summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-01dell-flash-unlock: Update README for BSDNicholas Chin
Add FreeBSD to the README as it is now supported. Make a note about using gmake instead of make as the makefile currently uses GNU extensions to determine build flags based on the OS. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01dell_flash_unlock: Add support for FreeBSDNicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01dell_flash_unlock: Set iopl level back to 0 when doneNicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01dell_flash_unlock: Fix ec_set_fdo() signatureNicholas Chin
Set argument list as void. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01Fixed QEMU x86 target's SMBIOS informationslivio
2024-05-01Fixed QEMU x86 target's SMBIOS informationslivio
2024-05-01Fixed boot selection menulivio
2024-05-01correct dell latitude status for releaseLeah Rowe
it should be marked unstable, though these machines are basically reliable; they have certain missing features and quirky behaviour so it's important not to over-sell it mark it as unstable, on all of the dell latitudes Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01update release status for HP machinesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01set gru bob/kevin stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01set dell latitudes stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01mark i945 machines as stable for releaseLeah Rowe
the previous issue was tested, and can no longer be reproduced Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-29Implemented failsafe options at boot and inside menus for enabling/disabling ↵livio
serial, spkmodem and gfxterm
2024-04-29build/roms: simplified list handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28dell-flash-unlock: Remove unnecessary includes for NetBSDNicholas Chin
The pio.h header, although present on NetBSD, is not necessary, as it only declares x86 port IO inx()/outx() functions which are not actually implemented. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-04-28dell-flash-unlock: Remove memory clobber from inline assemblyNicholas Chin
The x86 port IO instructions do not access memory so it is not needed in the clobber list. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-04-28build/roms: if release, allow all non-broken romsLeah Rowe
this includes untested roms Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: always display warningsLeah Rowe
(even if status=stable) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: reduce indentation in skip_board()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: simplified status handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: simplified seagrub handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: support SeaGRUB *with menu enabled*Leah Rowe
This is useful on desktops, where you want GRUB to automatically start, but you still want access to the GRUB menu, in the case where you rely on SeaBIOS to execute the VGA ROM inside your graphics card. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28update/trees: simplified defconfig copyingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28option.sh: don't use nproc (not portable)Leah Rowe
export LBMK_THREADS=x where x is an integer. this is already supported for setting the number of build threads, but if not set it uses nproc. openbsd doesn't have nproc. default to 1 thread. now you MUST set threads. e.g. in linux do: export LBMK_THREADS=$(nproc) preliminary work is being done to make lbmk run on openbsd! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28eDP configs (x230/x220): don't releaseLeah Rowe
set to release="n" for now until the eDP targets are fixed. the regular non-eDP targets are stable, and will be released. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28fix target.cfg files on dell latitudesLeah Rowe
some latitudes still used the old style for variables in target.cfg, specifically arch="x86_64" - lbmk used to then check that on a big if/else and translate it to the correct target name for crossgcc, e.g. i386-elf, arm-eabi now it just puts the arch directly, in a new variable: xarch change arch="x86_64" to xarch="i386-elf" in these files. also remove a few obsolete variables. should build now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28use mirrorservice.org for iasl downloadsLeah Rowe
github is unreliable. i host these files myself. coreboot uses intel.com again now in the latest revisions, and intel broke it before. i'm going to start backing up the acpica releases onto my rsync server from now on, and keep patching coreboot to use my files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update/release: disable status checkingLeah Rowe
just to ensure that nothing goes wrong. we don't rely on the status variable for releases, because there is another variable, release, that target.cfg files declare, e.g. release="n" release="y" you can just omit the variable, because it defaults to y, so you only need declare it when it needs to be "n" Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27build/roms: tell the user how to ignore statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update macbook21/x60/t60 statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27allow disabling status checks during buildsLeah Rowe
export LBMK_STATUS=n if not set, the status checks and confirmation dialogs persist. if set to y they persist. if you set it to n, all checks are disabled, so e.g.: ./build roms all this would once again build all targets, regardless of status. this is if you want the old behaviour. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update 9020 sff/mt release statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update more board statuses before releaseLeah Rowe
what's left to properly test are pineview/x4x/i945 and some of the ivy/sandy elitebooks/hp workstations Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27Set status=unstable on dell latitudesLeah Rowe
also warn about issues, in a warn.txt file for each. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27declare ivy/sandy thinkpads stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27declare gm45 thinkpads stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27kcma-d8/kgpe-d16: mark as tested(unstable)Leah Rowe
raminit has never been fully reliable on this board, and so this board has never been stable. so, now that lbmk specifies such status per board, mark these boards as such. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26Merge pull request 'dell-flash-unlock: add NetBSD support' (#194) from ↵Leah Rowe
linear/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/194
2024-04-26build/roms: update help, pertaining to statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26build/roms: let "list" specify status typesLeah Rowe
for example: ./build roms list this will list every now, still. same behaviour. now see: ./build roms list stable this will list all stable roms ./build roms list untested this lists untested roms. but wait! ./build roms list untested broken unstable ./build roms list broken unstable yes. it works this way. now you can use lbmk to easily see what rom status are, during maintenance. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26erroneous returnLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26build/roms: report status when building imagesLeah Rowe
