summaryrefslogtreecommitdiff
path: root/script
AgeCommit message (Collapse)Author
2023-12-30update/trees: avoid namespace clash in functionLeah Rowe
the logic of the previous commit was correct, but one of the functions was named the same as another function used in this file, causing a namespace conflict, and a build error Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: dont hardcode autoconf/bootstrap argLeah Rowe
at present, the bootstrap and configure script is only directly executed for grub, because grub is the only project that uses them in lbmk however, when i start adding linuxboot support, i will have to start building a lot of projects, some of which make use autoconf and bootstrap scripts e.g. ./bootstrap --foo ./configure --bar the "bootstrap" script is often used on GNU programs, because they like to over-engineer absolutely everything Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30unify script/update/trees and script/build/grubLeah Rowe
the script can now also handle autoconf build systems, whereas this could previously only be done for grub. with this change, the overall sloccount is also lower Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-28lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-27lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-27build/serprog: err if basename failsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-27update/trees: further simplify crossgcc handlingLeah Rowe
arch no longer needs to be set, on multi-tree projects, and it has been renamed to xarch the new behaviour is: if xarch is set, treat it as a list of crossgcc targets and go through the list. set the first one as the target, for what lbmk builds, but build all of the defined crossgccc targets crossgcc_ada is now xlang, and defines which languages to build, rather than whether to build gcc-gnat Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24lbmk scripts: shorter code linesLeah Rowe
while seemingly pedantic, this does actually make code easier to read. mostly just switching to shorthand for variable names, where no expansions or patterns are used Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24build/roms: rename two functions for clarityLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23lbmk scripts: general code cleanup/optimisationLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23build/roms: improved error handling for romsLeah Rowe
the rom functions print a path to the rom they built, which is then used, but these are called inside what are essentially subshells, and we had no error handling Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23build/roms: remove redundant checkLeah Rowe
cros roms are always using libgfxinit, with a coreboot framebuffer, so the "normal" initmode is never used. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23set version/projectname properlyLeah Rowe
lbmk used to set version/versiondate directly in err.sh, but now it's handled there by a function, which is called by the main script. script/update/release hadn't yet been adapted. the only change necessary is to call check_project() script/update/trees also makes use of it script/build/roms is using "projectname" Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23update/trees: fix infinite loopLeah Rowe
when make-all is being executed on a coreboot tree, the "./vendor download target" command is used, where target is the tree/board name. that script then checks whether cbfstool and ifdtool are built, and if they're not, they then call ./update trees -b coreboot utils bla bla bla in this scenario, project=coreboot and mode="", meaning make-all, and the same check that checks whether the vendor download script should be run, is executed, which in turn then checks cbutils again fix the infinite loop by checking whether it was coreboot utils, as opposed to *firmware*, that is to be built, before running ./vendor download Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23vendor/download: check whether configs exist firstLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23vendor/inject: fix dodgy error check (cd command)Leah Rowe
the x_ function doesn't handle arguments with spaces well, and this cd command is going to an asterisk, so it's unknown what the resultant string will be. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23don't delete microcode updates in rom imagesLeah Rowe
at present, lbmk can remove microcode updates on images for a given target, if the target specifies microcode_required="n" in target.cfg lbmk then provides images with microcode, and images without, in a given release. although the user can also remove them manually, this just makes it a bit more convenient, for those users who do wish to run without the updates. this functionality is provided only on those platforms where no-microcode is tested. well, this behaviour implements a compromise on libreboot policy, which is to always include microcode updates by default. see: Binary Blob Reduction Policy the *canoeboot* project now exists, developed in parallel with libreboot, and it ships without microcode updates, on the same targets where lbmk also handled this. running without microcode updates is foolish, and should not be encouraged. clean up lbmk by not providing this kludge. the libreboot documentation will be updated, telling such users to try canoeboot instead, or to remove the update from a given libreboot rom - this is still possible, and mitigations such as PECI disablement on GM45 are still in place (and will be kept), so that this continues to work well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23update/release: don't test ./vendor injectLeah Rowe
