diff options
Diffstat (limited to 'resources/coreboot/haswell/patches/0024-haswell-NRI-Add-write-leveling.patch')
| -rw-r--r-- | resources/coreboot/haswell/patches/0024-haswell-NRI-Add-write-leveling.patch | 688 |
1 files changed, 0 insertions, 688 deletions
diff --git a/resources/coreboot/haswell/patches/0024-haswell-NRI-Add-write-leveling.patch b/resources/coreboot/haswell/patches/0024-haswell-NRI-Add-write-leveling.patch deleted file mode 100644 index 59e9af9d..00000000 --- a/resources/coreboot/haswell/patches/0024-haswell-NRI-Add-write-leveling.patch +++ /dev/null @@ -1,688 +0,0 @@ -From 20fe4fa852d3e13851a01b51dc984ec5976c864e Mon Sep 17 00:00:00 2001 -From: Angel Pons <th3fanbus@gmail.com> -Date: Sun, 8 May 2022 12:56:04 +0200 -Subject: [PATCH 24/26] haswell NRI: Add write leveling - -Implement JEDEC write leveling, which is done in two steps. The first -step uses the JEDEC procedure to do "fine" write leveling, i.e. align -the DQS phase to the clock signal. The second step performs a regular -read-write test to correct "coarse" cycle errors. - -Change-Id: I27678523fe22c38173a688e2a4751c259a20f009 -Signed-off-by: Angel Pons <th3fanbus@gmail.com> ---- - .../intel/haswell/native_raminit/Makefile.inc | 1 + - .../haswell/native_raminit/raminit_main.c | 1 + - .../haswell/native_raminit/raminit_native.h | 10 + - .../train_jedec_write_leveling.c | 580 ++++++++++++++++++ - .../intel/haswell/registers/mchbar.h | 2 + - 5 files changed, 594 insertions(+) - create mode 100644 src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c - -diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.inc b/src/northbridge/intel/haswell/native_raminit/Makefile.inc -index c442be0728..40c2f5e014 100644 ---- a/src/northbridge/intel/haswell/native_raminit/Makefile.inc -+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.inc -@@ -16,5 +16,6 @@ romstage-y += setup_wdb.c - romstage-y += spd_bitmunching.c - romstage-y += testing_io.c - romstage-y += timings_refresh.c -+romstage-y += train_jedec_write_leveling.c - romstage-y += train_read_mpr.c - romstage-y += train_receive_enable.c -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -index 264d1468f5..1ff23be615 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c -@@ -62,6 +62,7 @@ static const struct task_entry cold_boot[] = { - { pre_training, true, "PRETRAIN", }, - { train_receive_enable, true, "RCVET", }, - { train_read_mpr, true, "RDMPRT", }, -+ { train_jedec_write_leveling, true, "JWRL", }, - }; - - /* Return a generic stepping value to make stepping checks simpler */ -diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -index a7551ad63c..666b233c45 100644 ---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h -+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h -@@ -59,6 +59,9 @@ - /* Specified in PI ticks. 64 PI ticks == 1 qclk */ - #define tDQSCK_DRIFT 64 - -+/* Maximum additional latency */ -+#define MAX_ADD_DELAY 2 -+ - enum margin_parameter { - RcvEna, - RdT, -@@ -215,6 +218,7 @@ enum raminit_status { - RAMINIT_STATUS_REUT_ERROR, - RAMINIT_STATUS_RCVEN_FAILURE, - RAMINIT_STATUS_RMPR_FAILURE, -+ RAMINIT_STATUS_JWRL_FAILURE, - RAMINIT_STATUS_UNSPECIFIED_ERROR, /** TODO: Deprecated in favor of specific values **/ - }; - -@@ -380,6 +384,11 @@ static inline uint32_t get_data_train_feedback(const uint8_t channel, const uint - return mchbar_read32(DDR_DATA_TRAIN_FEEDBACK(channel, byte)); - } - -+static inline uint16_t get_byte_group_errors(const