1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
|
From 92be49d8422b4bc1c89bb49535f4dc6a01d47295 Mon Sep 17 00:00:00 2001
From: Angel Pons <th3fanbus@gmail.com>
Date: Fri, 6 May 2022 23:22:11 +0200
Subject: [PATCH 06/26] sb/intel/lynxpoint: Add native thermal init
Implement native thermal initialisation for Lynx Point. This is only
needed when MRC.bin is not used.
Change-Id: I4a67a3092d0c2e56bfdacb513a899ef838193cbd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
---
.../haswell/native_raminit/raminit_native.c | 1 +
src/southbridge/intel/lynxpoint/Makefile.inc | 2 +-
src/southbridge/intel/lynxpoint/pch.h | 1 +
src/southbridge/intel/lynxpoint/thermal.c | 64 +++++++++++++++++++
4 files changed, 67 insertions(+), 1 deletion(-)
create mode 100644 src/southbridge/intel/lynxpoint/thermal.c
diff --git a/src/northbridge/intel/haswell/native_raminit/raminit_native.c b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
index ef61d4ee09..dd1f1ec14e 100644
--- a/src/northbridge/intel/haswell/native_raminit/raminit_native.c
+++ b/src/northbridge/intel/haswell/native_raminit/raminit_native.c
@@ -16,6 +16,7 @@ static bool early_init_native(int s3resume)
/** TODO: CPU replacement check must be skipped in warm boots and S3 resumes **/
const bool cpu_replaced = !s3resume && intel_early_me_cpu_replacement_check();
+ early_thermal_init();
early_usb_init();
if (!CONFIG(INTEL_LYNXPOINT_LP))
diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc
index 0e1f2fe4eb..a9a9b153d6 100644
--- a/src/southbridge/intel/lynxpoint/Makefile.inc
+++ b/src/southbridge/intel/lynxpoint/Makefile.inc
@@ -37,7 +37,7 @@ bootblock-y += early_pch.c
romstage-y += early_usb.c early_me.c me_status.c early_pch.c
romstage-y += pmutil.c
-romstage-$(CONFIG_USE_NATIVE_RAMINIT) += early_pch_native.c early_usb_native.c iobp.c
+romstage-$(CONFIG_USE_NATIVE_RAMINIT) += early_pch_native.c early_usb_native.c iobp.c thermal.c
ifeq ($(CONFIG_INTEL_LYNXPOINT_LP),y)
romstage-y += lp_gpio.c
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h
index ad983d86cf..38a9349220 100644
--- a/src/southbridge/intel/lynxpoint/pch.h
+++ b/src/southbridge/intel/lynxpoint/pch.h
@@ -116,6 +116,7 @@ enum pch_platform_type {
void pch_dmi_setup_physical_layer(void);
void pch_dmi_tc_vc_mapping(u32 vc0, u32 vc1, u32 vcp, u32 vcm);
void early_usb_init(void);
+void early_thermal_init(void);
void usb_ehci_sleep_prepare(pci_devfn_t dev, u8 slp_typ);
void usb_ehci_disable(pci_devfn_t dev);
diff --git a/src/southbridge/intel/lynxpoint/thermal.c b/src/southbridge/intel/lynxpoint/thermal.c
new file mode 100644
index 0000000000..e71969ea0c
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/thermal.c
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <device/mmio.h>
+#include <device/pci_ops.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <types.h>
+
+#define TBARB_TEMP 0x40000000
+
+#define THERMAL_DEV PCI_DEV(0, 0x1f, 6)
+
+/* Early thermal init, it may need to be done prior to giving ME its memory */
+void early_thermal_init(void)
+{
+ /* Program address for temporary BAR */
+ pci_write_config32(THERMAL_DEV, 0x40, TBARB_TEMP);
+ pci_write_config32(THERMAL_DEV, 0x44, 0);
+
+ /* Activate temporary BAR */
+ pci_or_config32(THERMAL_DEV, 0x40, 1);
+
+ /*
+ * BWG section 17.3.1 says:
+ *
+ * ### Initializing Lynx Point Thermal Sensors ###
+ *
+ * The System BIOS must perform the following steps to initialize the Lynx
+ * Point thermal subsystem device, D31:F6. The System BIOS is required to
+ * repeat this process on a resume from Sx. BIOS may enable any or all of
+ * the registers below based on OEM's platform configuration. Intel does
+ * not recommend a value on some of the registers, since each platform has
+ * different temperature trip points and one may enable a trip to cause an
+ * SMI while another platform would cause an interrupt instead.
+ *
+ * The recommended flow for enabling thermal sensor is by setting up various
+ * temperature trip points first, followed by enabling the desired trip
+ * alert method and then enable the actual sensors from TSEL registers.
+ * If this flow is not followed, software will need to take special care
+ * to handle false events during setting up those registers.
+ */
+
+ /* Step 1: Program CTT */
+ write16p(TBARB_TEMP + 0x10, 0x0154);
+
+ /* Step 2: Clear trip status from TSS and TAS */
+ write8p(TBARB_TEMP + 0x06, 0xff);
+ write8p(TBARB_TEMP + 0x80, 0xff);
+
+ /* Step 3: Program TSGPEN and TSPIEN to zero */
+ write8p(TBARB_TEMP + 0x84, 0x00);
+ write8p(TBARB_TEMP + 0x82, 0x00);
+
+ /*
+ * Step 4: If thermal reporting to an EC over SMBus is supported,
+ * then write 0x01 to TSREL, else leave at default.
+ */
+ write8p(TBARB_TEMP + 0x0a, 0x01);
+
+ /* Disable temporary BAR */
+ pci_and_config32(THERMAL_DEV, 0x40, ~1);
+
+ /* Clear temporary BAR address */
+ pci_write_config32(THERMAL_DEV, 0x40, 0);
+}
--
2.39.2
|
