| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's bloat. telling the user to rtfm is something that
we already do on irc; they will still ask how to do
everything, and ignore the message from badcmd(), or
they will automatically know to rtfm.
i'm on a massive purge, removing bloat from lbmk as
part of Libreboot Build System Audit 6.
all bloat must go.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
replace it with logic that simply uses "." to load
files directly. for this, "vcfg" is added as a variable
in coreboot target.cfg files, referring to a directory
in config/vendor/ containing a file named pkg.cfg, and
this file then contains the same variables as the
erstwhile config/vendor/sources
config/git files are now directories, also containing
pkg.cfg files each with the same variables as before,
such as repository link and commit hash
this change results in a noticeable reduction in code
complexity within the build system.
unified reading of config files: new function setcfg()
added to lib.sh
setcfg checks if a config exists. if a 2nd argument is
passed, it is used as a return value for eval, otherwise
a string calling err is passed. setcfg output is passed
through eval, to set strings based on config; eval must
be used, so that the variables are set within the same
scope, otherwise they'd be set within setcfg which could
lead to some whacky results.
there's still a bit more more to do, but this single change
results in a substantial reduction in code complexity.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <info@minifree.org>
|
|
This reverts commit 3610667e3db08ff1db4f7784ff5a879d8aebce9d.
The output of some functions in the roms script are used as
an argument in cp and mv commands, also cbfstool. I overlooked
this fact in a previous code optimisation.
Revert it. The change only reduced sloccount by a few lines
anyway.
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is bloat, because it's something the user can already
do at runtime configuration anyway.
set it to a reasonable default of 8 seconds instead of 5,
and don't honour the timeout variable in target.cfg.
this will be documented in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
i disabled a check in the script, while testing a prior
modification. re-introoduce the check, which is put there
to yield an error condition if no targets were compiled.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
payloads are compiled before coreboot, but it doesn't matter
to the build speed whether this is done first.
reduce the lines of code by checking payload builds *while*
adding them to the coreboot images. this means that coreboot
is now compiled first, before the payloads.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this makes the build_payloads() function nicer to read
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's only meaningfully used once, so just hardcode
the string, which is not set dynamically anyway.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use eval to avoid having two mv commands
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the user knows where to look. replace it with a single
declaration.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
nowadays, we don't insert GRUB keymaps automatically, for
sake of efficiency; without one, the default is US QWERTY.
a user will only want one keymap in particular, so this
is more efficient. in practise, they're either building
from source anyway, or using the inject scripts which
compile cbfstool anyway, so the user will already have
cbfstool.
also output this message from the inject script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
there are two for loops that use x as a variable anme,
and an idiosyncrasy of certain sh implementations is
that these become global;
the result in this case was that when you finish building
every target in "./build roms", it would print "libgfxinit"
repeatedly, comma separated, instead of a comma-separated
list of the targets that were built.
work around it by renaming the variable in one of the loops.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
cproms() never returns non-zero, so it doesn't make
sense to use x_ here
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
that way, we don't have to delete the temporary file.
just move it entirely.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
e.g. the operator might specify mv instead
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use a common string when setting this path
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove variables that are not meaningfully used
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
remove variables that are not meaningfully used
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
cbcfg is already a global variable, so there's no reason
to set it again at the start of this function.
remove the check for whether the given coreboot config
exists, to the calling function instead of build_roms().
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
uboot_config is later only used if payload_uboot is set
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the tmpcfg variable will be useful elsewhere, for
the same kind of change as before.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we don't need to call mktemp everytime.
just use a staticly named file in tmpdir
and keep overwriting it.
these files are only small, and they get deleted
when the build system exits later on.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
forgot to shift
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
we check it twice, which we don't need to do.
we only need to check it once!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
build_grub_roms never returns a non-zero value
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the background is only a few kb. the whole rationale
before was to limit the space used in memdisk, but this
decision was made when the background was much bigger;
it has since been optimised greatly, and the grub modules
were heavily reduce, so it should be safe.
grub's memdisk breaks when you add too much data to it.
as part of simplifying the rest of lbmk, this change removes
some more bloat from the rest of lbmk. handling this in the
memdisk is much simpler than handling it with cbfstool.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
add a generic function that can insert payloads with lzma
compression, or raw files without compression
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
if not inserted, the default keymap is usqwerty.
don't waste ssd write cycles copying so many images,
or cpu time compressing so many. the user can simply
add a keymap.gkb file to cbfs and it will work fine.
this will be documented in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
rely on return status per each of the three main rom
functions, to then update the "targets" variable.
use this as the basis to determine which targets were
built, during final confirmation when the script exits.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
