| Age | Commit message (Collapse) | Author |
|---|
|
main() used to be the only function executed from
outside of main(), in this script, but now we source
a config file and then run the build afterward.
when a flag is provided without OPTARG, this means
that we are continuing such action erroneously. to
mitigate this, return 1 in that instance, and handle
it in the line that calls main(), making it exit with
zero status (success).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
instead of using lots of if/else conditions, do that once
and set a variable, dry, to :
if not doing a dry run, the variable is empty. prefix this
variable in places where you don't want a certain action to
be performed, on dry runs.
more specifically, : does *nothing* and always returns with
zero status (success).
this results in cleaner code, and a small sloccount reduction.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
move the coreboot-specific includes into mkhelper.cfg
for that project.
on some projects, we need variables from mkhelper.cfg
to be global, so I was including serprog and coreboot
mkhelper.cfg files in this script.
instead, set a new variable "mkhelpercfg" pointing to
the config file. if it doesn't exist, create and then
point to a temporary (empty) mkhelper.cfg file.
the rom.sh include has been moved to coreboot mkhelper.cfg
The only remaining project-specific logic, in this trees
script, is now the coreboot crossgcc handling, but this
needs to be there as it's also used to build U-Boot.
The way this now works, certain includes are done twice.
For example, include/rom.sh will be included once globally,
outside of main(), and then again in configure_project().
This means that certain functions will be defined twice.
I'm uncertain if shell has anything equivalent to an ifdef
guard as in C, but we actually want this here anyway, and
it shouldn't cause any problems. It's a bit of a hack, but
otherwise results in much cleaner code.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
files under include/ should never be executed directly
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
otherwise, due to the idiosyncratic nature of the coreboot
build system, the coreboot.rom gets wiped out.
cbutils is still handled by premake. ensure that payloads are
only inserted just after running the coreboot make command.
fixes a build issues introduced on 9020sff, previously unhandled.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
pro-tip: don't do this at 3AM
do massive changes like this, no later than 1AM.
the intent anyway is for -d to cause no build dependencies
to be handled, but the current logic says to only handle
them if -d is set! fix it by removing the ! part
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
-d does the same as -b, except for actually building
anything! in effect, it does the same as -f (fetch)
except that the resulting variable assignments will
not be recursive (as with -f).
if -d is passed, configuration is still loaded, defconfig
files are still cycled through, and more importantly:
helper functions are still processed.
the grub, serprog and coreboot helper functions have
been modified to return early (zero status) if -d is
passed.
this behaviour will be used to integrate vendor.sh
logic in with the trees script, for cases where the
user wants to only handle vendor files. e.g.:
./update trees -b coreboot x230_12mb
this would download the files as usual, build coreboot,
with those files, and then build the payloads. but:
./update trees -d coreboot x230_12mb
this would download the files, NOT build coreboot, and
NOT build the payloads.
this change increases the sloccount a bit, but i'm relying
on the fact that the vendor.sh script already re-implements
config handling wastefully; the plan is to only use trees.
for now, simply stub the same ./vendor download command.
there is one additional benefit to doing it this way:
this method is *per-kconfig* rather than per-target.
this way, one kconfig might specify a given vendor file
that is not specified in the other. although the stub
still simply handles this per target, it's done in premake,
which means that the given .config file has been copied.
this means that when i properly re-integrate the logic
into script/trees, i'll be able to go for it per-kconfig.
the utils command has been removed, e.g.
./update trees -b coreboot utils default
the equivalent is now:
./update trees -d coreboot default
this would technically download vendor files, but here
we are specifying a target for which no kconfigs exist;
a check is also in place, to avoid running the vendor file
download logic if tree==target
the overall effect of this change is that the trees script
no longer contains any project-specific logic, except for
the crossgcc build logic.
it does include some config/data mkhelper files at the top,
for serprog and coreboot, so that those variables defined in
those files can be global, but another solution to mitigate
that will also be implemented in a future commit.
the purpose of this and other revisions (in the final push
to complete lbmk audit 6 / cbmk audit 2) is to generalise as
much logic as possible, removing various ugly hacks.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <info@minifree.org>
|
|
stub it from the trees script. the way it works now,
there is less code in the build system.
./build roms
this is no longer a thing
./build roms serprog
this is also no longer a thing. instead, do:
./update trees -b coreboot targetnamehere
./update trees -b pico-serprog
./update trees -b stm32-vserprog
the old commands still works, which causes the new
commands to run
coreboot roms now appear in elf/, not bin/, as before,
but those images now contain payloads.
NOTE: to contradict the above: ./build roms is no
longer a thing, in that it's now deprecated, but
backward compatibility is present for now. it will
be removed in a future release.
