| Age | Commit message (Collapse) | Author |
|---|
|
it wasn't +x
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Intel GPU!
The AMD ones will be tested, but assume Intel-only for now.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Very nice ivybridge board that supports ECC RAM.
NOTE: I couldn't get onboard graphics working yet, but
this was confirmed working with a graphics card (in my
case nvidia quadra k420) booted in text mode on the SeaBIOS
payload. The GRUB payload also works, when loaded from SeaBIOS.
Therefore, this is a SeaBIOS-only board (as far as first payload
is concerned), but you can pick GRUB from the menu.
You could make it "GRUB-only" in practise by setting SeaBIOS
boot order to only load GRUB, and disable the SeaBIOS menu.
We refer to this as "SeaGRUB".
I've made lbmk use biosutilities and uefiextract, to
get at the SMSC SCH5545 Environmental Control (EC) firmware.
This firmware is needed for fan control. This is automatically
downloaded and extracted, from Dell UEFI firmware updates.
As with other blobs such as Intel ME, this firmware is then
scrubbed by the release build scripts. The blobutil "inject"
script can be used to re-insert it.
Of note: there is no fixed offset, but no other blobs to
be inserted in CBFS either, so the offset when re-inserting
on release ROMs should still be the same, and thus the ROM
checksums should match, when running blobutil inject.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Another ivybridge platform, added in coreboot recently.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
blobdir is incorrect, and it means that the directory
will appear under blobs/, in this case. this was an
oversight on my part.
this behaviour did not break anything in practise, but
this patch makes the behaviour more consistent with rules.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
At present, the logic only tries backup URLs when an
actual download fails (bad internet connection or the
server is down).
If the main download succeeds, but it has a bad checksum,
the backup download is not attempted.
Since wrongly hashed files are to be assumed useless, we
may aswell delete and try the next file. This will guard
against the possibility of a vendor changing their file,
without changing the file name (non-versioned files, for
example, may be subject to such changes).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
ME extraction didn't support unar (RAR format), for regular
extraction, after downloading a vendor file.
For bruteforce ME extraction, after extracting a vendor
archive, unar(RAR) and inno(innoextract) was not supported.
This patch fixes both issues. It should be noted that as of
now, the unar method has only been tested with certain HP
vendor updates, and it's currently not used on any of those.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I messed up the string, when I first did this.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Immediately after the last revision, which was a hacky
workaround to the problem, I realised the actual problem,
and the real solution:
In the switch block, check *backup* first. Then it breaks,
continuing on the iteration.
If it's variable for a main URL, it'll reliably go to the
next check in the block, whereas if it's backup, it'll
default to the first one in each case.
This bug has been annoying the sh*t out of me for ages,
and I've finally nailed it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The script was actually downloading the backup, at
all times, for each given URL. The way we handle
this is quite buggy.
This patch is a workaround, a dirty hack in fact, but
it will do for now, because our backup URLs are always
wayback links where the original URL (matching the
correct main URL in the sources file) is always present,
in the URL.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Make it look like a normal web browser, downloading files.
Some HTTP servers might block Wget unless this is done.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This was an oversight on my part.
Should extraction fail, we must abort. This is in preparation
for addition of future mainboards, where further tweaking is
required in blobutil. This error check will warn us about it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This reverts commit 7c90a4077fa1038394e3d470268ea6e509c2d734.
causes another build bug. i'm helping someone with the bug now,
i think the workaround for now would be to just use bash, on
this script. until i can figure something better out.
|
|
they were outside the scope, outside of the if statements.
in some shells, this is ok.
we use "sh" so the user could have any shell.
be a bit nicer to the more asininely technically
correct sh implementations out there
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Libreboot 20220710 was the last release to support these
boards. I plan to eventually port code differences between
D8/D16 to Dasharo, for KCMA-D8 support in Dasharo, to then
use in Libreboot for both KCMA-D8 and KGPE-D16, but I have
no plans to update the KFSN4-DRE code, at least for now.
