18 files changed, 1026 insertions, 25 deletions
diff --git a/config/data/coreboot/build.list b/config/data/coreboot/build.list
new file mode 100644
index 00000000..f6535149
--- /dev/null
+++ b/config/data/coreboot/build.list
@@ -0,0 +1 @@
+build/coreboot.rom
diff --git a/config/data/coreboot/mkhelper.cfg b/config/data/coreboot/mkhelper.cfg
index a1c48e63..3c8b18d9 100644
--- a/config/data/coreboot/mkhelper.cfg
+++ b/config/data/coreboot/mkhelper.cfg
@@ -1,14 +1,32 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# can be overridden per-tree e.g. use mrchromebox
+url="https://github.com/coreboot/coreboot.git"
+bkup_url="https://review.coreboot.org/coreboot"
+
 makeargs="UPDATED_SUBMODULES=1 CPUS=$XBMK_THREADS"
-build_depend="seabios/default grub/default memtest86plus"
+build_depend="seabios/build grub/default memtest86plus/default u-boot/amd64coreboot"
+
+seavgabiosrom="elf/seabios/default/build/libgfxinit/vgabios.bin"
 
-seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
+payload_seabios="n"
+payload_memtest="n"
+payload_grub="n"
+payload_grubsea="n"
 
-pv="payload_uboot payload_seabios payload_memtest payload_grub"
-v="initmode ubootelf grub_scan_disk uboot_config grubtree grubelf pname"
-v="$v displaymode tmprom"
-eval `setvars "n" $pv`
-eval `setvars "" $v`
+initmode=""
+ubootelf=""
+grub_scan_disk=""
+uboot_config=""
+grubtree=""
+grubelf=""
+pname=""
+displaymode=""
+tmprom=""
+newrom=""
+payload_uboot=""
+cbfscfg=""
 
-premake="mkvendorfiles"
-mkhelper="mkcorebootbin"
-postmake="mkcoreboottar"
+premake="corebootpremake"
+mkhelper="$if_not_dry_build coreboot_pad_one_byte"
+postmake="$if_not_dry_build mkcorebootbin"
diff --git a/config/data/grub/bootorder_uboot b/config/data/grub/bootorder_uboot
new file mode 100644
index 00000000..80641a36
--- /dev/null
+++ b/config/data/grub/bootorder_uboot
@@ -0,0 +1 @@
+/rom@img/u-boot
diff --git a/config/data/grub/cfg/default.config b/config/data/grub/cfg/default.config
new file mode 100644
index 00000000..3d84413e
--- /dev/null
+++ b/config/data/grub/cfg/default.config
@@ -0,0 +1,305 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+# Copyright (C) 2014-2016,2020-2021,2023-2025 Leah Rowe <leah@libreboot.org>
+# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org>
+
+set prefix=(memdisk)/boot/grub
+
+insmod at_keyboard
+insmod usb_keyboard
+insmod nativedisk
+insmod ehci
+insmod ohci
+insmod uhci
+insmod usb
+insmod usbms
+insmod regexp
+
+terminal_input --append at_keyboard
+terminal_input --append usb_keyboard
+terminal_output --append cbmemc
+
+# User interface overrides wherever "keystatus" is supported
+# Keep SHIFT key pressed before powering on to disable graphics
+if keystatus --shift; then
+	terminal_output --append vga_text
+else
+	gfxpayload=keep
+	terminal_output --append gfxterm
+
+	for dt in cbfsdisk memdisk; do
+		for it in png jpg; do
+			if [ -f (${dt})/background.${it} ]; then
+				insmod ${it}
+				background_image (${dt})/background.${it}
+			fi
+		done
+	done
+fi
+
+# Keep CTRL pressed to enable default serial terminal (COM1 or the like)
+if keystatus --ctrl; then
+	serial
+	terminal_input --append serial
+	terminal_output --append serial
+fi
+
+# Keep ALT pressed to enable spkmodem
+if keystatus --alt; then
+	terminal_output --append spkmodem
+fi
+
+
+set default="0"
+if [ -f (cbfsdisk)/timeout.cfg ]; then
+	source (cbfsdisk)/timeout.cfg
+else	
+	set timeout=8
+fi
+set grub_scan_disk="ahci ata"
+if [ -f (cbfsdisk)/scan.cfg ]; then
+	source (cbfsdisk)/scan.cfg
+fi
+
+if [ -f (cbfsdisk)/keymap.gkb ]; then
+	keymap (cbfsdisk)/keymap.gkb
+fi
+
+function really_try_user_config {
+	set root="${1}"
+
+	if [ -f /"${2}"/grub.cfg ]; then
+		unset superusers
+		configfile /"${2}"/grub.cfg
+	fi
+}
+
+function try_user_config {
+	# The @/... entries are for cases where the BTRFS filesystem is being used
+	for dir in grub boot/grub @/grub @/boot/grub grub2 boot/grub2 @/grub2 @/boot/grub2 boot @/boot; do
+		really_try_user_config "${1}" "${dir}"
+	done
+	for dir in ubuntu debian redhat; do
+		really_try_user_config "${1}" "EFI/${dir}"
+	done
+}
+function search_grub {
