summaryrefslogtreecommitdiff
path: root/script/update/project
AgeCommit message (Collapse)Author
2023-10-13update/release: if *GNU* tar, use --mtimeLeah Rowe
with --mtime, files added to the archive can be set to a static date (in this case, the unix epoch) the one used here is derived from git commit dates, and it is static; if not being handled in lbmk.git, the versiondate file never changes this is the first patch in a series of patches designed to bring about reproducible builds in libreboot a solution will need to be found, for non-GNU tar implementations, because they did not have an equivalent option according to their manpages. for example, BSD tar implementations. perhaps i could systematically go around changing file dates, on each file, as a fallback behaviour? Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-13build/release: support skipping rom buildsLeah Rowe
pass this argument: -m src by doing this, only the src tarball will be made Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-13update/release: make src tarball first, then romsLeah Rowe
this way, the src tarball is guaranteed to be clean. the downside is that lbmk itself does not currently handle crossgcc downloads, and there may be some stragglers such as third party modules automatically downloaded by certain codebases that libreboot uses. this will have to be audited later (and it will be). Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12coreboot/default bump: rev d862695f5f, 12 Oct 2023Leah Rowe
Riku's mSATA patch for HP8300USDT was merged upstream, so the patch has been dropped from lbmk because it is contained within this new coreboot revision. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-12use me_cleaner from coreboot instead of upstreamLeah Rowe
coreboot closely matches upstream, whose current release is version 1.2 from 2018, and coreboot has not changed it in any meaningful way. the upstream did add patches since, but they are documentation patches only. this means: we do not need to use the upstream version Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10fix warning about coreboot elf/ vs bin/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-10build/fw/coreboot: warning about bin/ versus elf/Leah Rowe
also rename elf/coreboot to something scary some users were flashing roms built under elf/, which lack payloads. lbmk builds no-payload roms (and payloads) under elf/ then inserts them, creating full (flashable) images under bin/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-08update/release/*: merge to update/project/releaseLeah Rowe
The logic has been re-written, where source archives are concerned. This clones the current repository, and starts a new build from scratch. A custom release directory is possible, by passing -d This eliminates a step during build-testing, saving hours of time, because it builds the release archive *inside* the release archive, with git files removed, thus replicating the same setup that the user would have. This also makes everything a bit more consistent, because it's guaranteed that a release archive will always have the same files; previously, the release build script would only copy what was already built, without building anything. Now, this script builds everything itself. The script also builds serprog images, not just coreboot. Usage: ./update project release If -d is not passed, release/ is used inside lbmk. Otherwise, you could do: ./update project release -d /path/to/directory If the directory exists, this script will exit (error). Other minor fixes: build/fw/coreboot: make version in coreboot-version (file) not contain hyphens, to work around a quirk in coreboot's build system when not building on regular libreboot releases. this quirk only appears when lbmk is not being compiled under git. The other main benefit of this change is that the new script will probably require a lot less maintenance. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/project/*: merge to update/project/treesLeah Rowe
Just one script. Just one! Well, two, but the 2nd one already existed: logic in update/project/trees and update/project/repo was merged into include/git.sh and update/project/build was renamed to update/project/trees; an -f option was added, which calls the functions under git.sh so git clones are now handled by the main build script (for handling makefiles and defconfigs) but the logic there is a stub, where git.sh does all the actual heavy lifting this cuts the file count down by two, and reduces sloccount a reasonable amount because much of the logic already exists in the build script, when it comes to handling targets. git.sh was adjusted to integrate with this, rather than act standalone Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/project/trees: handle seen in fetch_configLeah Rowe
I'm planning to re-use this function later, in other files, to unify handling of target.cfg files. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07use quotes when checking empty strings in scriptsLeah Rowe
this is far less error-prone Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07update/project/build: move helpers to option.shLeah Rowe
certain functions are better placed there, rather than in the main script Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07build/coreboot/util: merge to update/project/buildLeah Rowe
The benefit now is that it can be cleaned. E.g. ./update project build -b coreboot utils ./update project build -b coreboot utils default ./update project build -c coreboot utils ./update project build -c coreboot utils default the update/project/build script checks when arguments are provided after the project name. if the first one is "utils", then it acts in the same way as the old build/coreboot/util script Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07unified projectname/version/versiondate handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07rename blob/ to vendor/Leah Rowe
in the future, we may start downloading files that aren't blobs, such as mxm port configs (on mainboards that use MXM graphics) this directory will contain all of those files generally change the language used, across lbmk, to make use of "vendorfile" instead of "blob" Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-07put all src downloads under src/Leah Rowe
build/release/src was partly re-written to accomodate this memtest86plus was patched to have a central Makefile, and lbmk modified to use that, rather than mess with build32 and build64. the central Makefile just builds both targets or cleans both targets Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-06rename build/project/trees to update/project/buildLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-03update/project/trees: remove errant assignmentsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-03update/project/trees: split up main()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-03general code cleanup in shell scriptsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: fix error handling on mkdirLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: optimise error handlingLeah Rowe
some x_ calls are made that aren't needed. this is now corrected. additionally, some x_ calls were being made that are quite error-prone, like ones that use $PWD. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: simplified error handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: general code cleanupLeah Rowe
