coreboot/default: Re-base all patches

There were a lot of unnecessary patches, such as the VRAM
patches; as Nicholas Chin has explained to me, the drivers
for these machines will just allocate what RAM they want
anyway, so in a lot of cases the extra allocated Video RAM
simply reduces the total amount of memory for other uses.

In general, we have a lot of patches that have existed for
years. A much more aggressive sweep will be done in the next
major audit, especially when the revisions are updated again.

Signed-off-by: Leah Rowe <leah@libreboot.org>

1 files changed, 0 insertions, 476 deletions

diff --git a/config/coreboot/default/patches/0059-haswell-NRI-Do-sense-amplifier-offset-training.patch b/config/coreboot/default/patches/0059-haswell-NRI-Do-sense-amplifier-offset-training.patch
deleted file mode 100644
index 0310e671..00000000
--- a/config/coreboot/default/patches/0059-haswell-NRI-Do-sense-amplifier-offset-training.patch
+++ /dev/null
@@ -1,476 +0,0 @@
-From c22e06a8ef87f74cc9955ffc259e7052742269c4 Mon Sep 17 00:00:00 2001
-From: Angel Pons <th3fanbus@gmail.com>
-Date: Wed, 17 Apr 2024 13:20:32 +0200
-Subject: [PATCH 59/65] haswell NRI: Do sense amplifier offset training
-
-Quoting Wikipedia:
-
-  A sense amplifier is a circuit that is used to amplify and detect
-  small signals in electronic systems. It is commonly used in memory
-  circuits, such as dynamic random access memory (DRAM), to read and
-  amplify the weak signals stored in memory cells.
-
-In this case, we're calibrating the sense amplifiers in the memory
-controller. This training procedure uses a magic "sense amp offset
-cancel" mode of the DDRIO to observe the sampled logic levels, and
-sweeps Vref to find the low-high transition for each bit lane. The
-procedure consists of two stages: the first stage centers per-byte
-Vref (to ensure per-bit Vref offsets are as small as possible) and
-the second stage centers per-bit Vref.
-
-Because this procedure uses the "sense amp offset cancel" mode, it
-does not rely on DRAM being trained. It is assumed that the memory
-controller simply makes sense amp output levels observable via the
-`DDR_DATA_TRAIN_FEEDBACK` register and that the memory bus is idle
-during this training step (so the lane voltage is Vdd / 2).
-
-Note: This procedure will need to be adapted for Broadwell because
-it has per-rank per-bit RxVref registers, whereas Haswell only has
-a single per-bit RxVref register for all ranks.
-
-Change-Id: Ia07db68763f90e9701c8a376e01279ada8dbbe07
-Signed-off-by: Angel Pons <th3fanbus@gmail.com>
----
- .../intel/haswell/native_raminit/Makefile.mk  |   1 +
- .../haswell/native_raminit/raminit_main.c     |   1 +
- .../haswell/native_raminit/raminit_native.h   |  12 +
- .../native_raminit/train_sense_amp_offset.c   | 341 ++++++++++++++++++
- .../intel/haswell/registers/mchbar.h          |   2 +
- 5 files changed, 357 insertions(+)
- create mode 100644 src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c
-
-diff --git a/src/northbridge/intel/haswell/native_raminit/Makefile.mk b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-index 8fdd17c542..4bd668a2d6 100644
---- a/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-+++ b/src/northbridge/intel/haswell/native_raminit/Makefile.mk
-@@ -21,3 +21,4 @@ romstage-y += timings_refresh.c
- romstage-y += train_jedec_write_leveling.c
- romstage-y += train_read_mpr.c
- romstage-y += train_receive_enable.c
-+romstage-y += train_sense_amp_offset.c
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_main.c b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-index 056dde1adc..ce637e2d03 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_main.c
-@@ -60,6 +60,7 @@ static const struct task_entry cold_boot[] = {
- 	{ configure_memory_map,                                   true, "MEMMAP",     },
- 	{ do_jedec_init,                                          true, "JEDECINIT",  },
- 	{ pre_training,                                           true, "PRETRAIN",   },
-+	{ train_sense_amp_offset,                                 true, "SOT",        },
- 	{ train_receive_enable,                                   true, "RCVET",      },
