * Then you initialize: ++ Argon2_Context(out,8,pwd,32,salt,16,NULL,0,NULL,0,5,1<<20,4,4,NULL,NULL,true,false,false,false) ++ */ ++typedef struct Argon2_Context { ++ grub_uint8_t *out; /* output array */ ++ grub_uint32_t outlen; /* digest length */ ++ ++ grub_uint8_t *pwd; /* password array */ ++ grub_uint32_t pwdlen; /* password length */ ++ ++ grub_uint8_t *salt; /* salt array */ ++ grub_uint32_t saltlen; /* salt length */ ++ ++ grub_uint8_t *secret; /* key array */ ++ grub_uint32_t secretlen; /* key length */ ++ ++ grub_uint8_t *ad; /* associated data array */ ++ grub_uint32_t adlen; /* associated data length */ ++ ++ grub_uint32_t t_cost; /* number of passes */ ++ grub_uint32_t m_cost; /* amount of memory requested (KB) */ ++ grub_uint32_t lanes; /* number of lanes */ ++ grub_uint32_t threads; /* maximum number of threads */ ++ ++ grub_uint32_t version; /* version number */ ++ ++ allocate_fptr allocate_cbk; /* pointer to memory allocator */ ++ deallocate_fptr grub_free_cbk; /* pointer to memory deallocator */ ++ ++ grub_uint32_t flags; /* array of bool options */ ++} argon2_context; ++ ++/* Argon2 primitive type */ ++typedef enum Argon2_type { ++ Argon2_d = 0, ++ Argon2_i = 1, ++ Argon2_id = 2 ++} argon2_type; ++ ++/* Version of the algorithm */ ++typedef enum Argon2_version { ++ ARGON2_VERSION_10 = 0x10, ++ ARGON2_VERSION_13 = 0x13, ++ ARGON2_VERSION_NUMBER = ARGON2_VERSION_13 ++} argon2_version; ++ ++/** ++ * Hashes a password with Argon2, producing a raw hash at @hash ++ * @param t_cost Number of iterations ++ * @param m_cost Sets memory usage to m_cost kibibytes ++ * @param parallelism Number of threads and compute lanes ++ * @param pwd Pointer to password ++ * @param pwdlen Password size in bytes ++ * @param salt Pointer to salt ++ * @param saltlen Salt size in bytes ++ * @param hash Buffer where to write the raw hash - updated by the function ++ * @param hashlen Desired length of the hash in bytes ++ * @pre Different parallelism levels will give different results ++ * @pre Returns ARGON2_OK if successful ++ */ ++ARGON2_PUBLIC int argon2_hash(const grub_uint32_t t_cost, const grub_uint32_t m_cost, ++ const grub_uint32_t parallelism, const void *pwd, ++ const grub_size_t pwdlen, const void *salt, ++ const grub_size_t saltlen, void *hash, ++ const grub_size_t hashlen, argon2_type type, ++ const grub_uint32_t version); ++ ++/** ++ * Get the associated error message for given error code ++ * @return The error message associated with the given error code ++ */ ++ARGON2_PUBLIC const char *argon2_error_message(int error_code); ++ ++#if defined(__cplusplus) ++} ++#endif ++ ++#endif +diff --git a/grub-core/lib/argon2/blake2/blake2-impl.h b/grub-core/lib/argon2/blake2/blake2-impl.h +new file mode 100644 +index 000000000..3a795680b +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blake2-impl.h +@@ -0,0 +1,151 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef PORTABLE_BLAKE2_IMPL_H ++#define PORTABLE_BLAKE2_IMPL_H ++ ++#if defined(_MSC_VER) ++#define BLAKE2_INLINE __inline ++#elif defined(__GNUC__) || defined(__clang__) ++#define BLAKE2_INLINE __inline__ ++#else ++#define BLAKE2_INLINE ++#endif ++ ++/* Argon2 Team - Begin Code */ ++/* ++ Not an exhaustive list, but should cover the majority of modern platforms ++ Additionally, the code will always be correct---this is only a performance ++ tweak. ++*/ ++#if (defined(__BYTE_ORDER__) && \ ++ (__BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)) || \ ++ defined(__LITTLE_ENDIAN__) || defined(__ARMEL__) || defined(__MIPSEL__) || \ ++ defined(__AARCH64EL__) || defined(__amd64__) || defined(__i386__) || \ ++ defined(_M_IX86) || defined(_M_X64) || defined(_M_AMD64) || \ ++ defined(_M_ARM) ++#define NATIVE_LITTLE_ENDIAN ++#endif ++/* Argon2 Team - End Code */ ++ ++static BLAKE2_INLINE grub_uint32_t load32(const void *src) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_uint32_t w; ++ grub_memcpy(&w, src, sizeof w); ++ return w; ++#else ++ const grub_uint8_t *p = (const grub_uint8_t *)src; ++ grub_uint32_t w = *p++; ++ w |= (grub_uint32_t)(*p++) << 8; ++ w |= (grub_uint32_t)(*p++) << 16; ++ w |= (grub_uint32_t)(*p++) << 24; ++ return w; ++#endif ++} ++ ++static BLAKE2_INLINE grub_uint64_t load64(const void *src) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_uint64_t w; ++ grub_memcpy(&w, src, sizeof w); ++ return w; ++#else ++ const grub_uint8_t *p = (const grub_uint8_t *)src; ++ grub_uint64_t w = *p++; ++ w |= (grub_uint64_t)(*p++) << 8; ++ w |= (grub_uint64_t)(*p++) << 16; ++ w |= (grub_uint64_t)(*p++) << 24; ++ w |= (grub_uint64_t)(*p++) << 32; ++ w |= (grub_uint64_t)(*p++) << 40; ++ w |= (grub_uint64_t)(*p++) << 48; ++ w |= (grub_uint64_t)(*p++) << 56; ++ return w; ++#endif ++} ++ ++static BLAKE2_INLINE void store32(void *dst, grub_uint32_t w) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_memcpy(dst, &w, sizeof w); ++#else ++ grub_uint8_t *p = (grub_uint8_t *)dst; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++#endif ++} ++ ++static BLAKE2_INLINE void store64(void *dst, grub_uint64_t w) { ++#if defined(NATIVE_LITTLE_ENDIAN) ++ grub_memcpy(dst, &w, sizeof w); ++#else ++ grub_uint8_t *p = (grub_uint8_t *)dst; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++#endif ++} ++ ++static BLAKE2_INLINE grub_uint64_t load48(const void *src) { ++ const grub_uint8_t *p = (const grub_uint8_t *)src; ++ grub_uint64_t w = *p++; ++ w |= (grub_uint64_t)(*p++) << 8; ++ w |= (grub_uint64_t)(*p++) << 16; ++ w |= (grub_uint64_t)(*p++) << 24; ++ w |= (grub_uint64_t)(*p++) << 32; ++ w |= (grub_uint64_t)(*p++) << 40; ++ return w; ++} ++ ++static BLAKE2_INLINE void store48(void *dst, grub_uint64_t w) { ++ grub_uint8_t *p = (grub_uint8_t *)dst; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++ w >>= 8; ++ *p++ = (grub_uint8_t)w; ++} ++ ++static BLAKE2_INLINE grub_uint32_t rotr32(const grub_uint32_t w, const unsigned c) { ++ return (w >> c) | (w << (32 - c)); ++} ++ ++static BLAKE2_INLINE grub_uint64_t rotr64(const grub_uint64_t w, const unsigned c) { ++ return (w >> c) | (w << (64 - c)); ++} ++ ++#endif +diff --git a/grub-core/lib/argon2/blake2/blake2.h b/grub-core/lib/argon2/blake2/blake2.h +new file mode 100644 +index 000000000..4e8efeb22 +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blake2.h +@@ -0,0 +1,89 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef PORTABLE_BLAKE2_H ++#define PORTABLE_BLAKE2_H ++ ++#include "../argon2.h" ++ ++#if defined(__cplusplus) ++extern "C" { ++#endif ++ ++enum blake2b_constant { ++ BLAKE2B_BLOCKBYTES = 128, ++ BLAKE2B_OUTBYTES = 64, ++ BLAKE2B_KEYBYTES = 64, ++ BLAKE2B_SALTBYTES = 16, ++ BLAKE2B_PERSONALBYTES = 16 ++}; ++ ++#pragma pack(push, 1) ++typedef struct __blake2b_param { ++ grub_uint8_t digest_length; /* 1 */ ++ grub_uint8_t key_length; /* 2 */ ++ grub_uint8_t fanout; /* 3 */ ++ grub_uint8_t depth; /* 4 */ ++ grub_uint32_t leaf_length; /* 8 */ ++ grub_uint64_t node_offset; /* 16 */ ++ grub_uint8_t node_depth; /* 17 */ ++ grub_uint8_t inner_length; /* 18 */ ++ grub_uint8_t reserved[14]; /* 32 */ ++ grub_uint8_t salt[BLAKE2B_SALTBYTES]; /* 48 */ ++ grub_uint8_t personal[BLAKE2B_PERSONALBYTES]; /* 64 */ ++} blake2b_param; ++#pragma pack(pop) ++ ++typedef struct __blake2b_state { ++ grub_uint64_t h[8]; ++ grub_uint64_t t[2]; ++ grub_uint64_t f[2]; ++ grub_uint8_t buf[BLAKE2B_BLOCKBYTES]; ++ unsigned buflen; ++ unsigned outlen; ++ grub_uint8_t last_node; ++} blake2b_state; ++ ++/* Ensure param structs have not been wrongly padded */ ++/* Poor man's static_assert */ ++enum { ++ blake2_size_check_0 = 1 / !!(GRUB_CHAR_BIT == 8), ++ blake2_size_check_2 = ++ 1 / !!(sizeof(blake2b_param) == sizeof(grub_uint64_t) * GRUB_CHAR_BIT) ++}; ++ ++/* Streaming API */ ++ARGON2_LOCAL int blake2b_init(blake2b_state *S, grub_size_t outlen); ++ARGON2_LOCAL int blake2b_init_key(blake2b_state *S, grub_size_t outlen, const void *key, ++ grub_size_t keylen); ++ARGON2_LOCAL int blake2b_init_param(blake2b_state *S, const blake2b_param *P); ++ARGON2_LOCAL int blake2b_update(blake2b_state *S, const void *in, grub_size_t inlen); ++ARGON2_LOCAL int blake2b_final(blake2b_state *S, void *out, grub_size_t outlen); ++ ++/* Simple API */ ++ARGON2_LOCAL int blake2b(void *out, grub_size_t outlen, const void *in, grub_size_t inlen, ++ const void *key, grub_size_t keylen); ++ ++/* Argon2 Team - Begin Code */ ++ARGON2_LOCAL int blake2b_long(void *out, grub_size_t outlen, const void *in, grub_size_t inlen); ++/* Argon2 Team - End Code */ ++ ++#if defined(__cplusplus) ++} ++#endif ++ ++#endif +diff --git a/grub-core/lib/argon2/blake2/blake2b.c b/grub-core/lib/argon2/blake2/blake2b.c +new file mode 100644 +index 000000000..53abd7bef +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blake2b.c +@@ -0,0 +1,388 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#include "blake2.h" ++#include "blake2-impl.h" ++ ++static const grub_uint64_t blake2b_IV[8] = { ++ GRUB_UINT64_C(0x6a09e667f3bcc908), GRUB_UINT64_C(0xbb67ae8584caa73b), ++ GRUB_UINT64_C(0x3c6ef372fe94f82b), GRUB_UINT64_C(0xa54ff53a5f1d36f1), ++ GRUB_UINT64_C(0x510e527fade682d1), GRUB_UINT64_C(0x9b05688c2b3e6c1f), ++ GRUB_UINT64_C(0x1f83d9abfb41bd6b), GRUB_UINT64_C(0x5be0cd19137e2179)}; ++ ++static const unsigned int blake2b_sigma[12][16] = { ++ {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, ++ {14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3}, ++ {11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4}, ++ {7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8}, ++ {9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13}, ++ {2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9}, ++ {12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11}, ++ {13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10}, ++ {6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5}, ++ {10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0}, ++ {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, ++ {14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3}, ++}; ++ ++void clear_internal_memory(void *v, grub_size_t n); ++ ++static BLAKE2_INLINE void blake2b_set_lastnode(blake2b_state *S) { ++ S->f[1] = (grub_uint64_t)-1; ++} ++ ++static BLAKE2_INLINE void blake2b_set_lastblock(blake2b_state *S) { ++ if (S->last_node) { ++ blake2b_set_lastnode(S); ++ } ++ S->f[0] = (grub_uint64_t)-1; ++} ++ ++static BLAKE2_INLINE void blake2b_increment_counter(blake2b_state *S, ++ grub_uint64_t inc) { ++ S->t[0] += inc; ++ S->t[1] += (S->t[0] < inc); ++} ++ ++static BLAKE2_INLINE void blake2b_invalidate_state(blake2b_state *S) { ++ clear_internal_memory(S, sizeof(*S)); /* wipe */ ++ blake2b_set_lastblock(S); /* invalidate for further use */ ++} ++ ++static BLAKE2_INLINE void blake2b_init0(blake2b_state *S) { ++ grub_memset(S, 0, sizeof(*S)); ++ grub_memcpy(S->h, blake2b_IV, sizeof(S->h)); ++} ++ ++int blake2b_init_param(blake2b_state *S, const blake2b_param *P) { ++ const unsigned char *p = (const unsigned char *)P; ++ unsigned int i; ++ ++ if (NULL == P || NULL == S) { ++ return -1; ++ } ++ ++ blake2b_init0(S); ++ /* IV XOR Parameter Block */ ++ for (i = 0; i < 8; ++i) { ++ S->h[i] ^= load64(&p[i * sizeof(S->h[i])]); ++ } ++ S->outlen = P->digest_length; ++ return 0; ++} ++ ++/* Sequential blake2b initialization */ ++int blake2b_init(blake2b_state *S, grub_size_t outlen) { ++ blake2b_param P; ++ ++ if (S == NULL) { ++ return -1; ++ } ++ ++ if ((outlen == 0) || (outlen > BLAKE2B_OUTBYTES)) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ /* Setup Parameter Block for unkeyed BLAKE2 */ ++ P.digest_length = (grub_uint8_t)outlen; ++ P.key_length = 0; ++ P.fanout = 1; ++ P.depth = 1; ++ P.leaf_length = 0; ++ P.node_offset = 0; ++ P.node_depth = 0; ++ P.inner_length = 0; ++ grub_memset(P.reserved, 0, sizeof(P.reserved)); ++ grub_memset(P.salt, 0, sizeof(P.salt)); ++ grub_memset(P.personal, 0, sizeof(P.personal)); ++ ++ return blake2b_init_param(S, &P); ++} ++ ++int blake2b_init_key(blake2b_state *S, grub_size_t outlen, const void *key, ++ grub_size_t keylen) { ++ blake2b_param P; ++ ++ if (S == NULL) { ++ return -1; ++ } ++ ++ if ((outlen == 0) || (outlen > BLAKE2B_OUTBYTES)) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ if ((key == 0) || (keylen == 0) || (keylen > BLAKE2B_KEYBYTES)) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ /* Setup Parameter Block for keyed BLAKE2 */ ++ P.digest_length = (grub_uint8_t)outlen; ++ P.key_length = (grub_uint8_t)keylen; ++ P.fanout = 1; ++ P.depth = 1; ++ P.leaf_length = 0; ++ P.node_offset = 0; ++ P.node_depth = 0; ++ P.inner_length = 0; ++ grub_memset(P.reserved, 0, sizeof(P.reserved)); ++ grub_memset(P.salt, 0, sizeof(P.salt)); ++ grub_memset(P.personal, 0, sizeof(P.personal)); ++ ++ if (blake2b_init_param(S, &P) < 0) { ++ blake2b_invalidate_state(S); ++ return -1; ++ } ++ ++ { ++ grub_uint8_t block[BLAKE2B_BLOCKBYTES]; ++ grub_memset(block, 0, BLAKE2B_BLOCKBYTES); ++ grub_memcpy(block, key, keylen); ++ blake2b_update(S, block, BLAKE2B_BLOCKBYTES); ++ /* Burn the key from stack */ ++ clear_internal_memory(block, BLAKE2B_BLOCKBYTES); ++ } ++ return 0; ++} ++ ++static void blake2b_compress(blake2b_state *S, const grub_uint8_t *block) { ++ grub_uint64_t m[16]; ++ grub_uint64_t v[16]; ++ unsigned int i, r; ++ ++ for (i = 0; i < 16; ++i) { ++ m[i] = load64(block + i * sizeof(m[i])); ++ } ++ ++ for (i = 0; i < 8; ++i) { ++ v[i] = S->h[i]; ++ } ++ ++ v[8] = blake2b_IV[0]; ++ v[9] = blake2b_IV[1]; ++ v[10] = blake2b_IV[2]; ++ v[11] = blake2b_IV[3]; ++ v[12] = blake2b_IV[4] ^ S->t[0]; ++ v[13] = blake2b_IV[5] ^ S->t[1]; ++ v[14] = blake2b_IV[6] ^ S->f[0]; ++ v[15] = blake2b_IV[7] ^ S->f[1]; ++ ++#define G(r, i, a, b, c, d) \ ++ do { \ ++ a = a + b + m[blake2b_sigma[r][2 * i + 0]]; \ ++ d = rotr64(d ^ a, 32); \ ++ c = c + d; \ ++ b = rotr64(b ^ c, 24); \ ++ a = a + b + m[blake2b_sigma[r][2 * i + 1]]; \ ++ d = rotr64(d ^ a, 16); \ ++ c = c + d; \ ++ b = rotr64(b ^ c, 63); \ ++ } while ((void)0, 0) ++ ++#define ROUND(r) \ ++ do { \ ++ G(r, 0, v[0], v[4], v[8], v[12]); \ ++ G(r, 1, v[1], v[5], v[9], v[13]); \ ++ G(r, 2, v[2], v[6], v[10], v[14]); \ ++ G(r, 3, v[3], v[7], v[11], v[15]); \ ++ G(r, 4, v[0], v[5], v[10], v[15]); \ ++ G(r, 5, v[1], v[6], v[11], v[12]); \ ++ G(r, 6, v[2], v[7], v[8], v[13]); \ ++ G(r, 7, v[3], v[4], v[9], v[14]); \ ++ } while ((void)0, 0) ++ ++ for (r = 0; r < 12; ++r) { ++ ROUND(r); ++ } ++ ++ for (i = 0; i < 8; ++i) { ++ S->h[i] = S->h[i] ^ v[i] ^ v[i + 8]; ++ } ++ ++#undef G ++#undef ROUND ++} ++ ++int blake2b_update(blake2b_state *S, const void *in, grub_size_t inlen) { ++ const grub_uint8_t *pin = (const grub_uint8_t *)in; ++ ++ if (inlen == 0) { ++ return 0; ++ } ++ ++ /* Sanity check */ ++ if (S == NULL || in == NULL) { ++ return -1; ++ } ++ ++ /* Is this a reused state? */ ++ if (S->f[0] != 0) { ++ return -1; ++ } ++ ++ if (S->buflen + inlen > BLAKE2B_BLOCKBYTES) { ++ /* Complete current block */ ++ grub_size_t left = S->buflen; ++ grub_size_t fill = BLAKE2B_BLOCKBYTES - left; ++ grub_memcpy(&S->buf[left], pin, fill); ++ blake2b_increment_counter(S, BLAKE2B_BLOCKBYTES); ++ blake2b_compress(S, S->buf); ++ S->buflen = 0; ++ inlen -= fill; ++ pin += fill; ++ /* Avoid buffer copies when possible */ ++ while (inlen > BLAKE2B_BLOCKBYTES) { ++ blake2b_increment_counter(S, BLAKE2B_BLOCKBYTES); ++ blake2b_compress(S, pin); ++ inlen -= BLAKE2B_BLOCKBYTES; ++ pin += BLAKE2B_BLOCKBYTES; ++ } ++ } ++ grub_memcpy(&S->buf[S->buflen], pin, inlen); ++ S->buflen += (unsigned int)inlen; ++ return 0; ++} ++ ++int blake2b_final(blake2b_state *S, void *out, grub_size_t outlen) { ++ grub_uint8_t buffer[BLAKE2B_OUTBYTES] = {0}; ++ unsigned int i; ++ ++ /* Sanity checks */ ++ if (S == NULL || out == NULL || outlen < S->outlen) { ++ return -1; ++ } ++ ++ /* Is this a reused state? */ ++ if (S->f[0] != 0) { ++ return -1; ++ } ++ ++ blake2b_increment_counter(S, S->buflen); ++ blake2b_set_lastblock(S); ++ grub_memset(&S->buf[S->buflen], 0, BLAKE2B_BLOCKBYTES - S->buflen); /* Padding */ ++ blake2b_compress(S, S->buf); ++ ++ for (i = 0; i < 8; ++i) { /* Output full hash to temp buffer */ ++ store64(buffer + sizeof(S->h[i]) * i, S->h[i]); ++ } ++ ++ grub_memcpy(out, buffer, S->outlen); ++ clear_internal_memory(buffer, sizeof(buffer)); ++ clear_internal_memory(S->buf, sizeof(S->buf)); ++ clear_internal_memory(S->h, sizeof(S->h)); ++ return 0; ++} ++ ++int blake2b(void *out, grub_size_t outlen, const void *in, grub_size_t inlen, ++ const void *key, grub_size_t keylen) { ++ blake2b_state S; ++ int ret = -1; ++ ++ /* Verify parameters */ ++ if (NULL == in && inlen > 0) { ++ goto fail; ++ } ++ ++ if (NULL == out || outlen == 0 || outlen > BLAKE2B_OUTBYTES) { ++ goto fail; ++ } ++ ++ if ((NULL == key && keylen > 0) || keylen > BLAKE2B_KEYBYTES) { ++ goto fail; ++ } ++ ++ if (keylen > 0) { ++ if (blake2b_init_key(&S, outlen, key, keylen) < 0) { ++ goto fail; ++ } ++ } else { ++ if (blake2b_init(&S, outlen) < 0) { ++ goto fail; ++ } ++ } ++ ++ if (blake2b_update(&S, in, inlen) < 0) { ++ goto fail; ++ } ++ ret = blake2b_final(&S, out, outlen); ++ ++fail: ++ clear_internal_memory(&S, sizeof(S)); ++ return ret; ++} ++ ++/* Argon2 Team - Begin Code */ ++int blake2b_long(void *pout, grub_size_t outlen, const void *in, grub_size_t inlen) { ++ grub_uint8_t *out = (grub_uint8_t *)pout; ++ blake2b_state blake_state; ++ grub_uint8_t outlen_bytes[sizeof(grub_uint32_t)] = {0}; ++ int ret = -1; ++ ++ if (outlen > GRUB_UINT32_MAX) { ++ goto fail; ++ } ++ ++ /* Ensure little-endian byte order! */ ++ store32(outlen_bytes, (grub_uint32_t)outlen); ++ ++#define TRY(statement) \ ++ do { \ ++ ret = statement; \ ++ if (ret < 0) { \ ++ goto fail; \ ++ } \ ++ } while ((void)0, 0) ++ ++ if (outlen <= BLAKE2B_OUTBYTES) { ++ TRY(blake2b_init(&blake_state, outlen)); ++ TRY(blake2b_update(&blake_state, outlen_bytes, sizeof(outlen_bytes))); ++ TRY(blake2b_update(&blake_state, in, inlen)); ++ TRY(blake2b_final(&blake_state, out, outlen)); ++ } else { ++ grub_uint32_t toproduce; ++ grub_uint8_t out_buffer[BLAKE2B_OUTBYTES]; ++ grub_uint8_t in_buffer[BLAKE2B_OUTBYTES]; ++ TRY(blake2b_init(&blake_state, BLAKE2B_OUTBYTES)); ++ TRY(blake2b_update(&blake_state, outlen_bytes, sizeof(outlen_bytes))); ++ TRY(blake2b_update(&blake_state, in, inlen)); ++ TRY(blake2b_final(&blake_state, out_buffer, BLAKE2B_OUTBYTES)); ++ grub_memcpy(out, out_buffer, BLAKE2B_OUTBYTES / 2); ++ out += BLAKE2B_OUTBYTES / 2; ++ toproduce = (grub_uint32_t)outlen - BLAKE2B_OUTBYTES / 2; ++ ++ while (toproduce > BLAKE2B_OUTBYTES) { ++ grub_memcpy(in_buffer, out_buffer, BLAKE2B_OUTBYTES); ++ TRY(blake2b(out_buffer, BLAKE2B_OUTBYTES, in_buffer, ++ BLAKE2B_OUTBYTES, NULL, 0)); ++ grub_memcpy(out, out_buffer, BLAKE2B_OUTBYTES / 2); ++ out += BLAKE2B_OUTBYTES / 2; ++ toproduce -= BLAKE2B_OUTBYTES / 2; ++ } ++ ++ grub_memcpy(in_buffer, out_buffer, BLAKE2B_OUTBYTES); ++ TRY(blake2b(out_buffer, toproduce, in_buffer, BLAKE2B_OUTBYTES, NULL, ++ 0)); ++ grub_memcpy(out, out_buffer, toproduce); ++ } ++fail: ++ clear_internal_memory(&blake_state, sizeof(blake_state)); ++ return ret; ++#undef TRY ++} ++/* Argon2 Team - End Code */ +diff --git a/grub-core/lib/argon2/blake2/blamka-round-ref.h b/grub-core/lib/argon2/blake2/blamka-round-ref.h +new file mode 100644 +index 000000000..7f0071ada +--- /dev/null ++++ b/grub-core/lib/argon2/blake2/blamka-round-ref.h +@@ -0,0 +1,56 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef BLAKE_ROUND_MKA_H ++#define BLAKE_ROUND_MKA_H ++ ++#include "blake2.h" ++#include "blake2-impl.h" ++ ++/* designed by the Lyra PHC team */ ++static BLAKE2_INLINE grub_uint64_t fBlaMka(grub_uint64_t x, grub_uint64_t y) { ++ const grub_uint64_t m = GRUB_UINT64_C(0xFFFFFFFF); ++ const grub_uint64_t xy = (x & m) * (y & m); ++ return x + y + 2 * xy; ++} ++ ++#define G(a, b, c, d) \ ++ do { \ ++ a = fBlaMka(a, b); \ ++ d = rotr64(d ^ a, 32); \ ++ c = fBlaMka(c, d); \ ++ b = rotr64(b ^ c, 24); \ ++ a = fBlaMka(a, b); \ ++ d = rotr64(d ^ a, 16); \ ++ c = fBlaMka(c, d); \ ++ b = rotr64(b ^ c, 63); \ ++ } while ((void)0, 0) ++ ++#define BLAKE2_ROUND_NOMSG(v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, \ ++ v12, v13, v14, v15) \ ++ do { \ ++ G(v0, v4, v8, v12); \ ++ G(v1, v5, v9, v13); \ ++ G(v2, v6, v10, v14); \ ++ G(v3, v7, v11, v15); \ ++ G(v0, v5, v10, v15); \ ++ G(v1, v6, v11, v12); \ ++ G(v2, v7, v8, v13); \ ++ G(v3, v4, v9, v14); \ ++ } while ((void)0, 0) ++ ++#endif +diff --git a/grub-core/lib/argon2/core.c b/grub-core/lib/argon2/core.c +new file mode 100644 +index 000000000..0fe5b74cb +--- /dev/null ++++ b/grub-core/lib/argon2/core.c +@@ -0,0 +1,506 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++/*For memory wiping*/ ++#ifdef _MSC_VER ++#include <windows.h> ++#include <winbase.h> /* For SecureZeroMemory */ ++#endif ++#if defined __STDC_LIB_EXT1__ ++#define __STDC_WANT_LIB_EXT1__ 1 ++#endif ++#define VC_GE_2005(version) (version >= 1400) ++ ++#include "core.h" ++#include "blake2/blake2.h" ++#include "blake2/blake2-impl.h" ++ ++#ifdef GENKAT ++#include "genkat.h" ++#endif ++ ++#if defined(__clang__) ++#if __has_attribute(optnone) ++#define NOT_OPTIMIZED __attribute__((optnone)) ++#endif ++#elif defined(__GNUC__) ++#define GCC_VERSION \ ++ (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) ++#if GCC_VERSION >= 40400 ++#define NOT_OPTIMIZED __attribute__((optimize("O0"))) ++#endif ++#endif ++#ifndef NOT_OPTIMIZED ++#define NOT_OPTIMIZED ++#endif ++ ++/***************Instance and Position constructors**********/ ++void init_block_value(block *b, grub_uint8_t in) { grub_memset(b->v, in, sizeof(b->v)); } ++ ++void copy_block(block *dst, const block *src) { ++ grub_memcpy(dst->v, src->v, sizeof(grub_uint64_t) * ARGON2_QWORDS_IN_BLOCK); ++} ++ ++void xor_block(block *dst, const block *src) { ++ int i; ++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) { ++ dst->v[i] ^= src->v[i]; ++ } ++} ++ ++static void load_block(block *dst, const void *input) { ++ unsigned i; ++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) { ++ dst->v[i] = load64((const grub_uint8_t *)input + i * sizeof(dst->v[i])); ++ } ++} ++ ++static void store_block(void *output, const block *src) { ++ unsigned i; ++ for (i = 0; i < ARGON2_QWORDS_IN_BLOCK; ++i) { ++ store64((grub_uint8_t *)output + i * sizeof(src->v[i]), src->v[i]); ++ } ++} ++ ++/***************Memory functions*****************/ ++ ++int allocate_memory(const argon2_context *context, grub_uint8_t **memory, ++ grub_size_t num, grub_size_t size) { ++ grub_size_t memory_size = num*size; ++ if (memory == NULL) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ /* 1. Check for multiplication overflow */ ++ if (size != 0 && memory_size / size != num) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ /* 2. Try to allocate with appropriate allocator */ ++ if (context->allocate_cbk) { ++ (context->allocate_cbk)(memory, memory_size); ++ } else { ++ *memory = grub_malloc(memory_size); ++ } ++ ++ if (*memory == NULL) { ++ return ARGON2_MEMORY_ALLOCATION_ERROR; ++ } ++ ++ return ARGON2_OK; ++} ++ ++void grub_free_memory(const argon2_context *context, grub_uint8_t *memory, ++ grub_size_t num, grub_size_t size) { ++ grub_size_t memory_size = num*size; ++ clear_internal_memory(memory, memory_size); ++ if (context->grub_free_cbk) { ++ (context->grub_free_cbk)(memory, memory_size); ++ } else { ++ grub_free(memory); ++ } ++} ++ ++void NOT_OPTIMIZED secure_wipe_memory(void *v, grub_size_t n) { ++ static void *(*const volatile grub_memset_sec)(void *, int, grub_size_t) = &grub_memset; ++ grub_memset_sec(v, 0, n); ++} ++ ++/* Memory clear flag defaults to true. */ ++int FLAG_clear_internal_memory = 1; ++void clear_internal_memory(void *v, grub_size_t n) { ++ if (FLAG_clear_internal_memory && v) { ++ secure_wipe_memory(v, n); ++ } ++} ++ ++void finalize(const argon2_context *context, argon2_instance_t *instance) { ++ if (context != NULL && instance != NULL) { ++ block blockhash; ++ grub_uint32_t l; ++ ++ copy_block(&blockhash, instance->memory + instance->lane_length - 1); ++ ++ /* XOR the last blocks */ ++ for (l = 1; l < instance->lanes; ++l) { ++ grub_uint32_t last_block_in_lane = ++ l * instance->lane_length + (instance->lane_length - 1); ++ xor_block(&blockhash, instance->memory + last_block_in_lane); ++ } ++ ++ /* Hash the result */ ++ { ++ grub_uint8_t blockhash_bytes[ARGON2_BLOCK_SIZE]; ++ store_block(blockhash_bytes, &blockhash); ++ blake2b_long(context->out, context->outlen, blockhash_bytes, ++ ARGON2_BLOCK_SIZE); ++ /* clear blockhash and blockhash_bytes */ ++ clear_internal_memory(blockhash.v, ARGON2_BLOCK_SIZE); ++ clear_internal_memory(blockhash_bytes, ARGON2_BLOCK_SIZE); ++ } ++ ++#ifdef GENKAT ++ print_tag(context->out, context->outlen); ++#endif ++ ++ grub_free_memory(context, (grub_uint8_t *)instance->memory, ++ instance->memory_blocks, sizeof(block)); ++ } ++} ++ ++grub_uint32_t index_alpha(const argon2_instance_t *instance, ++ const argon2_position_t *position, grub_uint32_t pseudo_rand, ++ int same_lane) { ++ /* ++ * Pass 0: ++ * This lane : all already finished segments plus already constructed ++ * blocks in this segment ++ * Other lanes : all already finished segments ++ * Pass 1+: ++ * This lane : (SYNC_POINTS - 1) last segments plus already constructed ++ * blocks in this segment ++ * Other lanes : (SYNC_POINTS - 1) last segments ++ */ ++ grub_uint32_t reference_area_size; ++ grub_uint64_t relative_position; ++ grub_uint64_t start_position, absolute_position; ++ ++ if (0 == position->pass) { ++ /* First pass */ ++ if (0 == position->slice) { ++ /* First slice */ ++ reference_area_size = ++ position->index - 1; /* all but the previous */ ++ } else { ++ if (same_lane) { ++ /* The same lane => add current segment */ ++ reference_area_size = ++ position->slice * instance->segment_length + ++ position->index - 1; ++ } else { ++ reference_area_size = ++ position->slice * instance->segment_length + ++ ((position->index == 0) ? (-1) : 0); ++ } ++ } ++ } else { ++ /* Second pass */ ++ if (same_lane) { ++ reference_area_size = instance->lane_length - ++ instance->segment_length + position->index - ++ 1; ++ } else { ++ reference_area_size = instance->lane_length - ++ instance->segment_length + ++ ((position->index == 0) ? (-1) : 0); ++ } ++ } ++ ++ /* 1.2.4. Mapping pseudo_rand to 0..