path: root/script/build/boot/roms_helper

#!/usr/bin/env sh
# SPDX-License-Identifier: GPL-3.0-or-later
# SPDX-FileCopyrightText: 2020,2021,2023 Leah Rowe <leah@libreboot.org>
# SPDX-FileCopyrightText: 2021,2022 Ferass El Hafidi <vitali64pmemail@protonmail.com>
# SPDX-FileCopyrightText: 2022 Caleb La Grange <thonkpeasant@protonmail.com>
# SPDX-FileCopyrightText: 2022 Alper Nebi Yasak <alpernebiyasak@gmail.com>
# SPDX-FileCopyrightText: 2023 Riku Viitanen <riku.viitanen@protonmail.com>

[ "x${DEBUG+set}" = 'xset' ] && set -v
set -u -e

. "include/err.sh"
. "include/boot.sh"

read projectname < projectname

seavgabiosrom="elf/seabios/default/libgfxinit/vgabios.bin"
grub_background="background1280x800.png"
grubelf="elf/grub/grub.elf"
cfgsdir="config/coreboot"
kmapdir="config/grub/keymap"

# Disable all payloads by default.
# target.cfg files have to specifically enable [a] payload(s)
eval "$(setvars "n" payload_grub payload_grub_withseabios payload_seabios \
    payload_seabios_withgrub payload_memtest payload_uboot)"

eval "$(setvars "" romdir cbdir cbfstool cbrom initmode displaymode \
    cbcfg targetdir grub_timeout ubdir blobs_required)"

eval "$(setvars "undefined" grub_scan_disk tree arch uboot_config)"

# main() is in include/boot.sh

handle_targets()
{
	board="${boards%% *}"
	configure_target
	build_dependencies
	build_target
}

configure_target()
{
	targetdir="${cfgsdir}/${board}"

	[ -d "${targetdir}" ] || \
		err "Target not defined: ${board}"
	[ -f "${targetdir}/target.cfg" ] || \
		err "Missing target.cfg for target: ${board}"

	# Override the above defaults using target.cfg
	. "${targetdir}/target.cfg"

	[ "${grub_scan_disk}" = "undefined" ] && \
		grub_scan_disk="both"
	[ "${grub_scan_disk}" != "both" ] && \
	    [ "${grub_scan_disk}" != "ata" ] && \
	    [ "${grub_scan_disk}" != "ahci" ] && \
		grub_scan_disk="both"

	[ "${tree}" = "undefined" ] && \
		err "Target '${board}' defines no tree. Skipping build."
	[ "${arch}" = "undefined" ] && \
		err "Target '${board}' defines no arch. Skipping build."

	[ "${payload_memtest}" != "y" ] && \
		payload_memtest="n"
	[ "${payload_grub_withseabios}" = "y" ] && \
		payload_grub="y"
	if [ "${payload_grub_withseabios}" = "y" ]; then
		payload_seabios="y"
		payload_seabios_withgrub="y"
	fi
	[ "${payload_seabios_withgrub}" = "y" ] && \
		payload_seabios="y"

	# The reverse logic must not be applied. If SeaBIOS-with-GRUB works,
	# that doesn't mean GRUB-withSeaBIOS will. For example, the board
	# might have a graphics card whose vga rom coreboot doesn't execute
	if [ "${payload_grub}" != "y" ] && \
	    [ "${payload_seabios}" != "y" ] && \
	    [ "${payload_uboot}" != "y" ]; then
		for configfile in "${targetdir}/config/"*; do
			[ -e "${configfile}" ] || continue
			err "target '${board}' defines no payload"
		done
	fi

	[ "${payload_uboot}" != "n" ] && [ "${payload_uboot}" != "y" ] && \
		payload_uboot="n"
	[ "${payload_uboot}" = "y" ] && [ "${uboot_config}" = "undefined" ] && \
		uboot_config="default"
	[ "${blobs_required}" != "n" ] && [ "${blobs_required}" != "y" ] && \
		blobs_required="y"

	# Override all payload directives with cmdline args
	[ -z ${_payload} ] && return 0
	printf "setting payload to: %s\n" "${_payload}"
	eval "$(setvars "n" payload_grub payload_memtest payload_seabios \
	    payload_seabios_withgrub payload_uboot payload_grub_withseabios)"
	eval "payload_${_payload}=y"
}

build_dependencies()
{
	romdir="bin/${board}"
	cbdir="coreboot/${board}"
	[ "${board}" = "${tree}" ] || cbdir="coreboot/${tree}"
	cbfstool="cbutils/${tree}/cbfstool"
	cbrom="${cbdir}/build/coreboot.rom"

