diff options
Diffstat (limited to 'script')
| -rwxr-xr-x | script/roms | 194 | ||||
| -rwxr-xr-x | script/trees | 257 |
2 files changed, 104 insertions, 347 deletions
diff --git a/script/roms b/script/roms deleted file mode 100755 index 359d5725..00000000 --- a/script/roms +++ /dev/null @@ -1,194 +0,0 @@ -#!/usr/bin/env sh -# SPDX-License-Identifier: GPL-3.0-or-later -# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> -# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> -# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com> -# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com> -# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com> - -set -u -e - -. "include/lib.sh" - -tmprom="$TMPDIR/rom" - -seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin" -cfgsdir="config/coreboot" -rp2040src="src/pico-serprog" -rp2040x="$rp2040src/build/pico_serprog.uf2" -picosdk="src/pico-sdk" -rp2040dir="$picosdk/src/boards/include/boards" -stm32src="src/stm32-vserprog" -stm32x="$stm32src/stm32-vserprog.hex" -stm32dir="$stm32src/boards" - -# Disable all payloads by default. -# target.cfg files have to specifically enable [a] payload(s) -pv="payload_uboot payload_seabios payload_memtest payload_grub" -v="romdir initmode displaymode targetdir tree release ubootelf" -v="$v board grub_scan_disk uboot_config grubtree grubelf tmpmv" -eval `setvars "n" $pv` -eval `setvars "" $v boards targets serdir ser` - -main() -{ - while [ $# -gt 0 ]; do - if [ "$1" = "serprog" ]; then - [ $# -lt 2 ] && $err "serprog type not set" - [ "$2" != "rp2040" ] && [ "$2" != "stm32" ] && \ - $err "invalid serprog type" - eval "x_ ./update trees -f \"\${${2}src##*/}\"" - ser="$2" && shift 2 && continue - fi - [ "$1$ser" = "list" ] && x_ ls -1 config/coreboot && return 0 - [ "$1" = "all" ] && shift 1 && continue - boards="$1 $boards"; shift 1 - done - - [ -n "$boards" ] || [ -n "$ser" ] || boards="$(ls -1 \ - config/coreboot)" || $err "can't list coreboot boards" - - [ -n "$ser" ] && \ - eval "serlist \"\$${ser}dir\" > \"\$TMPDIR/ser\" || $err \"!ser\"" - [ -n "$ser" ] && [ -z "$boards" ] && boards="$(cat "$TMPDIR/ser")" - - for x in $boards; do - [ -n "$ser" ] && mkserprogfw "$ser" "$x" - [ -z "$ser" ] && [ -d "config/coreboot/$x/config" ] && \ - configure_target "$x" && build_roms && \ - [ -d "bin/$board" ] && targets="$targets, $x" && \ - [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/$x" - done - - [ -n "$ser" ] && [ "$XBMK_RELEASE" = "y" ] && \ - mkrom_tarball "bin/serprog_$ser" && return 0 - - [ -z "$ser" ] && [ -z "$targets" ] && $err "No images were compiled" - [ -z "$ser" ] && printf "ROMs built in bin/ for: %s\n" "${targets#, }" - [ -n "$ser" ] && printf "ROMs (serprog) built in bin/%s/\n" "$ser" - printf "Please flash from bin/, NOT elf/ - ALSO:\n%s\n" "$kbnotice" -} - -mkserprogfw() -{ - x_ mkdir -p "bin/serprog_$1" - [ "$1" = "rp2040" ] && x_ cmake -DPICO_BOARD="$2" \ - -DPICO_SDK_PATH="$picosdk" -B "$rp2040src/build" "$rp2040src" && \ - x_ cmake --build "$rp2040src/build" - [ "$1" = "stm32" ] && x_ make -C "$stm32src" libopencm3-just-make \ - BOARD=$2 && x_ make -C "$stm32src" BOARD=$2 - eval "x_ mv \"\$${1}x\" \"bin/serprog_$1/serprog_$2.\${${1}x##*.