path: root/config/coreboot/haswell/patches/0023-mb-dell-optiplex_9020-Implement-late-HWM-initializat.patch

From 05cc767d1398f91533e87db5ceaa0aabb7918425 Mon Sep 17 00:00:00 2001
From: Mate Kukri <kukri.mate@gmail.com>
Date: Thu, 18 Apr 2024 20:28:45 +0100
Subject: [PATCH 1/1] mb/dell/optiplex_9020: Implement late HWM initialization

There are 4 different chassis types specified by vendor firmware, each
with a slightly different HWM configuration.

The chassis type to use is determined at runtime by reading a set of
4 PCH GPIOs: 70, 38, 17, and 1.

Additionally vendor firmware also provides an option to run the fans at
full speed. This is substituted with a coreboot nvram option in this
implementation.

This was tested to make fan control work on my OptiPlex 7020 SFF.

NOTE: This is superficially similar to the OptiPlex 9010's SCH5545
however the OptiPlex 9020's SCH5555 does not use externally
programmed EC firmware.

Change-Id: Ibdccd3fc7364e03e84ca606592928410624eed43
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
---
 src/mainboard/dell/optiplex_9020/Makefile.mk  |   3 +-
 src/mainboard/dell/optiplex_9020/bootblock.c  |  25 +-
 src/mainboard/dell/optiplex_9020/cmos.default |   1 +
 src/mainboard/dell/optiplex_9020/cmos.layout  |   5 +-
 src/mainboard/dell/optiplex_9020/mainboard.c  | 387 ++++++++++++++++++
 src/mainboard/dell/optiplex_9020/sch5555_ec.c |  54 +++
 src/mainboard/dell/optiplex_9020/sch5555_ec.h |  10 +
 7 files changed, 463 insertions(+), 22 deletions(-)
 create mode 100644 src/mainboard/dell/optiplex_9020/sch5555_ec.c
 create mode 100644 src/mainboard/dell/optiplex_9020/sch5555_ec.h

diff --git a/src/mainboard/dell/optiplex_9020/Makefile.mk b/src/mainboard/dell/optiplex_9020/Makefile.mk
index 6ca2f2afaa..08e2e53577 100644
--- a/src/mainboard/dell/optiplex_9020/Makefile.mk
+++ b/src/mainboard/dell/optiplex_9020/Makefile.mk
@@ -2,4 +2,5 @@
 
 romstage-y += gpio.c
 ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
-bootblock-y += bootblock.c
+ramstage-y += sch5555_ec.c
+bootblock-y += bootblock.c sch5555_ec.c
diff --git a/src/mainboard/dell/optiplex_9020/bootblock.c b/src/mainboard/dell/optiplex_9020/bootblock.c
index 2837cf9cf1..e5e759273e 100644
--- a/src/mainboard/dell/optiplex_9020/bootblock.c
+++ b/src/mainboard/dell/optiplex_9020/bootblock.c
@@ -4,29 +4,14 @@
 #include <device/pnp_ops.h>
 #include <superio/smsc/sch555x/sch555x.h>
 #include <southbridge/intel/lynxpoint/pch.h>
-
-static void ec_write(uint8_t addr1, uint16_t addr2, uint8_t val)
-{
-	// Clear EC-to-Host mailbox
-	uint8_t tmp = inb(SCH555x_EMI_IOBASE + 1);
-	outb(tmp, SCH555x_EMI_IOBASE + 1);
-
-	// Send address and value to the EC
-	sch555x_emi_write16(0, (addr1 * 2) | 0x101);
-	sch555x_emi_write32(4, val | (addr2 << 16));
-
-	// Wait for acknowledgement message from EC
-	outb(1, SCH555x_EMI_IOBASE);
-	size_t timeout = 0;
-	do {} while (++timeout < 0xfff && (inb(SCH555x_EMI_IOBASE + 1) & 1) == 0);
-}
+#include "sch5555_ec.h"
 
 struct ec_init_entry {
 	uint16_t addr;
 	uint8_t val;
 };
 
-static void ec_init(void)
+static void bootblock_ec_init(void)
 {
 	/*
 	 * Tables from CORE_PEI
@@ -108,9 +93,9 @@ void mainboard_config_superio(void)
 	outb(0x01, SCH555x_RUNTIME_IOBASE + SCH555x_RUNTIME_UNK1);
 	outb(0x0f, SCH555x_RUNTIME_IOBASE + SCH555x_RUNTIME_LED);
 
