summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-08remove coreboot/dell9020mtvga_12mbLeah Rowe
keep dell9020mt_12mb dell9020mtvga_12mb doesn't actually work (was tried for running a graphics card on its own, with no igpu init) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-02-07Merge pull request 'update revision: pico-serprog' (#185) from ↵Leah Rowe
Riku_V/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/185
2024-02-07update revision: pico-serprogRiku Viitanen
should fix https://codeberg.org/libreboot/lbmk/issues/182 Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2024-02-07update coreboot configsLeah Rowe
this was done automatically by running: ./update trees -u coreboot this has to be done when adding patches for now board ports, because of the way lbmk and also coreboot's build systems work. the configs just have to be re-generated to include a line that says the entry for the newly added boards isn't set. look at the diff of this commit as an example. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-02-07Merge pull request 'Add Latitude E6420, E6520, and E5530' (#183) from ↵Leah Rowe
nic3-14159/lbmk:latitude-ports into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/183
2024-02-07support making u-boot-only tarballs in releasesLeah Rowe
./update release -m u-boot if someone just wants to make u-boot, they can use this and it tars up all the trees. Signed-off-by: Leah Rowe <info@minifree.org>
2024-02-06config: Add Dell Latitude E5530Nicholas Chin
Tested by Martin Dawson. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-02-06config: Add Dell Latitude E6520Nicholas Chin
Tested by Martin Dawson. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-02-06config: Add Dell Latitude E6420Nicholas Chin
Tested by Martin Dawson. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-02-04add vga-only 9020 configLeah Rowe
on a dgpu setup, igpu was still in use, when tested by a user. do separate roms that don't enable anything vga in coreboot, relying instead only on seabios to execute a vga rom. these roms will only work if you have a graphics card. Signed-off-by: Leah Rowe <info@minifree.org>
2024-02-04NEW BOARD: Dell OptiPlex 9020 MT (and 7020 MT)Leah Rowe
Specifically the MT versions. The SFF versions will be added separately, in a later commit. See: https://review.coreboot.org/c/coreboot/+/55232 This patch has been added, from patchset 31. It still has some unresolved issues, on that patchset, but it should boot. See commit message there. Of note: I've enabled PCI REBAR, though it's unknown whether it will work (some comments there about it though, on that gerrit page). I've also set CBFS size to 8MB, not the full size of the BIOS region; this is required on the T440p which uses the same mrc.bin file, to get S3 working. TSEG stage cache disabled, as on other Haswell boards. The setup: SeaBIOS-only as first payload, but with GRUB enabled as secondary payload. The _grubonly setup has been enabled here. This way, the config will work on iGPU and dGPU setups without issue. Signed-off-by: Leah Rowe <info@minifree.org>
2024-02-03import dell optiplex 7020/9020 patch from gerritLeah Rowe
coreboot gerrit patch 55232, patchset 31 the actual board will be enabled in a follow-up patch. merging the patch on its own first is better practise, to run ./update trees -u coreboot this way, there won't be a revision that breaks builds, due to the idiosyncratic nature of coreboot configuration. Signed-off-by: Leah Rowe <info@minifree.org>
2024-01-28update pico-serprog to Riku's new revisionLeah Rowe
Riku introduced three new patches: * Add support for multiple chip selects. This allows you to control multiple chips from the same clip, on systems with dual flash setups, at least theoretically. * Enable pull-up on unused chip selects - pull them high so that chips you connect that to are deactivated while flashing the target chip. This could be used on thinkpad W541 for instance, where miso/mosi have 0ohm between them via the two flash ICs. You could pull the other chip select high. * Documentation for the above, in the pico-serprog readme. This goes in tandem with a patch from Riku, present in the recently integrated flashprog project, namely: commit ddb6d926783d4f9cbee04c7392718ed8f89daa0e Author: Riku Viitanen <riku.viitanen@protonmail.com> Date: Mon Jan 15 19:15:49 2024 +0200 serprog: Add support for multiple SPI chip selects This functionality will therefore be present in the next release of Libreboot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-28Merge pull request 'flashprog: apply the good old MX25 workaround' (#180) ↵Leah Rowe
from Riku_V/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/180
2024-01-28flashprog: apply the good old MX25 workaroundRiku Viitanen
2024-01-27remove remaining flashrom remnants (use flashprog)Leah Rowe
we use flashprog now! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-27update parabola dependencies for flashprogLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-27update arch dependencies for flashprogLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-27update trisquel dependencies for flashprogLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-27update debian dependencies for flashprogLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-27config/git: use flashprog instead of flashromLeah Rowe
