get.sh: unroll condensed code lines

Signed-off-by: Leah Rowe <leah@libreboot.org>

1 files changed, 163 insertions, 50 deletions

diff --git a/include/get.sh b/include/get.sh
index b5c280a7..26a1691b 100644
--- a/include/get.sh
+++ b/include/get.sh
@@ -10,8 +10,11 @@ tmpgitcache="$xbtmp/tmpgit"
 
 fetch_targets()
 {
-	[ -d "src/$project/$tree" ] || git_prep "$url" "$bkup_url" \
-	    "$xbmkpwd/$configdir/$tree/patches" "src/$project/$tree" submod; :
+	if [ ! -d "src/$project/$tree" ]; then
+		git_prep "$url" "$bkup_url" \
+		    "$xbmkpwd/$configdir/$tree/patches" \
+		    "src/$project/$tree" "submod"
+	fi
 }
 
 fetch_project()
@@ -19,20 +22,33 @@ fetch_project()
 	eval "`setvars "" xtree`"
 	eval "`setcfg "config/git/$project/pkg.cfg"`"
 
-	chkvars url bkup_url && [ -n "$xtree" ] && x_ ./mk -f coreboot "$xtree"
-	[ -z "$depend" ] || for d in $depend ; do
-		x_ ./mk -f $d
-	done
+	chkvars url bkup_url
+
+	if [ -n "$xtree" ]; then
+		x_ ./mk -f coreboot "$xtree"
+	fi
+
+	if [ -n "$depend" ]; then
+		for d in $depend ; do
+			x_ ./mk -f $d
+		done
+	fi
+
 	clone_project
 }
 
 clone_project()
 {
-	loc="$XBMK_CACHE/clone/$project" && singletree "$project" && \
-	    loc="src/$project"
+	loc="$XBMK_CACHE/clone/$project"
+	if singletree "$project"; then
+		loc="src/$project"
+	fi
 
-	e "$loc" d missing && remkdir "${tmpgit%/*}" && git_prep \
-	    "$url" "$bkup_url" "$xbmkpwd/config/$project/patches" "$loc"; :
+	if e "$loc" d missing; then
+		remkdir "${tmpgit%/*}"
+		git_prep "$url" "$bkup_url" \
+		    "$xbmkpwd/config/$project/patches" "$loc"
+	fi
 }
 
 git_prep()
@@ -43,19 +59,25 @@ git_prep()
 	_loc="$4" # $1 and $2 are gitrepo and gitrepo_backup
 
 	chkvars rev
+
 	xbget git "$1" "$2" "$tmpgit" "$rev" "$_patchdir"
 	if singletree "$project" || [ $# -gt 4 ]; then
 		dx_ fetch_submodule "$mdir/module.list"
 	fi
 
-	[ "$_loc" = "${_loc%/*}" ] || x_ mkdir -p "${_loc%/*}"
+	if [ "$_loc" != "${_loc%/*}" ]; then
+		x_ mkdir -p "${_loc%/*}"
+	fi
 	x_ mv "$tmpgit" "$_loc"
 }
 
 fetch_submodule()
 {
-	mcfgdir="$mdir/${1##*/}"; eval \
+	mcfgdir="$mdir/${1##*/}"
+
+	eval \
 	    "`setvars "" subhash subgit subgit_bkup subcurl subcurl_bkup st`"
+
 	eval "`setcfg "$mcfgdir/module.cfg" 0`"
 
 	for xt in git curl; do
@@ -63,57 +85,124 @@ fetch_submodule()
 		eval "$_seval; then st=\"\$st \$xt\"; fi"
 	done
 
-	st="${st# }" && [ "$st" = "git curl" ] && \
-	    err "$mdir: git+curl defined" fetch_submodule "$@"
-	[ -z "$st" ] && return 0 # subgit/subcurl not defined
-	chkvars "sub${st}" "sub${st}_bkup" "subhash"
+	st="${st# }"
+	if [ "$st" = "git curl" ]; then
+		err "$mdir: git+curl defined" "fetch_submodule" "$@"
+	fi
+
+	if [ -n "$st" ]
+	then
+		chkvars "sub${st}" "sub${st}_bkup" "subhash"
 