<reference_area_size-1> and produce ++ * relative position */ ++ relative_position = pseudo_rand; ++ relative_position = relative_position * relative_position >> 32; ++ relative_position = reference_area_size - 1 - ++ (reference_area_size * relative_position >> 32); ++ ++ /* 1.2.5 Computing starting position */ ++ start_position = 0; ++ ++ if (0 != position->pass) { ++ start_position = (position->slice == ARGON2_SYNC_POINTS - 1) ++ ? 0 ++ : (position->slice + 1) * instance->segment_length; ++ } ++ ++ /* 1.2.6. Computing absolute position */ ++ grub_divmod64 (start_position + relative_position, instance->lane_length, ++ &absolute_position); /* absolute position */ ++ return absolute_position; ++} ++ ++/* Single-threaded version for p=1 case */ ++static int fill_memory_blocks_st(argon2_instance_t *instance) { ++ grub_uint32_t r, s, l; ++ ++ for (r = 0; r < instance->passes; ++r) { ++ for (s = 0; s < ARGON2_SYNC_POINTS; ++s) { ++ for (l = 0; l < instance->lanes; ++l) { ++ argon2_position_t position = {r, l, (grub_uint8_t)s, 0}; ++ fill_segment(instance, position); ++ } ++ } ++#ifdef GENKAT ++ internal_kat(instance, r); /* Print all memory blocks */ ++#endif ++ } ++ return ARGON2_OK; ++} ++ ++int fill_memory_blocks(argon2_instance_t *instance) { ++ if (instance == NULL || instance->lanes == 0) { ++ return ARGON2_INCORRECT_PARAMETER; ++ } ++ return fill_memory_blocks_st(instance); ++} ++ ++int validate_inputs(const argon2_context *context) { ++ if (NULL == context) { ++ return ARGON2_INCORRECT_PARAMETER; ++ } ++ ++ if (NULL == context->out) { ++ return ARGON2_OUTPUT_PTR_NULL; ++ } ++ ++ /* Validate output length */ ++ if (ARGON2_MIN_OUTLEN > context->outlen) { ++ return ARGON2_OUTPUT_TOO_SHORT; ++ } ++ ++ if (ARGON2_MAX_OUTLEN < context->outlen) { ++ return ARGON2_OUTPUT_TOO_LONG; ++ } ++ ++ /* Validate password (required param) */ ++ if (NULL == context->pwd) { ++ if (0 != context->pwdlen) { ++ return ARGON2_PWD_PTR_MISMATCH; ++ } ++ } ++ ++ if (ARGON2_MAX_PWD_LENGTH < context->pwdlen) { ++ return ARGON2_PWD_TOO_LONG; ++ } ++ ++ /* Validate salt (required param) */ ++ if (NULL == context->salt) { ++ if (0 != context->saltlen) { ++ return ARGON2_SALT_PTR_MISMATCH; ++ } ++ } ++ ++ if (ARGON2_MIN_SALT_LENGTH > context->saltlen) { ++ return ARGON2_SALT_TOO_SHORT; ++ } ++ ++ if (ARGON2_MAX_SALT_LENGTH < context->saltlen) { ++ return ARGON2_SALT_TOO_LONG; ++ } ++ ++ /* Validate secret (optional param) */ ++ if (NULL == context->secret) { ++ if (0 != context->secretlen) { ++ return ARGON2_SECRET_PTR_MISMATCH; ++ } ++ } else { ++ if (ARGON2_MAX_SECRET < context->secretlen) { ++ return ARGON2_SECRET_TOO_LONG; ++ } ++ } ++ ++ /* Validate associated data (optional param) */ ++ if (NULL == context->ad) { ++ if (0 != context->adlen) { ++ return ARGON2_AD_PTR_MISMATCH; ++ } ++ } else { ++ if (ARGON2_MAX_AD_LENGTH < context->adlen) { ++ return ARGON2_AD_TOO_LONG; ++ } ++ } ++ ++ /* Validate memory cost */ ++ if (ARGON2_MIN_MEMORY > context->m_cost) { ++ return ARGON2_MEMORY_TOO_LITTLE; ++ } ++ ++ if (context->m_cost < 8 * context->lanes) { ++ return ARGON2_MEMORY_TOO_LITTLE; ++ } ++ ++ /* Validate time cost */ ++ if (ARGON2_MIN_TIME > context->t_cost) { ++ return ARGON2_TIME_TOO_SMALL; ++ } ++ ++ if (ARGON2_MAX_TIME < context->t_cost) { ++ return ARGON2_TIME_TOO_LARGE; ++ } ++ ++ /* Validate lanes */ ++ if (ARGON2_MIN_LANES > context->lanes) { ++ return ARGON2_LANES_TOO_FEW; ++ } ++ ++ if (ARGON2_MAX_LANES < context->lanes) { ++ return ARGON2_LANES_TOO_MANY; ++ } ++ ++ /* Validate threads */ ++ if (ARGON2_MIN_THREADS > context->threads) { ++ return ARGON2_THREADS_TOO_FEW; ++ } ++ ++ if (ARGON2_MAX_THREADS < context->threads) { ++ return ARGON2_THREADS_TOO_MANY; ++ } ++ ++ if (NULL != context->allocate_cbk && NULL == context->grub_free_cbk) { ++ return ARGON2_FREE_MEMORY_CBK_NULL; ++ } ++ ++ if (NULL == context->allocate_cbk && NULL != context->grub_free_cbk) { ++ return ARGON2_ALLOCATE_MEMORY_CBK_NULL; ++ } ++ ++ return ARGON2_OK; ++} ++ ++void fill_first_blocks(grub_uint8_t *blockhash, const argon2_instance_t *instance) { ++ grub_uint32_t l; ++ /* Make the first and second block in each lane as G(H0||0||i) or ++ G(H0||1||i) */ ++ grub_uint8_t blockhash_bytes[ARGON2_BLOCK_SIZE]; ++ for (l = 0; l < instance->lanes; ++l) { ++ ++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, 0); ++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH + 4, l); ++ blake2b_long(blockhash_bytes, ARGON2_BLOCK_SIZE, blockhash, ++ ARGON2_PREHASH_SEED_LENGTH); ++ load_block(&instance->memory[l * instance->lane_length + 0], ++ blockhash_bytes); ++ ++ store32(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, 1); ++ blake2b_long(blockhash_bytes, ARGON2_BLOCK_SIZE, blockhash, ++ ARGON2_PREHASH_SEED_LENGTH); ++ load_block(&instance->memory[l * instance->lane_length + 1], ++ blockhash_bytes); ++ } ++ clear_internal_memory(blockhash_bytes, ARGON2_BLOCK_SIZE); ++} ++ ++void initial_hash(grub_uint8_t *blockhash, argon2_context *context, ++ argon2_type type) { ++ blake2b_state BlakeHash; ++ grub_uint8_t value[sizeof(grub_uint32_t)]; ++ ++ if (NULL == context || NULL == blockhash) { ++ return; ++ } ++ ++ blake2b_init(&BlakeHash, ARGON2_PREHASH_DIGEST_LENGTH); ++ ++ store32(&value, context->lanes); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->outlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->m_cost); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->t_cost); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->version); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, (grub_uint32_t)type); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ store32(&value, context->pwdlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->pwd != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->pwd, ++ context->pwdlen); ++ ++ if (context->flags & ARGON2_FLAG_CLEAR_PASSWORD) { ++ secure_wipe_memory(context->pwd, context->pwdlen); ++ context->pwdlen = 0; ++ } ++ } ++ ++ store32(&value, context->saltlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->salt != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->salt, ++ context->saltlen); ++ } ++ ++ store32(&value, context->secretlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->secret != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->secret, ++ context->secretlen); ++ ++ if (context->flags & ARGON2_FLAG_CLEAR_SECRET) { ++ secure_wipe_memory(context->secret, context->secretlen); ++ context->secretlen = 0; ++ } ++ } ++ ++ store32(&value, context->adlen); ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)&value, sizeof(value)); ++ ++ if (context->ad != NULL) { ++ blake2b_update(&BlakeHash, (const grub_uint8_t *)context->ad, ++ context->adlen); ++ } ++ ++ blake2b_final(&BlakeHash, blockhash, ARGON2_PREHASH_DIGEST_LENGTH); ++} ++ ++int initialize(argon2_instance_t *instance, argon2_context *context) { ++ grub_uint8_t blockhash[ARGON2_PREHASH_SEED_LENGTH]; ++ int result = ARGON2_OK; ++ ++ if (instance == NULL || context == NULL) ++ return ARGON2_INCORRECT_PARAMETER; ++ instance->context_ptr = context; ++ ++ /* 1. Memory allocation */ ++ result = allocate_memory(context, (grub_uint8_t **)&(instance->memory), ++ instance->memory_blocks, sizeof(block)); ++ if (result != ARGON2_OK) { ++ return result; ++ } ++ ++ /* 2. Initial hashing */ ++ /* H_0 + 8 extra bytes to produce the first blocks */ ++ /* grub_uint8_t blockhash[ARGON2_PREHASH_SEED_LENGTH]; */ ++ /* Hashing all inputs */ ++ initial_hash(blockhash, context, instance->type); ++ /* Zeroing 8 extra bytes */ ++ clear_internal_memory(blockhash + ARGON2_PREHASH_DIGEST_LENGTH, ++ ARGON2_PREHASH_SEED_LENGTH - ++ ARGON2_PREHASH_DIGEST_LENGTH); ++ ++#ifdef GENKAT ++ initial_kat(blockhash, context, instance->type); ++#endif ++ ++ /* 3. Creating first blocks, we always have at least two blocks in a slice ++ */ ++ fill_first_blocks(blockhash, instance); ++ /* Clearing the hash */ ++ clear_internal_memory(blockhash, ARGON2_PREHASH_SEED_LENGTH); ++ ++ return ARGON2_OK; ++} +diff --git a/grub-core/lib/argon2/core.h b/grub-core/lib/argon2/core.h +new file mode 100644 +index 000000000..bbcd56998 +--- /dev/null ++++ b/grub-core/lib/argon2/core.h +@@ -0,0 +1,228 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#ifndef ARGON2_CORE_H ++#define ARGON2_CORE_H ++ ++#include "argon2.h" ++ ++#define CONST_CAST(x) (x)(grub_addr_t) ++ ++/**********************Argon2 internal constants*******************************/ ++ ++enum argon2_core_constants { ++ /* Memory block size in bytes */ ++ ARGON2_BLOCK_SIZE = 1024, ++ ARGON2_QWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 8, ++ ARGON2_OWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 16, ++ ARGON2_HWORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 32, ++ ARGON2_512BIT_WORDS_IN_BLOCK = ARGON2_BLOCK_SIZE / 64, ++ ++ /* Number of pseudo-random values generated by one call to Blake in Argon2i ++ to ++ generate reference block positions */ ++ ARGON2_ADDRESSES_IN_BLOCK = 128, ++ ++ /* Pre-hashing digest length and its extension*/ ++ ARGON2_PREHASH_DIGEST_LENGTH = 64, ++ ARGON2_PREHASH_SEED_LENGTH = 72 ++}; ++ ++/*************************Argon2 internal data types***********************/ ++ ++/* ++ * Structure for the (1KB) memory block implemented as 128 64-bit words. ++ * Memory blocks can be copied, XORed. Internal words can be accessed by [] (no ++ * bounds checking). ++ */ ++typedef struct block_ { grub_uint64_t v[ARGON2_QWORDS_IN_BLOCK]; } block; ++ ++/*****************Functions that work with the block******************/ ++ ++/* Initialize each byte of the block with @in */ ++void init_block_value(block *b, grub_uint8_t in); ++ ++/* Copy block @src to block @dst */ ++void copy_block(block *dst, const block *src); ++ ++/* XOR @src onto @dst bytewise */ ++void xor_block(block *dst, const block *src); ++ ++/* ++ * Argon2 instance: memory pointer, number of passes, amount of memory, type, ++ * and derived values. ++ * Used to evaluate the number and location of blocks to construct in each ++ * thread ++ */ ++typedef struct Argon2_instance_t { ++ block *memory; /* Memory pointer */ ++ grub_uint32_t version; ++ grub_uint32_t passes; /* Number of passes */ ++ grub_uint32_t memory_blocks; /* Number of blocks in memory */ ++ grub_uint32_t segment_length; ++ grub_uint32_t lane_length; ++ grub_uint32_t lanes; ++ grub_uint32_t threads; ++ argon2_type type; ++ int print_internals; /* whether to print the memory blocks */ ++ argon2_context *context_ptr; /* points back to original context */ ++} argon2_instance_t; ++ ++/* ++ * Argon2 position: where we construct the block right now. Used to distribute ++ * work between threads. ++ */ ++typedef struct Argon2_position_t { ++ grub_uint32_t pass; ++ grub_uint32_t lane; ++ grub_uint8_t slice; ++ grub_uint32_t index; ++} argon2_position_t; ++ ++/*Struct that holds the inputs for thread handling FillSegment*/ ++typedef struct Argon2_thread_data { ++ argon2_instance_t *instance_ptr; ++ argon2_position_t pos; ++} argon2_thread_data; ++ ++/*************************Argon2 core functions********************************/ ++ ++/* Allocates memory to the given pointer, uses the appropriate allocator as ++ * specified in the context. Total allocated memory is num*size. ++ * @param context argon2_context which specifies the allocator ++ * @param memory pointer to the pointer to the memory ++ * @param size the size in bytes for each element to be allocated ++ * @param num the number of elements to be allocated ++ * @return ARGON2_OK if @memory is a valid pointer and memory is allocated ++ */ ++int allocate_memory(const argon2_context *context, grub_uint8_t **memory, ++ grub_size_t num, grub_size_t size); ++ ++/* ++ * Frees memory at the given pointer, uses the appropriate deallocator as ++ * specified in the context. Also cleans the memory using clear_internal_memory. ++ * @param context argon2_context which specifies the deallocator ++ * @param memory pointer to buffer to be grub_freed ++ * @param size the size in bytes for each element to be deallocated ++ * @param num the number of elements to be deallocated ++ */ ++void grub_free_memory(const argon2_context *context, grub_uint8_t *memory, ++ grub_size_t num, grub_size_t size); ++ ++/* Function that securely cleans the memory. This ignores any flags set ++ * regarding clearing memory. Usually one just calls clear_internal_memory. ++ * @param mem Pointer to the memory ++ * @param s Memory size in bytes ++ */ ++void secure_wipe_memory(void *v, grub_size_t n); ++ ++/* Function that securely clears the memory if FLAG_clear_internal_memory is ++ * set. If the flag isn't set, this function does nothing. ++ * @param mem Pointer to the memory ++ * @param s Memory size in bytes ++ */ ++void clear_internal_memory(void *v, grub_size_t n); ++ ++/* ++ * Computes absolute position of reference block in the lane following a skewed ++ * distribution and using a pseudo-random value as input ++ * @param instance Pointer to the current instance ++ * @param position Pointer to the current position ++ * @param pseudo_rand 32-bit pseudo-random value used to determine the position ++ * @param same_lane Indicates if the block will be taken from the current lane. ++ * If so we can reference the current segment ++ * @pre All pointers must be valid ++ */ ++grub_uint32_t index_alpha(const argon2_instance_t *instance, ++ const argon2_position_t *position, grub_uint32_t pseudo_rand, ++ int same_lane); ++ ++/* ++ * Function that validates all inputs against predefined restrictions and return ++ * an error code ++ * @param context Pointer to current Argon2 context ++ * @return ARGON2_OK if everything is all right, otherwise one of error codes ++ * (all defined in <argon2.h> ++ */ ++int validate_inputs(const argon2_context *context); ++ ++/* ++ * Hashes all the inputs into @a blockhash[PREHASH_DIGEST_LENGTH], clears ++ * password and secret if needed ++ * @param context Pointer to the Argon2 internal structure containing memory ++ * pointer, and parameters for time and space requirements. ++ * @param blockhash Buffer for pre-hashing digest ++ * @param type Argon2 type ++ * @pre @a blockhash must have at least @a PREHASH_DIGEST_LENGTH bytes ++ * allocated ++ */ ++void initial_hash(grub_uint8_t *blockhash, argon2_context *context, ++ argon2_type type); ++ ++/* ++ * Function creates first 2 blocks per lane ++ * @param instance Pointer to the current instance ++ * @param blockhash Pointer to the pre-hashing digest ++ * @pre blockhash must point to @a PREHASH_SEED_LENGTH allocated values ++ */ ++void fill_first_blocks(grub_uint8_t *blockhash, const argon2_instance_t *instance); ++ ++/* ++ * Function allocates memory, hashes the inputs with Blake, and creates first ++ * two blocks. Returns the pointer to the main memory with 2 blocks per lane ++ * initialized ++ * @param context Pointer to the Argon2 internal structure containing memory ++ * pointer, and parameters for time and space requirements. ++ * @param instance Current Argon2 instance ++ * @return Zero if successful, -1 if memory failed to allocate. @context->state ++ * will be modified if successful. ++ */ ++int initialize(argon2_instance_t *instance, argon2_context *context); ++ ++/* ++ * XORing the last block of each lane, hashing it, making the tag. Deallocates ++ * the memory. ++ * @param context Pointer to current Argon2 context (use only the out parameters ++ * from it) ++ * @param instance Pointer to current instance of Argon2 ++ * @pre instance->state must point to necessary amount of memory ++ * @pre context->out must point to outlen bytes of memory ++ * @pre if context->grub_free_cbk is not NULL, it should point to a function that ++ * deallocates memory ++ */ ++void finalize(const argon2_context *context, argon2_instance_t *instance); ++ ++/* ++ * Function that fills the segment using previous segments also from other ++ * threads ++ * @param context current context ++ * @param instance Pointer to the current instance ++ * @param position Current position ++ * @pre all block pointers must be valid ++ */ ++void fill_segment(const argon2_instance_t *instance, ++ argon2_position_t position); ++ ++/* ++ * Function that fills the entire memory t_cost times based on the first two ++ * blocks in each lane ++ * @param instance Pointer to the current instance ++ * @return ARGON2_OK if successful, @context->state ++ */ ++int fill_memory_blocks(argon2_instance_t *instance); ++ ++#endif +diff --git a/grub-core/lib/argon2/ref.c b/grub-core/lib/argon2/ref.c +new file mode 100644 +index 000000000..c933df80d +--- /dev/null ++++ b/grub-core/lib/argon2/ref.c +@@ -0,0 +1,190 @@ ++/* ++ * Argon2 reference source code package - reference C implementations ++ * ++ * Copyright 2015 ++ * Daniel Dinu, Dmitry Khovratovich, Jean-Philippe Aumasson, and Samuel Neves ++ * ++ * You may use this work under the terms of a Creative Commons CC0 1.0 ++ * License/Waiver or the Apache Public License 2.0, at your option. The terms of ++ * these licenses can be found at: ++ * ++ * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 ++ * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0 ++ * ++ * You should have received a copy of both of these licenses along with this ++ * software. If not, they may be obtained at the above URLs. ++ */ ++ ++#include "argon2.h" ++#include "core.h" ++ ++#include "blake2/blamka-round-ref.h" ++#include "blake2/blake2-impl.h" ++#include "blake2/blake2.h" ++ ++ ++/* ++ * Function fills a new memory block and optionally XORs the old block over the new one. ++ * @next_block must be initialized. ++ * @param prev_block Pointer to the previous block ++ * @param ref_block Pointer to the reference block ++ * @param next_block Pointer to the block to be constructed ++ * @param with_xor Whether to XOR into the new block (1) or just overwrite (0) ++ * @pre all block pointers must be valid ++ */ ++static void fill_block(const block *prev_block, const block *ref_block, ++ block *next_block, int with_xor) { ++ block blockR, block_tmp; ++ unsigned i; ++ ++ copy_block(&blockR, ref_block); ++ xor_block(&blockR, prev_block); ++ copy_block(&block_tmp, &blockR); ++ /* Now blockR = ref_block + prev_block and block_tmp = ref_block + prev_block */ ++ if (with_xor) { ++ /* Saving the next block contents for XOR over: */ ++ xor_block(&block_tmp, next_block); ++ /* Now blockR = ref_block + prev_block and ++ block_tmp = ref_block + prev_block + next_block */ ++ } ++ ++ /* Apply Blake2 on columns of 64-bit words: (0,1,...,15) , then ++ (16,17,..31)... finally (112,113,...127) */ ++ for (i = 0; i < 8; ++i) { ++ BLAKE2_ROUND_NOMSG( ++ blockR.v[16 * i], blockR.v[16 * i + 1], blockR.v[16 * i + 2], ++ blockR.v[16 * i + 3], blockR.v[16 * i + 4], blockR.v[16 * i + 5], ++ blockR.v[16 * i + 6], blockR.v[16 * i + 7], blockR.v[16 * i + 8], ++ blockR.v[16 * i + 9], blockR.v[16 * i + 10], blockR.v[16 * i + 11], ++ blockR.v[16 * i + 12], blockR.v[16 * i + 13], blockR.v[16 * i + 14], ++ blockR.v[16 * i + 15]); ++ } ++ ++ /* Apply Blake2 on rows of 64-bit words: (0,1,16,17,...112,113), then ++ (2,3,18,19,...,114,115).. finally (14,15,30,31,...,126,127) */ ++ for (i = 0; i < 8; i++) { ++ BLAKE2_ROUND_NOMSG( ++ blockR.v[2 * i], blockR.v[2 * i + 1], blockR.v[2 * i + 16], ++ blockR.v[2 * i + 17], blockR.v[2 * i + 32], blockR.v[2 * i + 33], ++ blockR.v[2 * i + 48], blockR.v[2 * i + 49], blockR.v[2 * i + 64], ++ blockR.v[2 * i + 65], blockR.v[2 * i + 80], blockR.v[2 * i + 81], ++ blockR.v[2 * i + 96], blockR.v[2 * i + 97], blockR.v[2 * i + 112], ++ blockR.v[2 * i + 113]); ++ } ++ ++ copy_block(next_block, &block_tmp); ++ xor_block(next_block, &blockR); ++} ++ ++static void next_addresses(block *address_block, block *input_block, ++ const block *zero_block) { ++ input_block->v[6]++; ++ fill_block(zero_block, input_block, address_block, 0); ++ fill_block(zero_block, address_block, address_block, 0); ++} ++ ++void fill_segment(const argon2_instance_t *instance, ++ argon2_position_t position) { ++ block *ref_block = NULL, *curr_block = NULL; ++ block address_block, input_block, zero_block; ++ grub_uint64_t pseudo_rand, ref_index, ref_lane; ++ grub_uint32_t prev_offset, curr_offset; ++ grub_uint32_t starting_index; ++ grub_uint32_t i; ++ int data_independent_addressing; ++ ++ if (instance == NULL) { ++ return; ++ } ++ ++ data_independent_addressing = ++ (instance->type == Argon2_i) || ++ (instance->type == Argon2_id && (position.pass == 0) && ++ (position.slice < ARGON2_SYNC_POINTS / 2)); ++ ++ if (data_independent_addressing) { ++ init_block_value(&zero_block, 0); ++ init_block_value(&input_block, 0); ++ ++ input_block.v[0] = position.pass; ++ input_block.v[1] = position.lane; ++ input_block.v[2] = position.slice; ++ input_block.v[3] = instance->memory_blocks; ++ input_block.v[4] = instance->passes; ++ input_block.v[5] = instance->type; ++ } ++ ++ starting_index = 0; ++ ++ if ((0 == position.pass) && (0 == position.slice)) { ++ starting_index = 2; /* we have already generated the first two blocks */ ++ ++ /* Don't forget to generate the first block of addresses: */ ++ if (data_independent_addressing) { ++ next_addresses(&address_block, &input_block, &zero_block); ++ } ++ } ++ ++ /* Offset of the current block */ ++ curr_offset = position.lane * instance->lane_length + ++ position.slice * instance->segment_length + starting_index; ++ ++ if (0 == curr_offset % instance->lane_length) { ++ /* Last block in this lane */ ++ prev_offset = curr_offset + instance->lane_length - 1; ++ } else { ++ /* Previous block */ ++ prev_offset = curr_offset - 1; ++ } ++ ++ for (i = starting_index; i < instance->segment_length; ++ ++i, ++curr_offset, ++prev_offset) { ++ /*1.1 Rotating prev_offset if needed */ ++ if (curr_offset % instance->lane_length == 1) { ++ prev_offset = curr_offset - 1; ++ } ++ ++ /* 1.2 Computing the index of the reference block */ ++ /* 1.2.1 Taking pseudo-random value from the previous block */ ++ if (data_independent_addressing) { ++ if (i % ARGON2_ADDRESSES_IN_BLOCK == 0) { ++ next_addresses(&address_block, &input_block, &zero_block); ++ } ++ pseudo_rand = address_block.v[i % ARGON2_ADDRESSES_IN_BLOCK]; ++ } else { ++ pseudo_rand = instance->memory[prev_offset].v[0]; ++ } ++ ++ /* 1.2.2 Computing the lane of the reference block */ ++ grub_divmod64 (pseudo_rand >> 32, instance->lanes, &ref_lane); ++ ++ if ((position.pass == 0) && (position.slice == 0)) { ++ /* Can not reference other lanes yet */ ++ ref_lane = position.lane; ++ } ++ ++ /* 1.2.3 Computing the number of possible reference block within the ++ * lane. ++ */ ++ position.index = i; ++ ref_index = index_alpha(instance, &position, pseudo_rand & 0xFFFFFFFF, ++ ref_lane == position.lane); ++ ++ /* 2 Creating a new block */ ++ ref_block = ++ instance->memory + instance->lane_length * ref_lane + ref_index; ++ curr_block = instance->memory + curr_offset; ++ if (ARGON2_VERSION_10 == instance->version) { ++ /* version 1.2.1 and earlier: overwrite, not XOR */ ++ fill_block(instance->memory + prev_offset, ref_block, curr_block, 0); ++ } else { ++ if(0 == position.pass) { ++ fill_block(instance->memory + prev_offset, ref_block, ++ curr_block, 0); ++ } else { ++ fill_block(instance->memory + prev_offset, ref_block, ++ curr_block, 1); ++ } ++ } ++ } ++} +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch b/config/grub/xhci/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch new file mode 100644 index 00000000..5d56bd61 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0006-Error-on-missing-Argon2id-parameters.patch @@ -0,0 +1,58 @@ +From 0044d32121bf52c4547c6b3c78f12d7305f57e6b Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 4/6] Error on missing Argon2id parameters + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + grub-core/disk/luks2.c | 13 ++++++++----- + 1 file changed, 8 insertions(+), 5 deletions(-) + +diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c +index d5106402f..bc818ea69 100644 +--- a/grub-core/disk/luks2.c ++++ b/grub-core/disk/luks2.c +@@ -38,6 +38,7 @@ GRUB_MOD_LICENSE ("GPLv3+"); + enum grub_luks2_kdf_type + { + LUKS2_KDF_TYPE_ARGON2I, ++ LUKS2_KDF_TYPE_ARGON2ID, + LUKS2_KDF_TYPE_PBKDF2 + }; + typedef enum grub_luks2_kdf_type grub_luks2_kdf_type_t; +@@ -90,7 +91,7 @@ struct grub_luks2_keyslot + grub_int64_t time; + grub_int64_t memory; + grub_int64_t cpus; +- } argon2i; ++ } argon2; + struct + { + const char *hash; +@@ -160,10 +161,11 @@ luks2_parse_keyslot (grub_luks2_keyslot_t *out, const grub_json_t *keyslot) + return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing or invalid KDF"); + else if (!grub_strcmp (type, "argon2i") || !grub_strcmp (type, "argon2id")) + { +- out->kdf.type = LUKS2_KDF_TYPE_ARGON2I; +- if (grub_json_getint64 (&out->kdf.u.argon2i.time, &kdf, "time") || +- grub_json_getint64 (&out->kdf.u.argon2i.memory, &kdf, "memory") || +- grub_json_getint64 (&out->kdf.u.argon2i.cpus, &kdf, "cpus")) ++ out->kdf.type = !grub_strcmp (type, "argon2i") ++ ? LUKS2_KDF_TYPE_ARGON2I : LUKS2_KDF_TYPE_ARGON2ID; ++ if (grub_json_getint64 (&out->kdf.u.argon2.time, &kdf, "time") || ++ grub_json_getint64 (&out->kdf.u.argon2.memory, &kdf, "memory") || ++ grub_json_getint64 (&out->kdf.u.argon2.cpus, &kdf, "cpus")) + return grub_error (GRUB_ERR_BAD_ARGUMENT, "Missing Argon2i parameters"); + } + else if (!grub_strcmp (type, "pbkdf2")) +@@ -459,6 +461,7 @@ luks2_decrypt_key (grub_uint8_t *out_key, + switch (k->kdf.type) + { + case LUKS2_KDF_TYPE_ARGON2I: ++ case LUKS2_KDF_TYPE_ARGON2ID: + ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported"); + goto err; + case LUKS2_KDF_TYPE_PBKDF2: +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch b/config/grub/xhci/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch new file mode 100644 index 00000000..f2e26fd4 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0007-Compile-with-Argon2id-support.patch @@ -0,0 +1,83 @@ +From 0a21695c55f76f1c958bb633481d55b3168562f7 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 5/6] Compile with Argon2id support + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + Makefile.util.def | 6 +++++- + grub-core/Makefile.core.def | 2 +- + grub-core/disk/luks2.c | 13 +++++++++++-- + 3 files changed, 17 insertions(+), 4 deletions(-) + +diff --git a/Makefile.util.def b/Makefile.util.def +index 1e9a13d3e..a167825c3 100644 +--- a/Makefile.util.def ++++ b/Makefile.util.def +@@ -3,7 +3,7 @@ AutoGen definitions Makefile.tpl; + library = { + name = libgrubkern.a; + cflags = '$(CFLAGS_GNULIB)'; +- cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json'; ++ cppflags = '$(CPPFLAGS_GNULIB) -I$(srcdir)/grub-core/lib/json -I$(srcdir)/grub-core/lib/argon2'; + + common = util/misc.c; + common = grub-core/kern/command.c; +@@ -36,6 +36,10 @@ library = { + common = grub-core/kern/misc.c; + common = grub-core/kern/partition.c; + common = grub-core/lib/crypto.c; ++ common = grub-core/lib/argon2/argon2.c; ++ common = grub-core/lib/argon2/core.c; ++ common = grub-core/lib/argon2/ref.c; ++ common = grub-core/lib/argon2/blake2/blake2b.c; + common = grub-core/lib/json/json.c; + common = grub-core/disk/luks.c; + common = grub-core/disk/luks2.c; +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index 4a06789e5..e939dcc99 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -1238,7 +1238,7 @@ module = { + common = disk/luks2.c; + common = lib/gnulib/base64.c; + cflags = '$(CFLAGS_POSIX) $(CFLAGS_GNULIB)'; +- cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json'; ++ cppflags = '$(CPPFLAGS_POSIX) $(CPPFLAGS_GNULIB) -I$(srcdir)/lib/json -I$(srcdir)/lib/argon2'; + }; + + module = { +diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c +index bc818ea69..5b9eaa599 100644 +--- a/grub-core/disk/luks2.c ++++ b/grub-core/disk/luks2.c +@@ -27,6 +27,7 @@ + #include <grub/partition.h> + #include <grub/i18n.h> + ++#include <argon2.h> + #include <base64.h> + #include <json.h> + +@@ -462,8 +463,16 @@ luks2_decrypt_key (grub_uint8_t *out_key, + { + case LUKS2_KDF_TYPE_ARGON2I: + case LUKS2_KDF_TYPE_ARGON2ID: +- ret = grub_error (GRUB_ERR_BAD_ARGUMENT, "Argon2 not supported"); +- goto err; ++ ret = argon2_hash (k->kdf.u.argon2.time, k->kdf.u.argon2.memory, k->kdf.u.argon2.cpus, ++ passphrase, passphraselen, salt, saltlen, area_key, k->area.key_size, ++ k->kdf.type == LUKS2_KDF_TYPE_ARGON2I ? Argon2_i : Argon2_id, ++ ARGON2_VERSION_NUMBER); ++ if (ret) ++ { ++ grub_dprintf ("luks2", "Argon2 failed: %s\n", argon2_error_message (ret)); ++ goto err; ++ } ++ break; + case LUKS2_KDF_TYPE_PBKDF2: + hash = grub_crypto_lookup_md_by_name (k->kdf.u.pbkdf2.hash); + if (!hash) +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch b/config/grub/xhci/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch new file mode 100644 index 00000000..dc65b7a6 --- /dev/null +++ b/config/grub/xhci/patches/0002-luks2/0008-Make-grub-install-work-with-Argon2.patch @@ -0,0 +1,26 @@ +From 6c9a6625c0dc038d1bdbdc13665f40e269e86496 Mon Sep 17 00:00:00 2001 +From: Ax333l <main@axelen.xyz> +Date: Thu, 17 Aug 2023 00:00:00 +0000 +Subject: [PATCH 6/6] Make grub-install work with Argon2 + +Signed-off-by: Nicholas Johnson <nick@nicholasjohnson.ch> +--- + util/grub-install.