diff options
Diffstat (limited to 'script/roms')
| -rwxr-xr-x | script/roms | 443 |
1 files changed, 0 insertions, 443 deletions
diff --git a/script/roms b/script/roms deleted file mode 100755 index 3ccd8728..00000000 --- a/script/roms +++ /dev/null @@ -1,443 +0,0 @@ -#!/usr/bin/env sh -# SPDX-License-Identifier: GPL-3.0-or-later -# Copyright (c) 2014-2016,2020-2021,2023-2024 Leah Rowe <leah@libreboot.org> -# Copyright (c) 2021-2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> -# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com> -# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com> -# Copyright (c) 2023 Riku Viitanen <riku.viitanen@protonmail.com> - -set -u -e - -. "include/lib.sh" - -seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin" -grub_background="background1280x800.png" -cfgsdir="config/coreboot" -picosrc="src/pico-serprog" -picosdk="src/pico-sdk" -stm32src="src/stm32-vserprog" - -# Disable all payloads by default. -# target.cfg files have to specifically enable [a] payload(s) -pv="payload_uboot payload_grub_withseabios payload_seabios payload_memtest t" -pv="$pv payload_seabios_withgrub payload_seabios_grubonly payload_grub mt86bin" -v="romdir cbrom initmode displaymode cbcfg targetdir tree keymaps release" -v="$v grub_timeout ubdir board grub_scan_disk uboot_config grubtree grubelf" -eval "$(setvars "n" $pv serprog)" -eval "$(setvars "" $v boards _displaymode _payload _keyboard all targets \ - serprog_boards_dir _scandisk)" - -main() -{ - while [ $# -gt 0 ]; do - case "$1" in - list) x_ items config/coreboot; return 0 ;; - serprog) serprog="y"; shift 1; break ;; - -d) _displaymode="$2" ;; - -p) _payload="$2" ;; - -k) _keyboard="$2" ;; - -s) _scandisk="$2" ;; - *) - [ "$1" = "all" ] && all="y" - boards="$1 $boards" - shift && continue ;; - esac - shift 2 - done - - if [ "$serprog" = "y" ]; then - handle_serprog $@; return 0 - else - [ "$all" != "y" ] || boards="$(items config/coreboot)" || \ - $err "Cannot generate list of boards for building" - for x in $boards; do - [ -d "config/coreboot/$x/config" ] && \ - handle_coreboot_target "$x"; continue - done - fi - - x="directories" - [ "$xbmk_release" = "y" ] && x="archives (remember the inject command)" - - [ -z "$targets" ] && $err "No ROM images were compiled" - printf "\nROM images available in these %s:\n" "$x" - eval "printf \"$targets\"" - printf "^^ ROM images available in these %s.\n\n" "$x" - - printf "DO NOT flash images from elf/ - please use bin/ instead.\n" -} - -handle_serprog() -{ - [ -z "${1+x}" ] && badcmd - [ "$1" != "rp2040" ] && [ "$1" != "stm32" ] && $err "bad command" - if [ "$1" = "rp2040" ]; then - serprog_boards_dir="$picosdk/src/boards/include/boards" - [ -d "$picosrc" ] || x_ ./update trees -f "pico-serprog" - elif [ "$1" = "stm32" ]; then - serprog_boards_dir="$stm32src/boards" - [ -d "$stm32src" ] || x_ ./update trees -f "stm32-vserprog" - fi - x_ mkdir -p "bin/serprog_$1" - - if [ $# -gt 1 ] && [ "$2" = "list" ]; then - list_serprog_boards "$serprog_boards_dir" - return 0 - elif [ $# -gt 1 ]; then - build_${1}_rom "$2" - else - list_serprog_boards "$serprog_boards_dir" | \ - while read -r board; do - build_${1}_rom "$board" - done - fi - - [ "$xbmk_release" = "y" ] && mkrom_tarball "bin/serprog_$1"; return 0 -} - -build_rp2040_rom() -{ - board="$1" - printf "Building pico-serprog for %s\n" "$board" - x_ cmake -DPICO_BOARD="$board" -DPICO_SDK_PATH="$picosdk" \ - -B "$picosrc/build" "$picosrc" - x_ cmake --build "$picosrc/build" - x_ mv "$picosrc/build/pico_serprog.uf2" \ - "bin/serprog_rp2040/serprog_$board.uf2" - printf "output to