+	echo -n "Attempting to load grub.cfg from '${1}' devices"
+	for i in 0 1 2 3 4 5 6 7 8; do
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+			if [ "${1}" != "nvme" ]; then
+				try_user_config "(${1}${i},${part})"
+			fi
+		done
+		if [ "${1}" != "nvme" ]; then
+			# raw devices e.g. (ahci0) instead of (ahci0,1)
+			try_user_config "(${1}${i})"
+		fi
+	done
+	echo # Insert newline
+}
+
+function try_isolinux_config {
+	set root="${1}"
+	for dir in '' /boot /EFI /@ /@/boot; do
+		if [ -f "${dir}"/isolinux/isolinux.cfg ]; then
+			syslinux_configfile -i "${dir}"/isolinux/isolinux.cfg
+		elif [ -f "${dir}"/syslinux/syslinux.cfg ]; then
+			syslinux_configfile -s "${dir}"/syslinux/syslinux.cfg
+		elif [ -f "${dir}"/syslinux/extlinux.conf ]; then
+			syslinux_configfile -s "${dir}"/syslinux/extlinux.conf
+		elif [ -f "${dir}"/extlinux/extlinux.conf ]; then
+			syslinux_configfile -s "${dir}"/extlinux/extlinux.conf
+		fi
+	done
+}
+function search_isolinux {
+	echo "\nAttempting to parse iso/sys/extlinux config from '${1}' devices"
+	for i in 0 1 2 3 4 5 6 7 8; do
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+			if [ "${1}" != "nvme" ]; then
+				try_isolinux_config "(${1}${i},${part})"
+			fi
+		done
+		if [ "${1}" != "nvme" ]; then
+			# raw devices e.g. (usb0) instead of (usb0,1)
+			try_isolinux_config "(${1}${i})"
+		fi
+	done
+	echo # Insert newline
+}
+function try_bootcfg {
+	try_user_config "${1}"
+	try_isolinux_config "${1}"
+}
+function search_bootcfg {
+	search_grub "${1}"
+	search_isolinux "${1}"
+}
+menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o' {
+
+	for grub_disk in ${grub_scan_disk}; do
+		search_bootcfg ${grub_disk}
+	done
+
+	# grub device enumeration is very slow, so checks are hardcoded
+
+	raidvol="md/0 md/1 md/2 md/3 md/4 md/5 md/6 md/7 md/8 md/9"
+
+	# in practise, doing multiple redundant checks is perfectly fast
+	# TODO: optimize grub itself, and use */? here for everything
+
+	for vol in ${raidvol} ; do
+		try_bootcfg "${vol}"
+	done
+
+	unset bootdev
+	for grub_disk in ${grub_scan_disk}; do
+		for i in 0 1 2 3 4 5 6 7 8; do
+			for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+				if [ "${grub_disk}" = "ahci" ]; then
+					bootdev="${bootdev} (ahci${i},${part})"
+				elif [ "${grub_disk}" = "ata" ]; then
+					bootdev="${bootdev} (ata${i},${part})"
+				elif [ "${grub_disk}" = "nvme" ]; then
+					# TODO: do we care about other namesapces
+					bootdev="${bootdev} (nvme${i}n1,${part})"
+				fi
+			done
+		done
+	done
+
+	set pager=0
+	echo -n "Attempting to unlock encrypted volumes"
+	for dev in ${bootdev} ${raidvol}; do
+		if cryptomount "${dev}" ; then break ; fi
+	done
+	set pager=1
+	echo
+
+	search_bootcfg crypto
+
+	lvmvol=""
+
+	# after cryptomount, lvm volumes might be available
+	# using * is slow on some machines, but we use it here,
+	# just once. in so doing, we find every lvm volume
+	for vol in (*); do
+		if regexp ^\\(lvm/ $vol; then
+			lvmvol="${lvmvol} ${vol}"
+			try_bootcfg "${vol}"
+		fi
+	done
+
+	# user might have put luks inside lvm
+	set pager=0
+	echo "Attempting to unlock encrypted LVMs"
+	for vol in ${lvmvol}; do
+		cryptomount "$vol"
+	done
+	set pager=1
+	echo
+
+	search_bootcfg crypto
+
+	true # Prevent pager requiring to accept each line instead of whole screen
+}
+
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on USB  [s]' --hotkey='s' {
+	search_bootcfg usb
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on AHCI  [a]' --hotkey='a' {
+	search_bootcfg ahci
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE  [d]' --hotkey='d' {
+	search_bootcfg ata
+}
+if [ -f (cbfsdisk)/grub.cfg ]; then
+menuentry 'Load configuration (grub.cfg) in CBFS  [t]' --hotkey='t' {
+	set root='(cbfsdisk)'
+	if [ -f /grub.cfg ]; then
+		configfile /grub.cfg
+	fi
+}
+fi
+if [ -f (cbfsdisk)/grubtest.cfg ]; then
+menuentry 'Load test configuration (grubtest.cfg) inside of CBFS  [t]' --hotkey='t' {
+	set root='(cbfsdisk)'
+	if [ -f /grubtest.cfg ]; then
+		configfile /grubtest.cfg
+	fi
+}
+fi
+if [ -f (cbfsdisk)/u-boot ]; then
+menuentry 'U-Boot i386 payload (experimental) [u]' --hotkey='u' {
