summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-03update/release: say when an archive is being madeLeah Rowe
without this change, the user might think lbmk crashed Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-02Merge pull request 'dell-flash-unlock: Remove dependency on GNU Make' (#207) ↵Leah Rowe
from nic3-14159/lbmk:dell-flash-unlock-updates into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/207
2024-05-01dell-flash-unlock: Remove dependency on GNU MakeNicholas Chin
Use shell scripting in the recipe instead of GNU make's conditional syntax. This allows the Makefile to work with the default implementations of make on the BSDs. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-02Merge pull request 'Fixed QEMU x86 target's SMBIOS informations' (#205) from ↵Leah Rowe
livio/lbmk:qemux86_fix into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/205
2024-05-02Merge pull request 'Fixed boot selection menu' (#204) from ↵Leah Rowe
livio/lbmk:livio_290424 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/204
2024-05-02Merge pull request 'dell-flash-unlock-updates' (#206) from ↵Leah Rowe
nic3-14159/lbmk:dell-flash-unlock-updates into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/206
2024-05-01dell-flash-unlock: Update README for BSDNicholas Chin
Add FreeBSD to the README as it is now supported. Make a note about using gmake instead of make as the makefile currently uses GNU extensions to determine build flags based on the OS. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01dell_flash_unlock: Add support for FreeBSDNicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01dell_flash_unlock: Set iopl level back to 0 when doneNicholas Chin
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01dell_flash_unlock: Fix ec_set_fdo() signatureNicholas Chin
Set argument list as void. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-05-01Fixed QEMU x86 target's SMBIOS informationslivio
2024-05-01Fixed QEMU x86 target's SMBIOS informationslivio
2024-05-01Fixed boot selection menulivio
2024-05-01correct dell latitude status for releaseLeah Rowe
it should be marked unstable, though these machines are basically reliable; they have certain missing features and quirky behaviour so it's important not to over-sell it mark it as unstable, on all of the dell latitudes Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01update release status for HP machinesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01set gru bob/kevin stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01set dell latitudes stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-05-01mark i945 machines as stable for releaseLeah Rowe
the previous issue was tested, and can no longer be reproduced Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-29build/roms: simplified list handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28dell-flash-unlock: Remove unnecessary includes for NetBSDNicholas Chin
The pio.h header, although present on NetBSD, is not necessary, as it only declares x86 port IO inx()/outx() functions which are not actually implemented. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-04-28dell-flash-unlock: Remove memory clobber from inline assemblyNicholas Chin
The x86 port IO instructions do not access memory so it is not needed in the clobber list. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2024-04-28build/roms: if release, allow all non-broken romsLeah Rowe
this includes untested roms Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: always display warningsLeah Rowe
(even if status=stable) Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: reduce indentation in skip_board()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: simplified status handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: simplified seagrub handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28build/roms: support SeaGRUB *with menu enabled*Leah Rowe
This is useful on desktops, where you want GRUB to automatically start, but you still want access to the GRUB menu, in the case where you rely on SeaBIOS to execute the VGA ROM inside your graphics card. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28update/trees: simplified defconfig copyingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28option.sh: don't use nproc (not portable)Leah Rowe
export LBMK_THREADS=x where x is an integer. this is already supported for setting the number of build threads, but if not set it uses nproc. openbsd doesn't have nproc. default to 1 thread. now you MUST set threads. e.g. in linux do: export LBMK_THREADS=$(nproc) preliminary work is being done to make lbmk run on openbsd! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28eDP configs (x230/x220): don't releaseLeah Rowe
set to release="n" for now until the eDP targets are fixed. the regular non-eDP targets are stable, and will be released. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28fix target.cfg files on dell latitudesLeah Rowe
some latitudes still used the old style for variables in target.cfg, specifically arch="x86_64" - lbmk used to then check that on a big if/else and translate it to the correct target name for crossgcc, e.g. i386-elf, arm-eabi now it just puts the arch directly, in a new variable: xarch change arch="x86_64" to xarch="i386-elf" in these files. also remove a few obsolete variables. should build now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-28use mirrorservice.org for iasl downloadsLeah Rowe
github is unreliable. i host these files myself. coreboot uses intel.com again now in the latest revisions, and intel broke it before. i'm going to start backing up the acpica releases onto my rsync server from now on, and keep patching coreboot to use my files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update/release: disable status checkingLeah Rowe
just to ensure that nothing goes wrong. we don't rely on the status variable for releases, because there is another variable, release, that target.cfg files declare, e.g. release="n" release="y" you can just omit the variable, because it defaults to y, so you only need declare it when it needs to be "n" Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27build/roms: tell the user how to ignore statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update macbook21/x60/t60 statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27allow disabling status checks during buildsLeah Rowe
