summaryrefslogtreecommitdiff
path: root/script/build/firmware
diff options
context:
space:
mode:
Diffstat (limited to 'script/build/firmware')
-rwxr-xr-xscript/build/firmware/coreboot415
-rwxr-xr-xscript/build/firmware/serprog80
2 files changed, 0 insertions, 495 deletions
diff --git a/script/build/firmware/coreboot b/script/build/firmware/coreboot
deleted file mode 100755
index 15430255..00000000
--- a/script/build/firmware/coreboot
+++ /dev/null
@@ -1,415 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-or-later
-# SPDX-FileCopyrightText: 2014-2016,2020,2021,2023 Leah Rowe <leah@libreboot.org>
-# SPDX-FileCopyrightText: 2021,2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
-# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com>
-# SPDX-FileCopyrightText: 2022 Alper Nebi Yasak <alpernebiyasak@gmail.com>
-# SPDX-FileCopyrightText: 2023 Riku Viitanen <riku.viitanen@protonmail.com>
-
-[ "x${DEBUG+set}" = 'xset' ] && set -v
-set -u -e
-
-. "include/err.sh"
-. "include/option.sh"
-
-read projectname < projectname
-
-seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
-grub_background="background1280x800.png"
-grubelf="elf/grub/grub.elf"
-cfgsdir="config/coreboot"
-kmapdir="config/grub/keymap"
-
-# Disable all payloads by default.
-# target.cfg files have to specifically enable [a] payload(s)
-pv="payload_grub payload_grub_withseabios payload_seabios payload_memtest"
-pv="${pv} payload_seabios_withgrub payload_uboot"
-v="romdir cbdir cbfstool cbrom initmode displaymode cbcfg targetdir tree arch"
-v="${v} grub_timeout ubdir blobs_required board grub_scan_disk uboot_config"
-eval "$(setvars "n" ${pv})"
-eval "$(setvars "" ${v})"
-eval "$(setvars "" boards _displaymode _payload _keyboard all targets)"
-
-main()
-{
- while [ $# -gt 0 ]; do
- case ${1} in
- help) usage && exit 0 ;;
- list) listitems config/coreboot && exit 0 ;;
- -d) _displaymode="${2}" ;;
- -p) _payload="${2}" ;;
- -k) _keyboard="${2}" ;;
- *)
- [ "${1}" = "all" ] && all="y"
- boards="${1} ${boards}"
- shift && continue ;;
- esac
- shift 2
- done
-
- [ "${all}" = "y" ] && boards=""
- [ ! -z ${boards} ] || boards=$(listitems config/coreboot) || \
- err "Cannot generate list of boards for building"
-
- for x in ${boards}; do
- eval "$(setvars "n" ${pv})"
- eval "$(setvars "" ${v})"
- board="${x}"
- check_target
- prepare_target
- [ -f "bin/${x}" ] || continue
- targets="bin/${x}\n${targets}"
- done
-
- [ -z ${targets} ] && err "No ROM images were compiled"
- printf "ROM images available in these directories:\n${targets%, }\n"
-}
-
-check_target()
-{
- targetdir="${cfgsdir}/${board}"
- [ -f "${targetdir}/target.cfg" ] || \
- err "Missing target.cfg for target: ${board}"
-
- # Override the above defaults using target.cfg
- . "${targetdir}/target.cfg"
-
- [ -z ${grub_scan_disk} ] && \
- grub_scan_disk="both"
- [ "${grub_scan_disk}" != "both" ] && [ "${grub_scan_disk}" != "ata" ] \
- && [ "${grub_scan_disk}" != "ahci" ] && \
- grub_scan_disk="both"
-
- [ -z ${tree} ] && \
- err "Target '${board}' defines no tree. Skipping build."
- [ -z ${arch} ] && \
- err "Target '${board}' defines no arch. Skipping build."