-	[ "$st" = "git" ] && x_ rm -Rf "$tmpgit/$1"
-	eval xbget "$st" "\$sub$st" "\$sub${st}_bkup" "$tmpgit/$1" \
-	    "$subhash" "$mdir/${1##*/}/patches"
+		if [ "$st" = "git" ]; then
+			x_ rm -Rf "$tmpgit/$1"
+		fi
+
+		eval xbget "$st" "\$sub$st" "\$sub${st}_bkup" "$tmpgit/$1" \
+		    "$subhash" "$mdir/${1##*/}/patches"
+	fi
 }
 
+# TODO: in the following functions, argument numbers are used
+#       which is hard to understand. the code should be modified
+#       so that variable names are used instead, for easy reading
+
 xbget()
 {
-	[ "$1" = "curl" ] || [ "$1" = "copy" ] || [ "$1" = "git" ] || \
-	    err "Bad dlop (arg 1)" xbget "$@"
+	if [ "$1" != "curl" ] && [ "$1" != "copy" ] && [ "$1" != "git" ]; then
+		err "Bad dlop (arg 1)" "xbget" "$@"
+	fi
+
+	for url in "$2" "$3"
+	do
+		if [ -z "$url" ]; then
+			err "empty URL given in" "xbget" "$@"
+		fi
+
+		if ! try_file "$url" "$@"; then
+			continue
+		fi
 
-	for url in "$2" "$3"; do
-		[ -n "$url" ] || err "empty URL given in: xbget $*"
-		try_file "$url" "$@" || continue
 		case "$1" in
-		git) [ -d "$4" ] || continue ;;
-		*) [ -f "$4" ] || continue ;;
+		git)
+			if [ ! -d "$4" ]; then
+				continue
+			fi
+			;;
+		*)
+			if [ ! -f "$4" ]; then
+				continue
+			fi
+			;;
 		esac
 		return 0 # successful download/copy
 	done
-	err "failed to download file/repository" xbget "$@"; :
+
+	err "failed to download file/repository" "xbget" "$@"; :
 }
 
+# TODO: this function "try_file" actually handles git as well.
+#       the name is misleading. think of a better name instead.
+# TODO: try_file is also a bit messy. those eval statements can
+#       be tidied up, or eval can be dropped entirely.
+# (it works much better than the old code, but it's over-engineered)
+
 try_file()
 {
-	cached="file/$6" && [ "$2" = "git" ] && cached="clone/${3##*/}" && \
-	    cached="${cached%.git}" # always the main repo as basis for naming,
-					# in case the backup has another name
+	cached="file/$6"
+	if [ "$2" = "git" ]
+	then
+		# always the main repo as basis for naming,
+		# in case the backup has another name
+
+		cached="clone/${3##*/}"
+		cached="${cached%.git}"
+	fi
 	cached="$XBMK_CACHE/$cached"
+
 	x_ mkdir -p "${5%/*}" "${cached%/*}"
 
-	echk="d" && [ "$2" != "git" ] && echk="f" && \
-	    bad_checksum "$6" "$cached" 2>/dev/null && x_ rm -f "$cached"
+	echk="d"
+	if [ "$2" != "git" ]; then
+		echk="f"
+		if bad_checksum "$6" "$cached" 2>/dev/null; then
+			x_ rm -f "$cached"
+		fi
+	fi
+
+	evalchk="[ -$echk \"$cached\" ] || "
+	if [ "$2" = "git" ]; then
+		evalchk=""
+	fi
 
-	evalchk="[ -$echk \"$cached\" ] || " && [ "$2" = "git" ] && evalchk=""
 	eval "${evalchk}try_$2 \"\$cached\" \"\$@\" || return 1"
-	[ "$2" != "git" ] && [ -f "$5" ] && \
-	    bad_checksum "$6" "$5" 2>/dev/null && x_ cp "$cached" "$5"
+
+	if [ "$2" != "git" ] && [ -f "$5" ]; then
+		if bad_checksum "$6" "$5" 2>/dev/null; then
+			x_ cp "$cached" "$5"
+		fi
+	fi
+
 	eval "[ -$echk \"$cached\" ] || return 1"
 
