| Age | Commit message (Collapse) | Author |
|---|
|
unify all of the logic, where git am and submodule is handled
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Actually, it's 2 commits after 2.12, because there was a
patch added afterwards, fixing a build issue on Gentoo.
These changes are present in GRUB 2.12, relative to the
revision that we previously used on lbmk:
* b835601c7 build: Include grub-core/extra_deps.lst in dist
* 8961305b4 Bump version to 2.13
* 5ca9db22e Release 2.12
* 477a0dbd5 efi: Add support for reproducible builds
* dcc1af5d6 efi: Generate stack protector canary at build time if urandom is available
* e424e945c efi: Initialize canary to non-zero value
* 7c8ae7dcb gfxmenu/gui_image: Fix double free of bitmap
* 63fc253fc commands/acpi: Fix calculation of ACPI tables addresses when processing RSDT and XSDT
* f20123072 libnvpair: Support prefixed nvlist symbol names as found on NetBSD
* a13df3d15 bootstrap: Don't check gettext version
* 6d2aa7ee0 kern/mm: Use %x and cast for displaying sizeof()
* b3d49a697 configure: Add RPATH for freetype on NetBSD
* 52dbf66ea configure: Add *BSD font paths
* 2d6a89980 autogen: Accept python3.10 as a python alternative
* 3d4cb5a43 build: Rename HAVE_LIBZFS to USE_LIBZFS
* e4dbe5cfa gnulib: Tolerate always_inline attribute being ignored
* 31e47cfe2 util/editenv: Don't use %m formatter
* f5905f656 osdep/bsd/hostdisk: Fix NetBSD compilation
* cb1824a87 osdep/generic/blocklist: Fix compilation
* 2f3faf02c disk/diskfilter: Remove unused variable
* 3815acc57 build: Tolerate unused-but-set in generated lexer/bison files
* c129e44e7 loader/i386/bsdXX: Fix loading after unaligned module
* 89fbe0cac grub-core/Makefile.am: Make path to extra_deps.lst relative to $(top_srcdir)/grub-core
* 353beb80c util/grub-install: Move platdir path canonicalization after files were copied to grubdir
* f18a899ab util/grub-mkstandalone: Ensure deterministic tar file creation by sorting contents
* ed74bc376 util/grub-mkstandalone: Ensure stable timestamps for generated images
* 069cc46c9 net/http: Fix gcc-13 errors relating to type signedness
* e7a831963 templates: Reinstate unused version comparison functions with warning
* 3f9eace2d util/grub-install: Delay copying files to {grubdir,platdir} after install_device was validated
* e60015f57 efi: Set shim_lock_enabled even if validation is disabled
* e35683317 docs: Improve bli module documentation
* 57059ccb6 bli: Add explicit dependency on the part_gpt module
* 154dcb1ae build: Allow explicit module dependencies
* 17c68472d kern/ieee1275/init/ppc64: Display upper_mem_limit when debugging
* 5f8e091b6 kern/ieee1275/init/ppc64: Fix a comment
* dc569b077 kern/ieee1275/ieee1275: Display successful memory claims when debugging
* 0ac3d938a loader/powerpc/ieee1275: Use new allocation function for kernel and initrd
* 2a9a8518e kern/ieee1275/cmain/ppc64: Introduce flags to identify KVM and PowerVM
* 679691a13 kern/ieee1275/init/ppc64: Rename regions_claim() to grub_regions_claim()
* d49e86db2 kern/ieee1275/init/ppc64: Add support for alignment requirements
* fe5d5e857 kern/ieee1275/init/ppc64: Return allocated address using context
* ea2c93484 kern/ieee1275/init/ppc64: Decide by request whether to initialize region
* 0bb59fa9a kern/ieee1275/init/ppc64: Introduce a request for regions_claim()
* aa7c13226 fs/xfs: Add large extent counters incompat feature support
Most notable in the above log, that are beneficial to Libreboot
users, are:
aa7c13226 which improves XFS support (large extents), which is default
now on many setups.