+	set root='cbfsdisk'
+	chainloader /u-boot
+}
+fi
+if [ -f (cbfsdisk)/seabios.elf ]; then
+if [ -f (cbfsdisk)/img/u-boot ]; then
+menuentry 'Load SeaBIOS (U-Boot UEFI available in the ESC menu) [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /seabios.elf
+}
+else
+menuentry 'Load SeaBIOS [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /seabios.elf
+}
+fi
+fi
+if [ -f (cbfsdisk)/img/grub2 ]; then
+if [ -f (cbfsdisk)/img/u-boot ]; then
+menuentry 'Return to SeaBIOS (U-Boot UEFI available in the ESC menu) [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /fallback/payload
+}
+else
+menuentry 'Return to SeaBIOS [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /fallback/payload
+}
+fi
+fi
+menuentry 'Poweroff  [p]' --hotkey='p' {
+	halt
+}
+menuentry 'Reboot  [r]' --hotkey='r' {
+	reboot
+}
+if [ -f (cbfsdisk)/img/memtest ]; then
+menuentry 'Load MemTest86+  [m]' --hotkey='m' {
+	set root='cbfsdisk'
+	chainloader /img/memtest
+}
+fi
+
+submenu 'Other  [z]' --hotkey='z' {
+	menuentry 'Enable default serial terminal  [s]' --hotkey='s'  {
+		serial
+		terminal_input --append serial
+		terminal_output --append serial
+	}
+
+	menuentry 'Disable default serial terminal' {
+		terminal_input --remove serial
+		terminal_output --remove serial
+	}
+
+	menuentry 'Enable gfxterm' {
+		terminal_output --append gfxterm
+		terminal_output --remove vga_text
+	}
+	menuentry 'Disable gfxterm  [g]' --hotkey='g'  {
+		terminal_output --remove gfxterm
+		terminal_output --append vga_text
+	}
+
+	menuentry 'Enable spkmodem  [a]' --hotkey='a' {
+		terminal_output --append spkmodem
+	}
+
+	menuentry 'Disable spkmodem  [z]' --hotkey='z' {
+		terminal_output --remove spkmodem
+	}
+}
diff --git a/config/data/grub/cfg/nvme.config b/config/data/grub/cfg/nvme.config
new file mode 100644
index 00000000..4f3de36e
--- /dev/null
+++ b/config/data/grub/cfg/nvme.config
@@ -0,0 +1,320 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+# Copyright (C) 2014-2016,2020-2021,2023-2025 Leah Rowe <leah@libreboot.org>
+# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org>
+
+set prefix=(memdisk)/boot/grub
+
+insmod at_keyboard
+insmod usb_keyboard
+insmod nativedisk
+insmod ehci
+insmod ohci
+insmod uhci
+insmod usb
+insmod usbms
+insmod regexp
+
+terminal_input --append at_keyboard
+terminal_input --append usb_keyboard
+terminal_output --append cbmemc
+
+# User interface overrides wherever "keystatus" is supported
+# Keep SHIFT key pressed before powering on to disable graphics
+if keystatus --shift; then
+	terminal_output --append vga_text
+else
+	gfxpayload=keep
+	terminal_output --append gfxterm
+
+	for dt in cbfsdisk memdisk; do
+		for it in png jpg; do
+			if [ -f (${dt})/background.${it} ]; then
+				insmod ${it}
+				background_image (${dt})/background.${it}
+			fi
+		done
+	done
+fi
+
+# Keep CTRL pressed to enable default serial terminal (COM1 or the like)
+if keystatus --ctrl; then
+	serial
+	terminal_input --append serial
+	terminal_output --append serial
+fi
+
+# Keep ALT pressed to enable spkmodem
+if keystatus --alt; then
+	terminal_output --append spkmodem
+fi
+
+
+set default="0"
+if [ -f (cbfsdisk)/timeout.cfg ]; then
+	source (cbfsdisk)/timeout.cfg
+else	
+	set timeout=8
+fi
+set grub_scan_disk="nvme ahci ata"
+if [ -f (cbfsdisk)/scan.cfg ]; then
+	source (cbfsdisk)/scan.cfg
+fi
+
+if [ -f (cbfsdisk)/keymap.gkb ]; then
+	keymap (cbfsdisk)/keymap.gkb
+fi
+
+function really_try_user_config {
+	set root="${1}"
+
+	if [ -f /"${2}"/grub.cfg ]; then
+		unset superusers
+		configfile /"${2}"/grub.cfg
+	fi
+}
+
+function try_user_config {
+	# The @/... entries are for cases where the BTRFS filesystem is being used
+	for dir in grub boot/grub @/grub @/boot/grub grub2 boot/grub2 @/grub2 @/boot/grub2 boot @/boot; do
+		really_try_user_config "${1}" "${dir}"
+	done
+	for dir in ubuntu debian redhat; do
+		really_try_user_config "${1}" "EFI/${dir}"
+	done
+}
+function search_grub {
+	echo -n "Attempting to load grub.cfg from '${1}' devices"
+	for i in 0 1 2 3 4 5 6 7 8; do
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+			if [ "${1}" != "nvme" ]; then