bin/serprog_rp2040/serprog_%s.uf2\n" "$board" -} - -build_stm32_rom() -{ - board="$1" - printf "Building stm32-vserprog for %s\n" "$board" - x_ make -C "$stm32src" libopencm3-just-make BOARD=$board - x_ make -C "$stm32src" BOARD=$board - x_ mv "$stm32src/stm32-vserprog.hex" \ - "bin/serprog_stm32/serprog_$board.hex" - printf "output to bin/serprog_stm32/serprog_%s.hex\n" "$board" -} - -list_serprog_boards() -{ - basename -a -s .h "$1/"*.h || $err "$1: can't list boards" -} - -handle_coreboot_target() -{ - eval "$(setvars "n" $pv) $(setvars "" $v)" - grub_background="background1280x800.png" - board="$1" - - configure_target - [ "$board" = "$tree" ] && return 0 - [ "$xbmk_release" = "y" ] && [ "$release" = "n" ] && return 0 - - build_payloads - build_target_mainboard - - [ -d "bin/$board" ] || return 0 - [ "$xbmk_release" = "y" ] || targets="* bin/$board\n$targets" - [ "$xbmk_release" = "y" ] && mkrom_tarball "bin/$board" && \ - targets="* bin/${relname}_$board.tar.xz\n$targets"; return 0 -} - -configure_target() -{ - targetdir="$cfgsdir/$board" - [ -f "$targetdir/target.cfg" ] || $err "$board: target.cfg missing" - - # Override the above defaults using target.cfg - . "$targetdir/target.cfg" - - [ -n "$_scandisk" ] && grub_scan_disk="$_scandisk" - [ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata" - - eval "$(setvars "" _ata _ahci _nvme _grub_scan_disk)" - - for _disk in $grub_scan_disk; do - [ "$_disk" != "nvme" ] && [ "$_disk" != "ahci" ] && \ - [ "$_disk" != "ata" ] && _grub_scan_disk="nvme ahci ata" \ - && break - - [ -n "$_ata" ] && [ "$_disk" = "ata" ] && continue - [ -n "$_ahci" ] && [ "$_disk" = "ahci" ] && continue - [ -n "$_nvme" ] && [ "$_disk" = "nvme" ] && continue - - eval "_$_disk=\"$_disk\"" - _grub_scan_disk="$_grub_scan_disk $_disk" - done - [ -z "$_grub_scan_disk" ] && _grub_scan_disk="nvme ahci ata" - grub_scan_disk="${_grub_scan_disk# }" - - [ -n "$grubtree" ] || grubtree="default" - grubelf="elf/grub/$grubtree/payload/grub.elf" - - [ -z "$tree" ] && $err "$board: tree not defined" - - [ "$payload_memtest" != "y" ] && payload_memtest="n" - [ "$(uname -m)" = "x86_64" ] || payload_memtest="n" - - [ "$payload_grub_withseabios" = "y" ] && payload_grub="y" - [ "$payload_grub_withseabios" = "y" ] && \ - eval "$(setvars "y" payload_seabios payload_seabios_withgrub)" - [ "$payload_seabios_withgrub" = "y" ] && payload_seabios="y" - [ "$payload_seabios_grubonly" = "y" ] && payload_seabios="y" - [ "$payload_seabios_grubonly" = "y" ] && payload_seabios_withgrub="y" - - # The reverse logic must not be applied. If SeaBIOS-with-GRUB works, - # that doesn't mean GRUB-with-SeaBIOS will, e.g. VGA ROM execution - [ "$payload_grub" != "y" ] && [ "$payload_seabios" != "y" ] && \ - [ "$payload_uboot" != "y" ] && $err "'$board' defines no payload" - - [ "$payload_uboot" != "n" ] && [ "$payload_uboot" != "y" ] && \ - payload_uboot="n" - [ "$payload_uboot" = "y" ] && [ -z "$uboot_config" ] && \ - uboot_config="default" - - # Override all payload directives with cmdline args - [ -z "$_payload" ] && return 0 - eval "$(setvars "n" payload_grub payload_memtest payload_seabios \ - payload_seabios_withgrub payload_uboot payload_grub_withseabios \ - payload_seabios_grubonly)" - eval "payload_$_payload=y" -} - -build_payloads() -{ - romdir="bin/$board" - cbdir="src/coreboot/$board" - [ "$board" = "$tree" ] || cbdir="src/coreboot/$tree" - cbfstool="elf/cbfstool/$tree/cbfstool" - cbrom="$cbdir/build/coreboot.rom" - - [ -f "$cbfstool" ] || x_ ./update trees -b coreboot utils $tree - - mt86bin="elf/memtest86plus/memtest.bin" - [ "$payload_memtest" != "y" ] || [ -f "$mt86bin" ] || \ - x_ ./update