| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
an oversight, in a previous edit
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
use build/src/for -c which does the same thing,
specifically: try distclean, then clean, or fail
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
lbmk is much more likely to crash now, in error conditions,
which is a boon for further auditing.
also: in "fetch", remove the downloaded program
if fail() was called.
this would also be done for gnulib, when downloading
grub, but done in such a way that gnulib goes first.
where calls to err write "ERROR" in the string, they
no longer say "ERROR" because the "err" function itself
now does that automatically.
also: listmodes/listoptions (in "lbmk") now reports an
error if no scripts and/or directories are found.
also: where a warning is given, but not an error, i've
gone through in some places and redirected the output
to stderr, not stdout
as part of error checks: running anything as root, except
for the "./build dependencies *" commands, is no longer
permitted and lbmk will throw an error
mrc downloads: debugfs output no longer redirected to /dev/null,
and stderr no longer redirected to stdout. everything is verbose.
certain non-error states are also more verbose. for example,
patch_rom in blobs/inject will now state when injection succeeds
certain actual errors(bugs) were fixed:
for example, build/release/roms now correctly prepares the blobs
hash files for a given target, containing only the files and
checksums in the list. Previously, a printf message was included.
Now, with this new code: blobutil/inject rightly verifies hashes.
doing all of this in one giant patch is cleaner
than 100 patches changing each file. even this is yet part
of a much larger audit going on in the Libreboot project.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
there were stragglers left over from the last audit,
and these stragglers still exist even after all the
major re-factoring as of late
the new style is: bsd-like coding style and error
handling. verbose yet simple error handling. we use
an "err" function in a way reminiscent of most C
programs that you see in openbsd base (err.h)
this style is very clean, resulting in readable code
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
this same change has been applied, selectively, to
certain return statements. the general rule is this:
the return statement should only be used to direct
logic within a script, where certain non-errors
states are used to skip certain actions; the exit
command should *never* be used to return non-zero,
except by err(). in so doing, we ensure easier
debugging of the build system
also: strip_rom_image in build/release/roms was
running "continue" when a rom file didn't exist,
despite not being a while/for loop. i make it
return (non-error condition) instead
it's ok for a script to exit 0, where appropriate,
but perhaps a function could also be written for it
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
moving it defeats the purpose of the caching mechanism
that's in place. this should avoid unnecessary downloads
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
include/err.sh
this new handling also does mundane things,
such as tell you what script b0rked
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
uses 32-bit variant for x86_32 arch. 64-bit for x86_64.
resources/scripts/build/src/for:
modified it a bit. when building e.g. "memtest86plus/build32"
it correctly fetches "memtest86plus" instead.
but builds memtest86plus/build32, which is inside that git repo
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
in update/blobs/download, i saw instances where
appdir was being deleted with rm -r, but the more
appropriate command would rm -Rf. this is now fixed.
other than that, i've mostly just simplified a bunch
of if statements and consolidated some duplicated
logic (e.g. if/else block for dependencies in
build_dependencies() of update/blobs/download
one or two functions and/or variables have been
renamed, for greater clarity in the code, also
removed a few messages that were redundant
used printf instead of echo, in a few places, also
fixed up the indentation in a few places
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
they fundamentally perform the same action: copy
the .config file and run make, but build runs
make-all, while modify runs make-oldconfig or
make-menuconfig
merge this functionality together
also:
./handle config file
^ this is the new syntax, not:
./build defconfig for
for example:
./handle config file -b coreboot x200_8mb <-- build x200 rom
./handle config file -m coreboot x200_8mb <-- modify configs
./handle config file -u coreboot x200_8mb <-- make-oldconfig
./handle config file -u seabios
./handle config file -b u-boot
yes, 1 script and a sloccount reduction of 52. and the audit?
it continues.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
the unified logic is so small that i simply added it
to the main "build" script
commands are identical. example:
./build dependencies debian
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
handle it all in the 1 script
quite a few clean scripts are still present,
so resources/scripts/build/clean/ still exists.
23 sloc reduction.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Some of them weren't even used at all, such as the flashrom
build script. the bios_extract build script existed but was
never used, because we only called (from blobutil) a python
script from in there, without actually compiling anything!
resources/script/build/src/for
Usage, e.g.:
./build src for memtest86plus
It also handles fetch. This script is intended largely for
those codebases that are quite simple, requiring trivial
or no intervention besides running "make".
37 sloc reduction. Not a lot, but the audit continues! These
optimisations add up. I started at 3300 sloc in
resources/scripts and me target is 2k (2000) sloc.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
new commands are thus,
build grub payloads:
./build grub payload
(formerly ./build payload grub)
build grub utils:
./build grub utils
(formerly ./build module grub)
The scripts is build/module/ will mostly be
deleted. I say mostly, because some of them
are being moved instead.
The deleted ones will be ones that basically
just run "make" in the target directory. They
will be unified, in a follow-up patch.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
./update seabios configs? gone
.modify coreboot configs? gone
it's now all 1 script, called e.g.
