diff options
Diffstat (limited to 'config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch')
| -rw-r--r-- | config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch b/config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch new file mode 100644 index 00000000..dda8313a --- /dev/null +++ b/config/coreboot/default/patches/0023-mb-dell-Add-Latitude-E5420-Sandy-Bridge.patch @@ -0,0 +1,442 @@ +From 948221e226340c1c5852a73d005ada18120de393 Mon Sep 17 00:00:00 2001 +From: Nicholas Chin <nic.c3.14@gmail.com> +Date: Mon, 4 Mar 2024 18:05:43 -0700 +Subject: [PATCH 23/39] mb/dell: Add Latitude E5420 (Sandy Bridge) + +Mainboard is Krug 14". I do not physically have this system; someone +with physical access to one sent me the output of autoport which I then +modified to produce this port. I was also sent the VBT binary, which was +obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version +A02 of the vendor firmware. + +This was originally tested and found to be working as a standalone board +port in Libreboot, but this variant based port in upstream coreboot has +not been tested. + +This can be internally flashed by sending a command to the EC, which +causes the EC to pull the FDO pin low and the firmware to skip setting +up any chipset based write protections [1]. The EC is the SMSC MEC5055, +which seems to be compatible with the existing MEC5035 code. + +[1] https://gitlab.com/nic3-14159/dell-flash-unlock + +Change-Id: I0283653156083768e1fd451bcf539b4e028589f4 +Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> +--- + src/mainboard/dell/snb_ivb_latitude/Kconfig | 10 +- + .../dell/snb_ivb_latitude/Kconfig.name | 3 + + .../snb_ivb_latitude/variants/e5420/data.vbt | Bin 0 -> 6144 bytes + .../variants/e5420/early_init.c | 14 ++ + .../snb_ivb_latitude/variants/e5420/gpio.c | 195 ++++++++++++++++++ + .../variants/e5420/hda_verb.c | 32 +++ + .../variants/e5420/overridetree.cb | 39 ++++ + 7 files changed, 292 insertions(+), 1 deletion(-) + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c + create mode 100644 src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb + +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig b/src/mainboard/dell/snb_ivb_latitude/Kconfig +index 4e94a7ef80..e6a21ffb99 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig +@@ -17,6 +17,11 @@ config BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select SYSTEM_TYPE_LAPTOP + select USE_NATIVE_RAMINIT + ++config BOARD_DELL_LATITUDE_E5420 ++ select