ed74bc376 which introduces more stable timestamp generation when using
grub-mkstandalone. this is what lbmk uses to generate grub.elf, whereas
grub previously only implemented this fix on mkimage which we don't use
f18a899ab which ensures deterministic (reproducible) tar file creation
by sorting contents (file names / directories). this is done by sorting
the entries
f5905f656 which improves grub build system reliability on netbsd and
openbsd systems - useful for us because an ambition of lbmk is to port
the build system to run on bsd systems, and we will still want grub -
several other of the changes here are beneficial for BSD aswell, all
or most of them by Vladimir Serbinenko
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
right now, if we want to patch a project such that certain
submodules are no tdownloaded, or diffreent submodules are
downloaded, or current ones are downloaded from other
locations, we cannot do this, because we apply submodule
updates *before* applying patches.
therefore, we should change it so that they are applied
*after* installing patches.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is now used in grub, for the FS_PAYLOAD_MODULES
option in the make command
lbmk should generalise as much logic as possible. in
some parts of it, logic is hurrently hardcoded, specific
to a given project that lbmk uses, but lbmk is essentially
a source-based package manager, like what you might find
on a small linux distro, so we need to try to
be as generic as possible.
lbmk is the "build system of build systems", so it has to
work generically with as many of them as possible
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it is no longer hardcoded just to be handled for uefiextract.
it is now defined as cmakedir in target.cfg, for a single or
multi tree project. if multi tree, it is applied to the specific
tree, and has to be defined per tree
the way it works is: as per cmakelist, a project will define
which directory is to be built, and it will then generate
a makefile in the main source tree (the build tree in cmake
language, where the main CMakeLists.txt file exists)
when the makefile has been generated, the project is then treated
like any other project. the way cmake works, if a makefile has
already been generated by it, in a given directory, running it
again will fail and not affect anything; if it fails but the
makefile doesn't exist, then something is wrong, but if the
makefile does exist, then it's all fine and nothing happens
at present, this is only used for uefiextract, which is part
of src/uefitool
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the logic of the previous commit was correct, but one
of the functions was named the same as another function
used in this file, causing a namespace conflict, and
a build error
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
at present, the bootstrap and configure script is only
directly executed for grub, because grub is the only
project that uses them in lbmk
however, when i start adding linuxboot support, i will
have to start building a lot of projects, some of which
make use autoconf and bootstrap scripts
e.g.
./bootstrap --foo
./configure --bar
the "bootstrap" script is often used on GNU programs,
because they like to over-engineer absolutely everything
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the script can now also handle autoconf build systems,
whereas this could previously only be done for grub.
with this change, the overall sloccount is also lower
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's not well-tested and currently doesn't build
this is for later
remove for now
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
arch no longer needs to be set, on multi-tree projects,
and it has been renamed to xarch
the new behaviour is: if xarch is set, treat it as a
list of crossgcc targets and go through the list. set
the first one as the target, for what lbmk builds, but
build all of the defined crossgccc targets
crossgcc_ada is now xlang, and defines which languages
to build, rather than whether to build gcc-gnat
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i had to run make-oldconfig on all of them, because
of the port that riku added the other day. lbmk doesn't
use defconfigs, it uses full configs, so we have to
make sure they're kept in sync
this patch is the result of running the following command
in a fresh clone of lbmk:
./update trees -u coreboot
i should probably switch to defconfigs.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/173
|
|
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
while seemingly pedantic, this does actually make code
easier to read. mostly just switching to shorthand for
variable names, where no expansions or patterns are used
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i left this in here during the last change
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
riku committed a new patch, that fixes build errors
when PICO_DEFAULT_LED_PIN is not defined, on a given
board. in such cases, riku's new patch just disables
handling of the status LED, but LEDs continue to work
on boards where it is defined.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the new revision sets drive level to 12mA instead
of the default 4mA. 16-20mA is the maximum tolerated
level for data lines, on most flash ICs, so 12mA is
relatively safe.
riku did this a while ago, tested on pico pi.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the rom functions print a path to the rom they built,
which is then used, but these are called inside what
are essentially subshells, and we had no error handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
cros roms are always using libgfxinit, with a coreboot
framebuffer, so the "normal" initmode is never used.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the e6400_4mb target has libgfxinit and (if seabios) vgarom
initialisation, but has issues on the nvidia model, even when
using nomodeset. with this target, e6400nvidia_4mb, only
the vgarom initialisation is used, libgfxinit is disabled.