trees -b memtest86plus - - [ "$payload_seabios" = "y" ] && x_ ./update trees -b seabios - if [ "$payload_grub" = "y" ] || [ "$payload_seabios_withgrub" = "y" ] \ - || [ "$payload_seabios_grubonly" = "y" ]; then build_grub_payload - fi - [ "$payload_uboot" = "y" ] && build_uboot_payload; return 0 -} - -build_grub_payload() -{ - for keymapfile in "$grubdata/keymap/"*.gkb; do - [ -f "$keymapfile" ] && keymaps="$keymaps $keymapfile" - done - [ -z "$_keyboard" ] || [ -f "$grubdata/keymap/$_keyboard.gkb" ] || \ - $err "build_grub_payload: $_keyboard layout not defined" - [ -n "$_keyboard" ] && keymaps="$grubdata/keymap/$_keyboard.gkb" - - [ -f "$grubelf" ] || x_ ./update trees -b grub $grubtree; return 0 -} - -build_uboot_payload() -{ - x_ ./update trees -b u-boot $board - ubdir="elf/u-boot/$board/$uboot_config" - ubootelf="$ubdir/u-boot.elf" - [ ! -f "$ubootelf" ] && [ -f "$ubdir/u-boot" ] && \ - ubootelf="$ubdir/u-boot" - [ -f "$ubootelf" ] || $err "$board: Can't find u-boot"; return 0 -} - -build_target_mainboard() -{ - x_ rm -Rf "$romdir" - - for x in "normal" "vgarom" "libgfxinit"; do - initmode="$x" - hmode="vesafb" - [ "$initmode" = "vgarom" ] || hmode="corebootfb" - modes="$hmode txtmode" - [ -z "$_displaymode" ] || modes="$_displaymode" - for y in $modes; do - displaymode="$y" - [ "$initmode" = "normal" ] && \ - [ "$displaymode" != "txtmode" ] && continue - cbcfg="$targetdir/config/${initmode}_$displaymode" - [ "$initmode" = "normal" ] && cbcfg="${cbcfg%_*}" - build_roms "$cbcfg"; x_ rm -f "$cbrom" - done - done -} - -build_roms() -{ - cbcfg="$1" - e "$cbcfg" f not && return 0 - - x_ ./update trees -b coreboot $board - - _cbrom="elf/coreboot_nopayload_DO_NOT_FLASH" - _cbrom="$_cbrom/$board/${initmode}_$displaymode" - [ "$initmode" = "normal" ] && _cbrom="${_cbrom%"_$displaymode"}" - _cbrom="$_cbrom/coreboot.rom" - cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - x_ cp "$_cbrom" "$cbrom" - - [ "$payload_memtest" != "y" ] || x_ "$cbfstool" "$cbrom" add-payload \ - -f "$mt86bin" -n img/memtest -c lzma - [ "$payload_seabios" = "y" ] && build_seabios_roms - [ "$payload_grub" != "y" ] || x_ build_grub_roms "$cbrom" "grub" - [ "$payload_uboot" = "y" ] || return 0 - x_ cp "$_cbrom" "$cbrom" - build_uboot_roms -} - -build_seabios_roms() -{ - if [ "$payload_seabios_withgrub" = "y" ]; then - t="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - x_ cp "$cbrom" "$t" - x_ build_grub_roms "$t" "seabios_withgrub" - else - t="$(mkSeabiosRom "$cbrom" "fallback/payload")" || \ - $err "build_seabios_roms: cannot build tmprom" - newrom="$romdir/seabios_${board}_${initmode}_$displaymode" - [ "$initmode" = "normal" ] && newrom="$romdir/seabios" \ - && newrom="${newrom}_${board}_$initmode" - x_ cprom "$t" "$newrom.rom" - fi - x_ rm -f "$t" -} - -# Make separate ROM images with GRUB payload, for each supported keymap -build_grub_roms() -{ - tmprom="$1" - payload1="$2" # allow values: grub, seabios, seabios_withgrub - - grub_cbfs="fallback/payload" - if [ "$payload1" = "grub" ] && [ "$payload_grub_withseabios" = "y" ] - then - _tmpmvrom="$(mkSeabiosRom "$tmprom" "seabios.elf")" || \ - $err "build_grub_roms 1 $board: can't build tmprom" - x_ mv "$_tmpmvrom" "$tmprom" - elif [ "$payload1" != "grub" ] && [ "$payload_seabios_withgrub" = "y" ] - then - grub_cbfs="img/grub2" - _tmpmvrom="$(mkSeabiosRom "$tmprom" fallback/payload)" || \ - $err "build_grub_roms 2 $board: can't build tmprom" - x_ mv "$_tmpmvrom" "$tmprom" - fi - - # we only need insert grub.elf once, for each coreboot config: - x_ "$cbfstool" "$tmprom" add-payload -f "$grubelf" \ - -n "$grub_cbfs" -c lzma - - # we only