export LBMK_VERSION_TYPE=x x can be: stable, unstable in target.cfg files, specify: status=x x can be: stable, unstable, broken, untested if unset, lbmk defaults to "unknown" if LBMK_VERSION_TYPE is set, no confirmation is asked if the given target matches what's set (but what's set in that environmental variable can only be stable or unstable) if LBMK_RELEASE="y", no confirmation is asked, unless the target is something other than stable/unstable "unstable" means it works, but has a few non-breaking bugs, e.g. broken s3 on dell e6400 whereas, if raminit regularly fails or it is so absolutely unreliable as to be unusable, then the board should be declared "broken" untested means: it has not been tested With this change, it should now be easier to track whether a given board is tested, in preparation for releases. When working on trees/boards, status can be set for targets. Also: in the board directory, you can add a "warn.txt" file which will display a message. For example, if a board has a particular quirk to watch out for, write that there. The message will be printed during the build process, to stdout. If status is anything *other* than stable, or it is unstable but LBMK_VERSION_TYPE is not set to "unstable", and not building a release, a confirmation is passed. If the board is not specified as stable or unstable, during a release build, the build is skipped and the ROM is not provided in that release; this is in *addition* to release="n" or release="y" that can be set in target.cfg, which will skip the release build for that target if "n" Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26i945: switch boards to 20230625 coreboot revisionLeah Rowe
On T60 with Libreboot 20231106 and the GRUB payload, a user reported this error in GRUB when a battery was connected: "alloc magic is broken at 0x7b1aedf0: 0" This error disappears when a battery is not connected, or when using Libreboot 20230625. The issue has persisted through to LIbreboot 20240225 and after, and I believe the issue will be somewhere in coreboot, not in GRUB itself. For now, switch i945 laptops (X60, T60, Macbook2,1) back to the February 2023 coreboot revision used in Libreboot 20230625. A bisect can be done before the next Libreboot release, ETA May 2024, if time permits. Otherwise, this revert should solve the problem for now, at least so far as Libreboot is concerned. The following coreboot patches have been backported: commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94 Author: Bill Xie <persmule@hardenedlinux.org> Date: Sat Oct 7 01:32:51 2023 +0800 drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume Further patches from upstream: commit 432e92688eca0e85cbaebca3232f65936b305a98 Author: Bill Xie <persmule@hardenedlinux.org> Date: Fri Nov 3 12:34:01 2023 +0800 drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum These patches fixed S3 on GM45 machines, though it will be useful on the i945 machines aswell. The reason I'm doing it this way it is because I don't have a battery for my X60 or T60, and my T60 isn't in a very good state either, so I can't reproduce the error myself yet. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26exports variables from err.sh, not buildLeah Rowe
LC_COLLATE and LBMK_RELEASE are important variables. we want to make sure that these are seen by everything. since err.sh is included from all scripts, doing it there will accomplish just that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26GRUB: bump to today's latest revisionLeah Rowe
GRUB has not pushed many patches to master since the recent 2.12 release, but there are a number of interesting fixes. libreboot is doing a release soon. bump to latest grub revision. Some of the new patches in GRUB are interesting: XFS fixes: "fs/xfs: Handle non-continuous data blocks in directory extents" 68dd65cfdaad08b1f8ec01b84949b0bf88bc0d8c Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2254370 Apparently, XFS could not boot in some reports, though this was likely with BIOS or UEFI GRUB; no such reports were made to libreboot "gfxmenu/view: Resolve false grub_errno disrupting boot process" 39c927df66c7ca62d97905d1385054ac9ce67209 "util/grub-fstest: Add a new command zfs-bootfs" 28c4405208cfb6e2cea737f6cbaf17e631bac6cd The gnulib revision does not need to be updated at this time. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-269020 sff/mt: actually enable the TPM (by default)Leah Rowe
i added mkukri's patch but didn't enable it. this was intentional. this patch enables tpm by default, on all 9020 sff/mt targets. most users probably won't need it, but enabling it won't hurt. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-259020 sff/mt: add tpm enable patch from mate kukriLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-25lbmk: export TMPDIR from err.sh, not buildLeah Rowe
lbmk sets TMPDIR to /tmp, and then creates a tmpdir, then exports *that* as the value of TMPDIR. this unified TMPDIR location then contains all subsequent files and directories, when any script or program makes use of /tmp, via mktemp. at least, that's the theory! in practise, because it was only being properly exported from the main build scripts, subscripts that are then called were not exporting it, at least that is my assumption because in some cases, i found that the coreboot build system was leaving errant files behind outside of our own TMPDIR, and that build system did not seem to be setting TMPDIR itself; more debugging is needed. anyway: use the exact same logic, but do it from err.sh. since err.sh is included from every lbmk script, that means it will always be exported when running every single part of lbmk. this should reduce the chance that mktemp creates files and directories outside of our custom TMPDIR location. this is because in lbmk, we mitigate unhandled tmpdirs/files by unifying it in the manner described, then deleting the entire TMPDIR on exit from the main lbmk parent process (the main script that the user called from, which is always the "build" file). in lbmk, effort is made to clean up temporary files properly, without relying on this catch-all, but we can't rely on that. the catch-all should also be as robust as possible. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-25build/roms: add missing deletion of tmp fileLeah Rowe
the temporary rom per build was not being deleted after finishing the current target. this adds up in /tmp during large builds, when building for many targets. fix this! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-25hp820g2: allow building, but don't do release ROMsLeah Rowe
at present, the inject scripts compress refcode in a way that is not reproducible, so there's no way to verify that the firmware is correct, via checksum verification, when injecting vendor code on release images the lack of reproducibility in recompression will have to be addressed, but the issue is that lbmk does not provide its own sources for compression utilities, instead opting to use the system's own compression utility so the solution might be for lbmk not to use the host's utility, and compile its own, or insert the refcode uncompressed. for now, simply disable the hp 820 g2 target in libreboot releases this uses the same logic recently implemented for excluding mrc-based haswell images in libreboot releases Signed-off-by: Leah Rowe <leah@libreboot.org>