+				try_user_config "(${1}${i},${part})"
+			else
+				# TODO: do we care about other namesapces
+				try_user_config "(nvme${i}n1,${part})"
+			fi
+		done
+		if [ "${1}" != "nvme" ]; then
+			# raw devices e.g. (ahci0) instead of (ahci0,1)
+			try_user_config "(${1}${i})"
+		else
+			# TODO: do we care about other namesapces
+			try_user_config "(nvme${i}n1)"
+		fi
+	done
+	echo # Insert newline
+}
+
+function try_isolinux_config {
+	set root="${1}"
+	for dir in '' /boot /EFI /@ /@/boot; do
+		if [ -f "${dir}"/isolinux/isolinux.cfg ]; then
+			syslinux_configfile -i "${dir}"/isolinux/isolinux.cfg
+		elif [ -f "${dir}"/syslinux/syslinux.cfg ]; then
+			syslinux_configfile -s "${dir}"/syslinux/syslinux.cfg
+		elif [ -f "${dir}"/syslinux/extlinux.conf ]; then
+			syslinux_configfile -s "${dir}"/syslinux/extlinux.conf
+		elif [ -f "${dir}"/extlinux/extlinux.conf ]; then
+			syslinux_configfile -s "${dir}"/extlinux/extlinux.conf
+		fi
+	done
+}
+function search_isolinux {
+	echo "\nAttempting to parse iso/sys/extlinux config from '${1}' devices"
+	for i in 0 1 2 3 4 5 6 7 8; do
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+			if [ "${1}" != "nvme" ]; then
+				try_isolinux_config "(${1}${i},${part})"
+			else
+				# TODO: see above
+				try_isolinux_config "(nvme${i}n1,${part})"
+			fi
+		done
+		if [ "${1}" != "nvme" ]; then
+			# raw devices e.g. (usb0) instead of (usb0,1)
+			try_isolinux_config "(${1}${i})"
+		else
+			# TODO: do we care about other namesapces
+			try_isolinux_config "(nvme${i}n1)"
+		fi
+	done
+	echo # Insert newline
+}
+function try_bootcfg {
+	try_user_config "${1}"
+	try_isolinux_config "${1}"
+}
+function search_bootcfg {
+	search_grub "${1}"
+	search_isolinux "${1}"
+}
+menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o' {
+
+	for grub_disk in ${grub_scan_disk}; do
+		search_bootcfg ${grub_disk}
+	done
+
+	# grub device enumeration is very slow, so checks are hardcoded
+
+	raidvol="md/0 md/1 md/2 md/3 md/4 md/5 md/6 md/7 md/8 md/9"
+
+	# in practise, doing multiple redundant checks is perfectly fast
+	# TODO: optimize grub itself, and use */? here for everything
+
+	for vol in ${raidvol} ; do
+		try_bootcfg "${vol}"
+	done
+
+	unset bootdev
+	for grub_disk in ${grub_scan_disk}; do
+		for i in 0 1 2 3 4 5 6 7 8; do
+			for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+				if [ "${grub_disk}" = "ahci" ]; then
+					bootdev="${bootdev} (ahci${i},${part})"
+				elif [ "${grub_disk}" = "ata" ]; then
+					bootdev="${bootdev} (ata${i},${part})"
+				elif [ "${grub_disk}" = "nvme" ]; then
+					# TODO: do we care about other namesapces
+					bootdev="${bootdev} (nvme${i}n1,${part})"
+				fi
+			done
+		done
+	done
+
+	set pager=0
+	echo -n "Attempting to unlock encrypted volumes"
+	for dev in ${bootdev} ${raidvol}; do
+		if cryptomount "${dev}" ; then break ; fi
+	done
+	set pager=1
+	echo
+
+	search_bootcfg crypto
+
+	lvmvol=""
+
+	# after cryptomount, lvm volumes might be available
+	# using * is slow on some machines, but we use it here,
+	# just once. in so doing, we find every lvm volume
+	for vol in (*); do
+		if regexp ^\\(lvm/ $vol; then
+			lvmvol="${lvmvol} ${vol}"
+			try_bootcfg "${vol}"
+		fi
+	done
+
+	# user might have put luks inside lvm
+	set pager=0
+	echo "Attempting to unlock encrypted LVMs"
+	for vol in ${lvmvol}; do
+		cryptomount "$vol"
+	done
+	set pager=1
+	echo
+
+	search_bootcfg crypto
+
+	true # Prevent pager requiring to accept each line instead of whole screen
+}
+
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on USB  [s]' --hotkey='s' {
+	search_bootcfg usb
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on AHCI  [a]' --hotkey='a' {
+	search_bootcfg ahci
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE  [d]' --hotkey='d' {
+	search_bootcfg ata
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe  [e]' --hotkey='e' {
+	search_bootcfg nvme
+}
+if [ -f (cbfsdisk)/grub.cfg ]; then
+menuentry 'Load configuration (grub.cfg) in CBFS  [t]' --hotkey='t' {
+	set root='(cbfsdisk)'
+	if [ -f /grub.cfg ]; then
+		configfile /grub.cfg
+	fi
