| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
nowadays, we don't insert GRUB keymaps automatically, for
sake of efficiency; without one, the default is US QWERTY.
a user will only want one keymap in particular, so this
is more efficient. in practise, they're either building
from source anyway, or using the inject scripts which
compile cbfstool anyway, so the user will already have
cbfstool.
also output this message from the inject script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
there are two for loops that use x as a variable anme,
and an idiosyncrasy of certain sh implementations is
that these become global;
the result in this case was that when you finish building
every target in "./build roms", it would print "libgfxinit"
repeatedly, comma separated, instead of a comma-separated
list of the targets that were built.
work around it by renaming the variable in one of the loops.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
cproms() never returns non-zero, so it doesn't make
sense to use x_ here
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
that way, we don't have to delete the temporary file.
just move it entirely.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
e.g. the operator might specify mv instead
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use a common string when setting this path
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove variables that are not meaningfully used
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove variables that are not meaningfully used
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
cbcfg is already a global variable, so there's no reason
to set it again at the start of this function.
remove the check for whether the given coreboot config
exists, to the calling function instead of build_roms().
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
uboot_config is later only used if payload_uboot is set
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the tmpcfg variable will be useful elsewhere, for
the same kind of change as before.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we don't need to call mktemp everytime.
just use a staticly named file in tmpdir
and keep overwriting it.
these files are only small, and they get deleted
when the build system exits later on.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
forgot to shift
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we check it twice, which we don't need to do.
we only need to check it once!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
build_grub_roms never returns a non-zero value
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we don't need to check whether this variable is set,
because checking an empty path will also cause the
same return in the next line.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the background is only a few kb. the whole rationale
before was to limit the space used in memdisk, but this
decision was made when the background was much bigger;
it has since been optimised greatly, and the grub modules
were heavily reduce, so it should be safe.
grub's memdisk breaks when you add too much data to it.
as part of simplifying the rest of lbmk, this change removes
some more bloat from the rest of lbmk. handling this in the
memdisk is much simpler than handling it with cbfstool.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
add a generic function that can insert payloads with lzma
compression, or raw files without compression
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
if not inserted, the default keymap is usqwerty.
don't waste ssd write cycles copying so many images,
or cpu time compressing so many. the user can simply
add a keymap.gkb file to cbfs and it will work fine.
this will be documented in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
rely on return status per each of the three main rom
functions, to then update the "targets" variable.
use this as the basis to determine which targets were
built, during final confirmation when the script exits.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the current validation check is extremely over-engineered,
because the user override is no longer available and we're
always very careful in how we modify target.cfg per board.
remove the redundant code. trust that target.cfg is correct.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
p = payload
s = grub_scan_disk
d = displaymode
setting the payload is no longer safe, due to issue 216
and similar issues that might pop up in the future; it's
best left only to target.cfg, per board, so that we know
what config is safe/tested. don't let the user override it.
scandisk isn't safe to override because the given machine
may not have the type of device that the user specifies
displaymode is actually ok to set, because it simply whitelists
what configs pre-existing to actually use, but it's bloat
basically, the rule is this:
don't make it easy for the user to brick their hardware.
make it harder instead.
a user wily enough to go modifying their payload will probably
have read docs/maintain/ anyway and knows how to edit target.cfg
if they want another board configuration.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
new function chkvars() does the job
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's pretty much just doing the same thing as ls -1
remove it!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
don't use the macports mirror, because it's not certain
whether those tarballs will always be there. use the
coreboot one as a backup instead, and nasm.us as main
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
fixes DP++ and adds a DP that wasn't even there before,
on all currently supported variants of these machines
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the patch fixes IGD on certain xeon processors
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove nvme support from the "default" grub tree
now there are three trees:
* default: no xhci or nvme patches
* nvme: contains nvme support
* xhci: contains xhci and nvme support
this is in case a bug like lbmk issue #216 ever occurs
again, as referenced before during lbmk audit 5
there is no indication that the nvme patch causes any
issues, but after previous experience i want to be sure
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i removed this before, when making grub multi-tree,
because the design i used in an earlier version of
the patch actually added the grub.elf generation
to grub source itself, but then i decided to hack
around the grub build system from lbmk/cbmk instead
re-add this functionality, so that users can easily
insert their own custom grub.cfg into cbfs without
needing to re-build their image.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i was originally looser about this, because i also wanted
the trees script to generically run "make" from any
directory, but this behaviour was error-prone and it is
no longer used in the build system.
disable it, in the interest of stability.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
prevent duplicate main instances of the build
system from running
the lock file is deleted when the parent process
exits, alongside the tmpdir deletion
the build system must only ever be run ot one
instance at a time, per work directory
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this for loop is a hack to make sure that all the
sources get nuked (using nuke.list files).
hide the messages so that they do not appear when
running just any command in the trees script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i was being a bit too clever about some optimisations
revert this change. otherwise, nothing will download
or build
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