Libreboot 20220710 used coreboot 4.11, whereas this patch
makes use of coreboot 4.11_branch; the crossgcc toolchains
no longer compile on modern distros, so I spent time patching
those (tested in Debian Sid, will also work on Arch Linux and
so on).
The acpica downloads now fail, in 4.11_branch, because Intel
made some changes upstream for these tarball downloads. Newer
coreboot works around this by grabbing tarballs from github,
itself a non-ideal solution, but I digress; this patch changes
coreboot crossgcc (in 4.11_branch) to download the acpica
tarball from libreboot rsync, where I've added it.
This patch also re-introduces the PIKE2008 fix, where empty
option ROMs for these are inserted into CBFS. This prevents
SeaBIOS from loading the real option ROMs, which would cause
SeaBIOS to hang. This means that SAS drives are not supported
in SeaBIOS, for these boards in Libreboot.
I previously said, in the Censored Libreboot c20230710
announcement, that I would *only* merge D8/D16 when I've
added Dasharo support to Libreboot, and use that, but the
work to make coreboot 4.11_branch compile is something I'm
quite proud of and I see no reason to exclude from lbmk
master branch.
Honestly, there's not much different than 4.11, code-wise.
I *probably* won't use 4.11_branch for the next Libreboot
release, on D8/D16. By then, I might have Dasharo integrated
in lbmk instead. We shall see.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This error was observed, in the coreboot build system:
In file included from src/lib/version.c:4:
build/build.h:10:32: error: 'libreboot' undeclared here (not in a function)
10 | #define COREBOOT_MAJOR_VERSION libreboot-20230625
| ^~~~~~~~~
src/lib/version.c:35:46: note: in expansion of macro 'COREBOOT_MAJOR_VERSION'
35 | const unsigned int coreboot_major_revision = COREBOOT_MAJOR_VERSION;
| ^~~~~~~~~~~~~~~~~~~~~~
This happened on the 20230625 *release archive*, when a user tried to
build for W541 MRC on an Arch Linux container.
This change fixes the error. I never got the error on my end when
build testing the release archives, but this will prevent the error.
Fix it by only inserting libreboot version string YYYYMMDD representing
the Libreboot version. (libreboot uses ISO dates as version numbers)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I keep getting random linker issues when running:
./build boot roms all
I think the issue lies somewhere in here, from when
I did that massive audit. So I'm undoing the audit
which mostly re-factored the code style here.
These changes are being backported:
f338697b build/boot/roms: Support removing microcode
941fbcb run coreboot utils from own directory
f256ce98 build/boot/roms: say board name on stderr
I removed this change:
6d6bd5ee (the script now uses dedicated utils directory)
additionally:
cbutils is built much earlier on in the script, first
thing after initialising variables
the other changes not backported are all code style
changes, and I believe these are responsible.
if no other fixes occur to this fire before the next
libreboot release, then my hunch was right.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
That way, I can more easily debug build issues with
specific boards, e.g.
./build boot roms all 2>lbmk.err.log
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
don't clean it, distclean it
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this means coreboot can now be distcleaned safely,
before and after each build of a rom image
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
fixes ./build boot roms all
in detect_firmware(), "set" is used to get values from
configs, to know if things like ME/MRC are needed
on some "board" configs under resources/coreboot/, no
actual coreboot configs are provided, because they are
used as a reference (coreboot revision, tree name etc)
for actual boards, with actual coreboot configs
when attempting to build for such a board, running "set"
on such non-existent files would cause a non-zero exit,
when we want zero. the non-zero exit then caused the
build/boot/roms command to fail, when running "all" if
it found, for example, resources/coreboot/cros/ which
has the above problem, in this context
work around it by verifying that coreboot configs exist
for the given target name, in the blobutil download script.
if no such configs exist, then exit zero (success)
doing so is correct, because the script is intended to
do just that, erroring only if it is detected that blobs
are needed for a given board, but other errors occur; if
no coreboot configs exist, then no roms will be built and,
therefore, no blobs are needed
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
will pass all args as a single arg, which is wrong
fix that
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Riku_V/lbmk:dl_cache into master
Reviewed-on: https://codeberg.org/libreboot/lbmk/pulls/81
|
|
From now on, the following rules are available for all
mainboards, in resources/coreboot/boardname/board.cfg:
* blobs_required="n" or "y"
* microcode_required="n" or "y"
The blobs setting, if set to "n", simply renames filename.rom to
filename_noblobs.rom.
