summaryrefslogtreecommitdiff
path: root/script/build
AgeCommit message (Collapse)Author
2023-09-10build/release/src: delete elf/ in srcdirLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: remove cbutils/ in srcdirLeah Rowe
the builds were being created within that srcdir, because build/release/src runs lbmk commands within it, and one of them is building (re-building) it. there's no point addressing this, other than rm -Rf Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: remove errant codeLeah Rowe
the main lbmk script already creates these files, and these files are then copied by build/release/src so we don't need to re-create them here Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/roms: use -T0 on serprog tarballsLeah Rowe
xz supports using multiple threads so use multiple threads Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/boot/roms stragglers: properly handle errorsLeah Rowe
there were a few missing err calls i actually went through all of lbmk and found no instances where err calls were missing except in build/boot/roms_helper Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: re-create symlinks, don't copyLeah Rowe
if you copy a symlink, you create a whole new file with the contents of what that symlink points to. what we need to do instead is re-create the symlinks. this is relevant for all symlinks to the main lbmk script, from the main directory of lbmk.git. this avoids there being multiple copies of the main lbmk script, in release archives. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09scripts: use printf, not echo, where appropriateLeah Rowe
printf has more universal behaviour, across various implementations of sh, so it's better to use this. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09scripts: better handling of printf: stdout/stderrLeah Rowe
in some cases, messages that should be considered errors or warnings, were being written to the standard output, rather than written as error messages. also: one or two printf statements should specifically avoid printing errors (to any file); in these cases, stdout has been redirected to /dev/null Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09build/release/roms: remove errant line breakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09use sha512sum to check downloads, not sha1sumLeah Rowe
sha-1 has known collision issues, which may not be readily exploitable yet (in our context), but we should ideally use a more secure method for checking file integrity. therefore, use sha-2 (sha512sum) for checking files. this is slower than sha-1, but checksum verification is only a minor part of what lbmk does, so the overall effect on build times is quite negligible. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09Merge pull request 'Add stm32-vserprog' (#129) from Riku_V/lbmk:stm32 into ↵Leah Rowe
master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/129
2023-09-09Add stm32-vserprogRiku Viitanen
Tested on a Nucleo-F042K6. That has an onboard stlink: `st-flash --format ihex write bin/serprog_stm32/serprog_nucleo-f042k6.hex` The usb port used for flashing is separate, its is exposed on the pin header instead. Check boards/nucleo-f042k6.h for usb pinout. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-09build/boot/rom: only insert scan.cfg if neededLeah Rowe
where it is set to "both" (grub_scan_disk), inserting scan.cfg is superfluous, because grub.cfg defaults to both anyway, unless otherwise specified by scan.cfg, and only if that file exists within cbfs. thus, save a bit of build time (only a slight saving) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09build/boot/roms: delete tmpcfg when doneLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09set grub.cfg timeout to 5s (10 on some boards)Leah Rowe
target.cfg can now specify e.g. grub_timeout=20 this would then be inserted as timeout.cfg in cbfs, containing the instruction: set timeout=20 HP laptops need a bit of extra time, due to the delay caused by the EC bug workaround deployed in GRUB desktops in general need extra time. this too is set to 10s, like the HP laptops. only insert timeout.cfg if actually needed (declared in target.cfg), otherwise grub.cfg will default to 5s Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-08Build pico-serprog binary release archiveRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-08Build for all pico board, not just the "original"Riku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-05build/release/roms: use tmp/romdir, not TMPDIRLeah Rowe
we must conserve memory usage, in the event that the user's /tmp is a tmpfs. copying of ROM images into tmpfs is ill advised; we must copy them, due to how the release process works (e.g. stripping of blobs, but this must be done in a way so as to not interfere with regular builds, thus they are copied instead) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-05grub: make backgrounds configurable in target.cfgLeah Rowe
now under coreboot mainboards, target.cfg can specify a background. if not specified, the 1280x800 one is assumed, and used by default. it can be overridden. the path should be relative to: config/grub/background/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04build/release/roms: fix ucode handlingLeah Rowe
microcode_required wasn't being reset per target, leading to unreliable results. this fixes that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04build/release/roms: simplify defcongic handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04build/boot/roms: don't create empty bin/ directoryLeah Rowe