-	// Magic EC init
-	ec_init();
+	// Perform bootblock EC initialization
+	bootblock_ec_init();
 
-	// Magic EC init is needed for UART1 initialization to work
+	// Bootblock EC initialization is required for UART1 to work
 	sch555x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 }
diff --git a/src/mainboard/dell/optiplex_9020/cmos.default b/src/mainboard/dell/optiplex_9020/cmos.default
index a0acd7b6bb..9e02534c16 100644
--- a/src/mainboard/dell/optiplex_9020/cmos.default
+++ b/src/mainboard/dell/optiplex_9020/cmos.default
@@ -4,3 +4,4 @@ debug_level=Debug
 nmi=Disable
 power_on_after_fail=Disable
 iommu=Disable
+fan_full_speed=Disable
diff --git a/src/mainboard/dell/optiplex_9020/cmos.layout b/src/mainboard/dell/optiplex_9020/cmos.layout
index 72ff9c4bee..4a1496a878 100644
--- a/src/mainboard/dell/optiplex_9020/cmos.layout
+++ b/src/mainboard/dell/optiplex_9020/cmos.layout
@@ -22,7 +22,10 @@ entries
 409	2	e	5	power_on_after_fail
 
 # turn iommu on or off
-412	1	e	6	iommu
+411	1	e	6	iommu
+
+# coreboot config options: EC
+412	1	e	1	fan_full_speed
 
 # coreboot config options: check sums
 984	16	h	0	check_sum
diff --git a/src/mainboard/dell/optiplex_9020/mainboard.c b/src/mainboard/dell/optiplex_9020/mainboard.c
index c834fea5d3..0b7829c736 100644
--- a/src/mainboard/dell/optiplex_9020/mainboard.c
+++ b/src/mainboard/dell/optiplex_9020/mainboard.c
@@ -1,7 +1,12 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
+#include <bootstate.h>
+#include <cpu/x86/msr.h>
 #include <device/device.h>
 #include <drivers/intel/gma/int15.h>
+#include <option.h>
+#include <southbridge/intel/common/gpio.h>
+#include "sch5555_ec.h"
 
