summaryrefslogtreecommitdiff
path: root/resources
AgeCommit message (Collapse)Author
2022-12-10u-boot: Add qemu_arm64_12mb boardAlper Nebi Yasak
Add a U-Boot payload build for the QEMU AArch64 virtual machine. The config is same as upstream "qemu-arm64" defconfig, but SYS_TEXT_BASE is set to 0x50000000 so that it doesn't conflict with coreboot. QEMU auto-generates and passes a device-tree file to U-Boot at runtime, there's no compile-time canonical version, so there's no need to set REMAKE_ELF or OF_EMBED. It's not immediately obvious if QEMU-specific drivers are available to support display output, but most coreboot integration is unavailable (depends on x86) and entire video subsystem is disabled in the U-Boot upstream defconfig. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10coreboot: qemu_x86_12mb: Enable DRIVERS_UART_8250IOAlper Nebi Yasak
U-Boot doesn't run on this board when this SuperIO serial driver is disabled. Enable it. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Add qemu_x86_12mb buildAlper Nebi Yasak
Add a U-Boot build for the qemu_x86_12mb board. The config is a copy of the upstream "coreboot" defconfig, but with OF_EMBED=y. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10build/roms: Support using "u-boot" ELF file as U-Boot payloadAlper Nebi Yasak
U-Boot runtime configuration is done with a device-tree file, which is built alongside the executable in the upstream build system, and must be available to U-Boot at runtime. This device-tree is normally not linked into the default "u-boot" ELF file. So far we have been handling it by re-creating a "u-boot.elf" from the raw binary parts by setting REMAKE_ELF, and using that as the coreboot payload. Unfortunately, that fails to build for x86 boards, more specificly the "coreboot" boards upstream. It's also possible (but discouraged) to set OF_EMBED to embed the device-tree file into the U-Boot itself, in which case we could use the "u-boot" file as the payload on the "coreboot" boards. Add support for using the "u-boot" file as the payload if "u-boot.elf" doesn't exist. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Add video damage tracking patch seriesAlper Nebi Yasak
Add a series posted to upstream mailing lists that makes the GRUB text-mode console faster by implementing video damage tracking [1]. Refresh the config files to include its new VIDEO_DAMAGE Kconfig. Patch 7/7 upstream has a tiny conflict with "Improve UEFI experience" series we already have, but it's only in the diff context. No changes other than fixing that. [1] https://lore.kernel.org/u-boot/20220609225921.62462-1-agraf@csgraf.de/ Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Set default revision to v2022.10Alper Nebi Yasak
Set revision to the commit hash of the v2022.10 release, and run "make olddefconfig" for all boards to refresh the configs. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Use a common treeAlper Nebi Yasak
Merge all boards into a common "default" tree, currently for v2022.07. This ends up applying the "Improve UEFI experience on DM_VIDEO" series to everything, so refresh the configs for the new options. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10build/roms: Don't rebuild crossgcc if it was already builtAlper Nebi Yasak
The roms_helper script skips building crossgcc-i386 if its target directory exists. Skip it for other architectures as well. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10build/roms: Make coreboot crossgcc usable for payloads and modulesAlper Nebi Yasak
Add the coreboot-built cross-architecture toolchains to the PATH so that modules and payloads can use them. When building for a foreign-arch board, also export CROSS_COMPILE pointing to the appropriate prefix. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10build/roms: Build 32-bit crossgcc for AArch64 as wellAlper Nebi Yasak
This re-applies commit a69855f7e448 ("Build 32-bit crossgcc for AArch64 as well") which was inexplicably reverted along with unrelated changes. Mention in a comment that building crossgcc-arm is necessary for AArch64. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10build/roms: Don't build Memtest86+ when not specified by cmdlineAlper Nebi Yasak
When overriding which payloads will be built with the -p command line argument, the roms_helper script builds the Memtest86+ payload before checking if it should be disabled. Move the build command after the command line override. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10build/roms: Disable U-Boot when not in payloads specified by cmdlineAlper Nebi Yasak
When overriding which payloads will be built with the -p command line argument, the roms_helper script doesn't disable the U-Boot payload. Disable it in this case. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-09download/u-boot: Change to download target before running extra.shAlper Nebi Yasak
The U-Boot download script does its work from the repository root instead going into the newly created dirs, unlike the coreboot counterpart. It should run the board-specific extra.sh files with the downloaded paths as their working directory. Do so by a subshell. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-09download/u-boot: Re-add usage text for no-argument formAlper Nebi Yasak
The no-argument form of the U-Boot download script prepare trees for all boards when run with no arguments, like the corresponding script for coreboot. The usage text for this case was removed without any changes to the corresponding code, assume it was by mistake and add it back. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-09download/u-boot: Remove support for deleting git foldersAlper Nebi Yasak
Removing the git dirs was part of deblobbing, which Libreboot no longer cares about. The variable that triggers it is no more. Remove the dead code. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-05build/release/roms: delete ME/MRC firmware in ROMsLeah Rowe
2022-12-05build/boot/roms: remove errant codeLeah Rowe
2022-12-05remove errant detail from commentLeah Rowe
2022-12-05delete build/release/u-boot-libreLeah Rowe
this is a hangover from pre-osboot-merge libreboot. the idea was to distribute fsdg uboot archives lbmk has uboot support, and releases will simply include uboot in the main src archive like with everything else
2022-12-05remove logic for avoiding nonredistributable blobsLeah Rowe
the --nuke option in ifdtool will be used instead, to nuke the ME regions in specific rom sets (and cbfstool will be used to delete mrc.bin files from rom sets) the new method being implemented is heavier on disk io, but simplifies lbmk, and disk io could still be optimised in the following ways: * when copying roms from boards with ME in them, use ifdtool --nuke to get filename.rom.new, and *move* (not copy) filename.rom.new to the new destination (for use with tar) * possibly modify ifdtool to make efficient use of mmap for disk i/o; it currently loads entire roms into an allocated buffer in memory
2022-12-04coreboot/default: add --nuke flag to ifdtoolLeah Rowe
e.g. ./ifdtool --nuke me coreboot.rom this will be used by rom release build scripts, to scrub stuff like intel me from the rom
2022-11-29scripts: avoid relying on spaces from sha1sum outputAlexei Sorokin
2022-11-29coreboot: hide MEI on neutered-ME targetsAlexei Sorokin
2022-11-29Merge branch 'master' of Arsen/lbmk into masterLeah Rowe
2022-11-28t430_12mb: Add, based on x230_12mbArsen Arsenović
These boards are near-identical, this appears to suffice.
