diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/get.sh | 162 | ||||
| -rw-r--r-- | include/git.sh | 145 | ||||
| -rw-r--r-- | include/init.sh | 245 | ||||
| -rw-r--r-- | include/inject.sh | 541 | ||||
| -rw-r--r-- | include/lib.sh | 155 | ||||
| -rw-r--r-- | include/mrc.sh | 44 | ||||
| -rw-r--r-- | include/release.sh | 88 | ||||
| -rw-r--r-- | include/rom.sh | 170 | ||||
| -rw-r--r-- | include/tree.sh | 343 | ||||
| -rw-r--r-- | include/vendor.sh | 402 |
10 files changed, 1327 insertions, 968 deletions
diff --git a/include/get.sh b/include/get.sh new file mode 100644 index 00000000..a3328454 --- /dev/null +++ b/include/get.sh @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: GPL-3.0-or-later +# Copyright (c) 2020-2021,2023-2025 Leah Rowe <leah@libreboot.org> +# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com> + +eval "`setvars "" loc url bkup_url subcurl subhash subgit subgit_bkup \ + depend subcurl_bkup repofail`" + +tmpgit="$xbloc/gitclone" +tmpgitcache="$XBMK_CACHE/tmpgit" + +fetch_targets() +{ + [ -d "src/$project/$tree" ] || git_prep "$url" "$bkup_url" \ + "$xbmkpwd/$configdir/$tree/patches" "src/$project/$tree" submod; : +} + +fetch_project() +{ + eval "`setvars "" xtree`" + eval "`setcfg "config/git/$project/pkg.cfg"`" + + chkvars url bkup_url && [ -n "$xtree" ] && x_ ./mk -f coreboot "$xtree" + [ -z "$depend" ] || for d in $depend ; do + x_ ./mk -f $d + done + clone_project +} + +clone_project() +{ + loc="$XBMK_CACHE/clone/$project" && singletree "$project" && \ + loc="src/$project" + + e "$loc" d missing && remkdir "${tmpgit%/*}" && git_prep \ + "$url" "$bkup_url" "$xbmkpwd/config/$project/patches" "$loc"; : +} + +git_prep() +{ + printf "Creating code directory, src/%s/%s\n" "$project" "$tree" + + _patchdir="$3" + _loc="$4" # $1 and $2 are gitrepo and gitrepo_backup + + chkvars rev + xbget git "$1" "$2" "$tmpgit" "$rev" "$_patchdir" + if singletree "$project" || [ $# -gt 4 ]; then + dx_ fetch_submodule "$mdir/module.list" + fi + + [ "$_loc" = "${_loc%/*}" ] || x_ mkdir -p "${_loc%/*}" + x_ mv "$tmpgit" "$_loc" +} + +fetch_submodule() +{ + mcfgdir="$mdir/${1##*/}"; eval \ + "`setvars "" subhash subgit subgit_bkup subcurl subcurl_bkup st`" + eval "`setcfg "$mcfgdir/module.cfg" 0`" + + for xt in git curl; do + _seval="if [ -n \"\$sub$xt\" ] || [ -n \"\$sub${xt}_bkup\" ]" + eval "$_seval; then st=\"\$st \$xt\"; fi" + done + + st="${st# }" && [ "$st" = "git curl" ] && err "$mdir: git+curl defined" + [ -z "$st" ] && return 0 # subgit/subcurl not defined + chkvars "sub${st}" "sub${st}_bkup" "subhash" + + [ "$st" = "git" ] && x_ rm -Rf "$tmpgit/$1" + eval xbget "$st" "\$sub$st" "\$sub${st}_bkup" "$tmpgit/$1" \ + "$subhash" "$mdir/${1##*/}/patches" +} + +xbget() +{ + [ "$1" = "curl" ] || [ "$1" = "copy" ] || [ "$1" = "git" ] || \ + err "Bad dlop (arg 1): xbget $*" + + echk="f" && [ "$1" = "git" ] && echk="d" + + for url in "$2" "$3"; do + [ -n "$url" ] || err "empty URL given in: xbget $*" + try_file "$url" "$@" || continue + eval "[ -$echk \"$4\" ] || continue" + return 0 # successful download/copy + done + err "$1 $2 $3 $4: not downloaded"; : +} + +try_file() +{ + cached="file/$6" && [ "$2" = "git" ] && cached="clone/${3##*/}" && \ + cached="${cached%.git}" # always the main repo as basis for naming, + # in case the backup has another name + cached="$XBMK_CACHE/$cached" + x_ mkdir -p "${5%/*}" "${cached%/*}" + + echk="d" && [ "$2" != "git" ] && echk="f" && \ + bad_checksum "$6" "$cached" 2>/dev/null && x_ rm -f "$cached" + + evalchk="[ -$echk \"$cached\" ] || " && [ "$2" = "git" ] && evalchk="" + eval "${evalchk}try_$2 \"\$cached\" \"\$@\" || return 1" + [ "$2" != "git" ] && [ -f "$5" ] && \ + bad_checksum "$6" "$5" 2>/dev/null && x_ cp "$cached" "$5" + eval "[ -$echk \"$cached\" ] || return 1" + + if [ "$2" = "git" ]; then + [ -d "$5" ] || tmpclone "$cached" "$5" "$6" "$7" || \ + err "Can't clone final repo in command: try_file $*"; : + else + bad_checksum "$6" "$cached" && x_ rm -f "$cached" && return 1 + [ "$cached" != "$5" ] && x_ cp "$cached" "$5" + bad_checksum "$6" "$5" && x_ rm -f "$5" && return 1; : + fi + + eval "[ -$echk \"$5\" ] || return 1" +} + +try_curl() +{ + _ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0" + ( x_ curl --location --retry 3 -A "$_ua" "$2" -o "$1" ) || \ + ( x_ wget --tries 3 -U "$_ua" "$2" -O "$1" ) || return 1; : +} + +try_copy() +{ + e "$2" f missing && return 1; : + ( x_ cp "$2" "$1" ) || return 1; : +} + +try_git() +{ + gitdest="`findpath "$1"`" || err "Can't get readpath for '$1'" + x_ rm -Rf "$tmpgitcache" + + [ -d "$gitdest" ] || ( x_ git clone "$2" "$tmpgitcache" ) || return 1 + [ -d "$gitdest" ] || x_ mkdir -p "${gitdest%/*}" + [ -d "$gitdest" ] || x_ mv "$tmpgitcache" "$gitdest" + + ( x_ git -C "$gitdest" remote remove main ) || : + ( x_ git -C "$gitdest" remote remove backup ) || : + x_ git -C "$gitdest" remote add main "$4" + x_ git -C "$gitdest" remote add backup "$5" + ( x_ git -C "$gitdest" pull --all ) || :; : +} + +bad_checksum() +{ + e "$2" f missing && return 0 + csum="$(x_ sha512sum "$2" | awk '{print $1}')" || err "!sha512 '$2' $1" + [ "$csum" = "$1" ] && return 1; x_ rm -f "$2" + printf "BAD SHA512 %s, '%s'; need '%s'\n" "$csum" "$2" "$1" 1>&2 +} + +tmpclone() +{ + ( x_ git clone "$1" "$2" ) || return 1 + ( x_ git -C "$2" reset --hard "$3" ) || return 1 + ( fx_ "eval x_ git -C \"$2\" am" find "$4" -type f ) || return 1; : +} diff --git a/include/git.sh b/include/git.sh deleted file mode 100644 index 37f5bbae..00000000 --- a/include/git.sh +++ /dev/null @@ -1,145 +0,0 @@ -# SPDX-License-Identifier: GPL-3.0-or-later -# Copyright (c) 2020-2021,2023-2025 Leah Rowe <leah@libreboot.org> -# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com> - -eval "`setvars "" loc url bkup_url subfile subhash subrepo subrepo_bkup \ - depend subfile_bkup repofail`" - -tmpgit="$xbmklocal/gitclone" - -fetch_targets() -{ - e "src/$project/$tree" d && return 0 - - printf "Creating %s tree %s\n" "$project" "$tree" - git_prep "$loc" "$loc" "$xbmkpwd/$configdir/$tree/patches" \ - "src/$project/$tree" with_submodules - nuke "$project/$tree" "$project/$tree" -} - -fetch_project() -{ - eval "`setvars "" xtree`" - eval "`setcfg "config/git/$project/pkg.cfg"`" - - chkvars url - - [ -n "$xtree" ] && x_ ./mk -f coreboot "$xtree" - [ -z "$depend" ] || for d in $depend ; do - printf "'%s' needs '%s'; grabbing '%s'\n" "$project" "$d" "$d" - x_ ./mk -f $d - done - clone_project - - for x in config/git/*; do - [ -d "$x" ] && nuke "${x##*/}" "src/${x##*/}" 2>/dev/null; : - done; : -} - -clone_project() -{ - loc="$XBMK_CACHE/repo/$project" && singletree "$project" && \ - loc="src/$project" - printf "Downloading project '%s' to '%s'\n" "$project" "$loc" - - e "$loc" d missing && remkdir "${tmpgit%/*}" && git_prep \ - "$url" "$bkup_url" "$xbmkpwd/config/$project/patches" "$loc"; : -} - -git_prep() -{ - _patchdir="$3" - _loc="$4" # $1 and $2 are gitrepo and gitrepo_backup - - chkvars rev - tmpclone "$1" "$2" "$tmpgit" "$rev" "$_patchdir" - if singletree "$project" || [ $# -gt 4 ]; then - [ -f "$mdir/module.list" ] && while read -r msrcdir; do - fetch_submodule "$msrcdir" - done < "$mdir/module.list"; : - fi - - [ "$_loc" != "$XBMK_CACHE/repo/$project" ] && \ - [ "$XBMK_RELEASE" = "y" ] && rmgit "$tmpgit" - - [ "$_loc" = "${_loc%/*}" ] || x_ mkdir -p "${_loc%/*}" - mv "$tmpgit" "$_loc" || $err "git_prep: !mv $tmpgit $_loc" -} - -# return 0 if project is single-tree, otherwise 1 -# e.g. coreboot is multi-tree, so 1 -singletree() -{ - for targetfile in "config/${1}/"*/target.cfg; do - [ -e "$targetfile" ] && [ -f "$targetfile" ] && return 1; : - done; : -} - -fetch_submodule() -{ - mcfgdir="$mdir/${1##*/}"; eval \ - "`setvars "" subhash subrepo subrepo_bkup subfile subfile_bkup st`" - [ ! -f "$mcfgdir/module.cfg" ] || . "$mcfgdir/module.cfg" || \ - $err "! . $mcfgdir/module.cfg" - - for xt in repo file; do - _seval="if [ -n \"\$sub$xt\" ] || [ -n \"\$sub${xt}_bkup\" ]" - eval "$_seval; then st=\"\$st \$xt\"; fi" - done - st="${st# }" && [ "$st" = "repo file" ] && $err "$mdir: repo+file" - - [ -z "$st" ] && return 0 # subrepo/subfile not defined - chkvars "sub${st}" "sub${st}_bkup" "subhash" - - [ "$st" = "file" ] && xbmkget "$subfile" "$subfile_bkup" \ - "$tmpgit/$1" "$subhash" && return 0 - rm -Rf "$tmpgit/$1" || $err "!rm '$mdir' '$1'" - tmpclone "$subrepo" "$subrepo_bkup" "$tmpgit/$1" "$subhash" \ - "$mdir/${1##*/}/patches" -} - -tmpclone() -{ - livepull="n" && [ "$repofail" = "y" ] && \ - printf "Cached clone failed; trying online.\n" 1>&2 && livepull="y" - - repofail="n" - - [ $# -lt 6 ] || rm -Rf "$3" || $err "git retry: !rm $3 ($1)" - repodir="$XBMK_CACHE/repo/${1##*/}" && [ $# -gt 5 ] && repodir="$3" - mkdir -p "$XBMK_CACHE/repo" || $err "!rmdir $XBMK_CACHE/repo" - - if [ "$livepull" = "y" ] && [ ! -d "$repodir" ]; then - git clone "$1" "$repodir" || git clone $2 "$repodir" || \ - $err "!clone $1 $2 $repodir $4 $5" # - elif [ -d "$repodir" ] && [ $# -lt 6 ]; then - git -C "$repodir" pull || sleep 3 || git -C "$repodir" pull \ - || sleep 3 || git -C "$repodir" pull || : - fi - ( - [ $# -gt 5 ] || git clone "$repodir" "$3" || $err "!clone $repodir $3" - git -C "$3" reset --hard "$4" || $err "!reset $1 $2 $3 $4 $5" - git_am_patches "$3" "$5" - ) || repofail="y" - - [ "$repofail" = "y" ] && [ $# -lt 6 ] && tmpclone "$@" retry - [ "$repofail" = "y" ] && $err "!clone $1 $2 $3 $4 $5"; : -} - -git_am_patches() -{ - for p in "$2/"*; do - [ -L "$p" ] && continue - [ -e "$p" ] || continue - [ -d "$p" ] && git_am_patches "$1" "$p" && continue - [ ! -f "$p" ] || git -C "$1" am "$p" || $err "$1 $2: !am $p" - done; : -} - -nuke() -{ - e "config/${1%/}/nuke.list" f missing || while read -r nukefile; do - rmf="src/${2%/}/$nukefile" && [ -L "$rmf" ] && continue - e "$rmf" e missing || rm -Rf "$rmf" || $err "!rm $rmf, ${2%/}" - done < "config/${1%/}/nuke.list"; : -} diff --git a/include/init.sh b/include/init.sh index 3f813ea7..bc5a62b6 100644 --- a/include/init.sh +++ b/include/init.sh @@ -12,62 +12,126 @@ projectsite="https://libreboot.org/" [ -z "${PATH+x}" ] && \ export PATH="/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games" -xbmkpath="$PATH" - -err="err_" eval "`setvars "" _nogit board reinstall versiondate aur_notice configdir \ - datadir version xbmkpwd relname xbmkpwd xbmktmp python pyver xbmklocal`" + datadir version xbmkpwd relname xbmkpwd xbtmp python pyver xbloc \ + xbmklock cvxbmk cvchk xbmkpath`" xbmk_init() { - xbmkpwd="`pwd`" || $err "Cannot generate PWD" - xbmklocal="$xbmkpwd/tmp" + xbmkpwd="`pwd`" || err "Cannot generate PWD" + xbloc="$xbmkpwd/tmp" + xbmklock="$xbmkpwd/lock" export PWD="$xbmkpwd" - if [ $# -gt 0 ] && [ "$1" = "dependencies" ]; then - install_packages "$@" || exit 1 - exit 0 - fi + [ $# -gt 0 ] && [ "$1" = "dependencies" ] && x_ xbmkpkg "$@" && exit 0 - id -u 1>/dev/null 2>/dev/null || $err "suid check failed (id -u)" - [ "$(id -u)" != "0" ] || $err "this command as root is not permitted" + id -u 1>/dev/null 2>/dev/null || err "suid check failed (id -u)" + [ "$(id -u)" != "0" ] || err "this command as root is not permitted" - for init_cmd in set_pyver set_env set_version git_init create_tmpdir \ - lock create_pathdirs child_exec; do + for init_cmd in get_version set_env set_threads git_init child_exec; do xbmk_$init_cmd "$@" || break done } -install_packages() +xbmkpkg() { - [ $# -lt 2 ] && $err "fewer than two arguments" + [ $# -lt 2 ] && err "fewer than two arguments" [ $# -gt 2 ] && reinstall="$3" eval "`setcfg "config/dependencies/$2"`" chkvars pkg_add pkglist - $pkg_add $pkglist || $err "Cannot install packages" + x_ $pkg_add $pkglist [ -n "$aur_notice" ] && \ printf "You need AUR packages: %s\n" "$aur_notice" 1>&2; : } -setcfg() +xbmk_get_version() { - [ $# -gt 1 ] && printf "e \"%s\" f missing && return %s;\n" "$1" "$2" - [ $# -gt 1 ] || \ - printf "e \"%s\" f not && %s \"Missing config\";\n" "$1" "$err" - printf ". \"%s\" || %s \"Could not read config\";\n" "$1" "$err" + [ ! -f ".version" ] || read -r version < ".version" || err + [ ! -f ".versiondate" ] || read -r versiondate < ".versiondate" || err + [ ! -f ".version" ] || chkvars version + [ ! -f ".versiondate" ] || chkvars versiondate + + [ ! -e ".git" ] && [ ! -f ".version" ] && version="unknown" + [ ! -e ".git" ] && [ ! -f ".versiondate" ] && versiondate="1716415872" + + [ -n "$version" ] && relname="$projectname-$version"; : } -chkvars() +xbmk_set_env() { - for var in "$@"; do - eval "[ -n \"\${$var+x}\" ] || \$err \"$var unset\"" - eval "[ -n \"\$$var\" ] || \$err \"$var unset\"" - done; : + is_child="n" + + xbmkpath="$PATH" + + # unify all temporary files/directories in a single TMPDIR + [ -z "${TMPDIR+x}" ] || [ "${TMPDIR%_*}" = "/tmp/xbmk" ] || \ + unset TMPDIR + [ -n "${TMPDIR+x}" ] && export TMPDIR="$TMPDIR" && xbtmp="$TMPDIR" + [ -z "${TMPDIR+x}" ] || is_child="y" # child instance, so return + + if [ "$is_child" = "y" ]; then + [ -z "${XBMK_CACHE+x}" ] && err "XBMK_CACHE unset on child" + [ -z "${XBMK_THREADS+x}" ] && xbmk_set_threads + e "lock" f missing && err "lock file absent on child" + return 1 + fi + + [ -f "$xbmklock" ] && err "'$xbmklock' exists. Is a build running?" + touch "$xbmklock" || err "cannot create '$xbmklock'"; : + + # parent instance of xbmk, so don't return. set up TMPDIR + export TMPDIR="/tmp" + export TMPDIR="$(mktemp -d -t xbmk_XXXXXXXX)" + xbtmp="$TMPDIR" + + export XBMK_CACHE="$xbmkpwd/cache" + [ -L "$XBMK_CACHE" ] && [ "$XBMK_CACHE" = "$xbmkpwd/cache" ] && \ + err "cachedir '$xbmkpwd/cache' is a symlink" + [ ! -e "$XBMK_CACHE" ] || \ + [ -d "$XBMK_CACHE" ] || err "cachedir '$XBMK_CACHE' is a file"; : + + export PATH="$XBMK_CACHE/xbmkpath:$XBMK_CACHE/gnupath:$PATH" + xbmkpath="$PATH" + + # if "y": a coreboot target won't be built if target.cfg says release="n" + # (this is used to exclude certain build targets from releases) + [ -z "${XBMK_RELEASE+x}" ] && export XBMK_RELEASE="n" + [ "$XBMK_RELEASE" = "Y" ] && export XBMK_RELEASE="y" + [ "$XBMK_RELEASE" = "y" ] || export XBMK_RELEASE="n" + + xbmk_set_version + export LOCALVERSION="-$projectname-${version%%-*}" + + remkdir "$xbtmp" "$xbloc" "$XBMK_CACHE/gnupath" "$XBMK_CACHE/xbmkpath" + + xbmk_set_pyver +} + +xbmk_set_threads() +{ + [ -z "${XBMK_THREADS+x}" ] && export XBMK_THREADS=1 + expr "X$XBMK_THREADS" : "X-\{0,1\}[0123456789][0123456789]*$" \ + 1>/dev/null 2>/dev/null || export XBMK_THREADS=1 +} + +xbmk_set_version() +{ + version_="$version" + [ ! -e ".git" ] || version="$(git describe --tags HEAD 2>&1)" || \ + version="git-$(git rev-parse HEAD 2>&1)" || version="$version_" + versiondate_="$versiondate" + [ ! -e ".git" ] || versiondate="$(git show --no-patch --no-notes \ + --pretty='%ct' HEAD)" || versiondate="$versiondate_" + + chkvars version versiondate + update_xbmkver "." + + relname="$projectname-$version" } xbmk_set_pyver() @@ -78,13 +142,18 @@ xbmk_set_pyver() pyver="2" && [ "$python" = "python3" ] && pyver="3" pybin "$python" 1>/dev/null || pyver="" [ -z "$pyver" ] || "`pybin "$python"`" -c "$pyv" 1>/dev/null \ - 2>/dev/null || $err "Cannot detect host Python version." - if [ -n "$pyver" ]; then - pyver="$("$(pybin "$python")" -c "$pyv" | awk '{print $1}')" - pyver="${pyver#(}" - pyver="${pyver%,}" - fi - [ "${pyver%%.*}" = "3" ] || $err "Bad python version (must by 3.x)"; : + 2>/dev/null || err "Cannot detect host Python version." + [ -n "$pyver" ] && \ + pyver="$("$(pybin "$python")" -c "$pyv" | awk '{print $1}')" && \ + pyver="${pyver#(}" && pyver="${pyver%,}" + [ "${pyver%%.*}" = "3" ] || err "Bad python version (must by 3.x)" + + ( + # set up python v3.x in PATH, in case it's not set up correctly. + # see code above that detected the correct python3 command. + x_ cd "$XBMK_CACHE/xbmkpath" + x_ ln -s "`pybin "$python"`" python + ) || err "Can't set up python symlink in $XBMK_CACHE/xbmkpath"; : } # Use direct path, to prevent a hang if Python is using a virtual environment, @@ -101,8 +170,7 @@ pybin() # ideally, don't rely on PATH or hardcoded paths if python venv. # use the *real*, direct executable linked to by the venv symlink if [ $venv -gt 0 ] && [ -L "`command -v "$1" 2>/dev/null`" ]; then - # realpath isn't posix, but available mostly universally - pypath="$(realpath \ + pypath="$(findpath \ "$(command -v "$1" 2>/dev/null)" 2>/dev/null || :)" [ -e "$pypath" ] && [ ! -d "$pypath" ] && \ [ -x "$pypath" ] && printf "%s\n" "$pypath" && return 0; : @@ -113,61 +181,20 @@ pybin() [ -e "$pypath/$1" ] && [ ! -d "$pypath/$1" ] && \ [ -x "$pypath/$1" ] && printf "%s/%s\n" "$pypath" "$1" && \ return 0 - done - [ $venv -gt 0 ] && return 1 + done && return 1 # Defer to normal command -v if not a venv command -v "$1" 2>/dev/null || return 1 } -xbmk_set_env() -{ - # XBMK_CACHE is a directory, for caching downloads and git repon - [ -z "${XBMK_CACHE+x}" ] && export XBMK_CACHE="$xbmkpwd/cache" - [ -z "$XBMK_CACHE" ] && export XBMK_CACHE="$xbmkpwd/cache" - [ -L "$XBMK_CACHE" ] && [ "$XBMK_CACHE" = "$xbmkpwd/cache" ] && \ - $err "cachedir '$xbmkpwd/cache' is a symlink" - [ -L "$XBMK_CACHE" ] && export XBMK_CACHE="$xbmkpwd/cache" - [ -f "$XBMK_CACHE" ] && $err "cachedir '$XBMK_CACHE' is a file"; : - - # if "y": a coreboot target won't be built if target.cfg says release="n" - # (this is used to exclude certain build targets from releases) - [ -z "${XBMK_RELEASE+x}" ] && export XBMK_RELEASE="n" - [ "$XBMK_RELEASE" = "y" ] || export XBMK_RELEASE="n" - - [ -z "${XBMK_THREADS+x}" ] && export XBMK_THREADS=1 - expr "X$XBMK_THREADS" : "X-\{0,1\}[0123456789][0123456789]*$" \ - 1>/dev/null 2>/dev/null || export XBMK_THREADS=1; : -} - -xbmk_set_version() -{ - [ ! -f ".version" ] || read -r version < ".version" || :; : - [ ! -f ".versiondate" ] || read -r versiondate < ".versiondate" || :; : - - [ -e ".git" ] || [ -f ".version" ] || printf "unknown\n" > ".version" \ - || $err "Cannot generate unknown .version file" - [ -e ".git" ] || [ -f ".versiondate" ] || printf "1716415872\n" > \ - ".versiondate" || $err "Can't generate unknown versiondate file"; : - - version_="$version" - [ ! -e ".git" ] || version="$(git describe --tags HEAD 2>&1)" || \ - version="git-$(git rev-parse HEAD 2>&1)" || version="$version_" - versiondate_="$versiondate" - [ ! -e ".git" ] || versiondate="$(git show --no-patch --no-notes \ - --pretty='%ct' HEAD)" || versiondate="$versiondate_" - - chkvars version versiondate - printf "%s\n" "$version" > ".version" || $err "can't save version" - printf "%s\n" "$versiondate" > ".versiondate" || $err "can't save date" - - relname="$projectname-$version" - export LOCALVERSION="-$projectname-${version%%-*}" -} - xbmk_git_init() { - [ -L ".git" ] && return 1 + for gitarg in "--global user.name" "--global user.email"; do + gitcmd="git config $gitarg"; $gitcmd 1>/dev/null 2>/dev/null \ + || err "Run this first: $gitcmd \"your ${gitcmd##*.}\"" + done + + [ -L ".git" ] && err "'$xbmkpwd/.git' is a symlink" [ -e ".git" ] && return 0 eval "`setvars "$(date -Rud @$versiondate)" cdate _nogit`" @@ -176,59 +203,15 @@ xbmk_git_init() x_ git commit -m "$projectname $version" --date "$cdate" \ --author="xbmk <xbmk@example.com>" 1>/dev/null 2>/dev/null x_ git tag -a "$version" -m "$projectname $version" 1>/dev/null \ - 2>/dev/null - - for gitarg in "--global user.name" "--global user.email"; do - gitcmd="git config $gitarg"; $gitcmd || $err \ - "Please run this first: $gitcmd \"your ${gitcmd##*.}\"" - done -} - -xbmk_create_tmpdir() -{ - x_ mkdir -p "$xbmklocal" - - # unify all temporary files/directories in a single TMPDIR - [ -z "${TMPDIR+x}" ] || [ "${TMPDIR%_*}" = "/tmp/xbmk" ] || \ - unset TMPDIR - [ -n "${TMPDIR+x}" ] && export TMPDIR="$TMPDIR" && xbmktmp="$TMPDIR" - [ -z "${TMPDIR+x}" ] || return 1 # child instance, so return - - # parent instance of xbmk, so don't return. set up TMPDIR - export TMPDIR="/tmp" - export TMPDIR="$(mktemp -d -t xbmk_XXXXXXXX)" - xbmktmp="$TMPDIR" - - # /tmp might be a tmpfs, so for large files we use ./tmp, - # not to be confused with xbmktmp (xbmktmp points to /tmp) - remkdir "$xbmktmp" "$xbmklocal" -} - -xbmk_lock() -{ - [ -f "lock" ] && $err "$xbmkpwd/lock exists. Is a build running?" - touch lock || $err "cannot create 'lock' file"; : -} - -xbmk_create_pathdirs() -{ - x_ rm -Rf "$XBMK_CACHE/xbmkpath" "$XBMK_CACHE/gnupath" - x_ mkdir -p "$XBMK_CACHE/gnupath" "$XBMK_CACHE/xbmkpath" - export PATH="$XBMK_CACHE/xbmkpath:$XBMK_CACHE/gnupath:$PATH" - ( - # set up python v3.x in PATH, in case it's not set up correctly. - # see code above that detected the correct python3 command. - cd "$XBMK_CACHE/xbmkpath" || $err "can't cd $XBMK_CACHE/xbmkpath" - x_ ln -s "`pybin "$python"`" python - ) || $err "Can't set up python symlink in $XBMK_CACHE/xbmkpath"; : + 2>/dev/null; : } xbmk_child_exec() { xbmk_rval=0 ( x_ ./mk "$@" ) || xbmk_rval=1 - rm -Rf "$xbmklocal" "$xbmktmp" || xbmk_rval=1 - rm -f lock || xbmk_rval=1 + ( x_ rm -Rf "$xbloc" "$xbtmp" ) || xbmk_rval=1 + ( x_ rm -f "$xbmklock" ) || xbmk_rval=1 exit $xbmk_rval } diff --git a/include/inject.sh b/include/inject.sh index 9bfda2db..795b2c70 100644 --- a/include/inject.sh +++ b/include/inject.sh @@ -3,304 +3,25 @@ # Copyright (c) 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> # Copyright (c) 2023-2025 Leah Rowe <leah@libreboot.org> -e6400_unpack="$xbmkpwd/src/bios_extract/dell_inspiron_1100_unpacker.py" -me7updateparser="$xbmkpwd/util/me7_update_parser/me7_update_parser.py" -pfs_extract="$xbmkpwd/src/biosutilities/Dell_PFS_Extract.py" -uefiextract="$xbmkpwd/elf/uefitool/uefiextract" -vendir="vendorfiles" -appdir="$vendir/app" cbcfgsdir="config/coreboot" -hashfiles="vendorhashes blobhashes" # blobhashes for backwards compatibility -dontflash="!!! AN ERROR OCCURED! Please DO NOT flash if injection