-	if [ "$2" = "git" ]; then
-		[ -d "$5" ] || tmpclone "$cached" "$5" "$6" "$7" || \
-		    err "Can't clone final repo" try_file "$@"; :
+	if [ "$2" = "git" ]
+	then
+		if [ ! -d "$5" ]; then
+			tmpclone "$cached" "$5" "$6" "$7" || \
+			    err "Can't clone final repo" "try_file" "$@"; :
+		fi
 	else
-		bad_checksum "$6" "$cached" && x_ rm -f "$cached" && return 1
-		[ "$cached" != "$5" ] && x_ cp "$cached" "$5"
-		bad_checksum "$6" "$5" && x_ rm -f "$5" && return 1; :
+		if bad_checksum "$6" "$cached"; then
+			x_ rm -f "$cached"
+			return 1
+		fi
+		if [ "$cached" != "$5" ]; then
+			x_ cp "$cached" "$5"
+		fi
+		if bad_checksum "$6" "$5"; then
+			x_ rm -f "$5"
+			return 1
+		fi
 	fi
 
 	eval "[ -$echk \"$5\" ] || return 1"
@@ -122,13 +211,23 @@ try_file()
 try_curl()
 {
 	_ua="Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0"
-	( x_ curl --location --retry 3 -A "$_ua" "$2" -o "$1" ) || \
-	    ( x_ wget --tries 3 -U "$_ua" "$2" -O "$1" ) || return 1; :
+
+	( x_ curl --location --retry 3 -A "$_ua" "$2" -o "$1" ) \
+	    || ( x_ wget --tries 3 -U "$_ua" "$2" -O "$1" ) \
+	    || return 1; :
 }
 
 try_copy()
 {
-	e "$2" f missing && return 1; :
+	if e "$2" f missing
+	then
+		# TODO: is this if statement necessary? the following
+		#       x_ cp command would provide the same effective
+		#       error handle, and provide equivalent feedback
+
+		return 1
+	fi
+
 	( x_ cp "$2" "$1" ) || return 1; :
 }
 
@@ -136,26 +235,40 @@ try_git()
 {
 	gitdest="`findpath "$1" || err "Can't get findpath for '$1'"`" || \
 	    err "failed findpath for '$1'" try_get "$@"
+
 	x_ rm -Rf "$tmpgitcache"
 
-	[ -d "$gitdest" ] || ( x_ git clone "$2" "$tmpgitcache" ) || return 1
-	[ -d "$gitdest" ] || x_ mkdir -p "${gitdest%/*}"
-	[ -d "$gitdest" ] || x_ mv "$tmpgitcache" "$gitdest"
+	if [ ! -d "$gitdest" ]; then
+		( x_ git clone "$2" "$tmpgitcache" ) || return 1
+
+		x_ mkdir -p "${gitdest%/*}"
+		x_ mv "$tmpgitcache" "$gitdest"
+	fi
 
 	( x_ git -C "$gitdest" remote remove main ) || :
 	( x_ git -C "$gitdest" remote remove backup ) || :
+
 	x_ git -C "$gitdest" remote add main "$4"
 	x_ git -C "$gitdest" remote add backup "$5"
+
 	( x_ git -C "$gitdest" pull --all ) || :; :
 }
 
 bad_checksum()
 {
-	e "$2" f missing && return 0
+	if e "$2" f missing; then
+		return 0
+	fi
+
 	csum="$(x_ sha512sum "$2" | awk '{print $1}')" || \
 	    err "!sha512 '$2' $1" bad_checksum "$@"
-	[ "$csum" = "$1" ] && return 1; x_ rm -f "$2"
-	printf "BAD SHA512 %s, '%s'; need '%s'\n" "$csum" "$2" "$1" 1>&2
+
+	if [ "$csum" = "$1" ]; then
+		return 1
+	else
+		x_ rm -f "$2"
+		printf "BAD SHA512 %s, '%s'; need %s\n" "$csum" "$2" "$1" 1>&2
+	fi
 }
 
 tmpclone()