summaryrefslogtreecommitdiff
path: root/script/build
AgeCommit message (Collapse)Author
2023-09-30build/boot/roms: split up handle_targets()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: check all targets before buildingLeah Rowe
If one of them doesn't exist, error out. Previously, a build would start but then it would error out later on. This implements the mentality: fail early, fail hard Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: merge handle_targets/build_targetLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: only run confirm_targets onceLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: rename buildrom to build_targetLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: split up main()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: simplify buildrom() handlingLeah Rowe
Only one for loop is required. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: support "all" if argument passedLeah Rowe
e.g. -k ukqwerty previously, this would not work: ./build boot roms -k ukqwerty all only this would work: ./build boot roms all this patch fixes the bug. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-30build/boot/roms: move help() to bottom of fileLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-27move build/command/options to include/option.shLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-27build/release/roms: simplify strip_rom_image()Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25build/grub/*: move common strings to variablesLeah Rowe
also general cleanup of these scripts Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25build/grub/payload: split up main()Leah Rowe
also: the grub-mkstandalone command didn't have a || at the end, even though it did specify an err call. This has been corrected, so that the command now defers to err() under fault conditions. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25Update email address for Leah Rowe copyrightsLeah Rowe
also, some of them were out of date; years now updated. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-25Use SPDX license headers on all scriptsLeah Rowe
This results in much cleaner copyright and license declarations. SPDX headers are legally recognised and make auditing easier. Also, remove descriptions of each script, from each script. Libreboot documentation at docs/maintain/ describes them. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-16merge serprog scriptsRiku Viitanen
13 sloc reduction Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-12rel/src: fix multi-line commandLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-12serprog: list available boardsRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11fix typo serprog -> vserprogRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11make libopencm3 correctlyRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11make clean libopencm3Riku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11download and copy serprog related srcRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-11clean up pico-serprog for releaseRiku Viitanen
moved cmake files into a separate build directory. this can just be deleted for the source release. might as well use cmake for the actual build too. that makes repeated builds faster for some reason. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-10make clean stm32-vserprog for releaseRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-10build/release/src: be more thorough deleting .gitLeah Rowe
a few were missed. nuke all of it from orbit. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: delete elf/ in srcdirLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: remove cbutils/ in srcdirLeah Rowe
the builds were being created within that srcdir, because build/release/src runs lbmk commands within it, and one of them is building (re-building) it. there's no point addressing this, other than rm -Rf Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: remove errant codeLeah Rowe
the main lbmk script already creates these files, and these files are then copied by build/release/src so we don't need to re-create them here Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/roms: use -T0 on serprog tarballsLeah Rowe
xz supports using multiple threads so use multiple threads Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/boot/roms stragglers: properly handle errorsLeah Rowe
there were a few missing err calls i actually went through all of lbmk and found no instances where err calls were missing except in build/boot/roms_helper Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-10build/release/src: re-create symlinks, don't copyLeah Rowe
if you copy a symlink, you create a whole new file with the contents of what that symlink points to. what we need to do instead is re-create the symlinks. this is relevant for all symlinks to the main lbmk script, from the main directory of lbmk.git. this avoids there being multiple copies of the main lbmk script, in release archives. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09scripts: use printf, not echo, where appropriateLeah Rowe
printf has more universal behaviour, across various implementations of sh, so it's better to use this. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09scripts: better handling of printf: stdout/stderrLeah Rowe
in some cases, messages that should be considered errors or warnings, were being written to the standard output, rather than written as error messages. also: one or two printf statements should specifically avoid printing errors (to any file); in these cases, stdout has been redirected to /dev/null Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09build/release/roms: remove errant line breakLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09use sha512sum to check downloads, not sha1sumLeah Rowe
sha-1 has known collision issues, which may not be readily exploitable yet (in our context), but we should ideally use a more secure method for checking file integrity. therefore, use sha-2 (sha512sum) for checking files. this is slower than sha-1, but checksum verification is only a minor part of what lbmk does, so the overall effect on build times is quite negligible. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09Merge pull request 'Add stm32-vserprog' (#129) from Riku_V/lbmk:stm32 into ↵Leah Rowe
master Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/129
2023-09-09Add stm32-vserprogRiku Viitanen
Tested on a Nucleo-F042K6. That has an onboard stlink: `st-flash --format ihex write bin/serprog_stm32/serprog_nucleo-f042k6.hex` The usb port used for flashing is separate, its is exposed on the pin header instead. Check boards/nucleo-f042k6.h for usb pinout. Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-09build/boot/rom: only insert scan.cfg if neededLeah Rowe
where it is set to "both" (grub_scan_disk), inserting scan.cfg is superfluous, because grub.cfg defaults to both anyway, unless otherwise specified by scan.cfg, and only if that file exists within cbfs. thus, save a bit of build time (only a slight saving) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09build/boot/roms: delete tmpcfg when doneLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-09set grub.cfg timeout to 5s (10 on some boards)Leah Rowe
target.cfg can now specify e.g. grub_timeout=20 this would then be inserted as timeout.cfg in cbfs, containing the instruction: set timeout=20 HP laptops need a bit of extra time, due to the delay caused by the EC bug workaround deployed in GRUB desktops in general need extra time. this too is set to 10s, like the HP laptops. only insert timeout.cfg if actually needed (declared in target.cfg), otherwise grub.cfg will default to 5s Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-08Build pico-serprog binary release archiveRiku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-08Build for all pico board, not just the "original"Riku Viitanen
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
2023-09-05build/release/roms: use tmp/romdir, not TMPDIRLeah Rowe
we must conserve memory usage, in the event that the user's /tmp is a tmpfs. copying of ROM images into tmpfs is ill advised; we must copy them, due to how the release process works (e.g. stripping of blobs, but this must be done in a way so as to not interfere with regular builds, thus they are copied instead) Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-05grub: make backgrounds configurable in target.cfgLeah Rowe
now under coreboot mainboards, target.cfg can specify a background. if not specified, the 1280x800 one is assumed, and used by default. it can be overridden. the path should be relative to: config/grub/background/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04build/release/roms: fix ucode handlingLeah Rowe
microcode_required wasn't being reset per target, leading to unreliable results. this fixes that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04build/release/roms: simplify defcongic handlingLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04build/boot/roms: don't create empty bin/ directoryLeah Rowe
also: only return zero status if rom images were succesfully built, and print a list of each rom image directory based on what was actually compiled, rather than just saying that the rom images are stored under bin/ Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04add checkversion to build/release/srcLeah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04merge config/ and resources/Leah Rowe
Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-09-04move ifd/gbe configs into config/ifd/Leah Rowe
it doesn't really make sense for them to be under blobs/ - nominally, they are blobs, but they are well-understood data files containing config data, that is easily parsed by tools like ich9show or ifdtool (and tools like bincfg or nvmutil) blobs/ has been re-purposed: this directory no longer exists in lbmk, but it is created (and on .gitignore) when needed, by blobutil thus, the blobs/ directory shall only contain vendor files, and only those files that libreboot scrubs from releases. therefore, build/release/src can (and has been) simplified; it currently copies just the ifd and gbe files from blobs/, selectively, and this logic is quite error prone, requiring maintenance. now, the build/release/src script simply copies config/ (which only ever contains distributable files) and entirely ignores the blobs/ directory the blob download script already creates the required directory, except for the sch5545 download; this is now fixed lbmk code size is slightly smaller, due to this patch Signed-off-by: Leah Rowe <leah@libreboot.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-10 20:26:31 +0000