reduced sloccount, without reducing functionality Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: rm yet another rm lineLeah Rowe
good lord, redundancy is indeed redundant. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: remove one more rm lineLeah Rowe
the one at the end of main is unnecessary, because it's handled inside the for loop. this file isn't used anywhere else, so it's OK. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: remove redundant rm commandLeah Rowe
as it turns out, i delete "seen" inside the for loop, which is a more thorough way to do it. thus, the first rm command is unnecessary. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: remove unnecessary linebreakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-02update/project/trees: rm "seen" in the right placeLeah Rowe
it must be done *after* setting cfgsdir Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-10-01Greatly simplify error handling in shell scriptsLeah Rowe
Instead of having detailed error messages, run most commands through a function that calls err() under fault conditions. Where detail is still required, err() is still called manually. Where it isn't, the error message is simply whatever command was executed to cause the error. This results in a massive sloccount reduction for lbmk; specifically, 178 sloc reduction, or a 8.1% reduction. The total sloccount is now 2022, for shell scripts. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30simplify initialising variables in shell scriptsLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30update/*/*: unified scanning of revisions/sourcesLeah Rowe
update/blobs/download and update/project/repo both use the same logic, for setting variables with awk and a specially formatted configuration file. unify this logic under include/option.sh, and use that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-27move build/command/options to include/option.shLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25only update git submodules in project/treesLeah Rowe
do not update them in project/repos - despite what the previous commit message says, this behaviour is error prone and should be avoided. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25update/project/*: unified git reset handlingLeah Rowe
With this change, lbmk now also updates submodules on simple git clones, not just multi-tree clones. This is OK, because git does not return non-zero status when git submodule update is ran, where git submodules are not actually defined. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25update/project/*: unified patch handlingLeah Rowe
Handle patches by a function at include/git.sh Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25update/project/trees: remove extra.sh handlingLeah Rowe
This functionality has never been used, except in the erstwhile osboot project, and even then only experimentally. It was intended for use with coreboot's gerrit site, but it became Libreboot project policy that this not be relied upon, instead preferring to include patches directly within lbmk. This functionality can be re-added, if necessary. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25Update email address for Leah Rowe copyrightsLeah Rowe
also, some of them were out of date; years now updated. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25Use SPDX license headers on all scriptsLeah Rowe
This results in much cleaner copyright and license declarations. SPDX headers are legally recognised and make auditing easier. Also, remove descriptions of each script, from each script. Libreboot documentation at docs/maintain/ describes them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25update/repos: concatenate multiple revision filesLeah Rowe
With this change, it's still possible to have a single file at config/git/revisions, but this has been scrapped. Instead, multiple files now exist under config/git/ with the same modules declared, but the files are separated logically. List of files under config/git: * bios_extract * biosutilities * coreboot * flashrom * grub (gnulib also defined here) * me_cleaner * memtest86plus * seabios * serprog (multiple projects defined) * u-boot * uefitool The rationale behind this change is simple: in the future, we will stop relying on build systems within imported projects for the import of git submodules. Instead, we will handle them directly in lbmk. Additionally, a Linux payload is planned for Libreboot, made easier by the recent audit (script handle/make/config makes it easy to integrate Linux, and handle cross-compilers for userland utilities); a "linux" file under config/git/ could also define rules for each project besides linux, such as musl libc, busybox and other utilities. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09update/project/*: remove redundant checksLeah Rowe
these scripts used to be in the main directory of lbmk, and thus needed to check for root user, and also git credentials. now they are called by the main lbmk script, which also runs the same checks. avoid waste of resources by not running the same check twice. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-08Support multiple dependencies per projectRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-08Cleaner parent directory creationRiku Viitanen
My previous patch b0rked memtest and others because when making sure their parent directory (the project root) exists, it would instead create the project directory (memtest86lus). The later move would then put the git repo inside that (memtest86plus/memtest86plus_123456). We just need to make sure we don't create the target directory itself. This way, there's no need to hardcode any project names. Tested by ./updating rpi-pico-serprog, memtest86plus, grub and seabios. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-04don't use /tmp/ for git clones. use tmp/ instead.Leah Rowe
the /tmp/ file system may be a tmpfs, with conservative memory limits, depending on host system. it's more likely that the user will have enough disk space under tmp/ within lbmk (if they don't, they can't use lbmk anyway). that is to say: more likely that they would have the disk space, but not the memory. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04merge config/ and resources/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03fix memtest86plus download/buildLeah Rowe
the mkdir command in update/project/repo, added for pico-pi integration, broke a bunch of other downloads. the fix is a bit of a hack but it should hold for now. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03automate rpi-pico serprog buildsRiku Viitanen
./build rpi-pico serprog build bin/serprog/rpi-pico-serprog.uf2 Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-01update the fetch scripts themselvesLeah Rowe
the fetch scripts call themselves, for dependencies Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01handle project downloads in main lbmk scriptLeah Rowe
this means the unified /tmp handling is now provided for in both the former "fetch" and "fetch_trees" script, which are now (respectively): ./update project repo ./update project trees if the fetch scripts weren't cleaning /tmp before, they now are, because lbmk handles it Signed-off-by: Leah Rowe <leah@libreboot.org>