path: root/config/coreboot/haswell/patches/0013-haswell-NRI-Add-read-MPR-training.patch

From e263f0d2e9d6d016d603342651da261bbcb6af1f Mon Sep 17 00:00:00 2001
From: Angel Pons <th3fanbus@gmail.com>
Date: Sun, 8 May 2022 11:35:49 +0200
Subject: [PATCH 13/20] haswell NRI: Add read MPR training

Implement read training using DDR3 MPR (Multi-Purpose Register).

Change-Id: Id17cb2c4c399ac9bcc937b595b58f863c152461b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
---
 .../intel/haswell/native_raminit/Makefile.mk  |   1 +
 .../haswell/native_raminit/raminit_main.c     |   1 +
 .../haswell/native_raminit/raminit_native.h   |   4 +
 .../haswell/native_raminit/train_read_mpr.c   | 241 ++++++++++++++++++
 .../intel/haswell/registers/mchbar.h          |   2 +-
 5 files changed, 248 insertions(+), 1 deletion(-)
 create mode 100644 src/northbridge/intel/haswell/native_raminit/train_read_mpr.c

diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
index e2fbfb4211..c442be0728 100644
--- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
@@ -16,4 +16,5 @@ romstage-y += setup_wdb.c
 romstage-y += spd_bitmunching.c
 romstage-y += testing_io.c
 romstage-y += timings_refresh.c
+romstage-y += train_read_mpr.c
 romstage-y += train_receive_enable.c
diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
index 7d444659c3..264d1468f5 100644
--- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
@@ -61,6 +61,7 @@ static const struct task_entry cold_boot[] = {
 	{ do_jedec_init,                                          true, "JEDECINIT",  },
 	{ pre_training,                                           true, "PRETRAIN",   },
 	{ train_receive_enable,                                   true, "RCVET",      },
+	{ train_read_mpr,                                         true, "RDMPRT",     },
 };
 
 /* Return a generic stepping value to make stepping checks simpler */
diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
index 5242b16f28..49e9214656 100644
--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
@@ -27,6 +27,8 @@
 /* Always use 12 legs for emphasis (not trained) */
 #define TXEQFULLDRV		(3 << 4)
 
+#define LOOPCOUNT_INFINITE	0xff
+
 /* DDR3 mode register bits */
 #define MR0_DLL_RESET		BIT(8)
 
@@ -212,6 +214,7 @@ enum raminit_status {
 	RAMINIT_STATUS_POLL_TIMEOUT,
 	RAMINIT_STATUS_REUT_ERROR,
 	RAMINIT_STATUS_RCVEN_FAILURE,
+	RAMINIT_STATUS_RMPR_FAILURE,
 	RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/
 };
 
@@ -433,6 +436,7 @@ enum raminit_status configure_mc(struct sysinfo *ctrl);
 enum raminit_status configure_memory_map(struct sysinfo *ctrl);
 enum raminit_status do_jedec_init(struct sysinfo *ctrl);
 enum raminit_status train_receive_enable(struct sysinfo *ctrl);
+enum raminit_status train_read_mpr(struct sysinfo *ctrl);
 