-
- [ "${payload_memtest}" != "y" ] && \
- payload_memtest="n"
- [ "${payload_grub_withseabios}" = "y" ] && \
- payload_grub="y"
- [ "${payload_grub_withseabios}" = "y" ] && \
- eval "$(setvars "y" payload_seabios payload_seabios_withgrub)"
- [ "${payload_seabios_withgrub}" = "y" ] && \
- payload_seabios="y"
-
- # The reverse logic must not be applied. If SeaBIOS-with-GRUB works,
- # that doesn't mean GRUB-withSeaBIOS will. For example, the board
- # might have a graphics card whose vga rom coreboot doesn't execute
- [ "${payload_grub}" != "y" ] && [ "${payload_seabios}" != "y" ] && \
- [ "${payload_uboot}" != "y" ] && \
- for configfile in "${targetdir}/config/"*; do
- [ -e "${configfile}" ] || continue
- err "target '${board}' defines no payload"
- done
-
- [ "${payload_uboot}" != "n" ] && [ "${payload_uboot}" != "y" ] && \
- payload_uboot="n"
- [ "${payload_uboot}" = "y" ] && [ -z ${uboot_config} ] && \
- uboot_config="default"
- [ "${blobs_required}" != "n" ] && [ "${blobs_required}" != "y" ] && \
- blobs_required="y"
-
- # Override all payload directives with cmdline args
- [ -z ${_payload} ] && return 0
- printf "setting payload to: %s\n" "${_payload}"
- eval "$(setvars "n" payload_grub payload_memtest payload_seabios \
- payload_seabios_withgrub payload_uboot payload_grub_withseabios)"
- eval "payload_${_payload}=y"
-}
-
-prepare_target()
-{
- romdir="bin/${board}"
- cbdir="coreboot/${board}"
- [ "${board}" = "${tree}" ] || cbdir="coreboot/${tree}"
- cbfstool="cbutils/${tree}/cbfstool"
- cbrom="${cbdir}/build/coreboot.rom"
-
- x_ ./build coreboot utils ${tree}
-
- build_dependency_seabios
-
- memtest_bin="memtest86plus/build${arch#*_}/memtest.bin"
- [ "${payload_memtest}" != "y" ] || [ -f "${memtest_bin}" ] || \
- x_ ./update project build -b ${memtest_bin%/*}
-
- x_ rm -f "${romdir}/"*
-
- build_dependency_grub
- build_dependency_uboot
- build_target
-}
-
-build_dependency_seabios()
-{
- [ "${payload_seabios}" = "y" ] || return 0
-
- if [ ! -f "${seavgabiosrom}" ] \
- || [ ! -f elf/seabios/default/libgfxinit/bios.bin.elf ] \
- || [ ! -f elf/seabios/default/vgarom/bios.bin.elf ] \
- || [ ! -f elf/seabios/default/normal/bios.bin.elf ]; then
- x_ ./update project build -b seabios
- fi
-}
-
-build_dependency_grub()
-{
- [ "${payload_grub}" != "y" ] && \
- [ "${payload_seabios_withgrub}" != "y" ] && return 0
-
- rebuild_grub="n"
- [ -f "${grubelf}" ] || rebuild_grub="y"
- for keymapfile in "${kmapdir}"/*.gkb; do
- [ "${rebuild_grub}" = "y" ] || break
- [ -f "${keymapfile}" ] || continue
-
- keymap="${keymapfile##*/}"
- keymap="${keymap%.gkb}"
- [ ! -f "elf/grub/keymap_${keymap}.cfg" ] && \
- rebuild_grub="y" && break
- done
- [ "${rebuild_grub}" = "y" ] || return 0
- x_ ./build coreboot grub
-}
-
-build_dependency_uboot()
-{
- [ "${payload_uboot}" = "y" ] || return 0
-
- x_ ./update project build -b u-boot ${board}
- ubdir="elf/u-boot/${board}/${uboot_config}"
- ubootelf="${ubdir}/u-boot.elf"
- [ ! -f "${ubootelf}" ] && [ -f "${ubdir}/u-boot.bin" ] && \
- ubootelf="${ubdir}/u-boot.bin"
- [ -f "${ubootelf}" ] && return 0
- err "Could not find u-boot build for board, ${board}"
-}
-
-build_target()
-{
- for x in "normal" "vgarom" "libgfxinit"; do
- initmode="${x}"
- hmode="vesafb"
- [ "${initmode}" = "vgarom" ] || hmode="corebootfb"
- modes="${hmode} txtmode"
- [ -z ${_displaymode} ] || modes="${_displaymode}"
- for y in ${modes}; do
- displaymode="${y}"
- [ "${initmode}" = "normal" ] && \