./modify defconfig options -u coreboot <-- runs make oldconfig
./modify defconfig options -m seabios <-- runs make menuconfig
./modify defconfig options -u u-boot gru_bob <-- oldconfig, and only gru_bob
./modify defconfig options -u coreboot x60 x200_8mb
etc. you get the idea. same behaviour as before with all
the separate scripts, but now its one unified script.
184 sloc reduction in resources/scripts/
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
See file:
resources/scripts/build/defconfig/for
It is based on:
resources/scripts/build/payload/u-boot
The u-boot payload script has been deleted, as has the
seabios payload script; the build/boot/roms logic has
been heavily simplified too, by removing the logic for
building of elf files based on defconfig.
SeaBIOS, U-Boot and coreboot all use defconfig-type
infrastructure for their build systems, and they are
fundamentally the *same* in how to compile each codebase,
at least in an lbmk context, regardless of actual (and
very huge) differences in these codebases.
Several hundred sources-lines of code have been eliminated
by this change, drastically simplifying everything; U-Boot
payload compiling also now errors out when a single build
fails, instead of continuing. Also: build/boot/roms no longer
re-compiles a coreboot target that was already compiled,
which is the same behaviour observed for payloads.
(this means you must now manually delete a target, when you
wish to re-build it; the build/boot/roms logic now more or
less just runs cbfstool; blobutil is handled from
build/defconfig/for)
ALSO: Since crossgcc is now handled by build/defconfig/for, not
build/boot/roms, standalone compiling of u-boot is now possible.
This has been tested. You compile it like so:
./build defconfig for u-boot
or specific trees, e.g.
./build defconfig for u-boot default
One other consequence of this patch is that re-building the same
ROM image is now much faster, because the same builds are re-used
unless deleted. This could be useful when testing grub.cfg changes,
for example, if that's all you change. With things like ccache used
(not yet used robustly in lbmk), this could speed things up more,
depending on the codebase.
This patch demonstrates the raw power of lbmk; it is a very
simple and highly efficient build system, and now much more so!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it's bloat, and was only there for backwards compatibility
with the old commands, but the new commands are e.g.
./update blobs inject
instead of:
./blobutil inject
this results in a slight code size reduction in lbmk
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
most of them were just calling the gitclone script,
so remove them.
the grub script was treating gnulib as a dependency.
i've now added the ability to grab 1 dependency, in
the gitclone script (it should be expanded later to
support multiple dependencies)
the gitclone script has been renamed to "fetch".
the "fetch_trees" script does more or less the same
thing, but calls "fetch" and handles multiple revisions
if a project needs that
this is more efficient, and slightly reduces the code
size of lbmk!
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
make it output messages that tell the user important
information. it's only subtle but it makes a difference
to some people, who need confirmation.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
they are fundamentally the same, in an lbmk context.
they are downloaded in the same way, and compiled in
the same way!
(Kconfig infrastructure, board-specific code, the way
submodules are used in git, etc)
~200 sloc reduction in resources/scripts
the audit begins
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
it wasn't +x
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Intel GPU!
The AMD ones will be tested, but assume Intel-only for now.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Very nice ivybridge board that supports ECC RAM.
NOTE: I couldn't get onboard graphics working yet, but
this was confirmed working with a graphics card (in my
case nvidia quadra k420) booted in text mode on the SeaBIOS
payload. The GRUB payload also works, when loaded from SeaBIOS.
Therefore, this is a SeaBIOS-only board (as far as first payload
is concerned), but you can pick GRUB from the menu.
You could make it "GRUB-only" in practise by setting SeaBIOS
boot order to only load GRUB, and disable the SeaBIOS menu.
We refer to this as "SeaGRUB".
I've made lbmk use biosutilities and uefiextract, to
get at the SMSC SCH5545 Environmental Control (EC) firmware.
This firmware is needed for fan control. This is automatically
downloaded and extracted, from Dell UEFI firmware updates.
As with other blobs such as Intel ME, this firmware is then
scrubbed by the release build scripts. The blobutil "inject"
script can be used to re-insert it.
Of note: there is no fixed offset, but no other blobs to
be inserted in CBFS either, so the offset when re-inserting
on release ROMs should still be the same, and thus the ROM
checksums should match, when running blobutil inject.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Another ivybridge platform, added in coreboot recently.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
blobdir is incorrect, and it means that the directory
will appear under blobs/, in this case. this was an
oversight on my part.
this behaviour did not break anything in practise, but
this patch makes the behaviour more consistent with rules.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
At present, the logic only tries backup URLs when an
actual download fails (bad internet connection or the
server is down).
If the main download succeeds, but it has a bad checksum,
the backup download is not attempted.
Since wrongly hashed files are to be assumed useless, we
may aswell delete and try the next file. This will guard
against the possibility of a vendor changing their file,
without changing the file name (non-versioned files, for
example, may be subject to such changes).
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
ME extraction didn't support unar (RAR format), for regular
extraction, after downloading a vendor file.