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/util/grub-install.c b/util/grub-install.c +index 1ad04db36..a8a3330b8 100644 +--- a/util/grub-install.c ++++ b/util/grub-install.c +@@ -448,6 +448,8 @@ probe_mods (grub_disk_t disk) + { + grub_util_cryptodisk_get_abstraction (disk, + push_cryptodisk_module, NULL); ++ /* HACK: always push argon2 */ ++ grub_install_push_module ("argon2"); + have_abstractions = 1; + have_cryptodisk = 1; + } +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch b/config/grub/xhci/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch new file mode 100644 index 00000000..21e8630b --- /dev/null +++ b/config/grub/xhci/patches/0003-keyboardfix/0001-at_keyboard-coreboot-force-scancodes2-translate.patch @@ -0,0 +1,107 @@ +From 96c0bbe5d406b616360a7fce7cee67d7692c0d6d Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Mon, 30 Oct 2023 22:19:21 +0000 +Subject: [PATCH 1/1] at_keyboard coreboot: force scancodes2+translate + +Scan code set 2 with translation should be assumed in +every case, as the default starting position. + +However, GRUB is trying to detect and use other modes +such as set 2 without translation, or set 1 without +translation from set 2; it also detects no-mode and +assumes mode 1, on really old keyboards. + +The current behaviour has been retained, for everything +except GRUB_MACHINE_COREBOOT; for the latter, scan code +set 2 with translation is hardcoded, and forced in code. + +This is required to make keyboard initialisation work on +the MEC5035 EC used by the Dell Latitude E6400, when +running GRUB as a coreboot payload on that laptop. The +EC reports scancode set 2 with translation when probed, +but actually only outputs scancode set 1. + +Since GRUB is attempting to use it without translation, +and since the machine reports set 2 with translation, +but only ever outputs set 1 scancodes, this results in +wrong keypresses for every key. + +This fix fixed that, by forcing set 2 with translation, +treating it as set 1, but only on coreboot. This is the +same behaviour used in GNU+Linux systems and SeaBIOS. +With this change, GRUB keyboard initialisation now works +just fine on those machines. + +This has *also* been tested on other coreboot machines +running GRUB; several HP EliteBooks, ThinkPads and +Dell Precision T1650. All seems to work just fine. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/term/at_keyboard.c | 20 ++++++++++++++++++-- + 1 file changed, 18 insertions(+), 2 deletions(-) + +diff --git a/grub-core/term/at_keyboard.c b/grub-core/term/at_keyboard.c +index f8a129eb7..8207225c2 100644 +--- a/grub-core/term/at_keyboard.c ++++ b/grub-core/term/at_keyboard.c +@@ -138,6 +138,7 @@ write_mode (int mode) + return (i != GRUB_AT_TRIES); + } + ++#if !defined (GRUB_MACHINE_COREBOOT) + static int + query_mode (void) + { +@@ -161,10 +162,12 @@ query_mode (void) + return 3; + return 0; + } ++#endif + + static void + set_scancodes (void) + { ++#if !defined (GRUB_MACHINE_COREBOOT) + /* You must have visited computer museum. Keyboard without scancode set + knowledge. Assume XT. */ + if (!grub_keyboard_orig_set) +@@ -173,20 +176,33 @@ set_scancodes (void) + ps2_state.current_set = 1; + return; + } ++#endif + + #if !USE_SCANCODE_SET + ps2_state.current_set = 1; + return; +-#else ++#endif + ++#if defined (GRUB_MACHINE_COREBOOT) ++ /* enable translation */ ++ grub_keyboard_controller_write (grub_keyboard_controller_orig ++ & ~KEYBOARD_AT_DISABLE); ++#else ++ /* if not coreboot, disable translation and try mode 2 first, before 1 */ + grub_keyboard_controller_write (grub_keyboard_controller_orig + & ~KEYBOARD_AT_TRANSLATE + & ~KEYBOARD_AT_DISABLE); ++#endif + + keyboard_controller_wait_until_ready (); + grub_outb (KEYBOARD_COMMAND_ENABLE, KEYBOARD_REG_DATA); +- + write_mode (2); ++ ++#if defined (GRUB_MACHINE_COREBOOT) ++ /* mode 2 with translation, so make grub treat as set 1 */ ++ ps2_state.current_set = 1; ++#else ++ /* if not coreboot, translation isn't set; test 2 and fall back to 1 */ + ps2_state.current_set = query_mode (); + grub_dprintf ("atkeyb", "returned set %d\n", ps2_state.current_set); + if (ps2_state.current_set == 2) +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch b/config/grub/xhci/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch new file mode 100644 index 00000000..fbef86a4 --- /dev/null +++ b/config/grub/xhci/patches/0003-keyboardfix/0002-keylayouts-don-t-print-Unknown-key-message.patch @@ -0,0 +1,38 @@ +From 0a6abeb40ac4284fbff6ef5958989d561b6290a7 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Tue, 31 Oct 2023 10:33:28 +0000 +Subject: [PATCH 1/1] keylayouts: don't print "Unknown key" message + +on keyboards with stuck keys, this results in GRUB just +spewing it repeatedly, preventing use of GRUB. + +in such cases, it's still possible to use the keyboard, +and we should let the user at least boot. + +it often appears when people plug in faulty usb keyboards, +but can appear for laptop keyboards too; one of my e6400 +has stuck keys. + +with this patch, grub should be a bit more reliable in +terms of user experience, when the keyboard is faulty. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/commands/keylayouts.c | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/grub-core/commands/keylayouts.c b/grub-core/commands/keylayouts.c +index aa3ba34f2..445fa0601 100644 +--- a/grub-core/commands/keylayouts.c ++++ b/grub-core/commands/keylayouts.c +@@ -174,7 +174,6 @@ grub_term_map_key (grub_keyboard_key_t code, int status) + key = map_key_core (code, status, &alt_gr_consumed); + + if (key == 0 || key == GRUB_TERM_SHIFT) { +- grub_printf ("Unknown key 0x%x detected\n", code); + return GRUB_TERM_NO_KEY; + } + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch b/config/grub/xhci/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch new file mode 100644 index 00000000..25091d16 --- /dev/null +++ b/config/grub/xhci/patches/0004-prefix/0001-don-t-print-missing-prefix-errors-on-the-screen.patch @@ -0,0 +1,102 @@ +From 9e7a651a0f15f2e9dec65a77765c3c4fd97b4165 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 5 Nov 2023 16:14:58 +0000 +Subject: [PATCH 1/1] don't print missing prefix errors on the screen + +we do actually set the prefix. this patch modifies +grub to still set grub_errno and return accordingly, +so the behaviour is otherwise identical, but it will +no longer print a warning message on the screen. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/commands/keylayouts.c | 2 +- + grub-core/commands/loadenv.c | 2 +- + grub-core/commands/nativedisk.c | 2 +- + grub-core/efiemu/main.c | 3 +-- + grub-core/font/font.c | 2 +- + grub-core/kern/dl.c | 2 +- + 6 files changed, 6 insertions(+), 7 deletions(-) + +diff --git a/grub-core/commands/keylayouts.c b/grub-core/commands/keylayouts.c +index 445fa0601..00bcf7025 100644 +--- a/grub-core/commands/keylayouts.c ++++ b/grub-core/commands/keylayouts.c +@@ -211,7 +211,7 @@ grub_cmd_keymap (struct grub_command *cmd __attribute__ ((unused)), + { + const char *prefix = grub_env_get ("prefix"); + if (!prefix) +- return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("variable `%s' isn't set"), "prefix"); ++ return (grub_errno = GRUB_ERR_BAD_ARGUMENT); + filename = grub_xasprintf ("%s/layouts/%s.gkb", prefix, argv[0]); + if (!filename) + return grub_errno; +diff --git a/grub-core/commands/loadenv.c b/grub-core/commands/loadenv.c +index 166445849..699b39bfa 100644 +--- a/grub-core/commands/loadenv.c ++++ b/grub-core/commands/loadenv.c +@@ -58,7 +58,7 @@ open_envblk_file (char *filename, + prefix = grub_env_get ("prefix"); + if (! prefix) + { +- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ grub_errno = GRUB_ERR_FILE_NOT_FOUND; + return 0; + } + +diff --git a/grub-core/commands/nativedisk.c b/grub-core/commands/nativedisk.c +index 580c8d3b0..6806bff9c 100644 +--- a/grub-core/commands/nativedisk.c ++++ b/grub-core/commands/nativedisk.c +@@ -186,7 +186,7 @@ grub_cmd_nativedisk (grub_command_t cmd __attribute__ ((unused)), + prefix = grub_env_get ("prefix"); + + if (! prefix) +- return grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ return (grub_errno = GRUB_ERR_FILE_NOT_FOUND); + + if (prefix) + path_prefix = (prefix[0] == '(') ? grub_strchr (prefix, ')') : NULL; +diff --git a/grub-core/efiemu/main.c b/grub-core/efiemu/main.c +index e7037f4ed..e5d4dbff1 100644 +--- a/grub-core/efiemu/main.c ++++ b/grub-core/efiemu/main.c +@@ -231,8 +231,7 @@ grub_efiemu_autocore (void) + prefix = grub_env_get ("prefix"); + + if (! prefix) +- return grub_error (GRUB_ERR_FILE_NOT_FOUND, +- N_("variable `%s' isn't set"), "prefix"); ++ return (grub_errno = GRUB_ERR_FILE_NOT_FOUND); + + suffix = grub_efiemu_get_default_core_name (); + +diff --git a/grub-core/font/font.c b/grub-core/font/font.c +index 18de52562..2a0fea6c8 100644 +--- a/grub-core/font/font.c ++++ b/grub-core/font/font.c +@@ -461,7 +461,7 @@ grub_font_load (const char *filename) + + if (!prefix) + { +- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ grub_errno = GRUB_ERR_FILE_NOT_FOUND; + goto fail; + } + file = try_open_from_prefix (prefix, filename); +diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c +index 4011e2d15..af3bd00d0 100644 +--- a/grub-core/kern/dl.c ++++ b/grub-core/kern/dl.c +@@ -758,7 +758,7 @@ grub_dl_load (const char *name) + return 0; + + if (! grub_dl_dir) { +- grub_error (GRUB_ERR_FILE_NOT_FOUND, N_("variable `%s' isn't set"), "prefix"); ++ grub_errno = GRUB_ERR_FILE_NOT_FOUND; + return 0; + } + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch b/config/grub/xhci/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch new file mode 100644 index 00000000..f4cf939e --- /dev/null +++ b/config/grub/xhci/patches/0004-prefix/0002-don-t-print-error-if-module-not-found.patch @@ -0,0 +1,34 @@ +From 6237c5762edccc1e1fa4746b1d4aa5e8d81e4883 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 5 Nov 2023 16:36:22 +0000 +Subject: [PATCH 1/1] don't print error if module not found + +still set grub_errno accordingly, and otherwise +behave the same. in libreboot, we remove a lot of +modules but then rely on loading a grub.cfg +provided by a distro; in almost all cases that works, +but also in almost all cases, that will try to load +a module we don't actually need, but then it prints +a message. this can annoy some users, so silence it. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/kern/dl.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c +index af3bd00d0..21d0cedb1 100644 +--- a/grub-core/kern/dl.c ++++ b/grub-core/kern/dl.c +@@ -486,7 +486,7 @@ grub_dl_resolve_name (grub_dl_t mod, Elf_Ehdr *e) + + s = grub_dl_find_section (e, ".modname"); + if (!s) +- return grub_error (GRUB_ERR_BAD_MODULE, "no module name found"); ++ return (grub_errno = GRUB_ERR_BAD_MODULE); + + mod->name = grub_strdup ((char *) e + s->sh_offset); + if (! mod->name) +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch b/config/grub/xhci/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch new file mode 100644 index 00000000..25221c9c --- /dev/null +++ b/config/grub/xhci/patches/0004-prefix/0003-don-t-print-empty-error-messages.patch @@ -0,0 +1,31 @@ +From e5b7ec81421487e71bcaf8b6b5a27f3649a62753 Mon Sep 17 00:00:00 2001 +From: Leah Rowe <leah@libreboot.org> +Date: Sun, 5 Nov 2023 17:25:20 +0000 +Subject: [PATCH 1/1] don't print empty error messages + +this is part two of the quest to kill the prefix +error message. after i disabled prefix-related +messages, it still printed "error: ." on screen. + +Signed-off-by: Leah Rowe <leah@libreboot.org> +--- + grub-core/kern/err.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/grub-core/kern/err.c b/grub-core/kern/err.c +index 53c734de7..7cac53983 100644 +--- a/grub-core/kern/err.c ++++ b/grub-core/kern/err.c +@@ -107,7 +107,8 @@ grub_print_error (void) + { + if (grub_errno != GRUB_ERR_NONE) + { +- grub_err_printf (_("error: %s.\n"), grub_errmsg); ++ if (grub_strlen(grub_errmsg) > 0) ++ grub_err_printf (_("error: %s.\n"), grub_errmsg); + grub_err_printed_errors++; + } + } +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0001-grub-core-bus-usb-Parse-SuperSpeed-companion-descrip.patch b/config/grub/xhci/patches/0005-xhci/0001-grub-core-bus-usb-Parse-SuperSpeed-companion-descrip.patch new file mode 100644 index 00000000..f533269f --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0001-grub-core-bus-usb-Parse-SuperSpeed-companion-descrip.patch @@ -0,0 +1,245 @@ +From 90c9011f2e0350a97e3df44b0fc6dd022e04c276 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:00:27 +0100 +Subject: [PATCH 1/8] grub-core/bus/usb: Parse SuperSpeed companion descriptors + +Parse the SS_ENDPOINT_COMPANION descriptor, which is only present on USB 3.0 +capable devices and xHCI controllers. Make the descendp an array of pointers +to the endpoint descriptor as it's no longer an continous array. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/serial/common.c | 2 +- + grub-core/bus/usb/usb.c | 44 +++++++++++++++++++------------ + grub-core/bus/usb/usbhub.c | 22 ++++++++++++---- + grub-core/commands/usbtest.c | 2 +- + grub-core/disk/usbms.c | 2 +- + grub-core/term/usb_keyboard.c | 2 +- + include/grub/usb.h | 2 +- + include/grub/usbdesc.h | 11 +++++++- + 8 files changed, 59 insertions(+), 28 deletions(-) + +diff --git a/grub-core/bus/usb/serial/common.c b/grub-core/bus/usb/serial/common.c +index e9c995a0a..fc847d66d 100644 +--- a/grub-core/bus/usb/serial/common.c ++++ b/grub-core/bus/usb/serial/common.c +@@ -72,7 +72,7 @@ grub_usbserial_attach (grub_usb_device_t usbdev, int configno, int interfno, + for (j = 0; j < interf->endpointcnt; j++) + { + struct grub_usb_desc_endp *endp; +- endp = &usbdev->config[0].interf[interfno].descendp[j]; ++ endp = usbdev->config[0].interf[interfno].descendp[j]; + + if ((endp->endp_addr & 128) && (endp->attrib & 3) == 2 + && (in_endp == GRUB_USB_SERIAL_ENDPOINT_LAST_MATCHING +diff --git a/grub-core/bus/usb/usb.c b/grub-core/bus/usb/usb.c +index 7bd49d201..e578af793 100644 +--- a/grub-core/bus/usb/usb.c ++++ b/grub-core/bus/usb/usb.c +@@ -118,7 +118,7 @@ grub_usb_device_initialize (grub_usb_device_t dev) + struct grub_usb_desc_device *descdev; + struct grub_usb_desc_config config; + grub_usb_err_t err; +- int i; ++ int i, j; + + /* First we have to read first 8 bytes only and determine + * max. size of packet */ +@@ -152,6 +152,7 @@ grub_usb_device_initialize (grub_usb_device_t dev) + int currif; + char *data; + struct grub_usb_desc *desc; ++ struct grub_usb_desc_endp *endp; + + /* First just read the first 4 bytes of the configuration + descriptor, after that it is known how many bytes really have +@@ -201,24 +202,27 @@ grub_usb_device_initialize (grub_usb_device_t dev) + = (struct grub_usb_desc_if *) &data[pos]; + pos += dev->config[i].interf[currif].descif->length; + ++ dev->config[i].interf[currif].descendp = grub_malloc ( ++ dev->config[i].interf[currif].descif->endpointcnt * ++ sizeof(struct grub_usb_desc_endp)); ++ ++ j = 0; + while (pos < config.totallen) + { + desc = (struct grub_usb_desc *)&data[pos]; +- if (desc->type == GRUB_USB_DESCRIPTOR_ENDPOINT) +- break; +- if (!desc->length) +- { +- err = GRUB_USB_ERR_BADDEVICE; +- goto fail; +- } +- pos += desc->length; +- } +- +- /* Point to the first endpoint. */ +- dev->config[i].interf[currif].descendp +- = (struct grub_usb_desc_endp *) &data[pos]; +- pos += (sizeof (struct grub_usb_desc_endp) +- * dev->config[i].interf[currif].descif->endpointcnt); ++ if (desc->type == GRUB_USB_DESCRIPTOR_ENDPOINT) { ++ endp = (struct grub_usb_desc_endp *) &data[pos]; ++ dev->config[i].interf[currif].descendp[j++] = endp; ++ pos += desc->length; ++ } else { ++ if (!desc->length) ++ { ++ err = GRUB_USB_ERR_BADDEVICE; ++ goto fail; ++ } ++ pos += desc->length; ++ } ++ } + } + } + +@@ -226,8 +230,14 @@ grub_usb_device_initialize (grub_usb_device_t dev) + + fail: + +- for (i = 0; i < GRUB_USB_MAX_CONF; i++) ++ for (i = 0; i < GRUB_USB_MAX_CONF; i++) { ++ int currif; ++ ++ for (currif = 0; currif < dev->config[i].descconf->numif; currif++) ++ grub_free (dev->config[i].interf[currif].descendp); ++ + grub_free (dev->config[i].descconf); ++ } + + return err; + } +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index f5608e330..2ae29cba1 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -82,8 +82,14 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + if (i == GRUB_USBHUB_MAX_DEVICES) + { + grub_error (GRUB_ERR_IO, "can't assign address to USB device"); +- for (i = 0; i < GRUB_USB_MAX_CONF; i++) +- grub_free (dev->config[i].descconf); ++ for (i = 0; i < GRUB_USB_MAX_CONF; i++) { ++ int currif; ++ ++ for (currif = 0; currif < dev->config[i].descconf->numif; currif++) ++ grub_free (dev->config[i].interf[currif].descendp); ++ ++ grub_free (dev->config[i].descconf); ++ } + grub_free (dev); + return NULL; + } +@@ -96,8 +102,14 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + i, 0, 0, NULL); + if (err) + { +- for (i = 0; i < GRUB_USB_MAX_CONF; i++) +- grub_free (dev->config[i].descconf); ++ for (i = 0; i < GRUB_USB_MAX_CONF; i++) { ++ int currif; ++ ++ for (currif = 0; currif < dev->config[i].descconf->numif; currif++) ++ grub_free (dev->config[i].interf[currif].descendp); ++ ++ grub_free (dev->config[i].descconf); ++ } + grub_free (dev); + return NULL; + } +@@ -176,7 +188,7 @@ grub_usb_add_hub (grub_usb_device_t dev) + i++) + { + struct grub_usb_desc_endp *endp = NULL; +- endp = &dev->config[0].interf[0].descendp[i]; ++ endp = dev->config[0].interf[0].descendp[i]; + + if ((endp->endp_addr & 128) && grub_usb_get_ep_type(endp) + == GRUB_USB_EP_INTERRUPT) +diff --git a/grub-core/commands/usbtest.c b/grub-core/commands/usbtest.c +index 2c6d93fe6..55a657635 100644 +--- a/grub-core/commands/usbtest.c ++++ b/grub-core/commands/usbtest.c +@@ -185,7 +185,7 @@ usb_iterate (grub_usb_device_t dev, void *data __attribute__ ((unused))) + for (j = 0; j < interf->endpointcnt; j++) + { + struct grub_usb_desc_endp *endp; +- endp = &dev->config[0].interf[i].descendp[j]; ++ endp = dev->config[0].interf[i].descendp[j]; + + grub_printf ("Endpoint #%d: %s, max packed size: %d, transfer type: %s, latency: %d\n", + endp->endp_addr & 15, +diff --git a/grub-core/disk/usbms.c b/grub-core/disk/usbms.c +index b81e3ad9d..b1512dc12 100644 +--- a/grub-core/disk/usbms.c ++++ b/grub-core/disk/usbms.c +@@ -184,7 +184,7 @@ grub_usbms_attach (grub_usb_device_t usbdev, int configno, int interfno) + for (j = 0; j < interf->endpointcnt; j++) + { + struct grub_usb_desc_endp *endp; +- endp = &usbdev->config[0].interf[interfno].descendp[j]; ++ endp = usbdev->config[0].interf[interfno].descendp[j]; + + if ((endp->endp_addr & 128) && (endp->attrib & 3) == 2) + /* Bulk IN endpoint. */ +diff --git a/grub-core/term/usb_keyboard.c b/grub-core/term/usb_keyboard.c +index 7322d8dff..d590979f5 100644 +--- a/grub-core/term/usb_keyboard.c ++++ b/grub-core/term/usb_keyboard.c +@@ -175,7 +175,7 @@ grub_usb_keyboard_attach (grub_usb_device_t usbdev, int configno, int interfno) + for (j = 0; j < usbdev->config[configno].interf[interfno].descif->endpointcnt; + j++) + { +- endp = &usbdev->config[configno].interf[interfno].descendp[j]; ++ endp = usbdev->config[configno].interf[interfno].descendp[j]; + + if ((endp->endp_addr & 128) && grub_usb_get_ep_type(endp) + == GRUB_USB_EP_INTERRUPT) +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 0f346af12..688c11f6d 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -153,7 +153,7 @@ struct grub_usb_interface + { + struct grub_usb_desc_if *descif; + +- struct grub_usb_desc_endp *descendp; ++ struct grub_usb_desc_endp **descendp; + + /* A driver is handling this interface. Do we need to support multiple drivers + for single interface? +diff --git a/include/grub/usbdesc.h b/include/grub/usbdesc.h +index aac5ab05a..bb2ab2e27 100644 +--- a/include/grub/usbdesc.h ++++ b/include/grub/usbdesc.h +@@ -29,7 +29,8 @@ typedef enum { + GRUB_USB_DESCRIPTOR_INTERFACE, + GRUB_USB_DESCRIPTOR_ENDPOINT, + GRUB_USB_DESCRIPTOR_DEBUG = 10, +- GRUB_USB_DESCRIPTOR_HUB = 0x29 ++ GRUB_USB_DESCRIPTOR_HUB = 0x29, ++ GRUB_USB_DESCRIPTOR_SS_ENDPOINT_COMPANION = 0x30 + } grub_usb_descriptor_t; + + struct grub_usb_desc +@@ -105,6 +106,14 @@ struct grub_usb_desc_endp + grub_uint8_t interval; + } GRUB_PACKED; + ++struct grub_usb_desc_ssep { ++ grub_uint8_t length; ++ grub_uint8_t type; ++ grub_uint8_t maxburst; ++ grub_uint8_t attrib; ++ grub_uint16_t interval; ++} GRUB_PACKED; ++ + struct grub_usb_desc_str + { + grub_uint8_t length; +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0002-usb-Add-enum-for-xHCI.patch b/config/grub/xhci/patches/0005-xhci/0002-usb-Add-enum-for-xHCI.patch new file mode 100644 index 00000000..d61da615 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0002-usb-Add-enum-for-xHCI.patch @@ -0,0 +1,29 @@ +From e111983ca5e2a52bfe2bdc5cd639b06bb2f7902d Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:47:06 +0100 +Subject: [PATCH 2/8] usb: Add enum for xHCI + +Will be used in future patches. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + include/grub/usb.h | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 688c11f6d..ea6ee8c2c 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -51,7 +51,8 @@ typedef enum + GRUB_USB_SPEED_NONE, + GRUB_USB_SPEED_LOW, + GRUB_USB_SPEED_FULL, +- GRUB_USB_SPEED_HIGH ++ GRUB_USB_SPEED_HIGH, ++ GRUB_USB_SPEED_SUPER + } grub_usb_speed_t; + + typedef int (*grub_usb_iterate_hook_t) (grub_usb_device_t dev, void *data); +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0003-usbtrans-Set-default-maximum-packet-size.patch b/config/grub/xhci/patches/0005-xhci/0003-usbtrans-Set-default-maximum-packet-size.patch new file mode 100644 index 00000000..70e73ca2 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0003-usbtrans-Set-default-maximum-packet-size.patch @@ -0,0 +1,33 @@ +From 3e25c83a1d1c6e149c7e9f0660ddadb2beca2476 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:48:03 +0100 +Subject: [PATCH 3/8] usbtrans: Set default maximum packet size + +Set the maximum packet size to 512 for SuperSpeed devices. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/usbtrans.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/grub-core/bus/usb/usbtrans.c b/grub-core/bus/usb/usbtrans.c +index c5680b33a..c1080bb33 100644 +--- a/grub-core/bus/usb/usbtrans.c ++++ b/grub-core/bus/usb/usbtrans.c +@@ -128,8 +128,12 @@ grub_usb_control_msg (grub_usb_device_t dev, + setupdata_addr = grub_dma_get_phys (setupdata_chunk); + + /* Determine the maximum packet size. */ +- if (dev->descdev.maxsize0) ++ if (dev->descdev.maxsize0 && dev->speed != GRUB_USB_SPEED_SUPER) + max = dev->descdev.maxsize0; ++ else if (dev->descdev.maxsize0 && dev->speed == GRUB_USB_SPEED_SUPER) ++ max = 1UL << dev->descdev.maxsize0; ++ else if (dev->speed == GRUB_USB_SPEED_SUPER) ++ max = 512; + else + max = 64; + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0004-grub-core-bus-usb-Add-function-pointer-for-attach-de.patch b/config/grub/xhci/patches/0005-xhci/0004-grub-core-bus-usb-Add-function-pointer-for-attach-de.patch new file mode 100644 index 00000000..a090e0ea --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0004-grub-core-bus-usb-Add-function-pointer-for-attach-de.patch @@ -0,0 +1,121 @@ +From 89701aba00caa81bb566ab10da0c89264393be30 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:51:42 +0100 +Subject: [PATCH 4/8] grub-core/bus/usb: Add function pointer for attach/detach + events + +The xHCI code needs to be called for attaching or detaching a device. +Introduce two functions pointers and call it from the USB hub code. + +Will be used in future commits, currently this doesn't change any functionality. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/ehci.c | 2 ++ + grub-core/bus/usb/ohci.c | 2 ++ + grub-core/bus/usb/uhci.c | 2 ++ + grub-core/bus/usb/usbhub.c | 19 +++++++++++++++++++ + include/grub/usb.h | 4 ++++ + 5 files changed, 29 insertions(+) + +diff --git a/grub-core/bus/usb/ehci.c b/grub-core/bus/usb/ehci.c +index 9abebc6bd..953b851c0 100644 +--- a/grub-core/bus/usb/ehci.c ++++ b/grub-core/bus/usb/ehci.c +@@ -1812,6 +1812,8 @@ static struct grub_usb_controller_dev usb_controller = { + .hubports = grub_ehci_hubports, + .portstatus = grub_ehci_portstatus, + .detect_dev = grub_ehci_detect_dev, ++ .attach_dev = NULL, ++ .detach_dev = NULL, + /* estimated max. count of TDs for one bulk transfer */ + .max_bulk_tds = GRUB_EHCI_N_TD * 3 / 4 + }; +diff --git a/grub-core/bus/usb/ohci.c b/grub-core/bus/usb/ohci.c +index 5363a61f6..7a3f3e154 100644 +--- a/grub-core/bus/usb/ohci.c ++++ b/grub-core/bus/usb/ohci.c +@@ -1440,6 +1440,8 @@ static struct grub_usb_controller_dev usb_controller = + .hubports = grub_ohci_hubports, + .portstatus = grub_ohci_portstatus, + .detect_dev = grub_ohci_detect_dev, ++ .attach_dev = NULL, ++ .detach_dev = NULL, + /* estimated max. count of TDs for one bulk transfer */ + .max_bulk_tds = GRUB_OHCI_TDS * 3 / 4 + }; +diff --git a/grub-core/bus/usb/uhci.c b/grub-core/bus/usb/uhci.c +index 0fdea4c1e..03c4605b2 100644 +--- a/grub-core/bus/usb/uhci.c ++++ b/grub-core/bus/usb/uhci.c +@@ -845,6 +845,8 @@ static struct grub_usb_controller_dev usb_controller = + .hubports = grub_uhci_hubports, + .portstatus = grub_uhci_portstatus, + .detect_dev = grub_uhci_detect_dev, ++ .attach_dev = NULL, ++ .detach_dev = NULL, + /* estimated max. count of TDs for one bulk transfer */ + .max_bulk_tds = N_TD * 3 / 4 + }; +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index 2ae29cba1..8e963e84b 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -66,6 +66,15 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + dev->split_hubport = split_hubport; + dev->split_hubaddr = split_hubaddr; + ++ if (controller->dev->attach_dev) { ++ err = controller->dev->attach_dev (controller, dev); ++ if (err) ++ { ++ grub_free (dev); ++ return NULL; ++ } ++ } ++ + err = grub_usb_device_initialize (dev); + if (err) + { +@@ -405,6 +414,8 @@ static void + detach_device (grub_usb_device_t dev) + { + unsigned i; ++ grub_usb_err_t err; ++ + int k; + if (!dev) + return; +@@ -425,6 +436,14 @@ detach_device (grub_usb_device_t dev) + if (inter && inter->detach_hook) + inter->detach_hook (dev, i, k); + } ++ if (dev->controller.dev->detach_dev) { ++ err = dev->controller.dev->detach_dev (&dev->controller, dev); ++ if (err) ++ { ++ // XXX ++ } ++ } ++ + grub_usb_devs[dev->addr] = 0; + } + +diff --git a/include/grub/usb.h b/include/grub/usb.h +index ea6ee8c2c..4dd179db2 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -126,6 +126,10 @@ struct grub_usb_controller_dev + + grub_usb_speed_t (*detect_dev) (grub_usb_controller_t dev, int port, int *changed); + ++ grub_usb_err_t (*attach_dev) (grub_usb_controller_t ctrl, grub_usb_device_t dev); ++ ++ grub_usb_err_t (*detach_dev) (grub_usb_controller_t ctrl, grub_usb_device_t dev); ++ + /* Per controller flag - port reset pending, don't do another reset */ + grub_uint64_t pending_reset; + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0005-grub-core-bus-usb-usbhub-Add-new-private-fields-for-.patch b/config/grub/xhci/patches/0005-xhci/0005-grub-core-bus-usb-usbhub-Add-new-private-fields-for-.patch new file mode 100644 index 00000000..7d69c3a6 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0005-grub-core-bus-usb-usbhub-Add-new-private-fields-for-.patch @@ -0,0 +1,77 @@ +From 5e5d74a4531770258e21dedd45c33f1a9d3afa6b Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:54:40 +0100 +Subject: [PATCH 5/8] grub-core/bus/usb/usbhub: Add new private fields for xHCI + controller + +Store the root port number, the route, consisting out of the port ID +in each nibble, and a pointer to driver private data. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/usbhub.c | 11 ++++++++--- + include/grub/usb.h | 5 +++++ + 2 files changed, 13 insertions(+), 3 deletions(-) + +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index 8e963e84b..b4b3a1a61 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -49,7 +49,9 @@ static grub_usb_controller_dev_t grub_usb_list; + static grub_usb_device_t + grub_usb_hub_add_dev (grub_usb_controller_t controller, + grub_usb_speed_t speed, +- int split_hubport, int split_hubaddr) ++ int split_hubport, int split_hubaddr, ++ int root_portno, ++ grub_uint32_t route) + { + grub_usb_device_t dev; + int i; +@@ -65,6 +67,8 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + dev->speed = speed; + dev->split_hubport = split_hubport; + dev->split_hubaddr = split_hubaddr; ++ dev->root_port = root_portno; ++ dev->route = route; + + if (controller->dev->attach_dev) { + err = controller->dev->attach_dev (controller, dev); +@@ -245,7 +249,7 @@ attach_root_port (struct grub_usb_hub *hub, int portno, + and full/low speed device connected to OHCI/UHCI needs not + transaction translation - e.g. hubport and hubaddr should be + always none (zero) for any device connected to any root hub. */ +- dev = grub_usb_hub_add_dev (hub->controller, speed, 0, 0); ++ dev = grub_usb_hub_add_dev (hub->controller, speed, 0, 0, portno, 0); + hub->controller->dev->pending_reset = 0; + npending--; + if (! dev) +@@ -676,7 +680,8 @@ poll_nonroot_hub (grub_usb_device_t dev) + + /* Add the device and assign a device address to it. */ + next_dev = grub_usb_hub_add_dev (&dev->controller, speed, +- split_hubport, split_hubaddr); ++ split_hubport, split_hubaddr, dev->root_port, ++ dev->route << 4 | (i & 0xf)); + if (dev->controller.dev->pending_reset) + { + dev->controller.dev->pending_reset = 0; +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 4dd179db2..609faf7d0 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -237,6 +237,11 @@ struct grub_usb_device + int split_hubport; + + int split_hubaddr; ++ ++ /* xHCI specific information */ ++ int root_port; ++ grub_uint32_t route; ++ void *xhci_priv; + }; + + +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0006-grub-core-bus-usb-Add-xhci-support.patch b/config/grub/xhci/patches/0005-xhci/0006-grub-core-bus-usb-Add-xhci-support.patch new file mode 100644 index 00000000..11df42d8 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0006-grub-core-bus-usb-Add-xhci-support.patch @@ -0,0 +1,2814 @@ +From fe3a0bce527e059e9121eb5ad2c3cc099f07a4bf Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Sun, 15 Nov 2020 19:59:25 +0100 +Subject: [PATCH 6/8] grub-core/bus/usb: Add xhci support + +Add support for xHCI USB controllers. +The code is based on seabios implementation, but has been heavily +modified to match grubs internals. + +Changes done in version 2: +* Code cleanup +* Code style fixes +* Don't leak memory buffers +* Compile without warnings +* Add more defines +* Add more helper functions +* Don't assume a 1:1 virtual to physical mapping +* Flush cachelines after writing buffers +* Don't use hardcoded page size +* Proper scratchpad register setup +* xHCI bios ownership handoff + +Changes done in version 3: +* Fixed a race condition detecting events, which doesn't appear on + qemu based xHCI controllers +* Don't accidently disable USB3.0 devices after first command +* Support arbitrary protocol speed IDs +* Coding style cleanup + +Tested: +* Qemu system x86_64 + * virtual USB HID keyboard (usb-kbd) + * virtual USB HID mass storage (usb-storage) +* init Supermicro X11SSH-F + * iKVM HID keyboard + * USB3 HID mass storage (controller root port) + * USB HID keyboard + +TODO: + * Test on more hardware + * Test on USB3 hubs + * Support for USB 3.1 and USB 3.2 controllers + +Tested on qemu using coreboot and grub as payload: + +qemu-system-x86_64 -M q35 -bios $firmware -device qemu-xhci,id=xhci -accel kvm -m 1024M \ + -device usb-storage,drive=thumbdrive,bus=xhci.0,port=3 \ + -drive if=none,format=raw,id=thumbdrive,file=ubuntu-20.04.1-desktop-amd64.iso \ + -device usb-kbd,bus=xhci.0 + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +Signed-off-by: sylv <sylv@sylv.io> +--- + Makefile.am | 2 +- + grub-core/Makefile.core.def | 7 + + grub-core/bus/usb/xhci-pci.c | 195 +++ + grub-core/bus/usb/xhci.c | 2496 ++++++++++++++++++++++++++++++++++ + include/grub/usb.h | 4 + + 5 files changed, 2703 insertions(+), 1 deletion(-) + create mode 100644 grub-core/bus/usb/xhci-pci.c + create mode 100644 grub-core/bus/usb/xhci.c + +diff --git a/Makefile.am b/Makefile.am +index 43635d5ff..65016f856 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -434,7 +434,7 @@ if COND_i386_coreboot + FS_PAYLOAD_MODULES ?= $(shell cat grub-core/fs.lst) + default_payload.elf: grub-mkstandalone grub-mkimage FORCE + test -f $@ && rm $@ || true +- pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg ++ pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata xhci ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg + endif + + endif +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index fb6078a34..64c3806ab 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -667,6 +667,13 @@ module = { + enable = arm_coreboot; + }; + ++module = { ++ name = xhci; ++ common = bus/usb/xhci.c; ++ pci = bus/usb/xhci-pci.c; ++ enable = pci; ++}; ++ + module = { + name = pci; + common = bus/pci.c; +diff --git a/grub-core/bus/usb/xhci-pci.c b/grub-core/bus/usb/xhci-pci.c +new file mode 100644 +index 000000000..a5bd3c97d +--- /dev/null ++++ b/grub-core/bus/usb/xhci-pci.c +@@ -0,0 +1,195 @@ ++/* xhci.c - XHCI Support. */ ++/* ++ * GRUB -- GRand Unified Bootloader ++ * Copyright (C) 2020 9elements Cyber Security ++ * ++ * GRUB is free software: you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation, either version 3 of the License, or ++ * (at your option) any later version. ++ * ++ * GRUB is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with GRUB. If not, see <http://www.gnu.org/licenses/>. ++ */ ++ ++#include <grub/pci.h> ++#include <grub/cpu/pci.h> ++#include <grub/cs5536.h> ++#include <grub/misc.h> ++#include <grub/mm.h> ++#include <grub/time.h> ++#include <grub/usb.h> ++ ++#define GRUB_XHCI_PCI_SBRN_REG 0x60 ++#define GRUB_XHCI_ADDR_MEM_MASK (~0xff) ++ ++/* USBLEGSUP bits and related OS OWNED byte offset */ ++enum ++{ ++ GRUB_XHCI_BIOS_OWNED = (1 << 16), ++ GRUB_XHCI_OS_OWNED = (1 << 24) ++}; ++ ++/* PCI iteration function... */ ++static int ++grub_xhci_pci_iter (grub_pci_device_t dev, grub_pci_id_t pciid, ++ void *data __attribute__ ((unused))) ++{ ++ volatile grub_uint32_t *regs; ++ grub_uint32_t base, base_h; ++ grub_uint32_t eecp_offset; ++ grub_uint32_t usblegsup = 0; ++ grub_uint64_t maxtime; ++ grub_uint32_t interf; ++ grub_uint32_t subclass; ++ grub_uint32_t class; ++ grub_uint8_t release; ++ grub_uint32_t class_code; ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: begin\n"); ++ ++ if (pciid == GRUB_CS5536_PCIID) ++ { ++ grub_dprintf ("xhci", "CS5536 not supported\n"); ++ return 0; ++ } ++ else ++ { ++ grub_pci_address_t addr; ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_CLASS); ++ class_code = grub_pci_read (addr) >> 8; ++ interf = class_code & 0xFF; ++ subclass = (class_code >> 8) & 0xFF; ++ class = class_code >> 16; ++ ++ /* If this is not an XHCI controller, just return. */ ++ if (class != 0x0c || subclass != 0x03 || interf != 0x30) ++ return 0; ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: class OK\n"); ++ ++ /* Check Serial Bus Release Number */ ++ addr = grub_pci_make_address (dev, GRUB_XHCI_PCI_SBRN_REG); ++ release = grub_pci_read_byte (addr); ++ if (release != 0x30) ++ { ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: Wrong SBRN: %0x\n", ++ release); ++ return 0; ++ } ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: bus rev. num. OK\n"); ++ ++ /* Determine XHCI XHCC registers base address. */ ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0); ++ base = grub_pci_read (addr); ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG1); ++ base_h = grub_pci_read (addr); ++ /* Stop if registers are mapped above 4G - GRUB does not currently ++ * work with registers mapped above 4G */ ++ if (((base & GRUB_PCI_ADDR_MEM_TYPE_MASK) != GRUB_PCI_ADDR_MEM_TYPE_32) ++ && (base_h != 0)) ++ { ++ grub_dprintf ("xhci", ++ "XHCI grub_xhci_pci_iter: registers above 4G are not supported\n"); ++ return 0; ++ } ++ base &= GRUB_PCI_ADDR_MEM_MASK; ++ if (!base) ++ { ++ grub_dprintf ("xhci", ++ "XHCI: XHCI is not mapped\n"); ++ return 0; ++ } ++ ++ /* Set bus master - needed for coreboot, VMware, broken BIOSes etc. */ ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND); ++ grub_pci_write_word(addr, ++ GRUB_PCI_COMMAND_MEM_ENABLED ++ | GRUB_PCI_COMMAND_BUS_MASTER ++ | grub_pci_read_word(addr)); ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: 32-bit XHCI OK\n"); ++ } ++ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: iobase of XHCC: %08x\n", ++ (base & GRUB_XHCI_ADDR_MEM_MASK)); ++ ++ regs = grub_pci_device_map_range (dev, ++ (base & GRUB_XHCI_ADDR_MEM_MASK), ++ 0x100); ++ ++ /* Is there EECP ? */ ++ eecp_offset = (grub_le_to_cpu32 (regs[2]) >> 8) & 0xff; ++ ++ /* Determine and change ownership. */ ++ /* EECP offset valid in HCCPARAMS */ ++ /* Ownership can be changed via EECP only */ ++ if (pciid != GRUB_CS5536_PCIID && eecp_offset >= 0x40) ++ { ++ grub_pci_address_t pciaddr_eecp; ++ pciaddr_eecp = grub_pci_make_address (dev, eecp_offset); ++ ++ usblegsup = grub_pci_read (pciaddr_eecp); ++ if (usblegsup & GRUB_XHCI_BIOS_OWNED) ++ { ++ grub_boot_time ("Taking ownership of XHCI controller"); ++ grub_dprintf ("xhci", ++ "XHCI grub_xhci_pci_iter: XHCI owned by: BIOS\n"); ++ /* Ownership change - set OS_OWNED bit */ ++ grub_pci_write (pciaddr_eecp, usblegsup | GRUB_XHCI_OS_OWNED); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ ++ /* Wait for finish of ownership change, XHCI specification ++ * doesn't say how long it can take... */ ++ maxtime = grub_get_time_ms () + 1000; ++ while ((grub_pci_read (pciaddr_eecp) & GRUB_XHCI_BIOS_OWNED) ++ && (grub_get_time_ms () < maxtime)); ++ if (grub_pci_read (pciaddr_eecp) & GRUB_XHCI_BIOS_OWNED) ++ { ++ grub_dprintf ("xhci", ++ "XHCI grub_xhci_pci_iter: XHCI change ownership timeout"); ++ /* Change ownership in "hard way" - reset BIOS ownership */ ++ grub_pci_write (pciaddr_eecp, GRUB_XHCI_OS_OWNED); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ } ++ } ++ else if (usblegsup & GRUB_XHCI_OS_OWNED) ++ /* XXX: What to do in this case - nothing ? Can it happen ? */ ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: XHCI owned by: OS\n"); ++ else ++ { ++ grub_dprintf ("xhci", ++ "XHCI grub_Xhci_pci_iter: XHCI owned by: NONE\n"); ++ /* XXX: What to do in this case ? Can it happen ? ++ * Is code below correct ? */ ++ /* Ownership change - set OS_OWNED bit */ ++ grub_pci_write (pciaddr_eecp, GRUB_XHCI_OS_OWNED); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ } ++ ++ /* Disable SMI, just to be sure. */ ++ pciaddr_eecp = grub_pci_make_address (dev, eecp_offset + 4); ++ grub_pci_write (pciaddr_eecp, 0); ++ /* Ensure PCI register is written */ ++ grub_pci_read (pciaddr_eecp); ++ } ++ ++ grub_dprintf ("xhci", "inithw: XHCI grub_xhci_pci_iter: ownership OK\n"); ++ ++ grub_xhci_init_device (regs); ++ return 0; ++} ++ ++void ++grub_xhci_pci_scan (void) ++{ ++ grub_pci_iterate (grub_xhci_pci_iter, NULL); ++} +diff --git a/grub-core/bus/usb/xhci.c b/grub-core/bus/usb/xhci.c +new file mode 100644 +index 000000000..f4591ffb5 +--- /dev/null ++++ b/grub-core/bus/usb/xhci.c +@@ -0,0 +1,2496 @@ ++/* xhci.c - XHCI Support. */ ++/* ++ * GRUB -- GRand Unified Bootloader ++ * Copyright (C) 2020 9elements Cyber Security ++ * ++ * GRUB is free software: you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation, either version 3 of the License, or ++ * (at your option) any later version. ++ * ++ * GRUB is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with GRUB. If not, see <http://www.gnu.org/licenses/>. ++ * ++ * Big parts of this software are inspired by seabios XHCI implementation ++ * Released under LGPLv3. Credits to: ++ * ++ * Copyright (C) 2013 Gerd Hoffmann <kraxel@redhat.com> ++ * Copyright (C) 2014 Kevin O'Connor <kevin@koconnor.net> ++ */ ++ ++#include <grub/dl.h> ++#include <grub/err.h> ++#include <grub/mm.h> ++#include <grub/usb.h> ++#include <grub/usbtrans.h> ++#include <grub/misc.h> ++#include <grub/time.h> ++#include <grub/loader.h> ++#include <grub/disk.h> ++#include <grub/dma.h> ++#include <grub/cache.h> ++#include <grub/i386/cpuid.h> ++ ++GRUB_MOD_LICENSE ("GPLv3+"); ++ ++/* This simple GRUB implementation of XHCI driver */ ++/* Based on the specification ++ * "eXtensible Host Controller Interface for Universal Serial Bus" Revision 1.2 ++ */ ++ ++ ++#define xhci_get_field(data, field) \ ++ (((data) >> field##_SHIFT) & field##_MASK) ++#define XHCI_PORTSC_PLS_MASK 0xf ++#define XHCI_PORTSC_PLS_SHIFT 5 ++#define XHCI_PORTSC_SPEED_MASK 0xf ++#define XHCI_PORTSC_SPEED_SHIFT 10 ++ ++enum ++{ ++ XHCI_USB_FULLSPEED = 1, ++ XHCI_USB_LOWSPEED, ++ XHCI_USB_HIGHSPEED, ++ XHCI_USB_SUPERSPEED ++}; ++ ++/* Chapter 5.3 Host Controller Capability Registers */ ++struct grub_xhci_caps { ++ grub_uint8_t caplength; ++ grub_uint8_t reserved_01; ++ grub_uint16_t hciversion; ++ grub_uint32_t hcsparams1; ++ grub_uint32_t hcsparams2; ++ grub_uint32_t hcsparams3; ++ grub_uint32_t hccparams; ++ grub_uint32_t dboff; ++ grub_uint32_t rtsoff; ++ grub_uint32_t hccparams2; ++} GRUB_PACKED; ++ ++/* extended capabilities */ ++struct grub_xhci_xcap { ++ grub_uint32_t cap; ++ grub_uint32_t data[]; ++} GRUB_PACKED; ++ ++#define XHCI_CAP_LEGACY_SUPPORT 1 ++#define XHCI_CAP_SUPPORTED_PROTOCOL 2 ++ ++struct xhci_portmap { ++ grub_uint8_t start; ++ grub_uint8_t count; ++} GRUB_PACKED; ++ ++struct grub_xhci_op { ++ grub_uint32_t usbcmd; ++ grub_uint32_t usbsts; ++ grub_uint32_t pagesize; ++ grub_uint32_t reserved_01[2]; ++ grub_uint32_t dnctl; ++ grub_uint32_t crcr_low; ++ grub_uint32_t crcr_high; ++ grub_uint32_t reserved_02[4]; ++ grub_uint32_t dcbaap_low; ++ grub_uint32_t dcbaap_high; ++ grub_uint32_t config; ++} GRUB_PACKED; ++ ++enum ++{ ++ GRUB_XHCI_CMD_RS = (1<<0), ++ GRUB_XHCI_CMD_HCRST = (1<<1), ++ GRUB_XHCI_CMD_INTE = (1<<2), ++ GRUB_XHCI_CMD_HSEE = (1<<3), ++ GRUB_XHCI_CMD_LHCRST = (1<<7), ++ GRUB_XHCI_CMD_CSS = (1<<8), ++ GRUB_XHCI_CMD_CRS = (1<<9), ++ GRUB_XHCI_CMD_EWE = (1<<10), ++ GRUB_XHCI_CMD_EU3S = (1<<11) ++}; ++ ++enum ++{ ++ GRUB_XHCI_STS_HCH = (1<<0), ++ GRUB_XHCI_STS_HSE = (1<<2), ++ GRUB_XHCI_STS_EINT = (1<<3), ++ GRUB_XHCI_STS_PCD = (1<<4), ++ GRUB_XHCI_STS_SSS = (1<<8), ++ GRUB_XHCI_STS_RSS = (1<<9), ++ GRUB_XHCI_STS_SRE = (1<<10), ++ GRUB_XHCI_STS_CNR = (1<<11), ++ GRUB_XHCI_STS_HCE = (1<<12) ++}; ++ ++ ++/* Port Registers Offset */ ++#define GRUB_XHCI_PR_OFFSET 0x400 ++/* Interrupter Registers Offset */ ++#define GRUB_XHCI_IR_OFFSET 0x20 ++ ++/* Port Status and Control registers offsets */ ++ ++/* Chapter 6 Data Structures */ ++#define ALIGN_SPBA 64 ++#define ALIGN_DCBAA 64 ++#define ALIGN_CMD_RING_SEG 64 ++#define ALIGN_EVT_RING_SEG 64 ++#define ALIGN_EVT_RING_TABLE 64 ++#define ALIGN_TRB 16 ++#define ALIGN_INCTX 64 ++#define ALIGN_SLOTCTX 32 ++ ++#define BOUNDARY_RING 0x10000 ++ ++enum ++{ ++ GRUB_XHCI_PORTSC_CCS = (1<<0), ++ GRUB_XHCI_PORTSC_PED = (1<<1), ++ GRUB_XHCI_PORTSC_OCA = (1<<3), ++ GRUB_XHCI_PORTSC_PR = (1<<4), ++ GRUB_XHCI_PORTSC_PP = (1<<9), ++ GRUB_XHCI_PORTSC_SPEED_FULL = (1<<10), ++ GRUB_XHCI_PORTSC_SPEED_LOW = (2<<10), ++ GRUB_XHCI_PORTSC_SPEED_HIGH = (3<<10), ++ GRUB_XHCI_PORTSC_SPEED_SUPER = (4<<10), ++ GRUB_XHCI_PORTSC_LWS = (1<<16), ++ GRUB_XHCI_PORTSC_CSC = (1<<17), ++ GRUB_XHCI_PORTSC_PEC = (1<<18), ++ GRUB_XHCI_PORTSC_WRC = (1<<19), ++ GRUB_XHCI_PORTSC_OCC = (1<<20), ++ GRUB_XHCI_PORTSC_PRC = (1<<21), ++ GRUB_XHCI_PORTSC_PLC = (1<<22), ++ GRUB_XHCI_PORTSC_CEC = (1<<23), ++ GRUB_XHCI_PORTSC_CAS = (1<<24), ++ GRUB_XHCI_PORTSC_WCE = (1<<25), ++ GRUB_XHCI_PORTSC_WDE = (1<<26), ++ GRUB_XHCI_PORTSC_WOE = (1<<27), ++ GRUB_XHCI_PORTSC_DR = (1<<30), ++ GRUB_XHCI_PORTSC_WPR = (1<<31) ++}; ++ ++/* XHCI memory data structs */ ++#define GRUB_XHCI_MAX_ENDPOINTS 32 ++ ++#define GRUB_XHCI_RING_ITEMS 128 ++#define GRUB_XHCI_RING_SIZE (GRUB_XHCI_RING_ITEMS*sizeof(struct grub_xhci_trb)) ++/* ++ * xhci_ring structs are allocated with XHCI_RING_SIZE alignment, ++ * then we can get it from a trb pointer (provided by evt ring). ++ */ ++#define XHCI_RING(_trb) \ ++ ((struct grub_xhci_ring*)((grub_uint32_t)(_trb) & ~(GRUB_XHCI_RING_SIZE-1))) ++ ++/* slot context */ ++struct grub_xhci_slotctx { ++ grub_uint32_t ctx[4]; ++ grub_uint32_t reserved_01[4]; ++} GRUB_PACKED; ++ ++/* endpoint context */ ++struct grub_xhci_epctx { ++ grub_uint32_t ctx[2]; ++ grub_uint32_t deq_low; ++ grub_uint32_t deq_high; ++ grub_uint32_t length; ++ grub_uint32_t reserved_01[3]; ++} GRUB_PACKED; ++ ++/* device context array element */ ++struct grub_xhci_devlist { ++ grub_uint32_t ptr_low; ++ grub_uint32_t ptr_high; ++} GRUB_PACKED; ++ ++/* input context */ ++struct grub_xhci_inctx { ++ grub_uint32_t del; ++ grub_uint32_t add; ++ grub_uint32_t reserved_01[6]; ++} GRUB_PACKED; ++ ++/* transfer block (ring element) */ ++struct grub_xhci_trb { ++ grub_uint32_t ptr_low; ++ grub_uint32_t ptr_high; ++ grub_uint32_t status; ++ grub_uint32_t control; ++} GRUB_PACKED; ++ ++#define TRB_C (1<<0) ++#define TRB_TYPE_SHIFT 10 ++#define TRB_TYPE_MASK 0x3f ++#define TRB_TYPE(t) (((t) >> TRB_TYPE_SHIFT) & TRB_TYPE_MASK) ++ ++#define TRB_EV_ED (1<<2) ++ ++#define TRB_TR_ENT (1<<1) ++#define TRB_TR_ISP (1<<2) ++#define TRB_TR_NS (1<<3) ++#define TRB_TR_CH (1<<4) ++#define TRB_TR_IOC (1<<5) ++#define TRB_TR_IDT (1<<6) ++#define TRB_TR_TBC_SHIFT 7 ++#define TRB_TR_TBC_MASK 0x3 ++#define TRB_TR_BEI (1<<9) ++#define TRB_TR_TLBPC_SHIFT 16 ++#define TRB_TR_TLBPC_MASK 0xf ++#define TRB_TR_FRAMEID_SHIFT 20 ++#define TRB_TR_FRAMEID_MASK 0x7ff ++#define TRB_TR_SIA (1<<31) ++ ++#define TRB_TR_DIR (1<<16) ++ ++#define TRB_CR_SLOTID_SHIFT 24 ++#define TRB_CR_SLOTID_MASK 0xff ++#define TRB_CR_EPID_SHIFT 16 ++#define TRB_CR_EPID_MASK 0x1f ++ ++#define TRB_CR_BSR (1<<9) ++#define TRB_CR_DC (1<<9) ++ ++#define TRB_LK_TC (1<<1) ++ ++#define TRB_INTR_SHIFT 22 ++#define TRB_INTR_MASK 0x3ff ++#define TRB_INTR(t) (((t).status >> TRB_INTR_SHIFT) & TRB_INTR_MASK) ++ ++typedef enum TRBType { ++ TRB_RESERVED = 0, ++ TR_NORMAL, ++ TR_SETUP, ++ TR_DATA, ++ TR_STATUS, ++ TR_ISOCH, ++ TR_LINK, ++ TR_EVDATA, ++ TR_NOOP, ++ CR_ENABLE_SLOT, ++ CR_DISABLE_SLOT, ++ CR_ADDRESS_DEVICE, ++ CR_CONFIGURE_ENDPOINT, ++ CR_EVALUATE_CONTEXT, ++ CR_RESET_ENDPOINT, ++ CR_STOP_ENDPOINT, ++ CR_SET_TR_DEQUEUE, ++ CR_RESET_DEVICE, ++ CR_FORCE_EVENT, ++ CR_NEGOTIATE_BW, ++ CR_SET_LATENCY_TOLERANCE, ++ CR_GET_PORT_BANDWIDTH, ++ CR_FORCE_HEADER, ++ CR_NOOP, ++ ER_TRANSFER = 32, ++ ER_COMMAND_COMPLETE, ++ ER_PORT_STATUS_CHANGE, ++ ER_BANDWIDTH_REQUEST, ++ ER_DOORBELL, ++ ER_HOST_CONTROLLER, ++ ER_DEVICE_NOTIFICATION, ++ ER_MFINDEX_WRAP, ++} TRBType; ++ ++typedef enum TRBCCode { ++ CC_INVALID = 0, ++ CC_SUCCESS, ++ CC_DATA_BUFFER_ERROR, ++ CC_BABBLE_DETECTED, ++ CC_USB_TRANSACTION_ERROR, ++ CC_TRB_ERROR, ++ CC_STALL_ERROR, ++ CC_RESOURCE_ERROR, ++ CC_BANDWIDTH_ERROR, ++ CC_NO_SLOTS_ERROR, ++ CC_INVALID_STREAM_TYPE_ERROR, ++ CC_SLOT_NOT_ENABLED_ERROR, ++ CC_EP_NOT_ENABLED_ERROR, ++ CC_SHORT_PACKET, ++ CC_RING_UNDERRUN, ++ CC_RING_OVERRUN, ++ CC_VF_ER_FULL, ++ CC_PARAMETER_ERROR, ++ CC_BANDWIDTH_OVERRUN, ++ CC_CONTEXT_STATE_ERROR, ++ CC_NO_PING_RESPONSE_ERROR, ++ CC_EVENT_RING_FULL_ERROR, ++ CC_INCOMPATIBLE_DEVICE_ERROR, ++ CC_MISSED_SERVICE_ERROR, ++ CC_COMMAND_RING_STOPPED, ++ CC_COMMAND_ABORTED, ++ CC_STOPPED, ++ CC_STOPPED_LENGTH_INVALID, ++ CC_MAX_EXIT_LATENCY_TOO_LARGE_ERROR = 29, ++ CC_ISOCH_BUFFER_OVERRUN = 31, ++ CC_EVENT_LOST_ERROR, ++ CC_UNDEFINED_ERROR, ++ CC_INVALID_STREAM_ID_ERROR, ++ CC_SECONDARY_BANDWIDTH_ERROR, ++ CC_SPLIT_TRANSACTION_ERROR ++} TRBCCode; ++ ++enum { ++ PLS_U0 = 0, ++ PLS_U1 = 1, ++ PLS_U2 = 2, ++ PLS_U3 = 3, ++ PLS_DISABLED = 4, ++ PLS_RX_DETECT = 5, ++ PLS_INACTIVE = 6, ++ PLS_POLLING = 7, ++ PLS_RECOVERY = 8, ++ PLS_HOT_RESET = 9, ++ PLS_COMPILANCE_MODE = 10, ++ PLS_TEST_MODE = 11, ++ PLS_RESUME = 15, ++}; ++ ++/* event ring segment */ ++struct grub_xhci_er_seg { ++ grub_uint32_t ptr_low; ++ grub_uint32_t ptr_high; ++ grub_uint32_t size; ++ grub_uint32_t reserved_01; ++} GRUB_PACKED; ++ ++struct grub_xhci_ring { ++ struct grub_xhci_trb ring[GRUB_XHCI_RING_ITEMS]; ++ struct grub_xhci_trb evt; ++ grub_uint32_t eidx; ++ grub_uint32_t nidx; ++ grub_uint32_t cs; ++}; ++ ++/* port registers */ ++struct grub_xhci_pr { ++ grub_uint32_t portsc; ++ grub_uint32_t portpmsc; ++ grub_uint32_t portli; ++ grub_uint32_t reserved_01; ++} GRUB_PACKED; ++ ++/* doorbell registers */ ++struct grub_xhci_db { ++ grub_uint32_t doorbell; ++} GRUB_PACKED; ++ ++/* runtime registers */ ++struct grub_xhci_rts { ++ grub_uint32_t mfindex; ++} GRUB_PACKED; ++ ++/* interrupter registers */ ++struct grub_xhci_ir { ++ grub_uint32_t iman; ++ grub_uint32_t imod; ++ grub_uint32_t erstsz; ++ grub_uint32_t reserved_01; ++ grub_uint32_t erstba_low; ++ grub_uint32_t erstba_high; ++ grub_uint32_t erdp_low; ++ grub_uint32_t erdp_high; ++} GRUB_PACKED; ++ ++struct grub_xhci_psid { ++ grub_uint8_t id; ++ grub_uint8_t psie; ++ grub_uint16_t psim; ++ grub_uint64_t bitrate; ++ grub_usb_speed_t grub_usb_speed; ++}; ++ ++struct grub_xhci_psids { ++ grub_uint8_t major; ++ grub_uint8_t minor; ++ struct grub_xhci_psid psids[16]; ++}; ++ ++struct grub_xhci ++{ ++ grub_uint8_t shutdown; /* 1 if preparing shutdown of controller */ ++ /* xhci registers */ ++ volatile struct grub_xhci_caps *caps; /* Capability registers */ ++ volatile struct grub_xhci_op *op; /* Operational registers */ ++ volatile struct grub_xhci_pr *pr; /* Port Registers */ ++ volatile struct grub_xhci_db *db; /* doorbell */ ++ volatile struct grub_xhci_ir *ir; /* Interrupt Registers */ ++ /* devinfo */ ++ grub_uint32_t xcap; ++ grub_uint32_t ports; ++ grub_uint32_t slots; ++ grub_uint8_t flag64; ++ grub_uint16_t spb; ++ grub_uint32_t pagesize; ++ struct xhci_portmap usb2; ++ struct xhci_portmap usb3; ++ struct grub_xhci_psids *psids; ++ /* xhci data structures */ ++ struct grub_pci_dma_chunk *devs_dma; ++ volatile struct grub_xhci_devlist *devs; ++ struct grub_pci_dma_chunk *cmds_dma; ++ volatile struct grub_xhci_ring *cmds; ++ struct grub_pci_dma_chunk *evts_dma; ++ volatile struct grub_xhci_ring *evts; ++ struct grub_pci_dma_chunk *eseg_dma; ++ volatile struct grub_xhci_er_seg *eseg; ++ struct grub_pci_dma_chunk *spba_dma; ++ struct grub_pci_dma_chunk *spad_dma; ++ ++ struct grub_xhci *next; ++}; ++ ++struct grub_xhci_priv { ++ grub_uint8_t slotid; ++ grub_uint32_t max_packet; ++ struct grub_pci_dma_chunk *enpoint_trbs_dma[32]; ++ volatile struct grub_xhci_ring *enpoint_trbs[32]; ++ struct grub_pci_dma_chunk *slotctx_dma; ++}; ++ ++struct grub_xhci_port { ++ grub_uint32_t portsc; ++ grub_uint32_t portpmsc; ++ grub_uint32_t portli; ++ grub_uint32_t reserved_01; ++}; ++ ++struct grub_xhci_transfer_controller_data { ++ grub_uint32_t transfer_size; ++}; ++ ++static struct grub_xhci *xhci; ++ ++/**************************************************************** ++ * general access functions ++ ****************************************************************/ ++ ++static inline void ++grub_xhci_write32(volatile void *addr, grub_uint32_t val) { ++ *(volatile grub_uint32_t *)addr = val; ++} ++static inline void ++grub_xhci_write16(volatile void *addr, grub_uint16_t val) { ++ *(volatile grub_uint16_t *)addr = val; ++} ++static inline void ++grub_xhci_write8(void *addr, grub_uint8_t val) { ++ *(volatile grub_uint8_t *)addr = val; ++} ++ ++static inline grub_uint32_t ++grub_xhci_read32(volatile void *addr) { ++ return grub_le_to_cpu32 (*((volatile grub_uint32_t *)addr)); ++} ++ ++static inline grub_uint16_t ++grub_xhci_read16(volatile void *addr) { ++ return grub_le_to_cpu16 (*((volatile grub_uint32_t *)addr)); ++} ++static inline grub_uint8_t ++grub_xhci_read8(volatile void *addr) { ++ return (*((volatile grub_uint32_t *)addr)); ++} ++ ++static inline grub_uint32_t ++grub_xhci_port_read (struct grub_xhci *x, grub_uint32_t port) ++{ ++ return grub_xhci_read32(&x->pr[port].portsc); ++} ++ ++static inline void ++grub_xhci_port_write (struct grub_xhci *x, grub_uint32_t port, ++ grub_uint32_t and_mask, grub_uint32_t or_mask) ++{ ++ grub_uint32_t reg = grub_xhci_port_read(x, port); ++ reg &= and_mask; ++ reg |= or_mask; ++ ++ grub_xhci_write32(&x->pr[port].portsc, reg); ++} ++ ++/**************************************************************** ++ * xhci status and support functions ++ ****************************************************************/ ++ ++static grub_uint32_t xhci_get_pagesize(struct grub_xhci *x) ++{ ++ /* Chapter 5.4.3 Page Size Register (PAGESIZE) */ ++ for (grub_uint8_t i = 0; i < 16; i++) ++ { ++ if (grub_xhci_read32(&x->op->pagesize) & (1 << i)) ++ return 1 << (12 + i); ++ } ++ return 0; ++} ++ ++static grub_uint8_t xhci_is_halted(struct grub_xhci *x) ++{ ++ return !!