2022-11-28coreboot: add x230edp_12mb, remove x230fhd_12mbAlexei Sorokin
New x230edp_12mb target uses the https://review.coreboot.org/c/coreboot/+/28950 patchset to add an X230_EDP target to the default coreboot branch. Consequently the "fhd" coreboot branch is no longer needed and has been safely removed.
2022-11-26Merge branch 'dev' of shmalebx9/lbmk into masterLeah Rowe
2022-11-26fix injection scriptshmalebx9
2022-11-26added more checks and optimised extraction scriptshmalebx9
2022-11-24Merge branch 'qemu' of shmalebx9/lbmk into masterLeah Rowe
2022-11-22build/roms: remove seabios_grubfirst logicLeah Rowe
the intended use-case scenario was one in which vga rom initialisation would be used, on desktop configurations, but without coreboot itself handling vga rom initialisation, instead leaving that task to seabios it was assumed that grub, when running on the bare metal with build option "--with-platform=coreboot" would be able to display like this, but it is not so when tested in such setups (add-on gpu with grub payload), it is necessary to extract the video bios and insert it into the coreboot rom, having coreboot handle such execution. this is beyond the scope of lbmk, in context of automated building, because we cannot reliably predict things such as PCI IDs do away with this build option entirely, for it does not serve the intended purpose. it will be necessary to run PC GRUB instead (build option --with-platform=i386-pc). PC GRUB can still read from CBFS, and you could provide it as a floppy image file inside CBFS for SeaBIOS to execute. in this setup, GRUB would function as originally intended by the seabios_withgrub option; such a configuration is referred to as "SeaGRUB" by the libreboot project, and experimentation was done with it in the past, to no avail it's better to keep things simple, in the libreboot project. simpler for users, that is
2022-11-20add smort failures to blob download scriptshmalebx9
2022-11-19added x86 qemu board based on x230 coreboot configshmalebx9
2022-11-19remove duplicate patch causing build errorLeah Rowe
2022-11-19bump grub revision to latest upstreamLeah Rowe
gnulib too gnulib...
2022-11-19dependencies/arch: notice about unifont dependencyLeah Rowe
2022-11-19also fix crossgcc on cros/fhd coreboot treesLeah Rowe
2022-11-19cros devices: use a common coreboot treeLeah Rowe
2022-11-19remove kfsn4-dre, kcma-d8 and kgpe-d16Leah Rowe
buggy, buggy, buggy, buggy, buggy, buggy, buggy full of bugs, these boards never worked properly. i got ripped off with these. now i'm ripping off the band aid use dasharo if you want d16 stuff. i'm done with it.
2022-11-19fix gnat build issue on coreboot repositoriesLeah Rowe
backported from newer coreboot revisions, see patch coreboot/default/patches/0014-coreboot-default-fix-crossgcc-build.patch
2022-11-19add innoextract to federa dependency scriptLeah Rowe
2022-11-19ditto othersLeah Rowe
2022-11-19ditto debian scriptLeah Rowe
2022-11-19remove stupid flags from arch dependency scriptLeah Rowe
2022-11-19build/dependencies/*: remove python2Leah Rowe
python2 is eol and the only thing that needed it was build scripts inside tianocore, back in osbmk days when tianocore was supported in the (osboot) build system. nothing else requires it, so chuck it
2022-11-17assimilate nvmutilLeah Rowe
2022-11-16make background splash screen purpleLeah Rowe
to match the assimilated osboot, which had purple colours
2022-11-14blobs/inject: use nvmutil, not nvmutilsLeah Rowe
2022-11-14pragmatic system distribution guideline compliancepsdgLeah Rowe
osboot is now part of libreboot, and will soon shut down. libreboot now conforms to osboot policy.
2022-08-29u-boot: Add peach pi chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the Samsung Chromebook 2 13", also known as "peach-pi" in the U-Boot upstream defconfigs. It uses the shared tree for the "peach" baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the peach pi chromebook. Note the there doesn't seem to be any coreboot support for this chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>