	./build coreboot utils ${tree} || err "cannot build cbutils/${tree}"

	build_dependency_seabios

	memtest_bin="memtest86plus/build${arch#*_}/memtest.bin"
	[ "${payload_memtest}" != "y" ] || [ -f "${memtest_bin}" ] || \
		./handle make file -b ${memtest_bin%/*} || \
		    err "cannot build memtest86+"

	rm -f "${romdir}"/* || err "cannot: rm -f \"${romdir}\"/*"

	build_dependency_grub
	build_dependency_uboot
}

build_dependency_seabios()
{
	[ "${payload_seabios}" = "y" ] || return 0

	if [ ! -f "${seavgabiosrom}" ] \
	    || [ ! -f elf/seabios/default/libgfxinit/bios.bin.elf ] \
	    || [ ! -f elf/seabios/default/vgarom/bios.bin.elf ] \
	    || [ ! -f elf/seabios/default/normal/bios.bin.elf ]; then
		./handle make config -b seabios || \
		    err "cannot build seabios"
	fi
}

build_dependency_grub()
{
	[ "${payload_grub}" != "y" ] && \
	    [ "${payload_seabios_withgrub}" != "y" ] && return 0

	rebuild_grub="n"
	[ -f "${grubelf}" ] || rebuild_grub="y"
	for keymapfile in "${kmapdir}"/*.gkb; do
		[ "${rebuild_grub}" = "y" ] || break
		[ -f "${keymapfile}" ] || continue

		keymap="${keymapfile##*/}"
		keymap="${keymap%.gkb}"
		[ ! -f "elf/grub/keymap_${keymap}.cfg" ] && \
		    rebuild_grub="y" && break
	done
	[ "${rebuild_grub}" = "y" ] || return 0
	./build grub payload || \
	    err "build_dependency_grub: cannot build grub payload"
}

build_dependency_uboot()
{
	[ "${payload_uboot}" = "y" ] || return 0

	./handle make config -b u-boot ${board} || \
	    err "cannot build u-boot target: ${board}"
	ubdir="elf/u-boot/${board}/${uboot_config}"
	ubootelf="${ubdir}/u-boot.elf"
	[ ! -f "${ubootelf}" ] && [ -f "${ubdir}/u-boot.bin" ] && \
		ubootelf="${ubdir}/u-boot.bin"
	[ -f "${ubootelf}" ] && return 0
	err "Could not find u-boot build for board, ${board}"
}

build_target()
{
	for x in "normal" "vgarom" "libgfxinit"; do
		initmode="${x}"
		hmode="vesafb"
		[ "${initmode}" = "vgarom" ] || hmode="corebootfb"
		modes="${hmode} txtmode"
		[ -z ${_displaymode} ] || modes="${_displaymode}"
		for y in ${modes}; do
			displaymode="${y}"
			[ "${initmode}" = "normal" ] && \
			    [ "$displaymode" != "txtmode" ] && continue
			cbcfg="${targetdir}/config/${initmode}_${displaymode}"
			[ "${initmode}" = "normal" ] && cbcfg="${cbcfg%_*}"
			build_roms "${cbcfg}"
		done
	done
}

# Main ROM building function. This calls all other functions below
build_roms()
{
	cbcfg="${1}"
	[ ! -f "${cbcfg}" ] && \
		printf "'%s' does not exist. Skipping build for %s %s %s\n" \
		    "${cbcfg}" "${board}" "${displaymode}" "${initmode}" \
		    1>&2 && return 0

	./handle make config -b coreboot ${board} || \
	    err "build_roms: cannot build coreboot for target: ${board}"

	_cbrom="elf/coreboot/${board}/${initmode}_${displaymode}"
	[ "${initmode}" = "normal" ] && \
		_cbrom="${_cbrom%_${displaymode}}"
	_cbrom="${_cbrom}/coreboot.rom"
	cbrom="$(mktemp -t coreboot_rom.XXXXXXXXXX)"
	cp "${_cbrom}" "${cbrom}" || \
	    err "build_roms: cannot copy rom"

