summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-21Merge pull request 'config/ifd/xx30: Fix 16_ifd component density and count' ↵Leah Rowe
(#170) from nic3-14159/lbmk:xx30_16_ifd_fix into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/170
2023-12-21Merge pull request 'Add HP EliteBook 8460p' (#169) from Riku_V/lbmk:hp8460p ↵Leah Rowe
into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/169
2023-12-20config/ifd/xx30: Fix 16_ifd component density and countNicholas Chin
The component 1 and 2 densities were still set to 8 MiB and 4 MiB respectively, which is incorrect for 16 MiB only configurations. Change the component 1 density to 16 MiB so that the address space gets properly mapped to SPI 1. In addition, change the number of components field (byte 0x15) to 0x00 to indicate 1 flash chip. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-12-19Add HP EliteBook 8460pRiku Viitanen
Inside the BIOS update, there's 68SCE and 68SCF variants. Based on Qubes HCL and browsing linux-hardware.org, these are Probook 6360b and Elitebook 8460p respectively. I checked the KBC1126 EC Firmwares within the update file, both use the exact same firmware images. Following-up will be a very similar but untested port for 6360b. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-19git.sh: simplify submodule handlingLeah Rowe
do not use a subshell. use git -C instead. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19build initialise_command: simplify handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19update/release: minor cleanupLeah Rowe
remove unnecessary "continue" command. it's written at the end of a for loop, where it'll continue anyway Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19option.sh scan_config: clean up if/else blockLeah Rowe
the code wasn't very clear. make it clearer. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19option.sh: print error on stderr, not stdoutLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19option.sh: don't rely on zero status on printfLeah Rowe
this part of the code *must* return. the for loop afterwards must not be permitted to execute. it's unlikely that this would ever occur, unless perhaps the user is using a very buggy sh. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19git.sh git_am_patches: reduce indentationLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19git.sh fetch_config: simplify tree name checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg syslinux: support scanning /boot/EFI/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: fix pathLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle btrfs subvols for extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan extlinux/extlinux.confLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: support grub and extlinux on ata/ahciLeah Rowe
there are special menuentries just for loading configs, without handling luks, lvm and whatnot. it's intended for users of cd/dvd drives. well, now we support both extlinux and grub, with this patch. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: merge isolinux/grub usb menuentriesLeah Rowe
many modern distros use grub in their installer images, so scan for grub.cfg first. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: handle extlinux in the default menuentryLeah Rowe
isolinux/syslinux/extlinux config files should all work, using the syslinux parser function in grub the current behaviour is to only search for grub.cfg, so extlinux users can't use the default libreboot setup. with this change, their systems should hopefully work. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg syslinux: support ESP and extlinux.confLeah Rowe
the so-called EFI System Partition (ESP) is used on many UEFI-based setups. some users may be migrating to libreboot, so let's support it. on BIOS setups, it would be e.g. /boot/syslinux/syslinux.conf on UEFI setups, it would be e.g. /boot/EFI/syslinux/syslinux.conf additionally, support scanning for extlinux.conf Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: don't boot linux without a grub.cfgLeah Rowe
the fallback code in the main menuentry is potentially unsafe, depending on user config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18grub.cfg: scan lvm volumes lastLeah Rowe
lvm/* is slow to resolve in grub, on some machines, because grub enumeration is very slow in general. however, many people will install distros with any number of lvm configurations, so we should try to support them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-18Revert "grub.cfg: try luks2/crypto-lvm before non-crypto"Leah Rowe
This reverts commit 20389655e42e62ebf6d96dd106c91fbe74282557. If the user actually has encryption, but has /boot unencrypted, this will considerably slow down the boot, so the patch has been reverted. The patch was originally meant to favour encrypted /boot setups, but the old behaviour also still works there.
2023-12-18Merge pull request 'Dell-flash-unlock README updates from upstream' (#168) ↵Leah Rowe
from nic3-14159/lbmk:dell-flash-unlock-updates into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/168
2023-12-18grub.cfg: try luks2/crypto-lvm before non-cryptoLeah Rowe
when the user sets up an encrypted machine, grub.cfg defaults to non-encrypted setups if found, first this patch reverses the order, deferring to non-encrypted installations only when encrypted ones are unavailable Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-17README.md: Add possibly not working systemsNicholas Chin
These systems have a report that the unlock utility does not work. Until there are multiple reports of failed unlocks and a technical determination of why it doesn't work, they will not be listed as explicitly unsupported.
