summaryrefslogtreecommitdiff
path: root/resources/u-boot
AgeCommit message (Collapse)Author
2023-08-16merge coreboot/u-boot download logic to one scriptLeah Rowe
they are fundamentally the same, in an lbmk context. they are downloaded in the same way, and compiled in the same way! (Kconfig infrastructure, board-specific code, the way submodules are used in git, etc) ~200 sloc reduction in resources/scripts the audit begins Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-06-22u-boot: Increase EFI variable buffer sizeAlper Nebi Yasak
Debian's signed shim allocates too many EFI variables to fit in the EFI variable memory buffer. Normally it would then try to continue booting in non-secure-boot mode, but its error handling throws a synchronous abort that reboots the board, making it impossible to boot into Debian unless one manually loads GRUB instead of shim. Increase EFI variable buffer size to avoid triggering the bug. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-06-20nuke boards: delete nyan* (for now)Leah Rowe
not well-tested, and existing testing has revealed video issues on some of them (or just no boot) for now, retain only qemu and gru-* on arm Signed-off-by: Leah Rowe <leah@libreboot.org>
2023-04-09remove daisy and peach boards (todo: re-add)Leah Rowe
bl1 bootloader blobs needed, and lbmk doesn't currently auto-download these for insertion, so their presence in the build system is problematic because people might build these and think they work - they don't, due to the lack of those bl1 blobs notes about this are included in lbwww, on the compatibility list. these can be re-added and tested later, when lbmk handles those bl1 bootloader blobs
2023-04-09remove veyron boards temporarily (will re-add)Leah Rowe
u-boot is known broken on these, last revision known working is 2021.01 can bisect and find the fix. i'm putting this on the issue tracker (new one on codeberg)
2023-02-14u-boot: Disable environment storageAlper Nebi Yasak
U-Boot can be configured via environment variables which can be saved to various storage devices. This usually defaults to MMC or SPI depending on where it boots from, but assumes the device's layout is controlled by U-Boot. We should store the environment in SPI flash, but we also need to configure coreboot FMAPs to reserve the area U-Boot would use as its environment storage. For now, disable environment storage by setting ENV_IS_NOWHERE=y to avoid overwriting random regions of SPI or MMC if someone tries to save the variables. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-02-14u-boot: Update to v2023.01Alper Nebi Yasak
Set default U-Boot revision to v2023.01 and rebase patches on top of that. Upstream kconfig status is a bit unstable, so updating configs with `make oldconfig` would miss important upstream changes. For each board, run `make savedefconfig` and `diffconfig -m` at the old version to get a diff from upstream defconfigs. Fix those affected by upstream changes, like SYS_TEXT_BASE being renamed to TEXT_BASE. Then append those to the new version's defconfigs and run `make olddefconfig` to get updated configs. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2023-01-10Merge branch 'veyron-uboot-dmreset' of alpernebbi/lbmk into masterLeah Rowe
2022-12-31u-boot: Enable USB_EHCI_EXYNOS on peach boardsAlper Nebi Yasak
The USB 2.0 ports on Exynos boards need the relevant driver enabled by USB_EHCI_EXYNOS. This is enabled by default depending on USB_EHCI_HCD. It's already enabled on snow and spring, but apparently not on peach boards, as discovered from other people's attempts to enable it [1][2]. Enable it also on the peach_pi and peach_pit. [1] https://gitlab.com/exynos5-mainline/u-boot/-/commit/8f12e43dbfdebbd29f49c2cb8bf6e9b6ea7e70c9 [2] https://gitlab.com/exynos5-mainline/u-boot/-/commit/11cacf55ad720dfca8799561a38b1da4732a3018 Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-31u-boot: Enable DM_RESET for veyron boardsAlper Nebi Yasak
The display driver on the veyron boards needs reset drivers, more specifically RESET_ROCKCHIP. This is enabled by default depending on DM_RESET, which an upstream commit enables for veyron_jerry claiming it fixes the display [1]. Enable it also in our configs, but for other veyrons as well. [1] https://lore.kernel.org/u-boot/20220928024046.2657593-1-sjg@chromium.org/ Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Add qemu_arm64_12mb boardAlper Nebi Yasak
Add a U-Boot payload build for the QEMU AArch64 virtual machine. The config is same as upstream "qemu-arm64" defconfig, but SYS_TEXT_BASE is set to 0x50000000 so that it doesn't conflict with coreboot. QEMU auto-generates and passes a device-tree file to U-Boot at runtime, there's no compile-time canonical version, so there's no need to set REMAKE_ELF or OF_EMBED. It's not immediately obvious if QEMU-specific drivers are available to support display output, but most coreboot integration is unavailable (depends on x86) and entire video subsystem is disabled in the U-Boot upstream defconfig. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Add qemu_x86_12mb buildAlper Nebi Yasak
