| Age | Commit message (Collapse) | Author |
|---|
|
the logic can now more or less be read chronologically
|
|
logic will be split from main into smaller
functions, in follow-up commits
|
|
users reported it doesn't boot in recent releases, with the
february 2023 coreboot revision update
i have one in the lab, i'll just re-test it and fix whatever's
wrong for a future release
|
|
python 3 is default now, in all the distros
specifically calling "python3" often doesn't work anymore
python2 is obsolete
let python2 die
|
|
consolidated some for loops
removed errant code
|
|
|
|
|
|
|
|
No more than 80 characters per line.
|
|
|
|
previously, "normal" initmode relied on the vgarom-based
seabios config, which enables option roms, but then lbmk
would insert pci-optionrom-exec 0 for vgarom, and 2 for normal
in libreboot, coreboot roms with "vgarom" in the filename do
pci option rom execution from coreboot, and "normal" roms
do execution from seabios(where seabios is the only payload
provided on normal setups)
this is because payloads like grub can also be used, on vgarom
setups, where coreboot must handle oprom execution
|
|
|
|
For Nvidia GPU models of Dell Latitude E6400
|
|
This updates the dell_inspiron_1100.py script from Python 2 to 3 for
better compatibility (some distros have dropped Python 2), and adds
special handling so that it works with the Latitude E6400 BIOS.
These have also been sent upstream, so these patches can be dropped
once they are merged:
https://review.coreboot.org/c/bios_extract/+/74975/
https://review.coreboot.org/c/bios_extract/+/74976/
https://review.coreboot.org/c/bios_extract/+/74977/
|
|
nobody will bother to upgrade the flash on those machines
not much point maintaining the 8/16mb versions
might aswell do just the _4mb version
|
|
|
|
|
|
the deleted patch (in this commit) was written to fix an
issue theoretically; it hasn't been fully tested, and some
people have reported strange issues since this patch was
merged - there is no proof that this patch causes them, but
removing this patch is the correct thing to do regardless
|
|
|
|
|
|
|
|
|
|
from Riku_V/lbmk:parabola into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/13
|
|
|
|
|
|
i downloaded this file from git manually at some point,
when rebasing changes (i think it was the ec ones)
the logic in the file is correct but i forgot to mark
it executable
without this commit, lbmk fails utterly, on all the newer
intel boards
|
|
|
|
This reverts commit fe2b72035fb58d2c0792daa62aa346da710f04a3.
The GRUB patch to fix the E6400 broke other systems and has been
reverted. As a result, GRUB needs to be disabled again on the E6400
until a better fix has been created.
|
|
This reverts commit 1497ae045104145de677fd151da4de6e92be4e5a.
The blanket GRUB patch seems to break PS/2 keyboard handling across
other platforms, so revert it.
|
|
This reverts commit 7bc4dc32ac3e430e50ace3a2876cf501f647b89f.
The E6400 keyboard should work in GRUB now so we can reenable it.
|
|
This introduces a patch to grub which disables the coreboot
specific handling, allowing PS/2 keyboards to be handled the
same as i386-pc. However this alone breaks the keyboard in
Linux, requiring coreboot to perform PS/2 initialization.
I think GRUB may be restoring the original configuration of
the PS/2 controller once it exits, and if coreboot doesn't
initialize the controller then it's restored to the default
state which Linux doesn't seem to like. I think the emulated
keyboard interface provided by the EC on the E6400 behaves
in a non-standard way that is incompatible with the old
coreboot specific handling.
|
|
ps/2 internal keyboard faulty in grub target
i386-coreboot, according to nic3-14159
normal i386-pc grub (bios grub) is fine,
booted from seabios
it is being investigated
|
|
Tested the 4MiB ROMs but not the 8 or 16 MiB ones. This uses the same
board.cfg as the GM45 ThinkPads with an IFD+GBE from ich9gen.
Known issues:
- The internal keyboard does not work properly in GRUB. It seems like
the keyboard controller is outputing set 1 (XT) scancodes, but GRUB
is interpreting them as set 2 (AT) scancodes. This may also have
something to do with scancode translation. However, the keyboard works
fine in SeaBIOS and Linux. USB keyboards also work properly.
- The subsystem IDs in the GBE region are hardcoded for a Thinkpad in
ich9gen, though this doesn't seem to cause issues in Linux. The vendor
IFD and GBE region do have some differences from the generated
binaries, though they do not appear to be critical.
|
|
libreboot will still include microcode updates
by default, but mitigations against broken speedstep
and reboot (when microcode updates are excluded) were
removed following the merge with osboot
this patch restores those mitigations; the patch
reverts coreboot to older smrr code (which works fine, it
isn't critical to use the new behaviour) and disables peci
(pointless feature)
i'll probably re-tool this later to apply the changes
conditionally to whether ucode is present
this is not a change in policy. policy says:
include cpu microcode updates by default
policy also says:
libreboot must be configurable
microcode removal via cbfstool remove -n, counts as
configuration, and in practise is not possible on
gm45 patches in current libreboot; this patch corrects
that problem, allowing the machines to work somewhat
well (same stability issues as before, like MCE errors
resulting in kernel panic on high CPU/memory usage,
but i digress)
happy... hacking
|
|
|
|
|
|
This is useful for e.g. HP EliteBook 2560p.
In coreboot config, enable e.g. (for lbmk blobutil):
CONFIG_KBC1126_FW1="../../ec/hp2560p/ec.bin.fw1"
CONFIG_KBC1126_FW2="../../ec/hp2560p/ec.bin.fw2"
In resources/blobs/sources you would have these entries:
EC_url
EC_url_bkup
EC_hash
|
|
|
|
In cases where the vendor update file contains a full
ROM image encompassing IFD+GbE+ME+BIOS, blobutil was
saving the *entire* ROM containing those, as me.bin.
For example, if it's an 8MB ROM, blobutil would create
a me.bin file that is actually the whole ROM containing:
* Vendor IFD region
* Vendor GbE(if it has one)
* Vendor ME region
* Vendor BIOS region
This fix tries with -M and -O first. In this combination,
me_cleaner shall extract me.bin (neutered) and save it.
If that fails, then the normal method with just -O is
tried, which by this logic would always be a lone ME
image if it succeeds.
I tested downloading ME images on existing boards with
this, and it didn't break them, and this fixes the bug.
This is done for HP 8200 SFF which Riku_V is adding to
lbmk. I'm on IRC with Riku_V as I write this commit
message! Super hot hotfix patch.
|
|
|
|
This fixes errors when running that script.
|
|
bl1 bootloader blobs needed, and lbmk doesn't currently
auto-download these for insertion, so their presence in
the build system is problematic because people might build
these and think they work - they don't, due to the lack of
those bl1 blobs
notes about this are included in lbwww, on the compatibility
list. these can be re-added and tested later, when lbmk handles
those bl1 bootloader blobs
|
|
u-boot is known broken on these, last revision
known working is 2021.01
can bisect and find the fix. i'm putting this on
the issue tracker (new one on codeberg)
|
|
|
|
|
|
don't download it. keep it in lbmk.
libreboot moved to codeberg for git hosting,
and i didn't want to keep lugging around an
extra git repo just for one tiny project.
|
|
i overlooked this one. the normal one was removed,
due to boot issues with the board. i need to look
at this board before re-adding it to libreboot
|
|
always use tabs
|
|
|
|
|