also: only return zero status if rom images were succesfully built, and print a list of each rom image directory based on what was actually compiled, rather than just saying that the rom images are stored under bin/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04add checkversion to build/release/srcLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04merge config/ and resources/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04move ifd/gbe configs into config/ifd/Leah Rowe
it doesn't really make sense for them to be under blobs/ - nominally, they are blobs, but they are well-understood data files containing config data, that is easily parsed by tools like ich9show or ifdtool (and tools like bincfg or nvmutil) blobs/ has been re-purposed: this directory no longer exists in lbmk, but it is created (and on .gitignore) when needed, by blobutil thus, the blobs/ directory shall only contain vendor files, and only those files that libreboot scrubs from releases. therefore, build/release/src can (and has been) simplified; it currently copies just the ifd and gbe files from blobs/, selectively, and this logic is quite error prone, requiring maintenance. now, the build/release/src script simply copies config/ (which only ever contains distributable files) and entirely ignores the blobs/ directory the blob download script already creates the required directory, except for the sch5545 download; this is now fixed lbmk code size is slightly smaller, due to this patch Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03ich9m mainboards: use pre-assembled ifd/gbe filesLeah Rowe
This cuts down on build time, and it will allow libreboot to remove large chunks of code. these ifd/gbe configs are just binary-encoded config files, in a format well-understood. they can easily be opened up and displayed, using ich9show or ifdtool, and manipulated by these tools; bincfg can generate them from scratch, and nvmutil can change mac addresses, for example. so, do this and remove from lbmk the following: * ich9utils (which contains ich9gen) - not needed anymore * code in lbmk for handling ich9gen and insertions; the coreboot build system is now used, for this same purpose, so remove such code from lbmk this results in a massive code size reduction (thousands of lines) in lbmk; smaller when only looking at the build system, but much larger when you consider that ich9utils is also removed (about 3k sloc) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03add ich9m ifd/gbe filesLeah Rowe
a follow-up patch will make use of these, rather than ich9gen, and ich9gen will be deleted. these files were in fact generated *by* ich9gen. coreboot has ifdtool and bincfg, the latter of which can generate both ifd and gbe files for ich9m. that, and nvmutil which is part of libreboot, can change gbe mac addresses. i was going to replace ich9gen with a script that would run bincfg, ifdtool and nvmutil, to greatly reduce code size, because ich9gen is about 3k sloc. however, in practise we would always generate the same ifd config, and basically only change the mac address if that's what the user wants; nvmutil can already do that just fine. so, just include the binaries directly. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03build/release/src: copy e6430 ifd/gbeLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03build/rpi-pico-serprog: better error handlingLeah Rowe
use a subshell for changing directory, and use more verbose error messages under fault conditions Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03fix rpi-pico builds when running it twiceLeah Rowe
it needed to be make-cleaned Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03Less cat abuseRiku Viitanen
More than 90% of cats were thus terminated. read (shell built-in) is better at reading, and dogs are better pets. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-03automate rpi-pico serprog buildsRiku Viitanen
./build rpi-pico serprog build bin/serprog/rpi-pico-serprog.uf2 Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-03build/release/src: only clean kbc1126 if it existsLeah Rowe
the way this script works, it only copies what was built, but it currently operatios as though coreboot/default always exists, and then cleans the kbc1126 util this patch fixes such buggy behaviour Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03unify build/clean scripts: use handle/make insteadLeah Rowe
The -c option is added for distclean, and -x for crossgcc-clean, in handle/make/config about 100 sloc removed from lbmk Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-03build/release/*: use -T0 in xz, for multithreadingLeah Rowe
The -T option specifies how many threads xz shall use. The -T value of zero shall dictate that xz use so many threads as there are CPUs, on the host system. This will probably speed up the release process a bit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-02coreboot/e6400: support nvidia modelsLeah Rowe
The same ROM images that you flash on Intel GPU variants, are now flashed on Nvidia models. The same ROM will work on both. If an Intel GPU variant is present, libgfxinit is used, and the VGA ROM is used if an Nvidia GPU variant; however, release ROMs will scrub the nvidia option ROM, so release ROMs will only work on Intel GPUs unless you run the blobutil inject command. I decided to no longer have this under WIP, but to put it in master. The issue with it pertains to video drivers, which is not Libreboot's problem. Nouveau crashes under Linux, so use "nomodeset" if it does. The "nv" drivers in BSD systems work very well. The nvidia model of E6400 isn't recommended for other reasons, namely: poor thermal cooling (thermal pad on the GPU) and that Nvidia GPU doesn't get very good performance on any libre drivers anyway. The Intel GPU variant is better, in terms of power efficiency and software support; the intel variant also works with native graphics initialisation in coreboot. This board port already only enables SeaBIOS, which will simply execute the VGA ROM. Blobutil already supports reading the config, detecting that a VGA ROM is needed, because that part of the WIP E6400 branch was already merged in lbmk master. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01build/release/src: bugfix: actually copy cb/ub/sbLeah Rowe