The microcode setting, if set to "n", copies the ROM (with or
without _noblobs) to filename_nomicrocode.rom (if blobs="n",
it would be filename_noblobs_nomicrocode.rom).
Where "nomicrocode" is set, ROMs with microcode will still be
provided by lbmk and in relesase, but ROMs will also be provided
alongside it that lacks any microcode updates.
If the *original* ROM already lacks microcode updates, then the
original ROM will be *renamed* to include "nomicrocode" in the name.
This is done on images for ARM platforms, for instance, where
microcode is never used whatsoever.
Example filenames now generated:
seabios_e6400_4mb_libgfxinit_corebootfb_noblobs_nomicrocode.rom
seabios_e6400_4mb_libgfxinit_corebootfb_noblobs.rom
seabios_withgrub_hp8300usdt_16mb_libgfxinit_corebootfb_colemak_nomicrocode.rom
seabios_withgrub_hp8300usdt_16mb_libgfxinit_corebootfb_colemak.rom
uboot_payload_gru_kevin_libgfxinit_corebootfb_noblobs_nomicrocode.rom
A vocal minority of people were not happy with some of the changes
made in Libreboot last year, including on existing supported
hardware from before those changes were made. I did this before the
last release, out of respect:
https://libreboot.org/news/gm45microcode.html
(re-add mitigations for no-microcode setup on GM45)
This new change is done as an further, extended courtesy. Tested
and works fine. (testing using cbfstool-print)
Actual Libreboot policy about binary blobs is nuanced. See:
https://libreboot.org/news/policy.html (reduction policy) and:
https://libreboot.org/freedom-status.html (implementation)
Well, the status page talks about descriptor vs non-descriptor
on Intel platforms, and where me_cleaner is used (on platforms
that need Intel ME firmware), it regards the descriptored setups
to be blob-free if coreboot does not require binary blobs.
In this paradigm, microcode updates are not considered to be
binary blobs, because they aren't technically software, they're
more like config files that just turn certain features on or off
within the CPU.
However, for lbmk purposes, "noblobs" means that, after the ROM
is fully ready to flash on the chip, there will be no blobs in
it (except microcode). So for example, an X200 that does not
require ME firmware is considered blob-free under this paradigm,
even though Libreboot policy regards X230 as equally libre when
me_cleaner is used; in this setup, ROMs will not contain "blobfree"
in the filename, for X230 (as one example).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Since many boards use the same ME firmware, we could save
everyone's bandwidth and time by caching the update files.
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
This reverts commit a4ea2867319471d9fe7d4ee540881e0286b4d3cf.
The licensing audit has been abandoned. I will not be re-licensing
in bulk to MIT.
I can still use MIT license on new works, e.g. utilities, but there's
really no pressing need to re-license lbmk. It's just shell scripts,
and most of what it interacts with (coreboot, grub, seabios) is GPL
anyway.
So who cares?
Ferass's patch was removed due to refusal to re-license, but the
decision to re-license has been canceled.
I'm now aiming for a quick stable release.
|
|
make blobutil a symlink. Example of command changes:
./blobutil download x220_8mb
is now:
./update blobs download x220_8mb
The old command still works, for compatibility.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
move resources/scripts/download/ to:
resources/scripts/update/module/
This: ./download coreboot
Is now: ./update module coreboot
However, running "./download coreboot"
still works, via backwards compatibility.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The primary purpose of my intense auditing has
been to improve lbmk's coding style and fix bugs
but there is a secondary purpose: know precisely
who owns what, because I want to re-license as
much as possible of lbmk under *MIT*, instead of
the current GNU licensing. MIT is vastly superior,
because it grants *actual* freedom to the user,
permits *sublicensing* and it is vastly more
compatible with other GPL combinations; for
example, MIT license is compatible with GPL2-only
whereas lbmk's current mix of GPLv3-or-later and
GPLv3-only is legally incompatible with GPLv2-only.