Nico Huber is the rightful project lead. I do not support the coup that occured within the flashrom project. Nico has always been of great service to the Libreboot project, by virtue of his work on both coreboot and flashrom. Nico Huber was unfairly removed from the flashrom project infrastructure, due to unfounded accusations hurled at him by flashrom's new project lead. The accusations are unfounded because no evidence was given. Use Nico Huber's fork, named flashprog. We will work with flashprog from now on. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-26Libreboot 2024012620240126Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-26git.sh: also reset xtree/tree_depend hereLeah Rowe
it's still necessary here, to prevent the same bug identified in the previous patch. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-26update/trees: reset xtree/tree_depend before buildLeah Rowe
in some cases, the build system was needlessly, and sometimes erroneously, creating crossgcc symlinks, which then caused an issue, namely: in lbmk release builds, dell e6400 is build before fam15h boards, and it sets xtree, but fam15h_rdimm doesn't, and later this would cause fam15h_rdimm boards to use xtree="default" (because they don't set xtree), causing the newer toolchain to be used on coreboot 4.11. this patch fixes the issue. quite a simple problem, actually. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25update config/git/docs to latest revsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25dell/e6*30: use generic PS2K/PS2M EISAID stringsLeah Rowe
CONFIG_PS2M_EISAID. this is a a string used for the identifier on the mouse, in ACPI. CONFIG_PS2K_EISAID this is used for the keyboard. IASL comes back with this build error: dsdt.asl 1884: Name(_HID, EISAID("DLLK0534")) Error 6045 - ^ EISAID string must be of the form "UUUXXXX" (3 uppercase, 4 hex digits) (DLLK0534) Change DLLK0534 back to PNP0303 and change DLL0534 back to PNP0F13. These are generic identifiers for PS/2 keyboard and mouse. Any generic driver will work with the onboard mouse/keyboard on these machines. They do not need to be changed. These are the default values anyway. Just leave them explicitly defined to the default values, for now; if these options are not set, coreboot will default to these values. This shouldn't break anything for the users. I've reported this to Nicholas Chin, author of those patches. Libreboot imported the new versions of E6430/E6530 board patches in the coreboot revision update, but the new (technically correct) values broke IASL, so I've decided to use the old values for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25update coreboot/dell to same rev as defaultLeah Rowe
re-use the same patches, and drop the same patches. this tree uses hell's special ddr2 fix, which we apply for the dell latitude e6400. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-25coreboot/default: update coreboot to January 2024Leah Rowe
Base revision changed to: commit b6cbfa977f63d57d5d6b9e9f7c1cef30162f575a Author: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Date: Fri Jan 5 16:48:17 2024 +0800 mb/google/dedede/var/metaknight:Add fw_config probe for multi codec and amplifier Of note: Several out-of-tree ports have been adjusted to use the new SPD config style, where it is defined in devicetree. I manually updated the E6530 patch myself, based on the update that Nicholas did on E6430 (Nicholas will later update the E6530 patch himself, and I'll re-merge the patch). Several upstream patches now exist in this revision, that we were able to remove from lbmk. The heap size patch was reverted upstream, as we did, but see: https://review.coreboot.org/c/coreboot/+/80023 https://review.coreboot.org/c/coreboot/+/79525 Although we still disable the TSEG Stage Cache, ivy/sandy/haswell should be reliable on S3 now (leaving TSEG Stage Cache disabled, for now, anyway). Also included in upstream now: commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94 Author: Bill Xie <persmule@hardenedlinux.org> Date: Sat Oct 7 01:32:51 2023 +0800 drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume Further patches from upstream: commit 432e92688eca0e85cbaebca3232f65936b305a98 Author: Bill Xie <persmule@hardenedlinux.org> Date: Fri Nov 3 12:34:01 2023 +0800 drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum This should fix S3 on GM45 thinkpads. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-23script/vendor/inject: remove erroneous checkLeah Rowe
the boarddir variable is only set *after* detect_board is run, and is in fact checked after that. this check, removed by this patch, is too early and causes lbmk to exit with error states. this patch fixes the error. the error was that lbmk was then searching for a file that is at an empty path. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21fam15h boards: define xtreeLeah Rowe
these should be using the rdimm tree for crossgcc, so define it explicitly. the build system creates a symlink too, but it's still best that we use it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21coreboot/fam15h_udimm: define xtreeLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21don't download projects on release archivesLeah Rowe
the changelog file is only present in releases, so use the presence of this file for the test. someone who wants to fetch projects within a release archive can simply use the git repo, or delete the file. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21update/release: generate changelogsLeah Rowe
use the git log, as follows: git log --graph --pretty=format:'%Cred%h%Creset %s %Creset' --abbrev-commit this creates a nice, uniform list of changes. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21fix amd mainboard configsLeah Rowe