+}
+fi
+if [ -f (cbfsdisk)/grubtest.cfg ]; then
+menuentry 'Load test configuration (grubtest.cfg) inside of CBFS  [t]' --hotkey='t' {
+	set root='(cbfsdisk)'
+	if [ -f /grubtest.cfg ]; then
+		configfile /grubtest.cfg
+	fi
+}
+fi
+if [ -f (cbfsdisk)/u-boot ]; then
+menuentry 'U-Boot i386 payload (experimental) [u]' --hotkey='u' {
+	set root='cbfsdisk'
+	chainloader /u-boot
+}
+fi
+if [ -f (cbfsdisk)/seabios.elf ]; then
+if [ -f (cbfsdisk)/img/u-boot ]; then
+menuentry 'Load SeaBIOS (U-Boot UEFI available in the ESC menu) [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /seabios.elf
+}
+else
+menuentry 'Load SeaBIOS [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /seabios.elf
+}
+fi
+fi
+if [ -f (cbfsdisk)/img/grub2 ]; then
+if [ -f (cbfsdisk)/img/u-boot ]; then
+menuentry 'Return to SeaBIOS (U-Boot UEFI available in the ESC menu) [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /fallback/payload
+}
+else
+menuentry 'Return to SeaBIOS [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /fallback/payload
+}
+fi
+fi
+menuentry 'Poweroff  [p]' --hotkey='p' {
+	halt
+}
+menuentry 'Reboot  [r]' --hotkey='r' {
+	reboot
+}
+if [ -f (cbfsdisk)/img/memtest ]; then
+menuentry 'Load MemTest86+  [m]' --hotkey='m' {
+	set root='cbfsdisk'
+	chainloader /img/memtest
+}
+fi
+
+submenu 'Other  [z]' --hotkey='z' {
+	menuentry 'Enable default serial terminal  [s]' --hotkey='s'  {
+		serial
+		terminal_input --append serial
+		terminal_output --append serial
+	}
+
+	menuentry 'Disable default serial terminal' {
+		terminal_input --remove serial
+		terminal_output --remove serial
+	}
+
+	menuentry 'Enable gfxterm' {
+		terminal_output --append gfxterm
+		terminal_output --remove vga_text
+	}
+	menuentry 'Disable gfxterm  [g]' --hotkey='g'  {
+		terminal_output --remove gfxterm
+		terminal_output --append vga_text
+	}
+
+	menuentry 'Enable spkmodem  [a]' --hotkey='a' {
+		terminal_output --append spkmodem
+	}
+
+	menuentry 'Disable spkmodem  [z]' --hotkey='z' {
+		terminal_output --remove spkmodem
+	}
+}
diff --git a/config/data/grub/cfg/xhci_nvme.config b/config/data/grub/cfg/xhci_nvme.config
new file mode 100644
index 00000000..9db22fe2
--- /dev/null
+++ b/config/data/grub/cfg/xhci_nvme.config
@@ -0,0 +1,321 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+# Copyright (C) 2014-2016,2020-2021,2023-2025 Leah Rowe <leah@libreboot.org>
+# Copyright (C) 2015 Klemens Nanni <contact@autoboot.org>
+
+set prefix=(memdisk)/boot/grub
+
+insmod at_keyboard
+insmod usb_keyboard
+insmod nativedisk
+insmod xhci
+insmod ehci
+insmod ohci
+insmod uhci
+insmod usb
+insmod usbms
+insmod regexp
+
+terminal_input --append at_keyboard
+terminal_input --append usb_keyboard
+terminal_output --append cbmemc
+
+# User interface overrides wherever "keystatus" is supported
+# Keep SHIFT key pressed before powering on to disable graphics
+if keystatus --shift; then
+	terminal_output --append vga_text
+else
+	gfxpayload=keep
+	terminal_output --append gfxterm
+
+	for dt in cbfsdisk memdisk; do
+		for it in png jpg; do
+			if [ -f (${dt})/background.${it} ]; then
+				insmod ${it}
+				background_image (${dt})/background.${it}
+			fi
+		done
+	done
+fi
+
+# Keep CTRL pressed to enable default serial terminal (COM1 or the like)
+if keystatus --ctrl; then
+	serial
+	terminal_input --append serial
+	terminal_output --append serial
+fi
+
+# Keep ALT pressed to enable spkmodem
+if keystatus --alt; then
+	terminal_output --append spkmodem
+fi
+
+
+set default="0"
+if [ -f (cbfsdisk)/timeout.cfg ]; then
+	source (cbfsdisk)/timeout.cfg
+else	
+	set timeout=8
+fi
+set grub_scan_disk="nvme ahci ata"
+if [ -f (cbfsdisk)/scan.cfg ]; then
+	source (cbfsdisk)/scan.cfg
+fi
+
+if [ -f (cbfsdisk)/keymap.gkb ]; then
+	keymap (cbfsdisk)/keymap.gkb
+fi
+
+function really_try_user_config {
+	set root="${1}"
+
+	if [ -f /"${2}"/grub.cfg ]; then
+		unset superusers
+		configfile /"${2}"/grub.cfg
+	fi
+}
+
+function try_user_config {
+	# The @/... entries are for cases where the BTRFS filesystem is being used
+	for dir in grub boot/grub @/grub @/boot/grub grub2 boot/grub2 @/grub2 @/boot/grub2 boot @/boot; do
