| Age | Commit message (Collapse) | Author |
|---|
|
at present, lbmk can remove microcode updates on images for
a given target, if the target specifies
microcode_required="n" in target.cfg
lbmk then provides images with microcode, and images without,
in a given release. although the user can also remove them
manually, this just makes it a bit more convenient, for those
users who do wish to run without the updates. this functionality
is provided only on those platforms where no-microcode is tested.
well, this behaviour implements a compromise on libreboot policy,
which is to always include microcode updates by default. see:
Binary Blob Reduction Policy
the *canoeboot* project now exists, developed in parallel with
libreboot, and it ships without microcode updates, on the same
targets where lbmk also handled this.
running without microcode updates is foolish, and should not
be encouraged. clean up lbmk by not providing this kludge.
the libreboot documentation will be updated, telling such users
to try canoeboot instead, or to remove the update from a given
libreboot rom - this is still possible, and mitigations such as
PECI disablement on GM45 are still in place (and will be kept),
so that this continues to work well.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
don't handle "romtype" at all, in board target.cfg files
add /dev/null as pike2008 rom on amd boards. this serves
the same purpose, adding them as empty vga roms, to add
an empty rom in cbfs. pike2008 cards cause seabios to hang,
when their oproms are executed, so we insert a fake rom
on i945 thinkpads, use the coreboot config option:
CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK
when set, this enables the same bootblock copy, for use
with bucts. these two cases, namely pike2008 roms and
i945 bootblock copies, no longer need to be handled in code
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
all it did was set -v in the shell, which doesn't yield
very useful results. this is a relic of very old design
in the libreboot build system, that is no longer needed.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lbmk didn't quote certain arguments in commands, or
used ! -z instead of -n, things like that. simple fixes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in cases where lbmk must always return from a function,
there are some cases where it relies on non-zero exit
status, which in practise is always the case, but may
change in the future if the relevant part is modified
e.g. do_something && return 0
the proper form is:
do_something
return 0
also do this for unconditional exits
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it didn't work in the past, but it does work nowadays;
specifically, it only worked with libgfxinit in the past,
but not on VGA ROMs.
now it does work on VGA ROMs, tested on e6400 and t1650 so
it was enabled there.
in this setup, a special image is provided where SeaBIOS is
the main payload, but it only loads GRUB; nothing else, every.
this is called SeaGRUB. this setup is useful in cases where
the user only has a GPU that lacks libgfxinit support.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
when printing the name of the rom being created, it's
done before the check to rename based on vendorfiles
in target.cfg. this patch fixes that bug.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it wasn't being copied right
the roms under elf/ were being copied, but not the ones
under bin/ - i need to audit it further
for now, i run modify_coreboot_roms from build/roms
instead of update/trees
so, the ones under elf/ no longer have bootblocks copied.
it's only done in bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
when building only for u-boot, the current script
works just fine. however, when building for other
payloads in additional to u-boot, the final u-boot
stage fails because other payloads are already
inserted via cbfs.
when we build u-boot, we do that last because we want
u-boot setups to only be u-boot, nothing else.
this patch enables qemu x86 to build properly with
u-boot.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
keymaps weren't being set in keymay.cfg of cbfs, due
to use of x_ in the rom script, and x_ doesn't handle
quotes or spaces in arguments well.
i'm going to remove use of x_ and xx_ (it's in my todo),
for next release.
for now, hot patch the release. i've gone through and
replaced use of x_ with || err, in some places.
not just the keymap.cfg command, but others too. in case
there are more issues we missed.
this commit is being tagged "20231021fix" and i'm using
this tag to re-build the 20231021 release. i'll just
replace the tarballs in rsync and add errata to the news
page announcing the release. all i did was break peoples
umlauts, i didn't brick their machines fortunately!
very minor bug. anyway, x_/xx_ is a great idea, but sh
isn't really designed for that style of programming. i'll
go back to using just || err in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
as opposed to the current 3-level structure.
recent build system simplifications have enabled
this change, thus:
./build fw coreboot -> ./build roms
./build fw grub -> ./build grub
./build fw serprog -> ./build serprog
./update project release -> ./update release
./update project trees -> ./update trees
./update vendor download -> ./vendor download
./update vendor inject -> ./vendor inject
alper criticised that the commands were too long,
so i made them shorter!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