BOARD_DELL_SNB_IVB_LATITUDE_COMMON ++ select BOARD_ROMSIZE_KB_6144 ++ select SOUTHBRIDGE_INTEL_BD82X6X ++ + config BOARD_DELL_LATITUDE_E5520 + select BOARD_DELL_SNB_IVB_LATITUDE_COMMON + select BOARD_ROMSIZE_KB_6144 +@@ -60,6 +65,7 @@ config MAINBOARD_DIR + default "dell/snb_ivb_latitude" + + config MAINBOARD_PART_NUMBER ++ default "Latitude E5420" if BOARD_DELL_LATITUDE_E5420 + default "Latitude E5520" if BOARD_DELL_LATITUDE_E5520 + default "Latitude E6420" if BOARD_DELL_LATITUDE_E6420 + default "Latitude E6520" if BOARD_DELL_LATITUDE_E6520 +@@ -74,6 +80,7 @@ config USBDEBUG_HCD_INDEX + default 2 + + config VARIANT_DIR ++ default "e5420" if BOARD_DELL_LATITUDE_E5420 + default "e5520" if BOARD_DELL_LATITUDE_E5520 + default "e6420" if BOARD_DELL_LATITUDE_E6420 + default "e6520" if BOARD_DELL_LATITUDE_E6520 +@@ -82,7 +89,8 @@ config VARIANT_DIR + default "e6530" if BOARD_DELL_LATITUDE_E6530 + + config VGA_BIOS_ID +- default "8086,0116" if BOARD_DELL_LATITUDE_E6520 ++ default "8086,0116" if BOARD_DELL_LATITUDE_E6520 \ ++ || BOARD_DELL_LATITUDE_E5420 + default "8086,0166" if BOARD_DELL_LATITUDE_E5530 + default "8086,0126" if BOARD_DELL_LATITUDE_E6420 \ + || BOARD_DELL_LATITUDE_E5520 +diff --git a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +index 7976691f21..a3fa2b1837 100644 +--- a/src/mainboard/dell/snb_ivb_latitude/Kconfig.name ++++ b/src/mainboard/dell/snb_ivb_latitude/Kconfig.name +@@ -1,5 +1,8 @@ + ## SPDX-License-Identifier: GPL-2.0-only + ++config BOARD_DELL_LATITUDE_E5420 ++ bool "Latitude E5420" ++ + config BOARD_DELL_LATITUDE_E5520 + bool "Latitude E5520" + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/data.vbt +new file mode 100644 +index 0000000000000000000000000000000000000000..98b82fe6110fd295b5749041ec7f8c084ace5f57 +GIT binary patch +literal 6144 +zcmeHKeQZ-z6hE);wSBvNZ!2$ObQ^;MgV6zl*Rhp}BXnCCMZU^_r7jRwT!kfLo8?3H +zk9)u(7?cb(hChhTM57@QFfmbMB!G!dNsO6BW5OSp5EGF^jHnTTdhUBI+h`e+1ft1q +z^SfW?+;h)4_uO+|XEfEV$91)<gOArWE)OnSTD}Ug6?8a~vz+SmQn!4~y3N7b^|hPp +zR<5aEfv-b8M00Lk251!oO|8(YA6XaeXzkt-Z)@Ee!_{@z#Fro^?DqN4SGjRIu8KYp +zZEufuU@5MM@7jv%h;75FS}ezKv?JDzCH}d%tE)A-GuDb*+B%}~w%88r>}c;!*XQ5O +z)OU7u$J@4U+lk)#GSW%c%c)v`%R6?`w)LIyu6bD7-j0o&X9qUMcEsYlW3BU4rZRvt +zqAUpjf*qXuLCCsU0YM2I5@gB1WKd)f1+Yt?%HWd0DZxYumP(K<LxTif8A39+!KMl} +z31FHG)7?qk5g>e?