+		really_try_user_config "${1}" "${dir}"
+	done
+	for dir in ubuntu debian redhat; do
+		really_try_user_config "${1}" "EFI/${dir}"
+	done
+}
+function search_grub {
+	echo -n "Attempting to load grub.cfg from '${1}' devices"
+	for i in 0 1 2 3 4 5 6 7 8; do
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+			if [ "${1}" != "nvme" ]; then
+				try_user_config "(${1}${i},${part})"
+			else
+				# TODO: do we care about other namesapces
+				try_user_config "(nvme${i}n1,${part})"
+			fi
+		done
+		if [ "${1}" != "nvme" ]; then
+			# raw devices e.g. (ahci0) instead of (ahci0,1)
+			try_user_config "(${1}${i})"
+		else
+			# TODO: do we care about other namesapces
+			try_user_config "(nvme${i}n1)"
+		fi
+	done
+	echo # Insert newline
+}
+
+function try_isolinux_config {
+	set root="${1}"
+	for dir in '' /boot /EFI /@ /@/boot; do
+		if [ -f "${dir}"/isolinux/isolinux.cfg ]; then
+			syslinux_configfile -i "${dir}"/isolinux/isolinux.cfg
+		elif [ -f "${dir}"/syslinux/syslinux.cfg ]; then
+			syslinux_configfile -s "${dir}"/syslinux/syslinux.cfg
+		elif [ -f "${dir}"/syslinux/extlinux.conf ]; then
+			syslinux_configfile -s "${dir}"/syslinux/extlinux.conf
+		elif [ -f "${dir}"/extlinux/extlinux.conf ]; then
+			syslinux_configfile -s "${dir}"/extlinux/extlinux.conf
+		fi
+	done
+}
+function search_isolinux {
+	echo "\nAttempting to parse iso/sys/extlinux config from '${1}' devices"
+	for i in 0 1 2 3 4 5 6 7 8; do
+		for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+			if [ "${1}" != "nvme" ]; then
+				try_isolinux_config "(${1}${i},${part})"
+			else
+				# TODO: see above
+				try_isolinux_config "(nvme${i}n1,${part})"
+			fi
+		done
+		if [ "${1}" != "nvme" ]; then
+			# raw devices e.g. (usb0) instead of (usb0,1)
+			try_isolinux_config "(${1}${i})"
+		else
+			# TODO: do we care about other namesapces
+			try_isolinux_config "(nvme${i}n1)"
+		fi
+	done
+	echo # Insert newline
+}
+function try_bootcfg {
+	try_user_config "${1}"
+	try_isolinux_config "${1}"
+}
+function search_bootcfg {
+	search_grub "${1}"
+	search_isolinux "${1}"
+}
+menuentry 'Load Operating System (incl. fully encrypted disks)  [o]' --hotkey='o' {
+
+	for grub_disk in ${grub_scan_disk}; do
+		search_bootcfg ${grub_disk}
+	done
+
+	# grub device enumeration is very slow, so checks are hardcoded
+
+	raidvol="md/0 md/1 md/2 md/3 md/4 md/5 md/6 md/7 md/8 md/9"
+
+	# in practise, doing multiple redundant checks is perfectly fast
+	# TODO: optimize grub itself, and use */? here for everything
+
+	for vol in ${raidvol} ; do
+		try_bootcfg "${vol}"
+	done
+
+	unset bootdev
+	for grub_disk in ${grub_scan_disk}; do
+		for i in 0 1 2 3 4 5 6 7 8; do
+			for part in 1 2 3 4 5 6 7 8 9 10 11 12; do
+				if [ "${grub_disk}" = "ahci" ]; then
+					bootdev="${bootdev} (ahci${i},${part})"
+				elif [ "${grub_disk}" = "ata" ]; then
+					bootdev="${bootdev} (ata${i},${part})"
+				elif [ "${grub_disk}" = "nvme" ]; then
+					# TODO: do we care about other namesapces
+					bootdev="${bootdev} (nvme${i}n1,${part})"
+				fi
+			done
+		done
+	done
+
+	set pager=0
+	echo -n "Attempting to unlock encrypted volumes"
+	for dev in ${bootdev} ${raidvol}; do
+		if cryptomount "${dev}" ; then break ; fi
+	done
+	set pager=1
+	echo
+
+	search_bootcfg crypto
+
+	lvmvol=""
+
+	# after cryptomount, lvm volumes might be available
+	# using * is slow on some machines, but we use it here,
+	# just once. in so doing, we find every lvm volume
+	for vol in (*); do
+		if regexp ^\\(lvm/ $vol; then
+			lvmvol="${lvmvol} ${vol}"
+			try_bootcfg "${vol}"
+		fi
+	done
+
+	# user might have put luks inside lvm
+	set pager=0
+	echo "Attempting to unlock encrypted LVMs"
+	for vol in ${lvmvol}; do
+		cryptomount "$vol"
+	done
+	set pager=1
+	echo
+
+	search_bootcfg crypto
+
+	true # Prevent pager requiring to accept each line instead of whole screen
+}
+
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on USB  [s]' --hotkey='s' {
+	search_bootcfg usb
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on AHCI  [a]' --hotkey='a' {
+	search_bootcfg ahci
