| Age | Commit message (Collapse) | Author |
|---|
|
By default U-Boot stores EFI variables in a ubootefi.var file in
whatever EFI System Partition it finds, which would be a FAT filesystem.
I'm occasionally finding out while testing that my ESPs somehow end up
with a corrupted filesystem, and I'm suspecting it's this.
For now, disable storing EFI environment variables on disk so that
U-Boot doesn't try to manipulate the filesystem.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Enable U-Boot commands to manipulate EFI environment storage, to
self-test EFI implementation, and to run a basic EFI test application.
These are so that we can test and debug EFI functionality easier.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
U-Boot upstream is switching to a new code framework for discovering and
booting OSes ("Standard Boot", or "bootstd"). Enable more features for
it, including commands we can use for introspection and debugging.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Normally U-Boot immediately resets the board on a panic. I had run into
"Synchronous Abort"s from shim and rEFInd, and having a traceback in
those cases can be useful. Hang instead of resetting, so the panic
reason stays on the screen.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
We should be able to power the board off from U-Boot command line.
Enable the "poweroff" command for gru boards so we can.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
U-Boot can keep a "copy" framebuffer to read from, for devices where
reading from hardware framebuffer is expensive. This needs the video
driver to support it. The Rockchip video driver doesn't need or support
it, so this option does nothing on gru boards. Disable it.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
U-Boot upstream used to have 16KB for EFI variables, and this was
causing problems with shim. Commit f0236acbc663 ("u-boot: Increase EFI
variable buffer size") fixed this by raising it to 32KB in our builds.
It has now been raised to 64K upstream, so raise it here as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
For Rockchip boards U-Boot tries to build SPI and MMC images that
require an externally built BL31 file to be provided, and the build
fails otherwise. This is not really as configurable as it should be.
In Libreboot, we only care about the build outputs for U-Boot proper.
There is a BL31 built during our coreboot builds, but using that in
U-Boot builds is a chicken-and-egg problem. Building BL31 outside the
coreboot build and passing it to both projects is possible, but needs
work.
For now, stop trying to build these U-Boot-only images as a workaround,
by removing the binman image descriptions from the device-tree sources.
Additionally, disable in our configs the BINMAN_FDT functionality that
allows using these at runtime as it requires them to be present.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
U-Boot upstream has added a reference counting for regulator enable
actions which somehow makes gru-kevin unbootable. Add a workaround
that makes it work again.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Set default U-Boot revision to v2023.01 and rebase patches on top of
that. Another series about 16x32 fonts was merged upstream, so drop some
now-unnecessary patches we had for that. For the video damage tracking
series, switch to the version I'm trying to upstream.
Upstream kconfig status is a bit unstable, so updating configs with
`make oldconfig` would miss important upstream changes, since they rely
on carrying defaults via upstream defconfigs. Update the configs as
such:
- Turn old configs into defconfigs (./update project trees -s u-boot)
- Save the diff from old upstream defconfig (diffconfig $theirs $ours)
- Update U-Boot revision, rebase patches, and clean old trees
- Prepare new U-Boot tree (./update project trees -f u-boot)
- Review the diffconfigs to see if any options were renamed upstream
- Copy over the new upstream defconfigs and apply earlier diff
- Turn new defconfigs into configs (./update project trees -l u-boot)
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Add an "-s" flag for "make savedefconfig", "-l" for "make olddefconfig"
and "-n" for "make nconfig" to the update script. The first two are
mainly useful for U-Boot, to compare our configs to the upstream
defconfigs and stay in sync with any upstream changes. The latter is
because the ncurses one has a nice "Symbol Search" that can point out
the menu entry for a config symbol we know.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
The U-Boot build for qemu_arm64_12mb board refers to a code revision
whereas it uses the common "default" tree, remove the bad reference.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
The "u-boot.bin" file generated by U-Boot builds is a raw binary. When
adding payloads to a CBFS, we need to use ELF files with add-payload
or manually pass the entry point and load address of the payload binary
with add-flat-binary.
We primarily use the "u-boot.elf" which gets build with the REMAKE_ELF
option, as it also has the necessary device-tree binary that U-Boot
usually needs to work. When the option is not set (e.g. for QEMU), we
need to use the "u-boot" file which is an ELF.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i wasn't getting the very first line of tar --version,
so it wasn't doing the check properly.
further sort the files by name within the tar archive.
for reliability, don't bother using versiondate anymore:
set a *fixed* date, and fixed timezone, to ensure
that it works reliably for reproducible tarball creation.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This way, the handling of configs is unified into one
script, which reduces the possibility of bugs later,
and it reduces the repetition of code.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use find and touch, to force all files, directories and
links to the desired timestamp (versiondate file)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
e.g. src/coreboot/coreboot must not appear in a release,
because we instead have directories like
src/coreboot/default or src/coreboot/cros
lbmk resets src/coreboot/coreboot to HEAD, but then resets
revisions properly in copies of it
therefore, for reproducibility, we must not include
src/coreboot/coreboot, src/u-boot/u-boot or
src/seabios/seabios into libreboot releases
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
with --mtime, files added to the archive can be set
to a static date (in this case, the unix epoch)
the one used here is derived from git commit dates,
and it is static; if not being handled in lbmk.git,
the versiondate file never changes
this is the first patch in a series of patches designed
to bring about reproducible builds in libreboot
a solution will need to be found, for non-GNU tar
implementations, because they did not have an
equivalent option according to their manpages.
for example, BSD tar implementations.
perhaps i could systematically go around changing
file dates, on each file, as a fallback behaviour?