- 	{ train_read_mpr,                                         true, "RDMPRT",     },
- 	{ train_jedec_write_leveling,                             true, "JWRL",       },
-diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.h b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-index 2ac16eaad3..07eea98831 100644
---- a/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.h
-@@ -23,6 +23,8 @@
- #define NUM_LANES		9
- #define NUM_LANES_NO_ECC	8
- 
-+#define NUM_BITS		8
-+
- #define COMP_INT		10
- 
- /* Always use 12 legs for emphasis (not trained) */
-@@ -219,6 +221,7 @@ enum raminit_status {
- 	RAMINIT_STATUS_MPLL_INIT_FAILURE,
- 	RAMINIT_STATUS_POLL_TIMEOUT,
- 	RAMINIT_STATUS_REUT_ERROR,
-+	RAMINIT_STATUS_SAMP_OFFSET_FAILURE,
- 	RAMINIT_STATUS_RCVEN_FAILURE,
- 	RAMINIT_STATUS_RMPR_FAILURE,
- 	RAMINIT_STATUS_JWRL_FAILURE,
-@@ -244,6 +247,12 @@ struct raminit_dimm_info {
- 	bool valid;
- };
- 
-+struct vref_margin {
-+	uint8_t low;
-+	uint8_t center;
-+	uint8_t high;
-+};
-+
- struct sysinfo {
- 	enum raminit_boot_mode bootmode;
- 	enum generic_stepping stepping;
-@@ -331,6 +340,8 @@ struct sysinfo {
- 	uint8_t rxdqsn[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES];
- 	int8_t  rxvref[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES];
- 
-+	struct vref_margin rxdqvrefpb[NUM_CHANNELS][NUM_SLOTRANKS][NUM_LANES][NUM_BITS];
-+
- 	uint8_t clk_pi_code[NUM_CHANNELS][NUM_SLOTRANKS];
- 	uint8_t ctl_pi_code[NUM_CHANNELS][NUM_SLOTRANKS];
- 	uint8_t cke_pi_code[NUM_CHANNELS][NUM_SLOTRANKS];
-@@ -453,6 +464,7 @@ enum raminit_status convert_timings(struct sysinfo *ctrl);
- enum raminit_status configure_mc(struct sysinfo *ctrl);
- enum raminit_status configure_memory_map(struct sysinfo *ctrl);
- enum raminit_status do_jedec_init(struct sysinfo *ctrl);
-+enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl);
- enum raminit_status train_receive_enable(struct sysinfo *ctrl);
- enum raminit_status train_read_mpr(struct sysinfo *ctrl);
- enum raminit_status train_jedec_write_leveling(struct sysinfo *ctrl);
-diff --git a/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c
-new file mode 100644
-index 0000000000..d4f199fefb
---- /dev/null
-+++ b/src/northbridge/intel/haswell/native_raminit/train_sense_amp_offset.c
-@@ -0,0 +1,341 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+
-+#include <assert.h>
-+#include <commonlib/bsd/clamp.h>
-+#include <console/console.h>
-+#include <delay.h>
-+#include <lib.h>
-+#include <types.h>
-+
-+#include "raminit_native.h"
-+
-+#define VREF_OFFSET_PLOT	RAM_DEBUG
-+#define SAMP_OFFSET_PLOT	RAM_DEBUG
-+
-+struct vref_train_data {
-+	int8_t best_sum;
-+	int8_t best_vref;
-+	int8_t sum_bits;
-+	uint8_t high_mask;
-+	uint8_t low_mask;
-+};
-+
-+static enum raminit_status train_vref_offset(struct sysinfo *ctrl)
-+{
-+	const int8_t vref_start = -15;
-+	const int8_t vref_stop  = 15;
-+	const struct vref_train_data initial_vref_values = {
-+		.best_sum  = -NUM_LANES,
-+		.best_vref = 0,
-+		.high_mask = 0,
-+		.low_mask  = 0xff,
-+	};
-+	struct vref_train_data vref_data[NUM_CHANNELS][NUM_LANES];
-+
-+	printk(VREF_OFFSET_PLOT, "Plot of sum_bits across Vref settings\nChannel");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(VREF_OFFSET_PLOT, "\t%u\t\t", channel);
-+	}
-+
-+	printk(VREF_OFFSET_PLOT, "\nByte");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(VREF_OFFSET_PLOT, "\t");
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			printk(VREF_OFFSET_PLOT, "%u ", byte);
-+			vref_data[channel][byte] = initial_vref_values;
-+			union ddr_data_control_2_reg data_control_2 = {
-+				.raw = ctrl->dq_control_2[channel][byte],
-+			};
-+			data_control_2.force_bias_on = 1;
-+			data_control_2.force_rx_on   = 1;
-+			mchbar_write32(DQ_CONTROL_2(channel, byte), data_control_2.raw);
-+		}
-+	}
-+
-+	/* Sweep through Vref settings and find point SampOffset of +/- 7 passes */
-+	printk(VREF_OFFSET_PLOT, "\n1/2 Vref");
-+	for (int8_t vref = vref_start; vref <= vref_stop; vref++) {
-+		printk(VREF_OFFSET_PLOT, "\n% 3d", vref);
-+
-+		/*
-+		 * To perform this test, enable offset cancel mode and enable ODT.