 void configure_timings(struct sysinfo *ctrl);
 void configure_refresh(struct sysinfo *ctrl);
diff --git a/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
new file mode 100644
index 0000000000..ade1e36148
--- /dev/null
+++ b/src/northbridge/intel/haswell/native_raminit/train_read_mpr.c
@@ -0,0 +1,241 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <commonlib/bsd/clamp.h>
+#include <console/console.h>
+#include <delay.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <types.h>
+
+#include "raminit_native.h"
+#include "ranges.h"
+
+#define RMPR_START	(-32)
+#define RMPR_STOP	(32)
+#define RMPR_STEP	1
+
+#define RMPR_MIN_WIDTH	12
+
+#define RMPR_PLOT	RAM_DEBUG
+
+/*
+ * Clear rx_training_mode. For LPDDR, we first need to disable odt_samp_extend_en,
+ * then disable rx_training_mode, and finally re-enable odt_samp_extend_en.
+ */
+static void clear_rx_training_mode(struct sysinfo *ctrl, const uint8_t channel)
+{
+	for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+		mchbar_write32(DQ_CONTROL_2(channel, byte), ctrl->dq_control_2[channel][byte]);
+
+	if (ctrl->lpddr) {
+		union ddr_data_control_0_reg data_control_0 = {
+			.raw = mchbar_read32(DDR_DATA_ch_CONTROL_0(channel)),
+		};
+		data_control_0.odt_samp_extend_en = 0;
+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
+		tick_delay(1);
+		data_control_0.rx_training_mode = 0;
+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
+		tick_delay(1);
+	}
+	mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
+}
+
+static void set_rxdqs_edges_to_midpoint(struct sysinfo *ctrl)
+{
+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+		if (!does_ch_exist(ctrl, channel))
+			continue;
+
+		for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
+			if (!rank_in_ch(ctrl, rank, channel))
+				continue;
+
+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+				update_rxt(ctrl, channel, rank, byte, RXT_RXDQS_BOTH, 32);
+		}
+	}
+}
+
+static void enter_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank)
+{
+	/* Program MR3 and mask RAS/WE to prevent scheduler from issuing non-read commands */
+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+		if (!rank_in_ch(ctrl, rank, channel))
+			continue;
+
+		if (!ctrl->lpddr)
+			reut_issue_mrs(ctrl, channel, BIT(rank), 3, 1 << 2);
+
+		union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = {
+			.raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)),
+		};
+		reut_misc_odt_ctrl.mpr_train_ddr_on = 1;
+		mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw);
+	}
+}
+
+static void leave_mpr_train_ddr_mode(struct sysinfo *ctrl, const uint8_t rank)
+{
+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+		if (!rank_in_ch(ctrl, rank, channel))
+			continue;
+
+		/*
+		 * The mpr_train_ddr_on bit will force a special command.
+		 * Therefore, clear it before issuing the MRS command.
+		 */
+		union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = {
+			.raw = mchbar_read32(REUT_ch_MISC_ODT_CTRL(channel)),
+		};
+		reut_misc_odt_ctrl.mpr_train_ddr_on = 0;
+		mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw);
+		if (!ctrl->lpddr)
+			reut_issue_mrs(ctrl, channel, BIT(rank), 3, 0 << 2);
+	}
+}
+
+enum raminit_status train_read_mpr(struct sysinfo *ctrl)
+{
+	set_rxdqs_edges_to_midpoint(ctrl);
+	clear_data_offset_train_all(ctrl);
+	setup_io_test_mpr(ctrl, ctrl->chanmap, LOOPCOUNT_INFINITE, NSOE);
+	enum raminit_status status = RAMINIT_STATUS_SUCCESS;
+	for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
+		if (!does_rank_exist(ctrl, rank))
+			continue;
+
+		printk(BIOS_DEBUG, "Rank %u\n", rank);
+		printk(RMPR_PLOT, "Channel");
+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+			if (!rank_in_ch(ctrl, rank, channel))
+				continue;
+
+			printk(RMPR_PLOT, "\t%u\t\t", channel);
+		}
+		printk(RMPR_PLOT, "\nByte");
+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+			if (!rank_in_ch(ctrl, rank, channel))
+				continue;
+
+			printk(RMPR_PLOT, "\t");
+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+				printk(RMPR_PLOT, "%u ", byte);
+		}
+		enter_mpr_train_ddr_mode(ctrl, rank);
+		struct linear_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 };
+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++)
+			select_reut_ranks(ctrl, channel, BIT(rank));
+
+		printk(RMPR_PLOT, "\nDqsDelay\n");
+		int8_t dqs_delay;
+		for (dqs_delay = RMPR_START; dqs_delay < RMPR_STOP; dqs_delay += RMPR_STEP) {
+			printk(RMPR_PLOT, "% 5d", dqs_delay);
