summaryrefslogtreecommitdiff
path: root/script/update/trees
AgeCommit message (Collapse)Author
2024-01-01git.sh: unify am/submodule and tree copyingLeah Rowe
do it all in a single function! Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-01git.sh: clean up handling of tmp_git_dirLeah Rowe
delete it once once, and delete it much sooner, right at the start of script/update/trees main() Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: clean up the coreboot-version checkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: support custom make/autogen argumentLeah Rowe
this is now used in grub, for the FS_PAYLOAD_MODULES option in the make command lbmk should generalise as much logic as possible. in some parts of it, logic is hurrently hardcoded, specific to a given project that lbmk uses, but lbmk is essentially a source-based package manager, like what you might find on a small linux distro, so we need to try to be as generic as possible. lbmk is the "build system of build systems", so it has to work generically with as many of them as possible Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: generic cmake handlingLeah Rowe
it is no longer hardcoded just to be handled for uefiextract. it is now defined as cmakedir in target.cfg, for a single or multi tree project. if multi tree, it is applied to the specific tree, and has to be defined per tree the way it works is: as per cmakelist, a project will define which directory is to be built, and it will then generate a makefile in the main source tree (the build tree in cmake language, where the main CMakeLists.txt file exists) when the makefile has been generated, the project is then treated like any other project. the way cmake works, if a makefile has already been generated by it, in a given directory, running it again will fail and not affect anything; if it fails but the makefile doesn't exist, then something is wrong, but if the makefile does exist, then it's all fine and nothing happens at present, this is only used for uefiextract, which is part of src/uefitool Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: avoid namespace clash in functionLeah Rowe
the logic of the previous commit was correct, but one of the functions was named the same as another function used in this file, causing a namespace conflict, and a build error Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30update/trees: dont hardcode autoconf/bootstrap argLeah Rowe
at present, the bootstrap and configure script is only directly executed for grub, because grub is the only project that uses them in lbmk however, when i start adding linuxboot support, i will have to start building a lot of projects, some of which make use autoconf and bootstrap scripts e.g. ./bootstrap --foo ./configure --bar the "bootstrap" script is often used on GNU programs, because they like to over-engineer absolutely everything Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-30unify script/update/trees and script/build/grubLeah Rowe
the script can now also handle autoconf build systems, whereas this could previously only be done for grub. with this change, the overall sloccount is also lower Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-28lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-27lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-27update/trees: further simplify crossgcc handlingLeah Rowe
arch no longer needs to be set, on multi-tree projects, and it has been renamed to xarch the new behaviour is: if xarch is set, treat it as a list of crossgcc targets and go through the list. set the first one as the target, for what lbmk builds, but build all of the defined crossgccc targets crossgcc_ada is now xlang, and defines which languages to build, rather than whether to build gcc-gnat Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24lbmk scripts: shorter code linesLeah Rowe
while seemingly pedantic, this does actually make code easier to read. mostly just switching to shorthand for variable names, where no expansions or patterns are used Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-24lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23set version/projectname properlyLeah Rowe
lbmk used to set version/versiondate directly in err.sh, but now it's handled there by a function, which is called by the main script. script/update/release hadn't yet been adapted. the only change necessary is to call check_project() script/update/trees also makes use of it script/build/roms is using "projectname" Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23update/trees: fix infinite loopLeah Rowe
when make-all is being executed on a coreboot tree, the "./vendor download target" command is used, where target is the tree/board name. that script then checks whether cbfstool and ifdtool are built, and if they're not, they then call ./update trees -b coreboot utils bla bla bla in this scenario, project=coreboot and mode="", meaning make-all, and the same check that checks whether the vendor download script should be run, is executed, which in turn then checks cbutils again fix the infinite loop by checking whether it was coreboot utils, as opposed to *firmware*, that is to be built, before running ./vendor download Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-23lbmk scripts: general code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21build/roms: remove modify_coreboot_rom()Leah Rowe
don't handle "romtype" at all, in board target.cfg files add /dev/null as pike2008 rom on amd boards. this serves the same purpose, adding them as empty vga roms, to add an empty rom in cbfs. pike2008 cards cause seabios to hang, when their oproms are executed, so we insert a fake rom on i945 thinkpads, use the coreboot config option: CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK when set, this enables the same bootblock copy, for use with bucts. these two cases, namely pike2008 roms and i945 bootblock copies, no longer need to be handled in code Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21update/trees crossgcc: call err if arch isn't setLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-21update/trees: simplified crossgcc handlingLeah Rowe
only call crossgcc for coreboot and u-boot, but use hostcc for everything else. simplify the checking of which architecture to compile for. "arch" in target.cfg files has been modified, to allow further simplification. without this patch, the logic currently only *barely* avoids using crossgcc on things like utils, and only works in practise because, in practise, lbmk only works on x86_64 anyway. the new logic, as per this patch, is simpler and more robust. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-16remove DEBUG handling in lbmk (not needed)Leah Rowe
all it did was set -v in the shell, which doesn't yield very useful results. this is a relic of very old design in the libreboot build system, that is no longer needed. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-16fix several shellcheck warningsLeah Rowe
lbmk didn't quote certain arguments in commands, or used ! -z instead of -n, things like that. simple fixes. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-12-11handle errors on exits from subshellsLeah Rowe
most of these are probably redundant, and will never be called, but lbmk needs to be as safe as possible under fault conditions. fail early, fail hard. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-11-08lbmk: don't use status for unconditional returnsLeah Rowe
in cases where lbmk must always return from a function, there are some cases where it relies on non-zero exit status, which in practise is always the case, but may change in the future if the relevant part is modified e.g. do_something && return 0 the proper form is: do_something return 0 also do this for unconditional exits Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-25include/option.sh: fix i945 bootblock copyLeah Rowe
it wasn't being copied right the roms under elf/ were being copied, but not the ones under bin/ - i need to audit it further for now, i run modify_coreboot_roms from build/roms instead of update/trees so, the ones under elf/ no longer have bootblocks copied. it's only done in bin/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20include/git: fix error caused by sh idiosyncrasyLeah Rowe
when [] is used right at the end of a function, or certain loops/subshells, some sh implementations will just return a non-zero exit Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20update/trees: don't run make if mode=fetchLeah Rowe
this fixes a regression caused by a previous revision Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20error handling code cleanup and fixesLeah Rowe
in some cases, use of x_ or xx_ can be error-prone, due to the way $@ is handled; commands requiring quotes, or with funny file names as arguments such as spaces in the file name, or other special characters, can make the x/xx functions break. in those cases, where x/xx must not be used, the commands use || err instead in other cases, use of x/xx is superfluous, and has been removed in some commands. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20another code cleanupLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-20lbmk: use 2-level directory structure in script/Leah Rowe
as opposed to the current 3-level structure. recent build system simplifications have enabled this change, thus: ./build fw coreboot -> ./build roms ./build fw grub -> ./build grub ./build fw serprog -> ./build serprog ./update project release -> ./update release ./update project trees -> ./update trees ./update vendor download -> ./vendor download ./update vendor inject -> ./vendor inject alper criticised that the commands were too long, so i made them shorter! Signed-off-by: Leah Rowe <leah@libreboot.org>