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
pass this argument: -m src
by doing this, only the src tarball will be made
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this way, the src tarball is guaranteed to be clean.
the downside is that lbmk itself does not currently
handle crossgcc downloads, and there may be some
stragglers such as third party modules automatically
downloaded by certain codebases that libreboot uses.
this will have to be audited later (and it will be).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's sometimes done unconditionally. this change
ensures that it is not repeated needlessly.
i observed otherwise that cbfstool would be
re-built from time to time, even if it was built.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This more accurately describes the scope of the utility.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Riku's mSATA patch for HP8300USDT was merged upstream, so the
patch has been dropped from lbmk because it is contained within
this new coreboot revision.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
coreboot closely matches upstream, whose current release
is version 1.2 from 2018, and coreboot has not changed it
in any meaningful way.
the upstream did add patches since, but they are documentation
patches only.
this means: we do not need to use the upstream version
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
under the current logic, errno would be ECANCELED
if neither checksum is valid, or I/O related if
pwrite fails; alternatively, the for loop exits
and the file has been written, where it is quite
correctly reset already.
ergo, the errno reset at the start of
writeGbeFile is superfluous. remove this bloat.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
previously, a bad checksum would have caused a non-zero
exit, even if the other checksum was correct (observed
when using the swap command)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lbmk was massively re-written, very recently.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
(#134) from nic3-14159/lbmk:e6400-flash-unlock-updates into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/134
|
|
also rename elf/coreboot to something scary
some users were flashing roms built under elf/, which
lack payloads. lbmk builds no-payload roms (and payloads)
under elf/ then inserts them, creating full (flashable)
images under bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This updates lbmk's copy of e6400-flash-unlock to commit c5567fece479
(README.md: Update with info about broader device support) in my
upstream repo.
Changes:
- Theoretical support for any Dell system that implements that flash
descriptor override command. This is done by reading base address
registers at runtime instead of hard coding them for specific devices.
Tested on the Latitude E6400 and Latitude E6430.
- Support for OpenBSD. It compiles, runs, and behaves as expected,
though I have not actually tested internally flashing with flashrom
yet. It should work though, as the program checks if the descriptor
override is set and the BIOS Write Enable is able to be set to 1, which
is all that is needed to internal flash.
- Integrated changes made in the lbmk copy
- Moved operating system accessor implementations to their own file
It should be fully functional, though minor formatting and cleanup
changes are still planned.
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
it's unarchiver in repos. not unar.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's already executed in "build"
running it in err.sh makes the user have to set
git name/email as root, when running dependencies
scripts. this is a regression, that this patch
fixes. git isn't needed to install dependencies.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is for the latest ubuntu release.
the ubuntu2004 config (for ubuntu 20.04) still exists,
and will remain in place.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
symlinked to the debian config
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
a user installed these dependencies in popos, but autopoint
was missing during the grub build.
add autopoint to the debian dependencies config.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some users reported build errors. technically, there's
nothing wrong with lbmk but it relies on hostcc, and
hostcc is hit or miss when it comes to cross compiling
32-bit, depending on the build system of whatever project.
lbmk needs to handle cross compilation. for now, i'm just
disabling memtest86plus on non-64-bit hosts.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The logic has been re-written, where source archives are
concerned. This clones the current repository, and starts
a new build from scratch. A custom release directory is
possible, by passing -d
This eliminates a step during build-testing, saving hours
of time, because it builds the release archive *inside* the
release archive, with git files removed, thus replicating
the same setup that the user would have.
This also makes everything a bit more consistent, because
it's guaranteed that a release archive will always have
the same files; previously, the release build script would
only copy what was already built, without building anything.
Now, this script builds everything itself.
The script also builds serprog images, not just coreboot.
Usage:
./update project release
If -d is not passed, release/ is used inside lbmk.
Otherwise, you could do:
./update project release -d /path/to/directory
If the directory exists, this script will exit (error).
Other minor fixes: build/fw/coreboot: make version in
coreboot-version (file) not contain hyphens, to work
around a quirk in coreboot's build system when not building
on regular libreboot releases. this quirk only appears
when lbmk is not being compiled under git.
The other main benefit of this change is that the new
script will probably require a lot less maintenance.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the script used to be called once per target, now it
handles every target. the grub background image wasn't
being set, so if it changed at build time, it would
stay changed.
keep the default in place for each run, while still
allowing target.cfg files to change it per target.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