(grub_xhci_read32(&x->op->usbsts) & 1); ++} ++ ++/* Just for debugging */ ++static void xhci_check_status(struct grub_xhci *x) ++{ ++ grub_uint32_t reg; ++ ++ reg = grub_xhci_read32(&x->op->usbsts); ++ if (reg & 1) ++ grub_dprintf("xhci", "%s: xHCI halted\n", __func__); ++ if (reg & 2) ++ grub_dprintf("xhci", "%s: Host system error detected\n", __func__); ++ if (reg & (1 << 12)) ++ grub_dprintf("xhci", "%s: Internal error detected\n", __func__); ++ reg = grub_xhci_read32(&x->op->crcr_low); ++ if (reg & (1 << 3)) ++ grub_dprintf("xhci", "%s: Command ring running\n", __func__); ++} ++ ++/* xhci_memalign_dma32 allocates DMA memory satisfying alignment and boundary ++ * requirements without wasting to much memory */ ++static struct grub_pci_dma_chunk * ++xhci_memalign_dma32(grub_size_t align, ++ grub_size_t size, ++ grub_size_t boundary) ++{ ++ struct grub_pci_dma_chunk *tmp; ++ const grub_uint32_t mask = boundary - 1; ++ grub_uint32_t start, end; ++ ++ /* Allocate some memory and check if it doesn't cross boundary */ ++ tmp = grub_memalign_dma32(align, size); ++ start = grub_dma_get_phys(tmp); ++ end = start + size - 1; ++ if ((start & mask) == (end & mask)) ++ return tmp; ++ /* Buffer isn't usable, allocate bigger one */ ++ grub_dma_free(tmp); ++ ++ return grub_memalign_dma32(boundary, size); ++} ++ ++/**************************************************************** ++ * helper functions for in context DMA buffer ++ ****************************************************************/ ++ ++static int ++grub_xhci_inctx_size(struct grub_xhci *x) ++{ ++ const grub_uint8_t cnt = GRUB_XHCI_MAX_ENDPOINTS + 1; ++ return (sizeof(struct grub_xhci_inctx) * cnt) << x->flag64; ++} ++ ++static void ++grub_xhci_inctx_sync_dma_caches(struct grub_xhci *x, struct grub_pci_dma_chunk *inctx) ++{ ++ grub_arch_sync_dma_caches(inctx, grub_xhci_inctx_size(x)); ++} ++ ++static struct grub_pci_dma_chunk * ++grub_xhci_alloc_inctx(struct grub_xhci *x, int maxepid, ++ struct grub_usb_device *dev) ++{ ++ int size = grub_xhci_inctx_size(x); ++ struct grub_pci_dma_chunk *dma = xhci_memalign_dma32(ALIGN_INCTX, size, ++ x->pagesize); ++ if (!dma) ++ return NULL; ++ ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(dma); ++ grub_memset((void *)in, 0, size); ++ ++ struct grub_xhci_slotctx *slot = (void*)&in[1 << x->flag64]; ++ slot->ctx[0] |= maxepid << 27; /* context entries */ ++ grub_dprintf("xhci", "%s: speed=%d root_port=%d\n", __func__, dev->speed, dev->root_port); ++ switch (dev->speed) { ++ case GRUB_USB_SPEED_FULL: ++ slot->ctx[0] |= XHCI_USB_FULLSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_HIGH: ++ slot->ctx[0] |= XHCI_USB_HIGHSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_LOW: ++ slot->ctx[0] |= XHCI_USB_LOWSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_SUPER: ++ slot->ctx[0] |= XHCI_USB_SUPERSPEED << 20; ++ break; ++ case GRUB_USB_SPEED_NONE: ++ slot->ctx[0] |= 0 << 20; ++ break; ++ } ++ ++ /* Route is greater zero on devices that are connected to a non root hub */ ++ if (dev->route) ++ { ++ /* FIXME: Implement this code for non SuperSpeed hub devices */ ++ } ++ slot->ctx[0] |= dev->route; ++ slot->ctx[1] |= (dev->root_port+1) << 16; ++ ++ grub_arch_sync_dma_caches(in, size); ++ ++ return dma; ++} ++ ++/**************************************************************** ++ * xHCI event processing ++ ****************************************************************/ ++ ++/* Dequeue events on the XHCI event ring generated by the hardware */ ++static void xhci_process_events(struct grub_xhci *x) ++{ ++ volatile struct grub_xhci_ring *evts = x->evts; ++ /* XXX invalidate caches */ ++ ++ for (;;) { ++ /* check for event */ ++ grub_uint32_t nidx = grub_xhci_read32(&evts->nidx); ++ grub_uint32_t cs = grub_xhci_read32(&evts->cs); ++ volatile struct grub_xhci_trb *etrb = evts->ring + nidx; ++ grub_uint32_t control = grub_xhci_read32(&etrb->control); ++ if ((control & TRB_C) != (cs ? 1 : 0)) ++ return; ++ ++ /* process event */ ++ grub_uint32_t evt_type = TRB_TYPE(control); ++ grub_uint32_t evt_cc = (grub_xhci_read32(&etrb->status) >> 24) & 0xff; ++ ++ switch (evt_type) ++ { ++ case ER_TRANSFER: ++ case ER_COMMAND_COMPLETE: ++ { ++ struct grub_xhci_trb *rtrb = (void*)grub_xhci_read32(&etrb->ptr_low); ++ struct grub_xhci_ring *ring = XHCI_RING(rtrb); ++ volatile struct grub_xhci_trb *evt = &ring->evt; ++ grub_uint32_t eidx = rtrb - ring->ring + 1; ++ grub_dprintf("xhci", "%s: ring %p [trb %p, evt %p, type %d, eidx %d, cc %d]\n", ++ __func__, ring, rtrb, evt, evt_type, eidx, evt_cc); ++ *evt = *etrb; ++ grub_xhci_write32(&ring->eidx, eidx); ++ break; ++ } ++ case ER_PORT_STATUS_CHANGE: ++ { ++ /* Nothing to do here. grub_xhci_detect_dev will handle it */ ++ break; ++ } ++ default: ++ { ++ grub_dprintf("xhci", "%s: unknown event, type %d, cc %d\n", ++ __func__, evt_type, evt_cc); ++ break; ++ } ++ } ++ ++ /* move ring index, notify xhci */ ++ nidx++; ++ if (nidx == GRUB_XHCI_RING_ITEMS) ++ { ++ nidx = 0; ++ cs = cs ? 0 : 1; ++ grub_xhci_write32(&evts->cs, cs); ++ } ++ grub_xhci_write32(&evts->nidx, nidx); ++ volatile struct grub_xhci_ir *ir = x->ir; ++ grub_uint32_t erdp = (grub_uint32_t)(evts->ring + nidx); ++ grub_xhci_write32(&ir->erdp_low, erdp); ++ grub_xhci_write32(&ir->erdp_high, 0); ++ } ++} ++ ++/**************************************************************** ++ * TRB handling ++ ****************************************************************/ ++ ++/* Signal the hardware to process events on a TRB ring */ ++static void xhci_doorbell(struct grub_xhci *x, grub_uint32_t slotid, grub_uint32_t value) ++{ ++ xhci_check_status(x); ++ grub_dprintf("xhci", "%s: slotid %d, epid %d\n", __func__, slotid, value); ++ grub_xhci_write32(&x->db[slotid].doorbell, value); ++} ++ ++/* Check if a ring has any pending TRBs */ ++static int xhci_ring_busy(volatile struct grub_xhci_ring *ring) ++{ ++ grub_uint32_t eidx = grub_xhci_read32(&ring->eidx); ++ grub_uint32_t nidx = grub_xhci_read32(&ring->nidx); ++ ++ return (eidx != nidx); ++} ++ ++/* Returns free space in ring */ ++static int xhci_ring_free_space(volatile struct grub_xhci_ring *ring) ++{ ++ grub_uint32_t eidx = grub_xhci_read32(&ring->eidx); ++ grub_uint32_t nidx = grub_xhci_read32(&ring->nidx); ++ ++ /* nidx is never 0, so reduce ring buffer size by one */ ++ return (eidx > nidx) ? eidx-nidx ++ : (ARRAY_SIZE(ring->ring) - 1) - nidx + eidx; ++} ++ ++/* Check if a ring is full */ ++static int xhci_ring_full(volatile struct grub_xhci_ring *ring) ++{ ++ /* Might need to insert one link TRB */ ++ return xhci_ring_free_space(ring) <= 1; ++} ++ ++/* Check if a ring is almost full */ ++static int xhci_ring_almost_full(volatile struct grub_xhci_ring *ring) ++{ ++ /* Might need to insert one link TRB */ ++ return xhci_ring_free_space(ring) <= 2; ++} ++ ++/* Wait for a ring to empty (all TRBs processed by hardware) */ ++static int xhci_event_wait(struct grub_xhci *x, ++ volatile struct grub_xhci_ring *ring, ++ grub_uint32_t timeout) ++{ ++ grub_uint32_t end = grub_get_time_ms () + timeout; ++ ++ for (;;) ++ { ++ xhci_check_status(x); ++ xhci_process_events(x); ++ if (!xhci_ring_busy(ring)) ++ { ++ grub_uint32_t status = ring->evt.status; ++ return (status >> 24) & 0xff; ++ } ++ if (grub_get_time_ms () > end) ++ { ++ xhci_check_status(x); ++ grub_dprintf("xhci", "%s: Timeout waiting for event\n", __func__); ++ return -1; ++ } ++ } ++} ++ ++/* Add a TRB to the given ring, either regular or inline */ ++static void xhci_trb_fill(volatile struct grub_xhci_ring *ring, ++ grub_uint64_t ptr, grub_uint32_t xferlen, ++ grub_uint32_t flags) ++{ ++ volatile struct grub_xhci_trb *dst = &ring->ring[ring->nidx]; ++ dst->ptr_low = ptr & 0xffffffff; ++ dst->ptr_high = ptr >> 32; ++ dst->status = xferlen; ++ dst->control = flags | (ring->cs ? TRB_C : 0); ++ ++ grub_arch_sync_dma_caches(dst, sizeof(ring->ring[0])); ++} ++ ++/* ++ * Queue a TRB onto a ring. ++ * ++ * The caller must pass a pointer to the data in physical address-space or the ++ * data itself (but no more than 8 bytes) in data_or_addr. Inline data must have ++ * the flag TRB_TR_IDT set. ++ */ ++static void xhci_trb_queue(volatile struct grub_xhci_ring *ring, ++ grub_uint64_t data_or_addr, ++ grub_uint32_t xferlen, grub_uint32_t flags) ++{ ++ grub_dprintf("xhci", "%s: ring %p data %llx len %d flags 0x%x remain 0x%x\n", __func__, ++ ring, data_or_addr, xferlen & 0x1ffff, flags, xferlen >> 17); ++ ++ if (xhci_ring_full(ring)) ++ { ++ grub_dprintf("xhci", "%s: ERROR: ring %p is full, discarding TRB\n", ++ __func__, ring); ++ return; ++ } ++ ++ if (ring->nidx >= ARRAY_SIZE(ring->ring) - 1) ++ { ++ /* Reset to command buffer pointer to the first element */ ++ xhci_trb_fill(ring, (grub_addr_t)ring->ring, 0, (TR_LINK << 10) | TRB_LK_TC); ++ ring->nidx = 0; ++ ring->cs ^= 1; ++ grub_dprintf("xhci", "%s: ring %p [linked]\n", __func__, ring); ++ } ++ ++ xhci_trb_fill(ring, data_or_addr, xferlen, flags); ++ ring->nidx++; ++ grub_dprintf("xhci", "%s: ring %p [nidx %d, len %d]\n", ++ __func__, ring, ring->nidx, xferlen); ++} ++ ++/* ++ * Queue a TRB onto a ring and flush it if necessary. ++ * ++ * The caller must pass a pointer to the data in physical address-space or the ++ * data itself (but no more than 8 bytes) in data_or_addr. Inline data must have ++ * the flag TRB_TR_IDT set. ++ */ ++static int xhci_trb_queue_and_flush(struct grub_xhci *x, ++ grub_uint32_t slotid, ++ grub_uint32_t epid, ++ volatile struct grub_xhci_ring *ring, ++ grub_uint64_t data_or_addr, ++ grub_uint32_t xferlen, grub_uint32_t flags) ++{ ++ grub_uint8_t submit = 0; ++ if (xhci_ring_almost_full(ring)) ++ { ++ grub_dprintf("xhci", "%s: almost full e %d n %d\n", __func__, ring->eidx, ring->nidx); ++ flags |= TRB_TR_IOC; ++ submit = 1; ++ } ++ /* Note: xhci_trb_queue might queue on or two elements, if the end of the TRB ++ * has been reached. The caller must account for that when filling the TRB. */ ++ xhci_trb_queue(ring, data_or_addr, xferlen, flags); ++ /* Submit if less no free slot is remaining, we might need an additional ++ * one on the next call to this function. */ ++ if (submit) ++ { ++ xhci_doorbell(x, slotid, epid); ++ int rc = xhci_event_wait(x, ring, 1000); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ return rc; ++ } ++ return 0; ++} ++ ++/**************************************************************** ++ * xHCI command functions ++ ****************************************************************/ ++ ++/* Submit a command to the xHCI command TRB */ ++static int xhci_cmd_submit(struct grub_xhci *x, ++ struct grub_pci_dma_chunk *inctx_dma, ++ grub_uint32_t flags) ++{ ++ volatile struct grub_xhci_inctx *inctx; ++ /* Don't submit if halted, it will fail */ ++ if (xhci_is_halted(x)) ++ return -1; ++ ++ if (inctx_dma) ++ { ++ grub_xhci_inctx_sync_dma_caches(x, inctx_dma); ++ ++ inctx = grub_dma_get_virt(inctx_dma); ++ ++ struct grub_xhci_slotctx *slot = (void*)&inctx[1 << x->flag64]; ++ grub_uint32_t port = ((slot->ctx[1] >> 16) & 0xff) - 1; ++ grub_uint32_t portsc = grub_xhci_port_read(x, port); ++ if (!(portsc & GRUB_XHCI_PORTSC_CCS)) ++ { ++ grub_dprintf("xhci", "%s: root port %d no longer connected\n", ++ __func__, port); ++ return -1; ++ } ++ xhci_trb_queue(x->cmds, grub_dma_get_phys(inctx_dma), 0, flags); ++ } ++ else ++ { ++ xhci_trb_queue(x->cmds, 0, 0, flags); ++ } ++ ++ xhci_doorbell(x, 0, 0); ++ int rc = xhci_event_wait(x, x->cmds, 1000); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ ++ return rc; ++} ++ ++static int xhci_cmd_enable_slot(struct grub_xhci *x) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_ENABLE_SLOT << 10); ++ ++ grub_dprintf("xhci", "%s:\n", __func__); ++ int cc = xhci_cmd_submit(x, NULL, flags); ++ if (cc != CC_SUCCESS) ++ return -1; ++ grub_dprintf("xhci", "%s: %p\n", __func__, &x->cmds->evt.control); ++ grub_dprintf("xhci", "%s: %x\n", __func__, grub_xhci_read32(&x->cmds->evt.control)); ++ ++ return (grub_xhci_read32(&x->cmds->evt.control) >> 24) & 0xff; ++} ++ ++static int xhci_cmd_disable_slot(struct grub_xhci *x, grub_uint32_t slotid) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_DISABLE_SLOT << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, NULL, flags); ++} ++ ++static int xhci_cmd_stop_endpoint(struct grub_xhci *x, grub_uint32_t slotid ++ , grub_uint32_t epid ++ , grub_uint32_t suspend) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_STOP_ENDPOINT << 10); ++ flags |= (epid << 16); ++ flags |= (suspend << 23) ; ++ flags |= (slotid << 24); ++ ++ return xhci_cmd_submit(x, NULL, flags); ++} ++ ++static int xhci_cmd_reset_endpoint(struct grub_xhci *x, grub_uint32_t slotid ++ , grub_uint32_t epid ++ , grub_uint32_t preserve) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (preserve << 9); ++ flags |= (CR_RESET_ENDPOINT << 10); ++ flags |= (epid << 16); ++ flags |= (slotid << 24); ++ ++ return xhci_cmd_submit(x, NULL, flags); ++} ++ ++static int xhci_cmd_set_dequeue_pointer(struct grub_xhci *x, grub_uint32_t slotid ++ , grub_uint32_t epid ++ , grub_addr_t tr_deque_pointer) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_SET_TR_DEQUEUE << 10); ++ flags |= (epid << 16); ++ flags |= (slotid << 24); ++ ++ xhci_trb_queue(x->cmds, tr_deque_pointer, 0, flags); ++ ++ xhci_doorbell(x, 0, 0); ++ int rc = xhci_event_wait(x, x->cmds, 1000); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ ++ return rc; ++} ++ ++static int xhci_cmd_address_device(struct grub_xhci *x, grub_uint32_t slotid, ++ struct grub_pci_dma_chunk *inctx_dma) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_ADDRESS_DEVICE << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, inctx_dma, flags); ++} ++ ++static int xhci_cmd_configure_endpoint(struct grub_xhci *x, grub_uint32_t slotid, ++ struct grub_pci_dma_chunk *inctx_dma) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_CONFIGURE_ENDPOINT << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, inctx_dma, flags); ++} ++ ++static int xhci_cmd_evaluate_context(struct grub_xhci *x, grub_uint32_t slotid, ++ struct grub_pci_dma_chunk *inctx_dma) ++{ ++ grub_uint32_t flags = 0; ++ flags |= (CR_EVALUATE_CONTEXT << 10); ++ flags |= (slotid << 24); ++ ++ grub_dprintf("xhci", "%s: slotid %d\n", __func__, slotid); ++ return xhci_cmd_submit(x, inctx_dma, flags); ++} ++ ++/**************************************************************** ++ * xHCI host controller initialization ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_reset (struct grub_xhci *x) ++{ ++ grub_uint32_t reg; ++ grub_uint32_t end; ++ ++ reg = grub_xhci_read32(&x->op->usbcmd); ++ if (reg & GRUB_XHCI_CMD_RS) ++ { ++ reg &= ~GRUB_XHCI_CMD_RS; ++ grub_xhci_write32(&x->op->usbcmd, reg); ++ ++ end = grub_get_time_ms () + 32; ++ while (grub_xhci_read32(&x->op->usbcmd) & GRUB_XHCI_STS_HCH) ++ { ++ if (grub_get_time_ms () > end) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ grub_millisleep(1); ++ } ++ } ++ ++ grub_dprintf("xhci", "grub_xhci_reset: resetting HC\n"); ++ grub_xhci_write32(&x->op->usbcmd, GRUB_XHCI_CMD_HCRST); ++ ++ /* Wait for device to complete reset and be enabled */ ++ end = grub_get_time_ms () + 100; ++ while (grub_xhci_read32(&x->op->usbcmd) & GRUB_XHCI_CMD_HCRST) ++ { ++ if (grub_get_time_ms () > end) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ grub_millisleep(1); ++ } ++ ++ /* Wait for device to complete reset and be enabled */ ++ end = grub_get_time_ms () + 100; ++ while (grub_xhci_read32(&x->op->usbsts) & GRUB_XHCI_STS_CNR) ++ { ++ if (grub_get_time_ms () > end) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ grub_millisleep(1); ++ } ++ ++ grub_xhci_write32(&x->op->config, x->slots); ++ grub_xhci_write32(&x->op->dcbaap_low, grub_dma_get_phys(x->devs_dma)); ++ grub_xhci_write32(&x->op->dcbaap_high, 0); ++ grub_xhci_write32(&x->op->crcr_low, grub_dma_get_phys(x->cmds_dma)| 1); ++ grub_xhci_write32(&x->op->crcr_high, 0); ++ x->cmds->cs = 1; ++ ++ grub_arch_sync_dma_caches(x->cmds, sizeof(*x->cmds)); ++ ++ x->eseg->ptr_low = grub_dma_get_phys(x->evts_dma); ++ x->eseg->ptr_high = 0; ++ x->eseg->size = GRUB_XHCI_RING_ITEMS; ++ ++ grub_arch_sync_dma_caches(x->eseg, sizeof(*x->eseg)); ++ ++ grub_xhci_write32(&x->ir->erstsz, 1); ++ grub_xhci_write32(&x->ir->erdp_low, grub_dma_get_phys(x->evts_dma)); ++ grub_xhci_write32(&x->ir->erdp_high, 0); ++ grub_xhci_write32(&x->ir->erstba_low, grub_dma_get_phys(x->eseg_dma)); ++ grub_xhci_write32(&x->ir->erstba_high, 0); ++ x->evts->cs = 1; ++ ++ grub_arch_sync_dma_caches(x->evts, sizeof(*x->eseg)); ++ ++ xhci_check_status(x); ++ ++ grub_dprintf ("xhci", "XHCI OP COMMAND: %08x\n", ++ grub_xhci_read32 (&x->op->usbcmd)); ++ grub_dprintf ("xhci", "XHCI OP STATUS: %08x\n", ++ grub_xhci_read32 (&x->op->usbsts)); ++ grub_dprintf ("xhci", "XHCI OP PAGESIZE: %08x\n", ++ grub_xhci_read32 (&x->op->pagesize)); ++ grub_dprintf ("xhci", "XHCI OP DNCTRL: %08x\n", ++ grub_xhci_read32 (&x->op->dnctl)); ++ grub_dprintf ("xhci", "XHCI OP CRCR_LOW: %08x\n", ++ grub_xhci_read32 (&x->op->crcr_low)); ++ grub_dprintf ("xhci", "XHCI OP CRCR_HIGH: %08x\n", ++ grub_xhci_read32 (&x->op->crcr_high)); ++ grub_dprintf ("xhci", "XHCI OP DCBAAP_LOW: %08x\n", ++ grub_xhci_read32 (&x->op->dcbaap_low)); ++ grub_dprintf ("xhci", "XHCI OP DCBAAP_HIGH: %08x\n", ++ grub_xhci_read32 (&x->op->dcbaap_high)); ++ grub_dprintf ("xhci", "XHCI OP CONFIG: %08x\n", ++ grub_xhci_read32 (&x->op->config)); ++ grub_dprintf ("xhci", "XHCI IR ERSTSZ: %08x\n", ++ grub_xhci_read32 (&x->ir->erstsz)); ++ grub_dprintf ("xhci", "XHCI IR ERDP: %08x\n", ++ grub_xhci_read32 (&x->ir->erdp_low)); ++ grub_dprintf ("xhci", "XHCI IR ERSTBA: %08x\n", ++ grub_xhci_read32 (&x->ir->erstba_low)); ++ ++ xhci_check_status(x); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static grub_usb_err_t ++grub_xhci_request_legacy_handoff(volatile struct grub_xhci_xcap *xcap) ++{ ++ grub_uint32_t end; ++ ++ end = grub_get_time_ms () + 10; ++ for (;;) ++ { ++ grub_uint32_t cap = grub_xhci_read32(&xcap->cap); ++ if (cap & (1 << 16)) ++ grub_xhci_write32(&xcap->cap, cap | (1 << 24)); ++ else ++ break; ++ ++ if (grub_get_time_ms () > end) ++ { ++ grub_dprintf ("xhci","ERROR: %s TIMEOUT\n", __func__); ++ return GRUB_USB_ERR_TIMEOUT; ++ } ++ grub_millisleep(1); ++ } ++ return GRUB_USB_ERR_NONE; ++} ++ ++static void ++grub_xhci_fill_default_speed_mapping(struct grub_xhci_psids *ids) ++{ ++ /* Chapter 7.2.2.1.1 "Default USB Speed ID Mapping" */ ++ ids->psids[0].id = 1; ++ ids->psids[0].psie = 2; ++ ids->psids[0].psim = 12; ++ ids->psids[1].id = 2; ++ ids->psids[1].psie = 1; ++ ids->psids[1].psim = 1500; ++ ids->psids[2].id = 3; ++ ids->psids[2].psie = 2; ++ ids->psids[2].psim = 480; ++ ids->psids[3].id = 4; ++ ids->psids[3].psie = 3; ++ ids->psids[3].psim = 5; ++ ids->psids[4].id = 5; ++ ids->psids[4].psie = 3; ++ ids->psids[4].psim = 10; ++ ids->psids[5].id = 6; ++ ids->psids[5].psie = 3; ++ ids->psids[5].psim = 10; ++ ids->psids[6].id = 7; ++ ids->psids[6].psie = 3; ++ ids->psids[6].psim = 20; ++} ++ ++static void ++grub_xhci_calc_speed_mapping(struct grub_xhci_psids *ids) ++{ ++ const grub_uint64_t mult[4] = {1ULL, 1000ULL, 1000000ULL, 1000000000ULL}; ++ ++ for (grub_uint8_t i = 0; i < 16; i++) ++ { ++ if (ids->psids[i].id == 0) ++ continue; ++ ids->psids[i].bitrate = mult[ids->psids[i].psie & 3] * (grub_uint64_t)ids->psids[i].psim; ++ if (ids->psids[i].bitrate < 12000000ULL) ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_LOW; ++ else if (ids->psids[i].bitrate < 480000000ULL) ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_FULL; ++ else if (ids->psids[i].bitrate > 1200000000ULL) ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_SUPER; ++ else ++ ids->psids[i].grub_usb_speed = GRUB_USB_SPEED_HIGH; ++ } ++} ++ ++ ++/* PCI iteration function... */ ++void ++grub_xhci_init_device (volatile void *regs) ++{ ++ struct grub_xhci *x; ++ grub_uint32_t hcs1, hcc, reg; ++ ++ /* Allocate memory for the controller and fill basic values. */ ++ x = grub_zalloc (sizeof (*x)); ++ if (!x) ++ { ++ grub_dprintf("xhci", "Failed to allocate memory\n"); ++ return; ++ } ++ x->caps = (volatile struct grub_xhci_caps *) regs; ++ x->op = (volatile struct grub_xhci_op *) (((grub_uint8_t *)regs) + ++ grub_xhci_read8(&x->caps->caplength)); ++ x->pr = (volatile struct grub_xhci_pr *) (((grub_uint8_t *)x->op) + ++ GRUB_XHCI_PR_OFFSET); ++ x->db = (volatile struct grub_xhci_db *) (((grub_uint8_t *)regs) + ++ grub_xhci_read32(&x->caps->dboff)); ++ x->ir = (volatile struct grub_xhci_ir *) (((grub_uint8_t *)regs) + ++ grub_xhci_read32(&x->caps->rtsoff) + GRUB_XHCI_IR_OFFSET); ++ ++ grub_dprintf ("xhci", "XHCI init: CAPLENGTH: 0x%02x\n", ++ grub_xhci_read8 (&x->caps->caplength)); ++ grub_dprintf ("xhci", "XHCI init: HCIVERSION: 0x%04x\n", ++ grub_xhci_read16 (&x->caps->hciversion)); ++ grub_dprintf ("xhci", "XHCI init: HCSPARAMS1: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams1)); ++ grub_dprintf ("xhci", "XHCI init: HCSPARAMS2: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams2)); ++ grub_dprintf ("xhci", "XHCI init: HCSPARAMS3: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams3)); ++ grub_dprintf ("xhci", "XHCI init: HCCPARAMS: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->hcsparams3)); ++ grub_dprintf ("xhci", "XHCI init: DBOFF: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->dboff)); ++ grub_dprintf ("xhci", "XHCI init: RTOFF: 0x%08x\n", ++ grub_xhci_read32 (&x->caps->rtsoff)); ++ ++ hcs1 = grub_xhci_read32(&x->caps->hcsparams1); ++ hcc = grub_xhci_read32(&x->caps->hccparams); ++ x->ports = (grub_uint32_t) ((hcs1 >> 24) & 0xff); ++ x->slots = (grub_uint32_t) (hcs1 & 0xff); ++ x->xcap = (grub_uint32_t) ((hcc >> 16) & 0xffff) * sizeof(grub_uint32_t); ++ x->flag64 = (grub_uint8_t) ((hcc & 0x04) ? 1 : 0); ++ grub_dprintf("xhci", "XHCI init: %d ports, %d slots, %d byte contexts\n" ++ , x->ports, x->slots, x->flag64 ? 64 : 32); ++ ++ x->psids = grub_zalloc (sizeof (struct grub_xhci_psids) * x->ports); ++ if (x->xcap) ++ { ++ grub_uint32_t off; ++ volatile grub_uint8_t *addr = (grub_uint8_t *) x->caps + x->xcap; ++ do ++ { ++ volatile struct grub_xhci_xcap *xcap = (void *)addr; ++ grub_uint32_t ports, name, cap = grub_xhci_read32(&xcap->cap); ++ switch (cap & 0xff) { ++ case XHCI_CAP_LEGACY_SUPPORT: ++ { ++ if (grub_xhci_request_legacy_handoff(xcap) != GRUB_USB_ERR_NONE) ++ { ++ grub_dprintf("xhci", "XHCI init: Failed to get xHCI ownership\n"); ++ goto fail; ++ } ++ break; ++ } ++ case XHCI_CAP_SUPPORTED_PROTOCOL: ++ { ++ name = grub_xhci_read32(&xcap->data[0]); ++ ports = grub_xhci_read32(&xcap->data[1]); ++ const grub_uint8_t major = (cap >> 24) & 0xff; ++ const grub_uint8_t minor = (cap >> 16) & 0xff; ++ const grub_uint8_t psic = (ports >> 28) & 0xf; ++ const grub_uint8_t count = (ports >> 8) & 0xff; ++ const grub_uint8_t start = (ports >> 0) & 0xff; ++ grub_dprintf("xhci", "XHCI init: protocol %c%c%c%c %x.