=ER{f^&}W<0k@mxff(?6+Stw+s6y%k1mM$cLk#^FWWI*9bE1GY +z&VY9?WC1u#23^3^UYw5?H0x2S2gN`x18Fko6_x(#MKyuCU_<D!mEp$qO_An}#@>DV +zdkf*li41yW3p$*0Oo3+63kO6S91*KwP#l2i4jnc)JkUirL^$k}VbH0;CBh#BS=OLf +zW-yE3BRon75gG{_2~QIC5cUzCC%i)FCmbidM>tIwAPf>N5Pl?FC0r*+Sq!oXj!keQ +zVKcyK>TL+gc7oLco$28+FpeeXkEP}_Sea=mk#IWUR^m$!BogvszLPu83FJm0k6K<l +z$#$~YiXtY*GpHp#@FvHJ1UnBD*H%d+{_j24XE4nmBa*?5mOWiold28s3}>*}<HaeO +z+1|-8g2)FCfkDZIdb-Ub);z0#;XEbPfGe?A72!{DAUg|$m+Z~(i@h9j4gtm611ni( +z#u>ACcP}M4exU`*MKVwl5+t6JBpTkmm}xWflKUe~7}`!#%z#gAo{NxUrpDAndYktu +zI0}VLU`J7^xmF1AFiz5S^uzp*DPI$%$qq!(ikh0kP+(GKzF|@N?Y%_#Vp@M+xHr$F +z=%+18z`-fT%z)9-TS$~Dh@2yeN7!UIt0h`fWxUu`JvA_ra*8P48l%7KR0&c1;0R75 +z4f0oz(xQ3MWqz5>qW5M4tZWExHs8<H(e1G@4km@5wEzOOP^x<l`YmA|eKs6j3wl8B +z%C%;uygh%<#kGZ{fymL+OlV0!-*T!V5IB>X@p!@CBU=7e{5^Jl{s7by`po-AJqM2l +znk(=^0bHkF0rUw7)^7j;$=_UIs8`6P6b-;vPDZ#U9L)W1_PAYRDP9k~;5$stt5ZiV +zD0>;i-?OlYY2}P9WVnfGos4xee2r=EGWHR}ADH$VV>cO=xU?!4TjIi)OMBYI_PX#b +zm-eBHed5BOT-x6*W>;{IqAga~G6lCQT93k>Q}CpsomJR*1%FjEkv?fuT%c-8RklXO +zU8;6KWk*zeU)4TW+1D!mrE0EhHZfbBeN{4S7X@Pig%};A99QTdA~wZruL*8y?K!jP +zG5R*k=);S}Zn<T;W!Mxt`(!+z7_r@3LVpf|FESauM&4}+wqzXfba-zG>A}on(uzNF +zyu>BcjA})C@bg%<;+Eh2;Sz4heFFCbZ@C{FrXMIbYzu>?Bi-|vZ}JSFU%JA>7$7et +z0Yo%CnOVZm#ZA}4kWZOn15};h5*#OM3b+6vHzgruMP>=5MNJK1y42{YgveP-!j%#( +z0rGe@8t%!=66Ti%K4|Gx=o7gFp83wQ;+s3H7+r^SKlpp3KKcr!3@|n;NCH_=qL=3T +zq3WH?en`b+W-HR-fnrhw*9aZ%M}lHX7@H?E>!6wv_&YQFEHdA$%Z1R--yub>=c@p? +z6@7Fc$&>sAxwiz{BE$1kb$K9Co=ozlA973y^i(^BM|EZ$$^y`0KyHiMJ%O*XbfEX1 +ziZaH>W(1pWL0bo|T!x__N$^$DpmxI=bL6WUK3JGyn?rw-qC4ZA$yGjIB}N(=ldD2O +zAJ@bxp<qR-3lIv<!P~SE8r*#_Ckl?$0|1fZ>2>n}u*mUIYFd>}O_wuwBD^r9<#=!0 +X1LGbT_rSOZ#yv3ZfpHH!G!Og(1Xg~J + +literal 0 +HcmV?d00001 + +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c +new file mode 100644 +index 0000000000..ff83db095b +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/early_init.c +@@ -0,0 +1,14 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include <bootblock_common.h> ++#include <device/pci_ops.h> ++#include <ec/dell/mec5035/mec5035.h> ++#include <southbridge/intel/bd82x6x/pch.h> ++ ++void bootblock_mainboard_early_init(void) ++{ ++ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN ++ | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN ++ | COMB_LPC_EN | COMA_LPC_EN); ++ mec5035_early_init(); ++} +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c +new file mode 100644 +index 0000000000..f76b93d9f0 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/gpio.c +@@ -0,0 +1,195 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include <southbridge/intel/common/gpio.h> ++ ++static const struct pch_gpio_set1 pch_gpio_set1_mode = { ++ .gpio0 = GPIO_MODE_GPIO, ++ .gpio1 = GPIO_MODE_NATIVE, ++ .gpio2 = GPIO_MODE_GPIO, ++ .gpio3 = GPIO_MODE_GPIO, ++ .gpio4 = GPIO_MODE_GPIO, ++ .gpio5 = GPIO_MODE_NATIVE, ++ .gpio6 = GPIO_MODE_GPIO, ++ .gpio7 = GPIO_MODE_GPIO, ++ .gpio8 = GPIO_MODE_GPIO, ++ .gpio9 = GPIO_MODE_NATIVE, ++ .gpio10 = GPIO_MODE_NATIVE, ++ .gpio11 = GPIO_MODE_NATIVE, ++ .gpio12 = GPIO_MODE_GPIO, ++ .gpio13 = GPIO_MODE_GPIO, ++ .gpio14 = GPIO_MODE_GPIO, ++ .gpio15 = GPIO_MODE_GPIO, ++ .gpio16 = GPIO_MODE_NATIVE, ++ .gpio17 = GPIO_MODE_GPIO, ++ .gpio18 = GPIO_MODE_NATIVE, ++ .gpio19 = GPIO_MODE_GPIO, ++ .gpio20 = GPIO_MODE_NATIVE, ++ .gpio21 = GPIO_MODE_GPIO, ++ .gpio22 = GPIO_MODE_GPIO, ++ .gpio23 = GPIO_MODE_NATIVE, ++ .gpio24 = GPIO_MODE_GPIO, ++ .gpio25 = GPIO_MODE_NATIVE, ++ .gpio26 = GPIO_MODE_NATIVE, ++ .gpio27 = GPIO_MODE_GPIO, ++ .gpio28 = GPIO_MODE_GPIO, ++ .gpio29 = GPIO_MODE_GPIO, ++ .gpio30 = GPIO_MODE_GPIO, ++ .gpio31 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_direction = { ++ .gpio0 = GPIO_DIR_INPUT, ++ .gpio2 = GPIO_DIR_INPUT, ++ .gpio3 = GPIO_DIR_INPUT, ++ .gpio4 = GPIO_DIR_INPUT, ++ .gpio6 = GPIO_DIR_INPUT, ++ .gpio7 = GPIO_DIR_INPUT, ++ .gpio8 = GPIO_DIR_INPUT, ++ .gpio12 = GPIO_DIR_OUTPUT, ++ .gpio13 = GPIO_DIR_INPUT, ++ .gpio14 = GPIO_DIR_INPUT, ++ .gpio15 = GPIO_DIR_INPUT, ++ .gpio17 = GPIO_DIR_INPUT, ++ .gpio19 = GPIO_DIR_INPUT, ++ .gpio21 = GPIO_DIR_INPUT, ++ .gpio22 = GPIO_DIR_INPUT, ++ .gpio24 = GPIO_DIR_INPUT, ++ .gpio27 = GPIO_DIR_INPUT, ++ .gpio28 = GPIO_DIR_INPUT, ++ .gpio29 = GPIO_DIR_INPUT, ++ .gpio30 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_level = { ++ .gpio12 = GPIO_LEVEL_HIGH, ++ .gpio30 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_reset = { ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_invert = { ++ .gpio0 = GPIO_INVERT, ++ .gpio8 = GPIO_INVERT, ++ .gpio14 = GPIO_INVERT, ++}; ++ ++static const struct pch_gpio_set1 pch_gpio_set1_blink = { ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_mode = { ++ .gpio32 = GPIO_MODE_NATIVE, ++ .gpio33 = GPIO_MODE_GPIO, ++ .gpio34 = GPIO_MODE_GPIO, ++ .gpio35 = GPIO_MODE_GPIO, ++ .gpio36 = GPIO_MODE_GPIO, ++ .gpio37 = GPIO_MODE_GPIO, ++ .gpio38 = GPIO_MODE_GPIO, ++ .gpio39 = GPIO_MODE_GPIO, ++ .gpio40 = GPIO_MODE_NATIVE, ++ .gpio41 = GPIO_MODE_NATIVE, ++ .gpio42 = GPIO_MODE_NATIVE, ++ .gpio43 = GPIO_MODE_NATIVE, ++ .gpio44 = GPIO_MODE_NATIVE, ++ .gpio45 = GPIO_MODE_NATIVE, ++ .gpio46 = GPIO_MODE_GPIO, ++ .gpio47 = GPIO_MODE_NATIVE, ++ .gpio48 = GPIO_MODE_GPIO, ++ .gpio49 = GPIO_MODE_NATIVE, ++ .gpio50 = GPIO_MODE_GPIO, ++ .gpio51 = GPIO_MODE_GPIO, ++ .gpio52 = GPIO_MODE_GPIO, ++ .gpio53 = GPIO_MODE_GPIO, ++ .gpio54 = GPIO_MODE_GPIO, ++ .gpio55 = GPIO_MODE_GPIO, ++ .gpio56 = GPIO_MODE_GPIO, ++ .gpio57 = GPIO_MODE_GPIO, ++ .gpio58 = GPIO_MODE_NATIVE, ++ .gpio59 = GPIO_MODE_NATIVE, ++ .gpio60 = GPIO_MODE_GPIO, ++ .gpio61 = GPIO_MODE_NATIVE, ++ .gpio62 = GPIO_MODE_NATIVE, ++ .gpio63 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_direction = { ++ .gpio33 = GPIO_DIR_INPUT, ++ .gpio34 = GPIO_DIR_OUTPUT, ++ .gpio35 = GPIO_DIR_INPUT, ++ .gpio36 = GPIO_DIR_INPUT, ++ .gpio37 = GPIO_DIR_OUTPUT, ++ .gpio38 = GPIO_DIR_INPUT, ++ .gpio39 = GPIO_DIR_INPUT, ++ .gpio46 = GPIO_DIR_OUTPUT, ++ .gpio48 = GPIO_DIR_INPUT, ++ .gpio50 = GPIO_DIR_OUTPUT, ++ .gpio51 = GPIO_DIR_OUTPUT, ++ .gpio52 = GPIO_DIR_INPUT, ++ .gpio53 = GPIO_DIR_INPUT, ++ .gpio54 = GPIO_DIR_INPUT, ++ .gpio55 = GPIO_DIR_OUTPUT, ++ .gpio56 = GPIO_DIR_INPUT, ++ .gpio57 = GPIO_DIR_INPUT, ++ .gpio60 = GPIO_DIR_OUTPUT, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_level = { ++ .gpio34 = GPIO_LEVEL_LOW, ++ .gpio37 = GPIO_LEVEL_LOW, ++ .gpio46 = GPIO_LEVEL_HIGH, ++ .gpio50 = GPIO_LEVEL_HIGH, ++ .gpio51 = GPIO_LEVEL_LOW, ++ .gpio55 = GPIO_LEVEL_LOW, ++ .gpio60 = GPIO_LEVEL_HIGH, ++}; ++ ++static const struct pch_gpio_set2 pch_gpio_set2_reset = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_mode = { ++ .gpio64 = GPIO_MODE_NATIVE, ++ .gpio65 = GPIO_MODE_NATIVE, ++ .gpio66 = GPIO_MODE_NATIVE, ++ .gpio67 = GPIO_MODE_NATIVE, ++ .gpio68 = GPIO_MODE_NATIVE, ++ .gpio69 = GPIO_MODE_NATIVE, ++ .gpio70 = GPIO_MODE_NATIVE, ++ .gpio71 = GPIO_MODE_NATIVE, ++ .gpio72 = GPIO_MODE_NATIVE, ++ .gpio73 = GPIO_MODE_NATIVE, ++ .gpio74 = GPIO_MODE_GPIO, ++ .gpio75 = GPIO_MODE_NATIVE, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_direction = { ++ .gpio74 = GPIO_DIR_INPUT, ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_level = { ++}; ++ ++static const struct pch_gpio_set3 pch_gpio_set3_reset = { ++}; ++ ++const struct pch_gpio_map mainboard_gpio_map = { ++ .set1 = { ++ .mode = &pch_gpio_set1_mode, ++ .direction = &pch_gpio_set1_direction, ++ .level = &pch_gpio_set1_level, ++ .blink = &pch_gpio_set1_blink, ++ .invert = &pch_gpio_set1_invert, ++ .reset = &pch_gpio_set1_reset, ++ }, ++ .set2 = { ++ .mode = &pch_gpio_set2_mode, ++ .direction = &pch_gpio_set2_direction, ++ .level = &pch_gpio_set2_level, ++ .reset = &pch_gpio_set2_reset, ++ }, ++ .set3 = { ++ .mode = &pch_gpio_set3_mode, ++ .direction = &pch_gpio_set3_direction, ++ .level = &pch_gpio_set3_level, ++ .reset = &pch_gpio_set3_reset, ++ }, ++}; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c +new file mode 100644 +index 0000000000..0bc6c35a63 +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/hda_verb.c +@@ -0,0 +1,32 @@ ++/* SPDX-License-Identifier: GPL-2.0-only */ ++ ++#include <device/azalia_device.h> ++ ++const u32 cim_verb_data[] = { ++ 0x111d76e7, /* Codec Vendor / Device ID: IDT */ ++ 0x1028049b, /* Subsystem ID */ ++ 11, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(0, 0x1028049b), ++ AZALIA_PIN_CFG(0, 0x0a, 0x04a11020), ++ AZALIA_PIN_CFG(0, 0x0b, 0x0421101f), ++ AZALIA_PIN_CFG(0, 0x0c, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x0d, 0x90170110), ++ AZALIA_PIN_CFG(0, 0x0e, 0x23011050), ++ AZALIA_PIN_CFG(0, 0x0f, 0x23a1102e), ++ AZALIA_PIN_CFG(0, 0x10, 0x400000f3), ++ AZALIA_PIN_CFG(0, 0x11, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x1f, 0x400000f0), ++ AZALIA_PIN_CFG(0, 0x20, 0xd5a30130), ++ ++ 0x80862805, /* Codec Vendor / Device ID: Intel */ ++ 0x80860101, /* Subsystem ID */ ++ 4, /* Number of 4 dword sets */ ++ AZALIA_SUBVENDOR(3, 0x80860101), ++ AZALIA_PIN_CFG(3, 0x05, 0x18560010), ++ AZALIA_PIN_CFG(3, 0x06, 0x18560020), ++ AZALIA_PIN_CFG(3, 0x07, 0x18560030), ++}; ++ ++const u32 pc_beep_verbs[0] = {}; ++ ++AZALIA_ARRAY_SIZES; +diff --git a/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb +new file mode 100644 +index 0000000000..3f55bfd49d +--- /dev/null ++++ b/src/mainboard/dell/snb_ivb_latitude/variants/e5420/overridetree.cb +@@ -0,0 +1,39 @@ ++## SPDX-License-Identifier: GPL-2.0-or-later ++ ++chip northbridge/intel/sandybridge ++ device domain 0 on ++ subsystemid 0x1028 0x049b inherit ++ ++ device ref igd on ++ register "gpu_cpu_backlight" = "0x00000c31" ++ register "gpu_pch_backlight" = "0x13121312" ++ end ++ ++ chip southbridge/intel/bd82x6x ++ register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 1, 0 }" ++ register "usb_port_config" = "{ ++ { 1, 1, 0 }, ++ { 1, 1, 0 }, ++ { 1, 1, 1 }, ++ { 1, 1, 1 }, ++ { 1, 1, 2 }, ++ { 1, 1, 2 }, ++ { 1, 1, 3 }, ++ { 1, 1, 3 }, ++ { 1, 1, 5 }, ++ { 1, 1, 5 }, ++ { 1, 1, 7 }, ++ { 1, 1, 6 }, ++ { 1, 1, 6 }, ++ { 1, 1, 7 }, ++ }" ++ ++ device ref gbe off end ++ device ref pcie_rp4 off end ++ device ref pcie_rp7 on end # Broadcom BCM5761 Gigabit Ethernet ++ device ref sata1 on ++ register "sata_port_map" = "0x3b" ++ end ++ end ++ end ++end +-- +2.39.2 + |