}\"" -} - -serlist() -{ - basename -a -s .h "$1/"*.h || $err "$1: can't list boards" -} - -configure_target() -{ - eval `setvars "n" $pv` - eval `setvars "" $v` - - board="$1"; targetdir="$cfgsdir/$board"; romdir="bin/$board" - - # Override the above defaults using target.cfg - eval `setcfg "$targetdir/target.cfg"` - - [ -z "$tree" ] && $err "$board: tree not defined" - [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1 - [ "$board" = "$tree" ] && return 1 - - x_ ./update trees -b coreboot $board - - cbfstool="elf/cbfstool/$tree/cbfstool" - x_ ./update trees -b coreboot utils $tree - - [ -n "$uboot_config" ] || uboot_config="default" - [ "$payload_uboot" = "y" ] || payload_seabios="y" - [ "$payload_grub" = "y" ] && payload_seabios="y" - [ "$payload_seabios" = "y" ] && [ -n "$payload_uboot" = "y" ] && \ - $err "$board: U-Boot and SeaBIOS/GRUB are both enabled." - - [ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata" - - [ -n "$grubtree" ] || grubtree="default" - grubelf="elf/grub/$grubtree/payload/grub.elf" - - [ "$payload_memtest" = "y" ] || payload_memtest="n" - [ "$(uname -m)" = "x86_64" ] || payload_memtest="n"; return 0 -} - -build_roms() -{ - x_ rm -Rf "$romdir" - - for cbcfg in "$targetdir/config/"*; do - [ -f "$cbcfg" ] || continue; cn="${cbcfg##*/}"; dt="${cn#*_}" \ - && [ "$dt" = "$cn" ] && dt="txtmode"; displaymode="$dt" - initmode="${cn%%_*}"; chkvars initmode displaymode - e "$cbcfg" f not || add_payloads - done; x_ rm -f "$tmprom" -} - -add_payloads() -{ - cbuild="$cbelfdir/$board/${initmode}_$displaymode" - [ "$initmode" = "normal" ] && cbuild="${cbuild%"_$displaymode"}" - x_ cp "$cbuild/coreboot.rom" "$tmprom" - - [ "$payload_seabios" = "y" ] && add_seabios_payload - [ "$payload_uboot" = "y" ] || return 0 - - # add u-boot payload - x_ ./update trees -b u-boot $board - ubdir="elf/u-boot/$board/$uboot_config"; ubootelf="$ubdir/u-boot.elf" \ - && [ ! -f "$ubootelf" ] && ubootelf="$ubdir/u-boot" - [ -f "$ubootelf" ] || $err "$board: Can't find u-boot" - - cbfs "$tmprom" "$ubootelf" "fallback/payload" - cprom "$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom" -} - -add_seabios_payload() -{ - _seabioself="elf/seabios/default/$initmode/bios.bin.elf" - x_ ./update trees -b seabios - - pstr="seabios" && [ "$payload_grub" = "y" ] && pstr="seabios_withgrub" - newrom="$romdir/${pstr}_${board}_$initmode.rom" - [ "$initmode" = "normal" ] || newrom="${newrom%.rom}_$displaymode.rom" - - cbfs "$tmprom" "$_seabioself" "fallback/payload" - x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup - - z="2"; [ "$initmode" = "vgarom" ] && z="0" - x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec - x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum - [ "$initmode" = "libgfxinit" ] && cbfs "$tmprom" "$seavgabiosrom" \ - vgaroms/seavgabios.bin raw - - if [ "$payload_grub" = "y" ]; then - x_ ./update trees -b grub $grubtree - cbfs "$tmprom" "$grubelf" "img/grub2" - printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \ - > "$TMPDIR/tmpcfg" || $err "$board: !insert scandisk" - cbfs "$tmprom" "$TMPDIR/tmpcfg" scan.cfg raw - fi - - [ "$payload_memtest" = "y" ] && x_ ./update trees -b memtest86plus && \ - cbfs "$tmprom" "elf/memtest86plus/memtest.bin" img/memtest - - cprom "$newrom" && [ "$payload_grub" = "y" ] && \ - cbfs "$tmprom" "$grubdata/bootorder" bootorder raw && \ - cprom "${newrom%.rom}_grubfirst.rom"; return 0 -} - -cprom() -{ - x_ mkdir -p "${1%/*}"; x_ cp "$tmprom" "$1" - [ "$XBMK_RELEASE" = "y" ] && mksha512sum "$1" "vendorhashes" && \ - x_ ./vendor inject -r "$1" -b "$board" -n nuke; return 0 -} - -main $@ diff --git a/script/trees b/script/trees index b5cf13f0..a260cf24 100755 --- a/script/trees +++ b/script/trees @@ -9,17 +9,18 @@ set -u -e . "include/lib.sh" . "include/git.sh" -cbmakeargs="UPDATED_SUBMODULES=1 CPUS=$XBMK_THREADS" -eval `setvars "" xarch cdir config cmakedir xlang mode makeargs elfdir xtree \ - project target target_dir targets tree _f target1 bootstrapargs mkhelper \ - autoconfargs config_name listfile autogenargs btype cmd` +eval `setvars "" xarch srcdir premake cmakedir xlang mode makeargs elfdir cmd \ + project target target_dir targets xtree _f release bootstrapargs mkhelper \ + autoconfargs listfile autogenargs btype tree rev tree_depend build_depend \ + defconfig postmake mkhelpercfg dry dest_dir` main() { - while getopts f:b:m:u:c:x:s:l:n: option; do + while getopts f:b:m:u:c:x:s:l:n:d: option; do [ -n "$_f" ] && $err "only one flag is permitted" - _f="$1" + _f="$1" && [ "$_f" = "-d" ] && dry=":" case "$1" in + -d) mode="" ;; -b) mode="" ;; -u) mode="oldconfig" ;; -m) mode="menuconfig" ;; @@ -31,129 +32,103 @@ main() -n) mode="nconfig" ;; *) $err "invalid option '-$option'" ;; esac - [ -n "${OPTARG+x}" ] || $err "OPTARG not set" + [ -z "${OPTARG+x}" ] && shift 1 && break project="${OPTARG#src/}"; shift 2 done [ -z "$_f" ] && $err "missing flag (-m/-u/-b/-c/-x/-f/-s/-l/-n)" - [ -z "$project" ] && $err "project name not specified" + [ -z "$project" ] && for p in $(ls -1 config/git); do + ./update trees $_f "$p" || $err "!./update trees $_f $p" + [ "$XBMK_RELEASE" != "y" ] || singletree "$p" || \ + x_ rm -Rf "src/$p/$p"; continue + done && return 1 [ -f "config/git/$project/pkg.cfg" ] || $err "'$project' not defined" - elfdir="elf/$project" - datadir="config/data/$project" - cfgsdir="config/$project" - listfile="$datadir/build.list" # needed on multi, optional on single + for d in "elf" "config/data" "config" "src"; do + eval "${d#*/}dir=\"$d/$project\"" + done; dest_dir="$elfdir" + listfile="$datadir/build.list" + [ -f "$listfile" ] || listfile="" # optional on all projects - remkdir "${tmpgit%/*}" - - cmd="build_targets" && singletree "$project" && cmd="build_project" - $cmd $@ + mkhelpercfg="$datadir/mkhelper.cfg" + e "$mkhelpercfg" f missing && mkhelpercfg="$TMPDIR/mkhelper.cfg" && \ + x_ touch "$mkhelpercfg" - [ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && return 0 + targets="$@" + cmd="build_targets $targets" && singletree "$project" && \ + cmd="build_project" - [ -f "$listfile" ] || return 0 - [ -z "$mode" ] && printf "\n\nOK! Check %s/\n\n" "$elfdir"; return 0 + remkdir "${tmpgit%/*}" } build_project() { - load_project_config "$cfgsdir" || return 0 - [ -f "$listfile" ] || listfile="" # optional on single-tree - - dest_dir="$elfdir" - [ ! -f "$listfile" ] || elfcheck || return 0 - - cdir="src/${project}" - x_ ./update trees -f "$project" + configure_project "$configdir" || return 0 + [ ! -f "$listfile" ] || $dry elfcheck || return 0 [ "$mode" = "distclean" ] && mode="clean" run_make_command || return 0 - [ -n "$mode" ] || copy_elf; return 0 + [ -n "$mode" ] || $dry copy_elf; return 0 } build_targets() { - [ "$elfdir" = "elf/coreboot" ] && elfdir="$cbelfdir" + [ -d "$configdir" ] || $err "directory, $configdir, does not exist" + [ $# -gt 0 ] || targets="$(ls -1 "$configdir")" || $err "!o $configdir" - [ -d "$cfgsdir" ] || $err "directory, $cfgsdir, does not exist" - [ -f "$listfile" ] || $err "list file, $listfile, does not exist" - - # Build for all targets if no argument is given - [ $# -gt 0 ] && target1="$1" - [ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && shift 1 - targets="$(ls -1 "$cfgsdir")" || $err "Can't get options for $cfgsdir" - [ $# -gt 0 ] && targets=$@ - - handle_targets -} - -handle_targets() -{ for x in $targets; do + [ "$x" = "list" ] && x_ ls -1 "config/$project" && \ + listfile="" && break target="$x" printf "'make %s', '%s', '%s'\n" "$mode" "$project" "$target" - [ "$project" != "coreboot" ] || [ -n "$mode" ] || \ - [ "$target1" = "utils" ] || x_ ./vendor download $target x_ handle_defconfig - done + [ -n "$mode" ] || [ -z "$postmake" ] || $postmake || \ + $err "$project/$target: !postmake: $postmake"; continue + done; return 0 } handle_defconfig() { - handle_src_tree "$target" || return 0 - - [ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && \ - eval "check_coreboot_utils \"$tree\"; return 0" - - for y in "$target_dir/config"/*; do - [ -f "$y" ] || continue - config="$y" - config_name="${config#"$target_dir/config/"}" - - [ -n "$mode" ] || check_config || continue - handle_makefile - [ -n "$mode" ] || copy_elf - done -} - -handle_src_tree() -{ - target_dir="$cfgsdir/$target" + target_dir="$configdir/$target" - load_project_config "$target_dir" || return 1 + [ -f "CHANGELOG" ] || fetch_project "$project" + configure_project "$target_dir" || return 0 x_ mkdir -p "$elfdir/$target" chkvars tree - cdir="src/$project/$tree" - - if [ ! -d "$cdir" ]; then - if [ "$mode" = "distclean" ] || \ - [ "$mode" = "crossgcc-clean" ]; then - printf "Dir '%s' missing; skip clean\n" "$cdir" 1>&2 - return 1 - fi - x_ ./update trees -f "$project" "$target" + srcdir="src/$project/$tree" + + if [ "$mode" = "distclean" ] || [ "$mode" = "crossgcc-clean" ]; then + [ -d "$srcdir" ] || return 0 fi + [ -z "$mode" ] && $dry check_cross_compiler + + for y in "$target_dir/config"/*; do + [ "$_f" = "-d" ] || [ -f "$y" ] || continue + [ "$_f" = "-d" ] || defconfig="$y" - [ "$target1" = "utils" ] && [ "$project" = "coreboot" ] && return 0 - [ -z "$mode" ] && check_cross_compiler; return 0 + [ -n "$mode" ] || check_defconfig || continue + handle_makefile + [ -n "$mode" ] || $dry copy_elf + done; return 0 } -load_project_config() +configure_project() { - eval `setvars "" xarch xlang bootstrapargs autoconfargs xtree \ - tree_depend makeargs btype mkhelper` + eval `setvars "" xarch xlang build_depend autoconfargs xtree postmake \ + tree_depend makeargs btype mkhelper bootstrapargs premake release` [ -f "$1/target.cfg" ] || btype="auto" + [ -f "$datadir/mkhelper.cfg" ] && eval `setcfg "$datadir/mkhelper.cfg"` _tcfg="$1/target.cfg" - while [ -f "$_tcfg" ] || [ "$cmd" = "build_targets" ]; do - # target.cfg optional on single-tree so return if missing. - # target.cfg mandatory on multi-tree so err if missing. + while [ -f "$_tcfg" ] || [ "$cmd" != "build_project" ]; do eval `setvars "" rev tree` printf "Loading %s config: %s\n" "$project" "$_tcfg" eval `setcfg "$_tcfg"` + + [ "$_f" = "-d" ] && build_depend="" # dry run [ "$cmd" = "build_project" ] && break [ "$mode" = "fetch" ] || break @@ -161,8 +136,20 @@ load_project_config() && break; _tcfg="${_tcfg%/*/target.cfg}/$tree/target.cfg" done + [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1 [ -z "$btype" ] || [ "${mode%config}" = "$mode" ] || return 1 + if [ -z "$mode" ]; then + for bd in $build_depend; do + bd_p="${bd%%/*}"; bd_t="${bd##*/}" + [ -z "$bd_p" ] && $dry $err "$project/$tree: !bd '$bd'" + [ "${bd##*/}" = "$bd" ] && bd_t="" + [ -z "$bd_p" ] || $dry ./update trees -b $bd_p $bd_t \ + || $err "!mk $project/$tree $bd_p/$bd_t" + done + fi + + [ "$mode" = "fetch" ] || x_ ./update trees -f "$project" $target [ "$mode" = "fetch" ] || return 0 [ -f "CHANGELOG" ] && return 1; fetch_${cmd#build_}; return 1 } @@ -181,35 +168,19 @@ check_cross_compiler() [ -n "$xlang" ] && export BUILD_LANGUAGES="$xlang" # sometimes buildgcc fails for like no reason. try twice. - make -C "$cbdir" crossgcc-${_xarch%-*} $cbmakeargs || \ - make -C "$cbdir" crossgcc-${_xarch%-*} $cbmakeargs || \ - $err "!mkxgcc $project/$xtree '${_xarch%-*}' '$cbmakeargs'" + make -C "$cbdir" crossgcc-${_xarch%-*} $makeargs || \ + make -C "$cbdir" crossgcc-${_xarch%-*} $makeargs || \ + $err "!mkxgcc $project/$xtree '${_xarch%-*}' '$makeargs'" done; return 0 } -check_coreboot_utils() +check_defconfig() { - for util in cbfstool ifdtool; do - utilelfdir="elf/$util/$1" - utilsrcdir="src/coreboot/$1/util/$util" - - utilmode="" && [ -n "$mode" ] && utilmode="clean" - x_ make -C "$utilsrcdir" $utilmode -j$XBMK_THREADS $cbmakeargs - [ -z "$mode" ] && [ ! -f "$utilelfdir/$util" ] && \ - x_ mkdir -p "$utilelfdir" && \ - x_ cp "$utilsrcdir/$util" "elf/$util/$1" - [ -z "$mode" ] || x_ rm -Rf "$utilelfdir" - done; return 0 -} - -check_config() -{ - [ -f "$config" ] || $err "check_config $project/$target: no config" - - dest_dir="$elfdir/$target/$config_name" - elfcheck || return 1 # skip build if a previous one exists + [ -f "$defconfig" ] || $dry $err "$project/$target: missing defconfig" + dest_dir="$elfdir/$target/${defconfig#"$target_dir/config/"}" - x_ mkdir -p "$dest_dir" + $dry elfcheck || return 1 # skip build if a previous one exists + $dry x_ mkdir -p "$dest_dir" } elfcheck() @@ -222,45 +193,41 @@ elfcheck() handle_makefile() { - check_makefile "$cdir" && x_ make clean -C "$cdir" - x_ cp "$config" "$cdir/.config" - [ -n "$mode" ] || [ -n "$btype" ] || make -C "$cdir" \ - silentoldconfig || make -C "$cdir" oldconfig || : + $dry check_makefile "$srcdir" && x_ make clean -C "$srcdir" + [ -f "$defconfig" ] && x_ cp "$defconfig" "$srcdir/.config" + [ -n "$mode" ] || [ -n "$btype" ] || $dry make -C \ + "$srcdir" silentoldconfig || make -C "$srcdir" oldconfig || : - run_make_command || $err "handle_makefile $cdir: no makefile!" + run_make_command || $err "handle_makefile $srcdir: no makefile!" - _copy=".config" - [ "$mode" = "savedefconfig" ] && _copy="defconfig" - [ "${mode%config}" = "$mode" ] || x_ cp "$cdir/$_copy" "$config" + _copy=".config" && [ "$mode" = "savedefconfig" ] && _copy="defconfig" + [ "${mode%config}" = "$mode" ] || \ + $dry x_ cp "$srcdir/$_copy" "$defconfig" - [ -e "$cdir/.git" ] && [ "$project" = "u-boot" ] && \ - [ "$mode" = "distclean" ] && x_ git -C "$cdir" clean -fdx; return 0 + [ -e "$srcdir/.git" ] && [ "$project" = "u-boot" ] && \ + [ "$mode" = "distclean" ] && $dry x_ git -C "$srcdir" clean -fdx; : } run_make_command() { - check_cmake "$cdir" && [ -z "$mode" ] && check_autoconf "$cdir" - check_makefile "$cdir" || return 1 + [ -z "$premake" ] || [ -n "$mode" ] || $premake || $err "!$premake" - [ "$project" = "coreboot" ] && [ -z "$mode" ] && x_ \ - printf "%s\n" "${version%%-*}" > "$cdir/.coreboot-version" \ - && makeargs="$makeargs $cbmakeargs" + $dry check_cmake "$srcdir" && [ -z "$mode" ] && $dry check_autoconf \ + "$srcdir"; $dry check_makefile "$srcdir" || return 1 - make -C "$cdir" $mode -j$XBMK_THREADS $makeargs || $err "$cdir mk$mode" + $dry make -C "$srcdir" $mode -j$XBMK_THREADS $makeargs || $err "!$mode" + [ -z "$mkhelper" ] || [ -n "$mode" ] || $mkhelper || $err "!$mkhelper" - [ -z "$mkhelper" ] || [ -n "$mode" ] || $mkhelper || \ - $err "$cdir: helper command failed: $mkhelper" # eg mkpayload_grub - - [ "$mode" != "clean" ] && return 0 - make -C "$cdir" distclean 2>/dev/null || : + [ "$mode" = "clean" ] && $dry make -C "$srcdir" distclean || :; : } check_cmake() { - [ -z "$cmakedir" ] || check_makefile "$1" || cmake -B "$1" \ - "$1/$cmakedir" || check_makefile "$1" || $err "$1: !cmk $cmakedir" - [ -z "$cmakedir" ] || check_makefile "$1" || \ - $err "check_cmake $1: can't generate Makefile"; return 0 + [ -z "$cmakedir" ] || $dry check_makefile "$1" || cmake -B "$1" \ + "$1/$cmakedir" || $dry check_makefile "$1" || $err \ + "$1: !cmk $cmakedir" + [ -z "$cmakedir" ] || $dry check_makefile "$1" || \ + $err "check_cmake $1: can't generate Makefile"; return 0 } check_autoconf() @@ -279,29 +246,13 @@ check_makefile() [ -f "$1/GNUmakefile" ] || return 1; return 0 } -mkpayload_grub() -{ - eval `setvars "" grub_modules grub_install_modules` - eval `setcfg "$grubdata/module/$tree"` - - x_ rm -f "$cdir/grub.elf" - - "${cdir}/grub-mkstandalone" --grub-mkimage="${cdir}/grub-mkimage" \ - -O i386-coreboot -o "${cdir}/grub.elf" -d "${cdir}/grub-core/" \ - --fonts= --themes= --locales= --modules="$grub_modules" \ - --install-modules="$grub_install_modules" \ - "/boot/grub/grub_default.cfg=${cdir}/.config" \ - "/boot/grub/grub.cfg=$grubdata/memdisk.cfg" \ - "/background.png=$grubdata/background/background1280x800.png" || \ - $err "$tree: cannot build grub.elf"; return 0 -} - copy_elf() { [ -f "$listfile" ] && x_ mkdir -p "$dest_dir" && while read -r f; do - [ -f "$cdir/$f" ] && x_ cp "$cdir/$f" "$dest_dir" - done < "$listfile" - x_ make clean -C "$cdir" + [ -f "$srcdir/$f" ] && x_ cp "$srcdir/$f" "$dest_dir" + done < "$listfile"; x_ make clean -C "$srcdir" } -main $@ +main $@ || exit 0 +. "$mkhelpercfg" +$cmd |