SeaBIOS/default: Bump to rev b686f460, 28 Jun 2025

This brings in the following changes:

* b686f460 sercon: Fix keycodes for F11 and F12
* b52ca86e docs: Note v1.17.0 release
* a6c8e8bb ahci: Fix hangs due to controller reset

The serial console fix is useful to us, as is the AHCI
fix; the latter was previously mitigated by removing
SeaBIOS's AHCI reset patch.

Upstream realised that the AHCI controllers need to have
a timeout on them when resetting them, because they don't
always react immediately to commands.

This makes the AHCI behaviour more correct, in SeaBIOS.

Signed-off-by: Leah Rowe <leah@libreboot.org>

2 files changed, 1 insertions, 64 deletions

diff --git a/config/seabios/default/patches/0004-ahci-Only-reset-controller-on-CSM.patch b/config/seabios/default/patches/0004-ahci-Only-reset-controller-on-CSM.patch
deleted file mode 100644
index 43f2b8a9..00000000
--- a/config/seabios/default/patches/0004-ahci-Only-reset-controller-on-CSM.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 5fe2215bc5196d836b54e1e5fb00b63fa096fda7 Mon Sep 17 00:00:00 2001
-From: Leah Rowe <leah@libreboot.org>
-Date: Thu, 1 May 2025 15:46:54 +0100
-Subject: [PATCH 4/4] ahci: Only reset controller on CSM
-
-Please refer to this commit:
-
-commit 8863cbbd15a73b03153553c562f5b1fb939ad4d7
-Author: Gerd Hoffmann <kraxel@redhat.com>
-Date:   Thu Feb 6 12:10:21 2025 +0100
-
-    ahci: add controller reset
-
-This commit broke AHCI init on the Lenovo ThinkPad T420,
-when tested with SeaBIOS as a coreboot payload.
-
-Since the above commit was made with CSMs in mind, to make
-the AHCI driver work there, that change has been re-worked
-so as to only apply when a CSM is in use.
-
-Signed-off-by: Leah Rowe <leah@libreboot.org>
----
- src/hw/ahci.c | 17 ++++++++++++++---
- 1 file changed, 14 insertions(+), 3 deletions(-)
-
-diff --git a/src/hw/ahci.c b/src/hw/ahci.c
-index 2285d33d..b09b198a 100644
---- a/src/hw/ahci.c
-+++ b/src/hw/ahci.c
-@@ -637,7 +637,7 @@ static void
- ahci_controller_setup(struct pci_device *pci)
- {
-     struct ahci_port_s *port;
--    u32 pnr, max;
-+    u32 val, pnr, max;
- 
-     if (create_bounce_buf() < 0)
-         return;
-@@ -660,8 +660,19 @@ ahci_controller_setup(struct pci_device *pci)
- 
-     pci_enable_busmaster(pci);
- 
--    ahci_ctrl_writel(ctrl, HOST_CTL, HOST_CTL_RESET);
--    ahci_ctrl_writel(ctrl, HOST_CTL, HOST_CTL_AHCI_EN);
-+    /* AHCI controller reset, but only for CSM. Commit 8863cbbd
-+       introduced this universally, to make AHCI drivers work in
-+       CSM mode, but it broke AHCI setup on the ThinkPad T420 when
-+       SeaBIOS is used as a coreboot payload, hence the else clause: */
-+    if (CONFIG_CSM) {
-+        /* Enable AHCI controller after resetting its state */
-+        ahci_ctrl_writel(ctrl, HOST_CTL, HOST_CTL_RESET);
-+        ahci_ctrl_writel(ctrl, HOST_CTL, HOST_CTL_AHCI_EN);
-+    } else {
-+        /* Enable AHCI controller from its current state */
-+        val = ahci_ctrl_readl(ctrl, HOST_CTL);
-+        ahci_ctrl_writel(ctrl, HOST_CTL, val | HOST_CTL_AHCI_EN);
-+    }
- 
-     ctrl->caps = ahci_ctrl_readl(ctrl, HOST_CAP);
-     ctrl->ports = ahci_ctrl_readl(ctrl, HOST_PORTS_IMPL);
--- 
-2.39.5
-
diff --git a/config/seabios/default/target.cfg b/config/seabios/default/target.cfg
index 92b906f2..5058266d 100644
--- a/config/seabios/default/target.cfg
+++ b/config/seabios/default/target.cfg
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
 tree="default"
-rev="9029a010ec413e6c3c0eb52c29c252a5b9a9f774"
+rev="b686f4600792c504f01929f761be473e298de33d"