on nvidia models, this one should work a little bit better.
specifically: nouveau crashes on this machine, with libreboot
installed, but you can use nomodeset. however, when libgfxinit
is also enabled, nomodeset no longer works properly.
so this target disables all video initialisation in coreboot.
only seabios will initialise anything video-related, by
executing the vga option rom.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lbmk used to set version/versiondate directly in
err.sh, but now it's handled there by a function,
which is called by the main script.
script/update/release hadn't yet been adapted. the
only change necessary is to call check_project()
script/update/trees also makes use of it
script/build/roms is using "projectname"
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
when make-all is being executed on a coreboot tree,
the "./vendor download target" command is used, where
target is the tree/board name.
that script then checks whether cbfstool and ifdtool
are built, and if they're not, they then call
./update trees -b coreboot utils bla bla bla
in this scenario, project=coreboot and mode="", meaning
make-all, and the same check that checks whether the
vendor download script should be run, is executed,
which in turn then checks cbutils again
fix the infinite loop by checking whether it was coreboot
utils, as opposed to *firmware*, that is to be built, before
running ./vendor download
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the x_ function doesn't handle arguments with spaces
well, and this cd command is going to an asterisk, so
it's unknown what the resultant string will be.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
at present, lbmk can remove microcode updates on images for
a given target, if the target specifies
microcode_required="n" in target.cfg
lbmk then provides images with microcode, and images without,
in a given release. although the user can also remove them
manually, this just makes it a bit more convenient, for those
users who do wish to run without the updates. this functionality
is provided only on those platforms where no-microcode is tested.
well, this behaviour implements a compromise on libreboot policy,
which is to always include microcode updates by default. see:
Binary Blob Reduction Policy
the *canoeboot* project now exists, developed in parallel with
libreboot, and it ships without microcode updates, on the same
targets where lbmk also handled this.
running without microcode updates is foolish, and should not
be encouraged. clean up lbmk by not providing this kludge.
the libreboot documentation will be updated, telling such users
to try canoeboot instead, or to remove the update from a given
libreboot rom - this is still possible, and mitigations such as
PECI disablement on GM45 are still in place (and will be kept),
so that this continues to work well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the purpose of script/update/release is not to test the
build system, but to build release archives.
testing of lbmk is done during the course of development.
remove this bloat from the release script. we run the nuke
mode anyway, to scrub blobs from releases, which will more
or less test the logic in that script (the only difference
is that it runs e.g. ifdtool --nuke instead of -i).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
why are we distributing gcc at all?
the coreboot build system downloads it at build time,
and the GNU rsync mirrors aren't going anywhere.
simplify script/update/release by not handling gcc.
this means: release archives will no longer contain gcc.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/172
|
|
this affects 8460p and 8470p only, as the others' updates
aren't common across different boards
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
don't handle "romtype" at all, in board target.cfg files
add /dev/null as pike2008 rom on amd boards. this serves
the same purpose, adding them as empty vga roms, to add
an empty rom in cbfs. pike2008 cards cause seabios to hang,
when their oproms are executed, so we insert a fake rom
on i945 thinkpads, use the coreboot config option:
CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK
when set, this enables the same bootblock copy, for use
with bucts. these two cases, namely pike2008 roms and
i945 bootblock copies, no longer need to be handled in code
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the extract_archive function already provides use
of unzip, and works just fine (for mrc.bin extraction)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the shellball (for extracting the coreboot rom, to get
at mrc.bin) contains lines that are not posix-friendly.
specifically, the "local" command is used, and this is
not defined for posix sh.
the shellball is essentially just a bunch of shell
functions that compress/decompress the zip file,
containing the firmware update. you can modify the
files and re-run the shellball to recompress, though
lbmk just uses the decompress function.
as pointed out by Nicholas Chin, it is possible to just
run "unzip" directly on the update, to get at bios.bin.
we don't really need all the extra checks performed by
the shellball, so let's just bypass it altogether.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Riku_V/lbmk:vbt8460p into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/171
|
|
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
the x220 edp patch invalidated lots of configs, so
i did: ./update trees -u coreboot
this is the resulting patch
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