failed. !!!" -vfix="DO_NOT_FLASH_YET._FIRST,_INJECT_FILES_VIA_INSTRUCTIONS_ON_LIBREBOOT.ORG_" -vguide="https://libreboot.org/docs/install/ivy_has_common.html" -tmpromdel="$xbmklocal/DO_NOT_FLASH" +tmpromdel="$XBMK_CACHE/DO_NOT_FLASH" nvm="util/nvmutil/nvm" -ifdtool="elf/ifdtool/default/ifdtool" +ifdtool="elf/coreboot/default/ifdtool" -cvchk="CONFIG_HAVE_MRC CONFIG_HAVE_ME_BIN CONFIG_KBC1126_FIRMWARE \ - CONFIG_VGA_BIOS_FILE CONFIG_INCLUDE_SMSC_SCH5545_EC_FW \ - CONFIG_LENOVO_TBFW_BIN CONFIG_FSP_M_FILE CONFIG_FSP_S_FILE" +cv="CONFIG_GBE_BIN_PATH" +[ -n "$cvxbmk" ] && cv="$cv $cvxbmk" +[ -n "$cvchk" ] && cv="$cv $cvchk" -cv="CONFIG_ME_BIN_PATH CONFIG_SMSC_SCH5545_EC_FW_FILE CONFIG_KBC1126_FW1 \ - CONFIG_KBC1126_FW2 CONFIG_KBC1126_FW1_OFFSET CONFIG_KBC1126_FW2_OFFSET \ - CONFIG_VGA_BIOS_ID CONFIG_BOARD_DELL_E6400 CONFIG_FSP_S_CBFS \ - CONFIG_HAVE_REFCODE_BLOB CONFIG_REFCODE_BLOB_FILE CONFIG_GBE_BIN_PATH \ - CONFIG_IFD_BIN_PATH CONFIG_FSP_FD_PATH CONFIG_MRC_FILE CONFIG_FSP_M_CBFS \ - CONFIG_FSP_USE_REPO CONFIG_FSP_FULL_FD $cvchk" - -eval "`setvars "" has_hashes EC_hash DL_hash DL_url_bkup MRC_refcode_gbe vcfg \ - E6400_VGA_DL_hash E6400_VGA_DL_url E6400_VGA_DL_url_bkup E6400_VGA_offset \ - E6400_VGA_romname SCH5545EC_DL_url_bkup SCH5545EC_DL_hash _dest tree \ - mecleaner kbc1126_ec_dump MRC_refcode_cbtree new_mac _dl SCH5545EC_DL_url \ - archive EC_url boarddir rom cbdir DL_url nukemode cbfstoolref FSPFD_hash \ - _7ztest ME11bootguard ME11delta ME11version ME11sku ME11pch tmpromdir \ - IFD_platform ifdprefix cdir sdir _me _metmp mfs TBFW_url_bkup TBFW_url \ - TBFW_hash TBFW_size hashfile xromsize xchanged EC_url_bkup need_files \ - vfile cbcfg $cv`" - -download() -{ - [ $# -gt 0 ] || $err "No argument given" - export PATH="$PATH:/sbin" - board="$1" && readcfg && readkconfig && bootstrap && getfiles; : -} - -readkconfig() -{ - x_ rm -f "$xbmktmp/cbcfg" - cbcfg="`check_defconfig "$boarddir"`" || for cbc in $cv; do - grep "$cbc" "$cbcfg" 1>>"$xbmktmp/cbcfg" 2>/dev/null || : - done - eval "`setcfg "$xbmktmp/cbcfg" 1`" - - for c in $cvchk; do - eval "[ \"\${$c}\" = \"/dev/null\" ] && continue" - eval "[ -z \"\${$c}\" ] && continue" - eval "`setcfg "$vfile"`" - return 0 - done - return 1 -} - -bootstrap() -{ - x_ ./mk -f coreboot ${cbdir##*/} - mk -b uefitool biosutilities bios_extract - [ -d "${kbc1126_ec_dump%/*}" ] && x_ make -C "$cbdir/util/kbc1126" - [ -n "$MRC_refcode_cbtree" ] && \ - cbfstoolref="elf/cbfstool/$MRC_refcode_cbtree/cbfstool" && \ - x_ ./mk -d coreboot "$MRC_refcode_cbtree"; : -} - -getfiles() -{ - [ -z "$CONFIG_HAVE_ME_BIN" ] || fetch intel_me "$DL_url" \ - "$DL_url_bkup" "$DL_hash" "$CONFIG_ME_BIN_PATH" - [ -z "$CONFIG_INCLUDE_SMSC_SCH5545_EC_FW" ] || fetch sch5545ec \ - "$SCH5545EC_DL_url" "$SCH5545EC_DL_url_bkup" "$SCH5545EC_DL_hash" \ - "$CONFIG_SMSC_SCH5545_EC_FW_FILE" - [ -z "$CONFIG_KBC1126_FIRMWARE" ] || fetch kbc1126ec "$EC_url" \ - "$EC_url_bkup" "$EC_hash" "$CONFIG_KBC1126_FW1" - [ -z "$CONFIG_VGA_BIOS_FILE" ] || fetch e6400vga "$E6400_VGA_DL_url" \ - "$E6400_VGA_DL_url_bkup" "$E6400_VGA_DL_hash" "$CONFIG_VGA_BIOS_FILE" - [ -z "$CONFIG_HAVE_MRC" ] || fetch "mrc" "$MRC_url" "$MRC_url_bkup" \ - "$MRC_hash" "$CONFIG_MRC_FILE" - [ -n "$CONFIG_REFCODE_BLOB_FILE" ] && fetch "refcode" "$MRC_url" \ - "$MRC_url_bkup" "$MRC_hash" "$CONFIG_REFCODE_BLOB_FILE" - [ -z "$CONFIG_LENOVO_TBFW_BIN" ] || fetch "tbfw" "$TBFW_url" \ - "$TBFW_url_bkup" "$TBFW_hash" "$CONFIG_LENOVO_TBFW_BIN" - # - # in the future, we might have libre fsp-s and then fsp-m. - # therefore, handle them separately, in case one of them is libre; if - # one of them was, the path wouldn't be set. - # - [ -z "$CONFIG_FSP_M_FILE" ] || fetch "fsp" "$CONFIG_FSP_FD_PATH" \ - "$CONFIG_FSP_FD_PATH" "$FSPFD_hash" "$CONFIG_FSP_M_FILE" copy - [ -z "$CONFIG_FSP_S_FILE" ] || fetch "fsp" "$CONFIG_FSP_FD_PATH" \ - "$CONFIG_FSP_FD_PATH" "$FSPFD_hash" "$CONFIG_FSP_S_FILE" copy; : -} - -fetch() -{ - dl_type="$1" - dl="$2" - dl_bkup="$3" - dlsum="$4" - _dest="${5##*../}" - - [ "$5" = "/dev/null" ] && return 0 - _dl="$XBMK_CACHE/file/$dlsum" - # HACK: if grabbing fsp from coreboot, fix the path for lbmk - [ "$dl_type" = "fsp" ] && for _cdl in dl dl_bkup; do - eval "$_cdl=\"\${$_cdl##*../}\"; _cdp=\"\$$_cdl\"" - [ -f "$_cdp" ] || _cdp="$cbdir/$_cdp" - [ -f "$_cdp" ] && eval "$_cdl=\"$_cdp\"" - done; : - - dlop="curl" && [ $# -gt 5 ] && dlop="$6" - xbmkget "$dl" "$dl_bkup" "$_dl" "$dlsum" "$dlop" - - rm -Rf "${_dl}_extracted" || $err "!rm ${_ul}_extracted. $dontflash" - e "$_dest" f && return 0 - - x_ mkdir -p "${_dest%/*}" - remkdir "$appdir" - extract_archive "$_dl" "$appdir" "$dl_type" || \ - [ "$dl_type" = "e6400vga" ] || $err "$_dest $dl_type: !extract" - - eval "extract_$dl_type" - set -u -e - e "$_dest" f missing && $err "!extract_$dl_type. $dontflash"; : -} - -extract_intel_me() -{ - e "$mecleaner" f not && $err "$cbdir: me_cleaner missing. $dontflash" - - cdir="$xbmkpwd/$appdir" - _me="$xbmkpwd/$_dest" - _metmp="$xbmklocal/me.bin" - - mfs="" && [ "$ME11bootguard" = "y" ] && mfs="--whitelist MFS" && \ - chkvars ME11delta ME11version ME11sku ME11pch - [ "$ME11bootguard" = "y" ] && x_ ./mk -f deguard - - extract_intel_me_bruteforce - if [ "$ME11bootguard" = "y" ]; then - apply_me11_deguard_mod - else - mv "$_metmp" "$_me" || $err "!mv $_metmp $_me - $dontflash" - fi -} - -extract_intel_me_bruteforce() -{ - [ $# -gt 0 ] && cdir="$1" - e "$_metmp" f && return 0 - - [ -z "$sdir" ] && sdir="$(mktemp -d)" - x_ mkdir -p "$sdir" - - set +u +e - ( - [ "${cdir#/a}" != "$cdir" ] && cdir="${cdir#/}" - cd "$cdir" || $err "extract_intel_me: !cd \"$cdir\" - $dontflash" - for i in *; do - e "$_metmp" f && break - [ -L "$i" ] && continue - if [ -f "$i" ]; then - _r="-r" && [ -n "$mfs" ] && _r="" - "$mecleaner" $mfs $_r -t -O "$sdir/vendorfile" \ - -M "$_metmp" "$i" && break - "$mecleaner" $mfs $_r -t -O "$_metmp" "$i" && break - "$me7updateparser" -O "$_metmp" "$i" && break - _7ztest="${_7ztest}a" - extract_archive "$i" "$_7ztest" || continue - extract_intel_me_bruteforce "$cdir/$_7ztest" - elif [ -d "$i" ]; then - extract_intel_me_bruteforce "$cdir/$i" - else - continue - fi - cdir="$1"; [ "${cdir#/a}" != "$cdir" ] && cdir="${cdir#/}" - cd "$cdir" || : - done - ) || : - rm -Rf "$sdir" || $err "extract_intel_me: !rm -Rf $sdir - $dontflash" -} - -apply_me11_deguard_mod() -{ - ( - x_ cd src/deguard/ - x_ ./finalimage.py --delta "data/delta/$ME11delta" \ - --version "$ME11version" \ - --pch "$ME11pch" --sku "$ME11sku" --fake-fpfs data/fpfs/zero \ - --input "$_metmp" --output "$_me" - ) || $err "Error running deguard for $_me - $dontflash" -} - -extract_archive() -{ - [ $# -gt 2 ] && [ "$3" = "fsp" ] && x_ python \ - "$cbdir/3rdparty/fsp/Tools/SplitFspBin.py" split -f "$1" -o "$2" \ - -n "Fsp.fd" && return 0 - - innoextract "$1" -d "$2" || python "$pfs_extract" "$1" -e || 7z x \ - "$1" -o"$2" || unar "$1" -o "$2" || unzip "$1" -d "$2" || return 1 - - [ ! -d "${_dl}_extracted" ] || x_ cp -R "${_dl}_extracted" "$2"; : -} - -extract_kbc1126ec() -{ - x_ e "$kbc1126_ec_dump" f - ( - x_ cd "$appdir/" - mv Rompaq/68*.BIN ec.bin || : - if [ ! -f "ec.bin" ]; then - unar -D ROM.CAB Rom.bin || unar -D Rom.CAB Rom.bin || \ - unar -D 68*.CAB Rom.bin || $err "kbc1126 unar failed" - x_ mv Rom.bin ec.bin - fi - x_ e ec.bin f && x_ "$kbc1126_ec_dump" ec.bin - ) || $err "$board: can't extract kbc1126 ec firmware - $dontflash" - - x_ e "$appdir/ec.bin.fw1" f && x_ e "$appdir/ec.bin.fw2" f - x_ cp "$appdir/"ec.bin.fw* "${_dest%/*}/" -} - -extract_e6400vga() -{ - set +u +e - chkvars E6400_VGA_offset E6400_VGA_romname - tail -c +$E6400_VGA_offset "$_dl" | gunzip > "$appdir/bios.bin" || : - ( - x_ cd "$appdir" - x_ e "bios.bin" f - "$e6400_unpack" bios.bin || printf "TODO: fix dell extract util\n" - ) || $err "can't extract e6400 vga rom - $dontflosh" - x_ cp "$appdir/$E6400_VGA_romname" "$_dest" -} - -extract_sch5545ec() -{ - # full system ROM (UEFI), to extract with UEFIExtract: - _bios="${_dl}_extracted/Firmware/1 $dlsum -- 1 System BIOS vA.28.bin" - # this is the SCH5545 firmware, inside of the extracted UEFI ROM: - _sch5545ec_fw="$_bios.dump/4 7A9354D9-0468-444A-81CE-0BF617D890DF" - _sch5545ec_fw="$_sch5545ec_fw/54 D386BEB8-4B54-4E69-94F5-06091F67E0D3" - _sch5545ec_fw="$_sch5545ec_fw/0 Raw section/body.bin" # <-- this! - - "$uefiextract" "$_bios" || $err "sch5545 !extract - $dontflash" - x_ cp "$_sch5545ec_fw" "$_dest" -} - -# Lenovo ThunderBolt firmware updates: -# https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t480-type-20l5-20l6/20l5/solutions/ht508988 -extract_tbfw() -{ - chkvars TBFW_size - fe_ copy_tbfw "$appdir" -type f -name "TBT.bin" - [ -f "$_dest" ] || $err "$board: Could not extract tbfw"; : -} - -copy_tbfw() -{ - [ -f "$1" ] || return 0 - [ -L "$1" ] && return 0 - - x_ dd if=/dev/null of="$1" bs=1 seek=$TBFW_size - x_ mv "$1" "$_dest" - - return 1 -} - -extract_fsp() -{ - x_ cp "$appdir/"Fsp_*.fd "${_dest%/*}" -} - -fail_inject() -{ - [ -L "$tmpromdel" ] || [ ! -d "$tmpromdel" ] || \ - rm -Rf "$tmpromdel" || : - printf "\n\n%s\n\n" "$dontflash" 1>&2 - printf "WARNING: File '%s' was NOT modified.\n\n" "$archive" 1>&2 - printf "Please MAKE SURE vendor files are inserted before flashing\n\n" - err_ "$1" -} +eval "`setvars "" archive boarddir IFD_platform ifdprefix tree new_mac \ + tmpromdir board xchanged $cv`" inject() { - need_files="n" - err="fail_inject" remkdir "$tmpromdel" set +u +e - [ $# -lt 1 ] && $err "No options specified. - $dontflash" - eval "`setvars "" nukemode new_mac xchanged`" + [ $# -lt 1 ] && err "No options specified" + eval "`setvars "" nuke new_mac xchanged`" archive="$1"; new_mac="xx:xx:xx:xx:xx:xx" @@ -308,248 +29,120 @@ inject() [ $# -gt 1 ] && case "$2" in nuke) new_mac="" - nukemode="nuke" ;; + nuke="nuke" ;; setmac) [ $# -gt 2 ] && new_mac="$3" && \ - [ -z "$new_mac" ] && $err "Empty MAC address specified" ;; - *) $err "Unrecognised inject mode: '$2'" + [ -z "$new_mac" ] && err "Empty MAC address specified" ;; + *) + err "Unrecognised inject mode: '$2'" esac [ "$new_mac" = "keep" ] && new_mac="" - [ -n "$new_mac" ] && [ "$new_mac" != "restore" ] && \ - x_ make -C util/nvmutil clean && x_ make -C util/nvmutil + check_release + check_target && patch_release - check_release "$archive" || $err "'$archive' is not a release archive" + [ "$xchanged" = "y" ] && remktar - readcfg && need_files="y" - if [ "$need_files" = "y" ] || [ -n "$new_mac" ]; then - [ "$nukemode" != "nuke" ] && [ "$need_files" = "y" ] && \ - x_ ./mk download "$board" - patch_release_roms - fi + xnot=" NOT" && [ "$xchanged" = "y" ] && xnot="" + printf "\n'%s' was%s modified\n" "$archive" "$xnot" 1>&2 - xtype="patched" && [ "$nukemode" = "nuke" ] && xtype="nuked" - [ "$xchanged" != "y" ] && printf "\n'%s' *NOT* modified.\n" "$archive" - [ "$xchanged" = "y" ] && printf "\n'%s' %s.