%02x" ++ ", %d ports (offset %d), def %x, psic %d\n" ++ , (name >> 0) & 0xff ++ , (name >> 8) & 0xff ++ , (name >> 16) & 0xff ++ , (name >> 24) & 0xff ++ , major, minor ++ , count, start ++ , ports >> 16 ++ , psic); ++ if (name == 0x20425355 /* "USB " */) ++ { ++ if (major == 2) ++ { ++ x->usb2.start = start; ++ x->usb2.count = count; ++ } ++ else if (major == 3) ++ { ++ x->usb3.start = start; ++ x->usb3.count = count; ++ } ++ ++ for (grub_uint32_t p = start - 1; p < start + count - 1UL; p++) ++ { ++ x->psids[p].major = major; ++ x->psids[p].minor = minor; ++ grub_xhci_fill_default_speed_mapping(&x->psids[p]); ++ for (grub_uint8_t i = 0; i < psic; i++) ++ { ++ grub_uint32_t psid = grub_xhci_read32(&xcap->data[3 + i]); ++ x->psids[p].psids[i].id = (psid >> 0) & 0xf; ++ x->psids[p].psids[i].psie = (psid >> 4) & 0x3; ++ x->psids[p].psids[i].psim = (psid >> 16) & 0xfffff; ++ } ++ grub_xhci_calc_speed_mapping(&x->psids[p]); ++ } ++ } ++ ++ break; ++ } ++ default: ++ { ++ grub_dprintf("xhci", "XHCI extcap 0x%x @ %p\n", cap & 0xff, addr); ++ break; ++ } ++ } ++ off = (cap >> 8) & 0xff; ++ addr += off << 2; ++ } ++ while (off > 0); ++ } ++ ++ x->pagesize = xhci_get_pagesize(x); ++ grub_dprintf("xhci", "XHCI init: Minimum supported page size 0x%x\n", ++ x->pagesize); ++ ++ /* Chapter 6.1 Device Context Base Address Array */ ++ x->devs_dma = xhci_memalign_dma32(ALIGN_DCBAA, ++ sizeof(*x->devs) * (x->slots + 1), ++ x->pagesize); ++ if (!x->devs_dma) ++ goto fail; ++ x->devs = grub_dma_get_virt(x->devs_dma); ++ grub_memset((void *)x->devs, 0, sizeof(*x->devs) * (x->slots + 1)); ++ grub_arch_sync_dma_caches(x->devs, sizeof(*x->devs) * (x->slots + 1)); ++ grub_dprintf ("xhci", "XHCI init: device memory %p (%x)\n", ++ grub_dma_get_virt(x->devs_dma), ++ grub_dma_get_phys(x->devs_dma)); ++ ++ /* Chapter 6.5 Event Ring Segment Table */ ++ x->eseg_dma = xhci_memalign_dma32(ALIGN_EVT_RING_TABLE, sizeof(*x->eseg), 0); ++ if (!x->eseg_dma) ++ goto fail; ++ x->eseg = grub_dma_get_virt(x->eseg_dma); ++ grub_memset((void *)x->eseg, 0, sizeof(*x->eseg)); ++ grub_arch_sync_dma_caches(x->eseg, sizeof(*x->eseg)); ++ grub_dprintf ("xhci", "XHCI init: event ring table memory %p (%x)\n", ++ grub_dma_get_virt(x->eseg_dma), ++ grub_dma_get_phys(x->eseg_dma)); ++ ++ x->cmds_dma = xhci_memalign_dma32(ALIGN_CMD_RING_SEG, sizeof(*x->cmds), ++ BOUNDARY_RING); ++ if (!x->cmds_dma) ++ goto fail; ++ x->cmds = grub_dma_get_virt(x->cmds_dma); ++ grub_memset((void *)x->cmds, 0, sizeof(*x->cmds)); ++ grub_arch_sync_dma_caches(x->cmds, sizeof(*x->cmds)); ++ grub_dprintf ("xhci", "XHCI init: command ring memory %p (%x)\n", ++ grub_dma_get_virt(x->cmds_dma), ++ grub_dma_get_phys(x->cmds_dma)); ++ ++ x->evts_dma = xhci_memalign_dma32(ALIGN_EVT_RING_SEG, sizeof(*x->evts), ++ BOUNDARY_RING); ++ if (!x->evts_dma) ++ goto fail; ++ x->evts = grub_dma_get_virt(x->evts_dma); ++ grub_memset((void *)x->evts, 0, sizeof(*x->evts)); ++ grub_arch_sync_dma_caches(x->evts, sizeof(*x->evts)); ++ grub_dprintf ("xhci", "XHCI init: event ring memory %p (%x)\n", ++ grub_dma_get_virt(x->evts_dma), ++ grub_dma_get_phys(x->evts_dma)); ++ ++ /* Chapter 4.20 Scratchpad Buffers */ ++ reg = grub_xhci_read32(&x->caps->hcsparams2); ++ x->spb = (reg >> 21 & 0x1f) << 5 | reg >> 27; ++ if (x->spb) ++ { ++ volatile grub_uint64_t *spba; ++ grub_dprintf("xhci", "XHCI init: set up %d scratch pad buffers\n", ++ x->spb); ++ x->spba_dma = xhci_memalign_dma32(ALIGN_SPBA, sizeof(*spba) * x->spb, ++ x->pagesize); ++ if (!x->spba_dma) ++ goto fail; ++ ++ x->spad_dma = xhci_memalign_dma32(x->pagesize, x->pagesize * x->spb, ++ x->pagesize); ++ if (!x->spad_dma) ++ { ++ grub_dma_free(x->spba_dma); ++ goto fail; ++ } ++ ++ spba = grub_dma_get_virt(x->spba_dma); ++ for (grub_uint32_t i = 0; i < x->spb; i++) ++ spba[i] = (grub_addr_t)grub_dma_get_phys(x->spad_dma) + (i * x->pagesize); ++ grub_arch_sync_dma_caches(x->spba_dma, sizeof(*spba) * x->spb); ++ ++ x->devs[0].ptr_low = grub_dma_get_phys(x->spba_dma); ++ x->devs[0].ptr_high = 0; ++ grub_arch_sync_dma_caches(x->devs_dma, sizeof(x->devs[0])); ++ grub_dprintf ("xhci", "XHCI init: Allocated %d scratch buffers of size 0x%x\n", ++ x->spb, x->pagesize); ++ } ++ ++ grub_xhci_reset(x); ++ ++ /* Set the running bit */ ++ reg = grub_xhci_read32 (&x->op->usbcmd); ++ reg |= GRUB_XHCI_CMD_RS; ++ grub_xhci_write32 (&x->op->usbcmd, reg); ++ ++ ++ /* Link to xhci now that initialisation is successful. */ ++ x->next = xhci; ++ xhci = x; ++ ++ return; ++ ++fail: ++ grub_dprintf ("xhci", "XHCI grub_xhci_pci_iter: FAILED!\n"); ++ if (x) ++ { ++ if (x->devs_dma) ++ grub_dma_free (x->devs_dma); ++ if (x->eseg_dma) ++ grub_dma_free (x->eseg_dma); ++ if (x->cmds_dma) ++ grub_dma_free (x->cmds_dma); ++ if (x->evts_dma) ++ grub_dma_free (x->evts_dma); ++ if (x->spad_dma) ++ grub_dma_free (x->spad_dma); ++ if (x->spba_dma) ++ grub_dma_free (x->spba_dma); ++ } ++ grub_free (x); ++ ++ return; ++} ++ ++static int ++grub_xhci_iterate (grub_usb_controller_iterate_hook_t hook, void *hook_data) ++{ ++ struct grub_xhci *x; ++ struct grub_usb_controller dev; ++ ++ for (x = xhci; x; x = x->next) ++ { ++ dev.data = x; ++ if (hook (&dev, hook_data)) ++ return 1; ++ } ++ ++ return 0; ++} ++ ++/**************************************************************** ++ * xHCI maintainance functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_update_hub_portcount (struct grub_xhci *x, ++ grub_usb_transfer_t transfer, ++ grub_uint32_t slotid) ++{ ++ struct grub_pci_dma_chunk *in_dma; ++ volatile struct grub_xhci_slotctx *hdslot; ++ grub_uint32_t epid = 0; ++ ++ if (!transfer || !transfer->dev || !transfer->dev->nports) ++ return GRUB_USB_ERR_NONE; ++ ++ hdslot = grub_dma_phys2virt(x->devs[slotid].ptr_low, x->devs_dma); ++ if ((hdslot->ctx[3] >> 27) == 3) ++ /* Already configured */ ++ return 0; ++ ++ grub_dprintf("xhci", "%s: updating hub config to %d ports\n", __func__, ++ transfer->dev->nports); ++ ++ xhci_check_status(x); ++ ++ /* Allocate input context and initialize endpoint info. */ ++ in_dma = grub_xhci_alloc_inctx(x, epid, transfer->dev); ++ if (!in_dma) ++ return GRUB_USB_ERR_INTERNAL; ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(in_dma); ++ ++ in->add = (1 << epid); ++ ++ struct grub_xhci_epctx *ep = (void*)&in[(epid+1) << x->flag64]; ++ ep->ctx[0] |= 1 << 26; ++ ep->ctx[1] |= transfer->dev->nports << 24; ++ ++ int cc = xhci_cmd_configure_endpoint(x, slotid, in_dma); ++ grub_dma_free(in_dma); ++ ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci", "%s: reconf ctl endpoint: failed (cc %d)\n", ++ __func__, cc); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static grub_usb_err_t ++grub_xhci_update_max_paket_size (struct grub_xhci *x, ++ grub_usb_transfer_t transfer, ++ grub_uint32_t slotid, ++ grub_uint32_t max_packet) ++{ ++ struct grub_pci_dma_chunk *in_dma; ++ grub_uint32_t epid = 1; ++ ++ if (!transfer || !transfer->dev || !max_packet) ++ return GRUB_USB_ERR_NONE; ++ ++ grub_dprintf("xhci", "%s: updating max packet size to 0x%x\n", __func__, ++ max_packet); ++ ++ xhci_check_status(x); ++ ++ /* Allocate input context and initialize endpoint info. */ ++ in_dma = grub_xhci_alloc_inctx(x, epid, transfer->dev); ++ if (!in_dma) ++ return GRUB_USB_ERR_INTERNAL; ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(in_dma); ++ in->add = (1 << epid); ++ ++ struct grub_xhci_epctx *ep = (void*)&in[(epid+1) << x->flag64]; ++ ep->ctx[1] |= max_packet << 16; ++ ++ int cc = xhci_cmd_evaluate_context(x, slotid, in_dma); ++ grub_dma_free(in_dma); ++ ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci", "%s: reconf ctl endpoint: failed (cc %d)\n", ++ __func__, cc); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI endpoint enablement functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_prepare_endpoint (struct grub_xhci *x, ++ struct grub_usb_device *dev, ++ grub_uint8_t endpoint, ++ grub_transfer_type_t dir, ++ grub_transaction_type_t type, ++ grub_uint32_t maxpaket, ++ struct grub_xhci_priv *priv) ++{ ++ grub_uint32_t epid; ++ struct grub_pci_dma_chunk *reqs_dma; ++ struct grub_pci_dma_chunk *in_dma; ++ volatile struct grub_xhci_ring *reqs; ++ volatile struct grub_xhci_slotctx *slotctx; ++ ++ if (!x || !priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ xhci_check_status(x); ++ ++ if (endpoint == 0) ++ { ++ epid = 1; ++ } ++ else ++ { ++ epid = (endpoint & 0x0f) * 2; ++ epid += (dir == GRUB_USB_TRANSFER_TYPE_IN) ? 1 : 0; ++ } ++ grub_dprintf("xhci", "%s: epid %d\n", __func__, epid); ++ ++ /* Test if already prepared */ ++ if (priv->slotid > 0 && priv->enpoint_trbs[epid] != NULL) ++ return GRUB_USB_ERR_NONE; ++ ++ /* Allocate DMA buffer as endpoint cmd TRB */ ++ reqs_dma = xhci_memalign_dma32(ALIGN_TRB, sizeof(*reqs), ++ BOUNDARY_RING); ++ if (!reqs_dma) ++ return GRUB_USB_ERR_INTERNAL; ++ reqs = grub_dma_get_virt(reqs_dma); ++ grub_memset((void *)reqs, 0, sizeof(*reqs)); ++ reqs->cs = 1; ++ ++ grub_arch_sync_dma_caches(reqs, sizeof(*reqs)); ++ ++ /* Allocate input context and initialize endpoint info. */ ++ in_dma = grub_xhci_alloc_inctx(x, epid, dev); ++ if (!in_dma) ++ { ++ grub_dma_free(reqs_dma); ++ return GRUB_USB_ERR_INTERNAL; ++ } ++ volatile struct grub_xhci_inctx *in = grub_dma_get_virt(in_dma); ++ in->add = 0x01 | (1 << epid); ++ ++ struct grub_xhci_epctx *ep = (void*)&in[(epid+1) << x->flag64]; ++ switch (type) ++ { ++ case GRUB_USB_TRANSACTION_TYPE_CONTROL: ++ ep->ctx[1] |= 0 << 3; ++ break; ++ case GRUB_USB_TRANSACTION_TYPE_BULK: ++ ep->ctx[1] |= 2 << 3; ++ break; ++ } ++ if (dir == GRUB_USB_TRANSFER_TYPE_IN ++ || type== GRUB_USB_TRANSACTION_TYPE_CONTROL) ++ ep->ctx[1] |= 1 << 5; ++ ep->ctx[1] |= maxpaket << 16; ++ ep->deq_low = grub_dma_get_phys(reqs_dma); ++ ep->deq_low |= 1; /* dcs */ ++ ep->length = maxpaket; ++ ++ grub_dprintf("xhci", "%s: ring %p, epid %d, max %d\n", __func__, ++ reqs, epid, maxpaket); ++ if (epid == 1 || priv->slotid == 0) { ++ /* Enable slot. */ ++ int slotid = xhci_cmd_enable_slot(x); ++ if (slotid < 0) ++ { ++ grub_dprintf("xhci", "%s: enable slot: failed\n", __func__); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ grub_dprintf("xhci", "%s: get slot %d assigned\n", __func__, slotid); ++ ++ grub_uint32_t size = (sizeof(struct grub_xhci_slotctx) * GRUB_XHCI_MAX_ENDPOINTS) << x->flag64; ++ ++ /* Allocate memory for the device specific slot context */ ++ priv->slotctx_dma = xhci_memalign_dma32(ALIGN_SLOTCTX, size, ++ x->pagesize); ++ if (!priv->slotctx_dma) ++ { ++ grub_dprintf("xhci", "%s: grub_memalign_dma32 failed\n", __func__); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_INTERNAL; ++ } ++ slotctx = grub_dma_get_virt(priv->slotctx_dma); ++ ++ grub_dprintf("xhci", "%s: enable slot: got slotid %d\n", __func__, slotid); ++ grub_memset((void *)slotctx, 0, size); ++ grub_arch_sync_dma_caches(slotctx, size); ++ ++ x->devs[slotid].ptr_low = grub_dma_get_phys(priv->slotctx_dma); ++ x->devs[slotid].ptr_high = 0; ++ grub_arch_sync_dma_caches(&x->devs[slotid], sizeof(x->devs[0])); ++ ++ /* Send set_address command. */ ++ int cc = xhci_cmd_address_device(x, slotid, in_dma); ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci","%s: address device: failed (cc %d)\n", __func__, cc); ++ cc = xhci_cmd_disable_slot(x, slotid); ++ if (cc != CC_SUCCESS) { ++ grub_dprintf("xhci", "%s: disable failed (cc %d)\n", __func__, cc); ++ } else { ++ x->devs[slotid].ptr_low = 0; ++ x->devs[slotid].ptr_high = 0; ++ grub_arch_sync_dma_caches(&x->devs[slotid], sizeof(x->devs[0])); ++ } ++ grub_dma_free(priv->slotctx_dma); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ priv->enpoint_trbs[epid] = reqs; ++ priv->enpoint_trbs_dma[epid] = reqs_dma; ++ priv->slotid = slotid; ++ priv->max_packet = 0; ++ } ++ if (epid != 1) ++ { ++ /* Send configure command. */ ++ int cc = xhci_cmd_configure_endpoint(x, priv->slotid, in_dma); ++ if (cc != CC_SUCCESS) ++ { ++ grub_dprintf("xhci", "%s: configure endpoint: failed (cc %d)\n", ++ __func__, cc); ++ grub_dma_free(reqs_dma); ++ grub_dma_free(in_dma); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ priv->enpoint_trbs[epid] = reqs; ++ priv->enpoint_trbs_dma[epid] = reqs_dma; ++ } ++ ++ grub_dprintf("xhci", "%s: done\n", __func__); ++ grub_dma_free(in_dma); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++ ++/**************************************************************** ++ * xHCI transfer helper functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_usb_to_grub_err (unsigned char status) ++{ ++ if (status != CC_SUCCESS) ++ grub_dprintf("xhci", "%s: xfer failed (cc %d)\n", __func__, status); ++ else ++ grub_dprintf("xhci", "%s: xfer done (cc %d)\n", __func__, status); ++ ++ if (status == CC_BABBLE_DETECTED) ++ return GRUB_USB_ERR_BABBLE; ++ else if (status == CC_DATA_BUFFER_ERROR) ++ return GRUB_USB_ERR_DATA; ++ else if (status == CC_STALL_ERROR) ++ return GRUB_USB_ERR_STALL; ++ else if (status != CC_SUCCESS) ++ return GRUB_USB_ERR_NAK; ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static int ++grub_xhci_transfer_is_zlp(grub_usb_transfer_t transfer, int idx) ++{ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ grub_usb_transaction_t tr = &transfer->transactions[idx]; ++ ++ return (tr->size == 0) && ++ ((tr->pid == GRUB_USB_TRANSFER_TYPE_OUT) || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_IN)); ++} ++ ++static int ++grub_xhci_transfer_is_last(grub_usb_transfer_t transfer, int idx) ++{ ++ return (idx + 1) == transfer->transcnt; ++} ++ ++static int ++grub_xhci_transfer_is_data(grub_usb_transfer_t transfer, int idx) ++{ ++ grub_usb_transaction_t tr; ++ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ tr = &transfer->transactions[idx]; ++ if (tr->size == 0 || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_SETUP)) ++ return 0; ++ ++ /* If there's are no DATA pakets before it's a DATA paket */ ++ for (int i = idx - 1; i >= 0; i--) ++ { ++ tr = &transfer->transactions[i]; ++ if (tr->size > 0 && ++ ((tr->pid == GRUB_USB_TRANSFER_TYPE_OUT) || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_IN))) ++ return 0; ++ } ++ return 1; ++} ++ ++static int ++grub_xhci_transfer_is_in(grub_usb_transfer_t transfer, int idx) ++{ ++ grub_usb_transaction_t tr; ++ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ tr = &transfer->transactions[idx]; ++ ++ return tr->pid == GRUB_USB_TRANSFER_TYPE_IN; ++} ++ ++static int ++grub_xhci_transfer_is_normal(grub_usb_transfer_t transfer, int idx) ++{ ++ grub_usb_transaction_t tr; ++ ++ if (idx >= transfer->transcnt) ++ return 0; ++ ++ tr = &transfer->transactions[idx]; ++ if (tr->size == 0 || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_SETUP)) ++ return 0; ++ ++ /* If there's at least one DATA paket before it's a normal */ ++ for (int i = idx - 1; i >= 0; i--) ++ { ++ tr = &transfer->transactions[i]; ++ if (tr->size > 0 && ++ ((tr->pid == GRUB_USB_TRANSFER_TYPE_OUT) || ++ (tr->pid == GRUB_USB_TRANSFER_TYPE_IN))) ++ return 1; ++ ++ } ++ return 0; ++} ++ ++static int ++grub_xhci_transfer_next_is_normal(grub_usb_transfer_t transfer, int idx) ++{ ++ return grub_xhci_transfer_is_normal(transfer, idx + 1); ++} ++ ++static int ++grub_xhci_transfer_next_is_in(grub_usb_transfer_t transfer, int idx) ++{ ++ return grub_xhci_transfer_is_in(transfer, idx + 1); ++} ++ ++static grub_uint8_t grub_xhci_epid_from_transfer(grub_usb_transfer_t transfer) ++{ ++ grub_uint8_t epid; ++ ++ if (transfer->endpoint == 0) { ++ epid = 1; ++ } else { ++ epid = (transfer->endpoint & 0x0f) * 2; ++ epid += (transfer->dir == GRUB_USB_TRANSFER_TYPE_IN) ? 1 : 0; ++ } ++ return epid; ++} ++ ++/**************************************************************** ++ * xHCI transfer functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_setup_transfer (grub_usb_controller_t dev, ++ grub_usb_transfer_t transfer) ++{ ++ struct grub_xhci_transfer_controller_data *cdata; ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint8_t epid; ++ grub_usb_err_t err; ++ volatile struct grub_xhci_ring *reqs; ++ int rc; ++ struct grub_xhci_priv *priv; ++ ++ xhci_check_status(x); ++ ++ if (!dev || !transfer || !transfer->dev || !transfer->dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ priv = transfer->dev->xhci_priv; ++ err = grub_xhci_prepare_endpoint(x, transfer->dev, ++ transfer->endpoint, ++ transfer->dir, ++ transfer->type, ++ transfer->max, ++ priv); ++ ++ if (err != GRUB_USB_ERR_NONE) ++ return err; ++ ++ epid = grub_xhci_epid_from_transfer(transfer); ++ ++ /* Update the max packet size once descdev.maxsize0 is valid */ ++ if (epid == 1 && ++ (priv->max_packet == 0) && ++ (transfer->dev->descdev.maxsize0 > 0)) ++ { ++ if (transfer->dev->speed == GRUB_USB_SPEED_SUPER) ++ priv->max_packet = 1UL << transfer->dev->descdev.maxsize0; ++ else ++ priv->max_packet = transfer->dev->descdev.maxsize0; ++ err = grub_xhci_update_max_paket_size(x, transfer, priv->slotid, priv->max_packet); ++ if (err != GRUB_USB_ERR_NONE) ++ { ++ grub_dprintf("xhci", "%s: Updating max paket size failed\n", __func__); ++ return err; ++ } ++ } ++ if (epid == 1 && ++ transfer->dev->descdev.class == 9 && ++ transfer->dev->nports > 0) ++ { ++ err = grub_xhci_update_hub_portcount(x, transfer, priv->slotid); ++ if (err != GRUB_USB_ERR_NONE) ++ { ++ grub_dprintf("xhci", "%s: Updating max paket size failed\n", __func__); ++ return err; ++ } ++ } ++ ++ /* Allocate private data for the transfer */ ++ cdata = grub_zalloc(sizeof(*cdata)); ++ if (!cdata) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ reqs = priv->enpoint_trbs[epid]; ++ ++ transfer->controller_data = cdata; ++ ++ /* Now queue the transfer onto the TRB */ ++ if (transfer->type == GRUB_USB_TRANSACTION_TYPE_CONTROL) ++ { ++ volatile struct grub_usb_packet_setup *setupdata; ++ setupdata = (void *)transfer->transactions[0].data; ++ grub_dprintf("xhci", "%s: CONTROLL TRANS req %d\n", __func__, setupdata->request); ++ grub_dprintf("xhci", "%s: CONTROLL TRANS length %d\n", __func__, setupdata->length); ++ ++ if (setupdata && setupdata->request == GRUB_USB_REQ_SET_ADDRESS) ++ return GRUB_USB_ERR_NONE; ++ ++ if (transfer->transcnt < 2) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ for (int i = 0; i < transfer->transcnt; i++) ++ { ++ grub_uint32_t flags = 0; ++ grub_uint64_t inline_data; ++ grub_usb_transaction_t tr = &transfer->transactions[i]; ++ ++ switch (tr->pid) ++ { ++ case GRUB_USB_TRANSFER_TYPE_SETUP: ++ { ++ grub_dprintf("xhci", "%s: SETUP PKG\n", __func__); ++ grub_dprintf("xhci", "%s: transfer->size %d\n", __func__, transfer->size); ++ grub_dprintf("xhci", "%s: tr->size %d SETUP PKG\n", __func__, tr->size); ++ ++ flags |= (TR_SETUP << 10); ++ flags |= TRB_TR_IDT; ++ ++ if (transfer->size > 0) ++ { ++ if (grub_xhci_transfer_next_is_in(transfer, i)) ++ flags |= (3 << 16); /* TRT IN */ ++ else ++ flags |= (2 << 16); /* TRT OUT */ ++ } ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_OUT: ++ { ++ grub_dprintf("xhci", "%s: OUT PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_IN: ++ { ++ grub_dprintf("xhci", "%s: IN PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ flags |= TRB_TR_DIR; ++ break; ++ } ++ } ++ ++ if (grub_xhci_transfer_is_normal(transfer, i)) ++ flags |= (TR_NORMAL << 10); ++ else if (grub_xhci_transfer_is_data(transfer, i)) ++ flags |= (TR_DATA << 10); ++ else if (grub_xhci_transfer_is_zlp(transfer, i)) ++ flags |= (TR_STATUS << 10); ++ ++ if (grub_xhci_transfer_next_is_normal(transfer, i)) ++ flags |= TRB_TR_CH; ++ ++ if (grub_xhci_transfer_is_last(transfer, i)) ++ flags |= TRB_TR_IOC; ++ ++ /* Assume the ring has enough free space for all TRBs */ ++ if (flags & TRB_TR_IDT && tr->size <= (int)sizeof(inline_data)) ++ { ++ grub_memcpy(&inline_data, (void *)tr->data, tr->size); ++ xhci_trb_queue(reqs, inline_data, tr->size, flags); ++ } ++ else ++ { ++ xhci_trb_queue(reqs, tr->data, tr->size, flags); ++ } ++ } ++ } ++ else if (transfer->type == GRUB_USB_TRANSACTION_TYPE_BULK) ++ { ++ for (int i = 0; i < transfer->transcnt; i++) ++ { ++ grub_uint32_t flags = (TR_NORMAL << 10); ++ grub_usb_transaction_t tr = &transfer->transactions[i]; ++ switch (tr->pid) ++ { ++ case GRUB_USB_TRANSFER_TYPE_OUT: ++ { ++ grub_dprintf("xhci", "%s: OUT PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_IN: ++ { ++ grub_dprintf("xhci", "%s: IN PKG\n", __func__); ++ cdata->transfer_size += tr->size; ++ flags |= TRB_TR_DIR; ++ break; ++ } ++ case GRUB_USB_TRANSFER_TYPE_SETUP: ++ break; ++ } ++ if (grub_xhci_transfer_is_last(transfer, i)) ++ flags |= TRB_TR_IOC; ++ ++ /* The ring might be to small, submit while adding new entries */ ++ rc = xhci_trb_queue_and_flush(x, priv->slotid, epid, ++ reqs, tr->data, tr->size, flags); ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ else if (rc > 1) ++ return grub_xhci_usb_to_grub_err(rc); ++ ++ } ++ } ++ xhci_doorbell(x, priv->slotid, epid); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++static grub_usb_err_t ++grub_xhci_check_transfer (grub_usb_controller_t dev, ++ grub_usb_transfer_t transfer, grub_size_t * actual) ++{ ++ grub_uint32_t status; ++ grub_uint32_t remaining; ++ grub_uint8_t epid; ++ volatile struct grub_xhci_ring *reqs; ++ grub_usb_err_t err; ++ int rc; ++ ++ if (!dev->data || !transfer->controller_data || !transfer->dev || ++ !transfer->dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ ++ struct grub_xhci_priv *priv = transfer->dev->xhci_priv; ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ struct grub_xhci_transfer_controller_data *cdata = ++ transfer->controller_data; ++ ++ xhci_check_status(x); ++ xhci_process_events(x); ++ ++ epid = grub_xhci_epid_from_transfer(transfer); ++ ++ reqs = priv->enpoint_trbs[epid]; ++ ++ /* XXX: invalidate caches */ ++ ++ /* Get current status from event ring buffer */ ++ status = (reqs->evt.status>> 24) & 0xff; ++ remaining = reqs->evt.status & 0xffffff; ++ ++ if (status != CC_STOPPED_LENGTH_INVALID) ++ *actual = cdata->transfer_size - remaining; ++ else ++ *actual = 0; ++ ++ if (xhci_ring_busy(reqs)) ++ return GRUB_USB_ERR_WAIT; ++ ++ grub_free(cdata); ++ ++ grub_dprintf("xhci", "%s: xfer done\n", __func__); ++ ++ err = grub_xhci_usb_to_grub_err(status); ++ if (err != GRUB_USB_ERR_NONE) ++ { ++ if (status == CC_STALL_ERROR) ++ { ++ /* Clear the stall by resetting the endpoint */ ++ rc = xhci_cmd_reset_endpoint(x, priv->slotid, epid, 1); ++ ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ return GRUB_USB_ERR_STALL; ++ } ++ else if (remaining > 0) ++ { ++ return GRUB_USB_ERR_DATA; ++ } ++ } ++ ++ return err; ++} ++ ++static grub_usb_err_t ++grub_xhci_cancel_transfer (grub_usb_controller_t dev, ++ grub_usb_transfer_t transfer) ++{ ++ grub_uint8_t epid; ++ volatile struct grub_xhci_ring *reqs; ++ struct grub_pci_dma_chunk *enpoint_trbs_dma; ++ grub_addr_t deque_pointer; ++ int rc; ++ ++ if (!dev->data || !transfer->controller_data || !transfer->dev || ++ !transfer->dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ struct grub_xhci_transfer_controller_data *cdata = ++ transfer->controller_data; ++ struct grub_xhci_priv *priv = transfer->dev->xhci_priv; ++ ++ epid = grub_xhci_epid_from_transfer(transfer); ++ ++ enpoint_trbs_dma = priv->enpoint_trbs_dma[epid]; ++ reqs = priv->enpoint_trbs[epid]; ++ ++ /* Abort current command */ ++ rc = xhci_cmd_stop_endpoint(x, priv->slotid, epid, 0); ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ /* Reset state */ ++ reqs->nidx = 0; ++ reqs->eidx = 0; ++ reqs->cs = 1; ++ ++ grub_arch_sync_dma_caches(reqs, sizeof(*reqs)); ++ ++ /* Reset the dequeue pointer to the begging of the TRB */ ++ deque_pointer = grub_dma_get_phys(enpoint_trbs_dma); ++ rc = xhci_cmd_set_dequeue_pointer(x, priv->slotid, epid, deque_pointer| 1 ); ++ if (rc < 0) ++ return GRUB_USB_ERR_TIMEOUT; ++ ++ reqs->evt.ptr_low = 0; ++ reqs->evt.ptr_high = 0; ++ reqs->evt.control = 0; ++ reqs->evt.status = 0; ++ ++ grub_arch_sync_dma_caches(reqs, sizeof(*reqs)); ++ ++ /* Restart ring buffer processing */ ++ xhci_doorbell(x, priv->slotid, epid); ++ ++ grub_free (cdata); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI port status functions ++ ****************************************************************/ ++ ++static int ++grub_xhci_hubports (grub_usb_controller_t dev) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint32_t portinfo; ++ ++ portinfo = x->ports; ++ grub_dprintf ("xhci", "root hub ports=%d\n", portinfo); ++ return portinfo; ++} ++ ++static grub_usb_err_t ++grub_xhci_portstatus (grub_usb_controller_t dev, ++ unsigned int port, unsigned int enable) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint32_t portsc, pls; ++ grub_uint32_t end; ++ ++ portsc = grub_xhci_port_read(x, port); ++ pls = xhci_get_field(portsc, XHCI_PORTSC_PLS); ++ ++ grub_dprintf("xhci", "grub_xhci_portstatus port #%d: 0x%08x,%s%s pls %d enable %d\n", ++ port, portsc, ++ (portsc & GRUB_XHCI_PORTSC_PP) ? " powered," : "", ++ (portsc & GRUB_XHCI_PORTSC_PED) ? " enabled," : "", ++ pls, enable); ++ xhci_check_status(x); ++ ++ if ((enable && (portsc & GRUB_XHCI_PORTSC_PED)) || ++ (!enable && !(portsc & GRUB_XHCI_PORTSC_PED))) ++ return GRUB_USB_ERR_NONE; ++ ++ if (!enable) ++ { ++ /* Disable port */ ++ grub_xhci_port_write(x, port, ~0, GRUB_XHCI_PORTSC_PED); ++ return GRUB_USB_ERR_NONE; ++ } ++ ++ grub_dprintf ("xhci", "portstatus: XHCI STATUS: %08x\n", ++ grub_xhci_read32(&x->op->usbsts)); ++ grub_dprintf ("xhci", ++ "portstatus: begin, iobase=%p, port=%d, status=0x%08x\n", ++ x->caps, port, portsc); ++ ++ switch (pls) ++ { ++ case PLS_U0: ++ /* A USB3 port - controller automatically performs reset */ ++ break; ++ case PLS_POLLING: ++ /* A USB2 port - perform device reset */ ++ grub_xhci_port_write(x, port, ~GRUB_XHCI_PORTSC_PED, GRUB_XHCI_PORTSC_PR); ++ break; ++ default: ++ return GRUB_USB_ERR_NONE; ++ } ++ ++ /* Wait for device to complete reset and be enabled */ ++ end = grub_get_time_ms () + 100; ++ for (;;) ++ { ++ portsc = grub_xhci_port_read(x, port); ++ if (!