in a build test, canoeboot 0.1 builds, but master doesn't, and neither does lbmk. i changed a few of them when doing the crossgcc build optimisation patches. i'm just copying the configs from there. unlike in the canoeboot version of this patch, i've re-enabled microcode updates in these lbmk configs. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21git.sh: fix bad call to ./updateLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21git.sh: support downloading dependency treesLeah Rowe
a tree can specify: tree_depend="treename" this will make the other tree be downloaded. this is used for coreboot trees, to ensure that dependency trees are downloaded, because trees can now re-use crossgcc from other trees. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21re-use crossgcc builds on the coreboot treesLeah Rowe
don't build crossgcc twice, especially if two coreboot trees use the same revision! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21allow multitree projects to define xgcc treeLeah Rowe
let them specific it, rather than falling back to coreboot/default (can also be used for coreboot boards) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21u-boot: don't define xarch in defaultLeah Rowe
it's only needed for each board Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21coreboot/*/target.cfg: don't define xarchLeah Rowe
it's defined per board Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21grub/target.cfg: move --disable-werrorLeah Rowe
i meant to push it in configure args, not bootstrap Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21coreboot/fam15h: disable -Werror on binutils 2.32Leah Rowe
work around newer build issues, on very bleeding edge distros (disable treating warnings as errors) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-21grub: use --disable-werror on ./configureLeah Rowe
work around build issues on very bleeding edge distros Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-20dependencies/arch: add pandoc to dependenciesLeah Rowe
pandoc is required by the grub build system, when running autoconf at the start of the build process Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-18GRUB: insert only 1 keymap per board, in cbfsLeah Rowe
There is no need to add multiple keymap files, because GRUB can load keymaps from CBFS. The current build logic is designed to avoid building multiple GRUB binaries, which are expensive computationally because each one would then have to be compressed for each board. This patch provides the best of both worlds: less space used in flash like in the old lbmk design (1 keymap per board), but retaining the current build speeds and therefore not re-introducing the slowness of lbmk's previous GRUB build logic. The grub.cfg file has been modified, accordingly. It now only loads a keymap.gkb file from CBFS, by default. It does this, only if that file exists; if not, GRUB already defaults to US Qwerty layout anyway. ALSO: compress all keymap gkb files with xz -6 GRUB automatically decompresses files when accessed. This results in about 2KB of flash space saved in CBFS. Here is real-world data, showing the increased flash space: < fallback/payload 0x3eb80 simple elf 548821 none < keymap.cfg 0xc4bc0 raw 16 none < (empty) 0xc4c00 null 11633316 none --- > fallback/payload 0x3eb80 simple elf 546787 none > keymap.gkb 0xc43c0 raw 344 none > (empty) 0xc4540 null 11635044 none This was taken by diffing the cbfstool "print" output, both before and after. The *after* result is with this change. 11633316. In this example, 1728 bytes have been saved. Therefore, with compression taken into account, this patch saves about 1.7KB of space in CBFS. This change means that lbmk can now scale to support hundreds of keymaps, without increasing the amount of flash space used, in each given image. Since the keymap files are compressed in lbmk.git, in advance, we spend no additional time on compression at build time. The resulting change in build speed in negligible. Adding your own keymap.gkb file was already possible, for changing the keymap in libreboot images, if you didn't want to change the memdisk (and thus re-compile grub.elf). Now, this is the default behaviour, and the only way to do it. It's much more efficient. The original keymap files can be restored, by running unxz. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-17build/roms: err if -k layout doesn't existLeah Rowe
if the user defines a layout that doesn't exist, throw an error in lbmk. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-17build/roms: regression fix: uninitialised variableLeah Rowe
the "kmapdir" variable was removed in an earlier audit, but was overlooked for -k because that option was untested. rather than initialise the variable, re-use grubcfgsdir. this fix enables e.g. "-k usdvorak" to work again. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-14Merge pull request 'config/dependencies/trisquel: replaced package from ↵Leah Rowe
ttf-unifont to fonts-unifont' (#177) from goodspeed/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/177
2024-01-14config/dependencies/trisquel: replaced package from ttf-unifont to fonts-unifontWilliam Goodspeed
ttf-unifont no longer exists on trisquel aramo. --- Package: fonts-unifont Breaks: ttf-unifont (<< 1:13.0.02-1) Replaces: ttf-unifont (<< 1:13.0.02-1) --- Signed-off-by: William Goodspeed <goodspeed@anche.no>
2024-01-12REMOVE MAINBOARD: lenovo x201Leah Rowe
with neutered ME, fan control fails. while there are ways to mitigate it, many users will not, and will likely see their system overheat, which is very dangerous. this bug (failed fan control on neutered ME) only affects arrandale machines such as lenovo x201. the newer machines are not affected by this. other arrandale machines will probably not be added to libreboot because of this, or they will be subject to further testing. Signed-off-by: Leah Rowe <leah@libreboot.org>