2023-12-17README.md: Add E6500, E6420, and E6530 as supportedNicholas Chin
2023-12-17README.md: Add instructions for relaxing memory permissionsNicholas Chin
As this utility requires access to /dev/mem, the default protections of Linux and OpenBSD must be relaxed to allow this. Make a note of this in the instructions.
2023-12-17README.md: Add references to Open Security TrainingNicholas Chin
The old Open Security Training site had a course called Advanced x86: BIOS and SMM Internals, which had a set of slides outlining the method to supress SMIs by changing the GBL_SMI_EN bit. Add a reference to it as this is where I originally learned of this method.
2023-12-18Merge pull request 'master' (#165) from risapav/lbmk:master into masterLeah Rowe
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/165
2023-12-18Merge pull request 'Update config/grub/config/grub.cfg' (#167) from ↵Leah Rowe
semigel/lbmk:semigel-btrfs-subvol-patch-1 into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/167
2023-12-18Update config/grub/config/grub.cfgsemigel
grub.cfg: add BTRFS subvol support
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-17added x220edp_8mbrisapav
2023-12-16remove DEBUG handling in lbmk (not needed)Leah Rowe
all it did was set -v in the shell, which doesn't yield very useful results. this is a relic of very old design in the libreboot build system, that is no longer needed. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-16fix several shellcheck warningsLeah Rowe
lbmk didn't quote certain arguments in commands, or used ! -z instead of -n, things like that. simple fixes. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-11Merge pull request 'config/dependencies/debian: add unifont-bin & ↵Leah Rowe
xfonts-unifont' (#163) from Riku_V/lbmk:debgrub into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/163
2023-12-11config/dependencies/debian: add unifont-bin & xfonts-unifontRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-11handle errors on exits from subshellsLeah Rowe
most of these are probably redundant, and will never be called, but lbmk needs to be as safe as possible under fault conditions. fail early, fail hard. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-11improved safety/error handling on multitree git-amLeah Rowe
update/trees wasn't correctly returning non-zero status, even though it was printing an error message, when git-am failed. this is due to the way subshells work, and it was overlooked in previous auditing. additionally: don't directly copy trees to the destination, instead patch/reset first, then copy only under normal condition, just as with single-tree projects. when running build/roms, the script would continue after a bad git-am, without exit. this patch fixes it in the most paranoid way possible. i'm now fairly confident that lbmk will fail gracefully and efficiently, under error conditions. this should prevent bad image builds. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-03Merge pull request 'fix void dependencies: openssl-devel' (#161) from ↵Leah Rowe
Riku_V/lbmk:fixvoid into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/161
2023-12-02fix void dependencies: openssl-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02Merge pull request 'fix void dependencies: freetype-devel' (#160) from ↵Leah Rowe
Riku_V/lbmk:fixvoid into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/160
2023-12-02fix void dependencies: freetype-develRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-12-02Merge pull request 'fix void dependencies typo' (#159) from ↵Leah Rowe
Riku_V/lbmk:fivoid into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/159
2023-12-02fix void dependencies typoRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-11-22revert flashrom back to version 1.2Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-15dependencies/debian: fix libfreetype-devLeah Rowe
install libfreetype-dev, instead of libfreetype6-dev this still works in debian stable (currently 12.2) but fixes debian sid, as of 15 November 2023. my test machine with debian sid could not install libfreetype6-dev, but could install libfreetype-dev Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-13grub: re-add fat/nt file system modulesLeah Rowe
apparently some people use fat file systems for /boot on linux systems this is apparently a thing it's ridiculous, but also a thing a user reported they could not boot their t400 because of those, because they have such a distro installed on their machine apparently it was a gentoo user i don't really care. re-add 1980s dos file system support. Signed-off-by: Leah Rowe <leah@libreboot.org>