summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-17roms: remind the user about gkb filesLeah Rowe
nowadays, we don't insert GRUB keymaps automatically, for sake of efficiency; without one, the default is US QWERTY. a user will only want one keymap in particular, so this is more efficient. in practise, they're either building from source anyway, or using the inject scripts which compile cbfstool anyway, so the user will already have cbfstool. also output this message from the inject script. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-17roms: rename x variable to it in for loopaudit6-merge1Leah Rowe
there are two for loops that use x as a variable anme, and an idiosyncrasy of certain sh implementations is that these become global; the result in this case was that when you finish building every target in "./build roms", it would print "libgfxinit" repeatedly, comma separated, instead of a comma-separated list of the targets that were built. work around it by renaming the variable in one of the loops. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: don't use x_ to call cproms()Leah Rowe
cproms() never returns non-zero, so it doesn't make sense to use x_ here Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms build_uboot_roms(): move rom, don't copyLeah Rowe
that way, we don't have to delete the temporary file. just move it entirely. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms cproms(): allow other commands besides cpLeah Rowe
e.g. the operator might specify mv instead Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16unify coreboot elfdir (DO_NOT_FLASH)Leah Rowe
use a common string when setting this path Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: merge mkUbootRom() into build_uboot_roms()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: simplify mkSeabiosRom()Leah Rowe
remove variables that are not meaningfully used Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: simplify mkUbootRom()Leah Rowe
remove variables that are not meaningfully used Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: simplify build_roms()Leah Rowe
cbcfg is already a global variable, so there's no reason to set it again at the start of this function. remove the check for whether the given coreboot config exists, to the calling function instead of build_roms(). Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: remove unnecessary checkLeah Rowe
uboot_config is later only used if payload_uboot is set Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16build: remove unused variablesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: further clean up build_grub_roms()Leah Rowe
the tmpcfg variable will be useful elsewhere, for the same kind of change as before. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: simplify timeout/scandisk insertionLeah Rowe
we don't need to call mktemp everytime. just use a staticly named file in tmpdir and keep overwriting it. these files are only small, and they get deleted when the build system exits later on. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: simplify seagrub check in build_grub_romsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: simplify mkserprog()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16roms: simplify the serprog build functionsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-16script/roms: fix serprog build commandsLeah Rowe
forgot to shift Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: simplified ubootelf checkLeah Rowe
we check it twice, which we don't need to do. we only need to check it once! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: simplify grubonly check in configure_targetLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: simplify seagrub check in configure_targetLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: don't use x_ to call build_grub_romsLeah Rowe
build_grub_roms never returns a non-zero value Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15trees: simplify copy_elf()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15trees: remove unnecessary check in copy_elfLeah Rowe
we don't need to check whether this variable is set, because checking an empty path will also cause the same return in the next line. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15grub: insert background in memdisk insteadLeah Rowe
the background is only a few kb. the whole rationale before was to limit the space used in memdisk, but this decision was made when the background was much bigger; it has since been optimised greatly, and the grub modules were heavily reduce, so it should be safe. grub's memdisk breaks when you add too much data to it. as part of simplifying the rest of lbmk, this change removes some more bloat from the rest of lbmk. handling this in the memdisk is much simpler than handling it with cbfstool. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: unify all add-payload commandsLeah Rowe
add a generic function that can insert payloads with lzma compression, or raw files without compression Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-15roms: don't add grub keymaps at allLeah Rowe
if not inserted, the default keymap is usqwerty. don't waste ssd write cycles copying so many images, or cpu time compressing so many. the user can simply add a keymap.gkb file to cbfs and it will work fine. this will be documented in the next release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: merge handle_coreboot_target into main()Leah Rowe
rely on return status per each of the three main rom functions, to then update the "targets" variable. use this as the basis to determine which targets were built, during final confirmation when the script exits. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: simplify target check (whether roms built)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: simplify main() againLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: remove redundant check on grub_scan_diskLeah Rowe
the current validation check is extremely over-engineered, because the user override is no longer available and we're always very careful in how we modify target.cfg per board. remove the redundant code. trust that target.cfg is correct. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: remove dangerous runtime p/s/d optionsLeah Rowe
p = payload s = grub_scan_disk d = displaymode setting the payload is no longer safe, due to issue 216 and similar issues that might pop up in the future; it's best left only to target.cfg, per board, so that we know what config is safe/tested. don't let the user override it. scandisk isn't safe to override because the given machine may not have the type of device that the user specifies displaymode is actually ok to set, because it simply whitelists what configs pre-existing to actually use, but it's bloat basically, the rule is this: don't make it easy for the user to brick their hardware. make it harder instead. a user wily enough to go modifying their payload will probably have read docs/maintain/ anyway and knows how to edit target.cfg if they want another board configuration. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14unified checks for variable initialisationLeah Rowe
new function chkvars() does the job Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14lib.sh: remove the items() functionLeah Rowe
it's pretty much just doing the same thing as ls -1 remove it! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-14roms: simplify main()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12Libreboot 20240612 release20240612Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12coreboot nasm: use coreboot mirror as backupLeah Rowe
don't use the macports mirror, because it's not certain whether those tarballs will always be there. use the coreboot one as a backup instead, and nasm.us as main Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12haswell: add Mate's patch fixing IGD port listLeah Rowe
fixes DP++ and adds a DP that wasn't even there before, on all currently supported variants of these machines Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12haswell: add Nico's patch for IGD PCI IDsLeah Rowe
the patch fixes IGD on certain xeon processors Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-12grub: only enable nvme if needed on a boardLeah Rowe
remove nvme support from the "default" grub tree now there are three trees: * default: no xhci or nvme patches * nvme: contains nvme support * xhci: contains xhci and nvme support this is in case a bug like lbmk issue #216 ever occurs again, as referenced before during lbmk audit 5 there is no indication that the nvme patch causes any issues, but after previous experience i want to be sure Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-11fix nasm download path for coreboot/fam15hLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09minor code cleanup in the build systemLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09re-add ability to use cbfs grub.cfg as defaultLeah Rowe
i removed this before, when making grub multi-tree, because the design i used in an earlier version of the patch actually added the grub.elf generation to grub source itself, but then i decided to hack around the grub build system from lbmk/cbmk instead re-add this functionality, so that users can easily insert their own custom grub.cfg into cbfs without needing to re-build their image. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09trees: exit with error if project undefinedLeah Rowe
i was originally looser about this, because i also wanted the trees script to generically run "make" from any directory, but this behaviour was error-prone and it is no longer used in the build system. disable it, in the interest of stability. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09build: also make a lock file during release buildLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: more useful lock messageLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09create a lock file during buildsLeah Rowe
prevent duplicate main instances of the build system from running the lock file is deleted when the parent process exits, alongside the tmpdir deletion the build system must only ever be run ot one instance at a time, per work directory Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: hide e() output on for loopLeah Rowe
this for loop is a hack to make sure that all the sources get nuked (using nuke.list files). hide the messages so that they do not appear when running just any command in the trees script. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09lib.sh: fix regressionLeah Rowe
i was being a bit too clever about some optimisations revert this change. otherwise, nothing will download or build Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-09git.sh: download xtree *before*, not afterLeah Rowe
downloading it after means that if an error occurs when downloading the xtree project, the main project will still be there and nothing will mandate the downloading of the xtree project. whereas, if we grab the xtree project first, then the main project won't get saved to src/ this makes the build system a bit more resilient under fault conditions, but otherwise doesn't change behaviour. Signed-off-by: Leah Rowe <leah@libreboot.org>