+			const enum regfile_mode regfile = REG_FILE_USE_START;
+			/* Looks like MRC uses rank 0 here, but it feels wrong */
+			change_1d_margin_multicast(ctrl, RdT, dqs_delay, rank, false, regfile);
+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+				if (!rank_in_ch(ctrl, rank, channel))
+					continue;
+
+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
+					union ddr_data_control_2_reg data_control_2 = {
+						.raw = ctrl->dq_control_2[channel][byte],
+					};
+					data_control_2.force_bias_on = 1;
+					data_control_2.force_rx_on   = 1;
+					data_control_2.leaker_comp   = 0;
+					mchbar_write32(DQ_CONTROL_2(channel, byte),
+						data_control_2.raw);
+				}
+				union ddr_data_control_0_reg data_control_0 = {
+					.raw = ctrl->dq_control_0[channel],
+				};
+				data_control_0.rx_training_mode   = 1;
+				data_control_0.force_odt_on       = !ctrl->lpddr;
+				data_control_0.en_read_preamble   = 0;
+				data_control_0.odt_samp_extend_en = ctrl->lpddr;
+				const uint32_t reg_offset = DDR_DATA_ch_CONTROL_0(channel);
+				mchbar_write32(reg_offset, data_control_0.raw);
+			}
+			run_mpr_io_test(false);
+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+				if (!rank_in_ch(ctrl, rank, channel))
+					continue;
+
+				printk(RMPR_PLOT, "\t");
+				for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
+					uint32_t fb = get_data_train_feedback(channel, byte);
+					const bool pass = fb == 1;
+					printk(RMPR_PLOT, pass ? ". " : "# ");
+					linear_record_pass(
+						&region_data[channel][byte],
+						pass,
+						dqs_delay,
+						RMPR_START,
+						RMPR_STEP);
+				}
+			}
+			printk(RMPR_PLOT, "\n");
+			for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+				if (!rank_in_ch(ctrl, rank, channel))
+					continue;
+
+				clear_rx_training_mode(ctrl, channel);
+			}
+			io_reset();
+		}
+		printk(RMPR_PLOT, "\n");
+		leave_mpr_train_ddr_mode(ctrl, rank);
+		clear_data_offset_train_all(ctrl);
+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+			if (!rank_in_ch(ctrl, rank, channel))
+				continue;
+
+			printk(BIOS_DEBUG, "C%u.R%u: \tLeft\tRight\tWidth\tCenter\tRxDqsPN\n",
+				channel, rank);
+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
+				struct linear_train_data *data = &region_data[channel][byte];
+				const int32_t lwidth = range_width(data->largest);
+				if (lwidth <= RMPR_MIN_WIDTH) {
+					printk(BIOS_ERR,
+						"Bad eye (lwidth %d <= min %d) for byte %u\n",
+						lwidth, RMPR_MIN_WIDTH, byte);
+					status = RAMINIT_STATUS_RMPR_FAILURE;
+				}
+				/*
+				 * The MPR center may not be ideal on certain platforms for
+				 * unknown reasons. If so, adjust it with a magical number.
+				 * For Haswell, the magical number is zero. Hell knows why.
+				 */
+				const int32_t center = range_center(data->largest);
+				ctrl->rxdqsp[channel][rank][byte] = center - RMPR_START;
+				ctrl->rxdqsn[channel][rank][byte] = center - RMPR_START;
+				printk(BIOS_DEBUG, "  B%u: \t%d\t%d\t%d\t%d\t%u\n", byte,
+					data->largest.start, data->largest.end, lwidth,
+					center, ctrl->rxdqsp[channel][rank][byte]);
+			}
+			printk(BIOS_DEBUG, "\n");
+		}
+	}
+
+	/*
+	 * Now program the DQS center values on populated ranks. data is taken from
+	 * the host struct. We need to do it after all ranks are trained, because we
+	 * need to keep the same DQS value on all ranks during the training procedure.
+	 */
+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
+		if (!does_ch_exist(ctrl, channel))
+			continue;
+
+		for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
+			if (!rank_in_ch(ctrl, rank, channel))
+				continue;
+
+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
+				update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
+		}
+	}
+	change_1d_margin_multicast(ctrl, RdT, 0, 0, false, REG_FILE_USE_CURRENT);
+	io_reset();
+	return status;
+}
diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
index 0acafbc826..6a31d3a32c 100644
--- a/src/northbridge/intel/haswell/registers/mchbar.h
+++ b/src/northbridge/intel/haswell/registers/mchbar.h
@@ -122,7 +122,7 @@
 #define REUT_ch_ERR_DATA_MASK(ch)		_MCMAIN_C(0x40d8, ch)
 
 #define REUT_ch_MISC_CKE_CTRL(ch)		_MCMAIN_C(0x4190, ch)
-
+#define REUT_ch_MISC_ODT_CTRL(ch)		_MCMAIN_C(0x4194, ch)
 #define REUT_ch_MISC_PAT_CADB_CTRL(ch)		_MCMAIN_C(0x4198, ch)
 #define REUT_ch_PAT_CADB_MRS(ch)		_MCMAIN_C(0x419c, ch)
 #define REUT_ch_PAT_CADB_MUX_CTRL(ch)		_MCMAIN_C(0x41a0, ch)
-- 
2.39.2