| Age | Commit message (Collapse) | Author |
|---|
|
pass this argument: -m src
by doing this, only the src tarball will be made
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this way, the src tarball is guaranteed to be clean.
the downside is that lbmk itself does not currently
handle crossgcc downloads, and there may be some
stragglers such as third party modules automatically
downloaded by certain codebases that libreboot uses.
this will have to be audited later (and it will be).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's sometimes done unconditionally. this change
ensures that it is not repeated needlessly.
i observed otherwise that cbfstool would be
re-built from time to time, even if it was built.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Riku's mSATA patch for HP8300USDT was merged upstream, so the
patch has been dropped from lbmk because it is contained within
this new coreboot revision.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
coreboot closely matches upstream, whose current release
is version 1.2 from 2018, and coreboot has not changed it
in any meaningful way.
the upstream did add patches since, but they are documentation
patches only.
this means: we do not need to use the upstream version
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
also rename elf/coreboot to something scary
some users were flashing roms built under elf/, which
lack payloads. lbmk builds no-payload roms (and payloads)
under elf/ then inserts them, creating full (flashable)
images under bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The logic has been re-written, where source archives are
concerned. This clones the current repository, and starts
a new build from scratch. A custom release directory is
possible, by passing -d
This eliminates a step during build-testing, saving hours
of time, because it builds the release archive *inside* the
release archive, with git files removed, thus replicating
the same setup that the user would have.
This also makes everything a bit more consistent, because
it's guaranteed that a release archive will always have
the same files; previously, the release build script would
only copy what was already built, without building anything.
Now, this script builds everything itself.
The script also builds serprog images, not just coreboot.
Usage:
./update project release
If -d is not passed, release/ is used inside lbmk.
Otherwise, you could do:
./update project release -d /path/to/directory
If the directory exists, this script will exit (error).
Other minor fixes: build/fw/coreboot: make version in
coreboot-version (file) not contain hyphens, to work
around a quirk in coreboot's build system when not building
on regular libreboot releases. this quirk only appears
when lbmk is not being compiled under git.
The other main benefit of this change is that the new
script will probably require a lot less maintenance.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Just one script.
Just one!
Well, two, but the 2nd one already existed:
logic in update/project/trees and
update/project/repo was merged into
include/git.sh and update/project/build
was renamed to update/project/trees; an -f
option was added, which calls the functions
under git.sh
so git clones are now handled by the main build
script (for handling makefiles and defconfigs)
but the logic there is a stub, where git.sh
does all the actual heavy lifting
this cuts the file count down by two, and reduces
sloccount a reasonable amount because much of
the logic already exists in the build script, when
it comes to handling targets. git.sh was adjusted
to integrate with this, rather than act standalone
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I'm planning to re-use this function later, in other
files, to unify handling of target.cfg files.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is far less error-prone
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
certain functions are better placed there, rather than
in the main script
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The benefit now is that it can be cleaned. E.g.
./update project build -b coreboot utils
./update project build -b coreboot utils default
./update project build -c coreboot utils
./update project build -c coreboot utils default
the update/project/build script checks when arguments
are provided after the project name. if the first one
is "utils", then it acts in the same way as the old
build/coreboot/util script
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in the future, we may start downloading files that aren't
blobs, such as mxm port configs (on mainboards that use
MXM graphics)
this directory will contain all of those files
generally change the language used, across lbmk, to make
use of "vendorfile" instead of "blob"
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some utils were being needlessly re-downloaded.
fix that!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use the variable that is set up in blobutil.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
during the switch to src/ for all downloads, i
overlooked that the path check was hardcoded.
now the check for this binary is corrected.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
build/release/src was partly re-written to accomodate this
memtest86plus was patched to have a central Makefile, and
lbmk modified to use that, rather than mess with build32
and build64. the central Makefile just builds both targets
or cleans both targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Just one script.
Just one.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some x_ calls are made that aren't needed. this is now
corrected. additionally, some x_ calls were being made
that are quite error-prone, like ones that use $PWD.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
reduced sloccount, without reducing functionality
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
good lord, redundancy is indeed redundant.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the one at the end of main is unnecessary, because
it's handled inside the for loop.
this file isn't used anywhere else, so it's OK.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
as it turns out, i delete "seen" inside the for loop,
which is a more thorough way to do it.
thus, the first rm command is unnecessary.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it must be done *after* setting cfgsdir
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Instead of having detailed error messages, run most
commands through a function that calls err() under
fault conditions.
Where detail is still required, err() is still called
manually. Where it isn't, the error message is simply
whatever command was executed to cause the error.
This results in a massive sloccount reduction for lbmk;
specifically, 178 sloc reduction, or a 8.1% reduction.
The total sloccount is now 2022, for shell scripts.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
update/blobs/download and update/project/repo both use
the same logic, for setting variables with awk and a
specially formatted configuration file.
unify this logic under include/option.sh, and use that.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
mkdirs() should be in include/blobutil.sh, as should
extract_archive(), because that is primarily where
they are used.
script/update/blobs/download calls these functions
aswell, but it sources include/blobutil.sh so it's OK.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Don't use only wget. Some systems may only have curl.
The user can always install wget anyway, but why not
support both? I've added the right user agent string.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Just one function.
Just one.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This way, the file is checked regardless of what type of
blob is handled, not just Intel ME.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Because fetch() is only called now from blobs/download,
we can reliably know what dl_path should be.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
They are only ever used by script/update/blobs/*, so
put them all in blobutil.sh. This cuts down on the
number of scripts in lbmk.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
mrc.bin is now handled by include/mrc.sh, adapted
from now-deleted script/update/blobs/mrc
much of the logic has been re-written or adapted for
inside script/update/blobs/download
mrc links/hashes now defined in config/blobs/sources
the new code is simpler (and smaller). in addition,
lbmk can now easily handle mrc.bin files for other
platforms such as broadwell. watch this space.
the full .zip download is now cached, like with other
vendor downloads. this means it won't be re-downloaded
if it was already downloaded before.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
