| Age | Commit message (Collapse) | Author |
|---|
|
lbmk didn't quote certain arguments in commands, or
used ! -z instead of -n, things like that. simple fixes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
most of these are probably redundant, and will never
be called, but lbmk needs to be as safe as possible
under fault conditions. fail early, fail hard.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in cases where lbmk must always return from a function,
there are some cases where it relies on non-zero exit
status, which in practise is always the case, but may
change in the future if the relevant part is modified
e.g. do_something && return 0
the proper form is:
do_something
return 0
also do this for unconditional exits
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it didn't work in the past, but it does work nowadays;
specifically, it only worked with libgfxinit in the past,
but not on VGA ROMs.
now it does work on VGA ROMs, tested on e6400 and t1650 so
it was enabled there.
in this setup, a special image is provided where SeaBIOS is
the main payload, but it only loads GRUB; nothing else, every.
this is called SeaGRUB. this setup is useful in cases where
the user only has a GPU that lacks libgfxinit support.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
when printing the name of the rom being created, it's
done before the check to rename based on vendorfiles
in target.cfg. this patch fixes that bug.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it wasn't being copied right
the roms under elf/ were being copied, but not the ones
under bin/ - i need to audit it further
for now, i run modify_coreboot_roms from build/roms
instead of update/trees
so, the ones under elf/ no longer have bootblocks copied.
it's only done in bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
when building only for u-boot, the current script
works just fine. however, when building for other
payloads in additional to u-boot, the final u-boot
stage fails because other payloads are already
inserted via cbfs.
when we build u-boot, we do that last because we want
u-boot setups to only be u-boot, nothing else.
this patch enables qemu x86 to build properly with
u-boot.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
keymaps weren't being set in keymay.cfg of cbfs, due
to use of x_ in the rom script, and x_ doesn't handle
quotes or spaces in arguments well.
i'm going to remove use of x_ and xx_ (it's in my todo),
for next release.
for now, hot patch the release. i've gone through and
replaced use of x_ with || err, in some places.
not just the keymap.cfg command, but others too. in case
there are more issues we missed.
this commit is being tagged "20231021fix" and i'm using
this tag to re-build the 20231021 release. i'll just
replace the tarballs in rsync and add errata to the news
page announcing the release. all i did was break peoples
umlauts, i didn't brick their machines fortunately!
very minor bug. anyway, x_/xx_ is a great idea, but sh
isn't really designed for that style of programming. i'll
go back to using just || err in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
don't ever name it rpi-pico-serprog
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
as opposed to the current 3-level structure.
recent build system simplifications have enabled
this change, thus:
./build fw coreboot -> ./build roms
./build fw grub -> ./build grub
./build fw serprog -> ./build serprog
./update project release -> ./update release
./update project trees -> ./update trees
./update vendor download -> ./vendor download
./update vendor inject -> ./vendor inject
alper criticised that the commands were too long,
so i made them shorter!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
move it all to other files where items are used, and not
used anywhere else. this reduces the size of vendor.sh.
also remove a few redundant variables, or variables that
are not meaningfully used.
a few items have been moved to include/option.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The "u-boot.bin" file generated by U-Boot builds is a raw binary. When
adding payloads to a CBFS, we need to use ELF files with add-payload
or manually pass the entry point and load address of the payload binary
with add-flat-binary.
We primarily use the "u-boot.elf" which gets build with the REMAKE_ELF
option, as it also has the necessary device-tree binary that U-Boot
usually needs to work. When the option is not set (e.g. for QEMU), we
need to use the "u-boot" file which is an ELF.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's sometimes done unconditionally. this change
ensures that it is not repeated needlessly.
i observed otherwise that cbfstool would be
re-built from time to time, even if it was built.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
also rename elf/coreboot to something scary
some users were flashing roms built under elf/, which
lack payloads. lbmk builds no-payload roms (and payloads)
under elf/ then inserts them, creating full (flashable)
images under bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
some users reported build errors. technically, there's
nothing wrong with lbmk but it relies on hostcc, and
hostcc is hit or miss when it comes to cross compiling
32-bit, depending on the build system of whatever project.
lbmk needs to handle cross compilation. for now, i'm just
disabling memtest86plus on non-64-bit hosts.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the script used to be called once per target, now it
handles every target. the grub background image wasn't
being set, so if it changed at build time, it would
stay changed.
keep the default in place for each run, while still
allowing target.cfg files to change it per target.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Just one script.