 static void mainboard_enable(struct device *dev)
 {
@@ -13,3 +18,385 @@ static void mainboard_enable(struct device *dev)
 struct chip_operations mainboard_ops = {
 	.enable_dev = mainboard_enable,
 };
+
+#define HWM_TAB_ADD_TEMP_TARGET	1
+#define HWM_TAB_PKG_POWER_ANY	0xffff
+#define CHASSIS_TYPE_UNKNOWN	0xff
+
+struct hwm_tab_entry {
+	uint16_t addr;
+	uint8_t val;
+	uint8_t flags;
+	uint16_t pkg_power;
+};
+
+struct hwm_tab_entry HWM_TAB3[] = {
+	{ 0x005, 0x33, 0, 0xffff },
+	{ 0x018, 0x2f, 0, 0xffff },
+	{ 0x019, 0x2f, 0, 0xffff },
+	{ 0x01a, 0x2f, 0, 0xffff },
+	{ 0x080, 0x00, 0, 0xffff },
+	{ 0x081, 0x00, 0, 0xffff },
+	{ 0x083, 0xbb, 0, 0xffff },
+	{ 0x085, 0x8a, 0, 0x0010 },
+	{ 0x086, 0x4c, 0, 0x0010 },
+	{ 0x08a, 0x66, 0, 0x0010 },
+	{ 0x08b, 0x5b, 0, 0x0010 },
+	{ 0x090, 0x65, 0, 0xffff },
+	{ 0x091, 0x70, 0, 0xffff },
+	{ 0x092, 0x86, 0, 0xffff },
+	{ 0x096, 0xa4, 0, 0xffff },
+	{ 0x097, 0xa4, 0, 0xffff },
+	{ 0x098, 0xa4, 0, 0xffff },
+	{ 0x09b, 0xa4, 0, 0xffff },
+	{ 0x0a0, 0x0e, 0, 0xffff },
+	{ 0x0a1, 0x0e, 0, 0xffff },
+	{ 0x0ae, 0x7c, 0, 0xffff },
+	{ 0x0af, 0x86, 0, 0xffff },
+	{ 0x0b0, 0x9a, 0, 0xffff },
+	{ 0x0b3, 0x9a, 0, 0xffff },
+	{ 0x0b6, 0x08, 0, 0xffff },
+	{ 0x0b7, 0x08, 0, 0xffff },
+	{ 0x0ea, 0x64, 0, 0x0020 },
+	{ 0x0ea, 0x5c, 0, 0x0010 },
+	{ 0x0ef, 0xff, 0, 0xffff },
+	{ 0x0f8, 0x15, 0, 0xffff },
+	{ 0x0f9, 0x00, 0, 0xffff },
+	{ 0x0f0, 0x30, 0, 0xffff },
+	{ 0x0fd, 0x01, 0, 0xffff },
+	{ 0x1a1, 0x00, 0, 0xffff },
+	{ 0x1a2, 0x00, 0, 0xffff },
+	{ 0x1b1, 0x08, 0, 0xffff },
+	{ 0x1be, 0x99, 0, 0xffff },
+	{ 0x280, 0xa0, 0, 0x0010 },
+	{ 0x281, 0x0f, 0, 0x0010 },
+	{ 0x282, 0x03, 0, 0xffff },
+	{ 0x283, 0x0a, 0, 0xffff },
+	{ 0x284, 0x80, 0, 0xffff },
+	{ 0x285, 0x03, 0, 0xffff },
+	{ 0x288, 0x68, 0, 0x0010 },
+	{ 0x289, 0x10, 0, 0x0010 },
+	{ 0x28a, 0x03, 0, 0xffff },
+	{ 0x28b, 0x0a, 0, 0xffff },
+	{ 0x28c, 0x80, 0, 0xffff },
+	{ 0x28d, 0x03, 0, 0xffff },
+};
+
+struct hwm_tab_entry HWM_TAB4[] = {
+	{ 0x005, 0x33, 0, 0xffff },
+	{ 0x018, 0x2f, 0, 0xffff },
+	{ 0x019, 0x2f, 0, 0xffff },
+	{ 0x01a, 0x2f, 0, 0xffff },
+	{ 0x080, 0x00, 0, 0xffff },
+	{ 0x081, 0x00, 0, 0xffff },
+	{ 0x083, 0xbb, 0, 0xffff },
+	{ 0x085, 0x99, 0, 0x0020 },
+	{ 0x085, 0xad, 0, 0x0010 },
+	{ 0x086, 0x1c, 0, 0xffff },
+	{ 0x08a, 0x39, 0, 0x0020 },
+	{ 0x08a, 0x41, 0, 0x0010 },
+	{ 0x08b, 0x76, 0, 0x0020 },
+	{ 0x08b, 0x8b, 0, 0x0010 },
+	{ 0x090, 0x5e, 0, 0xffff },
+	{ 0x091, 0x5e, 0, 0xffff },
+	{ 0x092, 0x86, 0, 0xffff },
+	{ 0x096, 0xa4, 0, 0xffff },
+	{ 0x097, 0xa4, 0, 0xffff },
+	{ 0x098, 0xa4, 0, 0xffff },