- [ "$displaymode" != "txtmode" ] && continue
- cbcfg="${targetdir}/config/${initmode}_${displaymode}"
- [ "${initmode}" = "normal" ] && cbcfg="${cbcfg%_*}"
- build_roms "${cbcfg}"
- done
- done
-}
-
-# Main ROM building function. This calls all other functions below
-build_roms()
-{
- cbcfg="${1}"
- [ ! -f "${cbcfg}" ] && \
- printf "'%s' does not exist. Skipping build for %s %s %s\n" \
- "${cbcfg}" "${board}" "${displaymode}" "${initmode}" \
- 1>&2 && return 0
-
- x_ ./update project build -b coreboot ${board}
-
- _cbrom="elf/coreboot/${board}/${initmode}_${displaymode}"
- [ "${initmode}" = "normal" ] && \
- _cbrom="${_cbrom%_${displaymode}}"
- _cbrom="${_cbrom}/coreboot.rom"
- cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
- x_ cp "${_cbrom}" "${cbrom}"
-
- [ "${payload_memtest}" != "y" ] || \
- x_ "${cbfstool}" "${cbrom}" add-payload \
- -f "${memtest_bin}" -n img/memtest -c lzma
- [ "${payload_seabios}" = "y" ] && \
- build_seabios_roms
- [ "${payload_grub}" != "y" ] || \
- x_ build_grub_roms "${cbrom}" "grub"
- [ "${payload_uboot}" = "y" ] || return 0
- build_uboot_roms
-}
-
-build_seabios_roms()
-{
- if [ "${payload_seabios_withgrub}" = "y" ]; then
- tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
- x_ cp "${cbrom}" "${tmprom}"
- x_ build_grub_roms "${tmprom}" "seabios_withgrub"
- x_ rm -f "${tmprom}"
- else
- t=$(mkSeabiosRom "${cbrom}" "fallback/payload") || \
- err "build_seabios_roms: cannot build tmprom"
- newrom="${romdir}/seabios_${board}_${initmode}_${displaymode}"
- [ "${initmode}" = "normal" ] && newrom="${romdir}/seabios" \
- && newrom="${newrom}_${board}_${initmode}"
- x_ moverom "${t}" "${newrom}.rom"
- x_ rm -f "${t}"
- fi
-}
-
-# Make separate ROM images with GRUB payload, for each supported keymap
-build_grub_roms()
-{
- tmprom="${1}"
- payload1="${2}" # allow values: grub, seabios, seabios_withgrub
-
- grub_cbfs="fallback/payload"
- [ "${payload1}" = "grub" ] && [ "${payload_grub_withseabios}" = "y" ] \
- && x_ mv "$(mkSeabiosRom "${tmprom}" "seabios.elf")" "${tmprom}"
- [ "${payload1}" != "grub" ] && [ "${payload_seabios_withgrub}" = "y" ] \
- && grub_cbfs="img/grub2" && \
- x_ mv "$(mkSeabiosRom "${tmprom}" fallback/payload)" "${tmprom}"
-
- # we only need insert grub.elf once, for each coreboot config:
- x_ "${cbfstool}" "${tmprom}" add-payload -f "${grubelf}" \
- -n ${grub_cbfs} -c lzma
-
- # we only need insert background.png once, for each coreboot config:
- if [ "${displaymode}" = "vesafb" ] || \
- [ "${displaymode}" = "corebootfb" ]; then
- backgroundfile="config/grub/background/${grub_background}"
- x_ "${cbfstool}" "${tmprom}" add -f ${backgroundfile} \
- -n background.png -t raw
- fi
-
- tmpcfg=$(mktemp -t coreboot_rom.XXXXXXXXXX)
- x_ printf "set grub_scan_disk=\"%s\"\n" "${grub_scan_disk}" >"${tmpcfg}"
- [ "${grub_scan_disk}" = "both" ] || \
- x_ "${cbfstool}" "${tmprom}" add -f "${tmpcfg}" -n scan.cfg -t raw
- x_ printf "set timeout=%s\n" "${grub_timeout}" > "${tmpcfg}"
- [ -z "${grub_timeout}" ] || x_ "${cbfstool}" "${tmprom}" add \
- -f "${tmpcfg}" -n timeout.cfg -t raw
- x_ rm -f "${tmpcfg}"
-
- keymaps=""
- for kmapfile in "${kmapdir}"/*; do
- keymaps="${keymaps} ${kmapfile}"
- done
- [ -z ${_keyboard} ] || keymaps="${kmapdir}/${_keyboard}.gkb"
-
- for keymapfile in ${keymaps}; do
- [ -f "${keymapfile}" ] || continue
- keymap="${keymapfile##*/}"
- keymap="${keymap%.gkb}"
- tmpgrubrom="$(mkGrubRom "${keymap}" "${tmprom}")"