	[ "${payload_memtest}" != "y" ] || \
		"${cbfstool}" "${cbrom}" add-payload \
		    -f "${memtest_bin}" -n img/memtest -c lzma || \
		    err "build_roms: cannot add img/memtest to coreboot rom"
	[ "${payload_seabios}" = "y" ] && \
		build_seabios_roms
	[ "${payload_grub}" != "y" ] || \
		build_grub_roms "${cbrom}" "grub" || \
		    err "build_roms: build_grub_roms failed"
	[ "${payload_uboot}" = "y" ] || return 0
	build_uboot_roms
}

build_seabios_roms()
{
	if [ "${payload_seabios_withgrub}" = "y" ]; then
		tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)
		cp "${cbrom}" "${tmprom}" || \
		    err "build_seabios_roms: cannot copy to tmprom"
		build_grub_roms "${tmprom}" "seabios_withgrub" || \
		    err "build_roms: cannot build grub roms, seabios w/grub"
		rm -f "${tmprom}" || err "build_roms: can't remove tmprom"
	else
		t=$(mkSeabiosRom "${cbrom}" "fallback/payload") || \
		    err "build_seabios_roms: cannot build tmprom"
		newrom="${romdir}/seabios_${board}_${initmode}_${displaymode}"
		[ "${initmode}" = "normal" ] && newrom="${romdir}/seabios" \
			&& newrom="${newrom}_${board}_${initmode}"
		moverom "${t}" "${newrom}.rom" || \
		    err "build_roms: cannot copy rom"
		rm -f "${t}" || err "cannot rm ${t}"
	fi

}

# Make separate ROM images with GRUB payload, for each supported keymap
build_grub_roms() {
	tmprom="${1}"
	payload1="${2}" # allow values: grub, seabios, seabios_withgrub
	grub_cbfs="fallback/payload"

	if [ "${payload_grub_withseabios}" = "y" ] && \
	    [ "${payload1}" = "grub" ]; then
		mv "$(mkSeabiosRom "${tmprom}" "seabios.elf")" "${tmprom}" || \
		    err "build_grub_roms: cannot move tmp rom (seabios.elf)"
	elif [ "${payload_seabios_withgrub}" = "y" ] && \
	    [ "${payload1}" != "grub" ]; then
		mv "$(mkSeabiosRom "${tmprom}" fallback/payload)" "${tmprom}" \
		    || err "build_grub_roms: cannot move SeaBIOS ROM to tmprom"
		grub_cbfs="img/grub2"
	fi

	# we only need insert grub.elf once, for each coreboot config:
	"${cbfstool}" "${tmprom}" add-payload -f "${grubelf}" -n ${grub_cbfs} \
	    -c lzma || err "build_grub_roms: cannot add grub payload to tmprom"

	# we only need insert background.png once, for each coreboot config:
	if [ "${displaymode}" = "vesafb" ] || \
	    [ "${displaymode}" = "corebootfb" ]; then
		backgroundfile="config/grub/background/${grub_background}"
		"${cbfstool}" "${tmprom}" add -f ${backgroundfile} \
		    -n background.png -t raw || \
		    err "build_grub_roms: cannot add background.png to tmprom"

	fi

	tmpcfg=$(mktemp -t coreboot_rom.XXXXXXXXXX) || 
	    err "build_grub_roms: cannot create temporary scan.cfg"
	printf "set grub_scan_disk=\"%s\"\n" "${grub_scan_disk}" > \
	    "${tmpcfg}" || err "build_grub_roms: cannot create scan.cfg"
	[ "${grub_scan_disk}" = "both" ] || \
		"${cbfstool}" "${tmprom}" add -f "${tmpcfg}" -n scan.cfg -t \
		    raw || err "build_grub_roms: can't insert scan.cfg"
	printf "set timeout=%s\n" "${grub_timeout}" > "${tmpcfg}" || \
	    err "build_grub_roms: can't create timeout.cfg"
	[ -z "${grub_timeout}" ] || \
		"${cbfstool}" "${tmprom}" add -f "${tmpcfg}" -n timeout.cfg \
		    -t raw || err "build_grub_roms: can't insert timeout.cfg"
	rm -f "${tmpcfg}" || err "build_grub_roms: can't delete tmpcfg"

	keymaps=""
	for kmapfile in "${kmapdir}"/*; do
		keymaps="${keymaps} ${kmapfile}"
	done
	[ -z ${_keyboard} ] || keymaps="${kmapdir}/${_keyboard}.gkb"

	for keymapfile in ${keymaps}; do
		[ -f "${keymapfile}" ] || continue
		keymap="${keymapfile##*/}"
		keymap="${keymap%.gkb}"
		tmpgrubrom="$(mkGrubRom "${keymap}" "${tmprom}")"

		newrom="${romdir}/${payload1}_${board}_${initmode}_"
		newrom="${newrom}${displaymode}_${keymap}.rom"
		[ "${initmode}" = "normal" ] && \
			newrom="${romdir}/${payload1}_${board}_" && \
			newrom="${newrom}${initmode}_${keymap}.rom"
		moverom "${tmpgrubrom}" "${newrom}" || \
		    err "build_grub_roms, moverom"
		rm -f "${tmpgrubrom}" || err "rm tmpgrubrom, build_grub_roms"
	done
}