Just one!
Well, two, but the 2nd one already existed:
logic in update/project/trees and
update/project/repo was merged into
include/git.sh and update/project/build
was renamed to update/project/trees; an -f
option was added, which calls the functions
under git.sh
so git clones are now handled by the main build
script (for handling makefiles and defconfigs)
but the logic there is a stub, where git.sh
does all the actual heavy lifting
this cuts the file count down by two, and reduces
sloccount a reasonable amount because much of
the logic already exists in the build script, when
it comes to handling targets. git.sh was adjusted
to integrate with this, rather than act standalone
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
otherwise, if src/grub/ was already compiled, this
would not print anything on the screen. however, the
files will have been created under elf/grub
this message just makes lbmk a bit more user friendly
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This eliminates an additional subdirectory.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this is far less error-prone
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The benefit now is that it can be cleaned. E.g.
./update project build -b coreboot utils
./update project build -b coreboot utils default
./update project build -c coreboot utils
./update project build -c coreboot utils default
the update/project/build script checks when arguments
are provided after the project name. if the first one
is "utils", then it acts in the same way as the old
build/coreboot/util script
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's buggy. "./build fw coreboot" was made to work,
but it caused lots of unknown issues when mixing other
args
the old way wasn't broken. now, once again, you must
pass the "all" argument. e.g.:
./build fw coreboot all
Also, the confirmation messages at the end are a bit
clearer, when listing which ROM images were compiled.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in the future, we may start downloading files that aren't
blobs, such as mxm port configs (on mainboards that use
MXM graphics)
this directory will contain all of those files
generally change the language used, across lbmk, to make
use of "vendorfile" instead of "blob"
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
build/release/src was partly re-written to accomodate this
memtest86plus was patched to have a central Makefile, and
lbmk modified to use that, rather than mess with build32
and build64. the central Makefile just builds both targets
or cleans both targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
return with error status if no images were compiled
if a rom image fails to compile, then it will also
exit with error status, but sometimes you can pass
argument "cros" or "default", and it would not give
you rom images due to no target.cfg files, but these
are also ignored because of that.
this restores the same behaviour that existed before,
for this final error check.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
with no argument specified, it is now possible to build
every rom image.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
./build boot roms is now: ./build firmware coreboot
./build fw serprog is now: ./build firmware serprog
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Just one script.
Just one.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
for the first time ever, this is a single script.
with recent simplifications in how variables are
handled, and techniques i've developed during
auditing, it's now feasible design-wise for this
to be a single script, without a helper script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
call these as functions, instead of executing scripts
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
At the end of the function, this script will now
run itself again if there are more arguments. This
enables the following:
./handle make file -c project1 project2 project3
Whereas previously, it could only do this:
./handle make file -c project1
Substitude -b and it's the same.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the file check is sufficient (target.cfg)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
slight sloccount reduction. light renaming of
functions between the two scripts, placing more
logic in main() under include/boot.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
errors are not defined for mktemp, and the /tmp file
system should be assumed reliable.
if /tmp is *unreliable*, then this is not something that
lbmk either can or should fix; the user clearly has
bigger problems.
manpages for mktemp do not define errors. it is assumed
to be completely reliable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Instead of having detailed error messages, run most
commands through a function that calls err() under
fault conditions.
Where detail is still required, err() is still called
manually. Where it isn't, the error message is simply
whatever command was executed to cause the error.
This results in a massive sloccount reduction for lbmk;
specifically, 178 sloc reduction, or a 8.1% reduction.
The total sloccount is now 2022, for shell scripts.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