./build roms list also still works! it will do:
./update trees -b coreboot list
also:
./update trees -b grub list
this is now possible too
if a target "list" is provided, for multi-tree sources,
the targets are shown.
there is another difference: seagrub roms are now seagrub_,
instead of seabios_withgrub.
seabios-only roms are no longer provided, where grub is also
enabled; only seagrub is used. the user can easily remove
the bootorder file, if they want seabios to not try grub first.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we no longer need to call trees -b for payloads, because
build_depend is set in coreboot target.cfg files
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
set a default one in mkhelper.cfg
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
rename it to configure_project, because the function now
also handles building (a little bit), not just mere loading
of configuration files.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We already have this to an extent, e.g. the xtree variable.
The xtree variable could probably be removed, in favour of
this, and used for the same purpose.
It works like this, for example:
build_depend="coreboot/default grub/xhci seabios u-boot/gru_bob flashprog"
the "/" denotes a tree, if it's a multi-tree project. However, specifying
the entire multi-tree project without slash is possible, for example:
build_depend="coreboot"
this would specify that all coreboot trees must be built.
This functionality will be used in follow-up commits, centralising
script/trees into mk on the main directory, repacing "build".
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
don't put it in the install modules.
this works around a hanging issue on haswell thinkpads.
when any usb device is inserted, GRUB will sometimes
hang if started from the SeaBIOS payload, *while* the
USB device is plugged in.
plugging in the USB device after GRUB starts worked.
it will have to be investigated more at a later date,
but this simply configuration change works.
the xhci module is already loaded explicitly, in grub.cfg
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
stick the makeargs in mkhelper
i previously did cbmakeargs because the old revisions
had to define makeargs per-target otherwise. mkhelper
was done specifically to solve that problem.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
config/data/PROJECT/mkhelper.cfg can be provided, for
configuration, and it is loaded *before* target.cfg
there are certain instances where we repeat a lot of
config per tree, in multi-tree projects.
for example, we have the exact same config per grub
tree, besides tree name and revision number, for things
like autoconf arguments.
this last problem will be addressed, in a follow-up
patch, and then expanded upon for other projects.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
e.g. ./update trees -f
if passed, this command would download every tree
similarly, the -c option can be used in this way. this
solves a longstanding issue: on the current, much more
efficient design, it was not possible to systematically
clean every project.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
merge it into the only calling function
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some of the variables only initialised in git.sh are
also used in the trees script, which is technically ok
because git.sh is included from the trees script, but
it makes more sense to declare them in the latter.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
loc is already set, and will correspond to the same
path, so we can quite conveniently use it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i forgot to add the check for CHANGELOG
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the git_prep function already creates the given
directory where source code goes, so we don't
need to do it from the trees script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's only ever used once, so just use the value that
it's set to, without declaring the variable itself
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's already defined inside the trees script
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
behaviour described there is obvious just
from analysing the while loop condition
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
when downloading multi-tree projects, the rev can be reset
to HEAD instead of the actual rev for a given target. this
occurs when the bare repo (e.g. src/coreboot/coreboot) does
not exist and has to be downloaded first.
bare repository downloading does not rely on target.cfg, in
this context, only pkg.cfg, but it uses the same variable
names (e.g. "rev").
instead of using a separate variable name, thus increasing
code complexity (which is the exact opposite of what i want
to do), do the bare repository download first.
this means that the git.sh script is much cleaner now, for
multi-tree projects, in that it *only* copies the bare repo
then runs git_prep; in that context, the bare repo is cloned
directly by calling the relevant function from script/trees,
which is the same behaviour as when cloning single-tree
project sources.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the same function that loads configurations for single-tree
projects has been merged with the function for multi-tree
configs in git.sh, and that functionality has been removed
from git.sh; now it is all unified in the trees script.
as the saying goes: write one program to do one thing well.
the purpose of git.sh is to download source code, but not
to handle configuration files; the latter is meant to be
handled by the trees script, which then calls into git.sh
before running the build logic for that given project.
additionally: the "seen" files are no longer handled, at all.
the logic there was added ages ago, because at the time, i was
considering whether to separate configuration into a new
repository, so that users could more easily make their own
configuration, so it was a guard against misconfiguration.
however, that decision was canceled and we're always very
careful not to introduce a loop; if a loop does occur, the
worst that can possibly happen is you waste some CPU cycles.
Instead, print (on standard output) what config file is being
used, so the operator can see when an infinite loop occurs.
ALSO:
remove _setcfgarg in load_project_config()
it was used to skip when a target.cfg file didn't exist,
specifically on single-tree projects, but this is now
handled using -f instead, on the while loop inside that
function, so _setcfgarg is now a redundant variable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
run it from load_project_config()
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