Re-licensing under MIT will most likely result in
more contributions to Libreboot's build system in
the future, especially as it will attract a lot
more commercial interest. Contrary to the popular
arguments, copyleft is a liability to the free
software movement and results in less code being
written; in practise, permissively licensed code
gets more public contributions, including from
commercial entities, even if companies can
theoretically make something proprietary out of
it (in practise, anyone inclined can just use the
upstream and proprietary forks almost always die).
Copyleft propaganda is fundamentally flawed. See:
<https://unixsheikh.com/articles/the-problems-with-the-gpl.html>
Anyway, I've been doing a combination of:
* Seeking permission from other copyright holders,
for re-licensing
* Deleting, or moving, other contributions; for
example, splitting certain contributions into
separate files so that originally modified files
become unencumbered. This latter solution is a
result of *code cleanup* arising from the audit.
For Ferass's contributions, I opted to seek
*permission*, and permission was denied. In full compliance
with this legal imperative, I'm acting accordingly; this
commit removes all of Ferass's changes that converted lbmk
to posix shell scripts, thus removing his copyright on the
affected files, bypassing his authority entirely. Therefore,
lbmk is largely now bash-dependent. In practise, nobody is
going to use anything other than a GNU system to build
Libreboot, because many projects that Libreboot makes use
of rely heavily on GNU; for example, coreboot's build
system makes heavy use of GNU-specific extensions in *GNU
Make*, and likely contains many bashisms. Of course,
Libreboot also compiles GNU GRUB.
I would much rather have MIT-licensed Bash scripts
than GPL-licensed posix SCL scripts.
This reverts the changes from Ferass El Hafidi,
for the following commits, with some exceptions:
* 7f5dfebf7d37c56d9c7993aaa17c59070cb5aec9
* f787044642236917c9c4dbcaa48a6b0648097db0
Exception:
download/mrc not reverted, because that was
already a fork of an existing script under
coreboot's build system, and their script was
GPLv2. i cannot/will not re-license this file
(ergo,
7f5dfebf7d37c56d9c7993aaa17c59070cb5aec9
change remains intact, on this file)
resources/scripts/build/boot/roms_helper, these changes
have been kept:
* 7e6691e9 - Add ARMv7 and AArch64 support
* dec2d720 - add myself in the build/roms_helper script
(added 2021 copyright for the change below)
* b7405656 - Workaround for grub's slow boot
^ these changes will be re-factored, splitting them
out of the file into a new file. This will be done in
a future lbmk revision. (in some cases, it makes sense
to keep a change but split it, allowing the main file to
be re-licensed without the change in it)
This is part of a much larger series of
licensing audits. It's likely that lbmk will
be posix-compliant (in its shell scripts)
again some day, because I'm planning to rewrite
most of these scripts (the ones modified in this
patch), and many of them (e.g. individual download
scripts) are subject to future deletion in a planned
overhaul of the download logic for third party
projects.
In addition: these changes are being kept (no attempt
to re-license them will be made):
* cff081c6 - Fix grub's slow boot (1 year, 5 months ago) <Vitali64>
* 4c851889 - Add macbook*1 16mb configs (1 year, 6 months ago) <Vitali64>
Ferass's work that remains will be split into dedicated
files containing them, where feasible.
In the case of grub.cfg (for GNU GRUB), I don't care
because it's a script for an engine (GRUB shell) that's
under GPL anyway, so who really cares about MIT license.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
|
|
it is not necessary to have help output
similarly, listing all boards in this script is
pointless. why not just run ls -1 on the directory?
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
tabs for indentation
simplify some checks
|
|
this also fixes error handling
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
main() on top
top-down order of logic
logic split into separate functions
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