uint8_t channel) -+{ -+ return mchbar_read32(4 + REUT_ch_ERR_MISC_STATUS(channel)) & 0x1ff; -+} -+ - /* Number of ticks to wait in units of 69.841279 ns (citation needed) */ - static inline void tick_delay(const uint32_t delay) - { -@@ -439,6 +448,7 @@ enum raminit_status configure_memory_map(struct sysinfo *ctrl); - enum raminit_status do_jedec_init(struct sysinfo *ctrl); - enum raminit_status train_receive_enable(struct sysinfo *ctrl); - enum raminit_status train_read_mpr(struct sysinfo *ctrl); -+enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl); - - void configure_timings(struct sysinfo *ctrl); - void configure_refresh(struct sysinfo *ctrl); -diff --git a/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c -new file mode 100644 -index 0000000000..1ba28a3bd4 ---- /dev/null -+++ b/src/northbridge/intel/haswell/native_raminit/train_jedec_write_leveling.c -@@ -0,0 +1,580 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+ -+#include <assert.h> -+#include <console/console.h> -+#include <delay.h> -+#include <northbridge/intel/haswell/haswell.h> -+#include <types.h> -+ -+#include "raminit_native.h" -+#include "ranges.h" -+ -+#define JWLC_PLOT RAM_DEBUG -+#define JWRL_PLOT RAM_DEBUG -+ -+static void reset_dram_dll(struct sysinfo *ctrl, const uint8_t channel, const uint8_t rank) -+{ -+ reut_issue_mrs(ctrl, channel, BIT(rank), 0, ctrl->mr0[channel][rank] | MR0_DLL_RESET); -+} -+ -+static void program_wdb_pattern(struct sysinfo *ctrl, const bool invert) -+{ -+ /* Pattern to keep DQ-DQS simple but detect any failures. Same as NHM/WSM. */ -+ const uint8_t pat[4][2] = { -+ { 0x00, 0xff }, -+ { 0xff, 0x00 }, -+ { 0xc3, 0x3c }, -+ { 0x3c, 0xc3 }, -+ }; -+ const uint8_t pmask[2][8] = { -+ { 0, 0, 1, 1, 1, 1, 0, 0 }, -+ { 1, 1, 0, 0, 0, 0, 1, 1 }, -+ }; -+ for (uint8_t s = 0; s < ARRAY_SIZE(pat); s++) -+ write_wdb_fixed_pat(ctrl, pat[s], pmask[invert], ARRAY_SIZE(pmask[invert]), s); -+} -+ -+static int16_t set_add_delay(uint32_t *add_delay, uint8_t rank, int8_t target_off) -+{ -+ const uint8_t shift = rank * 2; -+ if (target_off > MAX_ADD_DELAY) { -+ *add_delay &= ~(3 << shift); -+ *add_delay |= MAX_ADD_DELAY << shift; -+ return 128 * (target_off - MAX_ADD_DELAY); -+ } else if (target_off < 0) { -+ *add_delay &= ~(3 << shift); -+ *add_delay |= 0 << shift; -+ return 128 * target_off; -+ } else { -+ *add_delay &= ~(3 << shift); -+ *add_delay |= target_off << shift; -+ return 0; -+ } -+} -+ -+static enum raminit_status train_jedec_write_leveling_cleanup(struct sysinfo *ctrl) -+{ -+ const struct reut_box reut_addr = { -+ .col = { -+ .start = 0, -+ .stop = 1023, -+ .inc_val = 1, -+ }, -+ }; -+ const struct wdb_pat wdb_pattern = { -+ .start_ptr = 0, -+ .stop_ptr = 3, -+ .inc_rate = 1, -+ .dq_pattern = BASIC_VA, -+ }; -+ const int8_t offsets[] = { 0, 1, -1, 2, 3 }; -+ const int8_t dq_offsets[] = { 0, -10, 10, -5, 5, -15, 15 }; -+ const uint8_t dq_offset_max = ARRAY_SIZE(dq_offsets); -+ -+ /* Set LFSR seeds to be sequential */ -+ program_wdb_lfsr(ctrl, true); -+ setup_io_test( -+ ctrl, -+ ctrl->chanmap, -+ PAT_WR_RD, -+ 2, -+ 4, -+ &reut_addr, -+ NSOE, -+ &wdb_pattern, -+ 0, -+ 0); -+ -+ const union reut_pat_wdb_cl_mux_cfg_reg reut_wdb_cl_mux_cfg = { -+ .mux_0_control = REUT_MUX_BTBUFFER, -+ .mux_1_control = REUT_MUX_BTBUFFER, -+ .mux_2_control = REUT_MUX_BTBUFFER, -+ .ecc_data_source_sel = 1, -+ }; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ mchbar_write32(REUT_ch_PAT_WDB_CL_MUX_CFG(channel), reut_wdb_cl_mux_cfg.raw); -+ } -+ -+ int8_t byte_off[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ uint32_t add_delay[NUM_CHANNELS] = { 0 }; -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ bool invert = false; -+ const uint16_t valid_byte_mask = BIT(ctrl->lanes) - 1; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ uint8_t chanmask = 0; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) -+ chanmask |= select_reut_ranks(ctrl, channel, BIT(rank)); -+ -+ if (!chanmask) -+ continue; -+ -+ printk(BIOS_DEBUG, "Rank %u\n", rank); -+ printk(JWLC_PLOT, "Channel"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWLC_PLOT, "\t\t%u\t", channel); -+ } -+ printk(JWLC_PLOT, "\nByte\t"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWLC_PLOT, "\t"); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(JWLC_PLOT, "%u ", byte); -+ } -+ printk(JWLC_PLOT, "\nDelay DqOffset"); -+ bool done = false; -+ int8_t byte_sum[NUM_CHANNELS] = { 0 }; -+ uint16_t byte_pass[NUM_CHANNELS] = { 0 }; -+ for (uint8_t off = 0; off < ARRAY_SIZE(offsets); off++) { -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ const int16_t global_byte_off = -+ set_add_delay(&add_delay[channel], rank, offsets[off]); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ update_txt(ctrl, channel, rank, byte, TXT_DQDQS_OFF, -+ global_byte_off); -+ } -+ mchbar_write32(SC_WR_ADD_DELAY_ch(channel), -+ add_delay[channel]); -+ } -+ /* Reset FIFOs and DRAM DLL (Micron workaround) */ -+ if (!ctrl->lpddr) { -+ io_reset(); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ reset_dram_dll(ctrl, channel, rank); -+ } -+ udelay(1); -+ } -+ for (uint8_t dq_offset = 0; dq_offset < dq_offset_max; dq_offset++) { -+ printk(JWLC_PLOT, "\n% 3d\t% 3d", -+ offsets[off], dq_offsets[dq_offset]); -+ change_1d_margin_multicast( -+ ctrl, -+ WrT, -+ dq_offsets[dq_offset], -+ rank, -+ false, -+ REG_FILE_USE_RANK); -+ -+ /* -+ * Re-program the WDB pattern. Change the pattern -+ * for the next test to avoid false pass issues. -+ */ -+ program_wdb_pattern(ctrl, invert); -+ invert = !invert; -+ run_io_test(ctrl, chanmask, BASIC_VA, true); -+ done = true; -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWLC_PLOT, "\t"); -+ uint16_t result = get_byte_group_errors(channel); -+ result &= valid_byte_mask; -+ -+ /* Skip bytes that have failed or already passed */ -+ const uint16_t skip_me = result | byte_pass[channel]; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const bool pass = result & BIT(byte); -+ printk(JWLC_PLOT, pass ? "# " : ". "); -+ if (skip_me & BIT(byte)) -+ continue; -+ -+ byte_pass[channel] |= BIT(byte); -+ byte_off[channel][byte] = offsets[off]; -+ byte_sum[channel] += offsets[off]; -+ } -+ if (byte_pass[channel] != valid_byte_mask) -+ done = false; -+ } -+ if (done) -+ break; -+ } -+ if (done) -+ break; -+ } -+ printk(BIOS_DEBUG, "\n\n"); -+ if (!done) { -+ printk(BIOS_ERR, "JWLC: Could not find a pass for all bytes\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_ERR, "Channel %u, rank %u fail:", channel, rank); -+ const uint16_t passing_mask = byte_pass[channel]; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ if (BIT(byte) & passing_mask) -+ continue; -+ -+ printk(BIOS_ERR, " %u", byte); -+ } -+ printk(BIOS_ERR, "\n"); -+ } -+ status = RAMINIT_STATUS_JWRL_FAILURE; -+ break; -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /* Refine target offset to make sure it works for all bytes */ -+ int8_t target_off = DIV_ROUND_CLOSEST(byte_sum[channel], ctrl->lanes); -+ int16_t global_byte_off = 0; -+ uint8_t all_good_loops = 0; -+ bool all_good = 0; -+ while (!all_good) { -+ global_byte_off = -+ set_add_delay(&add_delay[channel], rank, target_off); -+ all_good = true; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ int16_t local_offset; -+ local_offset = byte_off[channel][byte] - target_off; -+ local_offset = local_offset * 128 + global_byte_off; -+ const uint16_t tx_dq = ctrl->tx_dq[channel][rank][byte]; -+ if (tx_dq + local_offset >= (512 - 64)) { -+ all_good = false; -+ all_good_loops++; -+ target_off++; -+ break; -+ } -+ const uint16_t txdqs = ctrl->tx_dq[channel][rank][byte]; -+ if (txdqs + local_offset < 96) { -+ all_good = false; -+ all_good_loops++; -+ target_off--; -+ break; -+ } -+ } -+ /* Avoid an infinite loop */ -+ if (all_good_loops > 3) -+ break; -+ } -+ if (!all_good) { -+ printk(BIOS_ERR, "JWLC: Target offset refining failed\n"); -+ status = RAMINIT_STATUS_JWRL_FAILURE; -+ break; -+ } -+ printk(BIOS_DEBUG, "C%u.R%u: Offset\tFinalEdge\n", channel, rank); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ int16_t local_offset; -+ local_offset = byte_off[channel][byte] - target_off; -+ local_offset = local_offset * 128 + global_byte_off; -+ ctrl->tx_dq[channel][rank][byte] += local_offset; -+ ctrl->txdqs[channel][rank][byte] += local_offset; -+ update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0); -+ printk(BIOS_DEBUG, " B%u: %d\t%d\n", byte, local_offset, -+ ctrl->txdqs[channel][rank][byte]); -+ } -+ mchbar_write32(SC_WR_ADD_DELAY_ch(channel), add_delay[channel]); -+ if (!ctrl->lpddr) { -+ reset_dram_dll(ctrl, channel, rank); -+ udelay(1); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+ /* Restore WDB after test */ -+ write_wdb_va_pat(ctrl, 0, BASIC_VA_PAT_SPREAD_8, 8, 0); -+ program_wdb_lfsr(ctrl, false); -+ mchbar_write32(DDR_DATA_OFFSET_TRAIN, 0); -+ -+ /** TODO: Do full JEDEC init instead? **/ -+ io_reset(); -+ return status; -+} -+ -+static enum raminit_status verify_wl_width(const int32_t lwidth) -+{ -+ if (lwidth <= 32) { -+ /* Check if width is valid */ -+ printk(BIOS_ERR, "WrLevel: Width region (%d) too small\n", lwidth); -+ return RAMINIT_STATUS_JWRL_FAILURE; -+ } -+ if (lwidth >= 96) { -+ /* Since we're calibrating a phase, a too large region is a problem */ -+ printk(BIOS_ERR, "WrLevel: Width region (%d) too large\n", lwidth); -+ return RAMINIT_STATUS_JWRL_FAILURE; -+ } -+ return 0; -+} -+ -+enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl) -+{ -+ /* -+ * Enabling WL mode causes DQS to toggle for 1024 QCLK. -+ * Wait for this to stop. Round up to nearest microsecond. -+ */ -+ const bool wl_long_delay = ctrl->lpddr; -+ const uint32_t dqs_toggle_time = wl_long_delay ? 2048 : 1024; -+ const uint32_t wait_time_us = DIV_ROUND_UP(ctrl->qclkps * dqs_toggle_time, 1000 * 1000); -+ -+ const uint16_t wl_start = 192; -+ const uint16_t wl_stop = 192 + 128; -+ const uint16_t wl_step = 2; -+ -+ /* Do not use cached MR values */ -+ const bool save_restore_mrs = ctrl->restore_mrs; -+ ctrl->restore_mrs = 0; -+ -+ /* Propagate delay values (without a write command) */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ /* Propagate delay values from rank 0 to prevent assertion failures in RTL */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.read_rf_rd = 0; -+ data_control_0.read_rf_wr = 1; -+ data_control_0.read_rf_rank = 0; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ union ddr_data_control_2_reg data_control_2 = { -+ .raw = ctrl->dq_control_2[channel][byte], -+ }; -+ data_control_2.force_bias_on = 1; -+ data_control_2.force_rx_on = 0; -+ data_control_2.wl_long_delay = wl_long_delay; -+ mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw); -+ } -+ } -+ -+ if (ctrl->lpddr) -+ die("%s: Missing LPDDR support\n", __func__); -+ -+ if (!ctrl->lpddr) -+ ddr3_program_mr1(ctrl, 0, 1); -+ -+ enum raminit_status status = RAMINIT_STATUS_SUCCESS; -+ struct phase_train_data region_data[NUM_CHANNELS][NUM_LANES] = { 0 }; -+ for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) { -+ if (!does_rank_exist(ctrl, rank)) -+ continue; -+ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /** TODO: Differs for LPDDR **/ -+ uint16_t mr1reg = ctrl->mr1[channel][rank]; -+ mr1reg &= ~MR1_QOFF_ENABLE; -+ mr1reg |= MR1_WL_ENABLE; -+ if (is_hsw_ult()) { -+ mr1reg &= ~RTTNOM_MASK; -+ mr1reg |= encode_ddr3_rttnom(120); -+ } else if (ctrl->dpc[channel] == 2) { -+ mr1reg &= ~RTTNOM_MASK; -+ mr1reg |= encode_ddr3_rttnom(60); -+ } -+ reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg); -+ -+ /* Assert ODT for myself */ -+ uint8_t odt_matrix = BIT(rank); -+ if (ctrl->dpc[channel] == 2) { -+ /* Assert ODT for non-target DIMM */ -+ const uint8_t other_dimm = ((rank + 2) / 2) & 1; -+ odt_matrix |= BIT(2 * other_dimm); -+ } -+ -+ union reut_misc_odt_ctrl_reg reut_misc_odt_ctrl = { -+ .raw = 0, -+ }; -+ if (ctrl->lpddr) { -+ /* Only one ODT pin for ULT */ -+ reut_misc_odt_ctrl.odt_on = 1; -+ reut_misc_odt_ctrl.odt_override = 1; -+ } else if (!is_hsw_ult()) { -+ reut_misc_odt_ctrl.odt_on = odt_matrix; -+ reut_misc_odt_ctrl.odt_override = 0xf; -+ } -+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), reut_misc_odt_ctrl.raw); -+ } -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /* -+ * Enable write leveling mode in DDR and propagate delay -+ * values (without a write command). Stay in WL mode. -+ */ -+ union ddr_data_control_0_reg data_control_0 = { -+ .raw = ctrl->dq_control_0[channel], -+ }; -+ data_control_0.wl_training_mode = 1; -+ data_control_0.tx_pi_on = 1; -+ data_control_0.read_rf_rd = 0; -+ data_control_0.read_rf_wr = 1; -+ data_control_0.read_rf_rank = rank; -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw); -+ } -+ printk(BIOS_DEBUG, "\nRank %u\n", rank); -+ printk(JWRL_PLOT, "Channel\t"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(JWRL_PLOT, "%u", channel); -+ if (channel > 0) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(JWRL_PLOT, "\t"); -+ } -+ printk(JWRL_PLOT, "\nByte"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) -+ printk(JWRL_PLOT, "\t%u", byte); -+ } -+ printk(JWRL_PLOT, "\nWlDelay"); -+ for (uint16_t wl_delay = wl_start; wl_delay < wl_stop; wl_delay += wl_step) { -+ printk(JWRL_PLOT, "\n %3u:", wl_delay); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ update_txt(ctrl, channel, rank, byte, TXT_TXDQS, -+ wl_delay); -+ } -+ } -+ /* Wait for the first burst to finish */ -+ if (wl_delay == wl_start) -+ udelay(wait_time_us); -+ -+ io_reset(); -+ udelay(wait_time_us); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ const uint32_t feedback = -+ get_data_train_feedback(channel, byte); -+ const bool pass = (feedback & 0x1ff) >= 16; -+ printk(JWRL_PLOT, "\t%c%u", pass ? '.' : '#', feedback); -+ phase_record_pass( -+ ®ion_data[channel][byte], -+ pass, -+ wl_delay, -+ wl_start, -+ wl_step); -+ } -+ } -+ } -+ printk(JWRL_PLOT, "\n"); -+ printk(BIOS_DEBUG, "\n\tInitSt\tInitEn\tCurrSt\tCurrEn\tLargSt\tLargEn\n"); -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ printk(BIOS_DEBUG, "C%u\n", channel); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct phase_train_data *data = ®ion_data[channel][byte]; -+ -+ phase_append_initial_to_current(data, wl_start, wl_step); -+ printk(BIOS_DEBUG, " B%u:\t%d\t%d\t%d\t%d\t%d\t%d\n", -+ byte, -+ data->initial.start, -+ data->initial.end, -+ data->current.start, -+ data->current.end, -+ data->largest.start, -+ data->largest.end); -+ } -+ } -+ -+ /* -+ * Clean up after test. Very coarsely adjust for -+ * any cycle errors. Program values for TxDQS. -+ */ -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!rank_in_ch(ctrl, rank, channel)) -+ continue; -+ -+ /* Clear ODT before MRS (JEDEC spec) */ -+ mchbar_write32(REUT_ch_MISC_ODT_CTRL(channel), 0); -+ -+ /** TODO: Differs for LPDDR **/ -+ const uint16_t mr1reg = ctrl->mr1[channel][rank] | MR1_QOFF_ENABLE; -+ reut_issue_mrs(ctrl, channel, BIT(rank), 1, mr1reg); -+ -+ printk(BIOS_DEBUG, "\nC%u.R%u: LftEdge Width\n", channel, rank); -+ const bool rank_x16 = ctrl->dimms[channel][rank / 2].data.width == 16; -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ struct phase_train_data *data = ®ion_data[channel][byte]; -+ const int32_t lwidth = range_width(data->largest); -+ int32_t tx_start = data->largest.start; -+ printk(BIOS_DEBUG, " B%u: %d\t%d\n", byte, tx_start, lwidth); -+ status = verify_wl_width(lwidth); -+ if (status) { -+ printk(BIOS_ERR, -+ "WrLevel problems on channel %u, byte %u\n", -+ channel, byte); -+ goto clean_up; -+ } -+ -+ /* Align byte pairs if DIMM is x16 */ -+ if (rank_x16 && (byte & 1)) { -+ const struct phase_train_data *const ref_data = -+ ®ion_data[channel][byte - 1]; -+ -+ if (tx_start > ref_data->largest.start + 64) -+ tx_start -= 128; -+ -+ if (tx_start < ref_data->largest.start - 64) -+ tx_start += 128; -+ } -+ -+ /* Fix for b4618067 - need to add 1 QCLK to DQS PI */ -+ if (is_hsw_ult()) -+ tx_start += 64; -+ -+ assert(tx_start >= 0); -+ ctrl->txdqs[channel][rank][byte] = tx_start; -+ ctrl->tx_dq[channel][rank][byte] = tx_start + 32; -+ update_txt(ctrl, channel, rank, byte, TXT_RESTORE, 0); -+ } -+ } -+ printk(BIOS_DEBUG, "\n"); -+ } -+ -+clean_up: -+ for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) { -+ if (!does_ch_exist(ctrl, channel)) -+ continue; -+ -+ mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]); -+ for (uint8_t byte = 0; byte < ctrl->lanes; byte++) { -+ mchbar_write32(DQ_CONTROL_2(channel, byte), -+ ctrl->dq_control_2[channel][byte]); -+ } -+ } -+ if (!ctrl->lpddr) -+ ddr3_program_mr1(ctrl, 0, 0); -+ -+ ctrl->restore_mrs = save_restore_mrs; -+ -+ if (status) -+ return status; -+ -+ /** TODO: If this step fails and dec_wrd is set, clear it and try again **/ -+ return train_jedec_write_leveling_cleanup(ctrl); -+} -diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h -index 6a31d3a32c..7c0b5a49de 100644 ---- a/src/northbridge/intel/haswell/registers/mchbar.h -+++ b/src/northbridge/intel/haswell/registers/mchbar.h -@@ -121,6 +121,8 @@ - - #define REUT_ch_ERR_DATA_MASK(ch) _MCMAIN_C(0x40d8, ch) - -+#define REUT_ch_ERR_MISC_STATUS(ch) _MCMAIN_C(0x40e8, ch) -+ - #define REUT_ch_MISC_CKE_CTRL(ch) _MCMAIN_C(0x4190, ch) - #define REUT_ch_MISC_ODT_CTRL(ch) _MCMAIN_C(0x4194, ch) - #define REUT_ch_MISC_PAT_CADB_CTRL(ch) _MCMAIN_C(0x4198, ch) --- -2.39.2 - |