-+		 * Check results and update variables. Ideal result is all zeroes.
-+		 * Clear offset cancel mode at end of test to write RX_OFFSET_VDQ.
-+		 */
-+		change_1d_margin_multicast(ctrl, RdV, vref, 0, false, REG_FILE_USE_RANK);
-+
-+		/* Program settings for Vref and SampOffset = 7 (8 + 7) */
-+		mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0xffffffff);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			/* Propagate delay values (without a read command) */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.read_rf_rd      = 1;
-+			data_control_0.read_rf_wr      = 0;
-+			data_control_0.read_rf_rank    = 0;
-+			data_control_0.force_odt_on    = 1;
-+			data_control_0.samp_train_mode = 1;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			udelay(1);
-+			data_control_0.samp_train_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				const uint8_t feedback = get_data_train_feedback(channel, byte);
-+				struct vref_train_data *curr_data = &vref_data[channel][byte];
-+				curr_data->low_mask &= feedback;
-+				curr_data->sum_bits = -popcnt(feedback);
-+			}
-+		}
-+
-+		/* Program settings for Vref and SampOffset = -7 (8 - 7) */
-+		mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, 0x11111111);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			/* Propagate delay values (without a read command) */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.read_rf_rd      = 1;
-+			data_control_0.read_rf_wr      = 0;
-+			data_control_0.read_rf_rank    = 0;
-+			data_control_0.force_odt_on    = 1;
-+			data_control_0.samp_train_mode = 1;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			udelay(1);
-+			data_control_0.samp_train_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			printk(VREF_OFFSET_PLOT, "\t");
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				const uint8_t feedback = get_data_train_feedback(channel, byte);
-+				struct vref_train_data *curr_data = &vref_data[channel][byte];
-+				curr_data->high_mask |= feedback;
-+				curr_data->sum_bits += popcnt(feedback);
-+				printk(VREF_OFFSET_PLOT, "%d ", curr_data->sum_bits);
-+				if (curr_data->sum_bits > curr_data->best_sum) {
-+					curr_data->best_sum  = curr_data->sum_bits;
-+					curr_data->best_vref = vref;
-+					ctrl->rxvref[channel][0][byte] = vref;
-+				} else if (curr_data->sum_bits == curr_data->best_sum) {
-+					curr_data->best_vref = vref;
-+				}
-+			}
-+		}
-+	}
-+	printk(BIOS_DEBUG, "\n\nHi-Lo (XOR):");
-+	enum raminit_status status = RAMINIT_STATUS_SUCCESS;
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(BIOS_DEBUG, "\n  C%u:", channel);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			struct vref_train_data *const curr_data = &vref_data[channel][byte];
-+			const uint8_t bit_xor = curr_data->high_mask ^ curr_data->low_mask;
-+			printk(BIOS_DEBUG, "\t0x%02x", bit_xor);
-+			if (bit_xor == 0xff)
-+				continue;
-+
-+			/* Report an error if any bit did not change */
-+			status = RAMINIT_STATUS_SAMP_OFFSET_FAILURE;
-+		}
-+	}
-+	if (status)
-+		printk(BIOS_ERR, "\nUnexpected bit error in Vref offset training\n");
-+
-+	printk(BIOS_DEBUG, "\n\nRdVref:");
-+	change_1d_margin_multicast(ctrl, RdV, 0, 0, false, REG_FILE_USE_RANK);