\n" "$archive" "$xtype"; : + x_ rm -Rf "$tmpromdel" } check_release() { - [ -L "$archive" ] && $err "'$archive' is a symlink. $dontflash" - e "$archive" f missing && return 1 + [ -L "$archive" ] && err "'$archive' is a symlink" + e "$archive" f missing && err "'$archive' missing" - archivename="`basename "$archive"`" - [ -z "$archivename" ] && $err "Can't determine archive name. $dontflash" + archivename="`basename "$archive"`" || err "Can't get '$archive' name" + [ -z "$archivename" ] && err "Can't determine archive name" case "$archivename" in *_src.tar.xz) - $err "'$archive' is a src archive, silly!" ;; + err "'$archive' is a src archive, silly!" ;; grub_*|seagrub_*|custom_*|seauboot_*|seabios_withgrub_*) - return 1 ;; + err "'$archive' is a ROM image (it must be a tarball)" ;; *.tar.xz) _stripped_prefix="${archivename#*_}" board="${_stripped_prefix%.tar.xz}" ;; - *) $err "'$archive': could not detect board type - $dontflash" + *) + err "'$archive': could not detect board type" ;; esac; : } -readcfg() +check_target() { - if [ "$board" = "serprog_rp2040" ] || [ "$board" = "serprog_stm32" ] \ - || [ "$board" = "serprog_pico" ]; then - return 1 - fi + [ "$board" = "${board#serprog_}" ] || return 1 boarddir="$cbcfgsdir/$board" eval "`setcfg "$boarddir/target.cfg"`" chkvars tree && x_ ./mk -d coreboot "$tree" - [ -z "$vcfg" ] && return 1 - - vfile="config/vendor/$vcfg/pkg.cfg" - [ -L "$vfile" ] && $err "'$archive', '$board': $vfile is a symlink" - [ -f "$vfile" ] || $err "'$archive', '$board': $vfile doesn't exist" - - cbdir="src/coreboot/$tree" - cbfstool="elf/cbfstool/$tree/cbfstool" - rmodtool="elf/cbfstool/$tree/rmodtool" - mecleaner="$xbmkpwd/$cbdir/util/me_cleaner/me_cleaner.py" - kbc1126_ec_dump="$xbmkpwd/$cbdir/util/kbc1126/kbc1126_ec_dump" - cbfstool="elf/cbfstool/$tree/cbfstool" - ifdtool="elf/ifdtool/$tree/ifdtool" + ifdtool="elf/coreboot/$tree/ifdtool" [ -n "$IFD_platform" ] && ifdprefix="-p $IFD_platform"; : } -patch_release_roms() +patch_release() { + [ "$nuke" = "nuke" ] || x_ ./mk download "$board" + has_hashes="n" - tmpromdir="$xbmklocal/DO_NOT_FLASH/bin/$board" + tmpromdir="$tmpromdel/bin/$board" remkdir "${tmpromdir%"/bin/$board"}" x_ tar -xf "$archive" -C "${tmpromdir%"/bin/$board"}" - for _hashes in $hashfiles; do - [ "$need_files" = "y" ] || break - e "$tmpromdir/$_hashes" f && has_hashes="y" && \ - hashfile="$_hashes" && break; : + for _hashes in "vendorhashes" "blobhashes"; do + e "$tmpromdir/$_hashes" f && \ + has_hashes="y" && hashfile="$_hashes" && break; : done - if readkconfig; then - fe_ prep_rom "$tmpromdir" -maxdepth 1 -type f -name "*.rom" - [ "$nukemode" != "nuke" ] || \ - printf "Make sure you inserted vendor files: %s\n" \ - "$vguide" > "$tmpromdir/README.md" || : - else - printf "Skipping vendorfiles on '%s'\n" "$archive" 1>&2 - need_files="n" - fi - - ( - [ "$need_files" = "y" ] || exit 0 - cd "$tmpromdir" || $err "patch '$archive': can't cd $tmpromdir" - # NOTE: For compatibility with older rom releases, defer to sha1 - if [ "$has_hashes" = "y" ] && [ "$nukemode" != "nuke" ]; then - sha512sum --status -c "$hashfile" || \ - x_ sha1sum --status -c "$hashfile" - x_ rm -f "$hashfile" - fi - ) || $err "'$archive' -> Can't verify vendor hashes. $dontflash" - - [ -z "$new_mac" ] || modify_mac || printf "\nGbE not defined\n" 1>&2 - - [ "$xchanged" = "y" ] || rm -Rf "$tmpromdel" || : - [ "$xchanged" = "y" ] || return 0 - - ( - x_ cd "${tmpromdir%"/bin/$board"}" - mkrom_tarball "bin/$board" - ) || $err "Cannot re-generate '$archive' - $dontflash" - - mv "${tmpromdir%"/bin/$board"}/bin/${relname}_${board}.tar.xz" \ - "$archive" || $err "'$archive' -> Can't overwrite - $dontflash"; : -} - -prep_rom() -{ - _xrom="$1" - _xromname="${1##*/}" - _xromnew="${_xrom%/*}/${_xromname#"$vfix"}" - [ "$nukemode" = "nuke" ] && _xromnew="${_xrom%/*}/$vfix${_xrom##*/}" - - e "$_xrom" f missing && return 0 - [ -z "${_xromname#"$vfix"}" ] && $err "$_xromname / $vfix: name match" - - # Remove the prefix and 1-byte pad - if [ "$nukemode" != "nuke" ] && \ - [ "${_xromname#"$vfix"}" != "$_xromname" ]; then - xromsize="$(expr $(stat -c '%s' "$_xrom") - 1)" || $err "!int" - [ $xromsize -lt 524288 ] && $err "too small, $xromsize: $_xrom" - - x_ dd if="$_xrom" of="$_xromnew" bs=$xromsize count=1 - rm -f "$_xrom" || $err "Can't rm $_xrom - $dontflash" + readkconfig || exit 0 - _xrom="$_xromnew" - fi - - [ "$nukemode" = "nuke" ] && mksha512sum "$_xrom" "vendorhashes" - - patch_rom "$_xrom" || return 1 # if break return, can still change MAC - [ "$nukemode" != "nuke" ] && return 0 - - # Rename the file, prefixing a warning saying not to flash - cat "$_xrom" config/data/coreboot/0 > "$_xromnew" || $err "!pad $_xrom" - x_ rm -f "$_xrom" + [ -n "$new_mac" ] && [ -n "$CONFIG_GBE_BIN_PATH" ] && modify_mac; : } -patch_rom() +readkconfig() { - rom="$1" - - if [ "$has_hashes" != "y" ] && [ "$nukemode" != "nuke" ]; then - printf "'%s' has no hash file. Skipping.\n" "$archive" 1>&2 - return 1 - elif [ "$has_hashes" = "y" ] && [ "$nukemode" = "nuke" ]; then - printf "'%s' has a hash file. Skipping nuke.\n" "$archive" 1>&2 - return 1 - fi - - [ -n "$CONFIG_HAVE_REFCODE_BLOB" ] && insert "fallback/refcode" \ - "$CONFIG_REFCODE_BLOB_FILE" "stage" - [ "$CONFIG_HAVE_MRC" = "y" ] && insert "mrc.bin" "$CONFIG_MRC_FILE" \ - "mrc" "0xfffa0000" - [ "$CONFIG_HAVE_ME_BIN" = "y" ] && insert IFD "$CONFIG_ME_BIN_PATH" me - [ "$CONFIG_KBC1126_FIRMWARE" = "y" ] && insert ecfw1.bin \ - "$CONFIG_KBC1126_FW1" raw "$CONFIG_KBC1126_FW1_OFFSET" && insert \ - ecfw2.bin "$CONFIG_KBC1126_FW2" raw "$CONFIG_KBC1126_FW2_OFFSET" - [ -n "$CONFIG_VGA_BIOS_FILE" ] && [ -n "$CONFIG_VGA_BIOS_ID" ] && \ - insert "pci$CONFIG_VGA_BIOS_ID.rom" "$CONFIG_VGA_BIOS_FILE" optionrom - [ "$CONFIG_INCLUDE_SMSC_SCH5545_EC_FW" = "y" ] && \ - [ -n "$CONFIG_SMSC_SCH5545_EC_FW_FILE" ] && \ - insert sch5545_ecfw.bin "$CONFIG_SMSC_SCH5545_EC_FW_FILE" raw - [ -z "$CONFIG_FSP_USE_REPO" ] && [ -z "$CONFIG_FSP_FULL_FD" ] && \ - [ -n "$CONFIG_FSP_M_FILE" ] && \ - insert "$CONFIG_FSP_M_CBFS" "$CONFIG_FSP_M_FILE" fsp --xip - [ -z "$CONFIG_FSP_USE_REPO" ] && [ -z "$CONFIG_FSP_FULL_FD" ] && \ - [ -n "$CONFIG_FSP_S_FILE" ] && \ - insert "$CONFIG_FSP_S_CBFS" "$CONFIG_FSP_S_FILE" fsp - - printf "ROM image successfully patched: %s\n" "$rom" - xchanged="y" + x_ rm -f "$xbtmp/cbcfg" + fx_ scankconfig x_ find "$boarddir/config" -type f + eval "`setcfg "$xbtmp/cbcfg" 1`" + setvfile "$@" || return 1; : } -insert() +scankconfig() { - [ "$2" = "/dev/null" ] && return 0 - - cbfsname="$1" - _dest="${2##*../}" - _t="$3" - - _offset="" - - if [ "$_t" = "fsp" ] && [ $# -gt 3 ]; then - _offset="$4" - elif [ $# -gt 3 ] && _offset="-b $4" && [ -z "$4" ]; then - $err "insert $*, $rom: offset given but empty (undefined)" - fi - - [ "$nukemode" = "nuke" ] || x_ e "$_dest" f - - if [ "$cbfsname" = "IFD" ]; then - [ "$nukemode" = "nuke" ] || "$ifdtool" $ifdprefix -i \ - $_t:$_dest "$rom" -O "$rom" || \ - $err "failed: insert '$_t' '$_dest' on '$rom'" - [ "$nukemode" != "nuke" ] || "$ifdtool" $ifdprefix --nuke $_t \ - "$rom" -O "$rom" || $err "$rom: !nuke IFD/$_t" - elif [ "$nukemode" = "nuke" ]; then - x_ "$cbfstool" "$rom" remove -n "$cbfsname" - elif [ "$_t" = "stage" ]; then # the only stage we handle is refcode - x_ rm -f "$xbmklocal/refcode" - "$rmodtool" -i "$_dest" -o "$xbmklocal/refcode" || "!reloc ref" - "$cbfstool" "$rom" add-stage -f "$xbmklocal/refcode" \ - -n "$cbfsname" -t stage || $err "$rom: !add ref" - else - "$cbfstool" "$rom" add -f "$_dest" -n "$cbfsname" \ - -t $_t $_offset || $err "$rom !add $_t ($_dest)" - fi - xchanged="y"; : + for cbc in $cv; do + grep "$cbc" "$1" 1>>"$xbtmp/cbcfg" 2>/dev/null || : + done } modify_mac() { - [ -n "$CONFIG_GBE_BIN_PATH" ] || return 1 - - x_ cp "${CONFIG_GBE_BIN_PATH##*../}" "$xbmklocal/gbe" + x_ cp "${CONFIG_GBE_BIN_PATH##*../}" "$xbloc/gbe" [ -n "$new_mac" ] && [ "$new_mac" != "restore" ] && \ - x_ "$nvm" "$xbmklocal/gbe" setmac "$new_mac" + x_ make -C util/nvmutil clean && x_ make -C util/nvmutil && \ + x_ "$nvm" "$xbloc/gbe" setmac "$new_mac" - fe_ newmac "$tmpromdir" -maxdepth 1 -type f -name "*.rom" + fx_ newmac x_ find "$tmpromdir" -maxdepth 1 -type f -name "*.rom" - printf "\nGbE NVM written to '%s':\n" "$archive" - x_ "$nvm" "$xbmklocal/gbe" dump | grep -v "bytes read from file" || : + printf "\nThe following GbE NVM data will be written:\n" + x_ "$nvm" "$xbloc/gbe" dump | grep -v "bytes read from file" || : } newmac() { e "$1" f && xchanged="y" && x_ \ - "$ifdtool" $ifdprefix -i GbE:"$xbmklocal/gbe" "$1" -O "$1"; : + "$ifdtool" $ifdprefix -i GbE:"$xbloc/gbe" "$1" -O "$1"; : +} + +remktar() +{ + ( + x_ cd "${tmpromdir%"/bin/$board"}" + printf "Re-building tar archive (please wait)\n" + mkrom_tarball "bin/$board" 1>/dev/null + ) || err "Cannot re-generate '$archive'" + + mv "${tmpromdir%"/bin/$board"}/bin/${relname}_${board}.tar.xz" \ + "$archive" || err "'$archive' -> Can't overwrite"; : } diff --git a/include/lib.sh b/include/lib.sh index d58716c3..b40772fa 100644 --- a/include/lib.sh +++ b/include/lib.sh @@ -4,8 +4,8 @@ # Copyright (c) 2020-2025 Leah Rowe <leah@libreboot.org> # Copyright (c) 2025 Alper Nebi Yasak <alpernebiyasak@gmail.com> -cbfstool="elf/cbfstool/default/cbfstool" -rmodtool="elf/cbfstool/default/rmodtool" +cbfstool="elf/coreboot/default/cbfstool" +rmodtool="elf/coreboot/default/rmodtool" remkdir() { @@ -15,75 +15,22 @@ remkdir() mkrom_tarball() { - printf "%s\n" "$version" > "$1/.version" || $err "$1 !version" - printf "%s\n" "$versiondate" > "$1/.versiondate" || $err "$1 !vdate" - + update_xbmkver "$1" mktarball "$1" "${1%/*}/${relname}_${1##*/}.tar.xz" x_ rm -Rf "$1" } -mktarball() -{ - printf "Creating tar archive '%s' from directory '%s'\n" "$2" "$1" - [ "${2%/*}" = "$2" ] || x_ mkdir -p "${2%/*}" - x_ tar -c "$1" | xz -T$XBMK_THREADS -9e > "$2" || $err "mktarball2, $1" -} - -mksha512sum() -{ - ( - [ "${1%/*}" != "$1" ] && x_ cd "${1%/*}" - sha512sum ./"${1##*/}" >> "$2" || $err "!sha512sum \"$1\" > \"$2\"" - ) || $err "failed to create tarball checksum" -} - -rmgit() +update_xbmkver() { - x_ find "$1" -name ".git" -exec rm -Rf {} + - x_ find "$1" -name ".gitmodules" -exec rm -Rf {} + + printf "%s\n" "$version" > "$1/.version" || err "$1 !version"; : + printf "%s\n" "$versiondate" > "$1/.versiondate" || err "$1 !vdate"; : } -# can grab from the internet, or copy locally. -# if copying locally, it can only copy a file. -xbmkget() -{ - _ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0" - - _dlop="curl" && [ $# -gt 4 ] && _dlop="$5" - cached="$XBMK_CACHE/file/$4" - dl_fail="n" # 1 url, 2 url backup, 3 destination, 4 checksum - bad_checksum "$4" "$cached" 2>/dev/null && dl_fail="y" - [ "$dl_fail" = "n" ] && e "$3" f && return 0 - x_ mkdir -p "${3%/*}" "$XBMK_CACHE/file" - for url in "$1" "$2"; do - [ "$dl_fail" = "n" ] && break - [ -z "$url" ] && continue - rm -f "$cached" || $err "!rm -f '$cached'" - if [ "$_dlop" = "curl" ]; then - curl --location --retry 3 -A "$_ua" "$url" \ - -o "$cached" || wget --tries 3 -U "$_ua" "$url" \ - -O "$cached" || continue - elif [ "$_dlop" = "copy" ]; then - [ -L "$url" ] && \ - printf "dl %s %s %s %s: '%s' is a symlink\n" \ - "$1" "$2" "$3" "$4" "$url" 1>&2 && continue - [ ! -f "$url" ] && \ - printf "dl %s %s %s %s: '%s' not a file\n" \ - "$1" "$2" "$3" "$4" "$url" 1>&2 && continue - cp "$url" "$cached" || continue - else - $err "$1 $2 $3 $4: Unsupported dlop type: '$_dlop'" - fi - bad_checksum "$4" "$cached" || dl_fail="n" - done - [ "$dl_fail" = "y" ] && $err "$1 $2 $3 $4: not downloaded" - [ "$cached" = "$3" ] || x_ cp "$cached" "$3"; : -} - -bad_checksum() +mktarball() { - [ "$(sha512sum "$2" | awk '{print $1}')" != "$1" ] || return 1 - printf "Bad checksum for file: %s\n" "$2" 1>&2; rm -f "$2" || :; : + printf "Creating tar archive '%s' from directory '%s'\n" "$2" "$1" + [ "${2%/*}" = "$2" ] || x_ mkdir -p "${2%/*}" + x_ tar -c "$1" | xz -T$XBMK_THREADS -9e > "$2" || err "mktarball2, $1" } e() @@ -97,67 +44,81 @@ e() printf "%s %s\n" "$1" "$es2" 1>&2 } -mk() -{ - mk_flag="$1" || $err "No argument given" - shift 1 && for mk_arg in "$@"; do - x_ ./mk $mk_flag $mk_arg - done; : -} - -check_defconfig() -{ - [ -d "$1" ] || $err "Target '$1' not defined." - for x in "$1"/config/*; do - [ -f "$x" ] && printf "%s\n" "$x" && return 1 - done; : -} - setvars() { _setvars="" if [ $# -lt 2 ]; then - printf "\$err \"setvars: too few args\\n\"" + printf "err \"setvars: too few args\\n\"" return 0 fi val="$1" shift 1 - for var in "$@"; do - _setvars="$var=\"$val\"; $_setvars" + while [ $# -gt 0 ]; do + printf "%s=\"%s\"\n" "$1" "$val" + shift 1 done - printf "%s\n" "${_setvars% }" } -fe_() +setcfg() { - find_ex "x_" "$@" + [ $# -gt 1 ] && printf "e \"%s\" f missing && return %s;\n" "$1" "$2" + [ $# -gt 1 ] || \ + printf "e \"%s\" f not && err \"Missing config\";\n" "$1" + printf ". \"%s\" || err \"Could not read config\";\n" "$1" } -fx_() +chkvars() { - find_ex "" "$@" + while [ $# -gt 0 ]; do + eval "[ -n \"\${$1+x}\" ] || err \"$1 unset\"" + eval "[ -n \"\$$1\" ] || err \"$1 unset\"; shift 1; :" + done; : } -find_ex() +# return 0 if project is single-tree, otherwise 1 +# e.g. coreboot is multi-tree, so 1 +singletree() +{ + ( fx_ "eval exit 1 && err" find "config/$1/"*/ -type f \ + -name "target.cfg" ) || return 1; : +} + +findpath() +{ + [ $# -gt 0 ] || err "findpath: No arguments provided" + while [ $# -gt 0 ]; do + found="`readlink -f "$1" 2>/dev/null`" || return 1; : + [ -n "$found" ] || found="`realpath "$1" 2>/dev/null`" || \ + return 1; : + printf "%s\n" "$found" + shift 1 + done +} + +fx_() { - errx="$1" && shift 1 fd="`mktemp`" && x_ rm -f "$fd" && x_ touch "$fd" xx="$1" && shift 1 - $errx find "$@" 2>/dev/null | sort > "$fd" || \ - $err "!find $(echo "$@") > \"$fd\"" - while read -r fx; do - "$xx" "$fx" || break; : - done < "$fd" + "$@" 2>/dev/null | sort 1>"$fd" 2>/dev/null || err "FATAL: !sort fx_" + dx_ "$xx" "$fd" || break x_ rm -f "$fd" } +dx_() +{ + [ ! -f "$2" ] || while read -r fx; do + $1 "$fx" || return 1; : + done < "$2" || err "dx_ $*: cannot read '$2'"; : +} + x_() { - [ $# -lt 1 ] || "$@" || $err "Unhandled error for: $(echo "$@")"; : + [ $# -lt 1 ] || [ -n "$1" ] || err "Empty first arg: x_ $(echo "$@")" + [ $# -lt 1 ] || "$@" || err "Unhandled error for: $(echo "$@")"; : } -err_() +err() { - printf "ERROR %s: %s\n" "$0" "$1" 1>&2 + [ $# -lt 1 ] || printf "ERROR %s: %s\n" "$0" "$1" 1>&2 || : exit 1 } diff --git a/include/mrc.sh b/include/mrc.sh index eaf39dcb..775831f8 100644 --- a/include/mrc.sh +++ b/include/mrc.sh @@ -1,43 +1,32 @@ # SPDX-License-Identifier: GPL-2.0-only # Logic based on util/chromeos/crosfirmware.sh in coreboot cfc26ce278. -# Modifications in this version are Copyright 2021, 2023 and 2024 Leah Rowe. +# Modifications in this version are Copyright 2021,2023-2025 Leah Rowe. # Original copyright detailed in repo: https://review.coreboot.org/coreboot/ eval "`setvars "" MRC_url MRC_url_bkup MRC_hash MRC_board SHELLBALL`" -extract_mrc() -{ - extract_shellball - - "$cbfstool" "$appdir/"bios.bin extract -n mrc.bin \ - -f "$_dest" -r RO_SECTION || $err "extract_mrc: !$cbfstool $_dest" - - [ -n "$CONFIG_REFCODE_BLOB_FILE" ] && extract_refcode extra; : -} - extract_refcode() { - _refdest="${CONFIG_REFCODE_BLOB_FILE##*../}" - e "$_refdest" f && return 0 - - [ $# -lt 1 ] && extract_shellball + extract_mrc - # cbfstool changed the attributes scheme for stage files, - # incompatible with older versions before coreboot 4.14, - # so we need coreboot 4.13 cbfstool for certain refcode files + # cbfstool after coreboot 4.13 changed the stage file attribute scheme, + # and refcode is extracted from an image using the old scheme. we use + # cbfstool from coreboot 4.11_branch, the tree used by ASUS KGPE-D16 chkvars cbfstoolref - mkdir -p "${_refdest%/*}" || $err "ref: !mkdir -p ${_refdest%/*}" + x_ mkdir -p "${_pre_dest%/*}" x_ "$cbfstoolref" "$appdir/bios.bin" extract \ - -m x86 -n fallback/refcode -f "$_refdest" -r RO_SECTION + -m x86 -n fallback/refcode -f "$appdir/ref" -r RO_SECTION # enable the Intel GbE device, if told by offset MRC_refcode_gbe [ -z "$MRC_refcode_gbe" ] || x_ dd if="config/ifd/hp820g2/1.bin" \ - of="$_refdest" bs=1 seek=$MRC_refcode_gbe count=1 conv=notrunc; : + of="$appdir/ref" bs=1 seek=$MRC_refcode_gbe count=1 conv=notrunc; : + + x_ mv "$appdir/ref" "$_pre_dest" } -extract_shellball() +extract_mrc() { chkvars "MRC_board" "CONFIG_MRC_FILE" SHELLBALL="chromeos-firmwareupdate-$MRC_board" @@ -46,7 +35,10 @@ extract_shellball() x_ cd "$appdir" extract_partition "${MRC_url##*/}" extract_archive "$SHELLBALL" . - ) || $err "mrc download/extract failure"; : + ) || err "mrc download/extract failure" + + x_ "$cbfstool" "$appdir/"bios.bin extract -n mrc.bin \ + -f "${_pre_dest%/*}/mrc.bin" -r RO_SECTION } extract_partition() @@ -58,9 +50,9 @@ extract_partition() START=$(( $( echo $ROOTP | cut -f2 -d\ | tr -d "B" ) )) SIZE=$(( $( echo $ROOTP | cut -f4 -d\ | tr -d "B" ) )) - dd if="${1%.zip}" of="root-a.ext2" bs=1024 skip=$(( $START / 1024 )) \ - count=$(( $SIZE / 1024 )) || $err "ex dd ${1%.zip}, root-a.ext2" + x_ dd if="${1%.zip}" of="root-a.ext2" bs=1024 skip=$(( $START / 1024 )) \ + count=$(( $SIZE / 1024 )) printf "cd /usr/sbin\ndump chromeos-firmwareupdate %s\nquit" \ - "$SHELLBALL" | debugfs "root-a.ext2" || $err "!extract shellball" + "$SHELLBALL" | debugfs "root-a.ext2" || err "!extract shellball" } diff --git a/include/release.sh b/include/release.sh new file mode 100644 index 00000000..912687dc --- /dev/null +++ b/include/release.sh @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-3.0-or-later +# Copyright (c) 2023-2025 Leah Rowe <leah@libreboot.org> + +eval "`setvars "" reldir reldest vdir rsrc relmode`" + +release() +{ + export XBMK_RELEASE="y" + + reldir="release" + + while getopts d:m: option; do + [ -z "$OPTARG" ] && err "empty argument not allowed" + case "$option" in + d) reldir="$OPTARG" ;; + m) relmode="$OPTARG" ;; + *) err "invalid option '-$option'" ;; + esac + done + + reldest="$reldir/$version" + [ -e "$reldest" ] && \ + err "already exists: \"$reldest\"" + + vdir="$XBMK_CACHE/relpwd/${xbtmp##*/}/$version" + rsrc="$vdir/${relname}_src" + + remkdir "$vdir" + x_ git clone . "$rsrc" + update_xbmkver "$rsrc" + + prep_release src + prep_release tarball + [ "$relmode" = "src" ] || prep_release bin + x_ rm -Rf "$rsrc" + + x_ mkdir -p "$reldir" + x_ mv "$vdir" "$reldir" + x_ rm -Rf "${vdir%"/$version"}" + + printf "\n\nDONE! Check release files under %s\n" "$reldest" +} + +prep_release() +{ + x_ touch "$rsrc/lock" + ( + [ "$1" = "tarball" ] || x_ cd "$rsrc" + prep_release_$1 + ) || err "can't prep release $1" +} + +prep_release_src() +{ + x_ ./mk -f + fx_ "x_ rm -Rf" x_ find . -name ".git" + fx_ "x_ rm -Rf" x_ find . -name ".gitmodules" + ( fx_ nuke x_ find config -type f -name "nuke.list" ) || err; : +} + +nuke() +{ + r="$rsrc/src/${1#config/}" + [ -d "${r%/*}" ] && x_ cd "${r%/*}" && \ + dx_ "eval [ -L \"\$fx\" ] || x_ rm -Rf" "$rsrc/$1"; : +} + +prep_release_tarball() +{ + git log --graph --pretty=format:'%Cred%h%Creset %s %Creset' \ + --abbrev-commit > "$rsrc/CHANGELOG" || err "!log $rsrc" + x_ rm -f "$rsrc/lock" + x_ rm -Rf "$rsrc/cache" "$rsrc/tmp" + ( + x_ cd "${rsrc%/*}" + x_ mktarball "${rsrc##*/}" "${rsrc##*/}.tar.xz" + ) || err "can't create src tarball"; : +} + +prep_release_bin() +{ + x_ ./mk -d coreboot + fx_ "x_ ./mk -b" printf \ + "coreboot\npico-serprog\nstm32-vserprog\npcsx-redux\n" + + fx_ mkrom_tarball x_ find bin -maxdepth 1 -type d -name "serprog_*" + x_ mv bin ../roms +} diff --git a/include/rom.sh b/include/rom.sh index f74912af..c1b78c75 100644 --- a/include/rom.sh +++ b/include/rom.sh @@ -7,35 +7,27 @@ grubdata="config/data/grub" -mkserprog() +buildser() { - [ "$_f" = "-d" ] && return 0 # dry run - basename -as .h "$serdir/"*.h > "$xbmktmp/ser" || \ - $err "!mk $1 $xbmktmp" - - while read -r sertarget; do - [ "$1" = "pico" ] && x_ cmake -DPICO_BOARD="$sertarget" \ - -DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" \ - && x_ cmake --build "$sersrc/build" - [ "$1" = "stm32" ] && x_ make -C "$sersrc" \ - libopencm3-just-make BOARD=$sertarget && x_ make -C \ - "$sersrc" BOARD=$sertarget - x_ mkdir -p "bin/serprog_$1" - x_ mv "$serx" "bin/serprog_$1/serprog_$sertarget.${serx##*.}" - done < "$xbmktmp/ser" - - [ "$XBMK_RELEASE" = "y" ] && mkrom_tarball "bin/serprog_$1"; : + [ "$1" = "pico" ] && x_ cmake -DPICO_BOARD="$2" \ + -DPICO_SDK_PATH="$picosdk" -B "$sersrc/build" "$sersrc" && \ + x_ cmake --build "$sersrc/build" + [ "$1" = "stm32" ] && x_ make -C "$sersrc" libopencm3-just-make \ + BOARD=$2 && x_ make -C "$sersrc" BOARD=$2 + x_ mkdir -p "bin/serprog_$1" + x_ mv "$serx" "bin/serprog_$1/serprog_$2.${serx##*.