need insert background.png once, for each coreboot config: - if [ "$displaymode" = "vesafb" ] || \ - [ "$displaymode" = "corebootfb" ]; then - backgroundfile="$grubdata/background/$grub_background" - "$cbfstool" "$tmprom" add -f "$backgroundfile" -n \ - background.png -t raw || $err "!bg, $backgroundfile" - fi - - tmpcfg="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" > "$tmpcfg" || \ - $err "set grub_scandisk, $grub_scan_disk, $tmpcfg" - x_ "$cbfstool" "$tmprom" add -f "$tmpcfg" -n scan.cfg -t raw - printf "set timeout=%s\n" "$grub_timeout" > "$tmpcfg" || \ - $err "set timeout, $grub_timeout, $tmpcfg" - [ -z "$grub_timeout" ] || x_ "$cbfstool" "$tmprom" add \ - -f "$tmpcfg" -n timeout.cfg -t raw - x_ rm -f "$tmpcfg" - - for keymapfile in $keymaps; do - [ -f "$keymapfile" ] || continue - keymap="${keymapfile##*/}" - keymap="${keymap%.gkb}" - - tmpgrubrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - x_ cp "$tmprom" "$tmpgrubrom" - x_ "$cbfstool" "$tmpgrubrom" add -f "$keymapfile" \ - -n keymap.gkb -t raw - - newrom="$romdir/${payload1}_${board}_${initmode}_" - newrom="$newrom${displaymode}_$keymap.rom" - [ "$initmode" = "normal" ] && newrom="$romdir/${payload1}_" \ - && newrom="$newrom${board}_${initmode}_$keymap.rom" - x_ cprom "$tmpgrubrom" "$newrom" - if [ "$payload_seabios_withgrub" = "y" ] && \ - [ "$payload1" != "grub" ]; then - x_ "$cbfstool" "$tmpgrubrom" add \ - -f "$grubdata/bootorder" -n bootorder -t raw - x_ cprom "$tmpgrubrom" "${newrom%.rom}_grubfirst.rom" - if [ "$payload_seabios_grubonly" = "y" ]; then - x_ "$cbfstool" "$tmpgrubrom" add-int -i 0 \ - -n etc/show-boot-menu - x_ cprom "$tmpgrubrom" \ - "${newrom%.rom}_grubonly.rom" - fi - fi - x_ rm -f "$tmpgrubrom" - done -} - -# make a rom in /tmp/ and then print the path of that ROM -mkSeabiosRom() { - _cbrom="$1" # rom to insert seabios in. will not be touched - # (a tmpfile will be made instead) - _seabios_cbfs_path="$2" # e.g. fallback/payload - _seabioself="elf/seabios/default/$initmode/bios.bin.elf" - tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - - x_ cp "$_cbrom" "$tmprom" - x_ "$cbfstool" "$tmprom" add-payload -f "$_seabioself" \ - -n "$_seabios_cbfs_path" -c lzma - x_ "$cbfstool" "$tmprom" add-int -i 3000 -n etc/ps2-keyboard-spinup - - z="2"; [ "$initmode" = "vgarom" ] && z="0" - x_ "$cbfstool" "$tmprom" add-int -i $z -n etc/pci-optionrom-exec - x_ "$cbfstool" "$tmprom" add-int -i 0 -n etc/optionroms-checksum - [ "$initmode" != "libgfxinit" ] || x_ "$cbfstool" "$tmprom" add -f \ - "$seavgabiosrom" -n vgaroms/seavgabios.bin -t raw - - printf "%s\n" "$tmprom" -} - -build_uboot_roms() -{ - tmprom="$(mkUbootRom "$cbrom" "fallback/payload")" || \ - $err "build_uboot_roms $board: could not create tmprom" - newrom="$romdir/uboot_payload_${board}_${initmode}_$displaymode.rom" - x_ cprom "$tmprom" "$newrom" - x_ rm -f "$tmprom" -} - -# make a rom in /tmp/ and then print the path of that ROM -mkUbootRom() { - _cbrom="$1" - _uboot_cbfs_path="$2" - - _ubdir="elf/u-boot/$board/$uboot_config" - _ubootelf="$_ubdir/u-boot.elf" - [ -f "$_ubootelf" ] || _ubootelf="$_ubdir/u-boot" - [ -f "$_ubootelf" ] || $err "mkUbootRom: $board: cant find u-boot" - - tmprom="$(mktemp -t coreboot_rom.XXXXXXXXXX)" - - x_ cp "$_cbrom" "$tmprom" - x_ "$cbfstool" "$tmprom" add-payload -f "$_ubootelf" \ - -n "$_uboot_cbfs_path" -c lzma - - printf "%s\n" "$tmprom" -} - -cprom() -{ - printf "Creating target image: %s\n" "$2" - - x_ mkdir -p "${2%/*}" - x_ cp "$1" "$2" - [ "$xbmk_release" = "y" ] && mksha512sum "$2" "vendorhashes" && \ - x_ ./vendor inject -r "$2" -b "$board" -n nuke; return 0 -} - -main $@ |