summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-10-13build/release: support skipping rom buildsLeah Rowe
pass this argument: -m src by doing this, only the src tarball will be made Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-13update/release: make src tarball first, then romsLeah Rowe
this way, the src tarball is guaranteed to be clean. the downside is that lbmk itself does not currently handle crossgcc downloads, and there may be some stragglers such as third party modules automatically downloaded by certain codebases that libreboot uses. this will have to be audited later (and it will be). Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-13put space in the warning message about elf/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-13only build cbutils if requiredLeah Rowe
it's sometimes done unconditionally. this change ensures that it is not repeated needlessly. i observed otherwise that cbfstool would be re-built from time to time, even if it was built. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12util/e6400-flash-unlock: Rename to dell-flash-unlockNicholas Chin
This more accurately describes the scope of the utility. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-10-12coreboot/default bump: rev d862695f5f, 12 Oct 2023Leah Rowe
Riku's mSATA patch for HP8300USDT was merged upstream, so the patch has been dropped from lbmk because it is contained within this new coreboot revision. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12use me_cleaner from coreboot instead of upstreamLeah Rowe
coreboot closely matches upstream, whose current release is version 1.2 from 2018, and coreboot has not changed it in any meaningful way. the upstream did add patches since, but they are documentation patches only. this means: we do not need to use the upstream version Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12nvmutil: simplify endianness handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12nvmutil: don't reset errno before writeLeah Rowe
under the current logic, errno would be ECANCELED if neither checksum is valid, or I/O related if pwrite fails; alternatively, the for loop exits and the file has been written, where it is quite correctly reset already. ergo, the errno reset at the start of writeGbeFile is superfluous. remove this bloat. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12nvmutil: reset errno on successful writeLeah Rowe
previously, a bad checksum would have caused a non-zero exit, even if the other checksum was correct (observed when using the swap command) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12nvmutil: simplify prototype declarationsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10build: fix bad command in help textLeah Rowe
lbmk was massively re-written, very recently. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10build/fw/coreboot: fix bad commands in help textLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10fix warning about coreboot elf/ vs bin/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10Merge pull request 'util/e6400-flash-unlock: Update to upstream version' ↵Leah Rowe
(#134) from nic3-14159/lbmk:e6400-flash-unlock-updates into master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/134
2023-10-10build/fw/coreboot: warning about bin/ versus elf/Leah Rowe
also rename elf/coreboot to something scary some users were flashing roms built under elf/, which lack payloads. lbmk builds no-payload roms (and payloads) under elf/ then inserts them, creating full (flashable) images under bin/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09util/e6400-flash-unlock: Update to upstream versionNicholas Chin
This updates lbmk's copy of e6400-flash-unlock to commit c5567fece479 (README.md: Update with info about broader device support) in my upstream repo. Changes: - Theoretical support for any Dell system that implements that flash descriptor override command. This is done by reading base address registers at runtime instead of hard coding them for specific devices. Tested on the Latitude E6400 and Latitude E6430. - Support for OpenBSD. It compiles, runs, and behaves as expected, though I have not actually tested internally flashing with flashrom yet. It should work though, as the program checks if the descriptor override is set and the BIOS Write Enable is able to be set to 1, which is all that is needed to internal flash. - Integrated changes made in the lbmk copy - Moved operating system accessor implementations to their own file It should be fully functional, though minor formatting and cleanup changes are still planned. Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
2023-10-10config/dependencies: fix unifont on arch/parabolaLeah Rowe
it's unarchiver in repos. not unar. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09include/err.sh: don't run check_gitLeah Rowe
it's already executed in "build" running it in err.sh makes the user have to set git name/email as root, when running dependencies scripts. this is a regression, that this patch fixes. git isn't needed to install dependencies. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies/ubuntu: symlink to debianLeah Rowe
this is for the latest ubuntu release. the ubuntu2004 config (for ubuntu 20.04) still exists, and will remain in place. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies: add popos configLeah Rowe
symlinked to the debian config Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09config/dependencies/debian: add autopointLeah Rowe
a user installed these dependencies in popos, but autopoint was missing during the grub build. add autopoint to the debian dependencies config. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-09disable 32-bit memtest86plus, only build 64-bitLeah Rowe
some users reported build errors. technically, there's nothing wrong with lbmk but it relies on hostcc, and hostcc is hit or miss when it comes to cross compiling 32-bit, depending on the build system of whatever project. lbmk needs to handle cross compilation. for now, i'm just disabling memtest86plus on non-64-bit hosts. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-08update/release/*: merge to update/project/releaseLeah Rowe
The logic has been re-written, where source archives are concerned. This clones the current repository, and starts a new build from scratch. A custom release directory is possible, by passing -d This eliminates a step during build-testing, saving hours of time, because it builds the release archive *inside* the release archive, with git files removed, thus replicating the same setup that the user would have. This also makes everything a bit more consistent, because it's guaranteed that a release archive will always have the same files; previously, the release build script would only copy what was already built, without building anything. Now, this script builds everything itself. The script also builds serprog images, not just coreboot. Usage: ./update project release If -d is not passed, release/ is used inside lbmk. Otherwise, you could do: ./update project release -d /path/to/directory If the directory exists, this script will exit (error). Other minor fixes: build/fw/coreboot: make version in coreboot-version (file) not contain hyphens, to work around a quirk in coreboot's build system when not building on regular libreboot releases. this quirk only appears when lbmk is not being compiled under git. The other main benefit of this change is that the new script will probably require a lot less maintenance. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/fw/coreboot: reset grub background each timeLeah Rowe