+	{ 0x09b, 0xa4, 0, 0xffff },
+	{ 0x0a0, 0x0a, 0, 0xffff },
+	{ 0x0a1, 0x0a, 0, 0xffff },
+	{ 0x0ae, 0x7c, 0, 0xffff },
+	{ 0x0af, 0x7c, 0, 0xffff },
+	{ 0x0b0, 0x9a, 0, 0xffff },
+	{ 0x0b3, 0x7c, 0, 0xffff },
+	{ 0x0b6, 0x08, 0, 0xffff },
+	{ 0x0b7, 0x08, 0, 0xffff },
+	{ 0x0ea, 0x64, 0, 0x0020 },
+	{ 0x0ea, 0x5c, 0, 0x0010 },
+	{ 0x0ef, 0xff, 0, 0xffff },
+	{ 0x0f8, 0x15, 0, 0xffff },
+	{ 0x0f9, 0x00, 0, 0xffff },
+	{ 0x0f0, 0x30, 0, 0xffff },
+	{ 0x0fd, 0x01, 0, 0xffff },
+	{ 0x1a1, 0x00, 0, 0xffff },
+	{ 0x1a2, 0x00, 0, 0xffff },
+	{ 0x1b1, 0x08, 0, 0xffff },
+	{ 0x1be, 0x90, 0, 0xffff },
+	{ 0x280, 0x94, 0, 0x0020 },
+	{ 0x281, 0x11, 0, 0x0020 },
+	{ 0x280, 0x94, 0, 0x0010 },
+	{ 0x281, 0x11, 0, 0x0010 },
+	{ 0x282, 0x03, 0, 0xffff },
+	{ 0x283, 0x0a, 0, 0xffff },
+	{ 0x284, 0x80, 0, 0xffff },
+	{ 0x285, 0x03, 0, 0xffff },
+	{ 0x288, 0x28, 0, 0x0020 },
+	{ 0x289, 0x0a, 0, 0x0020 },
+	{ 0x288, 0x28, 0, 0x0010 },
+	{ 0x289, 0x0a, 0, 0x0010 },
+	{ 0x28a, 0x03, 0, 0xffff },
+	{ 0x28b, 0x0a, 0, 0xffff },
+	{ 0x28c, 0x80, 0, 0xffff },
+	{ 0x28d, 0x03, 0, 0xffff },
+};
+
+struct hwm_tab_entry HWM_TAB5[] = {
+	{ 0x005, 0x33, 0, 0xffff },
+	{ 0x018, 0x2f, 0, 0xffff },
+	{ 0x019, 0x2f, 0, 0xffff },
+	{ 0x01a, 0x2f, 0, 0xffff },
+	{ 0x080, 0x00, 0, 0xffff },
+	{ 0x081, 0x00, 0, 0xffff },
+	{ 0x083, 0xbb, 0, 0xffff },
+	{ 0x085, 0x66, 0, 0x0020 },
+	{ 0x085, 0x5d, 0, 0x0010 },
+	{ 0x086, 0x1c, 0, 0xffff },
+	{ 0x08a, 0x39, 0, 0x0020 },
+	{ 0x08a, 0x41, 0, 0x0010 },
+	{ 0x08b, 0x76, 0, 0x0020 },
+	{ 0x08b, 0x80, 0, 0x0010 },
+	{ 0x090, 0x5d, 0, 0x0020 },
+	{ 0x090, 0x5e, 0, 0x0010 },
+	{ 0x091, 0x5e, 0, 0xffff },
+	{ 0x092, 0x86, 0, 0xffff },
+	{ 0x096, 0xa4, 0, 0xffff },
+	{ 0x097, 0xa4, 0, 0xffff },
+	{ 0x098, 0xa3, 0, 0x0020 },
+	{ 0x098, 0xa4, 0, 0x0010 },
+	{ 0x09b, 0xa4, 0, 0xffff },
+	{ 0x0a0, 0x08, 0, 0xffff },
+	{ 0x0a1, 0x0a, 0, 0xffff },
+	{ 0x0ae, 0x7c, 0, 0xffff },
+	{ 0x0af, 0x7c, 0, 0xffff },
+	{ 0x0b0, 0x9a, 0, 0xffff },
+	{ 0x0b3, 0x7c, 0, 0xffff },
+	{ 0x0b6, 0x08, 0, 0xffff },
+	{ 0x0b7, 0x08, 0, 0xffff },
+	{ 0x0ea, 0x64, 0, 0x0020 },
+	{ 0x0ea, 0x5c, 0, 0x0010 },
+	{ 0x0ef, 0xff, 0, 0xffff },
+	{ 0x0f8, 0x15, 0, 0xffff },
+	{ 0x0f9, 0x00, 0, 0xffff },
+	{ 0x0f0, 0x30, 0, 0xffff },
+	{ 0x0fd, 0x01, 0, 0xffff },
+	{ 0x1a1, 0x00, 0, 0xffff },
+	{ 0x1a2, 0x00, 0, 0xffff },
+	{ 0x1b1, 0x08, 0, 0xffff },
+	{ 0x1be, 0x98, 0, 0x0020 },
+	{ 0x1be, 0x90, 0, 0x0010 },
+	{ 0x280, 0x94, 0, 0x0020 },
+	{ 0x281, 0x11, 0, 0x0020 },
+	{ 0x280, 0x94, 0, 0x0010 },
+	{ 0x281, 0x11, 0, 0x0010 },