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on ATA/IDE  [d]' --hotkey='d' {
+	search_bootcfg ata
+}
+menuentry 'Search for GRUB/SYSLINUX/EXTLINUX/ISOLINUX on NVMe  [e]' --hotkey='e' {
+	search_bootcfg nvme
+}
+if [ -f (cbfsdisk)/grub.cfg ]; then
+menuentry 'Load configuration (grub.cfg) in CBFS  [t]' --hotkey='t' {
+	set root='(cbfsdisk)'
+	if [ -f /grub.cfg ]; then
+		configfile /grub.cfg
+	fi
+}
+fi
+if [ -f (cbfsdisk)/grubtest.cfg ]; then
+menuentry 'Load test configuration (grubtest.cfg) in CBFS  [t]' --hotkey='t' {
+	set root='(cbfsdisk)'
+	if [ -f /grubtest.cfg ]; then
+		configfile /grubtest.cfg
+	fi
+}
+fi
+if [ -f (cbfsdisk)/u-boot ]; then
+menuentry 'U-Boot i386 payload (experimental) [u]' --hotkey='u' {
+	set root='cbfsdisk'
+	chainloader /u-boot
+}
+fi
+if [ -f (cbfsdisk)/seabios.elf ]; then
+if [ -f (cbfsdisk)/img/u-boot ]; then
+menuentry 'Load SeaBIOS (U-Boot UEFI available in the ESC menu) [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /seabios.elf
+}
+else
+menuentry 'Load SeaBIOS [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /seabios.elf
+}
+fi
+fi
+if [ -f (cbfsdisk)/img/grub2 ]; then
+if [ -f (cbfsdisk)/img/u-boot ]; then
+menuentry 'Return to SeaBIOS (U-Boot UEFI available in the ESC menu) [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /fallback/payload
+}
+else
+menuentry 'Return to SeaBIOS [b]' --hotkey='b' {
+	set root='cbfsdisk'
+	chainloader /fallback/payload
+}
+fi
+fi
+menuentry 'Poweroff  [p]' --hotkey='p' {
+	halt
+}
+menuentry 'Reboot  [r]' --hotkey='r' {
+	reboot
+}
+if [ -f (cbfsdisk)/img/memtest ]; then
+menuentry 'Load MemTest86+  [m]' --hotkey='m' {
+	set root='cbfsdisk'
+	chainloader /img/memtest
+}
+fi
+
+submenu 'Other  [z]' --hotkey='z' {
+	menuentry 'Enable default serial terminal  [s]' --hotkey='s'  {
+		serial
+		terminal_input --append serial
+		terminal_output --append serial
+	}
+
+	menuentry 'Disable default serial terminal' {
+		terminal_input --remove serial
+		terminal_output --remove serial
+	}
+
+	menuentry 'Enable gfxterm' {
+		terminal_output --append gfxterm
+		terminal_output --remove vga_text
+	}
+	menuentry 'Disable gfxterm  [g]' --hotkey='g'  {
+		terminal_output --remove gfxterm
+		terminal_output --append vga_text
+	}
+
+	menuentry 'Enable spkmodem  [a]' --hotkey='a' {
+		terminal_output --append spkmodem
+	}
+
+	menuentry 'Disable spkmodem  [z]' --hotkey='z' {
+		terminal_output --remove spkmodem
+	}
+}
diff --git a/config/data/grub/keymap/dkqwerty.gkb b/config/data/grub/keymap/dkqwerty.gkb
new file mode 100644
index 00000000..aef62970
--- /dev/null
+++ b/config/data/grub/keymap/dkqwerty.gkb
diff --git a/config/data/grub/keymap/noqwerty.gkb b/config/data/grub/keymap/noqwerty.gkb
new file mode 100644
index 00000000..7ad9b7e4
--- /dev/null
+++ b/config/data/grub/keymap/noqwerty.gkb
diff --git a/config/data/grub/mkhelper.cfg b/config/data/grub/mkhelper.cfg
index ff93a27c..9e8dee58 100644
--- a/config/data/grub/mkhelper.cfg
+++ b/config/data/grub/mkhelper.cfg
@@ -1,5 +1,12 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# can be overridden per-tree
+url="git://git.savannah.gnu.org/grub.git"
+bkup_url="https://codeberg.org/libreboot/grub"
+
 bootstrapargs="--gnulib-srcdir=gnulib/ --no-git"
-autoconfargs="--with-platform=coreboot --disable-werror"
+configureargs="--with-platform=coreboot --disable-werror"
 makeargs="FS_PAYLOAD_MODULES=\"\""
-btype="autohell"
-mkhelper="mkpayload_grub"
+mkhelper="$if_not_dry_build mkpayload_grub"
+
+noconfig="y"
diff --git a/config/data/grub/module/default b/config/data/grub/module/default
index 3555ad11..39030e2a 100755
--- a/config/data/grub/module/default
+++ b/config/data/grub/module/default
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 # Install modules (installed, but not automatically loaded)
 grub_install_modules=" \
 hexdump \
@@ -31,6 +33,7 @@ configfile \
 cpio \
 cpio_be \
 crc64 \
+crypto_cipher_mode_test \
 crypto \
 cryptodisk \
 diskfilter \
@@ -41,15 +44,20 @@ exfat \
 elf \
 ext2 \
 fat \
+functional_test \
 f2fs \
 gcry_arcfour \
+gcry_blake2 \
 gcry_blowfish \
 gcry_camellia \
 gcry_cast5 \
 gcry_crc \
 gcry_des \