the script used to be called once per target, now it handles every target. the grub background image wasn't being set, so if it changed at build time, it would stay changed. keep the default in place for each run, while still allowing target.cfg files to change it per target. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/release/roms: copy license files to archiveLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07bump grub revisionLeah Rowe
most of the changes since last revision aren't very useful to us; most of them pertain to fs/ntfs, but there is one that is interesting: 48f569c78a496d3e11a4605b0999bc34fa5bc977 kern/acpi: Skip NULL entries in RSDT and XSDT Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07bump seabios revisionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/project/*: merge to update/project/treesLeah Rowe
Just one script. Just one! Well, two, but the 2nd one already existed: logic in update/project/trees and update/project/repo was merged into include/git.sh and update/project/build was renamed to update/project/trees; an -f option was added, which calls the functions under git.sh so git clones are now handled by the main build script (for handling makefiles and defconfigs) but the logic there is a stub, where git.sh does all the actual heavy lifting this cuts the file count down by two, and reduces sloccount a reasonable amount because much of the logic already exists in the build script, when it comes to handling targets. git.sh was adjusted to integrate with this, rather than act standalone Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/project/trees: handle seen in fetch_configLeah Rowe
I'm planning to re-use this function later, in other files, to unify handling of target.cfg files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/fw/grub: re-add end confirmation messageLeah Rowe
otherwise, if src/grub/ was already compiled, this would not print anything on the screen. however, the files will have been created under elf/grub this message just makes lbmk a bit more user friendly Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/coreboot/grub: move to build/fw/grubLeah Rowe
This eliminates an additional subdirectory. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07use quotes when checking empty strings in scriptsLeah Rowe
this is far less error-prone Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/fw/coreboot: fix error "unexpected operator"Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/project/build: move helpers to option.shLeah Rowe
certain functions are better placed there, rather than in the main script Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/coreboot/util: merge to update/project/buildLeah Rowe
The benefit now is that it can be cleaned. E.g. ./update project build -b coreboot utils ./update project build -b coreboot utils default ./update project build -c coreboot utils ./update project build -c coreboot utils default the update/project/build script checks when arguments are provided after the project name. if the first one is "utils", then it acts in the same way as the old build/coreboot/util script Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/fw/coreboot: don't support no-all all argLeah Rowe
it's buggy. "./build fw coreboot" was made to work, but it caused lots of unknown issues when mixing other args the old way wasn't broken. now, once again, you must pass the "all" argument. e.g.: ./build fw coreboot all Also, the confirmation messages at the end are a bit clearer, when listing which ROM images were compiled. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/fw/coreboot: correctly check built targetsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07unified projectname/version/versiondate handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07put include/export.sh in build scriptLeah Rowe
remove include/export.sh it's not a lot of code, and build is the only file that uses it Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07rename blob/ to vendor/Leah Rowe
in the future, we may start downloading files that aren't blobs, such as mxm port configs (on mainboards that use MXM graphics) this directory will contain all of those files generally change the language used, across lbmk, to make use of "vendorfile" instead of "blob" Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/blobs: correct utils paths checkLeah Rowe
some utils were being needlessly re-downloaded. fix that! Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/blobs: don't hardcode kbc1126 util checkLeah Rowe
use the variable that is set up in blobutil.sh Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/blobs: don't needlessly re-build uefitoolLeah Rowe
during the switch to src/ for all downloads, i overlooked that the path check was hardcoded. now the check for this binary is corrected. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07Rename blobs/ to blob/Leah Rowe
We don't have a directory names "srces", just "src". Ditto ecs, mrcs <-- it's just ec and mrc When referring to a file, e.g. blob/t1650/me.bin, that makes much more sense, because it's a single blob, not multiple blobs. Don't pluralise what isn't plural Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07put all src downloads under src/Leah Rowe
build/release/src was partly re-written to accomodate this memtest86plus was patched to have a central Makefile, and lbmk modified to use that, rather than mess with build32 and build64. the central Makefile just builds both targets or cleans both targets Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-06rename build/firmware/ to build/fw/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-06build/firmware/coreboot: confirm compiled romsLeah Rowe
return with error status if no images were compiled if a rom image fails to compile, then it will also exit with error status, but sometimes you can pass argument "cros" or "default", and it would not give you rom images due to no target.cfg files, but these are also ignored because of that. this restores the same behaviour that existed before, for this final error check. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-06build/firmware/coreboot: support "all" without allLeah Rowe
with no argument specified, it is now possible to build every rom image. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-06move build/release/* to update/releaseLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>