export LBMK_STATUS=n if not set, the status checks and confirmation dialogs persist. if set to y they persist. if you set it to n, all checks are disabled, so e.g.: ./build roms all this would once again build all targets, regardless of status. this is if you want the old behaviour. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update 9020 sff/mt release statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27update more board statuses before releaseLeah Rowe
what's left to properly test are pineview/x4x/i945 and some of the ivy/sandy elitebooks/hp workstations Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27Set status=unstable on dell latitudesLeah Rowe
also warn about issues, in a warn.txt file for each. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27declare ivy/sandy thinkpads stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27declare gm45 thinkpads stable for releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-27kcma-d8/kgpe-d16: mark as tested(unstable)Leah Rowe
raminit has never been fully reliable on this board, and so this board has never been stable. so, now that lbmk specifies such status per board, mark these boards as such. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26Merge pull request 'dell-flash-unlock: add NetBSD support' (#194) from ↵Leah Rowe
linear/lbmk:master into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/194
2024-04-26build/roms: update help, pertaining to statusLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26build/roms: let "list" specify status typesLeah Rowe
for example: ./build roms list this will list every now, still. same behaviour. now see: ./build roms list stable this will list all stable roms ./build roms list untested this lists untested roms. but wait! ./build roms list untested broken unstable ./build roms list broken unstable yes. it works this way. now you can use lbmk to easily see what rom status are, during maintenance. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26erroneous returnLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26build/roms: report status when building imagesLeah Rowe
export LBMK_VERSION_TYPE=x x can be: stable, unstable in target.cfg files, specify: status=x x can be: stable, unstable, broken, untested if unset, lbmk defaults to "unknown" if LBMK_VERSION_TYPE is set, no confirmation is asked if the given target matches what's set (but what's set in that environmental variable can only be stable or unstable) if LBMK_RELEASE="y", no confirmation is asked, unless the target is something other than stable/unstable "unstable" means it works, but has a few non-breaking bugs, e.g. broken s3 on dell e6400 whereas, if raminit regularly fails or it is so absolutely unreliable as to be unusable, then the board should be declared "broken" untested means: it has not been tested With this change, it should now be easier to track whether a given board is tested, in preparation for releases. When working on trees/boards, status can be set for targets. Also: in the board directory, you can add a "warn.txt" file which will display a message. For example, if a board has a particular quirk to watch out for, write that there. The message will be printed during the build process, to stdout. If status is anything *other* than stable, or it is unstable but LBMK_VERSION_TYPE is not set to "unstable", and not building a release, a confirmation is passed. If the board is not specified as stable or unstable, during a release build, the build is skipped and the ROM is not provided in that release; this is in *addition* to release="n" or release="y" that can be set in target.cfg, which will skip the release build for that target if "n" Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26i945: switch boards to 20230625 coreboot revisionLeah Rowe
On T60 with Libreboot 20231106 and the GRUB payload, a user reported this error in GRUB when a battery was connected: "alloc magic is broken at 0x7b1aedf0: 0" This error disappears when a battery is not connected, or when using Libreboot 20230625. The issue has persisted through to LIbreboot 20240225 and after, and I believe the issue will be somewhere in coreboot, not in GRUB itself. For now, switch i945 laptops (X60, T60, Macbook2,1) back to the February 2023 coreboot revision used in Libreboot 20230625. A bisect can be done before the next Libreboot release, ETA May 2024, if time permits. Otherwise, this revert should solve the problem for now, at least so far as Libreboot is concerned. The following coreboot patches have been backported: commit 29030d0f3dad2ec6b86000dfe2c8e951ae80bf94 Author: Bill Xie <persmule@hardenedlinux.org> Date: Sat Oct 7 01:32:51 2023 +0800 drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume Further patches from upstream: commit 432e92688eca0e85cbaebca3232f65936b305a98 Author: Bill Xie <persmule@hardenedlinux.org> Date: Fri Nov 3 12:34:01 2023 +0800 drivers/pc80/rtc/option.c: Reset only CMOS range covered by checksum These patches fixed S3 on GM45 machines, though it will be useful on the i945 machines aswell. The reason I'm doing it this way it is because I don't have a battery for my X60 or T60, and my T60 isn't in a very good state either, so I can't reproduce the error myself yet. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26exports variables from err.sh, not buildLeah Rowe
LC_COLLATE and LBMK_RELEASE are important variables. we want to make sure that these are seen by everything. since err.sh is included from all scripts, doing it there will accomplish just that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-04-26GRUB: bump to today's latest revisionLeah Rowe
GRUB has not pushed many patches to master since the recent 2.12 release, but there are a number of interesting fixes. libreboot is doing a release soon. bump to latest grub revision. Some of the new patches in GRUB are interesting: XFS fixes: "fs/xfs: Handle non-continuous data blocks in directory extents" 68dd65cfdaad08b1f8ec01b84949b0bf88bc0d8c Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2254370 Apparently, XFS could not boot in some reports, though this was likely with BIOS or UEFI GRUB; no such reports were made to libreboot "gfxmenu/view: Resolve false grub_errno disrupting boot process" 39c927df66c7ca62d97905d1385054ac9ce67209 "util/grub-fstest: Add a new command zfs-bootfs" 28c4405208cfb6e2cea737f6cbaf17e631bac6cd The gnulib revision does not need to be updated at this time. Signed-off-by: Leah Rowe <leah@libreboot.org>