}" } copyps1bios() { - x_ rm -Rf bin/playstation - x_ mkdir -p bin/playstation + [ "$dry" = ":" ] && return 0; : + + remkdir "bin/playstation" x_ cp src/pcsx-redux/src/mips/openbios/openbios.bin bin/playstation printf "MIT License\n\nCopyright (c) 2019-2024 PCSX-Redux authors\n\n" \ - > bin/playstation/COPYING.txt || $err "!pcsx-redux copyright" - cat config/snippet/mit >>bin/playstation/COPYING.txt || $err "!pcsx MIT" + > bin/playstation/COPYING.txt || err "!pcsx-redux copyright" + cat config/snippet/mit >>bin/playstation/COPYING.txt || err "!pcsx MIT" } mkpayload_grub() @@ -51,75 +43,61 @@ mkpayload_grub() "/boot/grub/grub.cfg=$grubdata/memdisk.cfg"; : } -mkvendorfiles() +corebootpremake() { - [ -z "$mode" ] && $dry cook_coreboot_config - check_coreboot_utils "$tree" + [ -n "$mode" ] || [ ! -f "$srcdir/.config" ] || $dry printf \ + "CONFIG_CCACHE=y\n" >> "$srcdir/.config" || err "$srcdir: !cook"; : + fx_ check_coreboot_util printf "cbfstool\nifdtool\n" printf "%s\n" "${version%%-*}" > "$srcdir/.coreboot-version" || \ - $err "!mk $srcdir .coreboot-version" + err "!mk $srcdir .coreboot-version" [ -z "$mode" ] && [ "$target" != "$tree" ] && \ x_ ./mk download "$target"; : } -cook_coreboot_config() -{ - [ -f "$srcdir/.config" ] || return 0 - printf "CONFIG_CCACHE=y\n" >> "$srcdir/.config" || \ - $err "$srcdir/.config: Could not enable ccache" - make -C "$srcdir" oldconfig || $err "Could not cook $srcdir/.config"; : -} - -check_coreboot_utils() +check_coreboot_util() { - for util in cbfstool ifdtool; do - [ "$badhash" = "y" ] && x_ rm -f "elf/$util/$1/$util" - e "elf/$util/$1/$util" f && continue - - utilelfdir="elf/$util/$1" - utilsrcdir="src/coreboot/$1/util/$util" - - utilmode="" && [ -n "$mode" ] && utilmode="clean" - x_ make -C "$utilsrcdir" $utilmode -j$XBMK_THREADS $makeargs - if [ -z "$mode" ] && [ ! -f "$utilelfdir/$util" ]; then - x_ mkdir -p "$utilelfdir" - x_ cp "$utilsrcdir/$util" "$utilelfdir" - [ "$util" = "cbfstool" ] || continue - x_ cp "$utilsrcdir/rmodtool" "$utilelfdir" - elif [ -n "$mode" ]; then - x_ rm -Rf "$utilelfdir" - fi; : - done; : + [ "$badhash" = "y" ] && x_ rm -f "elf/coreboot/$tree/$1" + e "elf/coreboot/$tree/$1" f && return 0 + + utilelfdir="elf/coreboot/$tree" + utilsrcdir="src/coreboot/$tree/util/$1" + + utilmode="" && [ -n "$mode" ] && utilmode="clean" + x_ make -C "$utilsrcdir" $utilmode -j$XBMK_THREADS $makeargs + [ -n "$mode" ] && x_ rm -Rf "$utilelfdir" && return 0 + [ -z "$mode" ] || return 0 + [ -f "$utilelfdir/$1" ] && return 0 + + x_ mkdir -p "$utilelfdir" + x_ cp "$utilsrcdir/$1" "$utilelfdir" + [ "$1" = "cbfstool" ] || return 0 + x_ cp "$utilsrcdir/rmodtool" "$utilelfdir" } mkcorebootbin() { [ "$target" = "$tree" ] && return 0 - tmprom="$xbmktmp/coreboot.rom" + tmprom="$xbtmp/coreboot.rom" $dry x_ cp "$srcdir/build/coreboot.rom" "$tmprom" initmode="${defconfig##*/}" displaymode="${initmode##*_}" [ "$displaymode" = "$initmode" ] && displaymode="" # "normal" config initmode="${initmode%%_*}" - cbfstool="elf/cbfstool/$tree/cbfstool" + cbfstool="elf/coreboot/$tree/cbfstool" - [ "$payload_uboot_i386" = "y" ] && \ - [ "$payload_uboot_amd64" = "y" ] && \ - $err "'$target' enables 32- and 64-bit x86 U-Boot" + [ -z "$payload_uboot" ] || [ "$payload_uboot" = "amd64" ] || \ + [ "$payload_uboot" = "i386" ] || [ "$payload_uboot" = "arm64" ] \ + || err "'$target' defines bad u-boot type '$payload_uboot'" - if [ "$payload_uboot_i386" = "y" ] || \ - [ "$payload_uboot_amd64" = "y" ]; then - printf "'%s' has x86 U-Boot; assuming SeaBIOS=y\n" \ - "$target" 1>&2 + [ -z "$payload_uboot" ] || [ "$payload_uboot" = "arm64" ] || \ payload_seabios="y" - fi [ -n "$uboot_config" ] || uboot_config="default" - [ "$payload_uboot" = "y" ] || payload_seabios="y" [ "$payload_grub" = "y" ] && payload_seabios="y" - [ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "y" ] && \ - $dry $err "$target: U-Boot(arm64) and SeaBIOS/GRUB both enabled." + [ "$payload_seabios" = "y" ] && [ "$payload_uboot" = "arm64" ] && \ + $dry err "$target: U-Boot(arm64) and SeaBIOS/GRUB both enabled." [ -z "$grub_scan_disk" ] && grub_scan_disk="nvme ahci ata" @@ -136,7 +114,8 @@ mkcorebootbin() if $dry grep "CONFIG_PAYLOAD_NONE=y" "$defconfig"; then [ "$payload_seabios" = "y" ] && pname="seabios" && \ $dry add_seabios - [ "$payload_uboot" = "y" ] && pname="uboot" && $dry add_uboot + [ "$payload_uboot" = "arm64" ] && pname="uboot" && \ + $dry add_uboot; : else pname="custom" $dry cprom @@ -145,10 +124,8 @@ mkcorebootbin() add_seabios() { - if [ "$payload_uboot_i386" = "y" ] || \ - [ "$payload_uboot_amd64" = "y" ]; then - $dry add_uboot - fi + [ -z "$payload_uboot" ] || [ "$payload_uboot" = "arm64" ] || \ + $dry add_uboot _seabioself="elf/seabios/default/$initmode/bios.bin.elf" _seaname="fallback/payload" && [ "$payload_grubsea" = "y" ] && \ @@ -169,7 +146,7 @@ add_seabios() [ "$payload_grub" = "y" ] && add_grub [ "$payload_grubsea" != "y" ] && cprom - [ "$payload_uboot_amd64" = "y" ] && [ "$displaymode" != "txtmode" ] && \ + [ "$payload_uboot" = "amd64" ] && [ "$displaymode" != "txtmode" ] && \ [ "$initmode" != "normal" ] && [ "$payload_grubsea" != "y" ] && \ pname="seauboot" && cprom "seauboot" [ "$payload_grub" = "y" ] && pname="seagrub" && mkseagrub; : @@ -181,8 +158,8 @@ add_grub() _grubname="fallback/payload" cbfs "$tmprom" "$grubelf" "$_grubname" printf "set grub_scan_disk=\"%s\"\n" "$grub_scan_disk" \ - > "$xbmktmp/tmpcfg" || $err "$target: !insert scandisk" - cbfs "$tmprom" "$xbmktmp/tmpcfg" scan.cfg raw + > "$xbtmp/tmpcfg" || err "$target: !insert scandisk" + cbfs "$tmprom" "$xbtmp/tmpcfg" scan.cfg raw [ "$initmode" != "normal" ] && [ "$displaymode" != "txtmode" ] && \ cbfs "$tmprom" "$grubdata/background/background1280x800.png" \ "background.png" raw; : @@ -193,9 +170,7 @@ mkseagrub() [ "$payload_grubsea" = "y" ] && pname="grub" [ "$payload_grubsea" = "y" ] || \ cbfs "$tmprom" "$grubdata/bootorder" bootorder raw - for keymap in config/data/grub/keymap/*.gkb; do - [ -f "$keymap" ] && cprom "${keymap##*/}"; : - done; : + fx_ cprom x_ find "$grubdata/keymap" -type f -name "*.gkb" } add_uboot() @@ -218,14 +193,13 @@ add_uboot() ubpath="fallback/payload" ubtarget="$target" # override for x86/x86_64 targets: - if [ "$payload_uboot_i386" = "y" ] || \ - [ "$payload_uboot_amd64" = "y" ]; then + if [ -n "$payload_uboot" ] && [ "$payload_uboot" != "arm64" ]; then ubcbfsargs="-l 0x1110000 -e 0x1110000" # 64-bit and 32-bit # on 64-bit, 0x1120000 is the SPL, and stub before that ubpath="img/u-boot" # 64-bit ubtarget="amd64coreboot" - [ "$payload_uboot_i386" = "y" ] && ubpath="u-boot" # 32-bit - [ "$payload_uboot_i386" = "y" ] && ubtarget="i386coreboot"; : + [ "$payload_uboot" = "i386" ] && ubpath="u-boot" # 32-bit + [ "$payload_uboot" = "i386" ] && ubtarget="i386coreboot"; : fi ubdir="elf/u-boot/$ubtarget/$uboot_config" @@ -234,8 +208,8 @@ add_uboot() ubootelf="$ubdir/u-boot.elf" && [ ! -f "$ubootelf" ] && \ ubootelf="$ubdir/u-boot" # override for x86/x86_64 targets: - [ "$payload_uboot_i386" = "y" ] && ubootelf="$ubdir/u-boot-dtb.bin" - [ "$payload_uboot_amd64" = "y" ] && \ + [ "$payload_uboot" = "i386" ] && ubootelf="$ubdir/u-boot-dtb.bin" + [ "$payload_uboot" = "amd64" ] && \ ubootelf="$ubdir/u-boot-x86-with-spl.bin" # EFI-compatible cbfs "$tmprom" "$ubootelf" "$ubpath" $ubcbfsargs @@ -244,16 +218,25 @@ add_uboot() cprom() { - newrom="bin/$target/${pname}_${target}_$initmode.rom" + cpcmd="cp" + + tmpnew=""; newrom="bin/$target/${pname}_${target}_$initmode.rom" [ -n "$displaymode" ] && newrom="${newrom%.rom}_$displaymode.rom" - [ $# -gt 0 ] && [ "$1" != "seauboot" ] && \ - newrom="${newrom%.rom}_${1%.gkb}.rom" + [ $# -gt 0 ] && [ "${1%.gkb}" != "$1" ] && tmpnew="${1##*/}" && \ + newrom="${newrom%.rom}_${tmpnew%.gkb}.rom" - x_ mkdir -p "bin/$target" - x_ cp "$tmprom" "$newrom" && [ $# -gt 0 ] && [ "$1" != "seauboot" ] && \ - cbfs "$newrom" "config/data/grub/keymap/$1" keymap.gkb raw + irom="$tmprom" + [ $# -lt 1 ] || irom="`mktemp`" || err "!mk irom, $(echo "$@")" + [ $# -gt 0 ] && x_ cp "$tmprom" "$irom" && cpcmd="mv" + + [ $# -gt 0 ] && [ "${1%.gkb}" != "$1" ] && \ + cbfs "$irom" "$grubdata/keymap/$tmpnew" keymap.gkb raw [ $# -gt 0 ] && [ "$1" = "seauboot" ] && \ - cbfs "$newrom" "config/data/grub/bootorder_uboot" bootorder raw; : + cbfs "$irom" "$grubdata/bootorder_uboot" bootorder raw; : + + printf "Creating new %s image: '%s'\n" "$projectname" "$newrom" + x_ mkdir -p "bin/$target" + x_ $cpcmd "$irom" "$newrom" } cbfs() @@ -270,10 +253,7 @@ cbfs() mkcoreboottar() { - [ "$target" = "$tree" ] && return 0 - [ "$XBMK_RELEASE" = "y" ] || return 0 - [ "$release" != "n" ] || return 0 - - $dry mkrom_tarball "bin/$target" - $dry x_ ./mk inject "bin/${relname}_${target}.tar.xz" nuke; : + [ "$target" != "$tree" ] && [ "$XBMK_RELEASE" = "y" ] && \ + [ "$release" != "n" ] && $dry mkrom_tarball "bin/$target" && \ + $dry x_ ./mk inject "bin/${relname}_${target}.tar.xz" nuke; : } diff --git a/include/tree.sh b/include/tree.sh new file mode 100644 index 00000000..85f97101 --- /dev/null +++ b/include/tree.sh @@ -0,0 +1,343 @@ +# SPDX-License-Identifier: GPL-3.0-or-later +# Copyright (c) 2022-2023 Alper Nebi Yasak <alpernebiyasak@gmail.com> +# Copyright (c) 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> +# Copyright (c) 2023-2025 Leah Rowe <leah@libreboot.org> + +eval "`setvars "" xarch srcdir premake gnatdir xlang mode makeargs elfdir cmd \ + project target target_dir targets xtree _f release bootstrapargs mkhelper \ + autoconfargs listfile autogenargs btype rev build_depend gccdir cmakedir \ + defconfig postmake mkhelpercfg dry dest_dir mdir cleanargs gccver gccfull \ + gnatver gnatfull do_make badhash tree`" + +trees() +{ + flags="f:b:m:u:c:x:s:l:n:d:" + + while getopts $flags option; do + [ -n "$_f" ] && err "only one flag is permitted" + _f="$1" + + case "$_f" in + -d) dry=":" ;; + -b) : ;; + -u) mode="oldconfig" ;; + -m) mode="menuconfig" ;; + -c) mode="distclean" ;; + -x) mode="crossgcc-clean" ;; + -f) + do_make="n" + dry=":" ;; + -s) mode="savedefconfig" ;; + -l) mode="olddefconfig" ;; + -n) mode="nconfig" ;; + *) err "invalid option '-$option'" ;; + esac + + if [ -z "${OPTARG+x}" ]; then + shift 1 + break + fi + + project="${OPTARG#src/}" + project="${project#config/git/}" + shift 2 + done + [ -z "$_f" ] && err "missing flag ($flags)" + [ -z "$project" ] && fx_ "x_ ./mk $_f" x_ ls -1 config/git && return 1 + + [ -f "config/git/$project/pkg.cfg" ] || \ + err "config/git/$project/pkg.cfg missing" + + for d in "elf" "config/data" "config" "src"; do + eval "${d#*/}dir=\"$d/$project\"" + done + dest_dir="$elfdir" + + listfile="$datadir/build.list" + [ -f "$listfile" ] || listfile="" # optional on all projects + + mkhelpercfg="$datadir/mkhelper.cfg" + if e "$mkhelpercfg" f missing; then + mkhelpercfg="$xbtmp/mkhelper.cfg" + x_ touch "$mkhelpercfg" + fi + + targets="$*" + cmd="build_targets $targets" + singletree "$project" && cmd="build_project" + + remkdir "${tmpgit%/*}" +} + +build_project() +{ + configure_project "$configdir" || return 0 + [ ! -f "$listfile" ] || $dry elfcheck || return 0 + + [ "$mode" = "distclean" ] && mode="clean" + run_make_command || return 0 + + [ -n "$mode" ] || $dry copy_elf; : +} + +build_targets() +{ + [ -d "$configdir" ] || err "directory, $configdir, does not exist" + [ $# -gt 0 ] || targets="$(ls -1 "$configdir")" || err "!o $configdir" + + for x in $targets; do + unset CROSS_COMPILE + export PATH="$xbmkpath" + [ "$x" = "list" ] && x_ ls -1 "config/$project" && \ + listfile="" && break + + target="$x" + printf "'make %s', '%s', '%s'\n" "$mode" "$project" "$target" + x_ handle_defconfig + + [ -n "$mode" ] || x_ $postmake + done; : +} + +handle_defconfig() +{ + target_dir="$configdir/$target" + + [ -f "CHANGELOG" ] || fetch_project "$project" + configure_project "$target_dir" || return 0 + + chkvars tree + srcdir="src/$project/$tree" + + [ "$mode" = "${mode%clean}" ] && [ ! -d "$srcdir" ] && return 0 + + [ -z "$mode" ] && for _xarch in $xarch; do + $dry check_cross_compiler "$_xarch" + done; : + + for y in "$target_dir/config"/*; do + [ "$_f" = "-d" ] || [ -f "$y" ] || continue + [ "$_f" = "-d" ] || defconfig="$y" + + [ -n "$mode" ] || check_defconfig || continue + handle_makefile + [ -n "$mode" ] || $dry copy_elf + done; : +} + +configure_project() +{ + eval "`setvars "" cleanargs build_depend autoconfargs xtree postmake \ + makeargs btype mkhelper bootstrapargs premake release xlang xarch \ + badhash`" + _tcfg="$1/target.cfg" + [ -f "$_tcfg" ] || btype="auto" + e "$datadir/mkhelper.cfg" f && eval "`setcfg "$datadir/mkhelper.cfg"`" + + while e "$_tcfg" f || [ "$cmd" != "build_project" ]; do + eval "`setvars "" rev tree`" + eval "`setcfg "$_tcfg"`" + printf "Loading %s config: %s\n" "$project" "$_tcfg" + + [ "$_f" = "-d" ] && build_depend="" # dry run + [ "$cmd" = "build_project" ] && break + [ "$do_make" != "n" ] && break + + [ "${_tcfg%/*/target.cfg}" = "${_tcfg%"/$tree/target.cfg"}" ] \ + && break + _tcfg="${_tcfg%/*/target.cfg}/$tree/target.cfg" + done + [ "$XBMK_RELEASE" = "y" ] && [ "$release" = "n" ] && return 1 + [ -z "$btype" ] || [ "${mode%config}" = "$mode" ] || return 1 + [ -z "$mode" ] && $dry build_dependencies + + mdir="$xbmkpwd/config/submodule/$project" + [ -n "$tree" ] && mdir="$mdir/$tree" + [ -f "CHANGELOG" ] || check_project_hashes + + if [ "$do_make" = "n" ]; then + [ -f "CHANGELOG" ] || fetch_${cmd#build_} + return 1 + fi + x_ ./mk -f "$project" "$target" +} + +build_dependencies() +{ + for bd in $build_depend; do + bd_p="${bd%%/*}" + bd_t="${bd##*/}" + [ -z "$bd_p" ] && $dry err "$project/$tree: !bd '$bd'" + [ "${bd##*/}" = "$bd" ] && bd_t="" + [ -z "$bd_p" ] || $dry x_ ./mk -b $bd_p $bd_t; : + done; : +} + +check_project_hashes() +{ + old_pjhash="" && x_ mkdir -p "$XBMK_CACHE/hash" + [ ! -f "$XBMK_CACHE/hash/$project$tree" ] || \ + read -r old_pjhash < "$XBMK_CACHE/hash/$project$tree" || \ + err "old_pjhash: Can't read '$XBMK_CACHE/hash/$project$tree'" + + fx_ "x_ sha512sum" find "$datadir" "$configdir/$tree" "$mdir" \ + -type f -not -path "*/.git*/*" | awk '{print $1}' > \ + "$xbtmp/project.hash" || err "!h $project $tree" + + pjhash="$(x_ sha512sum "$xbtmp/project.hash" | awk '{print $1}' || \ + err)" || err "pjhash: Can't read sha512 of '$xbtmp/project.hash'" + [ "$pjhash" != "$old_pjhash" ] && badhash="y" + [ -f "$XBMK_CACHE/hash/$project$tree" ] || badhash="y" + + printf "%s\n" "$pjhash" > "$XBMK_CACHE/hash/$project$tree" || \ + err "!mk $XBMK_CACHE/hash/$project$tree" + + [ "$badhash" != "y" ] || x_ rm -Rf "src/$project/$tree" \ + "elf/$project/$tree" "elf/$project/$target"; : +} + +check_cross_compiler() +{ + cbdir="src/coreboot/$tree" + [ "$project" != "coreboot" ] && cbdir="src/coreboot/default" + [ -n "$xtree" ] && cbdir="src/coreboot/$xtree" + + x_ ./mk -f coreboot "${cbdir#src/coreboot/}" + + export PATH="$xbmkpwd/$cbdir/util/crossgcc/xgcc/bin:$PATH" + export CROSS_COMPILE="${xarch% *}-" + [ -n "$xlang" ] && export BUILD_LANGUAGES="$xlang" + + # match gnat-X to gcc + check_gnu_path gcc gnat || x_ check_gnu_path gnat gcc + + xfix="${1%-*}" && [ "$xfix" = "x86_64" ] && xfix="x64" + xgccargs="crossgcc-$xfix UPDATED_SUBMODULES=1 CPUS=$XBMK_THREADS" + make -C "$cbdir" $xgccargs || x_ make -C "$cbdir" $xgccargs + + # we only want to mess with hostcc to build xgcc + remkdir "$XBMK_CACHE/gnupath" +} + +# fix mismatching gcc/gnat versions on debian trixie/sid. as of december 2024, +# trixie/sid had gnat-13 as gnat and gcc-14 as gcc, but has gnat-14 in apt. in +# some cases, gcc 13+14 and gnat-13 are present; or gnat-14 and gcc-14, but +# gnat in PATH never resolves to gnat-14, because gnat-14 was "experimental" +check_gnu_path() +{ + command -v "$1" 1>/dev/null || err "Host '$1' unavailable" + + eval "`setvars "" gccver gccfull gnatver gnatfull gccdir gnatdir`" + x_ gnu_setver "$1" "$1" || err "Command '$1' unavailable." + gnu_setver "$2" "$2" || : + + eval "[ -z \"\$$1ver\" ] && err \"Cannot detect host '$1' version\"" + [ "$gnatfull" = "$gccfull" ] && return 0 + + eval "$1dir=\"$(dirname "$(command -v "$1")")\"" + eval "_gnudir=\"\$$1dir\"; _gnuver=\"\$$1ver\"" + for _bin in "$_gnudir/$2-"*; do + [ "${_bin#"$_gnudir/$2-"}" = "$_gnuver" ] && [ -x "$_bin" ] \ + && _gnuver="${_bin#"$_gnudir/$2-"}" && break; : + done + gnu_setver "$2" "$_gnudir/$2-$_gnuver" || return 1 + [ "$gnatfull" = "$gccfull" ] || return 1 + + ( + remkdir "$XBMK_CACHE/gnupath" && x_ cd "$XBMK_CACHE/gnupath" + for _gnubin in "$_gnudir/$2"*"-$_gnuver"; do + _gnuutil="${_gnubin##*/}" && [ -e "$_gnubin" ] && \ + x_ ln -s "$_gnubin" "${_gnuutil%"-$_gnuver"}" + done + ) || err "Cannot create $2-$_gnuver link in $_gnudir"; : +} + +gnu_setver() +{ + eval "$2 --version 1>/dev/null 2>/dev/null || return 1" + eval "$1ver=\"`"$2" --version 2>/dev/null | head -n1`\"" + eval "$1ver=\"\${$1ver##* }\"" + eval "$1full=\"\$$1ver\"" + eval "$1ver=\"\${$1ver%%.*}\""; : +} + +check_defconfig() +{ + [ -f "$defconfig" ] || $dry err "$project/$target: missing defconfig" + dest_dir="$elfdir/$target/${defconfig#"$target_dir/config/"}" + + $dry elfcheck || return 1; : # skip build if a previous one exists +} + +elfcheck() +{ + # TODO: *STILL* very hacky check. do it properly (based on build.list) + ( fx_ "eval exit 1 && err" find "$dest_dir" -type f ) || return 1; : +} + +handle_makefile() +{ + $dry check_makefile "$srcdir" && \ + $dry x_ make -C "$srcdir" $cleanargs clean + + [ -f "$defconfig" ] && x_ cp "$defconfig" "$srcdir/.config" + + run_make_command || err "handle_makefile $srcdir: no makefile!" + + _copy=".config" && [ "$mode" = "savedefconfig" ] && _copy="defconfig" + [ "${mode%config}" = "$mode" ] || \ + $dry x_ cp "$srcdir/$_copy" "$defconfig" + + [ -e "$srcdir/.git" ] && [ "$project" = "u-boot" ] && \ + [ "$mode" = "distclean" ] && \ + $dry x_ git -C "$srcdir" $cleanargs clean -fdx; : +} + +run_make_command() +{ + [ -n "$mode" ] || x_ $premake + + $dry check_cmake "$srcdir" && [ -z "$mode" ] && \ + $dry check_autoconf "$srcdir" + $dry check_makefile "$srcdir" || return 1 + + $dry x_ make -C "$srcdir" $mode -j$XBMK_THREADS $makeargs + [ -n "$mode" ] || x_ $mkhelper + + check_makefile "$srcdir" || return 0 + [ "$mode" != "clean" ] || \ + $dry make -C "$srcdir" $cleanargs distclean || \ + $dry x_ make -C "$srcdir" $cleanargs clean; : +} + +check_cmake() +{ + [ -z "$cmakedir" ] || $dry check_makefile "$1" || cmake -B "$1" \ + "$1/$cmakedir" || $dry x_ check_makefile "$1" + [ -z "$cmakedir" ] || $dry x_ check_makefile "$1"; : +} + +check_autoconf() +{ + ( + x_ cd "$1" + [ -f "bootstrap" ] && x_ ./bootstrap $bootstrapargs + [ -f "autogen.sh" ] && x_ ./autogen.sh $autogenargs + [ -f "configure" ] && x_ ./configure $autoconfargs; : + ) || err "can't bootstrap project: $1"; : +} + +check_makefile() +{ + [ -f "$1/Makefile" ] || [ -f "$1/makefile" ] || \ + [ -f "$1/GNUmakefile" ] || return 1; : +} + +copy_elf() +{ + [ -f "$listfile" ] && x_ mkdir -p "$dest_dir" + [ ! -f "$listfile" ] || while read -r f; do + [ -f "$srcdir/$f" ] && x_ cp "$srcdir/$f" "$dest_dir"; : + done < "$listfile" || err "copy_elf $*: cannot read '$listfile'"; : + x_ make clean -C "$srcdir" $cleanargs +} diff --git a/include/vendor.sh b/include/vendor.sh new file mode 100644 index 00000000..55373913 --- /dev/null +++ b/include/vendor.sh @@ -0,0 +1,402 @@ +# SPDX-License-Identifier: GPL-3.0-only +# Copyright (c) 2022 Caleb La Grange <thonkpeasant@protonmail.com> +# Copyright (c) 2022 Ferass El Hafidi <vitali64pmemail@protonmail.com> +# Copyright (c) 2023-2025 Leah Rowe <leah@libreboot.org> + +# These are variables and functions, extending the functionality of +# inject.sh, to be used with lbmk; they are kept separate here, so that +# the main inject.sh can be as similar as possible between lbmk and cbmk, +# so that cherry-picking lbmk patches into cbmk yields fewer merge conflicts. + +# When reading this file, you should imagine that it is part of inject.sh, +# with inject.sh concatenated onto vendor.sh; they are inexorably intertwined. +# The main "mk" script sources vendor.sh first, and then inject.sh, in lbmk. + +e6400_unpack="$xbmkpwd/src/bios_extract/dell_inspiron_1100_unpacker.py" +me7updateparser="$xbmkpwd/util/me7_update_parser/me7_update_parser.py" +pfs_extract="$xbmkpwd/src/biosutilities/Dell_PFS_Extract.py" +uefiextract="$xbmkpwd/elf/uefitool/uefiextract" +vendir="vendorfiles" +appdir="$vendir/app" +vfix="DO_NOT_FLASH_YET._FIRST,_INJECT_FILES_VIA_INSTRUCTIONS_ON_LIBREBOOT.ORG_" + +# lbmk-specific extension to the "cv" variable (not suitable for cbmk) +cvchk="CONFIG_INCLUDE_SMSC_SCH5545_EC_FW CONFIG_HAVE_MRC CONFIG_HAVE_ME_BIN \ + CONFIG_LENOVO_TBFW_BIN CONFIG_VGA_BIOS_FILE CONFIG_FSP_M_FILE \ + CONFIG_FSP_S_FILE CONFIG_KBC1126_FW1 CONFIG_KBC1126_FW2" + +# lbmk-specific extensions to the "cv" variable (not suitable for cbmk) +cvxbmk="CONFIG_ME_BIN_PATH CONFIG_SMSC_SCH5545_EC_FW_FILE CONFIG_FSP_FULL_FD \ + CONFIG_KBC1126_FW1_OFFSET CONFIG_KBC1126_FW2_OFFSET CONFIG_FSP_USE_REPO \ + CONFIG_VGA_BIOS_ID CONFIG_BOARD_DELL_E6400 CONFIG_FSP_S_CBFS \ + CONFIG_HAVE_REFCODE_BLOB CONFIG_REFCODE_BLOB_FILE CONFIG_FSP_FD_PATH \ + CONFIG_IFD_BIN_PATH CONFIG_MRC_FILE CONFIG_FSP_M_CBFS" + +# lbmk-specific extensions; mostly used for downloading vendor files +eval "`setvars "" has_hashes EC_hash DL_hash DL_url_bkup MRC_refcode_gbe vcfg \ + E6400_VGA_DL_hash E6400_VGA_DL_url E6400_VGA_DL_url_bkup E6400_VGA_offset \ + E6400_VGA_romname SCH5545EC_DL_url_bkup SCH5545EC_DL_hash _dest mecleaner \ + kbc1126_ec_dump MRC_refcode_cbtree _dl SCH5545EC_DL_url EC_url rom DL_url \ + nuke cbfstoolref FSPFD_hash _7ztest ME11bootguard ME11delta xromsize \ + ME11version ME11sku ME11pch _me _metmp mfs TBFW_url_bkup TBFW_url cbdir \ + TBFW_hash TBFW_size hashfile EC_url_bkup FSPM_bin_hash FSPS_bin_hash \ + EC_FW1_hash EC_FW2_hash ME_bin_hash MRC_bin_hash REF_bin_hash _dl_bin \ + SCH5545EC_bin_hash TBFW_bin_hash E6400_VGA_bin_hash _pre_dest`" + +download() +{ + [ $# -gt 0 ] || err "No argument given" + export PATH="$PATH:/sbin" + board="$1" && check_target && readkconfig download +} + +getfiles() +{ + [ -z "$CONFIG_HAVE_ME_BIN" ] || fetch intel_me "$DL_url" \ + "$DL_url_bkup" "$DL_hash" "$CONFIG_ME_BIN_PATH" curl "$ME_bin_hash" + [ -z "$CONFIG_INCLUDE_SMSC_SCH5545_EC_FW" ] || fetch sch5545ec \ + "$SCH5545EC_DL_url" "$SCH5545EC_DL_url_bkup" "$SCH5545EC_DL_hash" \ + "$CONFIG_SMSC_SCH5545_EC_FW_FILE" "curl" "$SCH5545EC_bin_hash" + [ -z "$CONFIG_KBC1126_FW1" ] || fetch kbc1126ec "$EC_url" \ + "$EC_url_bkup" "$EC_hash" "$CONFIG_KBC1126_FW1" curl "$EC_FW1_hash" + [ -z "$CONFIG_KBC1126_FW2" ] || fetch kbc1126ec "$EC_url" \ + "$EC_url_bkup" "$EC_hash" "$CONFIG_KBC1126_FW2" curl "$EC_FW2_hash" + [ -z "$CONFIG_VGA_BIOS_FILE" ] || fetch e6400vga "$E6400_VGA_DL_url" \ + "$E6400_VGA_DL_url_bkup" "$E6400_VGA_DL_hash" \ + "$CONFIG_VGA_BIOS_FILE" "curl" "$E6400_VGA_bin_hash" + [ -z "$CONFIG_HAVE_MRC" ] || fetch "mrc" "$MRC_url" "$MRC_url_bkup" \ + "$MRC_hash" "$CONFIG_MRC_FILE" "curl" "$MRC_bin_hash" + [ -z "$CONFIG_REFCODE_BLOB_FILE" ] || fetch "refcode" "$MRC_url" \ + "$MRC_url_bkup" "$MRC_hash" "$CONFIG_REFCODE_BLOB_FILE" "curl" \ + "$REF_bin_hash" + [ -z "$CONFIG_LENOVO_TBFW_BIN" ] || fetch "tbfw" "$TBFW_url" \ + "$TBFW_url_bkup" "$TBFW_hash" "$CONFIG_LENOVO_TBFW_BIN" "curl" \ + "$TBFW_bin_hash" + [ -z "$CONFIG_FSP_M_FILE" ] || fetch "fsp" "$CONFIG_FSP_FD_PATH" \ + "$CONFIG_FSP_FD_PATH" "$FSPFD_hash" "$CONFIG_FSP_M_FILE" "copy" \ + "$FSPM_bin_hash" + [ -z "$CONFIG_FSP_S_FILE" ] || fetch "fsp" "$CONFIG_FSP_FD_PATH" \ + "$CONFIG_FSP_FD_PATH" "$FSPFD_hash" "$CONFIG_FSP_S_FILE" "copy" \ + "$FSPS_bin_hash"; : +} + +fetch() +{ + dl_type="$1" + dl="$2" + dl_bkup="$3" + dlsum="$4" + _dest="${5##*../}" + _pre_dest="$XBMK_CACHE/tmpdl/check" || err "!fetch, mktemp, $*" + dlop="$6" + binsum="$7" + + [ "$5" = "/dev/null" ] && return 0 + _dl="$XBMK_CACHE/file/$dlsum" # internet file to extract from e.g. .exe + _dl_bin="$XBMK_CACHE/file/$binsum" # extracted file e.g. me.bin + + # an extracted vendor file will be placed in pre_dest first, for + # verifying its checksum. if it matches, it is later moved to _dest + remkdir "${_pre_dest%/*}" "$appdir" + + # HACK: if grabbing fsp from coreboot, fix the path for lbmk + [ "$dl_type" = "fsp" ] && for _cdl in dl dl_bkup; do + eval "$_cdl=\"\${$_cdl##*../}\"; _cdp=\"\$$_cdl\"" + [ -f "$_cdp" ] || _cdp="$cbdir/$_cdp" + [ -f "$_cdp" ] && eval "$_cdl=\"$_cdp\""; : + done; : + + # download the file (from the internet) to extract from + xbget "$dlop" "$dl" "$dl_bkup" "$_dl" "$dlsum" + x_ rm -Rf "${_dl}_extracted" + + # skip extraction if a cached extracted file exists + ( xbget copy "$_dl_bin" "$_dl_bin" "$_dest" "$binsum" 2>/dev/null ) || : + [ -f "$_dest" ] && return 0 + + x_ mkdir -p "${_dest%/*}" + [ "$dl_type" = "fsp" ] || extract_archive "$_dl" "$appdir" || \ + [ "$dl_type" = "e6400vga" ] || err "$_dest $dl_type: !extract" + + x_ extract_$dl_type "$_dl" "$appdir" + set -u -e + + # some functions don't output directly to the given file, _pre_dest. + # instead, they put multiple files there, but we need the one matching + # the given hashsum. So, search for a matching file via bruteforce: + ( fx_ "eval mkdst \"$binsum\"" x_ find "${_pre_dest%/*}" -type f ) || : + + bad_checksum "$binsum" "$_dest" || [ ! -f "$_dest" ] || return 0 + [ -z "$binsum" ] && printf "'%s': checksum undefined\n" "$_dest" 1>&2 + [ -L "$_dest" ] && printf "WARNING: '%s' is a link!\n" "$_dest" 1>&2 + [ -L "$_dest" ] || x_ rm -f "$_dest" + err "Could not safely extract '$_dest', for board '$board'" +} + +mkdst() +{ + bad_checksum "$1" "$2" && x_ rm -f "$2" && return 0 + x_ mv "$2" "$_dl_bin" + x_ cp "$_dl_bin" "$_dest" + exit 1 +} + +extract_intel_me() +{ + e "$mecleaner" f not && err "$cbdir: me_cleaner missing" + + _7ztest="$xbloc/metmp/a" + _metmp="$xbloc/me.bin" + x_ rm -f "$_metmp" "$xbloc/a" + + mfs="" && [ "$ME11bootguard" = "y" ] && mfs="--whitelist MFS" && \ + chkvars ME11delta ME11version ME11sku ME11pch + [ "$ME11bootguard" = "y" ] && x_ ./mk -f deguard + + set +u +e + x_ rm -Rf "$xbmkpwd/metmp" + ( fx_ find_me x_ find "$xbmkpwd/$appdir" -type f ) || : + [ "$ME11bootguard" != "y" ] && x_ mv "$_metmp" "$_pre_dest" && return 0 + + ( + x_ cd src/deguard/ + x_ ./finalimage.py --delta "data/delta/$ME11delta" --version \ + "$ME11version" --pch "$ME11pch" --sku "$ME11sku" \ + --fake-fpfs data/fpfs/zero --input "$_metmp" --output "$_pre_dest" + ) || err "Error running deguard for $_dest"; : +} + +find_me() +{ + [ -f "$_metmp" ] && exit 1 + [ -L "$1" ] && return 0 + + _7ztest="${_7ztest}a" && _r="-r" && [ -n "$mfs" ] && _r="" + + "$mecleaner" $mfs $_r -t -O "$xbloc/a" -M "$_metmp" "$1" || \ + "$mecleaner" $mfs $_r -t -O "$_metmp" "$1" || "$me7updateparser" \ + -O "$_metmp" "$1" || extract_archive "$1" "$_7ztest" || return 0 + + [ -f "$_metmp" ] && exit 1 + ( fx_ find_me x_ find "$_7ztest" -type f ) || exit 1; : +} + +extract_archive() +{ + innoextract "$1" -d "$2" || python "$pfs_extract" "$1" -e || 7z x \ + "$1" -o"$2" || unar "$1" -o "$2" || unzip "$1" -d "$2" || return 1 + + [ ! -d "${_dl}_extracted" ] || x_ cp -R "${_dl}_extracted" "$2"; : +} + +extract_kbc1126ec() +{ + ( + x_ cd "$appdir/" + mv Rompaq/68*.BIN ec.bin || unar -D ROM.CAB Rom.bin || unar -D \ + Rom.CAB Rom.bin || unar -D 68*.CAB Rom.bin || err "!kbc1126 unar" + [ -f "ec.bin" ] || x_ mv Rom.bin ec.bin + x_ e ec.bin f && x_ "$kbc1126_ec_dump" ec.bin + ) || err "$board: can't extract kbc1126 ec firmware" + + x_ e "$appdir/ec.bin.fw1" f && x_ e "$appdir/ec.bin.fw2" f + x_ cp "$appdir/"ec.bin.fw* "${_pre_dest%/*}/" +} + +extract_e6400vga() +{ + set +u +e + chkvars E6400_VGA_offset E6400_VGA_romname + tail -c +$E6400_VGA_offset "$_dl" | gunzip > "$appdir/bios.bin" || : + ( + x_ cd "$appdir" + x_ e "bios.bin" f + "$e6400_unpack" bios.bin || printf "TODO: fix dell extract util\n" + ) || err "can't extract e6400 vga rom" + x_ cp "$appdir/$E6400_VGA_romname" "$_pre_dest" +} + +extract_sch5545ec() +{ + # full system ROM (UEFI), to extract with UEFIExtract: + _bios="${_dl}_extracted/Firmware/1 $dlsum -- 1 System BIOS vA.28.bin" + # this is the SCH5545 firmware, inside of the extracted UEFI ROM: + _sch5545ec_fw="$_bios.dump/4 7A9354D9-0468-444A-81CE-0BF617D890DF" + _sch5545ec_fw="$_sch5545ec_fw/54 D386BEB8-4B54-4E69-94F5-06091F67E0D3" + _sch5545ec_fw="$_sch5545ec_fw/0 Raw section/body.bin" # <-- this! + + x_ "$uefiextract" "$_bios" + x_ cp "$_sch5545ec_fw" "$_pre_dest" +} + +# Lenovo ThunderBolt firmware updates: +# https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t480-type-20l5-20l6/20l5/solutions/ht508988 +extract_tbfw() +{ + chkvars TBFW_size + fx_ copytb x_ find "$appdir" -type f -name "TBT.bin" +} + +copytb() +{ + [ -f "$1" ] && [ ! -L "$1" ] && x_ dd if=/dev/null of="$1" bs=1 \ + seek=$TBFW_size && x_ mv "$1" "$_pre_dest" && return 1; : +} + +extract_fsp() +{ + x_ python "$cbdir/3rdparty/fsp/Tools/SplitFspBin.py" split -f "$1" \ + -o "${_pre_dest%/*}" -n "Fsp.fd" +} + +setvfile() +{ + [ -n "$vcfg" ] && for c in $cvchk; do + vcmd="[ \"\${$c}\" != \"/dev/null\" ] && [ -n \"\${$c}\" ]" + eval "$vcmd && getvfile \"\$@\" && return 0" + done && return 1; : +} + +getvfile() +{ + eval "`setcfg "config/vendor/$vcfg/pkg.cfg" 1`" + bootstrap && [ $# -gt 0 ] && getfiles && return 0 # download + fx_ prep x_ find "$tmpromdir" -maxdepth 1 -type f -name "*.rom" + ( check_vendor_hashes ) || err "$archive: Can't verify hashes"; : +} + +bootstrap() +{ + cbdir="src/coreboot/$tree" + mecleaner="$xbmkpwd/$cbdir/util/me_cleaner/me_cleaner.py" + kbc1126_ec_dump="$xbmkpwd/$cbdir/util/kbc1126/kbc1126_ec_dump" + cbfstool="elf/coreboot/$tree/cbfstool" + rmodtool="elf/coreboot/$tree/rmodtool" + + x_ ./mk -f coreboot "${cbdir##*/}" + fx_ "x_ ./mk -b" printf "uefitool\nbiosutilities\nbios_extract\n" + [ -d "${kbc1126_ec_dump%/*}" ] && x_ make -C "$cbdir/util/kbc1126" + [ -n "$MRC_refcode_cbtree" ] && \ + cbfstoolref="elf/coreboot/$MRC_refcode_cbtree/cbfstool" && \ + x_ ./mk -d coreboot "$MRC_refcode_cbtree"; : +} + +prep() +{ + _xrom="$1" + _xromname="${1##*/}" + _xromnew="${_xrom%/*}/${_xromname#"$vfix"}" + [ "$nuke" = "nuke" ] && _xromnew="${_xrom%/*}/$vfix${_xrom##*/}" + + e "$_xrom" f missing && return 0 + [ -z "${_xromname#"$vfix"}" ] && err "$_xromname / $vfix: name match" + + # Remove the prefix and 1-byte pad + if [ "$nuke" != "nuke" ] && \ + [ "${_xromname#"$vfix"}" != "$_xromname" ]; then + xromsize="$(expr $(stat -c '%s' "$_xrom") - 1)" || err "!int" + [ $xromsize -lt 524288 ] && err "too small, $xromsize: $_xrom" + + x_ dd if="$_xrom" of="$_xromnew" bs=$xromsize count=1 + x_ rm -f "$_xrom" + + _xrom="$_xromnew" + fi + + [ "$nuke" != "nuke" ] || ( mksha512 "$_xrom" "vendorhashes" ) || err + + add_vfiles "$_xrom" || return 1 # if break return, can still change MAC + [ "$nuke" != "nuke" ] && return 0 + + # Rename the file, prefixing a warning saying not to flash + cat "$_xrom" config/data/coreboot/0 > "$_xromnew" || err "!pad $_xrom" + x_ rm -f "$_xrom" +} + +mksha512() +{ + [ "${1%/*}" != "$1" ] && x_ cd "${1%/*}" + sha512sum ./"${1##*/}" >> "$2" || err "!sha512sum \"$1\" > \"$2\"" +} + +add_vfiles() +{ + rom="$1" + + if [ "$has_hashes" != "y" ] && [ "$nuke" != "nuke" ]; then + printf "'%s' has no hash file. Skipping.\n" "$archive" 1>&2 + return 1 + elif [ "$has_hashes" = "y" ] && [ "$nuke" = "nuke" ]; then + printf "'%s' has a hash file. Skipping nuke.\n" "$archive" 1>&2 + return 1 + fi + + [ -n "$CONFIG_HAVE_REFCODE_BLOB" ] && vfile "fallback/refcode" \ + "$CONFIG_REFCODE_BLOB_FILE" "stage" + [ "$CONFIG_HAVE_MRC" = "y" ] && vfile "mrc.bin" "$CONFIG_MRC_FILE" \ + "mrc" "0xfffa0000" + [ "$CONFIG_HAVE_ME_BIN" = "y" ] && vfile IFD "$CONFIG_ME_BIN_PATH" me + [ -n "$CONFIG_KBC1126_FW1" ] && vfile ecfw1.bin \ + "$CONFIG_KBC1126_FW1" raw "$CONFIG_KBC1126_FW1_OFFSET" + [ -n "$CONFIG_KBC1126_FW2" ] && vfile ecfw2.bin \ + "$CONFIG_KBC1126_FW2" raw "$CONFIG_KBC1126_FW2_OFFSET" + [ -n "$CONFIG_VGA_BIOS_FILE" ] && [ -n "$CONFIG_VGA_BIOS_ID" ] && \ + vfile "pci$CONFIG_VGA_BIOS_ID.rom" "$CONFIG_VGA_BIOS_FILE" optionrom + [ "$CONFIG_INCLUDE_SMSC_SCH5545_EC_FW" = "y" ] && \ + [ -n "$CONFIG_SMSC_SCH5545_EC_FW_FILE" ] && \ + vfile sch5545_ecfw.bin "$CONFIG_SMSC_SCH5545_EC_FW_FILE" raw + [ -z "$CONFIG_FSP_USE_REPO" ] && [ -z "$CONFIG_FSP_FULL_FD" ] && \ + [ -n "$CONFIG_FSP_M_FILE" ] && \ + vfile "$CONFIG_FSP_M_CBFS" "$CONFIG_FSP_M_FILE" fsp --xip + [ -z "$CONFIG_FSP_USE_REPO" ] && [ -z "$CONFIG_FSP_FULL_FD" ] && \ + [ -n "$CONFIG_FSP_S_FILE" ] && \ + vfile "$CONFIG_FSP_S_CBFS" "$CONFIG_FSP_S_FILE" fsp + + printf "ROM image successfully patched: %s\n" "$rom" + xchanged="y" +} + +vfile() +{ + [ "$2" = "/dev/null" ] && return 0 + + cbfsname="$1" + _dest="${2##*../}" + _t="$3" + + _offset="" + + if [ "$_t" = "fsp" ] && [ $# -gt 3 ]; then + _offset="$4" + elif [ $# -gt 3 ] && _offset="-b $4" && [ -z "$4" ]; then + err "vfile $*, $rom: offset given but empty (undefined)" + fi + + [ "$nuke" = "nuke" ] || x_ e "$_dest" f + + if [ "$cbfsname" = "IFD" ]; then + [ "$nuke" = "nuke" ] || x_ "$ifdtool" $ifdprefix -i \ + $_t:$_dest "$rom" -O "$rom" + [ "$nuke" != "nuke" ] || x_ "$ifdtool" $ifdprefix --nuke \ + $_t "$rom" -O "$rom" + elif [ "$nuke" = "nuke" ]; then + x_ "$cbfstool" "$rom" remove -n "$cbfsname" + elif [ "$_t" = "stage" ]; then # the only stage we handle is refcode + x_ rm -f "$xbloc/refcode" + x_ "$rmodtool" -i "$_dest" -o "$xbloc/refcode" + x_ "$cbfstool" "$rom" add-stage -f "$xbloc/refcode" \ + -n "$cbfsname" -t stage + else + x_ "$cbfstool" "$rom" add -f "$_dest" -n "$cbfsname" \ + -t $_t $_offset + fi + xchanged="y"; : +} + +check_vendor_hashes() +{ + x_ cd "$tmpromdir" + [ "$has_hashes" = "n" ] || [ "$nuke" = "nuke" ] || sha512sum \ + --status -c "$hashfile" || x_ sha1sum --status -c "$hashfile" + x_ rm -f "$hashfile" +} |