summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-17trees: remove repo/p, not src/p/pLeah Rowe
repo/p/ does not have its revision reset, so it changes unpredictably, and it's not used in builds. this used to be src/p/p/ - the context here is multi-tree projects, in source archives. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17git.sh: don't download to src/project/project/Leah Rowe
re-use repo/project/ this means that single- and multi-tree projects now have a unified cached git repo location, as per the new rules, thus saving on disk space usage. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-17git.sh: cache git downloads to repo/Leah Rowe
do it based on the URL, e.g. https://review.coreboot.org/coreboot becomes repo/coreboot the downside is if you have two projects with repo urls specifying the same string at the end, but this isn't the case at the moment and likely won't be the case, but it's a theoretical issue. this saves on bandwidth when downloading identical submodule repos between multiple trees within the same multi-tree project for example, coreboot 3rdparty/vboot is no longer downloaded more than once, instead cloned locally on subsequent downloads. if repo/DIR exists, git-pull is attempted, but errors do not result in a non-zero exit, by design. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-16remove util/autoportLeah Rowe
upstream has merged all of the changes that it contained, so we don't need this anymore. we'll have the newer upstream changes on the next general revision updates for coreboot, within config/coreboot/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-13trees: move dependency building to new functionLeah Rowe
configure_project is a bit big. move the dependencies build logic to a new function. it may be desirable in future to make the way that function works the way all build commands are done. for example: ./update trees -b coreboot x230_12mb would become: ./update trees -b coreboot/x230_12mb this would enable to mix and match multi/single tree projects. for now, leave things as they are. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-11Merge pull request 'Update U-Boot to v2024.07' (#225) from ↵Leah Rowe
alpernebbi/lbmk:uboot-v2024.07 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/225
2024-07-11u-boot: Fix display initialization on gru boardsAlper Nebi Yasak
U-Boot has migrated to using upstream device-tree files for gru boards, but the clock driver doesn't yet support setting rates for a certain clock that upstream uses for the eDP display. It happens to work without it, so for now remove the clock setting until the driver is fixed. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2024-07-11u-boot: Avoid breaking build for U-Boot-only binman imagesAlper Nebi Yasak
Commit 46e01c0e1dad ("u-boot: Avoid building U-Boot-only binman images") added a patch that prevents an error while building U-Boot, due to some U-Boot images needing a copy of BL31 that we are not passing in. Removing build instructions for these images isn't really necessary, when we can instead tell the build tool that it shouldn't exit with an error. It checks a BINMAN_ALLOW_MISSING environment variable for this, but just unconditionally replace the check with the argument. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2024-07-11u-boot: Update to v2024.07Alper Nebi Yasak
Set default U-Boot revision to v2024.07 and rebase patches on top of that. One patch that fixes drawing box characters (UTF-8 to CP437) had an alternative merged, another hack we have to fix regulator issues is no longer neccessary as the issue is fixed, and my QEMU patches were merged upstream, so drop these patches. One patch we have to disable binman images can be replaced by a simpler alternative so drop it too. Upstream kconfig status is still unstable, so updating configs with `make oldconfig` would miss important upstream changes, since they rely on carrying defaults via upstream defconfigs. Update the configs as such, like before: - Turn old configs into defconfigs (./update trees -s u-boot) - Save the diff from old upstream defconfig (diffconfig $theirs $ours) - Update U-Boot revision, rebase patches, and clean old trees - Prepare new U-Boot tree (./update trees -f u-boot) - Review the diffconfigs to see if any options were renamed upstream - Copy over the new upstream defconfigs and apply earlier diff - Turn new defconfigs into configs (./update trees -l u-boot) Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2024-07-11trees: fix bad comparison in configure_project()Leah Rowe
we used to set cmd only to these values: build_project build_targets however, now we set them to: build_project build_targets $@ the latter cannot be measured reliably, but we were checking whether cmd equalled: build_targets now we instead check that it does not equal: build_project Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-11trees: don't continue if no argument givenLeah Rowe
main() used to be the only function executed from outside of main(), in this script, but now we source a config file and then run the build afterward. when a flag is provided without OPTARG, this means that we are continuing such action erroneously. to mitigate this, return 1 in that instance, and handle it in the line that calls main(), making it exit with zero status (success). Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10trees: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10trees: merge build_targets() with handle_targets()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10trees: use wrapper for dry-running make commandsLeah Rowe