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(BIOS_DEBUG, "\n  C%u:", channel);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			struct vref_train_data *const curr_data = &vref_data[channel][byte];
-+			const int8_t vref_width =
-+				curr_data->best_vref - ctrl->rxvref[channel][0][byte];
-+
-+			/*
-+			 * Step size for Rx Vref in DATA_OFFSET_TRAIN is about 3.9 mV
-+			 * whereas Rx Vref step size in RX_TRAIN_RANK is about 7.8 mV
-+			 */
-+			int8_t vref = ctrl->rxvref[channel][0][byte] + vref_width / 2;
-+			if (vref < 0)
-+				vref--;
-+			else
-+				vref++;
-+
-+			for (uint8_t rank = 0; rank < NUM_SLOTRANKS; rank++) {
-+				if (!rank_in_ch(ctrl, rank, channel))
-+					continue;
-+
-+				ctrl->rxvref[channel][rank][byte] = vref / 2;
-+				update_rxt(ctrl, channel, rank, byte, RXT_RESTORE, 0);
-+			}
-+			printk(BIOS_DEBUG, "\t% 4d", ctrl->rxvref[channel][0][byte]);
-+		}
-+	}
-+	printk(BIOS_DEBUG, "\n\n");
-+	return status;
-+}
-+
-+/**
-+ * LPDDR has an additional bit for DQS per each byte.
-+ *
-+ * TODO: The DQS value must be written into Data Control 2.
-+ */
-+#define NUM_OFFSET_TRAIN_BITS	(NUM_BITS + 1)
-+
-+#define PLOT_CH_SPACE		"  "
-+
-+struct samp_train_data {
-+	uint8_t first_zero;
-+	uint8_t last_one;
-+};
-+
-+static void train_samp_offset(struct sysinfo *ctrl)
-+{
-+	const uint8_t max_train_bits = ctrl->lpddr ? NUM_OFFSET_TRAIN_BITS : NUM_BITS;
-+
-+	struct samp_train_data samp_data[NUM_CHANNELS][NUM_LANES][NUM_OFFSET_TRAIN_BITS] = {0};
-+
-+	printk(BIOS_DEBUG, "Channel ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		printk(BIOS_DEBUG, "%u ", channel); /* Same length as PLOT_CH_SPACE */
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			printk(BIOS_DEBUG, "        %s ", ctrl->lpddr ? " " : "");
-+	}
-+	printk(BIOS_DEBUG, "\nByte    ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			printk(BIOS_DEBUG, "%u       %s ", byte, ctrl->lpddr ? " " : "");
-+
-+		printk(BIOS_DEBUG, PLOT_CH_SPACE);
-+	}
-+	printk(SAMP_OFFSET_PLOT, "\nBits    ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			printk(SAMP_OFFSET_PLOT, "01234567%s ", ctrl->lpddr ? "S" : "");
-+
-+		printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE);
-+	}
-+	printk(SAMP_OFFSET_PLOT, "\n SAmp\n");
-+	for (uint8_t samp_offset = 1; samp_offset <= 15; samp_offset++) {
-+		printk(SAMP_OFFSET_PLOT, "% 5d\t", samp_offset);
-+
-+		uint32_t rx_offset_vdq = 0;
-+		for (uint8_t bit = 0; bit < NUM_BITS; bit++) {
-+			rx_offset_vdq += samp_offset << (4 * bit);
-+		}
-+		mchbar_write32(DDR_DATA_RX_OFFSET_VDQ, rx_offset_vdq);
-+		for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+			if (!does_ch_exist(ctrl, channel))
-+				continue;
-+
-+			/* Propagate delay values (without a read command) */
-+			union ddr_data_control_0_reg data_control_0 = {
-+				.raw = ctrl->dq_control_0[channel],
-+			};
-+			data_control_0.read_rf_rd      = 1;
-+			data_control_0.read_rf_wr      = 0;
-+			data_control_0.read_rf_rank    = 0;
-+			data_control_0.force_odt_on    = 1;
-+			data_control_0.samp_train_mode = 1;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+			udelay(1);
-+			for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+				const uint32_t feedback =