For bruteforce ME extraction, after extracting a vendor
archive, unar(RAR) and inno(innoextract) was not supported.
This patch fixes both issues. It should be noted that as of
now, the unar method has only been tested with certain HP
vendor updates, and it's currently not used on any of those.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I messed up the string, when I first did this.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Immediately after the last revision, which was a hacky
workaround to the problem, I realised the actual problem,
and the real solution:
In the switch block, check *backup* first. Then it breaks,
continuing on the iteration.
If it's variable for a main URL, it'll reliably go to the
next check in the block, whereas if it's backup, it'll
default to the first one in each case.
This bug has been annoying the sh*t out of me for ages,
and I've finally nailed it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
The script was actually downloading the backup, at
all times, for each given URL. The way we handle
this is quite buggy.
This patch is a workaround, a dirty hack in fact, but
it will do for now, because our backup URLs are always
wayback links where the original URL (matching the
correct main URL in the sources file) is always present,
in the URL.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Make it look like a normal web browser, downloading files.
Some HTTP servers might block Wget unless this is done.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This was an oversight on my part.
Should extraction fail, we must abort. This is in preparation
for addition of future mainboards, where further tweaking is
required in blobutil. This error check will warn us about it.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This reverts commit 7c90a4077fa1038394e3d470268ea6e509c2d734.
causes another build bug. i'm helping someone with the bug now,
i think the workaround for now would be to just use bash, on
this script. until i can figure something better out.
|
|
they were outside the scope, outside of the if statements.
in some shells, this is ok.
we use "sh" so the user could have any shell.
be a bit nicer to the more asininely technically
correct sh implementations out there
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Libreboot 20220710 was the last release to support these
boards. I plan to eventually port code differences between
D8/D16 to Dasharo, for KCMA-D8 support in Dasharo, to then
use in Libreboot for both KCMA-D8 and KGPE-D16, but I have
no plans to update the KFSN4-DRE code, at least for now.
Libreboot 20220710 used coreboot 4.11, whereas this patch
makes use of coreboot 4.11_branch; the crossgcc toolchains
no longer compile on modern distros, so I spent time patching
those (tested in Debian Sid, will also work on Arch Linux and
so on).
The acpica downloads now fail, in 4.11_branch, because Intel
made some changes upstream for these tarball downloads. Newer
coreboot works around this by grabbing tarballs from github,
itself a non-ideal solution, but I digress; this patch changes
coreboot crossgcc (in 4.11_branch) to download the acpica
tarball from libreboot rsync, where I've added it.
This patch also re-introduces the PIKE2008 fix, where empty
option ROMs for these are inserted into CBFS. This prevents
SeaBIOS from loading the real option ROMs, which would cause
SeaBIOS to hang. This means that SAS drives are not supported
in SeaBIOS, for these boards in Libreboot.
I previously said, in the Censored Libreboot c20230710
announcement, that I would *only* merge D8/D16 when I've
added Dasharo support to Libreboot, and use that, but the
work to make coreboot 4.11_branch compile is something I'm
quite proud of and I see no reason to exclude from lbmk
master branch.
Honestly, there's not much different than 4.11, code-wise.
I *probably* won't use 4.11_branch for the next Libreboot
release, on D8/D16. By then, I might have Dasharo integrated
in lbmk instead. We shall see.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
This error was observed, in the coreboot build system:
In file included from src/lib/version.c:4:
build/build.h:10:32: error: 'libreboot' undeclared here (not in a function)
10 | #define COREBOOT_MAJOR_VERSION libreboot-20230625
| ^~~~~~~~~
src/lib/version.c:35:46: note: in expansion of macro 'COREBOOT_MAJOR_VERSION'
35 | const unsigned int coreboot_major_revision = COREBOOT_MAJOR_VERSION;
| ^~~~~~~~~~~~~~~~~~~~~~
This happened on the 20230625 *release archive*, when a user tried to
build for W541 MRC on an Arch Linux container.
This change fixes the error. I never got the error on my end when
build testing the release archives, but this will prevent the error.
Fix it by only inserting libreboot version string YYYYMMDD representing
the Libreboot version. (libreboot uses ISO dates as version numbers)
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
I keep getting random linker issues when running:
./build boot roms all
I think the issue lies somewhere in here, from when
I did that massive audit. So I'm undoing the audit
which mostly re-factored the code style here.
These changes are being backported:
f338697b build/boot/roms: Support removing microcode
941fbcb run coreboot utils from own directory
f256ce98 build/boot/roms: say board name on stderr
I removed this change:
6d6bd5ee (the script now uses dedicated utils directory)
additionally:
cbutils is built much earlier on in the script, first
thing after initialising variables
the other changes not backported are all code style
changes, and I believe these are responsible.
if no other fixes occur to this fire before the next
libreboot release, then my hunch was right.
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
|
That way, I can more easily debug build issues with
specific boards, e.g.
./build boot roms all 2>lbmk.err.log
Signed-off-by: Leah Rowe <leah@libreboot.org>
|