instead of using lots of if/else conditions, do that once and set a variable, dry, to : if not doing a dry run, the variable is empty. prefix this variable in places where you don't want a certain action to be performed, on dry runs. more specifically, : does *nothing* and always returns with zero status (success). this results in cleaner code, and a small sloccount reduction. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10trees: remove project-specific hacksLeah Rowe
move the coreboot-specific includes into mkhelper.cfg for that project. on some projects, we need variables from mkhelper.cfg to be global, so I was including serprog and coreboot mkhelper.cfg files in this script. instead, set a new variable "mkhelpercfg" pointing to the config file. if it doesn't exist, create and then point to a temporary (empty) mkhelper.cfg file. the rom.sh include has been moved to coreboot mkhelper.cfg The only remaining project-specific logic, in this trees script, is now the coreboot crossgcc handling, but this needs to be there as it's also used to build U-Boot. The way this now works, certain includes are done twice. For example, include/rom.sh will be included once globally, outside of main(), and then again in configure_project(). This means that certain functions will be defined twice. I'm uncertain if shell has anything equivalent to an ifdef guard as in C, but we actually want this here anyway, and it shouldn't cause any problems. It's a bit of a hack, but otherwise results in much cleaner code. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10remove executable permission on include/Leah Rowe
files under include/ should never be executed directly Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10rom.sh: actually say if a cbutil existsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10rom.sh: avoid re-building cbutils if builtLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10rom.sh: only before cbutils before corebootLeah Rowe
otherwise, due to the idiosyncratic nature of the coreboot build system, the coreboot.rom gets wiped out. cbutils is still handled by premake. ensure that payloads are only inserted just after running the coreboot make command. fixes a build issues introduced on 9020sff, previously unhandled. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-10trees: fix bad comparisonLeah Rowe
pro-tip: don't do this at 3AM do massive changes like this, no later than 1AM. the intent anyway is for -d to cause no build dependencies to be handled, but the current logic says to only handle them if -d is set! fix it by removing the ! part Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09minor cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-09trees: support -d (dry run) for custom build logicLeah Rowe
-d does the same as -b, except for actually building anything! in effect, it does the same as -f (fetch) except that the resulting variable assignments will not be recursive (as with -f). if -d is passed, configuration is still loaded, defconfig files are still cycled through, and more importantly: helper functions are still processed. the grub, serprog and coreboot helper functions have been modified to return early (zero status) if -d is passed. this behaviour will be used to integrate vendor.sh logic in with the trees script, for cases where the user wants to only handle vendor files. e.g.: ./update trees -b coreboot x230_12mb this would download the files as usual, build coreboot, with those files, and then build the payloads. but: ./update trees -d coreboot x230_12mb this would download the files, NOT build coreboot, and NOT build the payloads. this change increases the sloccount a bit, but i'm relying on the fact that the vendor.sh script already re-implements config handling wastefully; the plan is to only use trees. for now, simply stub the same ./vendor download command. there is one additional benefit to doing it this way: this method is *per-kconfig* rather than per-target. this way, one kconfig might specify a given vendor file that is not specified in the other. although the stub still simply handles this per target, it's done in premake, which means that the given .config file has been copied. this means that when i properly re-integrate the logic into script/trees, i'll be able to go for it per-kconfig. the utils command has been removed, e.g. ./update trees -b coreboot utils default the equivalent is now: ./update trees -d coreboot default this would technically download vendor files, but here we are specifying a target for which no kconfigs exist; a check is also in place, to avoid running the vendor file download logic if tree==target the overall effect of this change is that the trees script no longer contains any project-specific logic, except for the crossgcc build logic. it does include some config/data mkhelper files at the top, for serprog and coreboot, so that those variables defined in those files can be global, but another solution to mitigate that will also be implemented in a future commit. the purpose of this and other revisions (in the final push to complete lbmk audit 6 / cbmk audit 2) is to generalise as much logic as possible, removing various ugly hacks. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-08rom.sh: only make rom tarball if release=yLeah Rowe
Signed-off-by: Leah Rowe <info@minifree.org>
2024-07-07rom.sh: new file, to replace script/romsLeah Rowe
stub it from the trees script. the way it works now, there is less code in the build system. ./build roms this is no longer a thing ./build roms serprog this is also no longer a thing. instead, do: ./update trees -b coreboot targetnamehere ./update trees -b pico-serprog ./update trees -b stm32-vserprog the old commands still works, which causes the new commands to run coreboot roms now appear in elf/, not bin/, as before, but those images now contain payloads. NOTE: to contradict the above: ./build roms is no longer a thing, in that it's now deprecated, but backward compatibility is present for now. it will be removed in a future release. ./build roms list also still works! it will do: ./update trees -b coreboot list also: ./update trees -b grub list this is now possible too if a target "list" is provided, for multi-tree sources, the targets are shown. there is another difference: seagrub roms are now seagrub_, instead of seabios_withgrub. seabios-only roms are no longer provided, where grub is also enabled; only seagrub is used. the user can easily remove the bootorder file, if they want seabios to not try grub first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06roms: remove unnecessary trees checksLeah Rowe