-+					get_data_train_feedback(channel, byte);
-+
-+				for (uint8_t bit = 0; bit < max_train_bits; bit++) {
-+					struct samp_train_data *const curr_data =
-+							&samp_data[channel][byte][bit];
-+					const bool result = feedback & BIT(bit);
-+					if (result) {
-+						curr_data->last_one = samp_offset;
-+					} else if (curr_data->first_zero == 0) {
-+						curr_data->first_zero = samp_offset;
-+					}
-+					printk(SAMP_OFFSET_PLOT, result ? "." : "#");
-+				}
-+				printk(SAMP_OFFSET_PLOT, " ");
-+			}
-+			printk(SAMP_OFFSET_PLOT, PLOT_CH_SPACE);
-+			data_control_0.samp_train_mode = 0;
-+			mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), data_control_0.raw);
-+		}
-+		printk(SAMP_OFFSET_PLOT, "\n");
-+	}
-+	printk(BIOS_DEBUG, "\nBitSAmp ");
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++) {
-+			uint32_t rx_offset_vdq = 0;
-+			for (uint8_t bit = 0; bit < max_train_bits; bit++) {
-+				struct samp_train_data *const curr_data =
-+						&samp_data[channel][byte][bit];
-+
-+				uint8_t vref = curr_data->first_zero + curr_data->last_one;
-+				vref = clamp_u8(0, vref / 2, 15);
-+				/*
-+				 * Check for saturation conditions to make sure
-+				 * we are as close as possible to Vdd/2 (750 mV).
-+				 */
-+				if (curr_data->first_zero == 0)
-+					vref = 15;
-+				if (curr_data->last_one == 0)
-+					vref = 0;
-+
-+				ctrl->rxdqvrefpb[channel][0][byte][bit].center = vref;
-+				rx_offset_vdq += vref & 0xf << (4 * bit);
-+				printk(BIOS_DEBUG, "%x", vref);
-+			}
-+			mchbar_write32(RX_OFFSET_VDQ(channel, byte), rx_offset_vdq);
-+			printk(BIOS_DEBUG, " ");
-+			download_regfile(ctrl, channel, 1, 0, REG_FILE_USE_RANK, 0, 1, 0);
-+		}
-+		printk(BIOS_DEBUG, PLOT_CH_SPACE);
-+	}
-+	printk(BIOS_DEBUG, "\n");
-+}
-+
-+enum raminit_status train_sense_amp_offset(struct sysinfo *ctrl)
-+{
-+	printk(BIOS_DEBUG, "Stage 1: Vref offset training\n");
-+	const enum raminit_status status = train_vref_offset(ctrl);
-+
-+	printk(BIOS_DEBUG, "Stage 2: Samp offset training\n");
-+	train_samp_offset(ctrl);
-+
-+	/* Clean up after test */
-+	for (uint8_t channel = 0; channel < NUM_CHANNELS; channel++) {
-+		if (!does_ch_exist(ctrl, channel))
-+			continue;
-+
-+		mchbar_write32(DDR_DATA_ch_CONTROL_0(channel), ctrl->dq_control_0[channel]);
-+		for (uint8_t byte = 0; byte < ctrl->lanes; byte++)
-+			mchbar_write32(DQ_CONTROL_2(channel, byte),
-+				ctrl->dq_control_2[channel][byte]);
-+	}
-+	io_reset();
-+	return status;
-+}
-diff --git a/src/northbridge/intel/haswell/registers/mchbar.h b/src/northbridge/intel/haswell/registers/mchbar.h
-index 49a215aa71..1a168a3fc8 100644
---- a/src/northbridge/intel/haswell/registers/mchbar.h
-+++ b/src/northbridge/intel/haswell/registers/mchbar.h
-@@ -18,6 +18,8 @@
- #define RX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0000, ch, rank, byte)
- #define TX_TRAIN_ch_r_b(ch, rank, byte)		_DDRIO_C_R_B(0x0020, ch, rank, byte)
- 
-+#define RX_OFFSET_VDQ(ch, byte)			_DDRIO_C_R_B(0x004c, ch, 0, byte)
-+
- #define DDR_DATA_TRAIN_FEEDBACK(ch, byte)	_DDRIO_C_R_B(0x0054, ch, 0, byte)
- 
- #define DQ_CONTROL_1(ch, byte)			_DDRIO_C_R_B(0x0060, ch, 0, byte)
--- 
-2.39.5
-