the purpose of script/update/release is not to test the build system, but to build release archives. testing of lbmk is done during the course of development. remove this bloat from the release script. we run the nuke mode anyway, to scrub blobs from releases, which will more or less test the logic in that script (the only difference is that it runs e.g. ifdtool --nuke instead of -i). Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23update/release: don't insert crossgcc tarballsLeah Rowe
why are we distributing gcc at all? the coreboot build system downloads it at build time, and the GNU rsync mirrors aren't going anywhere. simplify script/update/release by not handling gcc. this means: release archives will no longer contain gcc. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-22build/serprog: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-22general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21build/roms: remove modify_coreboot_rom()Leah Rowe
don't handle "romtype" at all, in board target.cfg files add /dev/null as pike2008 rom on amd boards. this serves the same purpose, adding them as empty vga roms, to add an empty rom in cbfs. pike2008 cards cause seabios to hang, when their oproms are executed, so we insert a fake rom on i945 thinkpads, use the coreboot config option: CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK when set, this enables the same bootblock copy, for use with bucts. these two cases, namely pike2008 roms and i945 bootblock copies, no longer need to be handled in code Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21update/trees crossgcc: call err if arch isn't setLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21update/trees: simplified crossgcc handlingLeah Rowe
only call crossgcc for coreboot and u-boot, but use hostcc for everything else. simplify the checking of which architecture to compile for. "arch" in target.cfg files has been modified, to allow further simplification. without this patch, the logic currently only *barely* avoids using crossgcc on things like utils, and only works in practise because, in practise, lbmk only works on x86_64 anyway. the new logic, as per this patch, is simpler and more robust. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-19update/release: minor cleanupLeah Rowe
remove unnecessary "continue" command. it's written at the end of a for loop, where it'll continue anyway Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-16remove DEBUG handling in lbmk (not needed)Leah Rowe
all it did was set -v in the shell, which doesn't yield very useful results. this is a relic of very old design in the libreboot build system, that is no longer needed. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-16fix several shellcheck warningsLeah Rowe
lbmk didn't quote certain arguments in commands, or used ! -z instead of -n, things like that. simple fixes. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-11handle errors on exits from subshellsLeah Rowe
most of these are probably redundant, and will never be called, but lbmk needs to be as safe as possible under fault conditions. fail early, fail hard. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-08lbmk: don't use status for unconditional returnsLeah Rowe
in cases where lbmk must always return from a function, there are some cases where it relies on non-zero exit status, which in practise is always the case, but may change in the future if the relevant part is modified e.g. do_something && return 0 the proper form is: do_something return 0 also do this for unconditional exits Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06Libreboot 2023110620231106Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-06put docs under docs/ in releases (not src/docs/)Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-01Libreboot 2023110120231101Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-01build/roms: re-add SeaGRUB build supportLeah Rowe
it didn't work in the past, but it does work nowadays; specifically, it only worked with libgfxinit in the past, but not on VGA ROMs. now it does work on VGA ROMs, tested on e6400 and t1650 so it was enabled there. in this setup, a special image is provided where SeaBIOS is the main payload, but it only loads GRUB; nothing else, every. this is called SeaGRUB. this setup is useful in cases where the user only has a GPU that lacks libgfxinit support. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-31build/roms: properly print noblobs rom namesLeah Rowe
when printing the name of the rom being created, it's done before the check to rename based on vendorfiles in target.cfg. this patch fixes that bug. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-31update/release: insert fake x201 me.binLeah Rowe
this makes the build work, for releases. this is not done during regular builds, only releases. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-29add lenovo x201 supportLeah Rowe