(portsc & GRUB_XHCI_PORTSC_CCS)) ++ { ++ /* Device disconnected during reset */ ++ grub_dprintf ("xhci","ERROR: %s device disconnected\n", __func__); ++ return GRUB_USB_ERR_BADDEVICE; ++ } ++ if (portsc & GRUB_XHCI_PORTSC_PED) ++ /* Reset complete */ ++ break; ++ if (grub_get_time_ms () > end) ++ { ++ grub_dprintf ("xhci","ERROR: %s TIMEOUT\n", __func__); ++ return GRUB_USB_ERR_TIMEOUT; ++ } ++ } ++ xhci_check_status(x); ++ ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI detect device functions ++ ****************************************************************/ ++ ++static grub_usb_speed_t ++grub_xhci_detect_dev (grub_usb_controller_t dev, int port, int *changed) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) dev->data; ++ grub_uint32_t portsc, speed; ++ ++ *changed = 0; ++ grub_dprintf("xhci", "%s: dev=%p USB%d_%d port %d\n", __func__, dev, ++ x->psids[port-1].major, x->psids[port-1].minor, port); ++ ++ /* On shutdown advertise all ports as disconnected. This will trigger ++ * a gracefull detatch. */ ++ if (x->shutdown) ++ { ++ *changed = 1; ++ return GRUB_USB_SPEED_NONE; ++ } ++ ++ /* Don't advertise new devices, connecting will fail if halted */ ++ if (xhci_is_halted(x)) ++ return GRUB_USB_SPEED_NONE; ++ ++ portsc = grub_xhci_port_read(x, port); ++ speed = xhci_get_field(portsc, XHCI_PORTSC_SPEED); ++ grub_uint8_t pls = xhci_get_field(portsc, XHCI_PORTSC_PLS); ++ ++ grub_dprintf("xhci", "grub_xhci_portstatus port #%d: 0x%08x,%s%s pls %d\n", ++ port, portsc, ++ (portsc & GRUB_XHCI_PORTSC_PP) ? " powered," : "", ++ (portsc & GRUB_XHCI_PORTSC_PED) ? " enabled," : "", ++ pls); ++ ++ /* Connect Status Change bit - it detects change of connection */ ++ if (portsc & GRUB_XHCI_PORTSC_CSC) ++ { ++ *changed = 1; ++ ++ grub_xhci_port_write(x, port, ~GRUB_XHCI_PORTSC_PED, GRUB_XHCI_PORTSC_CSC); ++ } ++ ++ if (!(portsc & GRUB_XHCI_PORTSC_CCS)) ++ return GRUB_USB_SPEED_NONE; ++ ++ for (grub_uint8_t i = 0; i < 16 && x->psids[port-1].psids[i].id > 0; i++) ++ { ++ if (x->psids[port-1].psids[i].id == speed) ++ { ++ grub_dprintf("xhci", "%s: grub_usb_speed = %d\n", __func__, ++ x->psids[port-1].psids[i].grub_usb_speed ); ++ return x->psids[port-1].psids[i].grub_usb_speed; ++ } ++ } ++ ++ return GRUB_USB_SPEED_NONE; ++} ++ ++/**************************************************************** ++ * xHCI attach/detach functions ++ ****************************************************************/ ++ ++static grub_usb_err_t ++grub_xhci_attach_dev (grub_usb_controller_t ctrl, grub_usb_device_t dev) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) ctrl->data; ++ grub_usb_err_t err; ++ grub_uint32_t max; ++ ++ grub_dprintf("xhci", "%s: dev=%p\n", __func__, dev); ++ ++ if (!dev || !x) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ dev->xhci_priv = grub_zalloc (sizeof (struct grub_xhci_priv)); ++ if (!dev->xhci_priv) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ ++ switch (dev->speed) ++ { ++ case GRUB_USB_SPEED_LOW: ++ { ++ max = 8; ++ break; ++ } ++ case GRUB_USB_SPEED_FULL: ++ case GRUB_USB_SPEED_HIGH: ++ { ++ max = 64; ++ break; ++ } ++ case GRUB_USB_SPEED_SUPER: ++ { ++ max = 512; ++ break; ++ } ++ default: ++ case GRUB_USB_SPEED_NONE: ++ { ++ max = 0; ++ } ++ } ++ ++ /* Assign a slot, assign an address and configure endpoint 0 */ ++ err = grub_xhci_prepare_endpoint(x, dev, ++ 0, ++ 0, ++ GRUB_USB_TRANSACTION_TYPE_CONTROL, ++ max, ++ dev->xhci_priv); ++ ++ return err; ++} ++ ++static grub_usb_err_t ++grub_xhci_detach_dev (grub_usb_controller_t ctrl, grub_usb_device_t dev) ++{ ++ struct grub_xhci *x = (struct grub_xhci *) ctrl->data; ++ struct grub_xhci_priv *priv; ++ int cc = CC_SUCCESS; ++ ++ grub_dprintf("xhci", "%s: dev=%p\n", __func__, dev); ++ ++ if (!dev) ++ return GRUB_USB_ERR_INTERNAL; ++ ++ if (dev->xhci_priv) ++ { ++ priv = dev->xhci_priv; ++ /* Stop endpoints and free ring buffer */ ++ for (int i = 0; i < GRUB_XHCI_MAX_ENDPOINTS; i++) ++ { ++ if (priv->enpoint_trbs[i] != NULL) ++ { ++ cc = xhci_cmd_stop_endpoint(x, priv->slotid, i, 1); ++ if (cc != CC_SUCCESS) ++ grub_dprintf("xhci", "Failed to disable EP%d on slot %d\n", i, ++ priv->slotid); ++ ++ grub_dprintf("xhci", "grub_dma_free[%d]\n", i); ++ ++ grub_dma_free(priv->enpoint_trbs_dma[i]); ++ priv->enpoint_trbs[i] = NULL; ++ priv->enpoint_trbs_dma[i] = NULL; ++ } ++ } ++ ++ cc = xhci_cmd_disable_slot(x, priv->slotid); ++ if (cc == CC_SUCCESS) ++ { ++ if (priv->slotctx_dma) ++ grub_dma_free(priv->slotctx_dma); ++ x->devs[priv->slotid].ptr_low = 0; ++ x->devs[priv->slotid].ptr_high = 0; ++ grub_arch_sync_dma_caches(&x->devs[priv->slotid], sizeof(x->devs[0])); ++ } ++ else ++ grub_dprintf("xhci", "Failed to disable slot %d\n", priv->slotid); ++ ++ grub_free(dev->xhci_priv); ++ } ++ ++ dev->xhci_priv = NULL; ++ ++ if (cc != CC_SUCCESS) ++ return GRUB_USB_ERR_BADDEVICE; ++ return GRUB_USB_ERR_NONE; ++} ++ ++/**************************************************************** ++ * xHCI terminate functions ++ ****************************************************************/ ++ ++static void ++grub_xhci_halt(struct grub_xhci *x) ++{ ++ grub_uint32_t reg; ++ ++ /* Halt the command ring */ ++ reg = grub_xhci_read32(&x->op->crcr_low); ++ grub_xhci_write32(&x->op->crcr_low, reg | 4); ++ ++ int rc = xhci_event_wait(x, x->cmds, 100); ++ grub_dprintf("xhci", "%s: xhci_event_wait = %d\n", __func__, rc); ++ if (rc < 0) ++ return; ++ ++ /* Stop the controller */ ++ reg = grub_xhci_read32(&x->op->usbcmd); ++ if (reg & GRUB_XHCI_CMD_RS) ++ { ++ reg &= ~GRUB_XHCI_CMD_RS; ++ grub_xhci_write32(&x->op->usbcmd, reg); ++ } ++ ++ return; ++} ++ ++static grub_err_t ++grub_xhci_fini_hw (int noreturn __attribute__ ((unused))) ++{ ++ struct grub_xhci *x; ++ ++ /* We should disable all XHCI HW to prevent any DMA access etc. */ ++ for (x = xhci; x; x = x->next) ++ { ++ x->shutdown = 1; ++ ++ /* Gracefully detach active devices */ ++ grub_usb_poll_devices(0); ++ ++ /* Check if xHCI is halted and halt it if not */ ++ grub_xhci_halt (x); ++ ++ /* Reset xHCI */ ++ if (grub_xhci_reset (x) != GRUB_USB_ERR_NONE) ++ return GRUB_ERR_BAD_DEVICE; ++ } ++ ++ return GRUB_ERR_NONE; ++} ++ ++static struct grub_usb_controller_dev usb_controller = { ++ .name = "xhci", ++ .iterate = grub_xhci_iterate, ++ .setup_transfer = grub_xhci_setup_transfer, ++ .check_transfer = grub_xhci_check_transfer, ++ .cancel_transfer = grub_xhci_cancel_transfer, ++ .hubports = grub_xhci_hubports, ++ .portstatus = grub_xhci_portstatus, ++ .detect_dev = grub_xhci_detect_dev, ++ .attach_dev = grub_xhci_attach_dev, ++ .detach_dev = grub_xhci_detach_dev, ++ /* estimated max. count of TDs for one bulk transfer */ ++ .max_bulk_tds = GRUB_XHCI_RING_ITEMS - 3 ++}; ++ ++GRUB_MOD_INIT (xhci) ++{ ++ grub_stop_disk_firmware (); ++ ++ grub_boot_time ("Initing XHCI hardware"); ++ grub_xhci_pci_scan (); ++ grub_boot_time ("Registering XHCI driver"); ++ grub_usb_controller_dev_register (&usb_controller); ++ grub_boot_time ("XHCI driver registered"); ++} ++ ++GRUB_MOD_FINI (xhci) ++{ ++ grub_xhci_fini_hw (0); ++ grub_usb_controller_dev_unregister (&usb_controller); ++} +diff --git a/include/grub/usb.h b/include/grub/usb.h +index 609faf7d0..eb71fa1c7 100644 +--- a/include/grub/usb.h ++++ b/include/grub/usb.h +@@ -338,6 +338,10 @@ grub_usb_cancel_transfer (grub_usb_transfer_t trans); + void + grub_ehci_init_device (volatile void *regs); + void ++grub_xhci_init_device (volatile void *regs); ++void + grub_ehci_pci_scan (void); ++void ++grub_xhci_pci_scan (void); + + #endif /* GRUB_USB_H */ +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0007-grub-core-bus-usb-usbhub-Add-xHCI-non-root-hub-suppo.patch b/config/grub/xhci/patches/0005-xhci/0007-grub-core-bus-usb-usbhub-Add-xHCI-non-root-hub-suppo.patch new file mode 100644 index 00000000..a37bbd6b --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0007-grub-core-bus-usb-usbhub-Add-xHCI-non-root-hub-suppo.patch @@ -0,0 +1,127 @@ +From 2a2c64f6ea62337c1263a70f6ca9a9bade66b78b Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Thu, 3 Dec 2020 13:44:55 +0100 +Subject: [PATCH 7/8] grub-core/bus/usb/usbhub: Add xHCI non root hub support + +Tested on Intel PCH C246, the USB3 hub can be configured by grub. + +Issues: +* USB3 devices connected behind that hub are sometimes not detected. + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/usbhub.c | 38 +++++++++++++++++++++++++++++++++----- + include/grub/usbdesc.h | 1 + + include/grub/usbtrans.h | 4 ++++ + 3 files changed, 38 insertions(+), 5 deletions(-) + +diff --git a/grub-core/bus/usb/usbhub.c b/grub-core/bus/usb/usbhub.c +index b4b3a1a61..e96505aa9 100644 +--- a/grub-core/bus/usb/usbhub.c ++++ b/grub-core/bus/usb/usbhub.c +@@ -148,19 +148,32 @@ grub_usb_hub_add_dev (grub_usb_controller_t controller, + return dev; + } + +- ++static grub_usb_err_t ++grub_usb_set_hub_depth(grub_usb_device_t dev, grub_uint8_t depth) ++{ ++ return grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_OUT ++ | GRUB_USB_REQTYPE_CLASS ++ | GRUB_USB_REQTYPE_TARGET_DEV), ++ GRUB_USB_HUB_REQ_SET_HUB_DEPTH, depth, ++ 0, 0, NULL); ++} ++ + static grub_usb_err_t + grub_usb_add_hub (grub_usb_device_t dev) + { + struct grub_usb_usb_hubdesc hubdesc; + grub_usb_err_t err; ++ grub_uint16_t req; + int i; + ++ req = (dev->speed == GRUB_USB_SPEED_SUPER) ? GRUB_USB_DESCRIPTOR_SS_HUB : ++ GRUB_USB_DESCRIPTOR_HUB; ++ + err = grub_usb_control_msg (dev, (GRUB_USB_REQTYPE_IN + | GRUB_USB_REQTYPE_CLASS + | GRUB_USB_REQTYPE_TARGET_DEV), +- GRUB_USB_REQ_GET_DESCRIPTOR, +- (GRUB_USB_DESCRIPTOR_HUB << 8) | 0, ++ GRUB_USB_REQ_GET_DESCRIPTOR, ++ (req << 8) | 0, + 0, sizeof (hubdesc), (char *) &hubdesc); + if (err) + return err; +@@ -183,6 +196,19 @@ grub_usb_add_hub (grub_usb_device_t dev) + return GRUB_USB_ERR_INTERNAL; + } + ++ if (dev->speed == GRUB_USB_SPEED_SUPER) ++ { ++ grub_uint8_t depth; ++ grub_uint32_t route; ++ /* Depth maximum value is 5, but root hubs doesn't count */ ++ for (depth = 0, route = dev->route; (route & 0xf) > 0; route >>= 4) ++ depth++; ++ ++ err = grub_usb_set_hub_depth(dev, depth); ++ if (err) ++ return err; ++ } ++ + /* Power on all Hub ports. */ + for (i = 1; i <= hubdesc.portcnt; i++) + { +@@ -637,7 +663,9 @@ poll_nonroot_hub (grub_usb_device_t dev) + int split_hubaddr = 0; + + /* Determine the device speed. */ +- if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED) ++ if (dev->speed == GRUB_USB_SPEED_SUPER) ++ speed = GRUB_USB_SPEED_SUPER; ++ else if (status & GRUB_USB_HUB_STATUS_PORT_LOWSPEED) + speed = GRUB_USB_SPEED_LOW; + else + { +@@ -651,7 +679,7 @@ poll_nonroot_hub (grub_usb_device_t dev) + grub_millisleep (10); + + /* Find correct values for SPLIT hubport and hubaddr */ +- if (speed == GRUB_USB_SPEED_HIGH) ++ if (speed == GRUB_USB_SPEED_HIGH || speed == GRUB_USB_SPEED_SUPER) + { + /* HIGH speed device needs not transaction translation */ + split_hubport = 0; +diff --git a/include/grub/usbdesc.h b/include/grub/usbdesc.h +index bb2ab2e27..1697aa465 100644 +--- a/include/grub/usbdesc.h ++++ b/include/grub/usbdesc.h +@@ -30,6 +30,7 @@ typedef enum { + GRUB_USB_DESCRIPTOR_ENDPOINT, + GRUB_USB_DESCRIPTOR_DEBUG = 10, + GRUB_USB_DESCRIPTOR_HUB = 0x29, ++ GRUB_USB_DESCRIPTOR_SS_HUB = 0x2a, + GRUB_USB_DESCRIPTOR_SS_ENDPOINT_COMPANION = 0x30 + } grub_usb_descriptor_t; + +diff --git a/include/grub/usbtrans.h b/include/grub/usbtrans.h +index 039ebed65..d6c3f71dc 100644 +--- a/include/grub/usbtrans.h ++++ b/include/grub/usbtrans.h +@@ -110,6 +110,10 @@ enum + GRUB_USB_REQ_SET_INTERFACE = 0x0B, + GRUB_USB_REQ_SYNC_FRAME = 0x0C + }; ++enum ++ { ++ GRUB_USB_HUB_REQ_SET_HUB_DEPTH = 0x0C, ++ }; + + #define GRUB_USB_FEATURE_ENDP_HALT 0x00 + #define GRUB_USB_FEATURE_DEV_REMOTE_WU 0x01 +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0005-xhci/0008-Fix-compilation-on-x86_64.patch b/config/grub/xhci/patches/0005-xhci/0008-Fix-compilation-on-x86_64.patch new file mode 100644 index 00000000..af79c3d0 --- /dev/null +++ b/config/grub/xhci/patches/0005-xhci/0008-Fix-compilation-on-x86_64.patch @@ -0,0 +1,90 @@ +From 871d768f8c5c960cb0d9761a9028b16882e1a7d3 Mon Sep 17 00:00:00 2001 +From: Patrick Rudolph <patrick.rudolph@9elements.com> +Date: Wed, 24 Feb 2021 08:25:41 +0100 +Subject: [PATCH 8/8] Fix compilation on x86_64 + +Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> +--- + grub-core/bus/usb/xhci.c | 24 ++++++++++++++++-------- + 1 file changed, 16 insertions(+), 8 deletions(-) + +diff --git a/grub-core/bus/usb/xhci.c b/grub-core/bus/usb/xhci.c +index f4591ffb5..3495bb919 100644 +--- a/grub-core/bus/usb/xhci.c ++++ b/grub-core/bus/usb/xhci.c +@@ -184,7 +184,7 @@ enum + * then we can get it from a trb pointer (provided by evt ring). + */ + #define XHCI_RING(_trb) \ +- ((struct grub_xhci_ring*)((grub_uint32_t)(_trb) & ~(GRUB_XHCI_RING_SIZE-1))) ++ ((struct grub_xhci_ring*)((grub_addr_t)(_trb) & ~(GRUB_XHCI_RING_SIZE-1))) + + /* slot context */ + struct grub_xhci_slotctx { +@@ -495,6 +495,14 @@ grub_xhci_read8(volatile void *addr) { + return (*((volatile grub_uint32_t *)addr)); + } + ++static inline void * ++grub_xhci_read_etrb_ptr(volatile struct grub_xhci_trb *trb) { ++ grub_uint64_t tmp; ++ tmp = (grub_uint64_t)grub_xhci_read32(&trb->ptr_low); ++ tmp |= ((grub_uint64_t)grub_xhci_read32(&trb->ptr_high)) << 32; ++ return (void *)(grub_addr_t)tmp; ++} ++ + static inline grub_uint32_t + grub_xhci_port_read (struct grub_xhci *x, grub_uint32_t port) + { +@@ -664,7 +672,7 @@ static void xhci_process_events(struct grub_xhci *x) + case ER_TRANSFER: + case ER_COMMAND_COMPLETE: + { +- struct grub_xhci_trb *rtrb = (void*)grub_xhci_read32(&etrb->ptr_low); ++ struct grub_xhci_trb *rtrb = grub_xhci_read_etrb_ptr(etrb); + struct grub_xhci_ring *ring = XHCI_RING(rtrb); + volatile struct grub_xhci_trb *evt = &ring->evt; + grub_uint32_t eidx = rtrb - ring->ring + 1; +@@ -697,9 +705,9 @@ static void xhci_process_events(struct grub_xhci *x) + } + grub_xhci_write32(&evts->nidx, nidx); + volatile struct grub_xhci_ir *ir = x->ir; +- grub_uint32_t erdp = (grub_uint32_t)(evts->ring + nidx); +- grub_xhci_write32(&ir->erdp_low, erdp); +- grub_xhci_write32(&ir->erdp_high, 0); ++ grub_uint64_t erdp = (grub_addr_t)(void *)(&evts->ring[nidx]); ++ grub_xhci_write32(&ir->erdp_low, erdp & 0xffffffff); ++ grub_xhci_write32(&ir->erdp_high, erdp >> 32); + } + } + +@@ -800,7 +808,7 @@ static void xhci_trb_queue(volatile struct grub_xhci_ring *ring, + grub_uint32_t xferlen, grub_uint32_t flags) + { + grub_dprintf("xhci", "%s: ring %p data %llx len %d flags 0x%x remain 0x%x\n", __func__, +- ring, data_or_addr, xferlen & 0x1ffff, flags, xferlen >> 17); ++ ring, (unsigned long long)data_or_addr, xferlen & 0x1ffff, flags, xferlen >> 17); + + if (xhci_ring_full(ring)) + { +@@ -1907,7 +1915,7 @@ grub_xhci_setup_transfer (grub_usb_controller_t dev, + if (transfer->type == GRUB_USB_TRANSACTION_TYPE_CONTROL) + { + volatile struct grub_usb_packet_setup *setupdata; +- setupdata = (void *)transfer->transactions[0].data; ++ setupdata = (void *)(grub_addr_t)transfer->transactions[0].data; + grub_dprintf("xhci", "%s: CONTROLL TRANS req %d\n", __func__, setupdata->request); + grub_dprintf("xhci", "%s: CONTROLL TRANS length %d\n", __func__, setupdata->length); + +@@ -1974,7 +1982,7 @@ grub_xhci_setup_transfer (grub_usb_controller_t dev, + /* Assume the ring has enough free space for all TRBs */ + if (flags & TRB_TR_IDT && tr->size <= (int)sizeof(inline_data)) + { +- grub_memcpy(&inline_data, (void *)tr->data, tr->size); ++ grub_memcpy(&inline_data, (void *)(grub_addr_t)tr->data, tr->size); + xhci_trb_queue(reqs, inline_data, tr->size, flags); + } + else +-- +2.39.2 + diff --git a/config/grub/xhci/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch b/config/grub/xhci/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch new file mode 100644 index 00000000..b00611a0 --- /dev/null +++ b/config/grub/xhci/patches/0006-nvme/0001-Add-native-NVMe-driver-based-on-SeaBIOS.patch @@ -0,0 +1,1074 @@ +From ef9d61ae9ed490301adf9ee064a9fc1190069d81 Mon Sep 17 00:00:00 2001 +From: Mate Kukri <km@mkukri.xyz> +Date: Mon, 20 May 2024 11:43:35 +0100 +Subject: Add native NVMe driver based on SeaBIOS + +Tested to successfully boot Debian on QEMU and OptiPlex 3050. + +Signed-off-by: Mate Kukri <km@mkukri.xyz> +--- + Makefile.am | 2 +- + grub-core/Makefile.core.def | 6 + + grub-core/commands/nativedisk.c | 1 + + grub-core/disk/nvme-int.h | 208 +++++++++ + grub-core/disk/nvme.c | 781 ++++++++++++++++++++++++++++++++ + include/grub/disk.h | 1 + + 6 files changed, 998 insertions(+), 1 deletion(-) + create mode 100644 grub-core/disk/nvme-int.h + create mode 100644 grub-core/disk/nvme.c + +diff --git a/Makefile.am b/Makefile.am +index 65016f856..7bc0866ba 100644 +--- a/Makefile.am ++++ b/Makefile.am +@@ -434,7 +434,7 @@ if COND_i386_coreboot + FS_PAYLOAD_MODULES ?= $(shell cat grub-core/fs.lst) + default_payload.elf: grub-mkstandalone grub-mkimage FORCE + test -f $@ && rm $@ || true +- pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata xhci ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg ++ pkgdatadir=. ./grub-mkstandalone --grub-mkimage=./grub-mkimage -O i386-coreboot -o $@ --modules='ahci pata nvme xhci ehci uhci ohci usb_keyboard usbms part_msdos ext2 fat at_keyboard part_gpt usbserial_usbdebug cbfs' --install-modules='ls linux search configfile normal cbtime cbls memrw iorw minicmd lsmmap lspci halt reboot hexdump pcidump regexp setpci lsacpi chain test serial multiboot cbmemc linux16 gzio echo help syslinuxcfg xnu $(FS_PAYLOAD_MODULES) password_pbkdf2 $(EXTRA_PAYLOAD_MODULES)' --fonts= --themes= --locales= -d grub-core/ /boot/grub/grub.cfg=$(srcdir)/coreboot.cfg + endif + + endif +diff --git a/grub-core/Makefile.core.def b/grub-core/Makefile.core.def +index ea782666d..0f893369a 100644 +--- a/grub-core/Makefile.core.def ++++ b/grub-core/Makefile.core.def +@@ -2602,3 +2602,9 @@ module = { + efi = commands/bli.c; + enable = efi; + }; ++ ++module = { ++ name = nvme; ++ common = disk/nvme.c; ++ enable = pci; ++}; +diff --git a/grub-core/commands/nativedisk.c b/grub-core/commands/nativedisk.c +index 580c8d3b0..a2c766fbd 100644 +--- a/grub-core/commands/nativedisk.c ++++ b/grub-core/commands/nativedisk.c +@@ -78,6 +78,7 @@ get_uuid (const char *name, char **uuid, int getnative) + case GRUB_DISK_DEVICE_ATA_ID: + case GRUB_DISK_DEVICE_SCSI_ID: + case GRUB_DISK_DEVICE_XEN: ++ case GRUB_DISK_DEVICE_NVME_ID: + if (getnative) + break; + /* FALLTHROUGH */ +diff --git a/grub-core/disk/nvme-int.h b/grub-core/disk/nvme-int.h +new file mode 100644 +index 000000000..1295b58aa +--- /dev/null ++++ b/grub-core/disk/nvme-int.h +@@ -0,0 +1,208 @@ ++// NVMe datastructures and constants ++// ++// Copyright 2017 Amazon.com, Inc. or its affiliates. ++// ++// This file may be distributed under the terms of the GNU LGPLv3 license. ++ ++#ifndef __NVME_INT_H ++#define __NVME_INT_H ++ ++#include <grub/types.h> ++ ++/* Data structures */ ++ ++/* The register file of a NVMe host controller. This struct follows the naming ++ scheme in the NVMe specification. */ ++struct nvme_reg { ++ grub_uint64_t cap; /* controller capabilities */ ++ grub_uint32_t vs; /* version */ ++ grub_uint32_t intms; /* interrupt mask set */ ++ grub_uint32_t intmc; /* interrupt mask clear */ ++ grub_uint32_t cc; /* controller configuration */ ++ grub_uint32_t _res0; ++ grub_uint32_t csts; /* controller status */ ++ grub_uint32_t _res1; ++ grub_uint32_t aqa; /* admin queue attributes */ ++ grub_uint64_t asq; /* admin submission queue base address */ ++ grub_uint64_t acq; /* admin completion queue base address */ ++}; ++ ++/* Submission queue entry */ ++struct nvme_sqe { ++ union { ++ grub_uint32_t dword[16]; ++ struct { ++ grub_uint32_t cdw0; /* Command DWORD 0 */ ++ grub_uint32_t nsid; /* Namespace ID */ ++ grub_uint64_t _res0; ++ grub_uint64_t mptr; /* metadata ptr */ ++ ++ grub_uint64_t dptr_prp1; ++ grub_uint64_t dptr_prp2; ++ }; ++ }; ++}; ++ ++/* Completion queue entry */ ++struct nvme_cqe { ++ union { ++ grub_uint32_t dword[4]; ++ struct { ++ grub_uint32_t cdw0; ++ grub_uint32_t _res0; ++ grub_uint16_t sq_head; ++ grub_uint16_t sq_id; ++ grub_uint16_t cid; ++ grub_uint16_t status; ++ }; ++ }; ++}; ++ ++/* The common part of every submission or completion queue. */ ++struct nvme_queue { ++ grub_uint32_t *dbl; /* doorbell */ ++ grub_uint16_t mask; /* length - 1 */ ++}; ++ ++struct nvme_cq { ++ struct nvme_queue common; ++ struct nvme_cqe *cqe; ++ ++ /* We have read upto (but not including) this entry in the queue. */ ++ grub_uint16_t head; ++ ++ /* The current phase bit the controller uses to indicate that it has written ++ a new entry. This is inverted after each wrap. */ ++ unsigned phase : 1; ++}; ++ ++struct nvme_sq { ++ struct nvme_queue common; ++ struct nvme_sqe *sqe; ++ ++ /* Corresponding completion queue. We only support a single SQ per CQ. */ ++ struct nvme_cq *cq; ++ ++ /* The last entry the controller has fetched. */ ++ grub_uint16_t head; ++ ++ /* The last value we have written to the tail doorbell. */ ++ grub_uint16_t tail; ++}; ++ ++struct nvme_ctrl { ++ grub_pci_device_t pci; ++ struct nvme_reg volatile *reg; ++ ++ grub_uint32_t ctrlnum; ++ ++ grub_uint32_t doorbell_stride; /* in bytes */ ++ ++ struct nvme_sq admin_sq; ++ struct nvme_cq admin_cq; ++ ++ grub_uint32_t ns_count; ++ ++ struct nvme_sq io_sq; ++ struct nvme_cq io_cq; ++}; ++ ++struct nvme_namespace { ++ struct nvme_namespace *next; ++ struct nvme_namespace **prev; ++ ++ char *devname; ++ ++ grub_uint32_t nsnum; ++ ++ struct nvme_ctrl *ctrl; ++ ++ grub_uint32_t ns_id; ++ ++ grub_uint64_t lba_count; /* The total amount of sectors. */ ++ ++ grub_uint32_t block_size; ++ grub_uint32_t metadata_size; ++ grub_uint32_t max_req_size; ++}; ++ ++/* Data structures for NVMe admin identify commands */ ++ ++struct nvme_identify_ctrl { ++ grub_uint16_t vid; ++ grub_uint16_t ssvid; ++ char sn[20]; ++ char mn[40]; ++ char fr[8]; ++ ++ grub_uint8_t rab; ++ grub_uint8_t ieee[3]; ++ grub_uint8_t cmic; ++ grub_uint8_t mdts; ++ ++ char _boring[516 - 78]; ++ ++ grub_uint32_t nn; /* number of namespaces */ ++}; ++ ++struct nvme_identify_ns_list { ++ grub_uint32_t ns_id[1024]; ++}; ++ ++struct nvme_lba_format { ++ grub_uint16_t ms; ++ grub_uint8_t lbads; ++ grub_uint8_t rp; ++}; ++ ++struct nvme_identify_ns { ++ grub_uint64_t nsze; ++ grub_uint64_t ncap; ++ grub_uint64_t nuse; ++ grub_uint8_t nsfeat; ++ grub_uint8_t nlbaf; ++ grub_uint8_t flbas; ++ ++ char _boring[128 - 27]; ++ ++ struct nvme_lba_format lbaf[16]; ++}; ++ ++union nvme_identify { ++ struct nvme_identify_ns ns; ++ struct nvme_identify_ctrl ctrl; ++ struct nvme_identify_ns_list ns_list; ++}; ++ ++/* NVMe constants */ ++ ++#define NVME_CAP_CSS_NVME (1ULL << 37) ++ ++#define NVME_CSTS_FATAL (1U << 1) ++#define NVME_CSTS_RDY (1U << 0) ++ ++#define NVME_CC_EN (1U << 0) ++ ++#define NVME_SQE_OPC_ADMIN_CREATE_IO_SQ 1U ++#define NVME_SQE_OPC_ADMIN_CREATE_IO_CQ 5U ++#define NVME_SQE_OPC_ADMIN_IDENTIFY 6U ++ ++#define NVME_SQE_OPC_IO_WRITE 1U ++#define NVME_SQE_OPC_IO_READ 2U ++ ++#define NVME_ADMIN_IDENTIFY_CNS_ID_NS 0U ++#define NVME_ADMIN_IDENTIFY_CNS_ID_CTRL 1U ++#define NVME_ADMIN_IDENTIFY_CNS_GET_NS_LIST 2U ++ ++#define NVME_CQE_DW3_P (1U << 16) ++ ++#define NVME_PAGE_SIZE 4096 ++#define NVME_PAGE_MASK ~(NVME_PAGE_SIZE - 1) ++ ++/* Length for the queue entries. */ ++#define NVME_SQE_SIZE_LOG 6 ++#define NVME_CQE_SIZE_LOG 4 ++ ++#endif ++ ++/* EOF */ +diff --git a/grub-core/disk/nvme.c b/grub-core/disk/nvme.c +new file mode 100644 +index 000000000..093237c70 +--- /dev/null ++++ b/grub-core/disk/nvme.c +@@ -0,0 +1,781 @@ ++// Low level NVMe disk access ++// ++// Based on SeaBIOS NVMe driver - Copyright 2017 Amazon.com, Inc. or its affiliates. ++// Port to GRUB2 done by Mate Kukri ++// ++// This file may be distributed under the terms of the GNU LGPLv3 license. ++ ++#include <grub/disk.h> ++#include <grub/dl.h> ++#include <grub/pci.h> ++#include "nvme-int.h" ++ ++GRUB_MOD_LICENSE ("GPLv3"); /* LGPLv3 in reality but it is GPLv3 compatible */ ++ ++static grub_uint32_t grub_nvme_ctrlcnt; ++static grub_uint32_t grub_nvme_nscnt; ++ ++static struct nvme_namespace *grub_nvme_namespaces; ++ ++// Page aligned "dma bounce buffer" of size NVME_PAGE_SIZE ++static void *nvme_dma_buffer; ++ ++static void * ++zalloc_page_aligned(grub_uint32_t size) ++{ ++ void *res = grub_memalign(NVME_PAGE_SIZE, size); ++ if (res) grub_memset(res, 0, size); ++ return res; ++} ++ ++static void ++nvme_init_queue_common(struct nvme_ctrl *ctrl, struct nvme_queue *q, grub_uint16_t q_idx, ++ grub_uint16_t length) ++{ ++ grub_memset(q, 0, sizeof(*q)); ++ q->dbl = (grub_uint32_t *)((char *)ctrl->reg + 0x1000 + q_idx * ctrl->doorbell_stride); ++ grub_dprintf("nvme", " q %p q_idx %u dbl %p\n", q, q_idx, q->dbl); ++ q->mask = length - 1; ++} ++ ++static int ++nvme_init_sq(struct nvme_ctrl *ctrl, struct nvme_sq *sq, grub_uint16_t q_idx, grub_uint16_t length, ++ struct nvme_cq *cq) ++{ ++ nvme_init_queue_common(ctrl, &sq->common, q_idx, length); ++ sq->sqe = zalloc_page_aligned(sizeof(*sq->sqe) * length); ++ ++ if (!sq->sqe) { ++ return -1; ++ } ++ ++ grub_dprintf("nvme", "sq %p q_idx %u sqe %p\n", sq, q_idx, sq->sqe); ++ sq->cq = cq; ++ sq->head = 0; ++ sq->tail = 0; ++ ++ return 0; ++} ++ ++static int ++nvme_init_cq(struct nvme_ctrl *ctrl, struct nvme_cq *cq, grub_uint16_t q_idx, grub_uint16_t length) ++{ ++ nvme_init_queue_common(ctrl, &cq->common, q_idx, length); ++ cq->cqe = zalloc_page_aligned(sizeof(*cq->cqe) * length); ++ if (!cq->cqe) { ++ return -1; ++ } ++ ++ cq->head = 0; ++ ++ /* All CQE phase bits are initialized to zero. This means initially we wait ++ for the host controller to set these to 1. */ ++ cq->phase = 1; ++ ++ return 0; ++} ++ ++static int ++nvme_poll_cq(struct nvme_cq *cq) ++{ ++ grub_uint32_t dw3 = *(volatile grub_uint32_t *) &cq->cqe[cq->head].dword[3]; ++ return (!!