| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lbmk was massively re-written, very recently.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
(#134) from nic3-14159/lbmk:e6400-flash-unlock-updates into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/134
|
|
also rename elf/coreboot to something scary
some users were flashing roms built under elf/, which
lack payloads. lbmk builds no-payload roms (and payloads)
under elf/ then inserts them, creating full (flashable)
images under bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This updates lbmk's copy of e6400-flash-unlock to commit c5567fece479
(README.md: Update with info about broader device support) in my
upstream repo.
Changes:
- Theoretical support for any Dell system that implements that flash
descriptor override command. This is done by reading base address
registers at runtime instead of hard coding them for specific devices.
Tested on the Latitude E6400 and Latitude E6430.
- Support for OpenBSD. It compiles, runs, and behaves as expected,
though I have not actually tested internally flashing with flashrom
yet. It should work though, as the program checks if the descriptor
override is set and the BIOS Write Enable is able to be set to 1, which
is all that is needed to internal flash.
- Integrated changes made in the lbmk copy
- Moved operating system accessor implementations to their own file
It should be fully functional, though minor formatting and cleanup
changes are still planned.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
it's unarchiver in repos. not unar.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's already executed in "build"
running it in err.sh makes the user have to set
git name/email as root, when running dependencies
scripts. this is a regression, that this patch
fixes. git isn't needed to install dependencies.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is for the latest ubuntu release.
the ubuntu2004 config (for ubuntu 20.04) still exists,
and will remain in place.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
symlinked to the debian config
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
a user installed these dependencies in popos, but autopoint
was missing during the grub build.
add autopoint to the debian dependencies config.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some users reported build errors. technically, there's
nothing wrong with lbmk but it relies on hostcc, and
hostcc is hit or miss when it comes to cross compiling
32-bit, depending on the build system of whatever project.
lbmk needs to handle cross compilation. for now, i'm just
disabling memtest86plus on non-64-bit hosts.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The logic has been re-written, where source archives are
concerned. This clones the current repository, and starts
a new build from scratch. A custom release directory is
possible, by passing -d
This eliminates a step during build-testing, saving hours
of time, because it builds the release archive *inside* the
release archive, with git files removed, thus replicating
the same setup that the user would have.
This also makes everything a bit more consistent, because
it's guaranteed that a release archive will always have
the same files; previously, the release build script would
only copy what was already built, without building anything.
Now, this script builds everything itself.
The script also builds serprog images, not just coreboot.
Usage:
./update project release
If -d is not passed, release/ is used inside lbmk.
Otherwise, you could do:
./update project release -d /path/to/directory
If the directory exists, this script will exit (error).
Other minor fixes: build/fw/coreboot: make version in
coreboot-version (file) not contain hyphens, to work
around a quirk in coreboot's build system when not building
on regular libreboot releases. this quirk only appears
when lbmk is not being compiled under git.
The other main benefit of this change is that the new
script will probably require a lot less maintenance.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the script used to be called once per target, now it
handles every target. the grub background image wasn't
being set, so if it changed at build time, it would
stay changed.
keep the default in place for each run, while still
allowing target.cfg files to change it per target.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
most of the changes since last revision aren't very
useful to us; most of them pertain to fs/ntfs, but
there is one that is interesting:
48f569c78a496d3e11a4605b0999bc34fa5bc977
kern/acpi: Skip NULL entries in RSDT and XSDT
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Just one script.
Just one!
Well, two, but the 2nd one already existed:
logic in update/project/trees and
update/project/repo was merged into
include/git.sh and update/project/build
was renamed to update/project/trees; an -f
option was added, which calls the functions
under git.sh
so git clones are now handled by the main build
script (for handling makefiles and defconfigs)
but the logic there is a stub, where git.sh
does all the actual heavy lifting
this cuts the file count down by two, and reduces
sloccount a reasonable amount because much of
the logic already exists in the build script, when
it comes to handling targets. git.sh was adjusted
to integrate with this, rather than act standalone
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I'm planning to re-use this function later, in other
files, to unify handling of target.cfg files.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
otherwise, if src/grub/ was already compiled, this
would not print anything on the screen. however, the
files will have been created under elf/grub
this message just makes lbmk a bit more user friendly
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This eliminates an additional subdirectory.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is far less error-prone
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
certain functions are better placed there, rather than
in the main script
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The benefit now is that it can be cleaned. E.g.
./update project build -b coreboot utils
./update project build -b coreboot utils default
./update project build -c coreboot utils
./update project build -c coreboot utils default
the update/project/build script checks when arguments
are provided after the project name. if the first one
is "utils", then it acts in the same way as the old
build/coreboot/util script
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's buggy. "./build fw coreboot" was made to work,
but it caused lots of unknown issues when mixing other
args
the old way wasn't broken. now, once again, you must
pass the "all" argument. e.g.:
./build fw coreboot all
Also, the confirmation messages at the end are a bit
clearer, when listing which ROM images were compiled.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove include/export.sh
it's not a lot of code, and build is the only
file that uses it
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in the future, we may start downloading files that aren't
blobs, such as mxm port configs (on mainboards that use
MXM graphics)
this directory will contain all of those files
generally change the language used, across lbmk, to make
use of "vendorfile" instead of "blob"
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some utils were being needlessly re-downloaded.
fix that!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use the variable that is set up in blobutil.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
during the switch to src/ for all downloads, i
overlooked that the path check was hardcoded.
now the check for this binary is corrected.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
We don't have a directory names "srces", just "src".
Ditto ecs, mrcs <-- it's just ec and mrc
When referring to a file, e.g. blob/t1650/me.bin, that
makes much more sense, because it's a single blob, not
multiple blobs.
Don't pluralise what isn't plural
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
build/release/src was partly re-written to accomodate this
memtest86plus was patched to have a central Makefile, and
lbmk modified to use that, rather than mess with build32
and build64. the central Makefile just builds both targets
or cleans both targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
return with error status if no images were compiled
if a rom image fails to compile, then it will also
exit with error status, but sometimes you can pass
argument "cros" or "default", and it would not give
you rom images due to no target.cfg files, but these
are also ignored because of that.
this restores the same behaviour that existed before,
for this final error check.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
with no argument specified, it is now possible to build
every rom image.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
./build boot roms is now: ./build firmware coreboot
./build fw serprog is now: ./build firmware serprog
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
re-link update to build
build/update are the only two build modes now
i'm on a crusade to reduce the number
of files and directories, and reduce the number
of source lines, while not reducing functionality
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Just one script.
Just one.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
for the first time ever, this is a single script.
with recent simplifications in how variables are
handled, and techniques i've developed during
auditing, it's now feasible design-wise for this
to be a single script, without a helper script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