-
- newrom="${romdir}/${payload1}_${board}_${initmode}_"
- newrom="${newrom}${displaymode}_${keymap}.rom"
- [ "${initmode}" = "normal" ] && \
- newrom="${romdir}/${payload1}_${board}_" && \
- newrom="${newrom}${initmode}_${keymap}.rom"
- x_ moverom "${tmpgrubrom}" "${newrom}"
- x_ rm -f "${tmpgrubrom}"
- done
-}
-
-# make a rom in /tmp/ and then print the path of that ROM
-mkGrubRom() {
- _keymap="${1}"
- _cbrom="${2}"
-
- keymapcfg="elf/grub/keymap_${_keymap}.cfg"
-
- tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
- x_ cp "${_cbrom}" "${tmprom}"
- x_ "${cbfstool}" "${tmprom}" add -f "${keymapcfg}" -n keymap.cfg -t raw
-
- printf "%s\n" "${tmprom}"
-}
-
-# make a rom in /tmp/ and then print the path of that ROM
-mkSeabiosRom() {
- _cbrom="${1}" # rom to insert seabios in. will not be touched
- # (a tmpfile will be made instead)
- _seabios_cbfs_path="${2}" # e.g. fallback/payload
- _seabioself="elf/seabios/default/${initmode}/bios.bin.elf"
- tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
-
- x_ cp "${_cbrom}" "${tmprom}"
- x_ "${cbfstool}" "${tmprom}" add-payload -f "${_seabioself}" \
- -n ${_seabios_cbfs_path} -c lzma
- x_ "${cbfstool}" "${tmprom}" add-int -i 3000 -n etc/ps2-keyboard-spinup
-
- z="2"; [ "${initmode}" = "vgarom" ] && z="0"
- x_ "${cbfstool}" "${tmprom}" add-int -i $z -n etc/pci-optionrom-exec
- x_ "${cbfstool}" "${tmprom}" add-int -i 0 -n etc/optionroms-checksum
- [ "${initmode}" != "libgfxinit" ] || \
- x_ "${cbfstool}" "${tmprom}" add -f "${seavgabiosrom}" \
- -n vgaroms/seavgabios.bin -t raw
-
- printf "%s\n" "${tmprom}"
-}
-
-build_uboot_roms()
-{
- tmprom="$(mkUbootRom "${cbrom}" "fallback/payload")"
- newrom="${romdir}/uboot_payload_${board}_${initmode}_${displaymode}.rom"
- [ "${initmode}" = "normal" ] && \
- newrom="${romdir}/uboot_payload_${board}_${initmode}.rom"
- x_ moverom "${tmprom}" "${newrom}"
- x_ rm -f "${tmprom}"
-}
-
-# make a rom in /tmp/ and then print the path of that ROM
-mkUbootRom() {
- _cbrom="${1}"
- _uboot_cbfs_path="${2}"
-
- _ubdir="elf/u-boot/${board}/${uboot_config}"
- _ubootelf="${_ubdir}/u-boot.elf"
- [ -f "${_ubootelf}" ] || _ubootelf="${_ubdir}/u-boot.bin"
- [ -f "${_ubootelf}" ] || err "mkUbootRom: ${board}: cant find u-boot"
-
- tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
-
- x_ cp "${_cbrom}" "${tmprom}"
- x_ "${cbfstool}" "${tmprom}" add-payload -f "${_ubootelf}" \
- -n ${_uboot_cbfs_path} -c lzma
-
- printf "%s\n" "${tmprom}"
-}
-
-# it is assumed that no other work will be done on the ROM
-# after calling this function. therefore this function is "final"
-moverom() {
- rompath="${1}"
- newrom="${2}"
-
- printf "Creating target image: %s\n" "${newrom}"
-
- [ -d "${newrom%/*}" ] || x_ mkdir -p "${newrom%/*}/"
- [ "${blobs_required}" = "n" ] && newrom="${newrom%.rom}_noblobs.rom"
- x_ cp "${rompath}" "${newrom}"
-}
-
-usage()
-{
- cat <<- EOF
- USAGE: ./build firmware coreboot target
- To build *all* boards, do this: ./build firmware coreboot all
- To list *all* boards, do this: ./build firmware coreboot list
-
- Optional Flags:
- -d: displaymode
- -p: payload
- -k: keyboard layout
-
- Example commands:
- ./build firmware coreboot x60
- ./build firmware coreboot x200_8mb x60
- ./build firmware coreboot x60 -p grub -d corebootfb -k usqwerty
-
- possible values for 'target':
- $(listitems "config/coreboot")
-
- Refer to the ${projectname} documentation for more information.
