summaryrefslogtreecommitdiff
path: root/util
AgeCommit message (Collapse)Author
2023-06-03util/nvmutil: cleanup: move logic out of main()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-03util/nvmutil: major cleanup. simpler arg handling.Leah Rowe
Also hardened the pledges. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-02util/nvmutil: simplify writeGbeFile()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: don't call writeGbeFile if O_RDONLYLeah Rowe
This replaces a check in the function for O_RDONLY, and fixes the bug where the "dump" command triggers such error. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: code cleanup (pledge/unveil calls)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: harden pledge/unveil calls (OpenBSD)Leah Rowe
*Open* files at the start, then unveil. The same overall behaviour is observed. In the case that invalid arguments are given, simply opening a file does not cause much performance impact (if any). Restrict operations as early as possible in code. Bonus: writeGbeFile also hardened; if flags is O_RDONLY, it aborts. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: fix faulty fd checkLeah Rowe
i screwed up in an earlier commit this change fixes a bug where on rhex(), each call would re-open /dev/urandom, resetting rfd Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: only swap/copy if checksum is validLeah Rowe
in practise, the file was never written unless the checksum was valid, but in the same of sloccount reduction i made it do the swap/copy before checking. while functionally ok, it never sat right with me. this is one example of where sloc count doesn't mean everything. code correctness is critical Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: use bsd-style indentationLeah Rowe
the style was already quite similar, but extended lines in bsd are indented by 4 spaces instead of a tab. this style has grown on me, so i'm adopting it here Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: clean up rhex()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: check correct return value on close()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: massive code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: move includes to nvmutil.hLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: move xpledge/xunveil to nvmutil.hLeah Rowe
They don't precisely *pertain* to nvmutil, but they are useful helper functions for calling pledge/unveil in OpenBSD. Ideally, the main file should only contain core logic pertaining to the execution of *nvmutil*. Put xpledge() and xunveil() in nvmutil.h. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: use SPDX license headersLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: move non-functions to nvmutil.hLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: use even more macros (code cleanup)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: remove unnecessary parenthesesLeah Rowe
2023-06-01util/nvmutil: simplify setWord() with word() macroLeah Rowe
There is nothing cooler than a macro. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: do xor swap in a macroLeah Rowe
eventually, everything will be a macro! Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil pledge,unveil: use correct err stringLeah Rowe
2023-06-01util/nvmutil: ensure that errno is set on err()Leah Rowe
When err() is called, it is intended that nvmutil will always exit with non-zero status, but with errno as the return value. Ensure that errno is *not* zero. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-01util/nvmutil: minor code cleanupLeah Rowe
Make word() a macro, simplify err_if(). Could also make setWord() a macro if I forego certain optimisations, but I'll leave it as-is. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-31util/nvmutil: simplified error handling in mainLeah Rowe
This change also reduces code indentation. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-31util/nvmutil: Use unveil, and harden pledgesLeah Rowe
After /dev/urandom (for MAC address randomisation) and the GbE file have been handled, unveil them. Unveil is a system call provided by OpenBSD that, when called, restricts access only to the files and/or directories specified, each given specific permissions. You can learn more about unveil here: https://man.openbsd.org/unveil.2 An ifdef rule makes nvmutil only use unveil on OpenBSD, because it's not available anywhere else. This is the same as with the pledge() system call. Where invalid arguments are given, and no action performed, pledge promises are also reduced to just stdio, preventing any writes to files, or reads from files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-31util/nvmutil: Harden pledge promisesLeah Rowe
After reading a file, remove rpath. When removing rpath, also remove wpath if flags are not to O_RDONLY (read-only disk operation). When wpath is permitted, and a file was successfully written, remove wpath. In order to permit /dev/urandom access in rhex(), I call it as a void just before re-calling pledge. The rhex() function has been written in such a way that /dev/urandom only needs to be read *once*. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-31util/nvmutil: Simplify use of pledge (on OpenBSD)Leah Rowe
Define xpledge which calls pledge and handles errors. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-30util/nvmutil: Use correct pledge promise (OpenBSD)Leah Rowe
I assumed wpath was all that's needed, but this simply allows writes. rpath must be specified alongside wpath, for reads. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-30util/*: Properly detect OpenBSD for pledge() callLeah Rowe
The utils that are pledged checked HAVE_PLEDGE which was bogus. OpenBSD defines __OpenBSD__, which you can check for in ifdef. This change makes nvmutil and spkmodem-recv *actually* use pledge, when the utils are compiled on OpenBSD. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-29util/e6400-flash-unlock: clean up commented codeLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Use pledge but only on OpenBSDLeah Rowe
It will only be used on OpenBSD. Other operating systems will behave in the same way. Pledge is feature specific to OpenBSD that restricts system operations, for security: https://man.openbsd.org/pledge.2 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Add -u flag (no line buffer)Leah Rowe
printf outputs to stdout, which is line buffered by default. Adding a -u option to disable buffering. Exit when a non-support flag is given, but adhere to current behaviour when no flag is given. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Tidy up global variablesLeah Rowe
They do not need to be initialised zero, because global variables are always zero by default, unless set differently by the programmer. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Make pulse variable globalLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Use parentheses on comparisonsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Move global variable: pulseLeah Rowe
It is only used by a single function. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Purge unused global: amplitudeLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Remove unused variable: posLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Re-order functions for clarityLeah Rowe
print_char() is referenced last, so declare it last. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Handle output in new functionLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Re-order prototypesLeah Rowe
Put them in the same order as declared. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Rename functions for clarityLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Return errno in mainLeah Rowe
This is a good general practise, to catch errors. Any errors found can then be handled in code. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Use correct printf specifierLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Add error handlingLeah Rowe
There was literally no error handling before. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Move logic out of mainLeah Rowe
Main should only be a skeletal structure. Actual logic should always be handled externally. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Rename variable for clarityLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Remove use of static keywordLeah Rowe
It is entirely superfluous in this program. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Rename variable for clarityLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-05-16util/spkmodem_recv: Remove space in function callsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-07-01 16:46:36 +0000