+	{ 0x282, 0x03, 0, 0xffff },
+	{ 0x283, 0x0a, 0, 0xffff },
+	{ 0x284, 0x80, 0, 0xffff },
+	{ 0x285, 0x03, 0, 0xffff },
+	{ 0x288, 0x28, 0, 0x0020 },
+	{ 0x289, 0x0a, 0, 0x0020 },
+	{ 0x288, 0x28, 0, 0x0010 },
+	{ 0x289, 0x0a, 0, 0x0010 },
+	{ 0x28a, 0x03, 0, 0xffff },
+	{ 0x28b, 0x0a, 0, 0xffff },
+	{ 0x28c, 0x80, 0, 0xffff },
+	{ 0x28d, 0x03, 0, 0xffff },
+};
+
+struct hwm_tab_entry HWM_TAB6[] = {
+	{ 0x005, 0x33, 0, 0xffff },
+	{ 0x018, 0x2f, 0, 0xffff },
+	{ 0x019, 0x2f, 0, 0xffff },
+	{ 0x01a, 0x2f, 0, 0xffff },
+	{ 0x080, 0x00, 0, 0xffff },
+	{ 0x081, 0x00, 0, 0xffff },
+	{ 0x083, 0xbb, 0, 0xffff },
+	{ 0x085, 0x98, 0, 0xffff },
+	{ 0x086, 0x3c, 0, 0xffff },
+	{ 0x08a, 0x39, 0, 0x0020 },
+	{ 0x08a, 0x3d, 0, 0x0010 },
+	{ 0x08b, 0x44, 0, 0x0020 },
+	{ 0x08b, 0x51, 0, 0x0010 },
+	{ 0x090, 0x61, 0, 0xffff },
+	{ 0x091, 0x6d, 0, 0xffff },
+	{ 0x092, 0x86, 0, 0xffff },
+	{ 0x096, 0xa4, 0, 0xffff },
+	{ 0x097, 0xa4, 0, 0xffff },
+	{ 0x098, 0x9f, 0, 0x0020 },
+	{ 0x098, 0xa4, 0, 0x0010 },
+	{ 0x09b, 0xa4, 0, 0xffff },
+	{ 0x0a0, 0x0e, 0, 0xffff },
+	{ 0x0a1, 0x0e, 0, 0xffff },
+	{ 0x0ae, 0x7c, 0, 0xffff },
+	{ 0x0af, 0x7c, 0, 0xffff },
+	{ 0x0b0, 0x9b, 0, 0x0020 },
+	{ 0x0b0, 0x98, 0, 0x0010 },
+	{ 0x0b3, 0x9a, 0, 0xffff },
+	{ 0x0b6, 0x08, 0, 0xffff },
+	{ 0x0b7, 0x08, 0, 0xffff },
+	{ 0x0ea, 0x64, 0, 0x0020 },
+	{ 0x0ea, 0x5c, 0, 0x0010 },
+	{ 0x0ef, 0xff, 0, 0xffff },
+	{ 0x0f8, 0x15, 0, 0xffff },
+	{ 0x0f9, 0x00, 0, 0xffff },
+	{ 0x0f0, 0x30, 0, 0xffff },
+	{ 0x0fd, 0x01, 0, 0xffff },
+	{ 0x1a1, 0x00, 0, 0xffff },
+	{ 0x1a2, 0x00, 0, 0xffff },
+	{ 0x1b1, 0x08, 0, 0xffff },
+	{ 0x1be, 0x9a, 0, 0x0020 },
+	{ 0x1be, 0x96, 0, 0x0010 },
+	{ 0x280, 0x94, 0, 0x0020 },
+	{ 0x281, 0x11, 0, 0x0020 },
+	{ 0x280, 0x94, 0, 0x0010 },
+	{ 0x281, 0x11, 0, 0x0010 },
+	{ 0x282, 0x03, 0, 0xffff },
+	{ 0x283, 0x0a, 0, 0xffff },
+	{ 0x284, 0x80, 0, 0xffff },
+	{ 0x285, 0x03, 0, 0xffff },
+	{ 0x288, 0x94, 0, 0x0020 },
+	{ 0x289, 0x11, 0, 0x0020 },
+	{ 0x288, 0x94, 0, 0x0010 },
+	{ 0x289, 0x11, 0, 0x0010 },
+	{ 0x28a, 0x03, 0, 0xffff },
+	{ 0x28b, 0x0a, 0, 0xffff },
+	{ 0x28c, 0x80, 0, 0xffff },
+	{ 0x28d, 0x03, 0, 0xffff },
+};
+
+static uint8_t get_chassis_type(void)
+{
+	uint8_t gpio_chassis_type;
+
+	// Read chassis type from GPIO
+	gpio_chassis_type = get_gpio(70) << 3 | get_gpio(38) << 2 |
+			    get_gpio(17) << 1 | get_gpio(1);
+
+	printk(BIOS_DEBUG, "GPIO chassis type = %#x\n", gpio_chassis_type);
+
+	// Turn it into internal chassis index
+	switch (gpio_chassis_type) {
+	case 0x08:
+	case 0x0a:
+		return 4;
+	case 0x0b:
+		return 3;