(dw3 & NVME_CQE_DW3_P) == cq->phase); ++} ++ ++static int ++nvme_is_cqe_success(struct nvme_cqe const *cqe) ++{ ++ return ((cqe->status >> 1) & 0xFF) == 0; ++} ++ ++static struct nvme_cqe ++nvme_error_cqe(void) ++{ ++ struct nvme_cqe r; ++ ++ /* 0xFF is a vendor specific status code != success. Should be okay for ++ indicating failure. */ ++ grub_memset(&r, 0xFF, sizeof(r)); ++ return r; ++} ++ ++static struct nvme_cqe ++nvme_consume_cqe(struct nvme_sq *sq) ++{ ++ struct nvme_cq *cq = sq->cq; ++ ++ if (!nvme_poll_cq(cq)) { ++ /* Cannot consume a completion queue entry, if there is none ready. */ ++ return nvme_error_cqe(); ++ } ++ ++ struct nvme_cqe *cqe = &cq->cqe[cq->head]; ++ grub_uint16_t cq_next_head = (cq->head + 1) & cq->common.mask; ++ grub_dprintf("nvme", "cq %p head %u -> %u\n", cq, cq->head, cq_next_head); ++ if (cq_next_head < cq->head) { ++ grub_dprintf("nvme", "cq %p wrap\n", cq); ++ cq->phase = ~cq->phase; ++ } ++ cq->head = cq_next_head; ++ ++ /* Update the submission queue head. */ ++ if (cqe->sq_head != sq->head) { ++ sq->head = cqe->sq_head; ++ grub_dprintf("nvme", "sq %p advanced to %u\n", sq, cqe->sq_head); ++ } ++ ++ /* Tell the controller that we consumed the completion. */ ++ *(volatile grub_uint32_t *) cq->common.dbl = cq->head; ++ ++ return *cqe; ++} ++ ++static struct nvme_cqe ++nvme_wait(struct nvme_sq *sq) ++{ ++ // static const unsigned nvme_timeout = 5000 /* ms */; ++ // grub_uint32_t to = timer_calc(nvme_timeout); ++ while (!nvme_poll_cq(sq->cq)) { ++ /* FIXME ++ yield(); ++ ++ if (timer_check(to)) { ++ warn_timeout(); ++ return nvme_error_cqe(); ++ }*/ ++ } ++ ++ return nvme_consume_cqe(sq); ++} ++ ++/* Returns the next submission queue entry (or NULL if the queue is full). It ++ also fills out Command Dword 0 and clears the rest. */ ++static struct nvme_sqe * ++nvme_get_next_sqe(struct nvme_sq *sq, grub_uint8_t opc, void *metadata, void *data, void *data2) ++{ ++ if (((sq->head + 1) & sq->common.mask) == sq->tail) { ++ grub_dprintf("nvme", "submission queue is full\n"); ++ return NULL; ++ } ++ ++ struct nvme_sqe *sqe = &sq->sqe[sq->tail]; ++ grub_dprintf("nvme", "sq %p next_sqe %u\n", sq, sq->tail); ++ ++ grub_memset(sqe, 0, sizeof(*sqe)); ++ sqe->cdw0 = opc | (sq->tail << 16 /* CID */); ++ sqe->mptr = (grub_uint32_t)metadata; ++ sqe->dptr_prp1 = (grub_uint32_t)data; ++ sqe->dptr_prp2 = (grub_uint32_t)data2; ++ ++ return sqe; ++} ++ ++/* Call this after you've filled out an sqe that you've got from nvme_get_next_sqe. */ ++static void ++nvme_commit_sqe(struct nvme_sq *sq) ++{ ++ grub_dprintf("nvme", "sq %p commit_sqe %u\n", sq, sq->tail); ++ sq->tail = (sq->tail + 1) & sq->common.mask; ++ *(volatile grub_uint32_t *) sq->common.dbl = sq->tail; ++} ++ ++/* Perform an identify command on the admin queue and return the resulting ++ buffer. This may be a NULL pointer, if something failed. This function ++ cannot be used after initialization, because it uses buffers in tmp zone. */ ++static union nvme_identify * ++nvme_admin_identify(struct nvme_ctrl *ctrl, grub_uint8_t cns, grub_uint32_t nsid) ++{ ++ union nvme_identify *identify_buf = zalloc_page_aligned(4096); ++ if (!identify_buf) ++ return NULL; ++ ++ struct nvme_sqe *cmd_identify; ++ cmd_identify = nvme_get_next_sqe(&ctrl->admin_sq, ++ NVME_SQE_OPC_ADMIN_IDENTIFY, NULL, ++ identify_buf, NULL); ++ if (!cmd_identify) ++ goto error; ++ ++ cmd_identify->nsid = nsid; ++ cmd_identify->dword[10] = cns; ++ ++ nvme_commit_sqe(&ctrl->admin_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ goto error; ++ } ++ ++ return identify_buf; ++ error: ++ grub_free(identify_buf); ++ return NULL; ++} ++ ++static struct nvme_identify_ctrl * ++nvme_admin_identify_ctrl(struct nvme_ctrl *ctrl) ++{ ++ return &nvme_admin_identify(ctrl, NVME_ADMIN_IDENTIFY_CNS_ID_CTRL, 0)->ctrl; ++} ++ ++static struct nvme_identify_ns * ++nvme_admin_identify_ns(struct nvme_ctrl *ctrl, grub_uint32_t ns_id) ++{ ++ return &nvme_admin_identify(ctrl, NVME_ADMIN_IDENTIFY_CNS_ID_NS, ++ ns_id)->ns; ++} ++ ++static void ++nvme_probe_ns(struct nvme_ctrl *ctrl, grub_uint32_t ns_idx, grub_uint8_t mdts) ++{ ++ grub_uint32_t ns_id = ns_idx + 1; ++ ++ struct nvme_identify_ns *id = nvme_admin_identify_ns(ctrl, ns_id); ++ if (!id) { ++ grub_dprintf("nvme", "NVMe couldn't identify namespace %u.\n", ns_id); ++ goto free_buffer; ++ } ++ ++ grub_uint8_t current_lba_format = id->flbas & 0xF; ++ if (current_lba_format > id->nlbaf) { ++ grub_dprintf("nvme", "NVMe NS %u: current LBA format %u is beyond what the " ++ " namespace supports (%u)?\n", ++ ns_id, current_lba_format, id->nlbaf + 1); ++ goto free_buffer; ++ } ++ ++ if (!id->nsze) { ++ grub_dprintf("nvme", "NVMe NS %u is inactive.\n", ns_id); ++ goto free_buffer; ++ } ++ ++ if (!nvme_dma_buffer) { ++ nvme_dma_buffer = zalloc_page_aligned(NVME_PAGE_SIZE); ++ if (!nvme_dma_buffer) { ++ goto free_buffer; ++ } ++ } ++ ++ struct nvme_namespace *ns = grub_malloc(sizeof(*ns)); ++ if (!ns) { ++ goto free_buffer; ++ } ++ grub_memset(ns, 0, sizeof(*ns)); ++ ns->ctrl = ctrl; ++ ns->ns_id = ns_id; ++ ns->lba_count = id->nsze; ++ ++ struct nvme_lba_format *fmt = &id->lbaf[current_lba_format]; ++ ++ ns->block_size = 1U << fmt->lbads; ++ ns->metadata_size = fmt->ms; ++ ++ if (ns->block_size > NVME_PAGE_SIZE) { ++ /* If we see devices that trigger this path, we need to increase our ++ buffer size. */ ++ grub_free(ns); ++ goto free_buffer; ++ } ++ ++ if (mdts) { ++ ns->max_req_size = ((1U << mdts) * NVME_PAGE_SIZE) / ns->block_size; ++ grub_dprintf("nvme", "NVME NS %u max request size: %d sectors\n", ++ ns_id, ns->max_req_size); ++ } else { ++ ns->max_req_size = -1U; ++ } ++ ++ ns->devname = grub_xasprintf("nvme%un%u", ctrl->ctrlnum, ns_id); ++ ns->nsnum = grub_nvme_nscnt++; ++ ++ grub_list_push (GRUB_AS_LIST_P (&grub_nvme_namespaces), GRUB_AS_LIST (ns)); ++ ++free_buffer: ++ grub_free(id); ++} ++ ++ ++/* Release memory allocated for a completion queue */ ++static void ++nvme_destroy_cq(struct nvme_cq *cq) ++{ ++ grub_free(cq->cqe); ++ cq->cqe = NULL; ++} ++ ++/* Release memory allocated for a submission queue */ ++static void ++nvme_destroy_sq(struct nvme_sq *sq) ++{ ++ grub_free(sq->sqe); ++ sq->sqe = NULL; ++} ++ ++/* Returns 0 on success. */ ++static int ++nvme_create_io_cq(struct nvme_ctrl *ctrl, struct nvme_cq *cq, grub_uint16_t q_idx) ++{ ++ int rc; ++ struct nvme_sqe *cmd_create_cq; ++ grub_uint32_t length = 1 + (ctrl->reg->cap & 0xffff); ++ if (length > NVME_PAGE_SIZE / sizeof(struct nvme_cqe)) ++ length = NVME_PAGE_SIZE / sizeof(struct nvme_cqe); ++ ++ rc = nvme_init_cq(ctrl, cq, q_idx, length); ++ if (rc) { ++ goto err; ++ } ++ ++ cmd_create_cq = nvme_get_next_sqe(&ctrl->admin_sq, ++ NVME_SQE_OPC_ADMIN_CREATE_IO_CQ, NULL, ++ cq->cqe, NULL); ++ if (!cmd_create_cq) { ++ goto err_destroy_cq; ++ } ++ ++ cmd_create_cq->dword[10] = (cq->common.mask << 16) | (q_idx >> 1); ++ cmd_create_cq->dword[11] = 1 /* physically contiguous */; ++ ++ nvme_commit_sqe(&ctrl->admin_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ grub_dprintf("nvme", "create io cq failed: %08x %08x %08x %08x\n", ++ cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); ++ ++ goto err_destroy_cq; ++ } ++ ++ return 0; ++ ++err_destroy_cq: ++ nvme_destroy_cq(cq); ++err: ++ return -1; ++} ++ ++/* Returns 0 on success. */ ++static int ++nvme_create_io_sq(struct nvme_ctrl *ctrl, struct nvme_sq *sq, grub_uint16_t q_idx, struct nvme_cq *cq) ++{ ++ int rc; ++ struct nvme_sqe *cmd_create_sq; ++ grub_uint32_t length = 1 + (ctrl->reg->cap & 0xffff); ++ if (length > NVME_PAGE_SIZE / sizeof(struct nvme_cqe)) ++ length = NVME_PAGE_SIZE / sizeof(struct nvme_cqe); ++ ++ rc = nvme_init_sq(ctrl, sq, q_idx, length, cq); ++ if (rc) { ++ goto err; ++ } ++ ++ cmd_create_sq = nvme_get_next_sqe(&ctrl->admin_sq, ++ NVME_SQE_OPC_ADMIN_CREATE_IO_SQ, NULL, ++ sq->sqe, NULL); ++ if (!cmd_create_sq) { ++ goto err_destroy_sq; ++ } ++ ++ cmd_create_sq->dword[10] = (sq->common.mask << 16) | (q_idx >> 1); ++ cmd_create_sq->dword[11] = (q_idx >> 1) << 16 | 1 /* contiguous */; ++ grub_dprintf("nvme", "sq %p create dword10 %08x dword11 %08x\n", sq, ++ cmd_create_sq->dword[10], cmd_create_sq->dword[11]); ++ ++ nvme_commit_sqe(&ctrl->admin_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ grub_dprintf("nvme", "create io sq failed: %08x %08x %08x %08x\n", ++ cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); ++ goto err_destroy_sq; ++ } ++ ++ return 0; ++ ++err_destroy_sq: ++ nvme_destroy_sq(sq); ++err: ++ return -1; ++} ++ ++/* Reads count sectors into buf. The buffer cannot cross page boundaries. */ ++static int ++nvme_io_xfer(struct nvme_namespace *ns, grub_uint64_t lba, void *prp1, void *prp2, ++ grub_uint16_t count, int write) ++{ ++ if (((grub_uint32_t)prp1 & 0x3) || ((grub_uint32_t)prp2 & 0x3)) { ++ /* Buffer is misaligned */ ++ return -1; ++ } ++ ++ struct nvme_sqe *io_read = nvme_get_next_sqe(&ns->ctrl->io_sq, ++ write ? NVME_SQE_OPC_IO_WRITE ++ : NVME_SQE_OPC_IO_READ, ++ NULL, prp1, prp2); ++ io_read->nsid = ns->ns_id; ++ io_read->dword[10] = (grub_uint32_t)lba; ++ io_read->dword[11] = (grub_uint32_t)(lba >> 32); ++ io_read->dword[12] = (1U << 31 /* limited retry */) | (count - 1); ++ ++ nvme_commit_sqe(&ns->ctrl->io_sq); ++ ++ struct nvme_cqe cqe = nvme_wait(&ns->ctrl->io_sq); ++ ++ if (!nvme_is_cqe_success(&cqe)) { ++ grub_dprintf("nvme", "read io: %08x %08x %08x %08x\n", ++ cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); ++ ++ return -1; ++ } ++ ++ grub_dprintf("nvme", "ns %u %s lba %llu+%u\n", ns->ns_id, write ? "write" : "read", ++ lba, count); ++ return count; ++} ++ ++// Transfer up to one page of data using the internal dma bounce buffer ++static int ++nvme_bounce_xfer(struct nvme_namespace *ns, grub_uint64_t lba, void *buf, grub_uint16_t count, ++ int write) ++{ ++ grub_uint16_t const max_blocks = NVME_PAGE_SIZE / ns->block_size; ++ grub_uint16_t blocks = count < max_blocks ? count : max_blocks; ++ ++ if (write) ++ grub_memcpy(nvme_dma_buffer, buf, blocks * ns->block_size); ++ ++ int res = nvme_io_xfer(ns, lba, nvme_dma_buffer, NULL, blocks, write); ++ ++ if (!write && res >= 0) ++ grub_memcpy(buf, nvme_dma_buffer, res * ns->block_size); ++ ++ return res; ++} ++ ++#define NVME_MAX_PRPL_ENTRIES 15 /* Allows requests up to 64kb */ ++ ++// Transfer data using page list (if applicable) ++static int ++nvme_prpl_xfer(struct nvme_namespace *ns, grub_uint64_t lba, void *buf, grub_uint16_t count, ++ int write) ++{ ++ grub_uint32_t base = (long)buf; ++ grub_int32_t size; ++ ++ if (count > ns->max_req_size) ++ count = ns->max_req_size; ++ ++ size = count * ns->block_size; ++ /* Special case for transfers that fit into PRP1, but are unaligned */ ++ if (((size + (base & ~NVME_PAGE_MASK)) <= NVME_PAGE_SIZE)) ++ goto single; ++ ++ /* Every request has to be page aligned */ ++ if (base & ~NVME_PAGE_MASK) ++ goto bounce; ++ ++ /* Make sure a full block fits into the last chunk */ ++ if (size & (ns->block_size - 1ULL)) ++ goto bounce; ++ ++ /* Build PRP list if we need to describe more than 2 pages */ ++ if ((ns->block_size * count) > (NVME_PAGE_SIZE * 2)) { ++ grub_uint32_t prpl_len = 0; ++ grub_uint64_t *prpl = nvme_dma_buffer; ++ int first_page = 1; ++ for (; size > 0; base += NVME_PAGE_SIZE, size -= NVME_PAGE_SIZE) { ++ if (first_page) { ++ /* First page is special */ ++ first_page = 0; ++ continue; ++ } ++ if (prpl_len >= NVME_MAX_PRPL_ENTRIES) ++ goto bounce; ++ prpl[prpl_len++] = base; ++ } ++ return nvme_io_xfer(ns, lba, buf, prpl, count, write); ++ } ++ ++ /* Directly embed the 2nd page if we only need 2 pages */ ++ if ((ns->block_size * count) > NVME_PAGE_SIZE) ++ return nvme_io_xfer(ns, lba, buf, (char *) buf + NVME_PAGE_SIZE, count, write); ++ ++single: ++ /* One page is enough, don't expose anything else */ ++ return nvme_io_xfer(ns, lba, buf, NULL, count, write); ++ ++bounce: ++ /* Use bounce buffer to make transfer */ ++ return nvme_bounce_xfer(ns, lba, buf, count, write); ++} ++ ++static int ++nvme_create_io_queues(struct nvme_ctrl *ctrl) ++{ ++ if (nvme_create_io_cq(ctrl, &ctrl->io_cq, 3)) ++ goto err; ++ ++ if (nvme_create_io_sq(ctrl, &ctrl->io_sq, 2, &ctrl->io_cq)) ++ goto err_free_cq; ++ ++ return 0; ++ ++ err_free_cq: ++ nvme_destroy_cq(&ctrl->io_cq); ++ err: ++ return -1; ++} ++ ++/* Waits for CSTS.RDY to match rdy. Returns 0 on success. */ ++static int ++nvme_wait_csts_rdy(struct nvme_ctrl *ctrl, unsigned rdy) ++{ ++ // grub_uint32_t const max_to = 500 /* ms */ * ((ctrl->reg->cap >> 24) & 0xFFU); ++ // grub_uint32_t to = timer_calc(max_to); ++ grub_uint32_t csts; ++ ++ while (rdy != ((csts = ctrl->reg->csts) & NVME_CSTS_RDY)) { ++ // FIXME ++ //yield(); ++ ++ if (csts & NVME_CSTS_FATAL) { ++ grub_dprintf("nvme", "NVMe fatal error during controller shutdown\n"); ++ return -1; ++ } ++ ++ /* ++ if (timer_check(to)) { ++ warn_timeout(); ++ return -1; ++ }*/ ++ } ++ ++ return 0; ++} ++ ++/* Returns 0 on success. */ ++static int grub_nvme_controller_enable(struct nvme_ctrl *ctrl) ++{ ++ grub_pci_address_t addr; ++ int rc; ++ ++ addr = grub_pci_make_address (ctrl->pci, GRUB_PCI_REG_COMMAND); ++ grub_pci_write_word (addr, grub_pci_read_word (addr) | GRUB_PCI_COMMAND_BUS_MASTER); ++ ++ /* Turn the controller off. */ ++ ctrl->reg->cc = 0; ++ if (nvme_wait_csts_rdy(ctrl, 0)) { ++ grub_dprintf("nvme", "NVMe fatal error during controller shutdown\n"); ++ return -1; ++ } ++ ++ ctrl->doorbell_stride = 4U << ((ctrl->reg->cap >> 32) & 0xF); ++ ++ rc = nvme_init_cq(ctrl, &ctrl->admin_cq, 1, ++ NVME_PAGE_SIZE / sizeof(struct nvme_cqe)); ++ if (rc) { ++ return -1; ++ } ++ ++ rc = nvme_init_sq(ctrl, &ctrl->admin_sq, 0, ++ NVME_PAGE_SIZE / sizeof(struct nvme_sqe), &ctrl->admin_cq); ++ if (rc) { ++ goto err_destroy_admin_cq; ++ } ++ ++ ctrl->reg->aqa = ctrl->admin_cq.common.mask << 16 ++ | ctrl->admin_sq.common.mask; ++ ++ ctrl->reg->asq = (grub_uint32_t)ctrl->admin_sq.sqe; ++ ctrl->reg->acq = (grub_uint32_t)ctrl->admin_cq.cqe; ++ ++ grub_dprintf("nvme", " admin submission queue: %p\n", ctrl->admin_sq.sqe); ++ grub_dprintf("nvme", " admin completion queue: %p\n", ctrl->admin_cq.cqe); ++ ++ ctrl->reg->cc = NVME_CC_EN | (NVME_CQE_SIZE_LOG << 20) ++ | (NVME_SQE_SIZE_LOG << 16 /* IOSQES */); ++ ++ if (nvme_wait_csts_rdy(ctrl, 1)) { ++ grub_dprintf("nvme", "NVMe fatal error while enabling controller\n"); ++ goto err_destroy_admin_sq; ++ } ++ ++ /* The admin queue is set up and the controller is ready. Let's figure out ++ what namespaces we have. */ ++ ++ struct nvme_identify_ctrl *identify = nvme_admin_identify_ctrl(ctrl); ++ ++ if (!identify) { ++ grub_dprintf("nvme", "NVMe couldn't identify controller.\n"); ++ goto err_destroy_admin_sq; ++ } ++ ++ grub_dprintf("nvme", "NVMe has %u namespace%s.\n", ++ identify->nn, (identify->nn == 1) ? "" : "s"); ++ ++ ctrl->ns_count = identify->nn; ++ grub_uint8_t mdts = identify->mdts; ++ grub_free(identify); ++ ++ if ((ctrl->ns_count == 0) || nvme_create_io_queues(ctrl)) { ++ /* No point to continue, if the controller says it doesn't have ++ namespaces or we couldn't create I/O queues. */ ++ goto err_destroy_admin_sq; ++ } ++ ++ /* Give the controller a global number */ ++ ctrl->ctrlnum = grub_nvme_ctrlcnt++; ++ ++ /* Populate namespace IDs */ ++ for (grub_uint32_t ns_idx = 0; ns_idx < ctrl->ns_count; ns_idx++) { ++ nvme_probe_ns(ctrl, ns_idx, mdts); ++ } ++ ++ grub_dprintf("nvme", "NVMe initialization complete!\n"); ++ return 0; ++ ++ err_destroy_admin_sq: ++ nvme_destroy_sq(&ctrl->admin_sq); ++ err_destroy_admin_cq: ++ nvme_destroy_cq(&ctrl->admin_cq); ++ return -1; ++} ++ ++static int grub_nvme_pci_probe(grub_pci_device_t dev, grub_pci_id_t pciid __attribute__ ((unused)), void *data __attribute__ ((unused))) ++{ ++ grub_pci_address_t addr; ++ grub_uint32_t class, bar, version; ++ struct nvme_reg volatile *reg; ++ ++ class = grub_pci_read (grub_pci_make_address (dev, GRUB_PCI_REG_CLASS)); ++ if (class >> 16 != 0x0108) ++ return 0; ++ if ((class >> 8 & 0xff) != 2) { /* as of NVM 1.0e */ ++ grub_dprintf("nvme", "Found incompatble NVMe: prog-if=%02x\n", class >> 8 & 0xff); ++ return 0; ++ } ++ ++ bar = grub_pci_read (grub_pci_make_address (dev, GRUB_PCI_REG_ADDRESS_REG0)); ++ reg = grub_pci_device_map_range (dev, bar & GRUB_PCI_ADDR_MEM_MASK, sizeof (*reg)); ++ ++ addr = grub_pci_make_address (dev, GRUB_PCI_REG_COMMAND); ++ grub_pci_write_word (addr, grub_pci_read_word (addr) | GRUB_PCI_COMMAND_MEM_ENABLED); ++ ++ version = reg->vs; ++ grub_dprintf("nvme", "Found NVMe controller with version %u.%u.%u.\n", version >> 16, (version >> 8) & 0xFF, version & 0xFF); ++ grub_dprintf("nvme", " Capabilities %016llx\n", reg->cap); ++ ++ if (~reg->cap & NVME_CAP_CSS_NVME) { ++ grub_dprintf("nvme", "Controller doesn't speak NVMe command set. Skipping.\n"); ++ goto err; ++ } ++ ++ struct nvme_ctrl *ctrl = grub_malloc(sizeof(*ctrl)); ++ if (!ctrl) ++ goto err; ++ ++ grub_memset(ctrl, 0, sizeof(*ctrl)); ++ ++ ctrl->reg = reg; ++ ctrl->pci = dev; ++ ++ if (grub_nvme_controller_enable(ctrl)) ++ goto err_free_ctrl; ++ ++ return 0; ++ ++ err_free_ctrl: ++ grub_free(ctrl); ++ err: ++ grub_dprintf("nvme", "Failed to enable NVMe controller.\n"); ++ return 0; ++} ++ ++static int ++grub_nvme_iterate (grub_disk_dev_iterate_hook_t hook, void *hook_data, grub_disk_pull_t pull) ++{ ++ struct nvme_namespace *ns; ++ ++ if (pull != GRUB_DISK_PULL_NONE) ++ return 0; ++ ++ FOR_LIST_ELEMENTS(ns, grub_nvme_namespaces) ++ if (hook (ns->devname, hook_data)) ++ return 1; ++ ++ return 0; ++} ++ ++static grub_err_t ++grub_nvme_open (const char *name __attribute ((unused)), grub_disk_t disk __attribute ((unused))) ++{ ++ struct nvme_namespace *ns; ++ ++ FOR_LIST_ELEMENTS(ns, grub_nvme_namespaces) ++ if (grub_strcmp (ns->devname, name) == 0) ++ break; ++ ++ if (! ns) ++ return grub_error (GRUB_ERR_UNKNOWN_DEVICE, "can't open device"); ++ ++ disk->total_sectors = ns->lba_count; ++ disk->max_agglomerate = ns->max_req_size; ++ ++ disk->id = ns->nsnum; /* global id of the namespace */ ++ ++ disk->data = ns; ++ ++ return 0; ++} ++ ++static grub_err_t ++nvme_readwrite(struct nvme_namespace *ns, grub_disk_addr_t sector, grub_size_t num_sectors, char *buf, int write) ++{ ++ for (int i = 0; i < num_sectors;) { ++ grub_uint16_t blocks_remaining = num_sectors - i; ++ char *op_buf = buf + i * ns->block_size; ++ int blocks = nvme_prpl_xfer(ns, sector + i, op_buf, blocks_remaining, write); ++ if (blocks < 0) ++ return GRUB_ERR_IO; ++ i += blocks; ++ } ++ return GRUB_ERR_NONE; ++} ++ ++static grub_err_t ++grub_nvme_read (grub_disk_t disk, grub_disk_addr_t sector, grub_size_t num_sectors, char *buf) ++{ ++ return nvme_readwrite((struct nvme_namespace *) disk->data, sector, num_sectors, buf, 0); ++} ++ ++static grub_err_t ++grub_nvme_write (grub_disk_t disk, grub_disk_addr_t sector, grub_size_t num_sectors, const char *buf) ++{ ++ return nvme_readwrite((struct nvme_namespace *) disk->data, sector, num_sectors, buf, 1); ++} ++ ++static struct grub_disk_dev grub_nvme_dev = ++ { ++ .name = "nvme", ++ .id = GRUB_DISK_DEVICE_NVME_ID, ++ .disk_iterate = grub_nvme_iterate, ++ .disk_open = grub_nvme_open, ++ .disk_read = grub_nvme_read, ++ .disk_write = grub_nvme_write, ++ .next = 0 ++ }; ++ ++GRUB_MOD_INIT(nvme) ++{ ++ grub_stop_disk_firmware (); ++ grub_pci_iterate (grub_nvme_pci_probe, NULL); ++ grub_disk_dev_register (&grub_nvme_dev); ++} ++ ++GRUB_MOD_FINI(nvme) ++{ ++ grub_disk_dev_unregister (&grub_nvme_dev); ++} +diff --git a/include/grub/disk.h b/include/grub/disk.h +index fbf23df7f..186e76f0b 100644 +--- a/include/grub/disk.h ++++ b/include/grub/disk.h +@@ -52,6 +52,7 @@ enum grub_disk_dev_id + GRUB_DISK_DEVICE_UBOOTDISK_ID, + GRUB_DISK_DEVICE_XEN, + GRUB_DISK_DEVICE_OBDISK_ID, ++ GRUB_DISK_DEVICE_NVME_ID + }; + + struct grub_disk; +-- +2.39.2 + diff --git a/config/grub/target.cfg b/config/grub/xhci/target.cfg index 2aaeb559..34ab2d24 100644 --- a/config/grub/target.cfg +++ b/config/grub/xhci/target.cfg @@ -1,3 +1,5 @@ +tree="xhci" +rev="8719cc2040368d43ab2de0b6e1b850b2c9cfc5b7" bootstrapargs="--gnulib-srcdir=gnulib/ --no-git" autoconfargs="--with-platform=coreboot --disable-werror" makeargs="FS_PAYLOAD_MODULES=\"\"" diff --git a/config/submodule/grub/default/gnulib/module.cfg b/config/submodule/grub/default/gnulib/module.cfg new file mode 100644 index 00000000..26c28561 --- /dev/null +++ b/config/submodule/grub/default/gnulib/module.cfg @@ -0,0 +1,3 @@ +subrepo="git://git.sv.gnu.org/gnulib" +subrepo_bkup="https://codeberg.org/libreboot/gnulib" +subrev="9f48fb992a3d7e96610c4ce8be969cff2d61a01b" diff --git a/config/submodule/grub/default/module.list b/config/submodule/grub/default/module.list new file mode 100644 index 00000000..0e57095c --- /dev/null +++ b/config/submodule/grub/default/module.list @@ -0,0 +1 @@ +gnulib diff --git a/config/submodule/grub/xhci/gnulib/module.cfg b/config/submodule/grub/xhci/gnulib/module.cfg new file mode 100644 index 00000000..26c28561 --- /dev/null +++ b/config/submodule/grub/xhci/gnulib/module.cfg @@ -0,0 +1,3 @@ +subrepo="git://git.sv.gnu.org/gnulib" +subrepo_bkup="https://codeberg.org/libreboot/gnulib" +subrev="9f48fb992a3d7e96610c4ce8be969cff2d61a01b" diff --git a/config/submodule/grub/xhci/module.list b/config/submodule/grub/xhci/module.list new file mode 100644 index 00000000..0e57095c --- /dev/null +++ b/config/submodule/grub/xhci/module.list @@ -0,0 +1 @@ +gnulib diff --git a/include/git.sh b/include/git.sh index e7fe28b5..ec1ecdd3 100755 --- a/include/git.sh +++ b/include/git.sh @@ -103,17 +103,17 @@ git_prep() prep_submodules() { - [ -f "$tmpgit/.gitmodules" ] || return 0 - mdir="$PWD/config/submodule/$project" [ -n "$tree" ] && mdir="$mdir/$tree" if [ -f "$mdir/module.list" ]; then cat "$mdir/module.list" > "$tmpdir/modules" || \ $err "!cp $mdir/module.list $tmpdir/modules" - else + elif [ -f "$tmpgit/.gitmodules" ]; then git -C "$tmpgit" submodule status | awk '{print $2}' > \ "$tmpdir/modules" || $err "$mdir: cannot list submodules" + else + return 0 fi while read -r msrcdir; do diff --git a/include/lib.sh b/include/lib.sh index eff55511..44ec3623 100755 --- a/include/lib.sh +++ b/include/lib.sh @@ -11,10 +11,8 @@ cbdir="src/coreboot/default" cbcfgsdir="config/coreboot" ifdtool="cbutils/default/ifdtool" cbfstool="cbutils/default/cbfstool" -grubcfgsdir="config/grub" -layoutdir="/boot/grub/layouts" -. "$grubcfgsdir/modules.list" tmpgit="$PWD/tmp/gitclone" +grubdata="config/data/grub" err="err_" err_() diff --git a/script/roms b/script/roms index 1e596192..7e5e1be6 100755 --- a/script/roms +++ b/script/roms @@ -12,7 +12,6 @@ set -u -e seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin" grub_background="background1280x800.png" -grubelf="elf/grub/grub.elf" cfgsdir="config/coreboot" picosrc="src/pico-serprog" picosdk="src/pico-sdk" @@ -23,7 +22,7 @@ stm32src="src/stm32-vserprog" pv="payload_uboot payload_grub_withseabios payload_seabios payload_memtest t" pv="$pv payload_seabios_withgrub payload_seabios_grubonly payload_grub mt86bin" v="romdir cbrom initmode displaymode cbcfg targetdir tree keymaps release" -v="$v grub_timeout ubdir board grub_scan_disk uboot_config" +v="$v grub_timeout ubdir board grub_scan_disk uboot_config grubtree grubelf" eval "$(setvars "n" $pv serprog)" eval "$(setvars "" $v boards _displaymode _payload _keyboard all targets \ serprog_boards_dir _scandisk)" @@ -172,6 +171,9 @@ configure_target() [ -z "$_grub_scan_disk" ] && _grub_scan_disk="nvme ahci ata" grub_scan_disk="${_grub_scan_disk# }" + [ -n "$grubtree" ] || grubtree="default" + grubelf="elf/grub/$grubtree/payload/grub.elf" + [ -z "$tree" ] && $err "$board: tree not defined" [ "$payload_memtest" != "y" ] && payload_memtest="n" @@ -225,24 +227,14 @@ build_payloads() build_grub_payload() { - x_ mkdir -p elf/grub - - for keymapfile in config/grub/keymap/*.gkb; do + for keymapfile in "$grubdata/keymap/"*.gkb; do [ -f "$keymapfile" ] && keymaps="$keymaps $keymapfile" done - [ -z "$_keyboard" ] || [ -f "$grubcfgsdir/keymap/$_keyboard.gkb" ] || \ + [ -z "$_keyboard" ] || [ -f "$grubdata/keymap/$_keyboard.gkb" ] || \ $err "build_grub_payload: $_keyboard layout not defined" - [ -n "$_keyboard" ] && keymaps="$grubcfgsdir/keymap/$_keyboard.gkb" - [ -f "$grubelf" ] && return 0 - [ -f "src/grub/grub-mkstandalone" ] || x_ ./update trees -b grub - - ./src/grub/grub-mkstandalone --grub-mkimage="src/grub/grub-mkimage" \ - -O i386-coreboot -o "elf/grub/grub.elf" -d "src/grub/grub-core/" \ - --fonts= --themes= --locales= --modules="$grub_modules" \ - --install-modules="$grub_install_modules" \ - "/boot/grub/grub.cfg=$grubcfgsdir/config/grub_memdisk.cfg" \ - "/boot/grub/grub_default.cfg=$grubcfgsdir/config/grub.cfg" || \ - $err "could not generate grub.elf" + [ -n "$_keyboard" ] && keymaps="$grubdata/keymap/$_keyboard.gkb" + + [ -f "$grubelf" ] || x_ ./update trees -b grub $grubtree; return 0 } build_uboot_payload() @@ -343,7 +335,7 @@ build_grub_roms() # we only need insert background.png once, for each coreboot config: if [ "$displaymode" = "vesafb" ] || \ [ "$displaymode" = "corebootfb" ]; then - backgroundfile="config/grub/background/$grub_background" + backgroundfile="$grubdata/background/$grub_background" "$cbfstool" "$tmprom" add -f "$backgroundfile" -n \ background.png -t raw || $err "!bg, $backgroundfile" fi @@ -376,7 +368,7 @@ build_grub_roms() if [ "$payload_seabios_withgrub" = "y" ] && \ [ "$payload1" != "grub" ]; then x_ "$cbfstool" "$tmpgrubrom" add \ - -f "config/grub/bootorder" -n bootorder -t raw + -f "$grubdata/bootorder" -n bootorder -t raw x_ cprom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom" if [ "$payload_seabios_grubonly" = "y" ]; then x_ "$cbfstool" "$tmpgrubrom" add-int -i 0 \ diff --git a/script/trees b/script/trees index 80037bd8..1075b220 100755 --- a/script/trees +++ b/script/trees @@ -178,9 +178,12 @@ check_config() handle_makefile() { - x_ make clean -C "$cdir" && x_ cp "$config" "$cdir/.config" - [ -n "$mode" ] || make -C "$cdir" silentoldconfig || \ - make -C "$cdir" oldconfig || : + [ "$project" = "grub" ] && [ "${mode%config}" != "$mode" ] && return 0 + + check_makefile "$cdir" && x_ make clean -C "$cdir" + x_ cp "$config" "$cdir/.config" + [ -n "$mode" ] || [ "$project" = "grub" ] || make -C "$cdir" \ + silentoldconfig || make -C "$cdir" oldconfig || : run_make_command || $err "handle_makefile $cdir: no makefile!" @@ -204,6 +207,8 @@ run_make_command() make -C "$cdir" $mode -j$threads $makeargs || $err "!mk $cdir $mode" + [ "$project" = "grub" ] && [ -z "$mode" ] && mkpayload_grub + [ "$mode" != "clean" ] && return 0 make -C "$cdir" distclean 2>/dev/null || : } @@ -232,6 +237,25 @@ check_makefile() [ -f "$1/GNUmakefile" ] || return 1; return 0 } +mkpayload_grub() +{ + [ -f "$grubdata/module/$tree" ] || $err "$tree: grub modules missing" + x_ rm -f "$cdir/grub.elf" + + eval "$(setvars "" grub_modules grub_install_modules)" + + . "$grubdata/module/$tree" || $err "$tree: !source grub modules" + + [ -z "$grub_install_modules" ] && $err "$tree: install modules unset" + [ -z "$grub_modules" ] && $err "$tree: modules unset" + + "${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \ + -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \ + --fonts= --themes= --locales= --modules="$grub_modules" \ + --install-modules="$grub_install_modules" \ + "/boot/grub/grub.cfg=${cdir}/.config" || $err "$tree: !mkgrub" +} + copy_elf() { while read -r f; do |