 gcry_dsa \
+gcry_hwfeatures \
 gcry_idea \
+gcry_kdf \
+gcry_keccak \
 gcry_md4 \
 gcry_md5 \
 gcry_rfc2268 \
@@ -67,7 +75,6 @@ gcry_whirlpool \
 geli \
 gfxmenu \
 gfxterm_background \
-gfxterm_menu \
 gzio \
 hashsum \
 halt \
@@ -117,6 +124,7 @@ pgp \
 play \
 png \
 procfs \
+pubkey \
 raid5rec \
 raid6rec \
 read \
diff --git a/config/data/grub/module/nvme b/config/data/grub/module/nvme
index 503c61c8..4b832983 100755
--- a/config/data/grub/module/nvme
+++ b/config/data/grub/module/nvme
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 # Install modules (installed, but not automatically loaded)
 grub_install_modules=" \
 hexdump \
@@ -31,6 +33,7 @@ configfile \
 cpio \
 cpio_be \
 crc64 \
+crypto_cipher_mode_test \
 crypto \
 cryptodisk \
 diskfilter \
@@ -41,15 +44,20 @@ exfat \
 elf \
 ext2 \
 fat \
+functional_test \
 f2fs \
 gcry_arcfour \
+gcry_blake2 \
 gcry_blowfish \
 gcry_camellia \
 gcry_cast5 \
 gcry_crc \
 gcry_des \
 gcry_dsa \
+gcry_hwfeatures \
 gcry_idea \
+gcry_kdf \
+gcry_keccak \
 gcry_md4 \
 gcry_md5 \
 gcry_rfc2268 \
@@ -67,7 +75,6 @@ gcry_whirlpool \
 geli \
 gfxmenu \
 gfxterm_background \
-gfxterm_menu \
 gzio \
 hashsum \
 halt \
@@ -118,6 +125,7 @@ pgp \
 play \
 png \
 procfs \
+pubkey \
 raid5rec \
 raid6rec \
 read \
diff --git a/config/data/grub/module/xhci b/config/data/grub/module/xhci_nvme
index 6235bbad..616fca40 100755
--- a/config/data/grub/module/xhci
+++ b/config/data/grub/module/xhci_nvme
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
 # Install modules (installed, but not automatically loaded)
 grub_install_modules=" \
 hexdump \
@@ -32,6 +34,7 @@ configfile \
 cpio \
 cpio_be \
 crc64 \
+crypto_cipher_mode_test \
 crypto \
 cryptodisk \
 diskfilter \
@@ -42,15 +45,20 @@ exfat \
 elf \
 ext2 \
 fat \
+functional_test \
 f2fs \
 gcry_arcfour \
+gcry_blake2 \
 gcry_blowfish \
 gcry_camellia \
 gcry_cast5 \
 gcry_crc \
 gcry_des \
 gcry_dsa \
+gcry_hwfeatures \
 gcry_idea \
+gcry_kdf \
+gcry_keccak \
 gcry_md4 \
 gcry_md5 \
 gcry_rfc2268 \
@@ -68,7 +76,6 @@ gcry_whirlpool \
 geli \
 gfxmenu \
 gfxterm_background \
-gfxterm_menu \
 gzio \
 hashsum \
 halt \
@@ -118,6 +125,7 @@ pcidump \
 pgp \
 play \
 png \
+pubkey \
 procfs \
 raid5rec \
 raid6rec \
diff --git a/config/data/libarchive/build.list b/config/data/libarchive/build.list
new file mode 100644
index 00000000..044f9db2
--- /dev/null
+++ b/config/data/libarchive/build.list
@@ -0,0 +1,3 @@
+bsdtar
+bsdunzip
+bsdcpio
diff --git a/config/data/pcsx-redux/mkhelper.cfg b/config/data/pcsx-redux/mkhelper.cfg
new file mode 100644
index 00000000..d7369797
--- /dev/null
+++ b/config/data/pcsx-redux/mkhelper.cfg
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+mkhelper="$if_not_dry_build copyps1bios"
+postmake="$if_not_dry_build copyps1bios"
diff --git a/config/data/pico-serprog/mkhelper.cfg b/config/data/pico-serprog/mkhelper.cfg
deleted file mode 100644
index 9f6e54cc..00000000
--- a/config/data/pico-serprog/mkhelper.cfg
+++ /dev/null
@@ -1,5 +0,0 @@
-sersrc="src/pico-serprog"
-serx="$sersrc/build/pico_serprog.uf2"
-picosdk="src/pico-sdk"
-serdir="$picosdk/src/boards/include/boards"
-premake="mkserprog rp2040"
diff --git a/config/data/stm32-vserprog/mkhelper.cfg b/config/data/stm32-vserprog/mkhelper.cfg
deleted file mode 100644
index 9d02f799..00000000
--- a/config/data/stm32-vserprog/mkhelper.cfg
+++ /dev/null
@@ -1,4 +0,0 @@
-sersrc="src/stm32-vserprog"
-serx="$sersrc/stm32-vserprog.hex"
-serdir="$sersrc/boards"
-mkhelper="mkserprog stm32"
diff --git a/config/data/u-boot/build.list b/config/data/u-boot/build.list
index 8d9a5cf0..5af3064a 100644
--- a/config/data/u-boot/build.list
+++ b/config/data/u-boot/build.list
@@ -4,3 +4,5 @@ u-boot.dtb
 u-boot.img
 u-boot.itb
 u-boot.elf
+u-boot-dtb.bin
+u-boot-x86-with-spl.bin
diff --git a/config/data/u-boot/mkhelper.cfg b/config/data/u-boot/mkhelper.cfg
new file mode 100644
index 00000000..c47f9580
--- /dev/null
+++ b/config/data/u-boot/mkhelper.cfg
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+url="https://source.denx.de/u-boot/u-boot.git"
+bkup_url="https://github.com/u-boot/u-boot.git"