# make a rom in /tmp/ and then print the path of that ROM
mkGrubRom() {
	_keymap="${1}"
	_cbrom="${2}"

	keymapcfg="elf/grub/keymap_${_keymap}.cfg"

	tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX) || \
	    err "mkGrubRom: cannot create tmprom"
	cp "${_cbrom}" "${tmprom}" || err "mkGrubRom: cannot copy to tmprom"
	"${cbfstool}" "${tmprom}" add -f "${keymapcfg}" -n keymap.cfg -t raw \
	    || err "mkGrubRom: cannot add keymap.cfg to tmprom"

	printf "%s\n" "${tmprom}"
}

# make a rom in /tmp/ and then print the path of that ROM
mkSeabiosRom() {
	_cbrom="${1}" # rom to insert seabios in. will not be touched
		# (a tmpfile will be made instead)
	_seabios_cbfs_path="${2}" # e.g. fallback/payload
	_seabioself="elf/seabios/default/${initmode}/bios.bin.elf"
	tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)

	cp "${_cbrom}" "${tmprom}" || \
	    err "mkSeabiosRom: cannot copy to tmprom"
	"${cbfstool}" "${tmprom}" add-payload -f "${_seabioself}" \
	    -n ${_seabios_cbfs_path} -c lzma || \
	    err "mkSeabiosRom: can't add payload, ${_seabioself}, to rom"
	"${cbfstool}" "${tmprom}" add-int -i 3000 -n etc/ps2-keyboard-spinup \
	    || err "mkSeabiosRom: cbfs add-int etc/ps2-keyboard-spinup 3000"

	z="2"; [ "${initmode}" = "vgarom" ] && z="0"
	"${cbfstool}" "${tmprom}" add-int -i $z -n etc/pci-optionrom-exec || \
	    err "mkSeabiosRom: cbfs add-int etc/pci-optionrom-exec 0"
	"${cbfstool}" "${tmprom}" add-int -i 0 -n etc/optionroms-checksum || \
	    err "mkSeabiosRom: cbfs add-int etc/optionroms-checksum 0"
	[ "${initmode}" != "libgfxinit" ] || \
		"${cbfstool}" "${tmprom}" add -f "${seavgabiosrom}" \
		    -n vgaroms/seavgabios.bin -t raw || \
		    err "mkSeabiosRom: cbfs add-raw vgaroms/seavgabios.bin"

	printf "%s\n" "${tmprom}"
}

build_uboot_roms()
{
	tmprom="$(mkUbootRom "${cbrom}" "fallback/payload")"
	newrom="${romdir}/uboot_payload_${board}_${initmode}_${displaymode}.rom"
	[ "${initmode}" = "normal" ] && \
		newrom="${romdir}/uboot_payload_${board}_${initmode}.rom"
	moverom "${tmprom}" "${newrom}" || \
	    err "build_roms: moverom fail (u-boot)"
	rm -f "${tmprom}" || err "build_roms: cannot rm u-boot rom"
}

# make a rom in /tmp/ and then print the path of that ROM
mkUbootRom() {
	_cbrom="${1}" # rom to insert u-boot in. it won't be touched
		# (a tmpfile will be made instead)
	_uboot_cbfs_path="${2}" # e.g. fallback/payload

	_ubdir="elf/u-boot/${board}/${uboot_config}"
	_ubootelf="${_ubdir}/u-boot.elf"
	[ -f "${_ubootelf}" ] || _ubootelf="${_ubdir}/u-boot.bin"
	[ -f "${_ubootelf}" ] || err "mkUbootRom: ${board}: cant find u-boot"

	tmprom=$(mktemp -t coreboot_rom.XXXXXXXXXX)

	cp "${_cbrom}" "${tmprom}" || \
	    err "mkUbootRom: cannot copy to tmprom"
	"${cbfstool}" "${tmprom}" add-payload -f "${_ubootelf}" \
	    -n ${_uboot_cbfs_path} -c lzma || \
	    err "mkUbootRom: cannot add u-boot to tmprom"

	printf "%s\n" "${tmprom}"
}

# it is assumed that no other work will be done on the ROM
# after calling this function. therefore this function is "final"
moverom() {
	rompath="${1}"
	newrom="${2}"

	printf "Creating target image: %s\n" "${newrom}"

	[ -d "${newrom%/*}" ] || mkdir -p "${newrom%/*}/" || \
	    err "moverom: cannot create rom directory: \"${newrom%/*}\""
	[ "${blobs_required}" = "n" ] && newrom="${newrom%.rom}_noblobs.rom"
	cp "${rompath}" "${newrom}" || err "moverom: can't copy rom"
}

main $@