+	case 0x0c:
+		return 5;
+	case 0x0d: // SFF
+	case 0x0e:
+	case 0x0f:
+		return 6;
+	default:
+		return CHASSIS_TYPE_UNKNOWN;
+	}
+
+}
+
+static uint8_t get_temp_target(void)
+{
+	uint8_t val = rdmsr(0x1a2).lo >> 8 & 0xff;
+	if (!val)
+		val = 20;
+	return 0x95 - val;
+}
+
+static uint16_t get_pkg_power(void)
+{
+	uint8_t rapl_power_unit = rdmsr(0x606).lo & 0xf;
+	if (rapl_power_unit)
+		rapl_power_unit = 2 << (rapl_power_unit - 1);
+	uint16_t pkg_power_info = rdmsr(0x614).lo & 0x7fff;
+	if (pkg_power_info / rapl_power_unit > 0x41)
+		return 32;
+	else
+		return 16;
+}
+
+static void apply_hwm_tab(struct hwm_tab_entry *arr, size_t size)
+{
+	uint8_t temp_target = get_temp_target();
+	uint16_t pkg_power = get_pkg_power();
+
+	printk(BIOS_DEBUG, "Temp target = %#x\n", temp_target);
+	printk(BIOS_DEBUG, "Package power = %#x\n", pkg_power);
+
+	for (size_t i = 0; i < size; ++i) {
+		// Skip entry if it doesn't apply for this package power
+		if (arr[i].pkg_power != pkg_power &&
+		    arr[i].pkg_power != HWM_TAB_PKG_POWER_ANY)
+			continue;
+
+		uint8_t val = arr[i].val;
+
+		// Add temp target to value if requested (current tables never do)
+		if (arr[i].flags & HWM_TAB_ADD_TEMP_TARGET)
+			val += temp_target;
+
+		// Perform write
+		ec_write(1, arr[i].addr, val);
+
+	}
+}
+
+static void sch5555_ec_hwm_init(void *arg)
+{
+	uint8_t chassis_type, saved_2fc;
+
+	printk(BIOS_DEBUG, "OptiPlex 9020 late HWM init\n");
+
+	saved_2fc = ec_read(1, 0x2fc);
+	ec_write(1, 0x2fc, 0xa0);
+	ec_write(1, 0x2fd, 0x32);
+
+	chassis_type = get_chassis_type();
+
+	if (chassis_type != CHASSIS_TYPE_UNKNOWN) {
+		printk(BIOS_DEBUG, "Chassis type = %#x\n", chassis_type);
+	} else {
+		printk(BIOS_DEBUG, "WARNING: Unknown chassis type\n");
+	}
+
+	// Apply HWM table based on chassis type
+	switch (chassis_type) {
+	case 3:
+		apply_hwm_tab(HWM_TAB3, ARRAY_SIZE(HWM_TAB3));
+		break;
+	case 4:
+		apply_hwm_tab(HWM_TAB4, ARRAY_SIZE(HWM_TAB4));
+		break;
+	case 5:
+		apply_hwm_tab(HWM_TAB5, ARRAY_SIZE(HWM_TAB5));
+		break;
+	case 6:
+		apply_hwm_tab(HWM_TAB6, ARRAY_SIZE(HWM_TAB6));
+		break;
+	}
+
+	// NOTE: vendor firmware applies these when "max core address" > 2
+	// i think this is always the case
+	ec_write(1, 0x9e, 0x30);
+	ec_write(1, 0xeb, ec_read(1, 0xea));
+
+	ec_write(1, 0x2fc, saved_2fc);
+
+	// Apply full speed fan config if requested or if the chassis type is unknown
+	if (chassis_type == CHASSIS_TYPE_UNKNOWN || get_uint_option("fan_full_speed", 0)) {
+		printk(BIOS_DEBUG, "Setting full fan speed\n");
+		ec_write(1, 0x80, 0x60 | ec_read(1, 0x80));