- EOF
-}
-
-main $@
diff --git a/script/build/firmware/serprog b/script/build/firmware/serprog
deleted file mode 100755
index 0966af77..00000000
--- a/script/build/firmware/serprog
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/usr/bin/env sh
-# SPDX-License-Identifier: GPL-3.0-or-later
-# SPDX-FileCopyrightText: 2023 Riku Viitanen <riku.viitanen@protonmail.com>
-
-[ "x${DEBUG+set}" = 'xset' ] && set -v
-set -u -e
-
-. "include/err.sh"
-
-pico_src_dir=util-fw/rp2040/pico-serprog
-pico_sdk_dir=util-fw/rp2040/pico-sdk
-
-stm32_src_dir=util-fw/stm32-vserprog
-
-usage="usage: ./build firmware serprog <rp2040|stm32> [board]"
-
-main()
-{
- [ -z "${1+x}" ] && err "${usage}"
- if [ "${1}" = "rp2040" ]; then
- platform="rp2040"
- boards_dir=${pico_sdk_dir}/src/boards/include/boards
- [ -d "${pico_src_dir}/" ] || \
- x_ ./update project repo "rpi-pico-serprog"
- elif [ "${1}" = "stm32" ]; then
- platform="stm32"
- boards_dir=${stm32_src_dir}/boards
- [ -d "${stm32_src_dir}/" ] || \
- x_ ./update project repo "stm32-vserprog"
- else
- err "${usage}"
- fi
- x_ mkdir -p "bin/serprog_${platform}"
-
- if [ $# -gt 1 ] ; then
- [ "${2}" = "list" ] && print_boards ${boards_dir} && return 0
- build_${platform}_rom "${2}"
- else
- printf "Building all serprog targets\n"
- list_boards "${boards_dir}" | while read board; do
- build_${platform}_rom "${board}"
- done
- fi
-}
-
-build_rp2040_rom()
-{
- board=${1}
- printf "Building pico-serprog for ${board}\n"
- x_ cmake -DPICO_BOARD="${board}" -DPICO_SDK_PATH="${pico_sdk_dir}" \
- -B "${pico_src_dir}/build" "${pico_src_dir}"
- x_ cmake --build "${pico_src_dir}/build"
- x_ mv ${pico_src_dir}/build/pico_serprog.uf2 \
- bin/serprog_rp2040/serprog_${board}.uf2
- printf "output to bin/serprog_rp2040/serprog_${board}.uf2\n"
-}
-
-build_stm32_rom()
-{
- board=${1}
- printf "Building stm32-vserprog for ${board}\n"
- x_ make -C ${stm32_src_dir} libopencm3-just-make BOARD=${board}
- x_ make -C ${stm32_src_dir} BOARD=${board}
- x_ mv ${stm32_src_dir}/stm32-vserprog.hex \
- bin/serprog_stm32/serprog_${board}.hex
- printf "output to bin/serprog_stm32/serprog_${board}.hex\n"
-}
-
-print_boards()
-{
- printf "Available boards:\n"
- list_boards "${1}"
-}
-
-list_boards()
-{
- basename -a -s .h ${1}/*.h
-}
-
-main $@