note: me6_update_parser needs to be written, similar to me7_update_parser, to generate the partition tables within intel me6 on lenovo bios updates. the current logic in lbmk goes like this: mkdir -p vendorfiles/cache/ and save your factory dump as: vendorfiles/cache/x201_factory.rom the build system has been modified, in such a way as to support extracting me.bin (which is the full one) and then neutering from this. this is done automatically, if the file is present, but you must first insert that file there, which means you'll need a dump of the original boot flash on your thinkpad x201 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-25include/option.sh: fix i945 bootblock copyLeah Rowe
it wasn't being copied right the roms under elf/ were being copied, but not the ones under bin/ - i need to audit it further for now, i run modify_coreboot_roms from build/roms instead of update/trees so, the ones under elf/ no longer have bootblocks copied. it's only done in bin/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-24build/roms: copy base rom again for u-bootLeah Rowe
when building only for u-boot, the current script works just fine. however, when building for other payloads in additional to u-boot, the final u-boot stage fails because other payloads are already inserted via cbfs. when we build u-boot, we do that last because we want u-boot setups to only be u-boot, nothing else. this patch enables qemu x86 to build properly with u-boot. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-2220231021hotfix: replace x_ with err in some places20231021fixLeah Rowe
keymaps weren't being set in keymay.cfg of cbfs, due to use of x_ in the rom script, and x_ doesn't handle quotes or spaces in arguments well. i'm going to remove use of x_ and xx_ (it's in my todo), for next release. for now, hot patch the release. i've gone through and replaced use of x_ with || err, in some places. not just the keymap.cfg command, but others too. in case there are more issues we missed. this commit is being tagged "20231021fix" and i'm using this tag to re-build the 20231021 release. i'll just replace the tarballs in rsync and add errata to the news page announcing the release. all i did was break peoples umlauts, i didn't brick their machines fortunately! very minor bug. anyway, x_/xx_ is a great idea, but sh isn't really designed for that style of programming. i'll go back to using just || err in the next release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-21Libreboot 2023102120231021Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/release: clean up temporary crossgcc dirLeah Rowe
clean it up after copying the tarballs i really hate how this logic is written, it's clunky but it should work; the only issue is that it's quite slow, and inefficient on use of disk space. however, i've not yet figured out how to reproducible add files to a tarball, once the tarball has been created, and i rely on sorting (of file names) when creating them. it's really not a problem because normal people won't use this script, only i or anyone who wants to test out the libreboot release infrastructure. this script is largely intended to *work* but i'm still annoyed by how crappy it is. i'll fix it after the Libreboot 20231021 release. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/release: confirm vdir path on exitLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/release: copy crossgcc to archiveLeah Rowe
everything downloaded, then tarballed, then built, now crossgcc is downloaded by coreboot. now extract, copy crossgcc tarballs, re-compress. TODO: simply add files to the archive, without re- compressing the whole thing. this is still more efficient than the old way: build everything, then clean and compress, making another build test on the release archive necessary; with this, there is still only one build test per release. with this, and the previous revisions dealing with submodules, the source archives should now be complete. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20always re-generate .git in lbmkLeah Rowe
in release archives, .git is excluded but the version and versiondate files are included. from these, the git history is re-created with the exact date (but not taking into account timezone, at present). in this way, lbmk will have git history in a release archive. some build systems, like coreboot, prefer that there be git history available, so this is a nice workaround on those build systems. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/release: delete *all* .git and .gitmodulesLeah Rowe
do it using find -exec this is more robust, and it will never need to be maintained over time (famous last words). this is done because now we download submodules for all git projects, so it's hard to predict. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20include/git: fix error caused by sh idiosyncrasyLeah Rowe
when [] is used right at the end of a function, or certain loops/subshells, some sh implementations will just return a non-zero exit Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/trees: don't run make if mode=fetchLeah Rowe
this fixes a regression caused by a previous revision Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/release .git/*: delete one more level upLeah Rowe
it couldn't hurt Signed-off-by: Leah Rowe <leah@libreboot.org>