+		ec_write(1, 0x81, 0x60 | ec_read(1, 0x81));
+	}
+
+	ec_read(1, 0xb8);
+
+	if ((chassis_type == 4 || chassis_type == 5) && ec_read(1, 0x26) == 0) {
+		ec_write(1, 0xa0, ec_read(1, 0xa0) & 0xfb);
+		ec_write(1, 0xa1, ec_read(1, 0xa1) & 0xfb);
+		ec_write(1, 0xa2, ec_read(1, 0xa2) & 0xfb);
+		ec_write(1, 0x8a, 0x99);
+		ec_write(1, 0x8b, 0x47);
+		ec_write(1, 0x8c, 0x91);
+	}
+}
+
+BOOT_STATE_INIT_ENTRY(BS_POST_DEVICE, BS_ON_EXIT, sch5555_ec_hwm_init, NULL);
diff --git a/src/mainboard/dell/optiplex_9020/sch5555_ec.c b/src/mainboard/dell/optiplex_9020/sch5555_ec.c
new file mode 100644
index 0000000000..a1067ac063
--- /dev/null
+++ b/src/mainboard/dell/optiplex_9020/sch5555_ec.c
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <arch/io.h>
+#include <device/pnp_ops.h>
+#include <superio/smsc/sch555x/sch555x.h>
+#include "sch5555_ec.h"
+
+uint8_t ec_read(uint8_t addr1, uint16_t addr2)
+{
+	// clear ec-to-host mailbox
+	uint8_t tmp = inb(SCH555x_EMI_IOBASE + 1);
+	outb(tmp, SCH555x_EMI_IOBASE + 1);
+
+	// send address
+	outw(0 | 0x8001, SCH555x_EMI_IOBASE + 2);
+	outw((addr1 * 2) | 0x100, SCH555x_EMI_IOBASE + 4);
+
+	outw(4 | 0x8002, SCH555x_EMI_IOBASE + 2);
+	outl(addr2 << 16, SCH555x_EMI_IOBASE + 4);
+
+	// send message to ec
+	outb(1, SCH555x_EMI_IOBASE);
+
+	// wait for ack
+	for (size_t retry = 0; retry < 0xfff; ++retry)
+		if (inb(SCH555x_EMI_IOBASE + 1) & 1)
+			break;
+
+	// read result
+	outw(4 | 0x8000, SCH555x_EMI_IOBASE + 2);
+	return inb(SCH555x_EMI_IOBASE + 4);
+}
+
+void ec_write(uint8_t addr1, uint16_t addr2, uint8_t val)
+{
+	// clear ec-to-host mailbox
+	uint8_t tmp = inb(SCH555x_EMI_IOBASE + 1);
+	outb(tmp, SCH555x_EMI_IOBASE + 1);
+
+	// send address and value
+	outw(0 | 0x8001, SCH555x_EMI_IOBASE + 2);
+	outw((addr1 * 2) | 0x101, SCH555x_EMI_IOBASE + 4);
+
+	outw(4 | 0x8002, SCH555x_EMI_IOBASE + 2);
+	outl(val | (addr2 << 16), SCH555x_EMI_IOBASE + 4);
+
+	// send message to ec
+	outb(1, SCH555x_EMI_IOBASE);
+
+	// wait for ack
+	for (size_t retry = 0; retry < 0xfff; ++retry)
+		if (inb(SCH555x_EMI_IOBASE + 1) & 1)
+			break;
+}
diff --git a/src/mainboard/dell/optiplex_9020/sch5555_ec.h b/src/mainboard/dell/optiplex_9020/sch5555_ec.h
new file mode 100644
index 0000000000..7e399e8e74
--- /dev/null
+++ b/src/mainboard/dell/optiplex_9020/sch5555_ec.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SCH5555_EC_H__
+#define __SCH5555_EC_H__
+
+uint8_t ec_read(uint8_t addr1, uint16_t addr2);
+
+void ec_write(uint8_t addr1, uint16_t addr2, uint8_t val);
+
+#endif
-- 
2.39.2