we no longer need to call trees -b for payloads, because build_depend is set in coreboot target.cfg files Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06coreboot: set build_depend on target.cfg filesLeah Rowe
set a default one in mkhelper.cfg Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06trees: rename load_target_config()Leah Rowe
rename it to configure_project, because the function now also handles building (a little bit), not just mere loading of configuration files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06trees: support build dependencies, not just fetchLeah Rowe
We already have this to an extent, e.g. the xtree variable. The xtree variable could probably be removed, in favour of this, and used for the same purpose. It works like this, for example: build_depend="coreboot/default grub/xhci seabios u-boot/gru_bob flashprog" the "/" denotes a tree, if it's a multi-tree project. However, specifying the entire multi-tree project without slash is possible, for example: build_depend="coreboot" this would specify that all coreboot trees must be built. This functionality will be used in follow-up commits, centralising script/trees into mk on the main directory, repacing "build". Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-06GRUB: only load xhci from grub.cfgLeah Rowe
don't put it in the install modules. this works around a hanging issue on haswell thinkpads. when any usb device is inserted, GRUB will sometimes hang if started from the SeaBIOS payload, *while* the USB device is plugged in. plugging in the USB device after GRUB starts worked. it will have to be investigated more at a later date, but this simply configuration change works. the xhci module is already loaded explicitly, in grub.cfg Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-05trees: just do makeargs on coreboot, not cbmakeargLeah Rowe
stick the makeargs in mkhelper i previously did cbmakeargs because the old revisions had to define makeargs per-target otherwise. mkhelper was done specifically to solve that problem. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01trees: fix bad rm -Rf command (-Rf, not Rf)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01roms: fix bad comparison in configure_target()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-07-01GRUB: use mkhelper.cfg for common variablesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: allow global config on multi-tree projectsLeah Rowe
config/data/PROJECT/mkhelper.cfg can be provided, for configuration, and it is loaded *before* target.cfg there are certain instances where we repeat a lot of config per tree, in multi-tree projects. for example, we have the exact same config per grub tree, besides tree name and revision number, for things like autoconf arguments. this last problem will be addressed, in a follow-up patch, and then expanded upon for other projects. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: handle all projects if project undefinedLeah Rowe
e.g. ./update trees -f if passed, this command would download every tree similarly, the -c option can be used in this way. this solves a longstanding issue: on the current, much more efficient design, it was not possible to systematically clean every project. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30vendor.sh: remove mkdirs()Leah Rowe
merge it into the only calling function Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: simpler for loop in git_am_patches()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: merge for loops in git_am_patches()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees and git.sh: tidy up global variablesLeah Rowe
some of the variables only initialised in git.sh are also used in the trees script, which is technically ok because git.sh is included from the trees script, but it makes more sense to declare them in the latter. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: simplified initialisation of "loc"Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: simplified distclean directory checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: condense fetch_targets() a bitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: short git_prep command in fetch_targets()Leah Rowe
loc is already set, and will correspond to the same path, so we can quite conveniently use it. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: only do bare multi-tree clone on gitLeah Rowe
i forgot to add the check for CHANGELOG Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: simplified multi-tree bare repo cloneLeah Rowe
the git_prep function already creates the given directory where source code goes, so we don't need to do it from the trees script. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30git.sh: merge prepare_new_tree with fetch_targetsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees run_make_command: simpler distclean handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: condense copy_elf() a bitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: add return to handle_defconfig()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-06-30trees: rename check_config to check_defconfigLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>