coreboot, seabios and u-boot were not being copied at all Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01build/release/src: copy handle symlinkLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01build/release/src: remove Makefile referenceLeah Rowe
lbmk never needed a makefile, because the build system is all shell scripting; the former makefile simply called those scripts, in a way that was mostly superfluous build/release/src was still trying to copy it, so let's remove it from that file Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01build/release/src: fix bad variable referenceLeah Rowe
it's i, not 1 Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01update build/release/src based on lbmk changesLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01build/coreboot/utils: exit 1 if target.cfg missingLeah Rowe
it was previously trying to "continue", despite not being inside a loop. the correct instruction would have been "return 0", but then I thought it'd be better to err here Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-01handle project downloads in main lbmk scriptLeah Rowe
this means the unified /tmp handling is now provided for in both the former "fetch" and "fetch_trees" script, which are now (respectively): ./update project repo ./update project trees if the fetch scripts weren't cleaning /tmp before, they now are, because lbmk handles it Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-31only remove microcode in build/release/romsLeah Rowe
libreboot's build system, lbmk, *is* available to use in releases aswell (use the _src tarball), but it is mostly intended for development, in lbmk.git well, there's not much point wasting time / disk space generating no-microcode roms within lbmk they should be generated only at release time, alongside the default ones this patch implements that, thus speeding up the build process and saving disk usage during development the other alternative was to add a new option in build/boot/roms, -m, that would opt in to removing them, but this is extra complexity for something that is ill advised and only provided to appease certain people Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-31move build/boot/rom moverom to handle/make/configLeah Rowe
most of these steps do not need to be repeated, per image. move it into handle/make/config, so that the steps are performed on files that go under elf/coreboot (this will save on build time). the logic for handling 4MB ROM images on sandy/ivy was unused, and has been removed. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-31build/release/roms: fix syntax errorLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-29build/release/src: copy the include/ directoryLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-29grub: all one grub.elf containing keymaps and cfgLeah Rowe
new behaviour: * grub.cfg and grubtest.cfg no longer inserted to cbfs * grub.cfg in memdisk instead * grub.cfg in memdisk defers to cbfs/grub.cfg if added (not added by default, anymore) * does not defer to grubtest.cfg even if available * only shows link to grubtest.cfg if available, as a menuentry item keymaps: if /keymap.gkb exists in cbfs, it uses that by default, but by default this isn't added. instead, it looks for a file named keymap.cfg and sources that, which then sets the keymap to one that is located under memdisk. this file is inserted for each rom, per layout. if keymap.gkb and keymap.cfg both absent, grub.cfg in memdisk shall defer to usqwerty as the default keymap grub_scan_disk: grub.cfg looks for cbfs file "scan.cfg" and sources that if found, which will be inserted with the string: set grub_scandisk=setting_goes_here (based on target.cfg, generated by build/boot/roms automatically). If no scan.cfg is found, it defaults to "both" The "background.png" file remains unchanged, and present in CBFS, used by grub.cfg if present (and it is, by default) This change actually *saves* space in CBFS, due to compression, and means that the grub.cfg is now compressed heavily. This is also safer, because now the user overrides grub.cfg by adding it, and they can still add grubtest.cfg for testing first. If they accidentally delete both configs from cbfs, Libreboot will fall back to the one in memdisk which would presumably not be deleted. This also means that lbmk can now more easily be used by other build systems, that just want the GRUB part to re-use in their own project. For example, people who want to build custom coreboot images without using Libreboot's build system. This change also *speeds* up the build process considerably, on the parts where ROM images are copied. It's less than half a second now, whereas previously it took about 30-45 seconds for ROM images to copy, because of grub.elf being re-added in each ROM via cbfstool, where compression is used; I believe the compression part is what caused slowness. Much, much faster, more versatile builds. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-28build/boot/roms: fix bad variable assignmentLeah Rowe
this was an oversight, in a previous commit. there was a space, between variable name and the equals sign, and then another space, so it was trying to *execute* the rom Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-08-28build/boot/roms: simplify ich9m ifd handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>