Add a U-Boot build for the qemu_x86_12mb board. The config is a copy of the upstream "coreboot" defconfig, but with OF_EMBED=y. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Add video damage tracking patch seriesAlper Nebi Yasak
Add a series posted to upstream mailing lists that makes the GRUB text-mode console faster by implementing video damage tracking [1]. Refresh the config files to include its new VIDEO_DAMAGE Kconfig. Patch 7/7 upstream has a tiny conflict with "Improve UEFI experience" series we already have, but it's only in the diff context. No changes other than fixing that. [1] https://lore.kernel.org/u-boot/20220609225921.62462-1-agraf@csgraf.de/ Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Set default revision to v2022.10Alper Nebi Yasak
Set revision to the commit hash of the v2022.10 release, and run "make olddefconfig" for all boards to refresh the configs. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-12-10u-boot: Use a common treeAlper Nebi Yasak
Merge all boards into a common "default" tree, currently for v2022.07. This ends up applying the "Improve UEFI experience on DM_VIDEO" series to everything, so refresh the configs for the new options. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-11-14pragmatic system distribution guideline compliancepsdgLeah Rowe
osboot is now part of libreboot, and will soon shut down. libreboot now conforms to osboot policy.
2022-08-29u-boot: Add peach pi chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the Samsung Chromebook 2 13", also known as "peach-pi" in the U-Boot upstream defconfigs. It uses the shared tree for the "peach" baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the peach pi chromebook. Note the there doesn't seem to be any coreboot support for this chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add peach pit chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the Samsung Chromebook 2 11", also known as "peach-pit" in the U-Boot upstream defconfigs. Also adds a shared "peach" board directory to share with others having the same baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the peach pit chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add spring chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the HP Chromebook 11 G1, also known as "spring" in the U-Boot upstream defconfigs. It uses the shared tree for the "daisy" baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the spring chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add snow chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the Samsung Chromebook - XE303, also known as "snow" in the U-Boot upstream defconfigs. Also adds a shared "daisy" board directory to share with others having the same baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the snow chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add nyan blaze chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the HP Chromebook 14 G3, also known as "nyan-blaze" but not in the U-Boot upstream defconfigs. Apparently the "nyan-big" defconfig can also work for this version. It uses the shared tree for the "nyan" baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the nyan blaze chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add nyan big chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the Acer Chromebook 13 (CB5-311, C810), also known as "nyan_big" in the U-Boot upstream defconfigs. Also adds a shared "nyan" board directory to share with others having the same baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the nyan big chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add veyron mickey chromebit configsAlper Nebi Yasak
This adds U-Boot configuration for the ASUS Chromebit CS10, also known as "chromebit_mickey" in the U-Boot upstream defconfigs. It uses the shared tree for the "veyron" baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the veyron mickey chromebit. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add veyron jerry chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for a few white-label chromebooks, known as "chromebook_jerry" in the U-Boot upstream defconfigs. It uses the shared tree for the "veyron" baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have any of the veyron jerry chromebooks. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add veyron minnie chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the ASUS Chromebook Flip C100PA, also known as "chromebook_minnie" in the U-Boot upstream defconfigs. It uses the shared tree for the "veyron" baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the veyron minnie chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add veyron speedy chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the ASUS Chromebook C201PA, also known as "chromebook_speedy" in the U-Boot upstream defconfigs. Also adds a shared "veyron" board directory to share with others having the same baseboard. The config is almost the same as upstream defconfig, but with REMAKE_ELF and POSITION_INDEPENDENT enabled. Untested since I don't have the veyron speedy chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-29u-boot: Add bob chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the ASUS Chromebook Flip C101, also known as "chromebook_bob" in the U-Boot upstream defconfigs. It uses the shared tree for the "gru" baseboard. The config has the following diffconfig from kevin: # chromebook_bob instead of chromebook_kevin DEFAULT_DEVICE_TREE "rk3399-gru-kevin" -> "rk3399-gru-bob" DEFAULT_FDT_FILE "rockchip/rk3399-gru-kevin.dtb" -> "rockchip/rk3399-gru-bob.dtb" OF_LIST "rk3399-gru-kevin" -> "rk3399-gru-bob" SPL_OF_LIST "rk3399-gru-kevin" -> "rk3399-gru-bob" TARGET_CHROMEBOOK_BOB n -> y TARGET_CHROMEBOOK_KEVIN y -> n # Display resolution is 1280x800, and no need for the big font VIDEO_FONT_8X16 n -> y VIDEO_FONT_TER16X32 y -> n VIDEO_ROCKCHIP_MAX_XRES 2400 -> 1280 VIDEO_ROCKCHIP_MAX_YRES 1600 -> 800 Untested since I don't have the bob chromebook. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-28u-boot: Add kevin chromebook configsAlper Nebi Yasak
This adds U-Boot configuration for the Samsung Chromebook Plus (v1), also known as "chromebook_kevin" in the U-Boot upstream defconfigs. Also adds a shared "gru" board directory to share with others having the same baseboard. It uses v2022.07 with some quality-of-life patches. The first one is a clock adjustment to match coreboot clocks for the video output, the second one is a series about text cursor support and larger fonts. These are because the display has a high resolution of 2400x1600 at 12.3". The config has the following diffconfig from the upstream defconfig for this board: # For chainloading from depthcharge like a payload (RW_LEGACY). # Not everything might be necessary, but didn't test without these. INIT_SP_RELATIVE n -> y LNX_KRNL_IMG_TEXT_OFFSET_BASE 0x00200000 -> 0x18000000 POSITION_INDEPENDENT n -> y SYS_TEXT_BASE 0x00200000 -> 0x18000000 +SYS_INIT_SP_BSS_OFFSET 524288 # Higher speeds for eMMC MMC_HS200_SUPPORT n -> y MMC_HS400_ES_SUPPORT n -> y MMC_HS400_SUPPORT n -> y MMC_IO_VOLTAGE n -> y MMC_SDHCI_SDMA n -> y MMC_SPEED_MODE_SET n -> y +MMC_UHS_SUPPORT y # Build the u-boot.elf to use as a payload REMAKE_ELF n -> y # Slightly faster video output VIDEO_COPY n -> y # Larger fonts per the applied series VIDEO_FONT_8X16 y -> n VIDEO_FONT_TER16X32 n -> y Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-27u-boot-libre: Add support for deblobbing U-Boot v2022.07Alper Nebi Yasak
Add a 'v2022.07' pseudo-board for the U-Boot download script with the default blobs list, and mark the version as supported in u-boot-libre release script. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-27download/u-boot: Support reading tree and revision from board.cfgAlper Nebi Yasak
Boards may want to specify a board-specific U-Boot revision. At the very least, pseudo-boards for u-boot-libre releases will need to specify their U-Boot versions somehow. Copy the existing mechanism from download/coreboot for specifying build info with board.cfg files. Specify the commit hash for the 'v2021.07' pseudo-board, and 'master' as the default. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-27download/u-boot: Prepare files per board instead of per revisionAlper Nebi Yasak
The U-Boot download script is designed to help with releasing u-boot-libre and it can only prepare a generic U-Boot v2021.07 tree. However, we will need to build board-specific versions of U-Boot to be able to use it as a coreboot payload effectively. As a first step toward that, make the download script prepare per-board copies of U-Boot v2021.07. Then, add a 'v2021.07' pseudo-board for the u-boot-libre release script to work on. The u-boot-libre deblob script hash ends up chaning due to copying my author attribution from the download script, update its hash. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-08-25u-boot-libre: remove nonfree firmware in drivers/dma/MCD_tasks.cDenis 'GNUtoo' Carikli
This firmware lack corresponding source code. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
2022-02-10Add support for releasing deblobbed u-boot 2020.07 source tarballsDenis 'GNUtoo' Carikli
Once the tarball are released, it will enable distributions to use these tarballs to produce deblobbed u-boot packages. Note that the produced tarball is not reproducible yet. Because of that it has to be trusted. During a release, it's a good idea to sign the uncompressed tarball as the various compression formats and associated tools make different tradeoffs. For instance with xz, xz -9e tends to compress really well with the the most used xz[1] implementation, and most GNU/Linux users probably already have it installed, but and the drawbacks is that the format is very fragile[2]. The lzip format is more suited for long term archiving but its most packaged implementation[3] is less likely to be already installed by users than more well known formats like xz, bzip2 or gzip. Being able to add more compression formats after the release is also useful, for instance to accommodate different build systems or use cases (like being able to build u-boot with less dependencies in distributions like Guix, or building u-boot directly on devices which don't have enough RAM for xz for instance). [1]https://tukaani.org/xz/ [2]https://www.nongnu.org/lzip/xz_inadequate.html [3]https://www.nongnu.org/lzip/ Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>